Summary:
This patch introduces a switch, based on the environment variable
`LLDB_USE_LLDB_SERVER`, to determine whether to use the `ProcessWindows` plugin
(the old way) or the `lldb-server` way for debugging on Windows.
Reviewers: labath, amccarth, asmith, stella.stamenova
Reviewed By: labath, amccarth
Subscribers: mstorsjo, abidh, JDevlieghere, lldb-commits, leonid.mashinskiy
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68258
llvm-svn: 374325
Summary:
This patch adds support of watchpoints to the old `ProcessWindows` plugin.
The `ProcessWindows` plugin uses the `RegisterContext` to set and reset
watchpoints. The `RegisterContext` has some interface to access watchpoints,
but it is very limited (e.g. it is impossible to retrieve the last triggered
watchpoint with it), that's why I have implemented a slightly different
interface in the `RegisterContextWindows`. Moreover, I have made the
`ProcessWindows` plugin responsible for search of a vacant watchpoint slot,
because watchpoints exist per-process (not per-thread), then we can place
the same watchpoint in the same slot in different threads. With this scheme
threads don't need to have their own watchpoint lists, and it simplifies
identifying of the last triggered watchpoint.
Reviewers: asmith, stella.stamenova, amccarth
Reviewed By: amccarth
Subscribers: labath, zturner, leonid.mashinskiy, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67168
llvm-svn: 371166
Patch by Martin Andersson (martin.andersson@evoma.se)
If the process is resumed before the state is changed to "running"
there is a possibility (when single stepping) that the debugger stops
and changes the state to "stopped" before it is first changed to
"running". This causes the process to ignore the stop event (since
the state did not change) which in turn leads the DebuggerThread to
wait indefinitely for the exception predicate in HandleExceptionEvent.
Differential Revision: https://reviews.llvm.org/D62183
llvm-svn: 366703
Summary:
This change extracts functionalities from processwindows into a
introduced processdebugger that can be reused in native process
debugging.
The main reason is that the native process debugging
can't directly be based on processwindows or be implemented
as a pass-through to this plugin since the plugin has ties to
Target and Process classes that are needed in host debugging but
not necessary in native debugging.
Reviewers: labath, Hui, jfb, clayborg, amccarth
Reviewed By: labath
Subscribers: amccarth, dexonsmith, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D63166
llvm-svn: 364210
Summary:
Dump more information about "access violation" and "in page error" exceptions to
description. Description now contains data about read/write violation type and
actual address as described at
https://docs.microsoft.com/en-us/windows/desktop/api/winnt/ns-winnt-_exception_record
Reviewers: asmith, stella.stamenova
Reviewed By: stella.stamenova
Subscribers: teemperor, amccarth, abidh, lldb-commits, aleksandr.urakov
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D60519
llvm-svn: 359420
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
Add a flag to control whether the ModulesDidLoad notification is
called when a module is added. If the notifications are disabled,
the caller must call ModulesDidLoad after adding all the new modules,
but postponing this notification until they're all batched up can
allow for better efficiency than notifying one-by-one.
Change the name of the ModuleList notifier functions that a subclass
can implement to start with 'Notify' to make it clear what they are.
Add a NotifyModulesRemoved.
Add header documentation for the changed/updated methods.
Added defaulted-value 'notify' argument to ModuleList Append,
AppendIfNeeded, and Remove because callers working with a local
ModuleList don't have an obvious idea of what notify means in this
context. When the ModuleList is a part of the Target class, the
notify behavior matters.
DynamicLoaderDarwin has been updated so that libraries being
added/removed are correctly batched up before notifications are
sent. Added the TestModuleLoadedNotifys.py test to run on
Darwin to test this.
<rdar://problem/48293064>
Differential Revision: https://reviews.llvm.org/D60172
llvm-svn: 357955
Summary:
This commit modifies the OnLoadModule method to resolve the module
unless we already have one
Change by Hui Huang to fix the failing LLDB tests on Windows
Reviewers: labath, asmith
Subscribers: abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D58303
llvm-svn: 354172
Summary:
When a process is loaded, update its sections with the load address to resolve any created breakpoints. For the remote debugging case, the debugged process is launched remotely so GetLoadAddress is intended to pass the load address from remote to LLDB (client).
Reviewers: zturner, llvm-commits, clayborg, labath
Reviewed By: labath
Subscribers: mgorny, sas, Hui, clayborg, labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D56237
llvm-svn: 354099
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
This patch contains several small fixes, which makes it possible to evaluate
expressions on Windows using information from PDB. The changes are:
- several sanitize checks;
- make IRExecutionUnit::MemoryManager::getSymbolAddress to not return a magic
value on a failure, because callers wait 0 in this case;
- entry point required to be a file address, not RVA, in the ObjectFilePECOFF;
- do not crash on a debuggee second chance exception - it may be an expression
evaluation crash. Also fix detection of "crushed" threads in tests;
- create parameter declarations for functions in AST to make it possible to call
debugee functions from expressions;
- relax name searching rules for variables, functions, namespaces and types. Now
it works just like in the DWARF plugin;
- fix endless recursion in SymbolFilePDB::ParseCompileUnitFunctionForPDBFunc.
Reviewers: zturner, asmith, stella.stamenova
Reviewed By: stella.stamenova, asmith
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53759
llvm-svn: 348136
1. In ProcessWindows if we fail to allocate memory, we need to return LLDB_INVALID_ADDRESS rather than 0 or nullptr as that is the invalid address that LLDB looks for
2. In RegisterContextWindows in ReadAllRegisterValues, always create a new buffer. This is what the other platforms do and data_sp is always null in all tested scenarios on Windows as well
llvm-svn: 348055
This reverts commit dec87759523b2f22fcff3325bc2cd543e4cda0e7.
This commit caused the tests on Windows to run forever rather than complete.
Reverting until the commit can be fixed to not stall.
llvm-svn: 348009
Summary:
This patch contains several small fixes, which makes it possible to evaluate
expressions on Windows using information from PDB. The changes are:
- several sanitize checks;
- make IRExecutionUnit::MemoryManager::getSymbolAddress to not return a magic
value on a failure, because callers wait 0 in this case;
- entry point required to be a file address, not RVA, in the ObjectFilePECOFF;
- do not crash on a debuggee second chance exception - it may be an expression
evaluation crash;
- create parameter declarations for functions in AST to make it possible to call
debugee functions from expressions;
- relax name searching rules for variables, functions, namespaces and types. Now
it works just like in the DWARF plugin;
- fix endless recursion in SymbolFilePDB::ParseCompileUnitFunctionForPDBFunc.
Reviewers: zturner, asmith, stella.stamenova
Reviewed By: stella.stamenova, asmith
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53759
llvm-svn: 347962
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
Replace calls to LLVM's is_directory with calls to LLDB's FileSytem
class. For this I introduced a new convenience method that, like the
other methods, takes either a path or filespec. This still uses the LLVM
functions under the hood.
Differential revision: https://reviews.llvm.org/D54135
llvm-svn: 346375
There were some calls left to Exists() on non-darwin platforms (Windows,
Linux and FreeBSD) that weren't yet updated to use the FileSystem.
llvm-svn: 345857
Summary:
This patch adds a basic implementation of `DoAllocateMemory` and
`DoDeallocateMemory` for Windows processes. For now it considers only the
executable permission (and always allows reads and writes).
Reviewers: zturner, asmith, stella.stamenova, labath, clayborg
Reviewed By: zturner
Subscribers: Hui, vsk, jingham, aleksandr.urakov, clayborg, abidh, teemperor, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D52618
llvm-svn: 345815
Summary:
If the process exits before any initial stop then notify the debugger
of the error otherwise WaitForDebuggerConnection() will be blocked.
An example of this issue is when a process fails to load a dependent DLL.
In addition to the fix, remove a duplicate call to FreeProcessHandles() in
DebuggerThread::HandleExitProcessEvent() and use decimal format
for all thread IDs.
Reviewers: rnk, zturner, aleksandr.urakov
Reviewed By: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D53090
llvm-svn: 344168
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary: When ReadProcessMemory fails, bytes_read is sometimes set to a large garbage value. In that case, we need to set it back to zero before returning or the garbage value will be used to allocate memory later causing LLDB to crash with an out of memory error.
Reviewers: asmith, zturner
Reviewed By: zturner
Subscribers: zturner, asmith, stella.stamenova, llvm-commits
Differential Revision: https://reviews.llvm.org/D49159
llvm-svn: 336865
Summary:
test_set_working_dir was testing two scenario: failure to set the working dir because of a non existent directory and succeeding to set the working directory. Since the negative case fails on both Linux and Windows, the positive case was never tested. I split the test into two which allows us to always run both the negative and positive cases. The positive case now succeeds on Linux and the negative case still fails.
During the investigation, it turned out that lldbtest.py will try to execute a process launch command up to 3 times if the command failed. This means that we could be covering up intermittent failures by running any test that does process launch multiple times without ever realizing it. I've changed the counter to 1 (though it can still be overwritten with the environment variable).
This change also fixes both the positive and negative cases on Windows. There were a few issues:
1) In ProcessLauncherWindows::LaunchProcess, the error was not retrieved until CloseHandle was possibly called. Since CloseHandle is also a system API, its success would overwrite any existing error that could be retrieved using GetLastError. So by the time the error was retrieved, it was now a success.
2) In DebuggerThread::StopDebugging TerminateProcess was called on the process handle regardless of whether it was a valid handle. This was causing the process to crash when the handle was LLDB_INVALID_PROCESS (0xFFFFFFFF).
3) In ProcessWindows::DoLaunch we need to check that the working directory exists before launching the process to have the same behavior as other platforms which first check the directory and then launch process. This way we also control the exact error string.
Reviewers: labath, zturner, asmith, jingham
Reviewed By: labath
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48050
llvm-svn: 334642
Summary:
Occasionally, when launching a process in lldb (especially on windows, but not limited to), lldb will hang before the process is launched and it will never recover. This happens because the timing of the processing of the state changes can be slightly different. The state changes that are issued are:
1) SetPublicState(eStateLaunching)
2) SetPrivateState(eStateLaunching)
3) SetPublicState(eStateStopped)
4) SetPrivateState(eStateStopped)
What we expect to see is:
public state: launching -> launching -> stopped
private state: launching -> stopped
What we see is:
public state: launching -> stopped -> launching
private state: launching -> stopped
The second launching change to the public state is issued when WaitForProcessStopPrivate calls HandlePrivateEvent on the event which was created when the private state was set to launching. HandlePrivateEvent has logic to determine whether to broadcase the event and a launching event is *always* broadcast. At the same time, when the stopped event is processed by WaitForProcessStopPrivate next, the function exists and that event is never broadcast, so the public state remains as launching.
HandlePrivateEvent does two things: determine whether there's a next action as well as determine whether to broadcast the event that was processed. There's only ever a next action set if we are trying to attach to a process, but WaitForProcessStopPrivate is only ever called when we are launching a process or connecting remotely, so the first part of HandlePrivateEvent (handling the next action) is irrelevant for WaitForProcessStopPrivate. As far as broadcasting the event is concerned, since we are handling state changes that already occurred to the public state (and are now duplicated in the private state), I believe the broadcast step is unnecessary also (and in fact, it causes the hang).
This change removes the call to HandlePrivateEvent from inside WaitForProcessStopPrivate.
Incidentally, there was also a bug filed recently that is the same issue: https://bugs.llvm.org/show_bug.cgi?id=37496
Reviewers: asmith, labath, zturner, jingham
Reviewed By: zturner, jingham
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47609
llvm-svn: 333781
Summary: The function ResumeThread on Windows returns a DWORD which is an unsigned int. In TargetThreadWindows::DoResume, there's code that determines how many times to call ResumeThread based on whether the return value is greater than 0. Since the function returns -1 (as an unsigned int) on failure, this was getting stuck in an infinite loop if ResumeThread failed for any reason. The correct thing to do is check whether the return value is -1 and then return the appropriate error instead of ignoring the return value.
Reviewers: asmith, zturner, labath
Reviewed By: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47020
llvm-svn: 332670
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
This adjusts header file includes for headers and source files
in Core. In doing so, one dependency cycle is eliminated
because all the includes from Core to that project were dead
includes anyway. In places where some files in other projects
were only compiling due to a transitive include from another
header, fixups have been made so that those files also include
the header they need. Tested on Windows and Linux, and plan
to address failures on OSX and FreeBSD after watching the
bots.
llvm-svn: 299714
Summary:
The main difference here is that in the WINLOG macros you can specify
log categories per call, whereas here you have to go the usual lldb
route of getting a Log* variable first. While this means you have to
write at least two statements, it usually means that each statement will
fit on a single line, whereas fitting the WINLOG invocation on a single
line was almost impossible. So the total size of code does not increase
even in functions with a single log statement, and functions with more
logging get shorter.
The downside here is reduced flexibility in specifying the log
categories, which a couple of functions used quite heavily (e.g.
RefreshStateAfterStop). For these I chose a single category used most
prominently and put everything into that, although a solution with
multiple log variables is definitely possible.
Reviewers: zturner, amccarth
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30172
llvm-svn: 295822
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
The Windows process plugin was broken up into multiple pieces a while back in
order to share code between debugging live processes and minidumps
(postmortem) debugging. The minidump portion was replaced by a cross-platform
solution. This left the plugin split into a formerly "common" base classes and
the derived classes for live debugging. This extra layer made the code harder
to understand and work with.
This patch simplifies these class hierarchies by rolling the live debugging
concrete classes up to the base classes. Last week I posted my intent to make
this change to lldb-dev, and I didn't hear any objections.
This involved moving code and changing references to classes like
ProcessWindowsLive to ProcessWindows. It still builds for both 32- and 64-bit,
and the tests still pass on 32-bit. (Tests on 64-bit weren't passing before
this refactor for unrelated reasons.)
llvm-svn: 287770
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
to each other. This should remove some infrequent teardown crashes when the
listener is not the debugger's listener.
Processes now need to take a ListenerSP, not a Listener&.
This required changing over the Process plugin class constructors to take a ListenerSP, instead
of a Listener&. Other than that there should be no functional change.
<rdar://problem/24580184> CrashTracer: [USER] Xcode at …ework: lldb_private::Listener::BroadcasterWillDestruct + 39
llvm-svn: 262863
Aleksandr Urakov