tracked. Instead of trying to manually keep track of these locations
while doing complex modifications, just recompute them when they're needed.
This fixes a bug in which the TopMBB and BotMBB were not correctly updated,
leading to invalid transformations.
llvm-svn: 84598
appropriate restore location for the spill as well as perform the actual
save and restore.
The Thumb1 target uses this to make sure R12 is not clobbered while a spilled
scavenger register is live there.
llvm-svn: 84554
stack slots and giving them different PseudoSourceValue's did not fix the
problem of post-alloc scheduling miscompiling llvm itself.
- Apply Dan's conservative workaround by assuming any non fixed stack slots can
alias other memory locations. This means a load from spill slot #1 cannot
move above a store of spill slot #2.
- Enable post-alloc scheduling for x86 at optimization leverl Default and above.
llvm-svn: 84424
to be more general and understand more varieties of loops.
Teach CodePlacementOpt to reorganize the basic blocks of a loop so that
they are contiguous. This also includes a fair amount of logic for preserving
fall-through edges while doing so. This fixes a BranchFolding-ism where blocks
which can't be made to use a fall-through edge and don't conveniently fit
anywhere nearby get tossed out to the end of the function.
llvm-svn: 84295
header is just the entry block to the loop, and it needn't be at
the top of the loop in the code layout.
Remove the code that suppressed loop alignment for outer loops,
so that outer loops are aligned.
llvm-svn: 84158
so get rid of eh.selector.i64 and rename eh.selector.i32 to eh.selector.
Likewise for eh.typeid.for. This aligns us with gcc, which always uses a
32 bit value for the selector on all platforms. My understanding is that
the register allocator used to assert if the selector intrinsic size didn't
match the pointer size, and this was the reason for introducing the two
variants. However my testing shows that this is no longer the case (I
fixed some bugs in selector lowering yesterday, and some more today in the
fastisel path; these might have caused the original problems).
llvm-svn: 84106
to remat non-load instructions as loads, and the remat code now uses
the UnmodeledSideEffects flags, MachineMemOperands, and similar things
to decide which instructions are valid for rematerialization.
llvm-svn: 84060
truncating an SDValue (depending on whether the target
type is bigger or smaller than the value's type); or zero
extending or truncating it. Use it in a few places (this
seems to be a popular operation, but I only modified cases
of it in SelectionDAGBuild). In particular, the eh_selector
lowering was doing this wrong due to a repeated rather than
inverted test, fixed with this change.
llvm-svn: 84027
bootstrap of FSF-style PPC, so there is some
reason to believe the original bug (which was
never analyzed) has been fixed, probably by
82266.
llvm-svn: 83871
into MachineInstrs. This is mostly just moving the code from
ScheduleDAGSDNodesEmit.cpp into a new class. This decouples MachineInstr
emitting from scheduling.
llvm-svn: 83699
is trivially rematerializable and integrate it into
TargetInstrInfo::isTriviallyReMaterializable. This way, all places that
need to know whether an instruction is rematerializable will get the
same answer.
This enables the useful parts of the aggressive-remat option by
default -- using AliasAnalysis to determine whether a memory location
is invariant, and removes the questionable parts -- rematting operations
with virtual register inputs that may not be live everywhere.
llvm-svn: 83687
While recording beginning of a function, use scope info from the first location entry instead of just relying on first location entry itself.
llvm-svn: 83684
to declare that they preserve other passes without needing to pull in
additional header file or library dependencies. Convert MachineFunctionPass
and CodeGenLICM to make use of this.
llvm-svn: 83555
implementations with a new MachineInstr::isInvariantLoad, which uses
MachineMemOperands and is target-independent. This brings MachineLICM
and other functionality to targets which previously lacked an
isInvariantLoad implementation.
llvm-svn: 83475
a virtual register to eliminate a frame index, it can return that register
and the constant stored there to PEI to track. When scavenging to allocate
for those registers, PEI then tracks the last-used register and value, and
if it is still available and matches the value for the next index, reuses
the existing value rather and removes the re-materialization instructions.
Fancier tracking and adjustment of scavenger allocations to keep more
values live for longer is possible, but not yet implemented and would likely
be better done via a different, less special-purpose, approach to the
problem.
eliminateFrameIndex() is modified so the target implementations can return
the registers they wish to be tracked for reuse.
ARM Thumb1 implements and utilizes the new mechanism. All other targets are
simply modified to adjust for the changed eliminateFrameIndex() prototype.
llvm-svn: 83467
verbose-asm mode, print comments instead. This eliminates a non-comment
difference between verbose-asm mode and non-verbose-asm mode.
Also, factor out the relevant code out of all the targets and into
target-independent code.
llvm-svn: 83392
spill slot. When frame references are via the frame pointer, they will be
negative, but Thumb1 load/store instructions only allow positive immediate
offsets. Instead, Thumb1 will spill to R12.
llvm-svn: 83336
the new predicates I added) instead of going through a context and doing a
pointer comparison. Besides being cheaper, this allows a smart compiler
to turn the if sequence into a switch.
llvm-svn: 83297
to emit target-specific things at the beginning of the asm output. This
fixes a problem for PPC, where the text sections are not being kept together
as expected. The base class doInitialization code calls DW->BeginModule()
which emits a bunch of DWARF section directives. The PPC doInitialization
code then emits all the TEXT section directives, with the intention that they
will be kept together. But as I understand it, the Darwin assembler treats
the default TEXT section as a special case and moves it to the beginning of
the file, which means that all those DWARF sections are in the middle of
the text. With this change, the EmitStartOfAsmFile hook is called before
the DWARF section directives are emitted, so that all the PPC text section
directives come out right at the beginning of the file.
llvm-svn: 83176
basic blocks that are so long that their size overflows a short.
Also assert that overflow does not happen in the future, as requested by Evan.
This fixes PR4401.
llvm-svn: 83159
information. This allows arbitrary code involving DW_OP_plus_uconst
and DW_OP_deref. The scheme allows for easy extention to include,
any, or all of the DW_OP_ opcodes. I thought about just exposing all
of them, but, wasn't sure if people wanted the dwarf opcodes exposed
in the api. Is that a layering violation?
With this scheme, the entire existing block scheme used by llvm-gcc
can be switched over to the new scheme. I think that would be
cleaner, as then the compiler specific bits are not present in llvm
proper. Before the old code can be yanked however, similar code in
clang would have to be removed.
Next up, more testing.
llvm-svn: 83120
physical registers. This is especially critical for the later two since they
start the live interval of a super-register. e.g.
%DO<def> = INSERT_SUBREG %D0<undef>, %S0<kill>, 1
If this instruction is eliminated, the register scavenger will not be happy as
D0 is not defined previously.
This fixes PR5055.
llvm-svn: 82968
which have no defs anywhere in the function. In particular, this fixes sinking
of instructions that reference RIP on x86-64, which is currently being modeled
as a register.
llvm-svn: 82815
- Allocate MachineMemOperands and MachineMemOperand lists in MachineFunctions.
This eliminates MachineInstr's std::list member and allows the data to be
created by isel and live for the remainder of codegen, avoiding a lot of
copying and unnecessary translation. This also shrinks MemSDNode.
- Delete MemOperandSDNode. Introduce MachineSDNode which has dedicated
fields for MachineMemOperands.
- Change MemSDNode to have a MachineMemOperand member instead of its own
fields with the same information. This introduces some redundancy, but
it's more consistent with what MachineInstr will eventually want.
- Ignore alignment when searching for redundant loads for CSE, but remember
the greatest alignment.
Target-specific code which previously used MemOperandSDNodes with generic
SDNodes now use MemIntrinsicSDNodes, with opcodes in a designated range
so that the SelectionDAG framework knows that MachineMemOperand information
is available.
llvm-svn: 82794
naming scheme used in SelectionDAG, where there are multiple kinds
of "target" nodes, but "machine" nodes are nodes which represent
a MachineInstr.
llvm-svn: 82790
allows appropriate backends to generate a sqrt instruction.
On x86, this isn't done at -O0 because we go through
FastISel instead. This is a behavior change from before
this series of sqrt patches started. I think this is OK
considering that compile speed is most important at -O0, but
could be convinced otherwise.
llvm-svn: 82778
For the AAPCS ABI, SP must always be 4-byte aligned, and at any "public
interface" it must be 8-byte aligned. For the older ARM APCS ABI, the stack
alignment is just always 4 bytes. For X86, we currently align SP at
entry to a function (e.g., to 16 bytes for Darwin), but no stack alignment
is needed at other times, such as for a leaf function.
After discussing this with Dan, I decided to go with the approach of adding
a new "TransientStackAlignment" field to TargetFrameInfo. This value
specifies the stack alignment that must be maintained even in between calls.
It defaults to 1 except for ARM, where it is 4. (Some other targets may
also want to set this if they have similar stack requirements. It's not
currently required for PPC because it sets targetHandlesStackFrameRounding
and handles the alignment in target-specific code.) The existing StackAlignment
value specifies the alignment upon entry to a function, which is how we've
been using it anyway.
llvm-svn: 82767
interest for this, as it currently reserves a register rather than using
the scavenger for matierializing constants as needed.
Instead of scavenging registers on the fly while eliminating frame indices,
new virtual registers are created, and then a scavenged collectively in a
post-pass over the function. This isolates the bits that need to interact
with the scavenger, and sets the stage for more intelligent use, and reuse,
of scavenged registers.
For the time being, this is disabled by default. Once the bugs are worked out,
the current scavenging calls in replaceFrameIndices() will be removed and
the post-pass scavenging will be the default. Until then,
-enable-frame-index-scavenging enables the new code. Currently, only the
Thumb1 back end is set up to use it.
llvm-svn: 82734
LocalAreaOffset. (We don't have any of those right now.)
PEI::calculateFrameObjectOffsets includes the absolute value of the
LocalAreaOffset in the cumulative offset value used to calculate the
stack frame size. It then adds the raw value of the LocalAreaOffset
to the stack size. For a StackGrowsDown target, that raw value is negative
and has the effect of cancelling out the absolute value that was added
earlier, but that obviously won't work for a StackGrowsUp target. Change
to subtract the absolute value of the LocalAreaOffset.
llvm-svn: 82693
LiveVariables add implicit kills to correctly track partial register kills. This works well enough and is fairly accurate. But coalescer can make it impossible to maintain these markers. e.g.
BL <ga:sss1>, %R0<kill,undef>, %S0<kill>, %R0<imp-def>, %R1<imp-def,dead>, %R2<imp-def,dead>, %R3<imp-def,dead>, %R12<imp-def,dead>, %LR<imp-def,dead>, %D0<imp-def>, ...
...
%reg1031<def> = FLDS <cp#1>, 0, 14, %reg0, Mem:LD4[ConstantPool]
...
%S0<def> = FCPYS %reg1031<kill>, 14, %reg0, %D0<imp-use,kill>
When reg1031 and S0 are coalesced, the copy (FCPYS) will be eliminated the the implicit-kill of D0 is lost. In this case it's possible to move the marker to the FLDS. But in many cases, this is not possible. Suppose
%reg1031<def> = FOO <cp#1>, %D0<imp-def>
...
%S0<def> = FCPYS %reg1031<kill>, 14, %reg0, %D0<imp-use,kill>
When FCPYS goes away, the definition of S0 is the "FOO" instruction. However, transferring the D0 implicit-kill to FOO doesn't work since it is the def of D0 itself. We need to fix this in another time by introducing a "kill" pseudo instruction to track liveness.
Disabling the assertion is not ideal, but machine verifier is doing that job now. It's important to know double-def is not a miscomputation since it means a register should be free but it's not tracked as free. It's a performance issue instead.
llvm-svn: 82677
The machine code verifier did not check for explicit operands correctly. It
used MachineInstr::getNumExplicitOperands, but that method may cheat and use
the declared count in the TargetInstrDesc.
Now we check the explicit operands one at a time in visitMachineOperand.
llvm-svn: 82652
of the defs are processed.
Also fix a implicit_def propagation bug: a implicit_def of a physical register
should be applied to uses of the sub-registers.
llvm-svn: 82616
two different places for printing MachineMemOperands.
Drop the virtual from Value::dump and instead give Value a
protected virtual hook that can be overridden by subclasses
to implement custom printing. This lets printing be more
consistent, and simplifies printing of PseudoSourceValue
values.
llvm-svn: 82599
%S0<def> = EXTRACT_SUBREG %Q0<kill>, 1
to
%S0<def> = IMPLICIT_DEF %Q0<imp-use,kill>
Implicit_def does not *read* any register so the operand should be marked "implicit". The missing "implicit" marker on the operand is wrong, but it doesn't actually break anything.
llvm-svn: 82503
variable increment / decrement slighter high priority.
This has major impact on some micro-benchmarks. On MultiSource/Applications
and spec tests, it's a minor win. It also reduce 256.bzip instruction count
by 8%, 55 on 164.gzip on i386 / Darwin.
llvm-svn: 82485
feature, either build the JIT in debug mode to enable it by default or pass
-jit-emit-debug to lli.
Right now, the only debug information that this communicates to GDB is call
frame information, since it's already being generated to support exceptions in
the JIT. Eventually, when DWARF generation isn't tied so tightly to AsmPrinter,
it will be easy to push that information to GDB through this interface.
Here's a step-by-step breakdown of how the feature works:
- The JIT generates the machine code and DWARF call frame info
(.eh_frame/.debug_frame) for a function into memory.
- The JIT copies that info into an in-memory ELF file with a symbol for the
function.
- The JIT creates a code entry pointing to the ELF buffer and adds it to a
linked list hanging off of a global descriptor at a special symbol that GDB
knows about.
- The JIT calls a function marked noinline that GDB knows about and has put an
internal breakpoint in.
- GDB catches the breakpoint and reads the global descriptor to look for new
code.
- When sees there is new code, it reads the ELF from the inferior's memory and
adds it to itself as an object file.
- The JIT continues, and the next time we stop the program, we are able to
produce a proper backtrace.
Consider running the following program through the JIT:
#include <stdio.h>
void baz(short z) {
long w = z + 1;
printf("%d, %x\n", w, *((int*)NULL)); // SEGFAULT here
}
void bar(short y) {
int z = y + 1;
baz(z);
}
void foo(char x) {
short y = x + 1;
bar(y);
}
int main(int argc, char** argv) {
char x = 1;
foo(x);
}
Here is a backtrace before this patch:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x2aaaabdfbd10 (LWP 25476)]
0x00002aaaabe7d1a8 in ?? ()
(gdb) bt
#0 0x00002aaaabe7d1a8 in ?? ()
#1 0x0000000000000003 in ?? ()
#2 0x0000000000000004 in ?? ()
#3 0x00032aaaabe7cfd0 in ?? ()
#4 0x00002aaaabe7d12c in ?? ()
#5 0x00022aaa00000003 in ?? ()
#6 0x00002aaaabe7d0aa in ?? ()
#7 0x01000002abe7cff0 in ?? ()
#8 0x00002aaaabe7d02c in ?? ()
#9 0x0100000000000001 in ?? ()
#10 0x00000000014388e0 in ?? ()
#11 0x00007fff00000001 in ?? ()
#12 0x0000000000b870a2 in llvm::JIT::runFunction (this=0x1405b70,
F=0x14024e0, ArgValues=@0x7fffffffe050)
at /home/rnk/llvm-gdb/lib/ExecutionEngine/JIT/JIT.cpp:395
#13 0x0000000000baa4c5 in llvm::ExecutionEngine::runFunctionAsMain
(this=0x1405b70, Fn=0x14024e0, argv=@0x13f06f8, envp=0x7fffffffe3b0)
at /home/rnk/llvm-gdb/lib/ExecutionEngine/ExecutionEngine.cpp:377
#14 0x00000000007ebd52 in main (argc=2, argv=0x7fffffffe398,
envp=0x7fffffffe3b0) at /home/rnk/llvm-gdb/tools/lli/lli.cpp:208
And a backtrace after this patch:
Program received signal SIGSEGV, Segmentation fault.
0x00002aaaabe7d1a8 in baz ()
(gdb) bt
#0 0x00002aaaabe7d1a8 in baz ()
#1 0x00002aaaabe7d12c in bar ()
#2 0x00002aaaabe7d0aa in foo ()
#3 0x00002aaaabe7d02c in main ()
#4 0x0000000000b870a2 in llvm::JIT::runFunction (this=0x1405b70,
F=0x14024e0, ArgValues=...)
at /home/rnk/llvm-gdb/lib/ExecutionEngine/JIT/JIT.cpp:395
#5 0x0000000000baa4c5 in llvm::ExecutionEngine::runFunctionAsMain
(this=0x1405b70, Fn=0x14024e0, argv=..., envp=0x7fffffffe3c0)
at /home/rnk/llvm-gdb/lib/ExecutionEngine/ExecutionEngine.cpp:377
#6 0x00000000007ebd52 in main (argc=2, argv=0x7fffffffe3a8,
envp=0x7fffffffe3c0) at /home/rnk/llvm-gdb/tools/lli/lli.cpp:208
llvm-svn: 82418
U lib/CodeGen/AsmPrinter/DwarfException.cpp
U lib/CodeGen/AsmPrinter/DwarfException.h
--- Reverse-merging r82274 into '.':
U lib/Target/TargetLoweringObjectFile.cpp
G lib/CodeGen/AsmPrinter/DwarfException.cpp
These revisions were breaking everything.
llvm-svn: 82396
internal, they shouldn't use the indirect pointer stuff. In the case of
throw_rethrow_test, it was marked as 'internal' and calculated its own offset to
its contents.
llvm-svn: 82354
we pushed the beginning of the interval back 1, so the
interval would overlap with inputs that die. We were
also pushing the end of the interval back 1, though,
which means the earlyclobber didn't overlap with other
output operands. Don't do this. PR 4964.
llvm-svn: 82342
into the __DATA section. At launch time, dyld has to update most of the section
to fix up the type info pointers. It's better to place it into the __TEXT
section and use pc-rel indirect pointer encodings. Similar to the personality
routine.
llvm-svn: 82274
This can be seen on CodeGen/Generic/2006-09-06-SwitchLowering.ll. But it's not known to cause any real regression (but I have added an assertion for it now).
llvm-svn: 82214
constants out of loops. These aren't covered by the regular LICM
pass, because in LLVM IR constants don't require separate
instructions. They're not always covered by the MachineLICM pass
either, because it doesn't know how to unfold folded constant-pool
loads. This is somewhat experimental at this point, and off by
default.
llvm-svn: 82076
Eliminate the PersonalityPrefix/Suffix & NeedsIndirectEncoding
fields from MAI: they aren't part of the asm syntax, they are
related to the structure of the object file.
To replace their functionality, add a new
TLOF::getSymbolForDwarfGlobalReference method which asks targets
to decide how to reference a global from EH in a pc-relative way.
The default implementation just returns the symbol. The default
darwin implementation references the symbol through an indirect
$non_lazy_ptr stub. The bizarro x86-64 darwin specialization
handles the weird "foo@GOTPCREL+4" hack.
DwarfException.cpp now uses this to emit the reference to the
symbol in the right way, and this also eliminates another
horrible hack from DwarfException.cpp:
- if (strcmp(MAI->getPersonalitySuffix(), "+4@GOTPCREL"))
- O << "-" << MAI->getPCSymbol();
llvm-svn: 81991
one implementation into its one caller. This eliminates a totally
awesome and gratuitous hack where we casted a Function* to
GlobalVariable*.
llvm-svn: 81967
1. Switch from an std::set to a SmallPtrSet for visited chain nodes.
2. Do not force the recursive flattening of token factor nodes, regardless of
use count.
3. Immediately process newly created TokenFactor nodes.
Also, improve combiner-aa by teaching it that loads to non-overlapping offsets
of relatively aligned objects cannot alias.
These changes result in a >5x speedup for combiner-aa on most testcases.
llvm-svn: 81816
The gist of this is if source of some of the copies that feed into a phi join is defined by the phi join, we'd like to eliminate them. However, if any of the non-identity source overlaps the live interval of the phi join then the coalescer won't be able to coalesce them. The early coalescer's job is to eliminate the identity copies by partially-coalescing the two live intervals.
llvm-svn: 81796
full AsmPrinter, and change TargetRegistry to keep track
of registered MCInstPrinters.
llvm-mc is still linking in the entire
target foo to get the code emitter stuff, but this is an
important step in the right direction.
llvm-svn: 81754
Move GetMBBSymbol up to AsmPrinter and make printBasicBlockLabel use it so that
we only have one place that decides what to name bb labels. Hopefully various
clients of printBasicBlockLabel can start using GetMBBSymbol instead.
llvm-svn: 81652
object, the timer it creates was not being deleted. Since the
timer belonged to a static timer group, the timer group would
be destroyed on shutdown, and would notice and complain that
not all timers it contained were destroyed.
llvm-svn: 81533
from the exception tables. However, Duncan explained why it's a can of worms to
do it the GCC way. I went back to doing it the LLVM way and added Duncan's
explanation so that I don't do this again in the future.
llvm-svn: 81434
like what GCC outputs. The mysterious code to insert padding wasn't in GCC at
all. I modified the TType base offset code to calculate the offset like GCC
does, though.
llvm-svn: 81424
code within it was the same inside and out. There's still a problem of the
TypeInfoSize should be the size of the TType format encoding (at least that's
what GCC thinks it should be).
llvm-svn: 81417
Basically, this patch is working towards removing the hard-coded values that are
output for the CIE. In particular, the CIE augmentation and the CIE augmentation
size. Both of these should be calculated. In the process, I was able to make a
bunch of code simpler.
The encodings for the personality, LSDA, and FDE in the CIE are still not
correct. They should be generated either from target-specific callbacks (blech!)
or grokked from first-principles.
llvm-svn: 81404
the MCInst path of the asmprinter. Instead, pull comment printing
out of the autogenerated asmprinter into each target that uses the
autogenerated asmprinter. This causes code duplication into each
target, but in a way that will be easier to clean up later when more
asmprinter stuff is commonized into the base AsmPrinter class.
This also fixes an xcore strangeness where it inserted two tabs
before every instruction.
llvm-svn: 81396
to instructions instead of zero extended ones. This makes the asmprinter
print signed values more consistently. This apparently only really affects
the X86 backend.
llvm-svn: 81265
instruction to insert before can be end(). getDebugLoc on
end() returns an invalid value, therefore use the debug
loc of the call instruction, and give it to InsertLabel.
llvm-svn: 81207
from floating-point to integer first, and bitcast the result
back to floating-point. Previously, this test was passing by
falling back to SelectionDAG lowering. The resulting code isn't
as nice, but it's correct and CodeGen now stays on the fast path.
llvm-svn: 81171
a new class, MachineInstrIndex, which hides arithmetic details from
most clients. This is a step towards allowing the register allocator
to update/insert code during allocation.
llvm-svn: 81040
for the complicated case where one register is tied to multiple destinations.
This avoids the extra scan of instruction operands that was introduced by
my recent change. I also pulled some code out into a separate
TryInstructionTransform method, added more comments, and renamed some
variables.
Besides all those changes, this takes care of a FIXME in the code regarding
an assumption about there being a single tied use of a register when
converting to a 3-address form. I'm not aware of cases where that assumption
is violated, but the code now only attempts to transform an instruction,
either by commuting its operands or by converting to a 3-address form,
for the simple case where there is a single pair of tied operands.
llvm-svn: 80945
avoid reloads by reusing clobbered registers.
This was causing issues in 256.bzip2 when compiled with PIC for
a while (starting at r78217), though the problem has since been masked.
llvm-svn: 80872
tied to different source registers, the TwoAddressInstructionPass needs to
be smarter. Change it to check before replacing a source register whether
that source register is tied to a different destination register, and if so,
defer handling it until a subsequent iteration.
llvm-svn: 80654
makes an eggregious hack somewhat more palatable. Bringing the LSDA forward
and making it a GV available for reference would be even better, but is
beyond the scope of what I'm looking to solve at this point.
Objective C++ code could generate function names that broke the previous
scheme. This fixes that.
llvm-svn: 80649
Shared landing pads run into trouble with SJLJ, as the dispatch table is
mapped to call sites, and merging the pads will throw that off. There needs
to be a one-to-one mapping of landing pad exception table entries to invoke
call points.
Detecting the shared pad during lowering of SJLJ info insn't sufficient, as
the dispatch function may still need separate destinations to properly
handle phi-nodes.
llvm-svn: 80530
encodings.
- Make some of the values emitted by the FDEs dependent upon the pointer
size. This is in line with how GCC does things. And it has the benefit of
working for Darwin in 64-bit mode now.
llvm-svn: 80428
A include/llvm/ADT/iterator.cmake
U autoconf/configure.ac
--- Reverse-merging r80161 into '.':
U cmake/config-ix.cmake
--- Reverse-merging r80171 into '.':
U Makefile
--- Reverse-merging r80173 into '.':
U configure
U include/llvm/Config/config.h.in
--- Reverse-merging r80180 into '.':
A include/llvm/ADT/iterator.h.in
Despite common miscomceptions, iterator.h is alive and well. It broke the build
bots for several hours. And yet no one bothered to look at them.
Gabor and Doug, please review your changes and make sure that they actually
build before resubmitting them.
llvm-svn: 80197
forcing them down into various .cpp files.
This change also:
1. Renames TimeValue::toString() and Path::toString() to ::str()
for similarity with the STL.
2. Removes all stream insertion support for sys::Path, forcing
clients to call .str().
3. Removes a use of Config/alloca.h from bugpoint, using smallvector
instead.
4. Weans llvm-db off <iostream>
sys::Path really needs to be gutted, but I don't have the desire to
do it at this point.
llvm-svn: 79869
When undoing a reuse in ReuseInfo::GetRegForReload, check if it was only a
sub-register being used. The MachineOperand::getSubReg() method is only valid
for virtual registers, so we have to recover the sub-register index manually.
llvm-svn: 79855
MachineInstr and MachineOperand. This required eliminating a
bunch of stuff that was using DOUT, I hope that bill doesn't
mind me stealing his fun. ;-)
llvm-svn: 79813
instead of as two bools. Use this to add a F_Append flag
which has the obvious behavior.
Other unrelated changes conflated into this patch:
1. REmove EH stuff from llvm-dis and llvm-as, the try blocks
are dead.
2. Simplify the filename inference code in llvm-as/llvm-dis,
because raw_fd_ostream does the right thing with '-'.
3. Switch machine verifier to use raw_ostream instead of ostream
(Which is the thing that needed append in the first place).
llvm-svn: 79807
be of (dynamically) constant values, so races on it are immaterial. We just need
to ensure that at least one write has completed before return the pointer into it.
With this change, parllc exhibits essentially no overhead on 403.gcc.
llvm-svn: 79708
- Drop the Candidates argument and fix all callers. Now that RegScavenger
tracks available registers accurately, there is no need to restict the
search.
- Make sure that no aliases of the found register are in use. This was a potential bug.
llvm-svn: 79369
remove RemoveDuplicateSuccessor, as it is no longer necessary, and because
it breaks assumptions made in
MachineBasicBlock::isOnlyReachableByFallthrough.
Convert test/CodeGen/X86/omit-label.ll to FileCheck and add a testcase
for PR4732.
test/CodeGen/Thumb2/thumb2-ifcvt2.ll sees a diff with this commit due to
it being bugpoint-reduced to the point where it doesn't matter what the
condition for the branch is.
Add some more interesting code to
test/CodeGen/X86/2009-08-06-branchfolder-crash.ll, which is the testcase
that originally motivated the RemoveDuplicateSuccessor code, to help
verify that the original problem isn't being re-broken.
llvm-svn: 79338
MCAsmStreamer. Based on this, eliminate the current section from AsmPrinter.
While I'm at it, clean up the last of the horrible "switch to null section" stuff
and add an assert. This change is in preparation for completely eliminating
asmprinter::switchtosection.
llvm-svn: 79324
more properly belong. This allows removing the front-end conditionalized
SJLJ code, and cleans up the generated IR considerably. All of the
infrastructure code (calling _Unwind_SjLj_Register/Unregister, etc) is
added by the SjLjEHPrepare pass.
llvm-svn: 79250
doing it directly. This requires const'izing a bunch of stuff that
took sections, but this seems like the right semantic thing to do:
emitting a label to a section shouldn't mutate the MCSection object
itself, for example.
llvm-svn: 79227
If two uses of a CopyFromReg want different regclasses, first try a common
sub-class, then fall back on the copy emitted in AddRegisterOperand. There is
no need for an assert here. The cross-class joiner usually cleans up nicely.
llvm-svn: 79193
It is legal for an inline asm operand to use an earlyclobber register if the
use operand is tied to the earlyclobber operand. The issue is discussed here:
http://gcc.gnu.org/ml/gcc/1999-04n/msg00431.html
We should perhaps let only the machine code verifier worry about these finer
details. EarlyClobber operands are not really interesting to the scavenger.
This fixes PR4528 for the third time.
llvm-svn: 79122
In a naked function, the flag is never set and getPristineRegs() returns an
empty list. That means naked functions are able to clobber callee saved
registers, but that is the whole point of naked functions.
This fixes PR4716.
llvm-svn: 79096
In the included test case, a stack load was not included in DistanceMap. That
caused TransferDeadness to ignore the instruction, leading to a scavenger
assert.
llvm-svn: 79090
libcall. Take advantage of this in the ARM backend to rectify broken
choice of CC when hard float is in effect. PIC16 may want to see if
it could be of use in MakePIC16Libcall, which works unchanged.
Patch by Sandeep!
llvm-svn: 79033
TargetAsmInfo. This eliminates a dependency on TargetMachine.h from
TargetRegistry.h, which technically was a layering violation.
- Clients probably can only sensibly pass in the same TargetAsmInfo as the
TargetMachine has, but there are only limited clients of this API.
llvm-svn: 78928
pair instead of from a virtual method on TargetMachine. This cuts the final
ties of TargetAsmInfo to TargetMachine, meaning that MC can now use
TargetAsmInfo.
llvm-svn: 78802
"inlineasmstart/end" strings so that the contents of the directive
are separate from the comment character. This lets elf targets
get #APP/#NOAPP for free even if they don't use "#" as the comment
character. This also allows hoisting the darwin stuff up to the
shared TAI class.
llvm-svn: 78737
The register scavenger maintains a DistanceMap that maps MI pointers to their
distance from the top of the current MBB. The DistanceMap is built
incrementally in forward() and in bulk in findFirstUse(). It is used by
scavengeRegister() to determine which candidate register has the longest
unused interval.
Unfortunately the DistanceMap contents can become outdated. The first time
scavengeRegister() is called, the DistanceMap is filled to cover the MBB. If
then instructions are inserted in the MBB (as they always are following
scavengeRegister()), the recorded distances are too short. This causes bad
behaviour in the included test case where a register use /after/ the current
position is ignored because findFirstUse() thinks is is /before/ the current
position. A "using an undefined register" assertion follows promptly.
The fix is to build a fresh DistanceMap at the top of scavengeRegister(), and
discard it after use. This means that DistanceMap is no longer needed as a
RegScavenger member variable, and forward() doesn't need to update it.
The fix then discloses issue number two in the same test case: The candidate
search in scavengeRegister() finds a CSR that has been saved in the prologue,
but is currently unused. It would be both inefficient and wrong to spill such
a register in the emergency spill slot. In the present case, the emergency
slot restore is placed immediately before the normal epilogue restore, leading
to a "Redefining a live register" assertion.
Fix number two: When scavengerRegister() stumbles upon an unused register that
is overwritten later in the MBB, return that register early. It is important
to verify that the register is defined later in the MBB, otherwise it might be
an unspilled CSR.
llvm-svn: 78650
and short. Well, it's kinda short. Definitely nasty and brutish.
The front-end generates the register/unregister calls into the SjLj runtime,
call-site indices and landing pad dispatch. The back end fills in the LSDA
with the call-site information provided by the front end. Catch blocks are
not yet implemented.
Built on Darwin and verified no llvm-core "make check" regressions.
llvm-svn: 78625
MERGE_VALUES nodes. Replacing the result values with the
operands in one MERGE_VALUES node may cause another
MERGE_VALUES node be CSE'd with the first one, and bring
its uses along, so that the first one isn't dead, as this
code expects. Fix this by iterating until the node is
really dead. This fixes PR4699.
llvm-svn: 78619
This definitely slows down asm output so put it under an -asm-exuberant
flag.
This information is useful when doing static analysis of performance
issues.
llvm-svn: 78567
Evan Cheng