This is already deprecated, so remove code working on this.
Also update the tests by using S_CBRANCH_EXECZ instead of SI_MASK_BRANCH.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D97545
Move implementation of kill intrinsics to WQM pass. Add live lane
tracking by updating a stored exec mask when lanes are killed.
Use live lane tracking to enable early termination of shader
at any point in control flow.
Reviewed By: piotr
Differential Revision: https://reviews.llvm.org/D94746
Add pseudo instruction to allow early termination of pixel shader
anywhere based on the value of SCC. The intention is to use this
when a mask of live lanes is updated, e.g. live lanes in WQM pass.
This facilitates early termination of shaders even when EXEC is
incomplete, e.g. in non-uniform control flow.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D88777
Refactor exit block creation to a single call ensureEarlyExitBlock.
Add support for generating an early exit block which clears the
exec mask, but only add this instruction when required.
These changes are to facilitate adding more forms of early
termination for PS shaders in the near future.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D88775
Convert to use new MachineBasicBlock splitAt function.
Place code in splitBlock function for reuse in future changes.
Should yield no functional change.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D88537
Exit early if the exec mask is zero at the end of control flow.
Mark the ends of control flow during control flow lowering and
convert these to exits during the insert skips pass.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D82737
Exit early if the exec mask is zero at the end of control flow.
Mark the ends of control flow during control flow lowering and
convert these to exits during the insert skips pass.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D82737
Generate a single early exit block out-of-line and branch to this
if all lanes are killed. This avoids branching if lanes are active.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D82641
For now, moving it to SIPreEmitPeephole.
Should find a right place to have this code.
Reviewed By: nhaehnle
Differential revision: https://reviews.llvm.org/D77544
This pass can handle all the optimization
opportunities found just before code emission.
Presently it includes the handling of vcc branch
optimization that was handled earlier in SIInsertSkips.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D76712
Summary:
The old code made some incorrect assumptions about the order in which
basic blocks are laid out in a function. This could lead to incorrect
early-exits, especially when kills occurred inside of loops.
The new approach is to check whether the point where the conditional
kill occurs dominates all reachable code. If that is the case, there
cannot be any other threads in the wave that are waiting to rejoin
at a later point in the CFG, i.e. if exec=0 at that point, then all
threads really are dead and we can exit the wave.
Make some other minor cleanups to the pass while we're at it.
v2: preserve the dominator tree
Reviewers: arsenm, cdevadas, foad, critson
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74908
Change-Id: Ia0d2b113ac944ad642d1c622b6da1b20aa1aabcc
The current implementation of skip insertion (SIInsertSkip) makes it a
mandatory pass required for correctness. Initially, the idea was to
have an optional pass. This patch inserts the s_cbranch_execz upfront
during SILowerControlFlow to skip over the sections of code when no
lanes are active. Later, SIRemoveShortExecBranches removes the skips
for short branches, unless there is a sideeffect and the skip branch is
really necessary.
This new pass will replace the handling of skip insertion in the
existing SIInsertSkip Pass.
Differential revision: https://reviews.llvm.org/D68092
The current implementation of skip insertion (SIInsertSkip) makes it a
mandatory pass required for correctness. Initially, the idea was to
have an optional pass. This patch inserts the s_cbranch_execz upfront
during SILowerControlFlow to skip over the sections of code when no
lanes are active. Later, SIRemoveShortExecBranches removes the skips
for short branches, unless there is a sideeffect and the skip branch is
really necessary.
This new pass will replace the handling of skip insertion in the
existing SIInsertSkip Pass.
Differential revision: https://reviews.llvm.org/D68092
SIInsertSkips really doesn't understand the control flow, and makes
very stupid assumptions about the block layout. This was able to get
away with not skipping return blocks, since usually after
structurization there is only one placed at the end of the
function. Tail duplication can break this assumption.
llvm-svn: 362754
Summary: This fixes a large Dawn of War 3 performance regression with RADV from Mesa 19.0 to master which was caused by creating less code in some branches.
Reviewers: arsen, nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60824
llvm-svn: 358592
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
If a block had one of the _term instructions used for gluing
exec modifying instructions to the end of the block,
analyzeBranch would fail, preventing the verifier from catching
a broken successor list.
llvm-svn: 347027
Sometimes after basic block placement we end up with a code like:
sreg = s_mov_b64 -1
vcc = s_and_b64 exec, sreg
s_cbranch_vccz
This happens as a join of a block assigning -1 to a saved mask and
another block which consumes that saved mask with s_and_b64 and a
branch.
This is essentially a single s_cbranch_execz instruction when moved
into a single new basic block.
Differential Revision: https://reviews.llvm.org/D54164
llvm-svn: 346690
Summary:
These instructions interact with hardware blocks outside the shader core,
and they can have "scalar" side effects even when EXEC = 0. We don't
want these scalar side effects to occur when all lanes want to skip
these instructions, so always add the execz skip branch instruction
for basic blocks that contain them.
Also ensure that we skip scalar stores / atomics, though we don't
code-gen those yet.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48431
Change-Id: Ieaeb58352e2789ffd64745603c14970c60819d44
llvm-svn: 338235
Summary:
This is a follow-up to r335942.
- Merge SISubtarget into AMDGPUSubtarget and rename to GCNSubtarget
- Rename AMDGPUCommonSubtarget to AMDGPUSubtarget
- Merge R600Subtarget::Generation and GCNSubtarget::Generation into
AMDGPUSubtarget::Generation.
Reviewers: arsenm, jvesely
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D49037
llvm-svn: 336851
Summary:
MCTargetDesc/AMDGPUMCTargetDesc.h contains enums for all the instuction
and register defintions, which are huge so we only want to include
them where needed.
This will also make it easier if we want to split the R600 and GCN
definitions into separate tablegenerated files.
I was unable to remove AMDGPUMCTargetDesc.h from SIMachineFunctionInfo.h
because it uses some enums from the header to initialize default values
for the SIMachineFunction class, so I ended up having to remove includes of
SIMachineFunctionInfo.h from headers too.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: MatzeB, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46272
llvm-svn: 332930
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Mark more opcodes as hasExtraSrcRegAllocReq so that their operands will
be marked as not renamable, to avoid copy forwarding violating the
constraint that only one operand may use the constant bus.
These changes fix a few mis-compiles when copy forwarding is enabled in
MachineCopyPropagation by D41835 (and were reviewed as part of that change).
llvm-svn: 323794
Patch by: Bas Nieuwenhuizen
Just use the _e64 variant if needed. This should be possible as per
def : Pat <
(int_amdgcn_kill (i1 (setcc f32:$src, InlineFPImm<f32>:$imm, cond:$cond))),
(SI_KILL_F32_COND_IMM_PSEUDO $src, (bitcast_fpimm_to_i32 $imm), (cond_as_i32imm $cond))
> ;
I don't think we can get an immediate for the other operand for which we
need the second 32-bit word.
https://reviews.llvm.org/D42302
llvm-svn: 323706
Summary:
Kill the thread if operand 0 == false.
llvm.amdgcn.wqm.vote can be applied to the operand.
Also allow kill in all shader stages.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D38544
llvm-svn: 316427
This is used for a specific type of return to a shader part's
epilog code. Rename to try avoiding confusion from a true
call's return.
llvm-svn: 298452
The sequence like this:
v_cmpx_le_f32_e32 vcc, 0, v0
s_branch BB0_30
s_cbranch_execnz BB0_30
; BB#29:
exp null off, off, off, off done vm
s_endpgm
BB0_30:
; %endif110
is likely wrong. The s_branch instruction will unconditionally jump
to BB0_30 and the skip block (exp done + endpgm) inserted for
performing the kill instruction will never be executed. This results
in a GPU hang with Star Ruler 2.
The s_branch instruction is added during the "Control Flow Optimizer"
pass which seems to re-organize the basic blocks, and we assume
that SI_KILL_TERMINATOR is always the last instruction inside a
basic block. Thus, after inserting a skip block we just go to the
next BB without looking at the subsequent instructions after the
kill, and the s_branch op is never removed.
Instead, we should remove the unconditional out branches and let
skip the two instructions if the exec mask is non-zero.
This patch fixes the GPU hang and doesn't introduce any regressions
with "make check".
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99019
Patch by Samuel Pitoiset <samuel.pitoiset@gmail.com>
llvm-svn: 292985
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Structure the definitions a bit more like the other classes.
The main change here is to split EXP with the done bit set
to a separate opcode, so we can set mayLoad = 1 so that it won't
be reordered before the other exp stores, since this has the special
constraint that if the done bit is set then this should be the last
exp in she shader.
Previously all exp instructions were inferred to have unmodeled
side effects.
llvm-svn: 288695
Ruiling Song