This patch adds support for masked scatter intrinsics on scalable vector
types. It is mostly an extension of the earlier masked gather support
introduced in D96263, since the addressing mode legalization is the
same.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96486
This patch supports the masked gather intrinsics in RVV.
The RVV indexed load/store instructions only support the "unsigned unscaled"
addressing mode; indices are implicitly zero-extended or truncated to XLEN and
are treated as byte offsets. This ISA supports the intrinsics directly, but not
the majority of various forms of the MGATHER SDNode that LLVM combines to. Any
signed or scaled indexing is extended to the XLEN value type and scaled
accordingly. This is done during DAG combining as widening the index types to
XLEN may produce illegal vectors that require splitting, e.g.
nxv16i8->nxv16i64.
Support for scalable-vector CONCAT_VECTORS was added to avoid spilling via the
stack when lowering split legalized index operands.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96263
Without this patch, bitcasts of fixed-length mask vectors would go
through the stack.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98779
This patch changes the operand order of masked vmslt[u]
from (mask, rs1, scalar, maskedoff, vl)
to (maskedoff, rs1, scalar, mask, vl).
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98839
This patch adds an optimization path for BUILD_VECTOR nodes where the
majority of the elements are identical. These can be splatted, with the
remaining elements patched up with INSERT_VECTOR_ELTs. The threshold can
be tweaked as required - it is currently conservative. Undef elements
are disregarded when judging the dominance of a particular element. This
allows them to be covered by the splat value.
In addition, vectors of 2 elements are always optimized to a splat (for
the upper element) and an insert at element zero.
This optimization is disabled when optimizing for size.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98700
The InstrEmitter can sometimes insert a copy after an IMPLICIT_DEF
before connecting it to the vector instruction. This occurs when
constrainRegClass reduces to a class with less than 4 registers.
I believe LMUL8 on masked instructions triggers this since the
result can only use the v8, v16, or v24 register group as the mask
is using v0.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98567
The default promotion uses zero extends that become shifts. We
cam use sign extend instead which is better for RISCV.
I've used two different implementations based on whether we
have minu/maxu instructions.
Differential Revision: https://reviews.llvm.org/D98683
This allows me to introduce similar combines for branches as
we have recently added for SELECT_CC. Some of them are less
useful for standalone setccs and only help branch instructions.
By having a BR_CC node its easier to only affect branches.
I'm using CondCodeSDNode to make isel patterns easier to
write so we can refer to the codes by name. SELECT_CC uses a
constant instead.
I've translated the condition code just like SELECT_CC so
we need less patterns for the swapped conditions. This
includes special cases for X < 1 and X > -1 that get translated
to blez and bgez by using a 0 constant.
computeKnownBitsForTargetNode support for SELECT_CC is added
to allow MaskedValueIsZero to work for cases where the true
and false values of the SELECT_CC are setccs and the
result of the SELECT_CC is used by a BR_CC. This was needed
to avoid regressions in some of the overflow tests.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98159
The following code-sequence showed up in a testcase (isolated from
SPEC2017) for if-conversion and vectorization when searching for the
maximum in an array:
addi a2, zero, 1
blt a1, a2, .LBB0_5
which can be expressed as `bge zero,a1,.LBB0_5`/`blez a1,/LBB0_5`.
More generally, we want to express (a < 1) as (a <= 0).
This adds the required isel-pattern and updates the testcases.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98449
The default legalization uses zero extends that require pair of shifts
on RISCV. Instead we can take advantage of the fact that unsigned
compares work equally well on sign extended inputs. This allows
us to use addw/subw and sext.w.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98233
This patch adds fixed-length vector support to the calling convention
when RVV is used to lower fixed-length vectors. The scheme follows the
regular vector calling convention for the argument/return registers, but
uses scalable vector container types as the LocVTs, and converts to/from
the fixed-length vector value types as required.
Fixed-length vector types may be split when the combination of minimum
VLEN and the maximum allowable LMUL is not large enough to fully contain
the vector. In this case the behaviour differs between fixed-length
vectors passed as parameters and as return values:
1. For return values, vectors must be passed entirely via registers or
via the stack.
2. For parameters, unlike scalar values, split vectors continue to be
passed by value, and are split across multiple registers until there are
no remaining registers. Thus vector parameters may be found partly in
registers and partly on the stack.
As with scalable vectors, the first fixed-length mask vector is passed
via v0. Split mask fixed-length vectors are passed first via v0 and then
via the next available vector register: v8,v9,etc.
The handling of vector return values uses all available argument
registers v8-v23 which does not adhere to the calling convention we're
supposedly implementing, but since this issue affects both fixed-length
and scalable-vector values, it was left as-is.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97954
Types of fractional LMUL and LMUL=1 are all using VR register class. When
using inline asm, it will use the first type in the register class as the
type for the register. It is not necessary the same as the value type. We
need to use INSERT_SUBVECTOR/EXTRACT_SUBVECToR/BITCAST to make it legal
to put the value in the corresponding register class.
Differential Revision: https://reviews.llvm.org/D97480
I encountered a project that uses llvm that passes "generic" by
default. While I could fix that project, I wouldn't be surprised
if other projects did something similar. So it seems like
a good idea to provide a better error here.
I've also added validation of the 64Bit feature against the
triple so that we can catch a mismatched CPU before failing in
a mysterious way. We can make it pretty far in isel because we
calculate XLenVT from the triple and use that to set up the legal
integer type.
Reviewed By: luismarques, khchen
Differential Revision: https://reviews.llvm.org/D98307
This patch change the rvv frame layout that proposed in D94465. In patch D94465, In the eliminateFrameIndex function,
to eliminate the rvv frame index, create temp virtual register is needed. This virtual register should be scavenged by class
RegsiterScavenger. If the machine function has other unused registers, there is no problem. But if there isn't unused registers,
we need a emergency spill slot. Because of the emergency spill slot belongs to the scalar local variables field, to access emergency
spill slot, we need a temp virtual register again. This makes the compiler report the "Incomplete scavenging after 2nd pass" error.
So I change the rvv frame layout as follows:
```
|--------------------------------------|
| arguments passed on the stack |
|--------------------------------------|<--- fp
| callee saved registers |
|--------------------------------------|
| rvv vector objects(local variables |
| and outgoing arguments |
|--------------------------------------|
| realignment field |
|--------------------------------------|
| scalar local variable(also contains|
| emergency spill slot) |
|--------------------------------------|<--- bp
| variable-sized local variables |
|--------------------------------------|<--- sp
```
Differential Revision: https://reviews.llvm.org/D97111
This patch optimizes the codegen for INSERT_VECTOR_ELT in various ways.
Primarily, it removes the use of vslidedown during lowering, and the
vector element is inserted entirely using vslideup with a custom VL and
slide index.
Additionally, lowering of i64-element vectors on RV32 has been optimized
in several ways. When the 64-bit value to insert is the same as the
sign-extension of the lower 32-bits, the codegen can follow the regular
path. When this is not possible, a new sequence of two i32 vslide1up
instructions is used to get the vector element into a vector. This
sequence was suggested by @craig.topper. From there, the value is slid
into the final position for more consistent lowering across RV32 and
RV64.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98250
We don't support any other shuffles currently.
This changes the bswap/bitreverse tests that check for this in
their expansion code. Previously we expanded a byte swapping
shuffle through memory. Now we're scalarizing and doing bit
operations on scalars to swap bytes.
In the future we can probably use vrgather.vx to do a byte swap
shuffle.
This uses a really simple approach of converting to an i8 vector
and extracting. This is probably not the best approach especially
if you know the index is constant.
Other ideas:
-Store to stack temporary using vse1, load as scalar and shift.
-Sort of bitcast the vector to a vector of i8, slide down the
appropriate 8 bit element, copy to scalar, shift down the
correct bit within the 8 bits we extracted. Not exactly sure
how to describe such a bitcast from i1 vector to i8 vector
within the type system for elements less than 8.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98310
On riscv32, i64 isn't a legal scalar type but we would like to
support scalable vectors of i64.
This patch introduces a new node that can represent a splat made
of multiple scalar values. I've used this new node to solve the current
crashes we experience when getConstant is used after type legalization.
For RISCV, we are now default expanding SPLAT_VECTOR to SPLAT_VECTOR_PARTS
when needed and then handling the SPLAT_VECTOR_PARTS later during
LegalizeOps. I've remove the special case I previously put in for
ABS for D97991 as the default expansion is now able to succesfully
use getConstant.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98004
Currently we crash in type legalization any time an intrinsic
uses a scalar i64 on RV32.
This patch adds support for type legalizing this to prevent
crashing. I don't promise that it uses the best possible codegen
just that it is functional.
This first version handles 3 cases. vmv.v.x intrinsic, vmv.s.x
intrinsic and intrinsics that take a scalar input, splat it and
then do some operation.
For vmv.v.x we'll either rely on hardware sign extension for
constants or we'll convert it to multiple splats and bit
manipulation.
For vmv.s.x we use a really unoptimal sequence inspired by what
we do for an INSERT_VECTOR_ELT.
For the third case we'll either try to use the .vi form for
constants or convert to a complicated splat and bitmanip and use
the .vv form of the operation.
I've renamed the ExtendOperand field to SplatOperand now use it
specifically for the third case. The first two cases are handled
by custom lowering specifically for those intrinsics.
I haven't updated all tests yet, but I tried to cover a subset
that includes single-width, widening, and narrowing.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97895
The type legalizer will visit the result before the operands. To
avoid creating an illegal target specific node or falling back to
scalarization, we need to manually split vector operands.
This still doesn't handle the case of non-power of 2 operands
which need to be widened. I'm not sure the type legalizer is
ready for it. I think we would need to insert an
INSERT_SUBVECTOR with the power of 2 type we want, with an undef
first operand, and the non-power of 2 orignal operand as the vector
to insert. Then fill in the neutral elements into the elements the
padded elements. Alternatively we INSERT_SUBVECTOR into a neutral vector.
From there we carry on splitting if needed to get to a legal type
then do the target specific code.
The problem with this is the type legalizer doesn't know how to
widen an insert_subvector yet. We would need to add that including
the handling for a non-undef first vector.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98292
I've left mask registers to a future patch as we'll need
to convert them to full vectors, shuffle, and then truncate.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97609
I've included tests that require type legalization to split the
vector. The i64 version of these scalarizes on RV32 due to type
legalization visiting the result before the vector type. So we
have to abort our custom expansion to avoid creating target
specific nodes with an illegal type. Then type legalization ends
up scalarizing. We might be able to fix this by doing custom
splitting for large vectors in our handler to get down to a legal
type.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98102
Previously we set the value to -1, but the SEW information could
be useful for scheduling.
Reviewed By: frasercrmck, rogfer01
Differential Revision: https://reviews.llvm.org/D98062
The default fixed vector expansion uses sra+xor+add since it can't
see that smax is legal due to our custom handling. So we select
smax(X, sub(0, X)) manually.
Scalable vectors are able to use the smax expansion automatically
for most cases. It crashes in one case because getConstant can't build a
SPLAT_VECTOR for nxvXi64 when i64 scalars aren't legal. So
we manually emit a SPLAT_VECTOR_I64 for that case.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97991
As far as I know we're not enforcing the StdExtM must be enabled
to use the V extension. If we use an assert here and hit this
code in a release build we'll silently emit an invalid instruction.
By using a diagnostic we report the error to the user in release
builds. I think there may still be a later fatal error from
the code emitter though.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97970
The three bit nf is one less than the number of NFIELDS,
so we manually decrement 1 for VS1/2/4/8R & VL1/2/4/8R.
Reviewed By: craig.topper
Differential revision: https://reviews.llvm.org/D98185
While working on adding fixed-length vectors to the calling convention,
it was necessary to be able to query for a fixed-length vector container
type without access to an instance of SelectionDAG.
This patch modifies the "main" getContainerForFixedLengthVector function
to use an instance of TargetLowering rather than SelectionDAG, and
preserves the SelectionDAG overload as a wrapper.
An additional non-static version of the function was also added to
simplify the common case in RISCVTargetLowering.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97925
A setcc can be created during LegalizeDAG after select_cc has been
created. This combine will enable us to fold these late setccs.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98132
This pattern occurs when lowering for overflow operations
introduce an xor after select_cc has already been formed.
I had to rework another combine that looked for select_cc of an xor
with 1. That xor will now get combined away so we just need to
look for the RHS of the select_cc being 1.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98130
By implementing the method "unsigned RISCVTTIImpl::getRegisterBitWidth(bool Vector)",
fixed-length vectorization is enabled when possible. Without this method, the
"#pragma clang loop" directive is needed to enable vectorization(or the cost model
may inform LLVM that "Vectorization is possible but not beneficial").
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97549
This patch addresses a compiler crash resulting from passing a
fixed-length type to one that expects scalable vector types. An
assertion was added to prevent this regressing in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97868
This patch fixes up one case where the fixed-length-vector VL was
dropped (falling back to VLMAX) when inserting vector elements, as the
code would lower via ISD::INSERT_VECTOR_ELT (at index 0) which loses the
fixed-length vector information.
To this end, a custom node, VMV_S_XF_VL, was introduced to carry the VL
operand through to the final instruction. This node wraps the RVV
vmv.s.x and vmv.s.f instructions, which were being selected by
insert_vector_elt anyway.
There should be no observable difference in scalable-vector codegen.
There is still one outstanding drop from fixed-length VL to VLMAX, when
an i64 element is inserted into a vector on RV32; the splat (which is
custom legalized) has no notion of the original fixed-length vector
type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97842
To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
This patch enables support for lowering INSERT_VECTOR_ELT on
fixed-length vector types. The strategy follows that for scalable vector
types.
This patch also includes a quick fix to prevent the compiler infinitely
looping between lowering BUILD_VECTOR as VECTOR_SHUFFLE and back again.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97698
The default expansion of CONCAT_VECTORS goes through the stack. This
patch avoids that penalty by custom-lowering CONCAT_VECTORS to a series
of INSERT_SUBVECTOR nodes. Futher optimizations are possible, but this
is a good start.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97692
Like with EXTRACT_SUBVECTOR, INSERT_SUBVECTOR poses a problem
for vector masks as RVV isn't able to slide mask types around. We choose
instead to bitcast to equivalently-sized i8 types where we can, else we
zero-extend, perform the operation, and truncate back down.
One test was left disabled due to a crash in the legalizer.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97559
This patch fixes a bug where the lowering for INSERT_SUBVECTOR and
EXTRACT_SUBVECTOR would insist on first extracting a register-aligned
LMUL1 vector type before perfoming the slide up/down. This was even if
the vector was a fractional LMUL type, in which case the aligned
EXTRACT_SUBVECTOR was invalid.
This issue only occurred for scalable vector types, but a variety of
tests for both scalable and fixed-length vectors have been added to
ensure this does not regress in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97556
This patch unifies the two disparate paths for lowering INSERT_SUBVECTOR
operations under one roof. Consequently, with this patch it is possible to
support any fixed-length subvector insertion, not just "cast-like" ones.
As before, support for the insertion of mask vectors will come in a
separate patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97543
This patch adds support for extracting subvectors from vector masks.
This can be either extracting a scalable vector from another, or a fixed-length
vector from a fixed-length or scalable vector.
Since RVV lacks a way to slide vector masks down on an element-wise
basis and we don't know the true length of the vector registers, in many
cases we must resort to using equivalently-sized i8 vectors to perform
the operation. When this is not possible we fall back and extend to a
suitable i8 vector.
Support was also added for fixed-length truncation to mask types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97475
Fraser Cormack