If SLP vectorizer tries to extend the scheduling region and runs out of
the budget too early, but still extends the region to the new ending
instructions (i.e., it was able to extend the region for the first
instruction in the bundle, but not for the second), the compiler need to
recalculate dependecies in full, just like if the extending was
successfull. Without it, the schedule data chunks may end up with the
wrong number of (unscheduled) dependecies and it may end up with the
incorrect function, where the vectorized instruction does not dominate
on the extractelement instruction.
Differential Revision: https://reviews.llvm.org/D98531
This adds an Mask ArrayRef to getShuffleCost, so that if an exact mask
can be provided a more accurate cost can be provided by the backend.
For example VREV costs could be returned by the ARM backend. This should
be an NFC until then, laying the groundwork for that to be added.
Differential Revision: https://reviews.llvm.org/D98206
The `hasIrregularType` predicate checks whether an array of N values of type Ty is "bitcast-compatible" with a <N x Ty> vector.
The previous check returned invalid results in some cases where there's some padding between the array elements: eg. a 4-element array of u7 values is considered as compatible with <4 x u7>, even though the vector is only loading/storing 28 bits instead of 32.
The problem causes LLVM to generate incorrect code for some targets: for AArch64 the vector loads/stores are lowered in terms of ubfx/bfi, effectively losing the top (N * padding bits).
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D97465
This adds the cost of an i1 extract and a branch to the cost in
getMemInstScalarizationCost when the instruction is predicated. These
predicated loads/store would generate blocks of something like:
%c1 = extractelement <4 x i1> %C, i32 1
br i1 %c1, label %if, label %else
if:
%sa = extractelement <4 x i32> %a, i32 1
%sb = getelementptr inbounds float, float* %pg, i32 %sa
%sv = extractelement <4 x float> %x, i32 1
store float %sa, float* %sb, align 4
else:
So this increases the cost by the extract and branch. This is probably
still too low in many cases due to the cost of all that branching, but
there is already an existing hack increasing the cost using
useEmulatedMaskMemRefHack. It will increase the cost of a memop if it is
a load or there are more than one store. This patch improves the cost
for when there is only a single store, and hopefully at some point in
the future the hack can be removed.
Differential Revision: https://reviews.llvm.org/D98243
Current SLP pass has this piece of code that inserts a trunc instruction
after the vectorized instruction. In the case that the vectorized instruction
is a phi node and not the last phi node in the BB, the trunc instruction
will be inserted between two phi nodes, which will trigger verify problem
in debug version or unpredictable error in another pass.
This patch changes the algorithm to 'if the last vectorized instruction
is a phi, insert it after the last phi node in current BB' to fix this problem.
The motivation is to handle integer min/max reductions independently
of whether they are in the current cmp+sel form or the planned intrinsic
form.
We assumed that min/max included a select instruction, but we can
decouple that implementation detail by checking the instructions
themselves rather than relying on the recurrence (reduction) type.
Instead of maintaining a separate map from predicated instructions to
recipes, we can instead directly look at the VP operands. If the operand
comes from a predicated instruction, the operand will be a
VPPredInstPHIRecipe with a VPReplicateRecipe as its operand.
This patch adds support for reverse loop vectorization.
It is possible to vectorize the following loop:
```
for (int i = n-1; i >= 0; --i)
a[i] = b[i] + 1.0;
```
with fixed or scalable vector.
The loop-vectorizer will use 'reverse' on the loads/stores to make
sure the lanes themselves are also handled in the right order.
This patch adds support for scalable vector on IRBuilder interface to
create a reverse vector. The IR function
CreateVectorReverse lowers to experimental.vector.reverse for scalable vector
and keedp the original behavior for fixed vector using shuffle reverse.
Differential Revision: https://reviews.llvm.org/D95363
This patch fixes a crash when trying to get a scalar value using
VPTransformState::get() for uniform induction values or truncated
induction values. IVs and truncated IVs can be uniform and the updated
code accounts for that, fixing the crash.
This should fix
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=31981
Associative reduction matcher in SLP begins with select instruction but when
it reached call to llvm.umax (or alike) via def-use chain the latter also matched
as UMax kind. The routine's later code assumes matched instruction to be a select
and thus it merely died on the first encountered cast that did not fit.
Differential Revision: https://reviews.llvm.org/D98432
Add support to widen select instructions in VPlan native path by using a correct recipe when such instructions are encountered. This is already used by inner loop vectorizer.
Previously select instructions get handled by the wrong recipe and resulted in unreachable instruction errors like this one: https://bugs.llvm.org/show_bug.cgi?id=48139.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D97136
Add support to widen call instructions in VPlan native path by using a correct recipe when such instructions are encountered. This is already used by inner loop vectorizer.
Previously call instructions got handled by wrong recipes and resulted in unreachable instruction errors like this one: https://bugs.llvm.org/show_bug.cgi?id=48139.
Patch by Mauri Mustonen <mauri.mustonen@tuni.fi>
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D97278
There are certain loops like this below:
for (int i = 0; i < n; i++) {
a[i] = b[i] + 1;
*inv = a[i];
}
that can only be vectorised if we are able to extract the last lane of the
vectorised form of 'a[i]'. For fixed width vectors this already works since
we know at compile time what the final lane is, however for scalable vectors
this is a different story. This patch adds support for extracting the last
lane from a scalable vector using a runtime determined lane value. I have
added support to VPIteration for runtime-determined lanes that still permit
the caching of values. I did this by introducing a new class called VPLane,
which describes the lane we're dealing with and provides interfaces to get
both the compile-time known lane and the runtime determined value. Whilst
doing this work I couldn't find any explicit tests for extracting the last
lane values of fixed width vectors so I added tests for both scalable and
fixed width vectors.
Differential Revision: https://reviews.llvm.org/D95139
This code assumed that FP math was only permissable if it was
fully "fast", so it hard-coded "fast" when creating new instructions.
The underlying code already allows matching recurrences/reductions
that are only "reassoc", so this change should prevent the potential
miscompile seen in the test diffs (we created "fast" ops even though
none existed in the original code).
I don't know if we need to create the temporary IRBuilder objects
used here, so that could be follow-up clean-up.
There's an open question about whether we should require "nsz" in
addition to "reassoc" here. InstCombine uses that combo for its
reassociative folds, but I think codegen is not as strict.
Similar to b3a33553ae, but this shows a TODO and a potential
miscompile is already present.
We are tracking an FP instruction that does *not* have FMF (reassoc)
properties, so calling that "Unsafe" seems opposite of the common
reading.
I also removed one getter method by rolling the null check into
the access. Further simplification may be possible.
The motivation is to clean up the interactions between FMF and
function-level attributes in these classes and their callers.
The new test shows that there is an existing bug somewhere in
the callers. We assumed that the original code was fully 'fast'
and so we produced IR with 'fast' even though it was just 'reassoc'.
We are tracking an FP instruction that does *not* have FMF (reassoc)
properties, so calling that "Unsafe" seems opposite of the common
reading.
I also removed one getter method by rolling the null check into
the access. Further simplification seems possible.
The motivation is to clean up the interactions between FMF and
function-level attributes in these classes and their callers.
It is possible to merge reuse and reorder shuffles and reduce the total
cost of the vectorization tree/number of final instructions.
Differential Revision: https://reviews.llvm.org/D94992
Update the deletion order when destroying VPBasicBlocks. This ensures
recipes that depend on earlier ones in the block are removed first.
Otherwise this may cause issues when recipes have remaining users later
in the block.
This patch updates LV to generate the runtime checks just after cost
modeling, to allow a more precise estimate of the actual cost of the
checks. This information will be used in future patches to generate
larger runtime checks in cases where the checks only make up a small
fraction of the expected scalar loop execution time.
The runtime checks are created up-front in a temporary block to allow better
estimating the cost and un-linked from the existing IR. After deciding to
vectorize, the checks are moved backed. If deciding not to vectorize, the
temporary block is completely removed.
This patch is similar in spirit to D71053, but explores a different
direction: instead of delaying the decision on whether to vectorize in
the presence of runtime checks it instead optimistically creates the
runtime checks early and discards them later if decided to not
vectorize. This has the advantage that the cost-modeling decisions
can be kept together and can be done up-front and thus preserving the
general code structure. I think delaying (part) of the decision to
vectorize would also make the VPlan migration a bit harder.
One potential drawback of this patch is that we speculatively
generate IR which we might have to clean up later. However it seems like
the code required to do so is quite manageable.
Reviewed By: lebedev.ri, ebrevnov
Differential Revision: https://reviews.llvm.org/D75980
This reverts the revert commit 437f0bbcd5.
It adds a new toVPRecipeResult, which forces VPRecipeOrVPValueTy to be
constructed with a VPRecipeBase *. This should address ambiguous
constructor issues for recipe sub-types that also inherit from VPValue.
Generalize the return value of tryToCreateWidenRecipe to return either a
newly create recipe or an existing VPValue. Use this to avoid creating
unnecessary VPBlendRecipes.
Fixes PR44800.
As a followup to D95291, getOperandsScalarizationOverhead was still
using a VF as a vector factor if the arguments were scalar, and would
assert on certain matrix intrinsics with differently sized vector
arguments. This patch removes the VF arg, instead passing the Types
through directly. This should allow it to more accurately compute the
cost without having to guess at which operands will be vectorized,
something difficult with more complex intrinsics.
This adjusts one SVE test as it is now calling the wrong intrinsic vs
veccall. Without invalid InstructCosts the cost of the scalarized
intrinsic is too low. This should get fixed when the cost of
scalarization is accounted for with scalable types.
Differential Revision: https://reviews.llvm.org/D96287
getIntrinsicInstrCost takes a IntrinsicCostAttributes holding various
parameters of the intrinsic being costed. It can either be called with a
scalar intrinsic (RetTy==Scalar, VF==1), with a vector instruction
(RetTy==Vector, VF==1) or from the vectorizer with a scalar type and
vector width (RetTy==Scalar, VF>1). A RetTy==Vector, VF>1 is considered
an error. Both of the vector modes are expected to be treated the same,
but because this is confusing many backends end up getting it wrong.
Instead of trying work with those two values separately this removes the
VF parameter, widening the RetTy/ArgTys by VF used called from the
vectorizer. This keeps things simpler, but does require some other
modifications to keep things consistent.
Most backends look like this will be an improvement (or were not using
getIntrinsicInstrCost). AMDGPU needed the most changes to keep the code
from c230965ccf working. ARM removed the fix in
dfac521da1, webassembly happens to get a fixup for an SLP cost
issue and both X86 and AArch64 seem to now be using better costs from
the vectorizer.
Differential Revision: https://reviews.llvm.org/D95291
Pointer operand of scatter loads does not remain scalar in the tree (it
gest vectorized) and thus must not be marked as the scalar that remains
scalar in vectorized form.
Differential Revision: https://reviews.llvm.org/D96818
This patch extends VPWidenPHIRecipe to manage pairs of incoming
(VPValue, VPBasicBlock) in the VPlan native path. This is made possible
because we now directly manage defined VPValues for recipes.
By keeping both the incoming value and block in the recipe directly,
code-generation in the VPlan native path becomes independent of the
predecessor ordering when fixing up non-induction phis, which currently
can cause crashes in the VPlan native path.
This fixes PR45958.
Reviewed By: sguggill
Differential Revision: https://reviews.llvm.org/D96773
Now that all state for generated instructions is managed directly in
VPTransformState, VPCallBack is no longer needed. This patch updates the
last use of `getOrCreateScalarValue` to instead manage the value
directly in VPTransformState and removes VPCallback.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D95383
Floating point conversions inside vectorized loops have performance
implications but are very subtle. The user could specify a floating
point constant, or call a function without realizing that it will
force a change in the vector width. An example of this behaviour is
seen in https://godbolt.org/z/M3nT6c . The vectorizer should indicate
when this happens becuase it is most likely unintended behaviour.
This patch adds a simple check for this behaviour by following floating
point stores in the original loop and checking if a floating point
conversion operation occurs.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D95539
This patch enables scalable vectorization of loops with integer/fast reductions, e.g:
```
unsigned sum = 0;
for (int i = 0; i < n; ++i) {
sum += a[i];
}
```
A new TTI interface, isLegalToVectorizeReduction, has been added to prevent
reductions which are not supported for scalable types from vectorizing.
If the reduction is not supported for a given scalable VF,
computeFeasibleMaxVF will fall back to using fixed-width vectorization.
Reviewed By: david-arm, fhahn, dmgreen
Differential Revision: https://reviews.llvm.org/D95245
This patch updates codegen to use VPValues to manage the generated
scalarized instructions.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D92285
This patch fixes pr48832 by correctly generating the mask when a poison value is involved.
Consider this CFG (which is a part of the input):
```
for.body: ; preds = %for.cond
br i1 true, label %cond.false, label %land.rhs
land.rhs: ; preds = %for.body
br i1 poison, label %cond.end, label %cond.false
cond.false: ; preds = %for.body, %land.rhs
br label %cond.end
cond.end: ; preds = %land.rhs, %cond.false
%cond = phi i32 [ 0, %cond.false ], [ 1, %land.rhs ]
```
The path for.body -> land.rhs -> cond.end should be taken when 'select i1 false, i1 poison, i1 false' holds (which means it's never taken); but VPRecipeBuilder::createEdgeMask was emitting 'and i1 false, poison' instead.
The former one successfully blocks poison propagation whereas the latter one doesn't, making the condition poison and thus causing the miscompilation.
SimplifyCFG has a similar bug (which didn't expose a real-world bug yet), and a patch for this is also ongoing (see https://reviews.llvm.org/D95026).
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D95217
Changes `getScalarizationOverhead` to return an invalid cost for scalable VFs
and adds some simple tests for loops containing a function for which
there is a vectorized variant available.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D96356
The individual recipes have been updated to manage their operands using
VPUser a while back. Now that the transition is done, we can instead
make VPRecipeBase a VPUser and get rid of the toVPUser helper.
This patch changes the VecDesc struct to use ElementCount
instead of an unsigned VF value, in preparation for
future work that adds support for vectorized versions of
math functions using scalable vectors. Since all I'm doing
in this patch is switching the type I believe it's a
non-functional change. I changed getWidestVF to now return
both the widest fixed-width and scalable VF values, but
currently the widest scalable value will be zero.
Differential Revision: https://reviews.llvm.org/D96011
This will be needed in the loop-vectorizer where the minimum VF
requested may be a scalable VF. getMinimumVF now takes an additional
operand 'IsScalableVF' that indicates whether a scalable VF is required.
Reviewed By: kparzysz, rampitec
Differential Revision: https://reviews.llvm.org/D96020
This patch is NFC and changes occurrences of `unsigned Width`
and `unsigned i` to work on type ElementCount instead.
This patch is a preparatory patch with the ultimate goal of making
`computeMaxVF()` return both a max fixed VF and a max scalable VF,
so that `selectVectorizationFactor()` can pick the most cost-effective
vectorization factor.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D96019
This patch is NFC and changes occurrences of `unsigned MaxVectorSize`
to work on type ElementCount.
This patch is a preparatory patch with the ultimate goal of making
`computeMaxVF()` return both a max fixed VF and a max scalable VF,
so that `selectVectorizationFactor()` can pick the most cost-effective
vectorization factor.
Reviewed By: kmclaughlin
Differential Revision: https://reviews.llvm.org/D96018
VP blocks keep track of a condition, which is a VPValue. This patch
updates VPBlockBase to manage the value using VPUser, so
replaceAllUsesWith properly updates the condition bit as well.
This is required to enable VP2VP transformations and it helps with
simplifying some of the code required to manage condition bits.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D95382
This reverts commit 502a67dd7f.
This expose a failure in test-suite build on PowerPC,
revert to unblock buildbot first,
Dave will re-commit in https://reviews.llvm.org/D96287.
Thanks Dave.
Alexey Bataev