Summary:
- `RegisterVar` has `void` return type and `size_t` in its variable size
parameter in HIP or CUDA 9.0+.
Reviewers: tra, yaxunl
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77398
Summary:
As defined by Arm C Language Extensions (ACLE) these macro defines
should be set to specific values depending on -mbranch-protection.
Reviewers: chill
Reviewed By: chill
Subscribers: danielkiss, cfe-commits, kristof.beyls
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77134
This is a cleanup and normalization patch that also enables reuse with
Flang later on. A follow up will clean up and move the directive ->
clauses mapping.
Differential Revision: https://reviews.llvm.org/D77112
This API is used by LLDB to attach owning module information to
Declarations deserialized from DWARF.
Differential Revision: https://reviews.llvm.org/D75561
Currently, bpf does not specify 128bit alignment in its
layout spec. So for a structure like
struct ipv6_key_t {
unsigned pid;
unsigned __int128 saddr;
unsigned short lport;
};
clang will generate IR type
%struct.ipv6_key_t = type { i32, [12 x i8], i128, i16, [14 x i8] }
Additional padding is to ensure later IR->MIR can generate correct
stack layout with target layout spec.
But it is common practice for a tracing program to be
first compiled with target flag (e.g., x86_64 or aarch64) through
clang to generate IR and then go through llc to generate bpf
byte code. Tracing program often refers to kernel internal
data structures which needs to be compiled with non-bpf target.
But such a compilation model may cause a problem on aarch64.
The bcc issue https://github.com/iovisor/bcc/issues/2827
reported such a problem.
For the above structure, since aarch64 has "i128:128" in its
layout string, the generated IR will have
%struct.ipv6_key_t = type { i32, i128, i16 }
Since bpf does not have "i128:128" in its spec string,
the selectionDAG assumes alignment 8 for i128 and
computes the stack storage size for the above is 32 bytes,
which leads incorrect code later.
The x86_64 does not have this issue as it does not have
"i128:128" in its layout spec as it does permits i128 to
be alignmented at 8 bytes at stack. Its IR type looks like
%struct.ipv6_key_t = type { i32, [12 x i8], i128, i16, [14 x i8] }
The fix here is add i128 support in layout spec, the same as
aarch64. The only downside is we may have less optimal stack
allocation in certain cases since we require 16byte alignment
for i128 instead of 8. But this is probably fine as i128 is
not used widely and in most cases users should already
have proper alignment.
Differential Revision: https://reviews.llvm.org/D76587
The main purpose of introducing these builtins is to add a range
metadata [1, 1025) on the work group size loaded from dispatch
ptr, which cannot be done by source code.
Differential Revision: https://reviews.llvm.org/D76772
This is the first part extracted from D71179 and cleaned up.
This patch provides parsing support for `omp begin/end declare variant`,
as defined in OpenMP technical report 8 (TR8) [0].
A major purpose of this patch is to provide proper math.h/cmath support
for OpenMP target offloading. See PR42061, PR42798, PR42799. The current
code was developed with this feature in mind, see [1].
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D74941
Summary:
This patch introduces command-line support for the Armv8.6-a architecture and assembly support for BFloat16. Details can be found
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
in addition to the GCC patch for the 8..6-a CLI:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-11/msg02647.html
In detail this patch
- march options for armv8.6-a
- BFloat16 assembly
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
Based on work by:
- labrinea
- MarkMurrayARM
- Luke Cheeseman
- Javed Asbar
- Mikhail Maltsev
- Luke Geeson
Reviewers: SjoerdMeijer, craig.topper, rjmccall, jfb, LukeGeeson
Reviewed By: SjoerdMeijer
Subscribers: stuij, kristof.beyls, hiraditya, dexonsmith, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D76062
Summary:
This patch adds a virtual method `getCPUCacheLineSize()` to `TargetInfo`. Currently, I've only implemented the method in `X86TargetInfo`. It's extremely important that each CPU's cache line size correct (e.g., we can't just define it as `64` across the board) so, it has been a little slow getting to this point.
I'll work on the ARM CPUs next, but that will probably come later in a different patch.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D74918
Currently square-bracket-style (CXX11/C2X) attribute names are normalised to
start with :: if they don't have a namespace. This is a bit odd, as such
names are rejected when parsing, so don't do this.
Differential Revision: https://reviews.llvm.org/D76704
Reworked the patch to avoid sharing a header (SVETypeFlags.h) between
include/clang/Basic and utils/TableGen/SveEmitter.cpp. Now the patch
generates the enum/flags which is included in TargetBuiltins.h.
Also renamed one of the SveEmitter options to be in line with MVE.
Summary:
This is a first patch in a series for the SveEmitter to generate the arm_sve.h
header file and builtins.
I've tried my best to strip down this patch as best as I could, but there
are still a few changes that are not necessarily exercised by the load intrinsics
in this patch, mostly around the SVEType class which has some common logic to
represent types from a type and prototype string. I thought it didn't make
much sense to remove that from this patch and split it up.
This flag is used by avr-gcc (starting with v10) to set the width of the
double type. The double type is by default interpreted as a 32-bit
floating point number in avr-gcc instead of a 64-bit floating point
number as is common on other architectures. Starting with GCC 10, a new
option has been added to control this behavior:
https://gcc.gnu.org/wiki/avr-gcc#Deviations_from_the_Standard
This commit keeps the default double at 32 bits but adds support for the
-mdouble flag (-mdouble=32 and -mdouble=64) to control this behavior.
Differential Revision: https://reviews.llvm.org/D76181
Summary:
Adds the constraints described below to ensure that we
can tie variables of SVE ACLE types to operands in inline-asm:
- y: SVE registers Z0-Z7
- Upl: One of the low eight SVE predicate registers (P0-P7)
- Upa: Full range of SVE predicate registers (P0-P15)
Reviewers: sdesmalen, huntergr, rovka, cameron.mcinally, efriedma, rengolin
Reviewed By: efriedma
Subscribers: miyuki, tschuett, rkruppe, psnobl, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75690
This is a first patch in a series for the SveEmitter to generate the arm_sve.h
header file and builtins.
I've tried my best to strip down this patch as best as I could, but there
are still a few changes that are not necessarily exercised by the load intrinsics
in this patch, mostly around the SVEType class which has some common logic to
represent types from a type and prototype string. I thought it didn't make
much sense to remove that from this patch and split it up.
Reviewers: efriedma, rovka, SjoerdMeijer, rsandifo-arm, rengolin
Reviewed By: SjoerdMeijer
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75470
Most clients of SourceManager.h need to do things like turning source
locations into file & line number pairs, but this doesn't require
bringing in FileManager.h and LLVM's FS headers.
The main code change here is to sink SM::createFileID into the cpp file.
I reason that this is not performance critical because it doesn't happen
on the diagnostic path, it happens along the paths of macro expansion
(could be hot) and new includes (less hot).
Saves some includes:
309 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileManager.h
272 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileSystemOptions.h
271 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/VirtualFileSystem.h
267 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/FileSystem.h
266 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/Chrono.h
Differential Revision: https://reviews.llvm.org/D75406
Module.h takes 86ms to parse, mostly parsing the class itself. Avoid it
if possible. ASTContext.h depends on ExternalASTSource.h.
A few NFC changes were needed to make this possible:
- Move ASTSourceDescriptor to Module.h. This needs Module to be
complete, and seems more related to modules and AST files than
external AST sources.
- Move "import complete" bit from Module* pointer int pair to
NextLocalImport pointer. Required because PointerIntPair<Module*,...>
requires Module to be complete, and now it may not be.
Reviewed By: aaron.ballman, hans
Differential Revision: https://reviews.llvm.org/D75784
Summary:
This patch implements feature test macros for the CDE extension
according to the upcoming ACLE specification.
The following 2 macros are being added:
- __ARM_FEATURE_CDE - defined as '1' when any coprocessor is
configured as a CDE coprocessor
- __ARM_FEATURE_CDE_COPROC - defined as an 8-bit mask, each bit of the
mask corresponds to a coprocessor and is set when the corresponding
coprocessor is configured as CDE (and cleared otherwise).
The patch also exposes the value of __ARM_FEATURE_CDE_COPROC in the
target-independent method TargetInfo::getARMCDECorpocMask, the method
will be used in follow-up patches implementing semantic checks of CDE
intrinsics (we want to diagnose the cases when CDE intrinsics are used
with coprocessors that are not configured as CDE).
Reviewers: simon_tatham, dmgreen, ostannard, MarkMurrayARM
Reviewed By: simon_tatham
Subscribers: kristof.beyls, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75843
FileManager.h is an expensive header (~350ms for me in isolation), so
try to do without it.
Notably, we need to avoid checking the alignment of FileEntry, which
happens for DenseMap<FileEntry*> and PointerUnion<FileEntry*>. I
adjusted the code to avoid PointerUnion, and moved the DenseMap
insertion to the .cpp file.
Globally, this only saved about ~17 includes of the related headers
because SourceManager.h still includes FileManager.h, and it is more
popular than Module.h.
When constructing a ParsedAttr the ParsedAttrInfo gets looked up in the
AttrInfoMap, which is auto-generated using tablegen. If that lookup fails then
we look through the ParsedAttrInfos that plugins have added to the registry and
check if any has a spelling that matches.
Differential Revision: https://reviews.llvm.org/D31338
This PR enables "XL" C++ ABI in frontend AST to IR codegen. And it is driven by
static init work. The current kind in Clang by default is Generic Itanium, which
has different behavior on static init with IBM xlclang compiler on AIX.
Differential Revision: https://reviews.llvm.org/D74015
Make Clang on aarch64 targets predefine `__AARCH64_CMODEL_SMALL__`
or `__AARCH64_CMODEL_TINY__`, etc. These are the names that GCC
uses for its predefines.
Reviewed By: tamur, MaskRay
Differential Revision: https://reviews.llvm.org/D75002
This commit removes the artificial types <512 x i1> and <1024 x i1>
from HVX intrinsics, and makes v512i1 and v1024i1 no longer legal on
Hexagon.
It may cause existing bitcode files to become invalid.
* Converting between vector predicates and vector registers must be
done explicitly via vandvrt/vandqrt instructions (their intrinsics),
i.e. (for 64-byte mode):
%Q = call <64 x i1> @llvm.hexagon.V6.vandvrt(<16 x i32> %V, i32 -1)
%V = call <16 x i32> @llvm.hexagon.V6.vandqrt(<64 x i1> %Q, i32 -1)
The conversion intrinsics are:
declare <64 x i1> @llvm.hexagon.V6.vandvrt(<16 x i32>, i32)
declare <128 x i1> @llvm.hexagon.V6.vandvrt.128B(<32 x i32>, i32)
declare <16 x i32> @llvm.hexagon.V6.vandqrt(<64 x i1>, i32)
declare <32 x i32> @llvm.hexagon.V6.vandqrt.128B(<128 x i1>, i32)
They are all pure.
* Vector predicate values cannot be loaded/stored directly. This directly
reflects the architecture restriction. Loading and storing or vector
predicates must be done indirectly via vector registers and explicit
conversions via vandvrt/vandqrt instructions.
This swaps out the OpenMPDefaultClauseKind enum with a
llvm::omp::DefaultKind enum which is stored in OMPConstants.h.
This should not change any functionality.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D74513
Michael Liao