Summary: llvm/IR/GlobalValue.h can't be included in MC, that creates a circular dependency between MC and IR libraries. This circular dependency is causing an issue for build system that enforce layering.
Author: Xiangling_L
Reviewers: sfertile, jasonliu, hubert.reinterpretcast, gribozavr
Reviewed By: gribozavr
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64445
llvm-svn: 365701
Summary:
"ww" and "ws" are both constraint codes for VSX vector registers that
hold scalar double data. "ww" is preferred for float while "ws" is
preferred for double.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D64119
llvm-svn: 365106
Summary:
This is the backend part of [[ https://bugs.llvm.org/show_bug.cgi?id=42457 | PR42457 ]].
In middle-end, we'd want to prefer the form with two adds - D63992,
but as this diff shows, not every target will prefer that pattern.
Out of 4 targets for which i added tests all seem to be ok with inc-of-add for scalars,
but only X86 prefer that same pattern for vectors.
Here i'm adding a new TLI hook, always defaulting to the inc-of-add,
but adding AArch64,ARM,PowerPC overrides to prefer inc-of-add only for scalars.
Reviewers: spatel, RKSimon, efriedma, t.p.northover, hfinkel
Reviewed By: efriedma
Subscribers: nemanjai, javed.absar, kristof.beyls, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64090
llvm-svn: 365010
This was reported in https://bugs.llvm.org/show_bug.cgi?id=41751
llvm-mc aborted when disassembling tabortdc.
This patch try to clean up TM related DAGs.
* Fixes the problem by remove explicit output of cr0, and put it as implicit def.
* Update int_ppc_tbegin pattern to accommodate the implicit def of cr0.
* Update the TCHECK operand and int_ppc_tcheck accordingly.
* Add some builtin test and disassembly tests.
* Remove unused CRRC0/crrc0
Differential Revision: https://reviews.llvm.org/D61935
llvm-svn: 364544
This was just an omission in the back end. We have had the instructions for both
single and double precision for a few HW generations, but never got around to
legalizing these.
Differential revision: https://reviews.llvm.org/D63634
llvm-svn: 364373
Avoids using a plain unsigned for registers throughoug codegen.
Doesn't attempt to change every register use, just something a little
more than the set needed to build after changing the return type of
MachineOperand::getReg().
llvm-svn: 364191
Summary:
SPE passes doubles the same as soft-float, in register pairs as i32
types. This is all handled by the target-independent layer. However,
this is not optimal when splitting or reforming the doubles, as it
pushes to the stack and loads from, on either side.
For instance, to pass a double argument to a function, assuming the
double value is in r5, the sequence currently looks like this:
evstdd 5, X(1)
lwz 3, X(1)
lwz 4, X+4(1)
Likewise, to form a double into r5 from args in r3 and r4:
stw 3, X(1)
stw 4, X+4(1)
evldd 5, X(1)
This optimizes the fence to use SPE instructions. Now, to pass a double
to a function:
mr 4, 5
evmergehi 3, 5, 5
And to form a double into r5 from args in r3 and r4:
evmergelo 5, 3, 4
This is comparable to the way that gcc generates the double splits.
This also fixes a bug with expanding builtins to libcalls, where the
LowerCallTo() code path was generating intermediate illegal type nodes.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54583
llvm-svn: 363526
Summary:
If the nested loop is an innermost loop, prefer to a 32-byte alignment, so that
we can decrease cache misses and branch-prediction misses. Actual alignment of
the loop will depend on the hotness check and other logic in alignBlocks.
The old code will only align hot loop to 32 bytes when the LoopSize larger than
16 bytes and smaller than 32 bytes, this patch will align the innermost hot loop
to 32 bytes not only for the hot loop whose size is 16~32 bytes.
Reviewed By: steven.zhang, jsji
Differential Revision: https://reviews.llvm.org/D61228
llvm-svn: 363495
As discussed on D62910, we need to check whether particular types of memory access are allowed, not just their alignment/address-space.
This NFC patch adds a MachineMemOperand::Flags argument to allowsMemoryAccess and allowsMisalignedMemoryAccesses, and wires up calls to pass the relevant flags to them.
If people are happy with this approach I can then update X86TargetLowering::allowsMisalignedMemoryAccesses to handle misaligned NT load/stores.
Differential Revision: https://reviews.llvm.org/D63075
llvm-svn: 363179
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
llvm-svn: 362774
Use the PPC vector min/max instructions for computing the corresponding
operation as these should be faster than the compare/select sequences
we currently emit.
Differential revision: https://reviews.llvm.org/D47332
llvm-svn: 362759
Summary:
(1) Function descriptor on AIX
On AIX, a called routine may have 2 distinct symbols associated with it:
* A function descriptor (Name)
* A function entry point (.Name)
The descriptor structure on AIX is the same as those in the ELF V1 ABI:
* The address of the entry point of the function.
* The TOC base address for the function.
* The environment pointer.
The descriptor symbol uses the same name as the source level function in C.
The function entry point is analogous to the symbol we would generate for a
function in a non-descriptor-based ABI, except that it is renamed by
prepending a ".".
Which symbol gets referenced depends on the context:
* Taking the address of the function references the descriptor symbol.
* Calling the function references the entry point symbol.
(2) Speaking of implementation on AIX, for direct function call target, we
create proper MCSymbol SDNode(e.g . ".foo") while constructing SDAG to
replace original TargetGlobalAddress SDNode. Then down the path, we can
take advantage of this MCSymbol.
Patch by: Xiangling_L
Reviewed by: sfertile, hubert.reinterpretcast, jasonliu, syzaara
Differential Revision: https://reviews.llvm.org/D62532
llvm-svn: 362735
Summary:
This patch implements SDAG call lowering on AIX for functions
which only have parameters that could fit into GPRs.
Reviewers: hubert.reinterpretcast, syzaara
Differential Revision: https://reviews.llvm.org/D62823
llvm-svn: 362708
Summary:dd
This patch implements call lowering for calls without parameters
on AIX as initial support.
Reviewers: sfertile, hubert.reinterpretcast, aheejin, efriedma
Differential Revision: https://reviews.llvm.org/D61948
llvm-svn: 361669
The single-constant algorithm produces infinities on a lot of denormal values.
The precision of the two-constant algorithm is actually sufficient across the
range of denormals. We will switch to that algorithm for now to avoid the
infinities on denormals. In the future, we will re-evaluate the algorithm to
find the optimal one for PowerPC.
Differential revision: https://reviews.llvm.org/D60037
llvm-svn: 360144
A condition for exiting the legalization of v4i32 conversion to v2f64 through
extract/convert/build erroneously checks for the extract having type i32.
This is not adequate as smaller extracts are actually legalized to i32 as well.
Furthermore, an early exit is missing which means that we only check that
both extracts are from the same vector if that check fails.
As a result, both cases in the included test case fail - the first gets a
select error and the second generates incorrect code.
The culprit commit is r274535.
llvm-svn: 360043
Summary:
Based on the Eli Friedman's comments in https://reviews.llvm.org/D60811 , we'd better return early if the element type is not byte-sized in `combineBVOfConsecutiveLoads`.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D61076
llvm-svn: 359764
The MachineFunction wasn't used in getOptimalMemOpType, but more importantly,
this allows reuse of findOptimalMemOpLowering that is calling getOptimalMemOpType.
This is the groundwork for the changes in D59766 and D59787, that allows
implementation of TTI::getMemcpyCost.
Differential Revision: https://reviews.llvm.org/D59785
llvm-svn: 359537
Change the PPCISelLowering.cpp function that decides to avoid update form in
favor of partial vector loads to know about newer load types and to not be
confused by the chain operand.
Differential Revision: https://reviews.llvm.org/D60102
llvm-svn: 359504
Using initial-exec TLS variables is a reasonable performance
optimisation for system libraries. Use the correct PIC mechanism to get
hold of the GOT to avoid text relocations.
Differential Revision: https://reviews.llvm.org/D61026
llvm-svn: 359146
Summary:
This issue from the bugzilla: https://bugs.llvm.org/show_bug.cgi?id=41177
When the two operands for BUILD_VECTOR are same, we will get assert error.
llvm::SDValue combineBVOfConsecutiveLoads(llvm::SDNode*, llvm::SelectionDAG&):
Assertion `!(InputsAreConsecutiveLoads && InputsAreReverseConsecutive) &&
"The loads cannot be both consecutive and reverse consecutive."' failed.
This error caused by the wrong ElemSIze when calling isConsecutiveLS(). We
should use `getScalarType().getStoreSize();` to get the ElemSize instread of
`getScalarSizeInBits() / 8`.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D60811
llvm-svn: 358644
Summary:
PowerPC64/PowerPC64le supports the builtin function __builtin_setrnd to set the floating point rounding mode. This function will use the least significant two bits of integer argument to set the floating point rounding mode.
double __builtin_setrnd(int mode);
The effective values for mode are:
0 - round to nearest
1 - round to zero
2 - round to +infinity
3 - round to -infinity
Note that the mode argument will modulo 4, so if the int argument is greater than 3, it will only use the least significant two bits of the mode. Namely, builtin_setrnd(102)) is equal to builtin_setrnd(2).
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D59405
llvm-svn: 357241
A shift and add/sub sequence combination is faster in place of a multiply by constant.
Because the cycle or latency of multiply is not huge, we only consider such following
worthy patterns.
```
(mul x, 2^N + 1) => (add (shl x, N), x)
(mul x, -(2^N + 1)) => -(add (shl x, N), x)
(mul x, 2^N - 1) => (sub (shl x, N), x)
(mul x, -(2^N - 1)) => (sub x, (shl x, N))
```
And the cycles or latency is subtarget-dependent so that we need consider the
subtarget to determine to do or not do such transformation.
Also data type is considered for different cycles or latency to do multiply.
Differential Revision: https://reviews.llvm.org/D58950
llvm-svn: 357233
These changes are related to PR37743 and include:
SelectionDAGBuilder::visitSelect handles the unary SelectPatternFlavor::SPF_ABS case to build ABS node.
Delete the redundant recognizer of the integer ABS pattern from the DAGCombiner.
Add promoting the integer ABS node in the LegalizeIntegerType.
Expand-based legalization of integer result for the ABS nodes.
Expand-based legalization of ABS vector operations.
Add some integer abs testcases for different typesizes for Thumb arch
Add the custom ABS expanding and change the SAD pattern recognizer for X86 arch: The i64 result of the ABS is expanded to:
tmp = (SRA, Hi, 31)
Lo = (UADDO tmp, Lo)
Hi = (XOR tmp, (ADDCARRY tmp, hi, Lo:1))
Lo = (XOR tmp, Lo)
The "detectZextAbsDiff" function is changed for the recognition of pattern with the ABS node. Given a ABS node, detect the following pattern:
(ABS (SUB (ZERO_EXTEND a), (ZERO_EXTEND b))).
Change integer abs testcases for codegen with the ABS node support for AArch64.
Indicate that the ABS is legal for the i64 type when the NEON is supported.
Change the integer abs testcases to show changing of codegen.
Add combine and legalization of ABS nodes for Thumb arch.
Extend 'matchSelectPattern' to recognize the ABS patterns with ICMP_SGE condition.
For discussion, see https://bugs.llvm.org/show_bug.cgi?id=37743
Patch by: @ikulagin (Ivan Kulagin)
Differential Revision: https://reviews.llvm.org/D49837
llvm-svn: 356468
This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
The PowerPC code generator currently scalarizes vector truncates that would fit in a vector register, resulting in vector extracts, scalar operations, and vector merges. This patch custom lowers a vector truncate that would fit in a register to a vector shuffle instead.
Differential Revision: https://reviews.llvm.org/D56507
llvm-svn: 353724
Move the CC analysis implementation to its own .cpp file instead of
duplicating it and artificually using functions in PPCISelLowering.cpp
and PPCFastISel.cpp. Follow-up to the same change done for X86, ARM, and
AArch64.
llvm-svn: 352444
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
For SDAG, we pretend patchpoints aren't special at all until we emit the code for the pseudo.
Then the verifier runs and it seems like we have a use of an undefined register (the register will
be reserved later, but the verifier doesn't know that).
So this patch call setUsesTOCBasePtr before emit the code for the pseudo, so verifier can know
X2 is a reserved register.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D56148
llvm-svn: 350165
A recent patch has added custom legalization of vector conversions of
v2i16 -> v2f64. This just rounds it out for other types where the input vector
has an illegal (narrower) type than the result vector. Specifically, this will
handle the following conversions:
v2i8 -> v2f64
v4i8 -> v4f32
v4i16 -> v4f32
Differential revision: https://reviews.llvm.org/D54663
llvm-svn: 350155
For atomic value operand which less than 4 bytes need to be masked.
And the related operation to calculate the newvalue can be done in 32 bit gprc.
So just use gprc for mask and value calculation.
Differential Revision: https://reviews.llvm.org/D56077
llvm-svn: 350113
Summary:
This patch is to fix the bug imported by rL341634.
In above submit , the the return type of ISD::ADDE is
14224: SDVTList VTs = DAG.getVTList(MVT::i64, MVT::i64),
but in fact, the second return type of ISD::ADDE should be
MVT::Glue not MVT::i64.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D55977
llvm-svn: 350061
For type v4i32/v8ii16/v16i8, do following transforms:
(vselect (setcc a, b, setugt), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setuge), (sub a, b), (sub b, a)) -> (vabsd a, b)
(vselect (setcc a, b, setult), (sub b, a), (sub a, b)) -> (vabsd a, b)
(vselect (setcc a, b, setule), (sub b, a), (sub a, b)) -> (vabsd a, b)
Differential Revision: https://reviews.llvm.org/D55812
llvm-svn: 349599
Improve the current vec_abs support on P9, generate ISD::ABS node for vector types,
combine ABS node to VABSD node for some special cases to make use of P9 VABSD* insns,
do custom lowering to vsub(vneg later)+vmax if it has no combination opportunity.
Differential Revision: https://reviews.llvm.org/D54783
llvm-svn: 349437
In theory, we should let the PPC target to determine how to lower the TOC Entry for globals.
And the PPCTargetLowering requires this query to do some optimization for TOC_Entry.
Differential Revision: https://reviews.llvm.org/D54925
llvm-svn: 348108
We have efficient codegen on P9 for lowering bswap that involves moving
the value into a vector reg and moving it back. However, the check under
which we custom lowered it did not adequately reflect the actual requirements.
It required only that the subtarget be an implementation of ISA 3.0 since all
compliant implementations have to provide the vector instructions.
However, the kernel builds have a valid use case for -mno-altivec -mcpu=pwr9
(i.e. don't emit vector code, don't have to save vector regs for context
switch). So we should require the correct features for this lowering.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39334
llvm-svn: 347376
Turns out that there was no check for a store that truncates down
to a single byte when combining a (store (bswap...)) into a byte-swapping
store. This patch just adds that check.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39478.
llvm-svn: 347288
To make ISD::VSELECT available(legal) so long as there are altivec instruction, otherwise it's default behavior is expanding,
which is legalized at type-legalization phase. Use xxsel to match vselect if vsx is open, or use vsel.
Differential Revision: https://reviews.llvm.org/D49531
llvm-svn: 346824
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
For both operands are bool, short, int, long, long long, add the following optimization.
1. 0-x == y --> x+y ==0
2. 0-x != y --> x+y != 0
Review: nemanjai
Differential Revision: https://reviews.llvm.org/D53360
llvm-svn: 345366
At present a v2i16 -> v2f64 convert is implemented by extracts to scalar,
scalar converts, and merge back into a vector. Use vector converts instead,
with the int data permuted into the proper position and extended if necessary.
Patch by RolandF.
Differential revision: https://reviews.llvm.org/D53346
llvm-svn: 345361
Add support to allow bit-casting from f128 to i128 and then
extracting 64 bits from the result.
Differential Revision: https://reviews.llvm.org/D49507
llvm-svn: 345053
For ISD::SIGN_EXTEND_INREG operation of v2i16 and v2i8 types will cause assert because they are registered as custom operation.
So that the type legalization phase will enter the custom hook, which do not handle ISD::SIGN_EXTEND_INREG operation and fall throw into unreachable assert.
Patch By: wuzish (Zixuan Wu)
Differential Revision: https://reviews.llvm.org/D52449
llvm-svn: 344109
This is the PPC-specific non-controversial part of
https://reviews.llvm.org/D44548 that simply enables this combine for PPC
since PPC has these instructions.
This commit will allow the target-independent portion to be truly target
independent.
llvm-svn: 344077
Building a vector out of multiple loads can be converted to a load of the vector type if the loads are consecutive.
But the special condition is that the element number is 1, such as <1 x i128>. So just early exit to fix the assert.
Patch By: wuzish (Zixuan Wu)
Differential Revision: https://reviews.llvm.org/D52072
llvm-svn: 342611
Summary:
Integer types smaller than i32 must be extended to i32 by default.
The feature "crbits" introduced at r202451 handles i1 as a special case,
but it did not extend properly.
The caller was, therefore, passing i1 stack arguments by writing 0/1 to
the first byte of the 4-byte stack object and callee was
reading the first byte for the value.
"crbits" is enabled if the optimization level is greater than 1,
which is very common in "release builds".
Such discrepancies with ABI specification also introduces
potential incompatibility with programs or libraries
built with other compilers e.g. GCC.
Fixes PR38661
Reviewers: hfinkel, cuviper
Subscribers: sylvestre.ledru, glaubitz, nagisa, nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D51108
llvm-svn: 342288
This commit has caused failures in some internal benchmarks. Temporarily
reverting this patch until the issue can be diagnosed and fixed.
llvm-svn: 340740
The internal benchmark failure reported by Google was due to a missing
check for the result type for the sign-extend and shift DAG. This commit
adds the check and re-commits the patch.
llvm-svn: 340734
This patch addresses:
- Implementation within PPCISelLowering.cpp to check if we should use direct
load into vector instructions (such as lxsd/lfd ) when the scalar_to_vector
function is used; which will allow us to catch as many cases of the
scalar_to_vector uses as possible to translate the ld->mtvsrd sequence into
lxsd.
- Test cases to exhibit the behaviour of emitting lxsd/lfd.
Patch by amyk
Differential revision: https://reviews.llvm.org/D49698
llvm-svn: 340037
Add a DAG combine for the PowerPC code generator to generate the Power9 extswsli
extend sign and shift immediate instruction.
Patch by RolandF.
Differential revision: https://reviews.llvm.org/D49879
llvm-svn: 340016
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
To make ISD::VSELECT available(legal) so long as there are altivec instruction,
otherwise it's default behavior is expanding.
Use xxsel to match vselect if vsx is open, or use vsel.
In order to do not write many patterns in td file, promote (for vector it's
bitcast) all other type into v4i32 and only pattern match vselect of v4i32 into
vsel or xxsel.
Patch by wuzish
Differential revision: https://reviews.llvm.org/D49531
llvm-svn: 339779
When trying to combine a DAG that builds a vector out of sign-extensions of
vector extracts, the code assumes legal input types. Due to that, we have to
disable this combine prior to legalization.
In some cases, the DAG will look slightly different after legalization so
account for that in the matching code.
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=38087
Differential Revision: https://reviews.llvm.org/D49080
llvm-svn: 339769
This patch aims to improve the codegen for vector loads involving the
scalar_to_vector (load X) sequence. Initially, ld->mv instructions were used
for scalar_to_vector (load X), so this patch allows scalar_to_vector (load X)
to utilize:
LXSD and LXSDX for i64 and f64
LXSIWAX for i32 (sign extension to i64)
LXSIWZX for i32 and f64
Committing on behalf of Amy Kwan.
Differential Revision: https://reviews.llvm.org/D48950
llvm-svn: 339260
Adding the FP_ROUND nodes when combining FP_TO_[SU]INT of elements
feeding a BUILD_VECTOR into an FP_TO_[SU]INT of the built vector
loses precision. This patch removes the code that adds these nodes
to true f64 operands. It also adds patterns required to ensure
the code is still vectorized rather than converting individual
elements and inserting into a vector.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38342
Differential Revision: https://reviews.llvm.org/D50121
llvm-svn: 338658
The vector contains the SDNodes that these functions create. The number of nodes is always a small number so we should use SmallVector to avoid a heap allocation.
llvm-svn: 338329
* Delete a no-longer-used override, and mark the other
getRegisterTypeForCallingConv() as override.
* SPE only supports i32, not i64, as the internal type, so simply remove
the type check, so that DestReg and Opc are provably always set.
GCC 6.4 did not warn about either of the above.
llvm-svn: 337350
Summary:
The Signal Processing Engine (SPE) is found on NXP/Freescale e500v1,
e500v2, and several e200 cores. This adds support targeting the e500v2,
as this is more common than the e500v1, and is in SoCs still on the
market.
This patch is very intrusive because the SPE is binary incompatible with
the traditional FPU. After discussing with others, the cleanest
solution was to make both SPE and FPU features on top of a base PowerPC
subset, so all FPU instructions are now wrapped with HasFPU predicates.
Supported by this are:
* Code generation following the SPE ABI at the LLVM IR level (calling
conventions)
* Single- and Double-precision math at the level supported by the APU.
Still to do:
* Vector operations
* SPE intrinsics
As this changes the Callee-saved register list order, one test, which
tests the precise generated code, was updated to account for the new
register order.
Reviewed by: nemanjai
Differential Revision: https://reviews.llvm.org/D44830
llvm-svn: 337347
Added __float128 support for a number of rounding operations:
trunc
rint
nearbyint
round
floor
ceil
Differential Revision: https://reviews.llvm.org/D48415
llvm-svn: 336601
Power 9 does not have a hardware instruction for frem but we can call fmodf128.
Differential Revision: https://reviews.llvm.org/D48552
llvm-svn: 336406
Map the following instructions to the proper float128 lib calls:
pow[i], exp[2], log[2|10], sin, cos, fmin, fmax
Differential Revision: https://reviews.llvm.org/D48544
llvm-svn: 336361
Non-homogenous aggregates are passed in consecutive GPRs, in GPRs and in memory,
or in memory. This patch ensures that float128 members of non-homogenous
aggregates are passed via VSX registers.
This is done via custom lowering a bitcast of a build_pari(i64,i64) to float128
to a new PPCISD node, BUILD_FP128.
Differential Revision: https://reviews.llvm.org/D48308
llvm-svn: 336310
Legalize and emit code for quad-precision floating point operation conversion of
single-precision value to quad-precision.
Differential Revision: https://reviews.llvm.org/D47569
llvm-svn: 336307
This patch enable parameter passing and return by value for float128 types.
Passing aggregate/union which contain float128 members will be submitted in
subsequent patches.
Differential Revision: https://reviews.llvm.org/D47552
llvm-svn: 336306
Legalize and emit code for round & convert float128 to double precision and
single precision.
Differential Revision: https://reviews.llvm.org/D46997
llvm-svn: 336299
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Existing DAG combine only handles conversions for FP_TO_SINT:
"{f32, f64} x { i32, i16 }"
This patch simplifies the code to handle:
"{ FP_TO_SINT, FP_TO_UINT } x { f64, f32 } x { i64, i32, i16, i8 }"
Differential Revision: https://reviews.llvm.org/D46102
llvm-svn: 331778
Sinking the and closer to a compare against zero is beneficial on PPC as it
allows us to emit record-form instructions. In the future, we may expand this
to a larger set of operations that feed compares against zero since PPC has
lots of record-form instructions.
Differential revision: https://reviews.llvm.org/D46060
llvm-svn: 331416
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Move veriication check for legal conversions to f128 into LowerINT_TO_FP()
and fix some indentations to match other sections of the code for readability.
llvm-svn: 330138
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
Legalize and emit code for quad-precision floating point operation xscvdpqp
and add option to guard the quad precision operation support.
Differential Revision: https://reviews.llvm.org/D44746
llvm-svn: 328558
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
I'm not entirely sure these hacks are still needed. If you remove the hacks completely, the name of the library call that gets generated doesn't match the grep the test previously had. So the test wasn't really checking anything.
If the hack is still needed it belongs in PPC specific code. I believe the FP_TO_SINT code here is the only place in the tree where a FP_ROUND_INREG node is created today. And I don't think its even being used correctly because the legalization returned a BUILD_PAIR with the same value twice. That doesn't seem right to me. By moving the code entirely to PPC we can avoid creating the FP_ROUND_INREG at all.
I replaced the grep in the existing test with full checks generated by hacking update_llc_test_check.py to support ppc32 just long enough to generate it.
Differential Revision: https://reviews.llvm.org/D44061
llvm-svn: 328017
PR35402 triggered this case. It bswap and stores a 48bit value, current STBRX optimization transforms it into STBRX. Unfortunately 48bit is not a simple MVT, there is no PPC instruction to support it, and it can't be automatically expanded by llvm, so caused a crash.
This patch detects the non-simple MVT and returns early.
Differential Revision: https://reviews.llvm.org/D44500
llvm-svn: 327651
The code checks Level == AfterLegalizeDAG which is the fourth and last of the possible DAG combine stages that we have.
There is a Level called AfterLegalVectorOps, but that's the third DAG combine and it doesn't always run.
A function called isAfterLegalVectorOps should imply it returns true in either of the DAG combines that runs after the legalize vector ops stage, but that's not what this function does.
llvm-svn: 326832
Emulated TLS is enabled by llc flag -emulated-tls,
which is passed by clang driver.
When llc is called explicitly or from other drivers like LTO,
missing -emulated-tls flag would generate wrong TLS code for targets
that supports only this mode.
Now use useEmulatedTLS() instead of Options.EmulatedTLS to decide whether
emulated TLS code should be generated.
Unit tests are modified to run with and without the -emulated-tls flag.
Differential Revision: https://reviews.llvm.org/D42999
llvm-svn: 326341
Current implementation always allocates the parameter save area conservatively
for fastcc functions. There is no reason to allocate the parameter save area if
all the parameters can be passed via registers.
Differential Revision: https://reviews.llvm.org/D42602
llvm-svn: 325581
candidates with coldcc attribute.
This recommits r322721 reverted due to sanitizer memory leak build bot failures.
Original commit message:
This patch adds support for the coldcc calling convention for Power.
This changes the set of non-volatile registers. It includes a pass to stress
test the implementation by marking all static directly called functions with
the coldcc attribute through the option -enable-coldcc-stress-test. It also
includes an option, -ppc-enable-coldcc, to add the coldcc attribute to
functions which are cold at all call sites based on BlockFrequencyInfo when
the containing function does not call any non cold functions.
Differential Revision: https://reviews.llvm.org/D38413
llvm-svn: 323778
Summary:
Fix an issue that's similar to what D41411 fixed:
float(__int128(float_var)) shouldn't be optimized to xscvdpsxds +
xscvsxdsp, as they mean (float)(int64_t)float_var.
Reviewers: jtony, hfinkel, echristo
Subscribers: sanjoy, nemanjai, hiraditya, llvm-commits, kbarton
Differential Revision: https://reviews.llvm.org/D42400
llvm-svn: 323270
candidates with coldcc attribute.
This patch adds support for the coldcc calling convention for Power.
This changes the set of non-volatile registers. It includes a pass to stress
test the implementation by marking all static directly called functions with
the coldcc attribute through the option -enable-coldcc-stress-test. It also
includes an option, -ppc-enable-coldcc, to add the coldcc attribute to
functions which are cold at all call sites based on BlockFrequencyInfo when
the containing function does not call any non cold functions.
Differential Revision: https://reviews.llvm.org/D38413
llvm-svn: 322721
Part of the fix for https://bugs.llvm.org/show_bug.cgi?id=35812.
This patch ensures that the compare operand for the atomic compare and swap
is properly zero-extended to 32 bits if applicable.
A follow-up commit will fix the extension for the SETCC node generated when
expanding an ATOMIC_CMP_SWAP_WITH_SUCCESS. That will complete the bug fix.
Differential Revision: https://reviews.llvm.org/D41856
llvm-svn: 322372
Summary:
I believe legalization is really expecting that ReplaceNodeResults will return something with the same type as the thing that's being legalized. Ultimately, it uses the output to replace the uses in the DAG so the type should match to make that work.
There are two relevant cases here. When crbits are enabled, then i1 is a legal type and getSetCCResultType should return i1. In this case, the truncate will be between i1 and i1 and should be removed (SelectionDAG::getNode does this). Otherwise, getSetCCResultType will be i32 and the legalizer will promote the truncate to be i32 -> i32 which will be similarly removed.
With this fixed we can remove some code from PromoteIntRes_SETCC that seemed to only exist to deal with the intrinsic being replaced with a larger type without changing the other operand. With the truncate being used for connectivity this doesn't happen anymore.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: nemanjai, llvm-commits, kbarton
Differential Revision: https://reviews.llvm.org/D41654
llvm-svn: 321959
If the callee and caller use different calling convensions, we cannot apply TCO if the callee requires arguments on stack; e.g. C calling convention and Fast CC use the same registers for parameter passing, but the stack offset is not necessarily same.
This patch also recommit r319218 "[PowerPC] Allow tail calls of fastcc functions from C CallingConv functions." by @sfertile since the problem reported in r320106 should be fixed.
Differential Revision: https://reviews.llvm.org/D40893
llvm-svn: 321579
The build failure was caused by an assertion in pre-legalization DAGCombine:
Combining: t6: ppcf128 = uint_to_fp t5
... into: t20: f32 = PPCISD::FCFIDUS t19
which is clearly wrong since ppcf128 are definitely different type with f32 and
we cannot change the node value type when do DAGCombine. The fix is don't
handle ppc_fp128 or i1 conversions in PPCTargetLowering::combineFPToIntToFP and
leave it to downstream to legalize it and expand it to small legal types.
Differential Revision: https://reviews.llvm.org/D41411
llvm-svn: 321276
Rather than adding more bits to express every
MMO flag you could want, just directly use the
MMO flags. Also fixes using a bunch of bool arguments to
getMemIntrinsicNode.
On AMDGPU, buffer and image intrinsics should always
have MODereferencable set, but currently there is no
way to do that directly during the initial intrinsic
lowering.
llvm-svn: 320746
Second part of https://reviews.llvm.org/D40348.
Revision r318436 has extended all constants feeding a store to 64 bits
to allow for CSE on the SDAG. However, negative constants were zero extended
which made the constant being loaded appear to be a positive value larger than
16 bits. This resulted in long sequences to materialize such constants
rather than simply a "load immediate". This patch just sign-extends those
updated constants so that they remain 16-bit signed immediates if they started
out that way.
llvm-svn: 320368
It is causing sanitizer failures on llvm tests in a bootstrapped compiler. No bot link since it's currently down, but following up to get the bot up.
This reverts commit r319218.
llvm-svn: 320106
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
This patch changes all i32 constant in store instruction to i64 with truncation, to increase the chance that the referenced constant can be shared with other i64 constant.
Differential Revision: https://reviews.llvm.org/D39352
llvm-svn: 318436
Implements TargetLowering callback 'mayBeEmittedAsTailCall' that enables
CodeGenPrepare to duplicate returns when they might enable a tail-call.
Differential Revision: https://reviews.llvm.org/D39777
llvm-svn: 318321
Move the calling convention checks for tail-call eligibility for the 64-bit
SysV ABI into a separate function. This is so that it can be shared with
'mayBeEmittedAsTailCall' in a subsequent change.
llvm-svn: 318305
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
This patch enables redundant sign- and zero-extension elimination in PowerPC MI Peephole pass.
If the input value of a sign- or zero-extension is known to be already sign- or zero-extended, the operation is redundant and can be eliminated.
One common case is sign-extensions for a method parameter or for a method return value; they must be sign- or zero-extended as defined in PPC ELF ABI.
For example of the following simple code, two extsw instructions are generated before the invocation of int_func and before the return. With this patch, both extsw are eliminated.
void int_func(int);
void ii_test(int a) {
if (a & 1) return int_func(a);
}
Such redundant sign- or zero-extensions are quite common in many programs; e.g. I observed about 60,000 occurrences of the elimination while compiling the LLVM+CLANG.
Differential Revision: https://reviews.llvm.org/D31319
llvm-svn: 315888
This is only currently used for mad/fma transforms.
This is the only case where it should be used for AMDGPU,
so add an opcode to be sure.
llvm-svn: 315740
For the medium and large code models we only need to check if a call crosses
dso-boundaries when considering tail-call elgibility.
Differential Revision: https://reviews.llvm.org/D34245
llvm-svn: 311353
We've implemented a 1-byte splat using XXSPLTISB on P9. However, LLVM will
produce a 1-byte splat even for wider element BUILD_VECTOR nodes. This patch
prevents crashing in that situation.
Differential Revision: https://reviews.llvm.org/D35650
llvm-svn: 310358
IMHO it is an antipattern to have a enum value that is Default.
At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.
This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.
llvm-svn: 309911
Power 9 has instructions to do absolute difference (VABSDUB, VABSDUH, VABSDUW)
for byte, halfword and word. We should take advantage of these.
Differential Revision: https://reviews.llvm.org/D34684
llvm-svn: 309876
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
As outlined in the PR, we didn't ensure that displacements for DQ-Form
instructions are multiples of 16. Since the instruction encoding encodes
a quad-word displacement, a sub-16 byte displacement is meaningless and
ends up being encoded incorrectly.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33671.
Differential Revision: https://reviews.llvm.org/D35007
llvm-svn: 307934
For this example:
float test (int *arr) {
return arr[2];
}
We currently generate the following code:
li r4, 8
lxsiwax f0, r3, r4
xscvsxdsp f1, f0
With this patch, we will now generate:
addi r3, r3, 8
lxsiwax f0, 0, r3
xscvsxdsp f1, f0
Originally reported in: https://bugs.llvm.org/show_bug.cgi?id=27204
Differential Revision: https://reviews.llvm.org/D35027
llvm-svn: 307553
This patch adds on to the exploitation added by https://reviews.llvm.org/D33510.
This now catches build vector nodes where the inputs are coming from sign
extended vector extract elements where the indices used by the vector extract
are not correct. We can still use the new hardware instructions by adding a
shuffle to move the elements to the correct indices. I introduced a new PPCISD
node here because adding a vector_shuffle and changing the elements of the
vector_extracts was getting undone by another DAG combine.
Commit on behalf of Zaara Syeda (syzaara@ca.ibm.com)
Differential Revision: https://reviews.llvm.org/D34009
llvm-svn: 307169
David Tenty