In addition to memory behavior attributes (readonly/writeonly) we now
derive memory location attributes (argmemonly/inaccessiblememonly/...).
The former is part of AAMemoryBehavior and the latter part of
AAMemoryLocation. While they are similar in nature it got messy when
they were put in a single AA. Location attributes for arguments and
floating values will follow later.
Note that both memory attributes kinds can derive readnone. If there are
no accesses AAMemoryBehavior will derive readnone. If there are accesses
but only to stack (=local) locations AAMemoryLocation will derive
readnone.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D73426
Due to the genericValueTraversal we might visit values for which we did
not create an AAValueConstantRange object, e.g., as they are behind a
PHI or select or call with `returned` argument. As a consequence we need
to validate the types as we are about to query AAValueConstantRange for
operands.
Summary:
Potential fix for: https://bugs.llvm.org/show_bug.cgi?id=44889 and https://bugs.llvm.org/show_bug.cgi?id=44408
In the legacy pass manager, loop rotate need not compute MemorySSA when not being in the same loop pass manager with other loop passes.
There isn't currently a way to differentiate between the two cases, so this attempts to limit the usage in LoopRotate to only update MemorySSA when the analysis is already available.
The side-effect of this is that it will split the Loop pipeline.
This issue does not apply to the new pass manager, where we have a flag specifying if all loop passes in that loop pass manager preserve MemorySSA.
Reviewers: dmgreen, fedor.sergeev, nikic
Subscribers: Prazek, hiraditya, george.burgess.iv, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74574
replaceDbgDeclare is used to update the descriptions of stack variables
when they are moved (e.g. by ASan or SafeStack). A side effect of
replaceDbgDeclare is that it moves dbg.declares around in the
instruction stream (typically by hoisting them into the entry block).
This behavior was introduced in llvm/r227544 to fix an assertion failure
(llvm.org/PR22386), but no longer appears to be necessary.
Hoisting a dbg.declare generally does not create problems. Usually,
dbg.declare either describes an argument or an alloca in the entry
block, and backends have special handling to emit locations for these.
In optimized builds, LowerDbgDeclare places dbg.values in the right
spots regardless of where the dbg.declare is. And no one uses
replaceDbgDeclare to handle things like VLAs.
However, there doesn't seem to be a positive case for moving
dbg.declares around anymore, and this reordering can get in the way of
understanding other bugs. I propose getting rid of it.
Testing: stage2 RelWithDebInfo sanitized build, check-llvm
rdar://59397340
Differential Revision: https://reviews.llvm.org/D74517
binop (extelt X, C), (extelt Y, C) --> extelt (binop X, Y), C
This is a transform that has been considered for canonicalization (instcombine)
in the past because it reduces instruction count. But as shown in the x86 tests,
it's impossible to know if it's profitable without a cost model. There are many
potential target constraints to consider.
We have implemented similar transforms in the backend (DAGCombiner and
target-specific), but I don't think we have this exact fold there either (and if
we did it in SDAG, it wouldn't work across blocks).
Note: this patch was intended to handle the more general case where the extract
indexes do not match, but it got too big, so I scaled it back to this pattern
for now.
Differential Revision: https://reviews.llvm.org/D74495
This reverts commit 61b35e4111.
This commit causes a timeout in chromium builds; likely to have a
similar cause to the previous timeout issue caused by this commit (see
6ded69f294 for more details). It is possible that there is no way to
fix this bug that will not cause this issue; further investigations as
to the efficiency of handling large amounts of debug info will be
necessary.
Reapply 8a56d64d76 with minor fixes.
The problem was that cancellation can cause new edges to the parallel
region exit block which is not outlined. The CodeExtractor will encode
the information which "exit" was taken as a return value. The fix is to
ensure we do not return any value from the outlined function, to prevent
control to value conversion we ensure a single exit block for the
outlined region.
This reverts commit 3aac953afa.
In order to fix PR44560 and to prepare for loop transformations we now
finalize a function late, which will also do the outlining late. The
logic is as before but the actual outlining step happens now after the
function was fully constructed. Once we have loop transformations we
can apply them in the finalize step before the outlining.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D74372
We used coarse-grained liveness before, thus we looked if the
instruction was executed, but we did not use fine-grained liveness,
hence if the instruction was needed or could be deleted even if the
surrounding ones are live. This patches introduces this level of
liveness checks together with other liveness queries, e.g., for uses.
For more control we enforce that all liveness queries go through the
Attributor.
Test have been adjusted to reflect the changes or augmented to prevent
deletion of the parts we want to check.
Reviewed By: sstefan1
Differential Revision: https://reviews.llvm.org/D73313
If we have a replacement for a value, via AAValueSimplify, the original
value will lose all its uses. Thus, as long as a value is simplified we
can skip the uses in checkForAllUses, given that these uses are
transitive uses for the simplified version and will therefore affect the
simplified version as necessary.
Since this allowed us to remove calls without side-effects and a known
return value, we need to make sure not to eliminate `musttail` calls.
Those we keep around, or later remove the entire `musttail` call chain.
We relied on wouldInstructionBeTriviallyDead before but that functions
does not take assumed information, especially for calls, into account.
The replacement, AAIsDead::isAssumeSideEffectFree, does.
This change makes AAIsDeadCallSiteReturn more complex as we can have
a dead call or only dead users.
The test have been modified to include a side effect where there was
none in order to keep the coverage.
Reviewed By: sstefan1
Differential Revision: https://reviews.llvm.org/D73311
Various parts of the LLVM code generator assume that the address
argument of a dbg.declare is not a `ptrtoint`-of-alloca. ASan breaks
this assumption, and this results in local variables sometimes being
unavailable at -O0.
GlobalISel, SelectionDAG, and FastISel all do not appear to expect
dbg.declares to have a `ptrtoint` as an operand. This means that they do
not place entry block allocas in the usual side table reserved for local
variables available in the whole function scope. This isn't always a
problem, as LLVM can try to lower the dbg.declare to a DBG_VALUE, but
those DBG_VALUEs can get dropped for all the usual reasons DBG_VALUEs
get dropped. In the ObjC test case I'm looking at, the cause happens to
be that `replaceDbgDeclare` has hoisted dbg.declares into the entry
block, causing LiveDebugValues to "kill" the DBG_VALUEs because the
lexical dominance check fails.
To address this, I propose:
1) Have ASan (always) pass an alloca to dbg.declares (this patch). This
is a narrow bugfix for -O0 debugging.
2) Make replaceDbgDeclare not move dbg.declares around. This should be a
generic improvement for optimized debug info, as it would prevent the
lexical dominance check in LiveDebugValues from killing as many
variables.
This means reverting llvm/r227544, which fixed an assertion failure
(llvm.org/PR22386) but no longer seems to be necessary. I was able to
complete a stage2 build with the revert in place.
rdar://54688991
Differential Revision: https://reviews.llvm.org/D74369
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
This version includes a fix for a set of crashes caused by marking
values depending on a yet unknown & tracked call as overdefined.
In some cases, we would later discover that the call has a constant
result and try to mark a user of it as constant, although it was already
marked as overdefined. Most instruction handlers bail out early if the
instruction is already overdefined. But that is not necessary for
CastInsts for example. By skipping values that depend on skipped
calls, we resolve the crashes and also improve the precision in some
cases (see resolvedundefsin-tracked-fn.ll).
Note that we may not skip PHI nodes that may depend on a skipped call,
but they can be safely marked as overdefined, as we bail out early if
the PHI node is overdefined.
This reverts the revert commit
a74b31a3e9cd844c7ce2087978568e3f5ec8519.
Summary:
Passes ORE, BPI, BFI are not being preserved by Loop passes, hence it
is incorrect to retrieve these passes as cached.
This patch makes the loop passes in question compute a new instance.
In some of these cases, however, it may be beneficial to change the Loop pass to
a Function pass instead, similar to the change for LoopUnrollAndJam.
Reviewers: chandlerc, dmgreen, jdoerfert, reames
Subscribers: mehdi_amini, hiraditya, zzheng, steven_wu, dexonsmith, Whitney, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72891
This reverts commit 636c93ed11.
The original patch caused build failures on TSan buildbots. Commit 6ded69f294
fixes this issue by reducing the rate at which empty debug intrinsics
propagate, reducing the memory footprint and preventing a fatal spike.
This patch is a fix following the revert of 72ce759
(https://reviews.llvm.org/rG72ce759928e6dfee6a9efa310b966c19722352ba)
and fixes the failure that it caused.
The above patch failed on the Thread Sanitizer buildbot with an out of
memory error. After an investigation, the cause was identified as an
explosion in debug intrinsics while running the Jump Threading pass on
ModuleMap.ll. The above patched prevented debug intrinsics from being
dropped when their Basic Block was deleted due to being "empty". In this
case, one of the functions in ModuleMap.ll had (after many optimization
passes) a very large number of debug intrinsics representing a set of
repeatedly inlined variables. Previously the vast majority of these were
silently dropped during Jump Threading when their blocks were deleted,
but as of the above patch they survived for longer, causing a large
increase in the number of debug intrinsics. These intrinsics were then
repeatedly cloned by the Jump Threading pass as edges were threaded,
multiplying the intrinsic count further. The memory consumed by this
process spiralled out of control, crashing the buildbot that uses TSan
(which has an estimated 5-10x memory overhead compared to non-sanitized
builds).
This patch adds RemoveRedundantDbgInstrs to the Jump Threading pass, in
order to reduce the number of debug intrinsics down to a manageable
amount in cases where many intrinsics for the same variable end up
bunched together contiguously, as in this case.
Differential Revision: https://reviews.llvm.org/D73054
This causes a crash for the reproducer below
enum { a };
enum b { c, d };
e;
static _Bool g(struct f *h, enum b i) {
i &&j();
return a;
}
static k(char h, enum b i) {
_Bool l = g(e, i);
l;
}
m(h) {
k(h, c);
g(h, d);
}
This reverts commit aadb635e04.
This is apparently worse than 1-byte alignment. This does not attempt
to decompose 2-byte aligned wide stores, but will stop trying to
produce them.
Also fix bug in LoadStoreVectorizer which was decreasing the alignment
and vectorizing stack accesses. It was assuming a stack object was an
alloca that could have its base alignment changed, which is not true
if the pointer is derived from a function argument.
As an approximation to a dead edge we can check if the terminator is
dead. If so, the corresponding operand use in a PHI node is dead even if
the PHI node itself is not.
This restores commit 748bb5a0f1, along
with a fix for a Chromium test suite build issue (and a new test for
that case).
Differential Revision: https://reviews.llvm.org/D73242
The changeXXXAfterManifest functions are better suited to deal with
changes so we should prefer them. These functions also recursively
delete dead instructions which is why we see test changes.
This is a followup to D73803, which uses the replaceOperand()
helper in more places.
This should be NFC apart from changes to worklist order.
Differential Revision: https://reviews.llvm.org/D73919
This patch removes forcedconstant to simplify things for the
move to ValueLattice, which includes constant ranges, but no
forced constants.
This patch removes forcedconstant and changes ResolvedUndefsIn
to mark instructions with unknown operands as overdefined. This
means we do not do simplifications based on undef directly in SCCP
any longer, but this seems to hardly come up in practice (see stats
below), presumably because InstCombine & others take care
of most of the relevant folds already.
It is still beneficial to keep ResolvedUndefIn, as it allows us delaying
going to overdefined until we propagated all known information.
I also built MultiSource, SPEC2000 and SPEC2006 and compared
sccp.IPNumInstRemoved and sccp.NumInstRemoved. It looks like the impact
is quite low:
Tests: 244
Same hash: 238 (filtered out)
Remaining: 6
Metric: sccp.IPNumInstRemoved
Program base patch diff
test-suite...arks/VersaBench/dbms/dbms.test 4.00 3.00 -25.0%
test-suite...TimberWolfMC/timberwolfmc.test 38.00 34.00 -10.5%
test-suite...006/453.povray/453.povray.test 158.00 155.00 -1.9%
test-suite.../CINT2000/176.gcc/176.gcc.test 668.00 668.00 0.0%
test-suite.../CINT2006/403.gcc/403.gcc.test 1209.00 1209.00 0.0%
test-suite...arks/mafft/pairlocalalign.test 76.00 76.00 0.0%
Tests: 244
Same hash: 238 (filtered out)
Remaining: 6
Metric: sccp.NumInstRemoved
Program base patch diff
test-suite...arks/mafft/pairlocalalign.test 185.00 175.00 -5.4%
test-suite.../CINT2006/403.gcc/403.gcc.test 2059.00 2056.00 -0.1%
test-suite.../CINT2000/176.gcc/176.gcc.test 2358.00 2357.00 -0.0%
test-suite...006/453.povray/453.povray.test 317.00 317.00 0.0%
test-suite...TimberWolfMC/timberwolfmc.test 12.00 12.00 0.0%
Reviewers: davide, efriedma, mssimpso
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D61314
This reverts commit d0c4d4fe09.
Revert "[DSE,MSSA] Move more passing test cases from todo to simple.ll."
This reverts commit 02266e64bb.
Revert "[DSE,MSSA] Adjust mda-with-dbg-values.ll to MSSA backed DSE."
This reverts commit 74f03e4ff0.
The variable was added to the initial commit via copy/paste of existing
code, but it wasn't actually used in the code. We can add it back with
the proper usage if/when that is needed.
As discussed in PR41083:
https://bugs.llvm.org/show_bug.cgi?id=41083
...we can assert/crash in EarlyCSE using the current hashing scheme and
instructions with flags.
ValueTracking's matchSelectPattern() may rely on overflow (nsw, etc) or
other flags when detecting patterns such as min/max/abs composed of
compare+select. But the value numbering / hashing mechanism used by
EarlyCSE intersects those flags to allow more CSE.
Several alternatives to solve this are discussed in the bug report.
This patch avoids the issue by doing simple matching of min/max/abs
patterns that never requires instruction flags. We give up some CSE
power because of that, but that is not expected to result in much
actual performance difference because InstCombine will canonicalize
these patterns when possible. It even has this comment for abs/nabs:
/// Canonicalize all these variants to 1 pattern.
/// This makes CSE more likely.
(And this patch adds PhaseOrdering tests to verify that the expected
transforms are still happening in the standard optimization pipelines.
I left this code to use ValueTracking's "flavor" enum values, so we
don't have to change the callers' code. If we decide to go back to
using the ValueTracking call (by changing the hashing algorithm
instead), it should be obvious how to replace this chunk.
Differential Revision: https://reviews.llvm.org/D74285
Summary: It attempts to devirtualize a call on alloca through vtable loads.
Reviewers: davidxl
Subscribers: mgorny, Prazek, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71308
We were checking for extra uses of the negated operand even
if we were not going to create it as part of this canonicalization.
This was showing up as a regression when we limit EarlyCSE as
proposed in D74285.
This reverts commit b54a8ec1bc.
The commit triggered debug invariance (different output with/without
-g). The patch seems to have exposed a pre-existing invariance problem
in GlobalOpt, which I'll write a bug report for.
This patch adds a first version of a MemorySSA based DSE. It is missing
a lot of features, which will get added as follow-ups, to help to keep
the review manageable.
The patch uses the following general approach: given a MemoryDef, walk
upwards to find clobbering MemoryDefs that may be killed by the
starting def. Then check that there are no uses that may read the
location of the original MemoryDef in between both MemoryDefs. A bit
more concretely:
For all MemoryDefs StartDef:
1. Get the next dominating clobbering MemoryDef (DomAccess) by walking upwards.
2. Check that there no reads between DomAccess and the StartDef by checking
all uses starting at DomAccess and walking until we see StartDef.
3. For each found DomDef, check that:
1. There are no barrier instructions between DomDef and StartDef (like
throws or stores with ordering constraints).
2. StartDef is executed whenever DomDef is executed.
3. StartDef completely overwrites DomDef.
4. Erase DomDef from the function and MemorySSA.
The patch uses a very simple approach to guarantee that no throwing
instructions are between 2 stores: We only allow accesses to stack
objects, access that are in the same basic block if the block does not
contain any throwing instructions or accesses in functions that do
not contain any throwing instructions. This will get lifted later.
Besides adding support for the missing cases, there is plenty of additional
potential for improvements as follow-up work, e.g. the way we visit stores
(could be just a traversal of the MemorySSA, rather than collecting them
up-front), using the alias information discovered during walking to optimize
the MemorySSA.
This is loosely based on D40480 by Dave Green.
Reviewers: dmgreen, rnk, efriedma, bryant, asbirlea, Tyker
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D72700
This copies the DSE tests into a MSSA subdirectory to test the MemorySSA
backed DSE implementation, without disturbing the original tests.
Differential Revision: https://reviews.llvm.org/D72145
This is a minimal but important advancement over the existing code. A
cast with an operand that is only used in the cast retains the no-alias
property of the operand.
Traversing PHI nodes is natural with the genericValueTraversal but also
a bit tricky. The problem is similar to the ones we have seen in AAAlign
and AADereferenceable, namely that we continue to increase the range in
each iteration. We use a pessimistic approach here to stop the
iterations. Nevertheless, optimistic information can now be propagated
through a PHI node.
The change is performed as stated by the FIXME and the tests are
adjusted. All changes look fine to me and values can be inferred as
undef without it being an error.
Casts can be handled natively by the ConstantRange class. We do limit it
to extends for now as we assume an integer type in different locations.
A TODO and a test case with a FIXME was added to remove that restriction
in the future.
We have several bug reports that could be characterized as "reducing scalarization",
and this topic was also raised on llvm-dev recently:
http://lists.llvm.org/pipermail/llvm-dev/2020-January/138157.html
...so I'm proposing that we deal with these patterns in a new, lightweight IR vector
pass that runs before/after other vectorization passes.
There are 4 alternate options that I can think of to deal with this kind of problem
(and we've seen various attempts at all of these), but they all have flaws:
InstCombine - can't happen without TTI, but we don't want target-specific
folds there.
SDAG - too late to assist other vectorization passes; TLI is not equipped
for these kind of cost queries; limited to a single basic block.
CGP - too late to assist other vectorization passes; would need to re-implement
basic cleanups like CSE/instcombine.
SLP - doesn't fit with existing transforms; limited to a single basic block.
This initial patch/transform is based on existing code in AggressiveInstCombine:
we walk backwards through the function looking for a pattern match. But we diverge
from that cost-independent IR canonicalization pass by using TTI to decide if the
vector alternative is profitable.
We probably have at least 10 similar bug reports/patterns (binops, constants,
inserts, cheap shuffles, etc) that would fit in this pass as follow-up enhancements.
It's possible that we could iterate on a worklist to fix-point like InstCombine does,
but it's safer to start with a most basic case and evolve from there, so I didn't
try to do anything fancy with this initial implementation.
Differential Revision: https://reviews.llvm.org/D73480
The LoopExtractor created new functions (by definition), which violates
the restrictions of a LoopPass.
The correct implementation of this pass should be as a ModulePass.
Includes reverting rL82990 implications on the LoopExtractor.
Fixes PR3082 and PR8929.
Differential Revision: https://reviews.llvm.org/D69069
In addition to the module pass, this patch introduces a CGSCC pass that
runs the Attributor on a strongly connected component of the call graph
(both old and new PM). The Attributor was always design to be used on a
subset of functions which makes this patch mostly mechanical.
The one change is that we give up `norecurse` deduction in the module
pass in favor of doing it during the CGSCC pass. This makes the
interfaces simpler but can be revisited if needed.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D70767
Parallel regions known to be read-only, e.g., after we removed all dead
write accesses, and terminating (`willreturn`) can be removed.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D69954
This adds ~27 more runtime calls to the OpenMPKinds.def file, all with
attributes. We deduplicate 16 of those automatically in function =
thread scope. And we annotate all of them automatically during the
OpenMPOpt discovery step. A test with all omp_XXXX runtime calls to
track annotation coverage is included.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D69984
The OpenMPOpt pass is a CGSCC pass in which OpenMP specific
optimizations can reside.
The OpenMPOpt pass uses the OpenMPKinds.def file to identify runtime
calls and their uses. This allows targeted transformations and eases
their implementation.
This initial patch deduplicates `__kmpc_global_thread_num` and
`omp_get_thread_num` calls. We can also identify arguments that are
equivalent to such a call result and use it instead. Later we can
determine "gtid" arguments based on the use in kernel functions etc.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D69930
The CallGraphUpdater is a helper that simplifies the process of updating
the call graph, both old and new style, while running an CGSCC pass.
The uses are contained in different commits, e.g. D70767.
More functionality is added as we need it.
Reviewed By: modocache, hfinkel
Differential Revision: https://reviews.llvm.org/D70927
Bionic has had `__strlen_chk` for a while. Optimizing that into a
constant is quite profitable, when possible.
Differential Revision: https://reviews.llvm.org/D74079
While D72944 also fixes https://bugs.llvm.org/show_bug.cgi?id=44541,
it does so in a more roundabout manner and there might be other
loopholes to trigger the same issue. This is a more direct fix,
that prevents the transform if the min/max is based on a
non-canonical sub X, 0 instruction.
Differential Revision: https://reviews.llvm.org/D73849
As discussed on D73919, this replaces a few cases where we were
modifying multiple operands of instructions in-place with the
creation of a new instruction, which we generally prefer nowadays.
This tends to be more readable and less prone to worklist management
bugs.
Test changes are only superficial (instruction naming and order).
Fixes https://bugs.llvm.org/show_bug.cgi?id=44835. Skip the transform
if it wouldn't actually do anything (apart from removing and reinserting
the same instructions).
Note that the test case doesn't loop on current master anymore, only
on the LLVM 10 release branch. The issue is already mitigated on master
due to worklist order fixes, but we should fix the root cause there as well.
As a side note, we should probably assert in combineLoadToNewType()
that it does not combine to the same type. Not doing this here, because
this assertion would also be triggered in another place right now.
Differential Revision: https://reviews.llvm.org/D74278
This improves on the following patch, which removed ARC runtime calls
taking inert global variables:
https://reviews.llvm.org/D62433
rdar://problem/59137105
Summary:
This enables it for large working set size cases only.
This does not enable it under sample PGO.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74073
IRCE pass checks that it can calculate loop bounds by checking
SCEV availability at loop entry. However it is possible that loop
bound SCEV is loop invariant, but instruction used to compute it
resides within loop. In such case adjusting loop bound in preheader
using IRBuilder leads to malformed SSA.
Use SCEVExpander instead to generate proper instructions.
Reviewed-by: mkazantsev
Differential Revision: https://reviews.llvm.org/D73496
Summary: This patch fixes https://bugs.llvm.org/show_bug.cgi?id=44388 which incorrectly assigns an ABI alignment to memset when there was no explicit alignment given.
Reviewers: gchatelet, lenary, nikic
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74083
Summary:
Tune the profile threshold flag value for instrumentation PGO based on internal
benchmarks.
Also, add flags to allow profile guided size optimizations for non-cold code
to be enabled separately for instrumentation and sample PGSO.
Neither changes the default behavior (yet) as it's disabled for non-cold code.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72937
This reverts commit 41784bed01.
Since the original revision ead815924e,
this revision fixes three issues:
- This revision fixes the Windows build. My original patch improperly
copied EH pads on Windows. This patch disregards jump threading
opportunities having to do with EH pads.
- This revision fixes jump threading to a wrong destination.
Specifically, my original patch treated any Constant other than 0 as 1
while evaluating the branch condition. This bug led to treating
constant expressions like:
icmp ugt i8* null, inttoptr (i64 4 to i8*)
to "true". This patch fixes the bug by calling isOneValue.
- This revision fixes the cost calculation of two basic blocks being
threaded through. Note that getJumpThreadDuplicationCost returns
"(unsigned)~0" for those basic blocks that cannot be duplicated. If
we sum of two return values from getJumpThreadDuplicationCost, we
could have an unsigned overflow like:
(unsigned)~0 + 5 = 4
and mistakenly determine that it's safe and profitable to proceed
with the jump threading opportunity. The patch fixes the bug by
checking each return value before summing them up.
[JumpThreading] Thread jumps through two basic blocks
Summary:
This patch teaches JumpThreading.cpp to thread through two basic
blocks like:
bb3:
%var = phi i32* [ null, %bb1 ], [ @a, %bb2 ]
%tobool = icmp eq i32 %cond, 0
br i1 %tobool, label %bb4, label ...
bb4:
%cmp = icmp eq i32* %var, null
br i1 %cmp, label bb5, label bb6
by duplicating basic blocks like bb3 above. Once we duplicate bb3 as
bb3.dup and redirect edge bb2->bb3 to bb2->bb3.dup, we have:
bb3:
%var = phi i32* [ @a, %bb2 ]
%tobool = icmp eq i32 %cond, 0
br i1 %tobool, label %bb4, label ...
bb3.dup:
%var = phi i32* [ null, %bb1 ]
%tobool = icmp eq i32 %cond, 0
br i1 %tobool, label %bb4, label ...
bb4:
%cmp = icmp eq i32* %var, null
br i1 %cmp, label bb5, label bb6
Then the existing code in JumpThreading.cpp can thread edge
bb3.dup->bb4 through bb4 and eventually create bb3.dup->bb5.
Reviewers: wmi
Subscribers: hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70247
Summary:
Currently type test assume sequences inserted for devirtualization are
removed during WPD. This patch delays their removal until later in the
optimization pipeline. This is an enabler for upcoming enhancements to
indirect call promotion, for example streamlined promotion guard
sequences that compare against vtable address instead of the target
function, when there are small number of possible vtables (either
determined via WPD or by in-progress type profiling). We need the type
tests to correlate the callsites with the address point offset needed in
the compare sequence, and optionally to associated type summary info
computed during WPD.
This depends on work in D71913 to enable invocation of LowerTypeTests to
drop type test assume sequences, which will now be invoked following ICP
in the ThinLTO post-LTO link pipelines, and also after the existing
export phase LowerTypeTests invocation in regular LTO (which is already
after ICP). We cannot simply move the existing import phase
LowerTypeTests pass later in the ThinLTO post link pipelines, as the
comment in PassBuilder.cpp notes (it must run early because when
performing CFI other passes may disturb the sequences it looks for).
This necessitated adding a new type test resolution "Unknown" that we
can use on the type test assume sequences previously removed by WPD,
that we now want LTT to ignore.
Depends on D71913.
Reviewers: pcc, evgeny777
Subscribers: mehdi_amini, Prazek, hiraditya, steven_wu, dexonsmith, arphaman, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73242
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
This is a bug noted in the recent D72733 and seen
in the similar transform just above the changed source code.
I added tests with illegal types and zexts to show the bug -
we could transform legal phi ops to illegal, etc. I did not add
tests with trunc because we won't see any diffs on those patterns.
That is because InstCombiner::SliceUpIllegalIntegerPHI() appears to
do those transforms independently of datalayout. It can also create
more casts than are present in existing code.
There are some existing regression tests that do not include a
datalayout that would be altered by this fix. I assumed that the
lack of a datalayout in those regression files is an oversight, so
I added the minimal layout (make i32 legal) necessary to preserve
behavior on those tests.
Differential Revision: https://reviews.llvm.org/D73907
Adds the global (cl::opt) GVNOption enable-load-in-loop-pre in order
to control whether the optimization will be performed if the load
is part of a loop.
Patch by Hendrik Greving!
Differential Revision: https://reviews.llvm.org/D73804
Summary:
Method appendLoopsToWorklist is duplicate in LoopUnroll and in the
LoopPassManager as an internal method. Make it an utility.
Reviewers: dmgreen, chandlerc, fedor.sergeev, yamauchi
Subscribers: mehdi_amini, hiraditya, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73569
Adds a replaceOperand() helper, which is like Instruction.setOperand()
but adds the old operand to the worklist. This reduces the amount of
missing or incorrect worklist management.
This only applies the helper to a relatively small subset of
setOperand() calls in InstCombine, namely those of the pattern
`I.setOperand(); return &I;`, where it is most obviously applicable.
Differential Revision: https://reviews.llvm.org/D73803
This renames Worklist.AddDeferred() to Worklist.add() and
Worklist.Add() to Worklist.push(). The intention here is that
Worklist.add() should be the go-to method for explicit worklist
management, while the raw Worklist.push() is mostly for
InstCombine internals. I will then migrate uses of Worklist.push()
to Worklist.add() in followup changes.
As suggested by spatel on D73411 I'm also changing the remaining
method names to lowercase first character, in line with current
coding standards.
Differential Revision: https://reviews.llvm.org/D73745
Summary:
A recent change to enable more importing of global variables with
references exposed some efficiency issues with export computation.
See D73724 for more information and detailed analysis.
The first was specific to variable importing. The code was marking every
copy of a referenced value (from possibly thousands of files in the case
of linkonce_odr) as exported, and we only need to mark the copy in the
module containing the variable def being imported as exported. The
reason is that this is tracking what values are newly exported as a
result of importing. Anything that was defined in another module and
simply used in the exporting module is already exported, and would have
been identified by the caller (e.g. the LTO API implementations).
The second issue is that the code was re-adding previously exported
values (along with all references). It is easy to identify when a
variable was already imported into the same module (via the
import list insert call return value), and we already did this for
function importing. However, what we weren't doing for either function
or variable importing was avoiding a re-insertion when it was previously
exported into a different importing module. The reason we couldn't do
this is there was no way of telling from the export list whether it was
previously inserted there because its definition was exported (in which
case we already marked all its references as exported) from when it was
inserted there because it was referenced by another exported value (in
which case we haven't yet inserted its own references).
To address this we can restructure the way the export list is
constructed. This patch only adds the actual imported definitions
(variable or function) to the export list for its module during the
import computation. After import computation is complete, where we were
already post-processing the export list we go ahead and add all
references made by those exported values to the export list.
These changes speed up the thin link not only with constant variable
importing enabled, but also without (due to the efficiency improvement
in function importing).
Some thin link user time measurements for one large application, average
of 5 runs:
With constant variable importing enabled:
- without this patch: 479.5s
- with this patch: 74.6s
Without constant variable importing enabled:
- without this patch: 80.6s
- with this patch: 70.3s
Note I have not re-enabled constant variable importing here, as I would
like to do additional compile time measurements with these fixes first.
Reviewers: evgeny777
Subscribers: mehdi_amini, inglorion, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73851
bo (splat X), (bo Y, OtherOp) --> bo (splat (bo X, Y)), OtherOp
This patch depends on the splat analysis enhancement in D73549.
See the test with comment:
; Negative test - mismatched splat elements
...as the motivation for that first patch.
The motivating case for reassociating splatted ops is shown in PR42174:
https://bugs.llvm.org/show_bug.cgi?id=42174
In that example, a slight change in order-of-associative math results
in a big difference in IR and codegen. This patch gets all of the
unnecessary shuffles out of the way, but doesn't address the potential
scalarization (see D50992 or D73480 for that).
Differential Revision: https://reviews.llvm.org/D73703
Duplicating instructions can lead to code size increases but using
a threshold of 3 is good for reducing code size.
Differential Revision: https://reviews.llvm.org/D72916
If all call sites are in `norecurse` functions we can derive `norecurse`
as the ReversePostOrderFunctionAttrsPass does. This should make
ReversePostOrderFunctionAttrsLegacyPass obsolete once the Attributor is
enabled.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D72017
If we know that all call sites have been processed we can derive an
early fixpoint. The use in this patch is likely not to trigger right now
but a follow up patch will make use of it.
Reviewed By: uenoku, baziotis
Differential Revision: https://reviews.llvm.org/D72016
If we had `noalias` on an argument the inliner created alias scope
metadata already. However, the call site `noalias` annotation was not
considered. Since the Attributor can derive such call site `noalias`
annotation we should treat them the same as argument annotations.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D73528
Fix attempt
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Some code gen passes use MBFIWrapper to keep track of the frequency of new
blocks. This was not taken into account and could lead to incorrect frequencies
as MBFI silently returns zero frequency for unknown/new blocks.
Add a variant for MBFIWrapper in the PGSO query interface.
Depends on D73494.
We may calculate reassociable math ops in arbitrary order when creating a shuffle reduction,
so there's no guarantee that things like 'nsw' hold on those intermediate values. Drop all
poison-generating flags for safety.
This change is limited to shuffle reductions because I don't think we have a problem in the
general case (where we intersect flags of each scalar op that goes into a vector op), but if
there's evidence of other cases being wrong, we can extend this fix to cover those cases.
https://bugs.llvm.org/show_bug.cgi?id=44536
Differential Revision: https://reviews.llvm.org/D73727
In line with current conventions, create new instructions rather
than modify two operands in place and performing manual worklist
management.
This should be NFC apart from possible worklist order changes.
from FC0.ExitBlock to FC1.ExitBlock when proven safe.
Summary:
Currently LoopFusion give up when the second loop nest guard
block or the first loop nest exit block is not empty. For example:
if (0 < N) {
for (int i = 0; i < N; ++i) {}
x+=1;
}
y+=1;
if (0 < N) {
for (int i = 0; i < N; ++i) {}
}
The above example should be safe to fuse.
This PR moves instructions in FC1 guard block (e.g. y+=1;) to
FC0 guard block, or instructions in FC0 exit block (e.g. x+=1;) to
FC1 exit block, which then LoopFusion is able to fuse them.
Reviewer: kbarton, jdoerfert, Meinersbur, dmgreen, fhahn, hfinkel,
bmahjour, etiotto
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D73641
Summary:
When constant folding, constants that are wrapped in metadata were not
folded. This could lead to dbg.values being the only user of a constant
expression, due to the non-dbg uses having been rewritten, resulting in
the constant later on being removed by some other pass. This occurred
with the attached test case, in which the non-rewritten GEP in the
dbg.value intrinsic was later on removed by globalopt.
This patch makes the code look through metadata and fold such constants.
I guess that we in the future may want to allow dbg.values using GEPs and
other constant expressions to be emittable even if there are no non-dbg
uses, but for example SelectionDAG does not support that.
Reviewers: jmorse, aprantl, vsk, davide
Reviewed By: aprantl, vsk, davide
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D73630
Summary:
Add trimming of unused components of s_buffer_load.
For s_buffer_load and unformatted buffer_load also trim unused
components at the beginning of vector and update offset accordingly.
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71785
Summary:
In a release build this variable becomes unused and may break the build
with `-Werror,-Wunused-variable`.
Reviewers: gribozavr2, jdoerfert, sstefan1
Reviewed By: gribozavr2
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73683
InstCombine operates on the basic premise that the operands of the
currently processed instruction have already been simplified. It
achieves this by pushing instructions to the worklist in reverse
program order, so that instructions are popped off in program order.
The worklist management in the main combining loop also makes sure
to uphold this invariant.
However, the same is not true for all the code that is performing
manual worklist management. The largest problem (addressed in this
patch) are instructions inserted by InstCombine's IRBuilder. These
will be pushed onto the worklist in order of insertion (generally
matching program order), which means that a) the users of the
original instruction will be visited first, as they are pushed later
in the main loop and b) the newly inserted instructions will be
visited in reverse program order.
This causes a number of problems: First, folds operate on instructions
that have not had their operands simplified, which may result in
optimizations being missed (ran into this in
https://reviews.llvm.org/D72048#1800424, which was the original
motivation for this patch). Additionally, this increases the amount
of folds InstCombine has to perform, both within one iteration, and
by increasing the number of total iterations.
This patch addresses the issue by adding a Worklist.AddDeferred()
method, which is used for instructions inserted by IRBuilder. These
will only be added to the real worklist after the combine finished,
and in reverse order, so they will end up processed in program order.
I should note that the same should also be done to nearly all other
uses of Worklist.Add(), but I'm starting with just this occurrence,
which has by far the largest test fallout.
Most of the test changes are due to
https://bugs.llvm.org/show_bug.cgi?id=44521 or other cases where
we don't canonicalize something. These are neutral. One regression
has been addressed in D73575 and D73647. The remaining regression
in an shl+sdiv fold can't really be fixed without dropping another
transform, but does not seem particularly problematic in the first
place.
Differential Revision: https://reviews.llvm.org/D73411
Summary:
This patch makes sure that the field VFShape.VF is greater than zero
when demangling the vector function name of scalable vector functions
encoded in the "vector-function-abi-variant" attribute.
This change is required to be able to provide instances of VFShape
that can be used to query the VFDatabase for the vectorization passes,
as such passes always require a positive value for the Vectorization Factor (VF)
needed by the vectorization process.
It is not possible to extract the value of VFShape.VF from the mangled
name of scalable vector functions, because it is encoded as
`x`. Therefore, the VFABI demangling function has been modified to
extract such information from the IR declaration of the vector
function, under the assumption that _all_ vectors in the signature of
the vector function have the same number of lanes. Such assumption is
valid because it is also assumed by the Vector Function ABI
specifications supported by the demangling function (x86, AArch64, and
LLVM internal one).
The unit tests that demangle scalable names have been modified by
adding the IR module that carries the declaration of the vector
function name being demangled.
In particular, the demangling function fails in the following cases:
1. When the declaration of the scalable vector function is not
present in the module.
2. When the value of VFSHape.VF is not greater than 0.
Reviewers: jdoerfert, sdesmalen, andwar
Reviewed By: jdoerfert
Subscribers: mgorny, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73286
A pointer is privatizeable if it can be replaced by a new, private one.
Privatizing pointer reduces the use count, interaction between unrelated
code parts. This is a first step towards replacing argument promotion.
While we can already handle recursion (unlike argument promotion!) we
are restricted to stack allocations for now because we do not analyze
the uses in the callee.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D68852
The helpers AAReturnedFromReturnedValues and
AACallSiteReturnedFromReturned are useful not only to avoid code
duplication but also to avoid recomputation of results. If we have N
call sites we should not recompute the function return information N
times but once. These are mostly straightforward usages with some minor
improvements on the helpers and addition of a new one
(IRPosition::getAssociatedType) that knows about function return types.
For the
icmp eq (add X, C1), C2 => icmp eq X, C2-C1
icmp eq (sub C1, X), C2 => icmp eq X, C1-C2
folds, this allows C1 to be non-splat and contain undefs.
C2 is still splat, due to the structure of the code.
This is to address the remaining part of the regression in D73411,
where demanded element analysis replaces some elements with undef.
Differential Revision: https://reviews.llvm.org/D73647
This commit fixes PR39321.
GlobalExtensions is not guaranteed to be destroyed when optimizer plugins are unloaded. If it is indeed destroyed after a plugin is dlclose-d, the destructor of the corresponding ExtensionFn is not mapped anymore, causing a call to unmapped memory during destruction.
This commit guarantees that extensions coming from external plugins are removed from GlobalExtensions when the plugin is unloaded if GlobalExtensions has not been destroyed yet.
Differential Revision: https://reviews.llvm.org/D71959
proven safe.
Summary:
Currently LoopFusion give up when the second loop nest preheader is
not empty. For example:
for (int i = 0; i < 100; ++i) {}
x+=1;
for (int i = 0; i < 100; ++i) {}
The above example should be safe to fuse.
This PR moves instructions in FC1 preheader (e.g. x+=1; ) to
FC0 preheader, which then LoopFusion is able to fuse them.
Reviewer: kbarton, Meinersbur, jdoerfert, dmgreen, fhahn, hfinkel,
bmahjour, etiotto
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D71821
cmp (splat V1, M), SplatC --> splat (cmp V1, SplatC'), M
As discussed in PR44588:
https://bugs.llvm.org/show_bug.cgi?id=44588
...we try harder to push shuffles after binops than after compares.
This patch handles the special (but presumably most common case) of
splat shuffles. If both operands are splats, then we can do the
comparison on the non-splat inputs followed by splat of the compare.
That should take care of the regression noted in D73411.
There's another potential fold requested in PR37463 to scalarize the
compare, but that's another patch (and it's not clear if we can do
that without the ability to undo it later):
https://bugs.llvm.org/show_bug.cgi?id=37463
Differential Revision: https://reviews.llvm.org/D73575
There was a TODO in AAValueConstantRangeArgument to reuse
AAArgumentFromCallSiteArguments. We now do this by allowing new States
to be build from the bestState.
If we invalidate an attribute we need to inform all dependent ones even
if the fixpoint state is not invalid. Before we only continued
invalidation if the fixpoint state was invalid, now we signal a change
in case the fixpoint state is valid.
The test case was already included in D71620 but the problem was hiding
because it only manifested with the old PM (for that input).
This patch modularizes the way we check for no-alias call site arguments
by putting the existing logic into helper functions. The reasoning was
not changed but special cases for readonly/readnone were added.
If `null` is not defined we cannot access it, hence the pointer is
`noalias`. While this is not helpful on it's own it simplifies later
deductions that can skip over already known `noalias` pointers in
certain situations.
During extraction, stale llvm.assume handles may be retained in the
original function. The setup is:
1) CodeExtractor unregisters assumptions in the blocks that are to be
extracted.
2) Extraction happens. There are now two functions: f1 and f1.extracted.
3) Leftover assumptions in f1 (/not/ removed as they were not in the set of
blocks to be extracted) now have affected-value llvm.assume handles in
f1.extracted.
When assumptions for a value used in f1 are looked up, ValueTracking can assert
as some of the handles are in the wrong function. To fix this, simply erase the
llvm.assume calls in the extracted function.
Alternatives include flushing the assumption cache in the original function, or
walking all values used in the original function to prune stale affected-value
handles. Both seem more expensive.
Testing: check-llvm, LNT run with -mllvm -hot-cold-split enabled
rdar://58460728
Previously, the enums didn't account for all the possible cases, which
could cause misleading results (particularly for a "switch" on
FunctionModRefBehavior).
Fixes regression in polly from recent patch to add writeonly to memset.
While I'm here, also fix a few dubious uses of the FMRB_* enum values.
Differential Revision: https://reviews.llvm.org/D73154
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
We have to avoid using a GOT relocation to access the bias variable,
setting the hidden visibility achieves that.
Differential Revision: https://reviews.llvm.org/D73529
This patch adds support for explicitly highlighting sub-expressions
shared by multiple leaf nodes. For example consider the following
code
%shared.load = tail call <8 x double> @llvm.matrix.columnwise.load.v8f64.p0f64(double* %arg1, i32 %stride, i32 2, i32 4), !dbg !10, !noalias !10
%trans = tail call <8 x double> @llvm.matrix.transpose.v8f64(<8 x double> %shared.load, i32 2, i32 4), !dbg !10
tail call void @llvm.matrix.columnwise.store.v8f64.p0f64(<8 x double> %trans, double* %arg3, i32 10, i32 4, i32 2), !dbg !10
%load.2 = tail call <30 x double> @llvm.matrix.columnwise.load.v30f64.p0f64(double* %arg3, i32 %stride, i32 2, i32 15), !dbg !10, !noalias !10
%mult = tail call <60 x double> @llvm.matrix.multiply.v60f64.v8f64.v30f64(<8 x double> %trans, <30 x double> %load.2, i32 4, i32 2, i32 15), !dbg !11
tail call void @llvm.matrix.columnwise.store.v60f64.p0f64(<60 x double> %mult, double* %arg2, i32 10, i32 4, i32 15), !dbg !11
We have two leaf nodes (the 2 stores) and the first store stores %trans
which is also used by the matrix multiply %mult. We generate separate
remarks for each leaf (stores). To denote that parts are shared, the
shared expressions are marked as shared (), with a reference to the
other remark that shares it. The operation summary also denotes the
shared operations separately.
Reviewers: anemet, Gerolf, thegameg, hfinkel, andrew.w.kaylor, LuoYuanke
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D72526
Dead instructions do not need to be sunk. Currently we try and record
the recipies for them, but there are no recipes emitted for them and
there's nothing to sink. They can be removed from SinkAfter while
marking them for recording.
Fixes PR44634.
Reviewers: rengolin, hsaito, fhahn, Ayal, gilr
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D73423
Summary:
Currently IsControlFlowEquivalent determine if two blocks are control
flow equivalent by checking if A dominates B and B post dominates A.
There exists blocks that are control flow equivalent even if they don't
satisfy the A dominates B and B post dominates A condition.
For example,
if (cond)
A
if (cond)
B
In the PR, we determine if two blocks are control flow equivalent by
also checking if the two sets of conditions A and B depends on are
equivalent.
Reviewer: jdoerfert, Meinersbur, dmgreen, etiotto, bmahjour, fhahn,
hfinkel, kbarton
Reviewed By: fhahn
Subscribers: hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D71578
This patch updates the remark to also include a summary of the number of
vector operations generated for each matrix expression.
Reviewers: anemet, Gerolf, thegameg, hfinkel, andrew.w.kaylor, LuoYuanke
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D72480
Generate remarks for matrix operations in a function. To generate remarks
for matrix expressions, the following approach is used:
1. Collect leafs of matrix expressions (done in
RemarkGenerator::getExpressionLeafs). Leafs are lowered matrix
instructions without other matrix users (like stores).
2. For each leaf, create a remark containing a linearizied version of the
matrix expression.
The following improvements will be submitted as follow-ups:
* Summarize number of vector instructions generated for each expression.
* Account for shared sub-expressions.
* Propagate matrix remarks up the inlining chain.
The information provided by the matrix remarks helps users to spot cases
where matrix expression got split up, e.g. due to inlining not
happening. The remarks allow users to address those issues, ensuring
best performance.
Reviewers: anemet, Gerolf, thegameg, hfinkel, andrew.w.kaylor, LuoYuanke
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D72453
D47163 created a rule that we should not change the casted
type of a select when we have matching types in its compare condition.
That was intended to help vector codegen, but it also could create
situations where we miss subsequent folds as shown in PR44545:
https://bugs.llvm.org/show_bug.cgi?id=44545
By using shouldChangeType(), we can continue to get the vector folds
(because we always return false for vector types). But we also solve
the motivating bug because it's ok to narrow the scalar select in that
example.
Our canonicalization rules around select are a mess, but AFAICT, this
will not induce any infinite looping from the reverse transform (but
we'll need to watch for that possibility if committed).
Side note: there's a similar use of shouldChangeType() for phi ops
just below this diff, and the source and destination types appear to
be reversed.
Differential Revision: https://reviews.llvm.org/D72733
Followup to D72978. This moves existing negation handling in
InstCombine into freelyNegateValue(), which make it composable.
In particular, root negations of div/zext/sext/ashr/lshr/sub can
now always be performed through a shl/trunc as well.
Differential Revision: https://reviews.llvm.org/D73288
This restores 59733525d3 (D71913), along
with bot fix 19c76989bb.
The bot failure should be fixed by D73418, committed as
af954e441a.
I also added a fix for non-x86 bot failures by requiring x86 in new test
lld/test/ELF/lto/devirt_vcall_vis_public.ll.
Summary:
LoopUnroll can reuse the RemapInstruction() in ValueMapper, or
remapInstructionsInBlocks() in CloneFunction, depending on the needs.
There is no need to have its own version in LoopUnroll.
By calling RemapInstruction() without TypeMapper or Materializer and
with Flags (RF_NoModuleLevelChanges | RF_IgnoreMissingLocals), it does
the same as remapInstruction(). remapInstructionsInBlocks() calls
RemapInstruction() exactly as described.
Looking at the history, I cannot find any obvious reason to have its own
version.
Reviewer: dmgreen, jdoerfert, Meinersbur, kbarton, bmahjour, etiotto,
foad, aprantl
Reviewed By: jdoerfert
Subscribers: hiraditya, zzheng, llvm-commits, prithayan, anhtuyen
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D73277
Summary:
These instructions ignore parts of the input vectors which makes the
default MSan handling too strict and causes false positive reports.
Reviewers: vitalybuka, RKSimon, thakis
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73374
Patch by Chris Chrulski
When generating value profiling instrumentation, ensure the call gets the
correct funclet token, otherwise WinEHPrepare will turn the call (and all
subsequent instructions) into unreachable.
Differential Revision: https://reviews.llvm.org/D73221
Patch by Chris Chrulski
This fixes a problem with the current behavior when assertions are enabled.
A loop that exits to a catchswitch instruction is skipped for the counter
promotion, however this check was being done after the PGOCounterPromoter
tried to collect an insertion point for the exit block. A call to
getFirstInsertionPt() on a block that begins with a catchswitch instruction
triggers an assertion. This change performs a check whether the counter
promotion is possible prior to collecting the ExitBlocks and InsertPts.
Differential Revision: https://reviews.llvm.org/D73222
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
This fixes a bug where a PHI node that is only referenced by a lifetime.end intrinsic in an otherwise empty cleanuppad can cause SimplyCFG to create an SSA violation while removing the empty cleanuppad. Theoretically the same problem can occur with debug intrinsics.
Differential Revision: https://reviews.llvm.org/D72540
When we use information only to short-cut deduction or improve it, we
can use OPTIONAL dependences instead of REQUIRED ones to avoid cascading
pessimistic fixpoints.
We also need to track dependences only when we use assumed information,
e.g., we act on assumed liveness information.
It can happen that we have instructions in the ToBeDeletedInsts set
which are deleted earlier already. To avoid dangling pointers we use
weak tracking handles.
When we follow uses, e.g., in AAMemoryBehavior or AANoCapture, we need
to make sure the value is a pointer before we ask for abstract
attributes only valid for pointers. This happens because we follow
pointers through calls that do not capture but may return the value.
We might accidentally ask AAValueSimplify to simplify a void value. That
can lead to very interesting, and very wrong, results. We now handle
this case gracefully.
Create a utility wrapper for the RecursivelyDeleteTriviallyDeadInstructions utility
method, which sets to nullptr the instructions that are not trivially
dead. Use the new method in LoopStrengthReduce.
Alternative: add a bool to the same method; this option adds a marginal
amount of overhead to the other callers, and the method needs to be
updated to return a bool status when it removes/doesn't remove
instructions.
If alignment was manifested but it is actually only as good as the
data-layout provided one we should not report it as a change.
For testing purposes we still manifest the information.
Summary:
Third part in series to support Safe Whole Program Devirtualization
Enablement, see RFC here:
http://lists.llvm.org/pipermail/llvm-dev/2019-December/137543.html
This patch adds type test metadata under -fwhole-program-vtables,
even for classes without hidden visibility. It then changes WPD to skip
devirtualization for a virtual function call when any of the compatible
vtables has public vcall visibility.
Additionally, internal LLVM options as well as lld and gold-plugin
options are added which enable upgrading all public vcall visibility
to linkage unit (hidden) visibility during LTO. This enables the more
aggressive WPD to kick in based on LTO time knowledge of the visibility
guarantees.
Support was added to all flavors of LTO WPD (regular, hybrid and
index-only), and to both the new and old LTO APIs.
Unfortunately it was not simple to split the first and second parts of
this part of the change (the unconditional emission of type tests and
the upgrading of the vcall visiblity) as I needed a way to upgrade the
public visibility on legacy WPD llvm assembly tests that don't include
linkage unit vcall visibility specifiers, to avoid a lot of test churn.
I also added a mechanism to LowerTypeTests that allows dropping type
test assume sequences we now aggressively insert when we invoke
distributed ThinLTO backends with null indexes, which is used in testing
mode, and which doesn't invoke the normal ThinLTO backend pipeline.
Depends on D71907 and D71911.
Reviewers: pcc, evgeny777, steven_wu, espindola
Subscribers: emaste, Prazek, inglorion, arichardson, hiraditya, MaskRay, dexonsmith, dang, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71913
The utility method RecursivelyDeleteTriviallyDeadInstructions receives
as input a vector of Instructions, where all inputs are valid
instructions. This same vector is used as a scratch storage (per the
header comment) to recursively delete instructions. If an instruction is
added as an operand of multiple other instructions, it may be added twice,
then deleted once, then the second reference in the vector is invalid.
Switch to using a Vector<WeakTrackingVH>.
This change facilitates a clean-up in LoopStrengthReduction.
We currently use integer ranges to merge concrete function arguments.
We use the ParamState range for those, but we only look up concrete
values in the regular state. For concrete function arguments that are
themselves arguments of the containing function, we can use the param
state directly and improve the precision in some cases.
Besides improving the results in some cases, this is also a small step towards
switching to ValueLatticeElement, by allowing D60582 to be a NFC.
Reviewers: efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D71836
Summary:
First patch to support Safe Whole Program Devirtualization Enablement,
see RFC here: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137543.html
Always emit !vcall_visibility metadata under -fwhole-program-vtables,
and not just for -fvirtual-function-elimination. The vcall visibility
metadata will (in a subsequent patch) be used to communicate to WPD
which vtables are safe to devirtualize, and we will optionally convert
the metadata to hidden visibility at link time. Subsequent follow on
patches will help enable this by adding vcall_visibility metadata to the
ThinLTO summaries, and always emit type test intrinsics under
-fwhole-program-vtables (and not just for vtables with hidden
visibility).
In order to do this safely with VFE, since for VFE all vtable loads must
be type checked loads which will no longer be the case, this patch adds
a new "Virtual Function Elim" module flag to communicate to GlobalDCE
whether to perform VFE using the vcall_visibility metadata.
One additional advantage of using the vcall_visibility metadata to drive
more WPD at LTO link time is that we can use the same mechanism to
enable more aggressive VFE at LTO link time as well. The link time
option proposed in the RFC will convert vcall_visibility metadata to
hidden (aka linkage unit visibility), which combined with
-fvirtual-function-elimination will allow it to be done more
aggressively at LTO link time under the same conditions.
Reviewers: pcc, ostannard, evgeny777, steven_wu
Subscribers: mehdi_amini, Prazek, hiraditya, dexonsmith, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71907
Calling `operator*` on a WeakVH with a null value yields a null
reference, which is UB. Avoid this by implicitly converting the WeakVH
to a `Value *` rather than dereferencing and then taking the address
for the type conversion.
Differential Revision: https://reviews.llvm.org/D73280
In case of loops with multiple exit where all-but-one exit are deoptimizing
it might happen that the first rotation will end up with latch having a deoptimizing
exit. This makes the loop unsuitable for trip-count analysis (say, getLoopEstimatedTripCount)
as well as for loop transformations that know how to handle multple deoptimizing exits.
It pretty much means that canonical form in multple-deoptimizing-exits case should be
with non-deoptimizing exit at latch.
Teach loop-rotation to reach this canonical form by repeating rotation.
-loop-rotate-multi option introduced to control this behavior, currently disabled by default.
Reviewers: skatkov, asbirlea, reames, fhahn
Reviewed By: skatkov
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73058
It is incorrect to call ValueHandleBase::ValueIsRAUWd when only one use
is replaced since it simply violates semantics of the callback and leads
to bugs like PR44320.
Previously this call was used specifically to keep LICM's cache of
AliasSetTrackers up to date across passes (as PR36801 showed, even for
that purpose it didn't work properly), but since LICM doesn't have that
cache anymore, we can safely remove this incorrect call with no
repercussions.
This patch fixes https://bugs.llvm.org/show_bug.cgi?id=44320
Reviewers: asbirlea, fhahn, efriedma, reames
Reviewed-By: asbirlea
Differential Revision: https://reviews.llvm.org/D73089
Apparently cache of AliasSetTrackers held by LICM was the only user of
SimpleAnalysis infrastructure. Now, given that we no longer have that
cache, this infrastructure is obsolete and, taking into account its
nature, we don't want any new solutions to be based on it.
Reviewers: asbirlea, fhahn, efriedma, reames
Reviewed-By: asbirlea
Differential Revision: https://reviews.llvm.org/D73085
Since LICM doesn't use AST caching any more (see D73081), this
infrastructure is now obsolete and we can remove it.
Reviewers: asbirlea, fhahn, efriedma, reames
Reviewed-By: asbirlea
Differential Revision: https://reviews.llvm.org/D73084
Currently due to the edge caching, we create wrong predicates for
branches with matching true and false successors. We will cache the
condition for the edge from the true successor, and then lookup the same
edge (src and dst are the same) for the edge to the false successor.
If both successors match, the condition should always be true. At the
moment, we cannot really create constant VPValues, but we can just
create a true condition as X | !X. Later passes will clean that up.
Fixes PR44488.
Reviewers: rengolin, hsaito, fhahn, Ayal, dorit, gilr
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D73079
Fixes https://bugs.llvm.org/show_bug.cgi?id=44529. We already have
a combine to sink a negation through a left-shift, but it currently
only works if the shift operand is negatable without creating any
instructions. This patch introduces freelyNegateValue() as a more
powerful extension of dyn_castNegVal(), which allows negating a
value as long as this doesn't end up increasing instruction count.
Specifically, this patch adds support for negating A-B to B-A.
This mechanism could in the future be extended to handle general
negation chains that a) start at a proper 0-X negation and b) only
require one operand to be freely negatable. This would end up as a
weaker form of D68408 aimed at the most obviously profitable subset
that eliminates a negation entirely.
Differential Revision: https://reviews.llvm.org/D72978
This addresses https://bugs.llvm.org/show_bug.cgi?id=42801.
The m_c_ICmp() matcher is changed to provide the swapped predicate
if the operands are swapped.
Existing uses of m_c_ICmp() fall in one of two categories: Working
on equality predicates only, where swapping is irrelevant.
Or performing a manual swap, in which case this patch removes it.
The only exception is the foldICmpWithLowBitMaskedVal() fold, which
does not swap the predicate, and instead reasons about whether
a swap occurred or not for each predicate. Getting the swapped
predicate allows us to merge the logic for pairs of predicates,
instead of duplicating it.
Differential Revision: https://reviews.llvm.org/D72976
This is 1 of the potential folds uncovered by extending D72521.
We don't seem to do this in the backend either (unless I'm not
seeing some target-specific transform).
icc and gcc (appears to be target-specific) do this transform.
Differential Revision: https://reviews.llvm.org/D73057
Summary:
This is the first step towards complete removal of AST caching from
LICM. Attempts to keep LICM's AST cache up to date across passes can lead
to miscompiles like this one: https://bugs.llvm.org/show_bug.cgi?id=44320.
LICM has already switched to using MemorySSA to do sinking and hoisting
and only builds an AliasSetTracker on demand for the promoteToScalars
step, without caching it from one LICM instance to the next. Given this,
we don't have compile-time reasons to keep AST caching any more.
The only scenario where the caching would be used currently is when
using the LegacyPassManager and setting -enable-mssa-loop-dependency=false.
This switch should help us to surface any possible issues that may arise
along this way, also it turns subsequent removal of AST caching into NFC.
Reviewers: asbirlea, fhahn, efriedma, reames
Reviewed By: asbirlea
Subscribers: hiraditya, george.burgess.iv, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73081
Summary:
We don't have control/verify what will be the RHS of the division, so it might
happen to be zero, causing UB.
Reviewers: Vasilis, RKSimon, ABataev
Reviewed By: ABataev
Subscribers: vporpo, ABataev, hiraditya, llvm-commits, vdmitrie
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72740
This should be the last step needed to solve the problem in the
description of PR44153:
https://bugs.llvm.org/show_bug.cgi?id=44153
If we're casting an FP value to int, testing its signbit, and then
choosing between a value and its negated value, that's a
complicated way of saying "copysign":
(bitcast X) < 0 ? -TC : TC --> copysign(TC, X)
Differential Revision: https://reviews.llvm.org/D72643
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, nicolasvasilache
Subscribers: hiraditya, jfb, mehdi_amini, rriddle, jpienaar, burmako, shauheen, antiagainst, csigg, arpith-jacob, mgester, lucyrfox, herhut, liufengdb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73041
Summary: Vectorized loop processes VFxUF number of elements in one iteration thus total number of iterations decreases proportionally. In addition epilog loop may not have more than VFxUF - 1 iterations. This patch updates profile information accordingly.
Reviewers: hsaito, Ayal, fhahn, reames, silvas, dcaballe, SjoerdMeijer, mkuper, DaniilSuchkov
Reviewed By: Ayal, DaniilSuchkov
Subscribers: fedor.sergeev, hiraditya, rkruppe, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67905
Summary: Current implementation of getLoopEstimatedTripCount returns 1 iteration less than it should. The reason is that in bottom tested loop first iteration is executed before first back branch is taken. For example for loop with !{!"branch_weights", i32 1 // taken, i32 1 // exit} metadata getLoopEstimatedTripCount gives 1 while actual number of iterations is 2.
Reviewers: Ayal, fhahn
Reviewed By: Ayal
Subscribers: mgorny, hiraditya, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71990
This moves `rewriteLoopExitValues()` from IndVarSimplify to LoopUtils thus
making it a generic loop utility function. This allows to rewrite loop exit
values by just calling this function without running the whole IndVarSimplify
pass.
We use this in D72714 to rematerialise the iteration count in exit blocks, so
that we can clean-up loop update expressions inside the hardware-loops later.
Differential Revision: https://reviews.llvm.org/D72602
Currently there are 4 different mechanisms for controlling denormal
flushing behavior, and about as many equivalent frontend controls.
- AMDGPU uses the fp32-denormals and fp64-f16-denormals subtarget features
- NVPTX uses the nvptx-f32ftz attribute
- ARM directly uses the denormal-fp-math attribute
- Other targets indirectly use denormal-fp-math in one DAGCombine
- cl-denorms-are-zero has a corresponding denorms-are-zero attribute
AMDGPU wants a distinct control for f32 flushing from f16/f64, and as
far as I can tell the same is true for NVPTX (based on the attribute
name).
Work on consolidating these into the denormal-fp-math attribute, and a
new type specific denormal-fp-math-f32 variant. Only ARM seems to
support the two different flush modes, so this is overkill for the
other use cases. Ideally we would error on the unsupported
positive-zero mode on other targets from somewhere.
Move the logic for selecting the flush mode into the compiler driver,
instead of handling it in cc1. denormal-fp-math/denormal-fp-math-f32
are now both cc1 flags, but denormal-fp-math-f32 is not yet exposed as
a user flag.
-cl-denorms-are-zero, -fcuda-flush-denormals-to-zero and
-fno-cuda-flush-denormals-to-zero will be mapped to
-fp-denormal-math-f32=ieee or preserve-sign rather than the old
attributes.
Stop emitting the denorms-are-zero attribute for the OpenCL flag. It
has no in-tree users. The meaning would also be target dependent, such
as the AMDGPU choice to treat this as only meaning allow flushing of
f32 and not f16 or f64. The naming is also potentially confusing,
since DAZ in other contexts refers to instructions implicitly treating
input denormals as zero, not necessarily flushing output denormals to
zero.
This also does not attempt to change the behavior for the current
attribute. The LangRef now states that the default is ieee behavior,
but this is inaccurate for the current implementation. The clang
handling is slightly hacky to avoid touching the existing
denormal-fp-math uses. Fixing this will be left for a future patch.
AMDGPU is still using the subtarget feature to control the denormal
mode, but the new attribute are now emitted. A future change will
switch this and remove the subtarget features.
Static method MemoryDependenceResults::getLoadLoadClobberFullWidthSize
does not have or use any info specific to MemoryDependenceResults.
Move it to its only user: VNCoercion.
This is an alternative to the continous mode that was implemented in
D68351. This mode relies on padding and the ability to mmap a file over
the existing mapping which is generally only available on POSIX systems
and isn't suitable for other platforms.
This change instead introduces the ability to relocate counters at
runtime using a level of indirection. On every counter access, we add a
bias to the counter address. This bias is stored in a symbol that's
provided by the profile runtime and is initially set to zero, meaning no
relocation. The runtime can mmap the profile into memory at abitrary
location, and set bias to the offset between the original and the new
counter location, at which point every subsequent counter access will be
to the new location, which allows updating profile directly akin to the
continous mode.
The advantage of this implementation is that doesn't require any special
OS support. The disadvantage is the extra overhead due to additional
instructions required for each counter access (overhead both in terms of
binary size and performance) plus duplication of counters (i.e. one copy
in the binary itself and another copy that's mmapped).
Differential Revision: https://reviews.llvm.org/D69740
As of D70146 lld GCs comdats as a group and no longer considers notes in
comdats to be GC roots, so we need to move the note to a comdat with a GC root
section (.init_array) in order to prevent lld from discarding the note.
Differential Revision: https://reviews.llvm.org/D72936
During the SeparateConstOffsetFromGEP pass, signed extensions are distributed
to the values that feed into them and then later recombined. The recombination
stage is somewhat problematic- it doesn't differ add and sub instructions
from another when matching the sext(a) +/- sext(b) -> sext(a +/- b) pattern
in some instances.
An example- the IR contains:
%unextendedA
%unextendedB
%subuAuB = unextendedA - unextendedB
%extA = extend A
%extB = extend B
%addeAeB = extA + extB
The problematic optimization will transform that into:
%unextendedA
%unextendedB
%subuAuB = unextendedA - unextendedB
%extA = extend A
%extB = extend B
%addeAeB = extend subuAuB ; Obviously not semantically equivalent to the IR input.
This patch fixes that.
Patch by Drew Wock <drew.wock@sas.com>
Differential Revision: https://reviews.llvm.org/D65967
Fixes https://bugs.llvm.org/show_bug.cgi?id=44552. We need to make
sure that the store is reprocessed, because performing DSE may
expose more DSE opportunities.
There is a slight caveat here though: We need to make sure that we
add back the store the worklist first, because that means it will
be processed after the operands of the removed store have been
processed. This is a general bug in InstCombine worklist management
that I hope to address at some point, but for now it means we need
to do this manually rather than just returning the instruction as
changed.
Differential Revision: https://reviews.llvm.org/D72807
There are two related bugs here: First, we don't add the operand
we're replacing to the worklist, which means it may not get DCEd
(see test change). Second, usually this would just get picked up
in the next iteration, but we also do not report the instruction
as changed. This means that we do not get that extra instcombine
iteration, and more importantly, may break the pass pipeline, as
the function is not marked as changed.
Differential Revision: https://reviews.llvm.org/D72864
Currently, there is no way to disable ExpensiveCombines when doing
a standalone opt -instcombine run, as that's the default, and the
opt option can currently only be used to force enable, not to force
disable. The only way to disable expensive combines is via -O1 or -O2,
but that of course also runs the rest of the kitchen sink...
This patch allows using opt -instcombine -expensive-combines=0 to
run InstCombine without ExpensiveCombines.
Differential Revision: https://reviews.llvm.org/D72861
This reverts commit 3f3017e because there's a failure on peel-loop-nests.ll
with LLVM_ENABLE_EXPENSIVE_CHECKS on.
Differential Revision: https://reviews.llvm.org/D70304
There are a few global (cl::opt) controls that enable optional
behavior in GVN. Introduce GVNOptions that provide corresponding
per-pass instance controls.
That will allow to use GVN multiple times in pipeline each time
with different settings.
Reviewers: asbirlea, rnk, reames, skatkov, fhahn
Reviewed By: fhahn
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72732
Summary:
The old pass manager separated speed optimization and size optimization
levels into two unsigned values. Coallescing both in an enum in the new
pass manager may lead to unintentional casts and comparisons.
In particular, taking a look at how the loop unroll passes were constructed
previously, the Os/Oz are now (==new pass manager) treated just like O3,
likely unintentionally.
This change disallows raw comparisons between optimization levels, to
avoid such unintended effects. As an effect, the O{s|z} behavior changes
for loop unrolling and loop unroll and jam, matching O2 rather than O3.
The change also parameterizes the threshold values used for loop
unrolling, primarily to aid testing.
Reviewers: tejohnson, davidxl
Reviewed By: tejohnson
Subscribers: zzheng, ychen, mehdi_amini, hiraditya, steven_wu, dexonsmith, dang, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72547
Summary:
This commits is a rework of the patch in
https://reviews.llvm.org/D67572.
The rework was requested to prevent out-of-tree performance regression
when vectorizing out-of-tree IR intrinsics. The vectorization of such
intrinsics is enquired via the static function `isTLIScalarize`. For
detail see the discussion in https://reviews.llvm.org/D67572.
Reviewers: uabelho, fhahn, sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72734
The assume intrinsic is intentionally marked as may reading/writing
memory, to avoid passes moving them around. When flattening the CFG
for predicated blocks, we have to drop the assume calls, as they
are control-flow dependent.
There are some cases where we can do better (when control flow is
preserved), but that is follow-up work.
Fixes PR43620.
Reviewers: hsaito, rengolin, dcaballe, Ayal
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D68814
Summary:
This change implements the expansion in two parts:
- Add a utility function emitAMDGPUPrintfCall() in LLVM.
- Invoke the above function from Clang CodeGen, when processing a HIP
program for the AMDGPU target.
The printf expansion has undefined behaviour if the format string is
not a compile-time constant. As a sufficient condition, the HIP
ToolChain now emits -Werror=format-nonliteral.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D71365
After extracting, fix up debug info in both the old and new functions by
1) Pointing line locations and debug intrinsics to the new subprogram
scope, and
2) Deleting intrinsics which point to values outside of the new
function.
Depends on https://reviews.llvm.org/D72795.
Testing: check-llvm, check-clang, a build of LNT in the `-Os -g` config
with "-mllvm -hot-cold-split=1" set, and end-to-end debugging of a toy
program which undergoes splitting to verify that lldb can find
variables, single step, etc. in extracted code.
rdar://45507940
Differential Revision: https://reviews.llvm.org/D72801
It appears to be rather useful when analyzing Loops with multiple
deoptimizing exits, perhaps merged ones.
For now it is used in LoopPredication, will be adding more uses
in other loop passes.
Reviewers: asbirlea, fhahn, skatkov, spatel, reames
Reviewed By: reames
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72754
Summary:
InlineResult is used both in APIs assessing whether a call site is
inlinable (e.g. llvm::isInlineViable) as well as in the function
inlining utility (llvm::InlineFunction). It means slightly different
things (can/should inlining happen, vs did it happen), and the
implicit casting may introduce ambiguity (casting from 'false' in
InlineFunction will default a message about hight costs,
which is incorrect here).
The change renames the type to a more generic name, and disables
implicit constructors.
Reviewers: eraman, davidxl
Reviewed By: davidxl
Subscribers: kerbowa, arsenm, jvesely, nhaehnle, eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72744
Summary: Duplicate code in widenWithVariantLoadUseCodegen is removed and also use assert to check unknown extension type as it should be filtered out by the pre condition check before calling this function.
Reviewers: az, sanjoy, sebpop, efriedma, javed.absar, sanjoy.google
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits, amehsan
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72652
Factor out the logic needed to update debug locations contained within
MD_loop metadata.
This refactor is preparation for a future change that also needs to
rewrite MD_loop metadata.
rdar://45507940
Summary:
Current peeling implementation bails out in case of loop nests.
The patch introduces a field in TargetTransformInfo structure that
certain targets can use to relax the constraints if it's
profitable (disabled by default).
Also additional option is added to enable peeling manually for
experimenting and testing purposes.
Reviewers: fhahn, lebedev.ri, xbolva00
Reviewed By: xbolva00
Subscribers: xbolva00, hiraditya, zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D70304
As discussed in the motivating PR44509:
https://bugs.llvm.org/show_bug.cgi?id=44509
...we can end up with worse code using fast-math than without.
This is because the reassociate pass greedily transforms fsub
into fneg/fadd and apparently (based on the regression tests
seen here) expects instcombine to clean that up if it wasn't
profitable. But we were missing this fold:
(X - Y) - Z --> X - (Y + Z)
There's another, more specific case that I think we should
handle as shown in the "fake" fneg test (but missed with a real
fneg), but that's another patch. That may be tricky to get
right without conflicting with existing transforms for fneg.
Differential Revision: https://reviews.llvm.org/D72521
Summary:
This patch introduces `AAValueConstantRange`, which answers a possible range for integer value in a specific program point.
One of the motivations is propagating existing `range` metadata. (I think we need to change the situation that `range` metadata cannot be put to Argument).
The state is a tuple of `ConstantRange` and it is initialized to (known, assumed) = ([-∞, +∞], empty).
Currently, AAValueConstantRange is created in `getAssumedConstant` method when `AAValueSimplify` returns `nullptr`(worst state).
Supported
- BinaryOperator(add, sub, ...)
- CmpInst(icmp eq, ...)
- !range metadata
`AAValueConstantRange` is not intended to extend to polyhedral range value analysis.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: phosek, davezarzycki, baziotis, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71620
When multiple guard intrinsics are merged into one, currently the
result of eraseInstFromFunction() is returned -- however, this
should only be done if the current instruction is being removed.
In this case we're removing a different instruction and should
instead report that the current one has been modified by returning it.
For this test case, this reduces the number of instcombine iterations
from 5 to 2 (the minimum possible).
Differential Revision: https://reviews.llvm.org/D72558
This ports the MergeFunctions pass to the NewPM. This was rather
straightforward, as no analyses are used.
Additionally MergeFunctions needs to be conditionally enabled in
the PassBuilder, but I left that part out of this patch.
Differential Revision: https://reviews.llvm.org/D72537
This fixes the issue encountered in D71164. Instead of using a
range-based for, manually iterate over the users and advance the
iterator beforehand, so we do not skip any users due to iterator
invalidation.
Differential Revision: https://reviews.llvm.org/D72657
Summary:
An assert added to the index-based WPD was trying to verify that we only
have multiple vtables for a given guid when they are all non-external
linkage. This is too conservative because we may have multiple external
vtable with the same guid when they are in comdat. Remove the assert,
as we don't have comdat information in the index, the linker should
issue an error in this case.
See discussion on D71040 for more information.
Reviewers: evgeny777, aganea
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72648
Summary:
If aligment on `LoadInst` isn't specified, load is assumed to be ABI-aligned.
And said aligment may be different for different types.
So if we change load type, but don't pay extra attention to the aligment
(i.e. keep it unspecified), we may either overpromise (if the default aligment
of the new type is higher), or underpromise (if the default aligment
of the new type is smaller).
Thus, if no alignment is specified, we need to manually preserve the implied ABI alignment.
This addresses https://bugs.llvm.org/show_bug.cgi?id=44543 by making combineLoadToNewType preserve ABI alignment of the load.
Reviewers: spatel, lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72710
This reverts commit a03d7b0f24.
As discussed in D68298, this causes a compile-time regression, in case
the DTs requested are not used elsewhere in GlobalOpt. We should only
get the DTs if they are available here, but this seems not possible with
the legacy pass manager from a module pass.
Summary: This fixes a crash in internal builds under SamplePGO.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72653
Summary:
A recent fix in D69452 fixed index based WPD in the presence of
available_externally vtables. It added a cast of the vtable def
summary to a GlobalVarSummary. However, in some cases one def may be an
alias, in which case we need to get the base object before casting,
otherwise we will crash.
Reviewers: evgeny777, steven_wu, aganea
Subscribers: mehdi_amini, inglorion, hiraditya, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71040
Fix https://bugs.llvm.org/show_bug.cgi?id=44419 by preserving the
nuw on sub of geps. We only do this if the offset has a multiplication
as the final operation, as we can't be sure the operations is nuw
in the other cases without more thorough analysis.
Differential Revision: https://reviews.llvm.org/D72048
Summary:
Avoid using the `nocf_check` attribute with Control Flow Guard. Instead, use a
new `"guard_nocf"` function attribute to indicate that checks should not be
added on indirect calls within that function. Add support for
`__declspec(guard(nocf))` following the same syntax as MSVC.
Reviewers: rnk, dmajor, pcc, hans, aaron.ballman
Reviewed By: aaron.ballman
Subscribers: aaron.ballman, tomrittervg, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72167
Memory instruction widening recipes use the pointer operand of their load/store
ingredient for generating the needed GEPs, making it difficult to feed these
recipes with pointers based on other ingredients or none at all.
This patch modifies these recipes to use a VPValue for the pointer instead, in
order to reduce ingredient def-use usage by ILV as a step towards full
VPlan-based def-use relations. The recipes are constructed with VPValues bound
to these ingredients, maintaining current behavior.
Differential revision: https://reviews.llvm.org/D70865
pass.
Summary: This patch changes LoopUnrollAndJamPass to a function pass, and
keeps the loops traversal order same as defined in
FunctionToLoopPassAdaptor LoopPassManager.h.
The next patch will change the loop traversal to outer to inner order,
so more loops can be transform.
Discussion in llvm-dev mailing list:
https://groups.google.com/forum/#!topic/llvm-dev/LF4rUjkVI2g
Reviewer: dmgreen, jdoerfert, Meinersbur, kbarton, bmahjour, etiotto
Reviewed By: dmgreen
Subscribers: hiraditya, zzheng, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D72230
This is a special case of Z / (X / Y) => (Y * Z) / X, with X = 1.0.
The m_OneUse check is avoided because even in the case of the
multiple uses for 1.0/Y, the number of instructions remain the same
and a division is replaced by a multiplication.
Differential Revision: https://reviews.llvm.org/D72319
This patch updates the shape propagation to iterate until no new shape
information is discovered.
As initial seed for the forward propagation, we use the matrix intrinsic
instructions. Both propagateShapeForward and propagateShapeBackward
return new work lists, with the instructions to be used for the next
iteration. When propagating forward, we record all instructions we added
new shape information for. When propagating backward, we record all
users of instructions we added new shape information for.
Reviewers: anemet, Gerolf, reames, hfinkel, andrew.w.kaylor
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70901
This patch extends to shape propagation to also include load
instructions and implements shape aware lowering for vector loads.
Reviewers: anemet, Gerolf, reames, hfinkel, andrew.w.kaylor
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70900
This patch extends the shape propagation for matrix operations to also
propagate the shape of instructions to their operands.
Reviewers: anemet, Gerolf, reames, hfinkel, andrew.w.kaylor
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70899
This addresses a vectorisation regression for tail-folded loops that are
counting down, e.g. loops as simple as this:
void foo(char *A, char *B, char *C, uint32_t N) {
while (N > 0) {
*C++ = *A++ + *B++;
N--;
}
}
These are loops that can be vectorised, but when tail-folding is requested, it
can't find a primary induction variable which we do need for predicating the
loop. As a result, the loop isn't vectorised at all, which it is able to do
when tail-folding is not attempted. So, this adds a check for the primary
induction variable where we decide how to lower the scalar epilogue. I.e., when
there isn't a primary induction variable, a scalar epilogue loop is allowed
(i.e. don't request tail-folding) so that vectorisation could still be
triggered.
Having this check for the primary induction variable make sense anyway, and in
addition, in a follow-up of this I will look into discovering earlier the
primary induction variable for counting down loops, so that this can also be
tail-folded.
Differential revision: https://reviews.llvm.org/D72324
When we replace instructions with unreachable we delete instructions. We
now avoid dangling pointers to those deleted instructions in the
`ToBeChangedToUnreachableInsts` set. Other modification collections
might need to be updated in the future as well.
This reverts commit a041c4ec6f.
This looks like a non-trivial change and there has been no code
reviews (at least there were no phabricator revisions attached to the
commit description). It is also causing a regression in one of our
downstream integration tests, we haven't been able to come up with a
minimal reproducer yet.
Factor out common logic into some reasonable commented helper functions. In the process, ensure that the in-block vs cross-block cases are handled the same. They previously weren't.
Differential Revision: https://reviews.llvm.org/D67126
not (select ?, (cmp TPred, ?, ?), (cmp FPred, ?, ?) -->
select ?, (cmp TPred', ?, ?), (cmp FPred', ?, ?)
If both sides of the select are cmps, we can remove an instruction.
The case where only side is a cmp is deferred to a possible
follow-on patch.
We have a more general 'isFreeToInvert' analysis, but I'm not seeing
a way to use that more widely without inducing infinite looping
(opposing transforms).
Here, we flip the compare predicates directly, so we should not have
any danger by creating extra intermediate 'not' ops.
Alive proofs:
https://rise4fun.com/Alive/jKa
Name: both select values are compares - invert predicates
%tcmp = icmp sle i32 %x, %y
%fcmp = icmp ugt i32 %z, %w
%sel = select i1 %cond, i1 %tcmp, i1 %fcmp
%not = xor i1 %sel, true
=>
%tcmp_not = icmp sgt i32 %x, %y
%fcmp_not = icmp ule i32 %z, %w
%not = select i1 %cond, i1 %tcmp_not, i1 %fcmp_not
Name: false val is compare - invert/not
%fcmp = icmp ugt i32 %z, %w
%sel = select i1 %cond, i1 %tcmp, i1 %fcmp
%not = xor i1 %sel, true
=>
%tcmp_not = xor i1 %tcmp, -1
%fcmp_not = icmp ule i32 %z, %w
%not = select i1 %cond, i1 %tcmp_not, i1 %fcmp_not
Differential Revision: https://reviews.llvm.org/D72007
Summary:
In addMustTailToCoroResumes, we set musttail on those resume instructions that are followed by a ret instruction. This is done by simplifyTerminatorLeadingToRet which replace a sequence of branches leading to a ret with a clone of the ret.
However it forgets to remove corresponding PHI values that come from basic block of replaced branch, and may cause jumpthreading pass hangs (https://bugs.llvm.org/show_bug.cgi?id=43720)
This patch fix this issue
Test Plan:
cppcoro library with O3+flto
check-llvm
Reviewers: modocache, GorNishanov, lewissbaker
Reviewed By: modocache
Subscribers: mehdi_amini, EricWF, hiraditya, dexonsmith, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71826
Patch by junparser (JunMa)!
SCEVExpander modifies the underlying function so it is more suitable in
Transforms/Utils, rather than Analysis. This allows using other
transform utils in SCEVExpander.
Reviewers: sanjoy.google, efriedma, reames
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D71537
I would think it's better than having two practically identical folds
next to eachother, but then generalization isn't all that pretty
due to the fact that we need to produce different `sub` each time..
This change is no-functional-changes-intended refactoring.
Summary:
For artificial cases (huge array, few usages), Global SRA optimization creates
a lot of redundant data. It creates an instance of GlobalVariable for each array
element. For huge array, that means huge compilation time and huge memory usage.
Following example compiles for 10 minutes and requires 40GB of memory.
namespace {
char LargeBuffer[64 * 1024 * 1024];
}
int main ( void ) {
LargeBuffer[0] = 0;
printf("\n ");
return LargeBuffer[0] == 0;
}
The fix is to avoid Global SRA for large arrays.
Reviewers: craig.topper, rnk, efriedma, fhahn
Reviewed By: rnk
Subscribers: xbolva00, lebedev.ri, lkail, merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71993
Name: (X & (- Y)) - X -> - (X & (Y - 1)) (PR44448)
%negy = sub i8 0, %y
%unbiasedx = and i8 %negy, %x
%r = sub i8 %unbiasedx, %x
=>
%ymask = add i8 %y, -1
%xmasked = and i8 %ymask, %x
%r = sub i8 0, %xmasked
https://rise4fun.com/Alive/OIpla
This decreases use count of %x, may allow us to
later hoist said negation even further,
and results in marginally nicer X86 codegen.
See
https://bugs.llvm.org/show_bug.cgi?id=44448https://reviews.llvm.org/D71499
If we replace a function with a new one because we rewrite the
signature, dead users may still refer to the old version. With this
patch we reuse the code that deals with dead functions, which the old
versions are, to avoid problems.
An inbounds GEP results in poison if the value is not "inbounds", not in
UB. We accidentally derived nonnull and dereferenceable from these
inbounds GEPs even in the absence of accesses that would make the poison
to UB.
The patch makes sure that the LastThrowing pointer does not point to any instruction deleted by call to DeleteDeadInstruction.
While iterating through the instructions the pass maintains a pointer to the lastThrowing Instruction. A call to deleteDeadInstruction deletes a dead store and other instructions feeding the original dead instruction which also become dead. The instruction pointed by the lastThrowing pointer could also be deleted by the call to DeleteDeadInstruction and thus it becomes a dangling pointer. Because of this, we see an error in the next iteration.
In the patch, we maintain a list of throwing instructions encountered previously and use the last non deleted throwing instruction from the container.
Reviewers: fhahn, bcahoon, efriedma
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D65326
As shown in P44383:
https://bugs.llvm.org/show_bug.cgi?id=44383
...we can't safely propagate a vector constant through this icmp fold
if that vector constant contains undefined elements.
We know that each defined element of the constant is safe though, so
find the first of those and replicate it into the formerly undef lanes.
Differential Revision: https://reviews.llvm.org/D72101
This is a less ambitious alternative to previous attempts to fix
this bug with:
rG56b2aee1875a
rGef02831f0a4e
rG56b2aee1875a
...because those all failed bot testing with use-after-free or
other problems.
The original crashing/assert problem is still showing up on
various fuzzers, so I've added a new minimal test based on
another one of those failures.
Instead of trying to manage and coordinate the logic in
isAllocSiteRemovable() with the deletion loops, just loosen
the existing code that handles casts and GEP by replacing
with undef to allow other opcodes. That means that no
instructions with uses should assert on deletion, and there
are hopefully no non-obvious sanitizer bugs induced.
A series of patches beginning with https://reviews.llvm.org/D71898
propose to add an implementation of the coroutine passes to the new pass
manager. As part of these changes, the coroutine passes that implement
the legacy pass manager interface are renamed, to `<PassName>Legacy`.
This mirrors similar changes that have been made to many other passes in
LLVM as they've been transitioned to support both old and new pass
managers.
This commit splits out the renaming portion of that patch and commits it
in advance as an NFC (no functional change intended) commit. It renames:
* `CoroEarly` => `CoroEarlyLegacy`
* `CoroSplit` => `CoroSplitLegacy`
* `CoroElide` => `CoroElideLegacy`
* `CoroCleanup` => `CoroCleanupLegacy`
This patch introduces `AAValueConstantRange`, which answers a possible range for integer value in a specific program point.
One of the motivations is propagating existing `range` metadata. (I think we need to change the situation that `range` metadata cannot be put to Argument).
The state is a tuple of `ConstantRange` and it is initialized to (known, assumed) = ([-∞, +∞], empty).
Currently, AAValueConstantRange is created when AAValueSimplify cannot
simplify the value.
Supported
- BinaryOperator(add, sub, ...)
- CmpInst(icmp eq, ...)
- !range metadata
`AAValueConstantRange` is not intended to extend to polyhedral range value analysis.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D71620
The instructions use a mask to either pack disjoint bits together(pext) or spread bits to disjoint locations(pdep). If the mask is all 0s then no bits are extracted or deposited. If the mask is all ones, then the source value is written to the result since no compression or expansion happens. Otherwise if both the source and mask are constant we can walk the bits in the source/mask and calculate the result.
There other crazier things we could do like computeKnownBits or turning pext into shift/and if only a single contiguous range of bits is extracted.
Fixes PR44389
Differential Revision: https://reviews.llvm.org/D71952
This does not solve PR17101, but it is one of the
underlying diffs noted here:
https://bugs.llvm.org/show_bug.cgi?id=17101#c8
We could ease the one-use checks for the 'clear'
(no 'not' op) half of the transform, but I do not
know if that asymmetry would make things better
or worse.
Proofs:
https://rise4fun.com/Alive/uVB
Name: masked bit set
%sh1 = shl i32 1, %y
%and = and i32 %sh1, %x
%cmp = icmp ne i32 %and, 0
%r = zext i1 %cmp to i32
=>
%s = lshr i32 %x, %y
%r = and i32 %s, 1
Name: masked bit clear
%sh1 = shl i32 1, %y
%and = and i32 %sh1, %x
%cmp = icmp eq i32 %and, 0
%r = zext i1 %cmp to i32
=>
%xn = xor i32 %x, -1
%s = lshr i32 %xn, %y
%r = and i32 %s, 1
Judging by the existing comments, this was the intention, but the
transform never actually checked if the existing phi's would be removed.
See https://bugs.llvm.org/show_bug.cgi?id=44242 for an example where
this causes much worse code generation on AMDGPU.
Differential Revision: https://reviews.llvm.org/D71209
As part of the Attributor manifest we want to change the signature of
functions. This patch introduces a fairly generic interface to do so.
As a first, very simple, use case, we remove unused arguments. A second
use case, pointer privatization, will be committed with this patch as
well.
A lot of the code and ideas are taken from argument promotion and we
run all argument promotion tests through this framework as well.
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D68765
Since the information is known we can simply use it at the call site.
This is especially useful for callbacks but also helps regular calls.
The test changes are mechanical.
This is the second step after D67871 to make use of abstract call sites.
In this patch the argument we associate with a abstract call site
argument can be the one in the callback callee instead of the one in the
callback broker.
Caveat: We cannot allow no-alias arguments for problematic callbacks:
As described in [1], adding no-alias (or restrict) to arguments could
break synchronization as the synchronization effect, e.g., a barrier,
does not "alias" with the pointer anymore. This disables no-alias
annotation for potentially problematic arguments until we implement the
fix described in [1].
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D68008
[1] Compiler Optimizations for OpenMP, J. Doerfert and H. Finkel,
International Workshop on OpenMP 2018,
http://compilers.cs.uni-saarland.de/people/doerfert/par_opt18.pdf
Especially for callbacks, annotating the call site arguments is
important. Doing so exposed a too strong dependence of AAMemoryBehavior
on AANoCapture since we handle the case of potentially captured pointers
explicitly.
The changes to the tests are all mechanical.
Summary: This patch makes `AAValueSimplify` use `changeUsesAfterManifest` in `manifest`. This will invoke simple folding after the manifest.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71972
A branch is considered UB if it depends on an undefined / uninitialized value.
At this point this handles simple UB branches in the form: `br i1 undef, ...`
We query `AAValueSimplify` to get a value for the branch condition, so the branch
can be more complicated than just: `br i1 undef, ...`.
Patch By: Stefanos Baziotis (@baziotis)
Reviewers: jdoerfert, sstefan1, uenoku
Reviewed By: uenoku
Differential Revision: https://reviews.llvm.org/D71799
This patch extends the current shape propagation and shape aware
lowering to also support binary operators. Those operators are uniform
with respect to their shape (shape of the input operands is the same as
the shape of their result).
Reviewers: anemet, Gerolf, reames, hfinkel, andrew.w.kaylor
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70898
Summary: Calling `changeToUnreachable` in `manifest` from different places might cause really unpredictable problems. As other deleting functions are doing, we need to change these instructions after all `manifest`.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71910
Summary:
As discussed in D71799, we have found that it is more useful to reach an optimistic fixpoint in AAValueSimpify when the value is constant or undef.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: baziotis, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71852
Summary:
Follow-up on: https://reviews.llvm.org/D71435
We basically use `checkForAllInstructions` to loop through all the instructions in a function that access memory through a pointer: load, store, atomicrmw, atomiccmpxchg
Note that we can now use the `getPointerOperand()` that gets us the pointer operand for an instruction that belongs to the aforementioned set.
Question: This function returns `nullptr` if the instruction is `volatile`. Why?
Guess: Because if it is volatile, we don't want to do any transformation to it.
Another subtle point is that I had to add AtomicRMW, AtomicCmpXchg to `initializeInformationCache()`. Following `checkAllInstructions()` path, that
seemed the most reasonable place to add it and correct the fact that these instructions were ignored (they were not in `OpcodeInstMap` etc.). Is that ok?
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert, sstefan1
Subscribers: hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71787
_Eventually_, this attribute will be assigned to a function if it
contains undefined behavior. As a first small step, I tried to make it
loop through the load instructions in a function (eventually, the plan
is to check if a load instructions causes undefined behavior, because
e.g. dereferences a null pointer - Also eventually, this won't happen in
initialize() but in updateImpl()).
Patch By: Stefanos Baziotis (@baziotis)
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D71435
If the matrix.multiply calls have the contract fast math flag, we can
use fmuladd. This als adds a command line option to force fmuladd
generation. We can retire this option once there is a clang-level
option.
Reviewers: anemet, Gerolf, hfinkel, andrew.w.kaylor
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70951
This patch adds infrastructure for forward shape propagation to
LowerMatrixIntrinsics. It also updates the pass to make use of
the shape information to break up larger vector operations and to
eliminate unnecessary conversion operations between columnwise matrixes
and flattened vectors: if shape information is available for an
instruction, lower the operation to a set of instructions operating on
columns. For example, a store of a matrix is broken down into separate
stores for each column. For users that do not have shape
information (e.g. because they do not yet support shape information
aware lowering), we pack the result columns into a flat vector and
update those users.
It also adds shape aware lowering for the first non-intrinsic
instruction: vector stores.
Example:
For
%c = call <4 x double> @llvm.matrix.transpose(<4 x double> %a, i32 2, i32 2)
store <4 x double> %c, <4 x double>* %Ptr
We generate the code below without shape propagation. Note %9 which
combines the columns of the transposed matrix into a flat vector.
%split = shufflevector <4 x double> %a, <4 x double> undef, <2 x i32> <i32 0, i32 1>
%split1 = shufflevector <4 x double> %a, <4 x double> undef, <2 x i32> <i32 2, i32 3>
%1 = extractelement <2 x double> %split, i64 0
%2 = insertelement <2 x double> undef, double %1, i64 0
%3 = extractelement <2 x double> %split1, i64 0
%4 = insertelement <2 x double> %2, double %3, i64 1
%5 = extractelement <2 x double> %split, i64 1
%6 = insertelement <2 x double> undef, double %5, i64 0
%7 = extractelement <2 x double> %split1, i64 1
%8 = insertelement <2 x double> %6, double %7, i64 1
%9 = shufflevector <2 x double> %4, <2 x double> %8, <4 x i32> <i32 0, i32 1, i32 2, i32 3>
store <4 x double> %9, <4 x double>* %Ptr
With this patch, we propagate the 2x2 shape information from the
transpose to the store and we generate the code below. Note that we
store the columns directly and do not need an extra shuffle.
%9 = bitcast <4 x double>* %Ptr to double*
%10 = bitcast double* %9 to <2 x double>*
store <2 x double> %4, <2 x double>* %10, align 8
%11 = getelementptr double, double* %9, i32 2
%12 = bitcast double* %11 to <2 x double>*
store <2 x double> %8, <2 x double>* %12, align 8
Reviewers: anemet, Gerolf, reames, hfinkel, andrew.w.kaylor
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70897
As discussed in PR44330:
https://bugs.llvm.org/show_bug.cgi?id=44330
...the transform from pow(X, -0.5) libcall/intrinsic to
reciprocal square root can result in small deviations from
the expected result due to differences in the pow()
implementation and/or the extra rounding step from the division.
This patch proposes to allow that difference with either the
'approximate functions' or 'reassociate' FMF:
http://llvm.org/docs/LangRef.html#fast-math-flags
In practice, this likely means that the code is compiled with
all of 'fast' (-ffast-math), but I have preserved the existing
specializations for -0.0/-INF that enable generating safe code
if those special values are allowed simultaneously with
allowing approximation/reassociation.
The question about whether a similar restriction is needed for
the non-reciprocal case -- pow(X, 0.5) -- is deferred. That
transform is allowed without FMF currently, and this patch does
not change that behavior.
Differential Revision: https://reviews.llvm.org/D71706
Summary:
This patch limits the default number of iterations performed by InstCombine. It also exposes a new option that allows to specify how many iterations is considered getting stuck in an infinite loop.
Based on experiments performed on real-world C++ programs, InstCombine seems to perform at most ~8-20 iterations, so treating 1000 iterations as an infinite loop seems like a safe choice. See D71145 for details.
The two limits can be specified via command line options.
Reviewers: spatel, lebedev.ri, nikic, xbolva00, grosser
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71673
A sequence of additions or multiplications that is known not to wrap, may wrap
if it's order is changed (i.e., reassociated). Therefore when vectorizing
integer sum or product reductions, their no-wrap flags need to be removed.
Fixes PR43828
Patch by Denis Antrushin
Differential Revision: https://reviews.llvm.org/D69563
A function marked `noreturn` may contain unreachable terminators: these
should not be considered cold, as the function may be a trampoline.
rdar://58068594
Summary:
Ignore looking at blocks that are unreachable from entry when
collecting candidates for hosting.
Normally the consthoist pass is executed in the llc pipeline,
just after unreachableblockelim. So it is abnormal to have code
that is unreachable from the entry block. But when running the
pass as part of opt, for example as part of fuzzy testing, we
might trigger various kinds of asserts when collecting candidates
if we include unreachable blocks in that analysis.
It seems like a waste of time to hoist constants in unreachble
blocks, so the solution is to simply ignore such blocks when
collecting the hoisting candidates.
The two added test cases used to end up in two different asserts,
and the intention with the checks is just to verify that we no
longer fail.
Fixes: PR43903
Reviewers: spatel
Reviewed By: spatel
Subscribers: hiraditya, uabelho, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71678
In certain situations after inlining and simplification we end up with
code that is _almost_ a min/max pattern, but contains constants that
have been demand-bit optimised to the wrong values, ending up with code
like:
%1 = icmp slt i32 %shr, -128
%2 = select i1 %1, i32 128, i32 %shr
%.inv = icmp sgt i32 %shr, 127
%spec.select.i = select i1 %.inv, i32 127, i32 %2
%conv7 = trunc i32 %spec.select.i to i8
This should be turned into a min/max pattern, but the -128 in the first
select was instead transformed into 128, as only the bottom byte was
ever demanded.
To fix this, I've put in further canonicalisation for the immediates of
selects, preferring to use the same value as the icmp if available.
Differential Revision: https://reviews.llvm.org/D71516
Loop fusion previously had a method to check whether a loop was in rotated form. This method has
been moved into the LoopInfo class. This patch removes the old isRotated method from loop fusion,
in favour of the new one in LoopInfo.
Summary:
This patch adds instructions to the InstCombine worklist after they are properly inserted. This way we don't get `<badref>`s printed when logging added instructions.
It also adds a check in `Worklist::Add` that ensures that all added instructions have parents.
Simple test case that illustrates the difference when run with `--debug-only=instcombine`:
```
define i32 @test35(i32 %a, i32 %b) {
%1 = or i32 %a, 1135
%2 = or i32 %1, %b
ret i32 %2
}
```
Before this patch:
```
INSTCOMBINE ITERATION #1 on test35
IC: ADDING: 3 instrs to worklist
IC: Visiting: %1 = or i32 %a, 1135
IC: Visiting: %2 = or i32 %1, %b
IC: ADD: %2 = or i32 %a, %b
IC: Old = %3 = or i32 %1, %b
New = <badref> = or i32 %2, 1135
IC: ADD: <badref> = or i32 %2, 1135
...
```
With this patch:
```
INSTCOMBINE ITERATION #1 on test35
IC: ADDING: 3 instrs to worklist
IC: Visiting: %1 = or i32 %a, 1135
IC: Visiting: %2 = or i32 %1, %b
IC: ADD: %2 = or i32 %a, %b
IC: Old = %3 = or i32 %1, %b
New = <badref> = or i32 %2, 1135
IC: ADD: %3 = or i32 %2, 1135
...
```
Reviewers: fhahn, davide, spatel, foad, grosser, nikic
Reviewed By: nikic
Subscribers: nikic, lebedev.ri, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71093
Summary:
This patch teaches InstCombine to accept a new parameter: maximum number of iterations over functions.
InstCombine tries to simplify instructions by iterating over the whole function until the function stops changing. As a consequence, the last iteration before reaching a fixpoint visits all instructions in the worklist and never performs any rewrites.
Bounding the number of iterations can have 2 benefits:
* In case the users of the pass can make a good guess about the number of required iterations, we can save the time normally spent on the last iteration that doesn't change anything.
* When the wants to use InstCombine as a cleanup pass, it may be enough to run just a few iterations and stop even before reaching a fixpoint. This can be also useful for implementing a lightweight pass pipeline (think `-O1`).
This patch does not change the behavior of opt or Clang -- limiting the number of iterations is entirely opt-in.
Reviewers: fhahn, davide, spatel, foad, nlopes, grosser, lebedev.ri, nikic, xbolva00
Reviewed By: spatel
Subscribers: craig.topper, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71145
This reverts commit 1f3dd83cc1, reapplying
commit bb1b0bc4e5.
The original commit failed on some builds seemingly due to the use of a
bracketed constructor with an std::array, i.e. `std::array<> arr({...})`.
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. This patch enables the salvaging of casts by using the
DW_OP_LLVM_convert operator for SExt and Trunc instructions.
There is another issue which is exposed by this fix, in which fragment
DIExpressions (which are preserved more readily by this patch) for
values that must be split across registers in ISel trigger an assertion,
as the 'split' fragments extend beyond the bounds of the fragment
DIExpression causing an error. This patch also fixes this issue by
checking the fragment status of DIExpressions which are to be split, and
dropping fragments that are invalid.
Add an extra parameter so alignment can be taken under
consideration in gather/scatter legalization.
Differential Revision: https://reviews.llvm.org/D71610
Summary:This PR move instructions from FC0.Latch bottom up to the
beginning of FC1.Latch as long as they are proven safe.
To illustrate why this is beneficial, let's consider the following
example:
Before Fusion:
header1:
br header2
header2:
br header2, latch1
latch1:
br header1, preheader3
preheader3:
br header3
header3:
br header4
header4:
br header4, latch3
latch3:
br header3, exit3
After Fusion (before this PR):
header1:
br header2
header2:
br header2, latch1
latch1:
br header3
header3:
br header4
header4:
br header4, latch3
latch3:
br header1, exit3
Note that preheader3 is removed during fusion before this PR.
Notice that we cannot fuse loop2 with loop4 as there exists block latch1
in between.
This PR move instructions from latch1 to beginning of latch3, and remove
block latch1. LoopFusion is now able to fuse loop nest recursively.
After Fusion (after this PR):
header1:
br header2
header2:
br header3
header3:
br header4
header4:
br header2, latch3
latch3:
br header1, exit3
Reviewer: kbarton, jdoerfert, Meinersbur, dmgreen, fhahn, hfinkel,
bmahjour, etiotto
Reviewed By: kbarton, Meinersbur
Subscribers: hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D71165
Summary:
Add trimming of unused components of s_buffer_load.
Extend trimming of *buffer_load to also include
unused components at the beginning of vectors and update offset.
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70315
Summary:
This is a resubmit of D71473.
This patch introduces a set of functions to enable deprecation of IRBuilder functions without breaking out of tree clients.
Functions will be deprecated one by one and as in tree code is cleaned up.
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: aaron.ballman, courbet
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71547
The Attributor is always kept formatted so diffs are cleaner.
Sometime we get out of sync for various reasons so we need to format the
file once in a while.
Summary:
This patch restricts loop fusion to only consider rotated loops as valid candidates.
This simplifies the analysis and transformation and aligns with other loop optimizations.
Reviewers: jdoerfert, Meinersbur, dmgreen, etiotto, Whitney, fhahn, hfinkel
Reviewed By: Meinersbur
Subscribers: ormris, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71025
Summary:
This patch introduces a set of functions to enable deprecation of IRBuilder functions without breaking out of tree clients.
Functions will be deprecated one by one and as in tree code is cleaned up.
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71473
Summary:
In commit d60f34c20a (llvm-svn 317128,
PR35113) MergeBlockIntoPredecessor was changed into
discarding some dbg.value intrinsics referring to
PHI values, post-splice due to loop rotation.
That elimination of dbg.value intrinsics did not
consider which dbg.value to keep depending on the
context (e.g. if the variable is changing its value
several times inside the basic block).
In the past that hasn't been such a big problem since
CodeGenPrepare::placeDbgValues has moved the dbg.value
to be next to the PHI node anyway. But after commit
00e238896c CodeGenPrepare isn't doing that
any longer, so we need to be more careful when avoiding
duplicate dbg.value intrinsics in MergeBlockIntoPredecessor.
This patch replaces the code that tried to avoid duplicate
dbg.values by using the RemoveRedundantDbgInstrs helper.
Reviewers: aprantl, jmorse, vsk
Reviewed By: aprantl, vsk
Subscribers: jholewinski, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71480
Summary:
Add a RemoveRedundantDbgInstrs to BasicBlockUtils with the
goal to remove redundant dbg intrinsics from a basic block.
This can be useful after various transforms, as it might
be simpler to do a filtering of dbg intrinsics after the
transform than during the transform.
One primary use case would be to replace a too aggressive
removal done by MergeBlockIntoPredecessor, seen at loop
rotate (not done in this patch).
The elimination algorithm currently focuses on dbg.value
intrinsics and is doing two iterations over the BB.
First we iterate backward starting at the last instruction
in the BB. Whenever a consecutive sequence of dbg.value
instructions are found we keep the last dbg.value for
each variable found (variable fragments are identified
using the {DILocalVariable, FragmentInfo, inlinedAt}
triple as given by the DebugVariable helper class).
Next we iterate forward starting at the first instruction
in the BB. Whenever we find a dbg.value describing a
DebugVariable (identified by {DILocalVariable, inlinedAt})
we save the {DIValue, DIExpression} that describes that
variables value. But if the variable already was mapped
to the same {DIValue, DIExpression} pair we instead drop
the second dbg.value.
To ease the process of making lit tests for this utility a
new pass is introduced called RedundantDbgInstElimination.
It can be executed by opt using -redundant-dbg-inst-elim.
Reviewers: aprantl, jmorse, vsk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71478
This was part of D70767. When we replace the value of (call/invoke)
instructions we do not want to disturb the old call graph so we will
only replace instruction uses until we get rid of the old PM.
Accepted as part of D70767.
This reverts commit 0be81968a2.
The VFDatabase needs some rework to be able to handle vectorization
and subsequent scalarization of intrinsics in out-of-tree versions of
the compiler. For more details, see the discussion in
https://reviews.llvm.org/D67572.
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
Summary:
Support alloca-referencing dbg.value in hwasan instrumentation.
Update AsmPrinter to emit DW_AT_LLVM_tag_offset when location is in
loclist format.
Reviewers: pcc
Subscribers: srhines, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70753
When we reason about the pointer argument that is byval we actually
reason about a local copy of the value passed at the call site. This was
not the case before and we wrongly introduced attributes based on the
surrounding function.
AAMemoryBehaviorArgument, AAMemoryBehaviorCallSiteArgument and
AANoCaptureCallSiteArgument are made aware of byval now. The code
to skip "subsuming positions" for reasoning follows a common pattern and
we should refactor it. A TODO was added.
Discovered by @efriedma as part of D69748.
This is the first patch adding an initial set of matrix intrinsics and a
corresponding lowering pass. This has been discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2019-October/136240.html
The first patch introduces four new intrinsics (transpose, multiply,
columnwise load and store) and a LowerMatrixIntrinsics pass, that
lowers those intrinsics to vector operations.
Matrixes are embedded in a 'flat' vector (e.g. a 4 x 4 float matrix
embedded in a <16 x float> vector) and the intrinsics take the dimension
information as parameters. Those parameters need to be ConstantInt.
For the memory layout, we initially assume column-major, but in the RFC
we also described how to extend the intrinsics to support row-major as
well.
For the initial lowering, we split the input of the intrinsics into a
set of column vectors, transform those column vectors and concatenate
the result columns to a flat result vector.
This allows us to lower the intrinsics without any shape propagation, as
mentioned in the RFC. In follow-up patches, we plan to submit the
following improvements:
* Shape propagation to eliminate the embedding/splitting for each
intrinsic.
* Fused & tiled lowering of multiply and other operations.
* Optimization remarks highlighting matrix expressions and costs.
* Generate loops for operations on large matrixes.
* More general block processing for operation on large vectors,
exploiting shape information.
We would like to add dedicated transpose, columnwise load and store
intrinsics, even though they are not strictly necessary. For example, we
could instead emit a large shufflevector instruction instead of the
transpose. But we expect that to
(1) become unwieldy for larger matrixes (even for 16x16 matrixes,
the resulting shufflevector masks would be huge),
(2) risk instcombine making small changes, causing us to fail to
detect the transpose, preventing better lowerings
For the load/store, we are additionally planning on exploiting the
intrinsics for better alias analysis.
Reviewers: anemet, Gerolf, reames, hfinkel, andrew.w.kaylor, efriedma, rengolin
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70456
Summary: Remove `Worklist` iteration and make use `checkForAllUses`. There is no test chage.
Reviewers: sstefan1, jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71352
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
Summary: AutoFDO compilation has two places that do inlining - the sample profile loader that does inlining with context sensitive profile, and the regular inliner as CGSCC pass. Ideally we want most inlining to come from sample profile loader as that is driven by context sensitive profile and also retains context sensitivity after inlining. However the reality is most of the inlining actually happens during regular inliner. To track the number of inline instances from sample profile loader and help move more inlining to sample profile loader, I'm adding statistics and optimization remarks for sample profile loader's inlining.
Reviewers: wmi, davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70584
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
Soon Intrinsic::ID will be a plain integer, so this overload will not be
possible.
Rename both overloads to ensure that downstream targets observe this as
a build failure instead of a runtime failure.
Split off from D71320
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D71381
Fix for https://bugs.llvm.org/show_bug.cgi?id=40846.
This adds a combine for cases where a (a + b) < a style overflow
check is performed, but with a + b being the result of
uadd.with.overflow, so the overflow result is also already available
and we can just use it. Subsequently GVN/CSE will deduplicate the extracts.
We can run into this situation if you have both a uadd.with.overflow
and a manual add + overflow check in the same function (on the same
operands), in which case GVN will rewrite the add to the with.overflow
result and leave you with this pattern.
The implementation is a bit ugly because I'm handling the various
canonicalization edge cases.
This does not yet handle the negated version of this pattern.
Differential Revision: https://reviews.llvm.org/D58644
Fix for https://bugs.llvm.org/show_bug.cgi?id=44236. This code was
originally introduced in rG36512330041201e10f5429361bbd79b1afac1ea1.
However, the attribute copying was done in the wrong place (in general
call replacement, not thunk generation) and a proper fix was
implemented in D12581.
Previously this code was just unnecessary but harmless (because
FunctionComparator ensured that the attributes of the two functions
are exactly the same), but since byval was changed to accept a type
this copying is actively wrong and may result in malformed IR.
Differential Revision: https://reviews.llvm.org/D71173
Summary: Rollback of parts of D71213. After digging more into the code I think we should leave 0 when creating the instructions (CreateMemcpy, CreateMaskedStore, CreateMaskedLoad). It's probably fine for MemorySanitizer because Alignement is resolved but I'm having a hard time convincing myself it has no impact at all (although tests are passing).
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71332
This patch introduced the VFDatabase, the framework proposed in
http://lists.llvm.org/pipermail/llvm-dev/2019-June/133484.html. [*]
In this patch the VFDatabase is used to bridge the TargetLibraryInfo
(TLI) calls that were previously used to query for the availability of
vector counterparts of scalar functions.
The VFISAKind field `ISA` of VFShape have been moved into into VFInfo,
under the assumption that different vector ISAs may provide the same
vector signature. At the moment, the vectorizer accepts any of the
available ISAs as long as the signature provided by the VFDatabase
matches the one expected in the vectorization process. For example,
when targeting AVX or AVX2, which both have 256-bit registers, the IR
signature of the two vector functions associated to the two ISAs is
the same. The `getVectorizedFunction` method at the moment returns the
first available match. We will need to add more heuristics to the
search system to decide which of the available version (TLI, AVX,
AVX2, ...) the system should prefer, when multiple versions with the
same VFShape are present.
Some of the code in this patch is based on the work done by Sumedh
Arani in https://reviews.llvm.org/D66025.
[*] Notice that in the proposal the VFDatabase was called SVFS. The
name VFDatabase is more in line with LLVM recommendations for
naming classes and variables.
Differential Revision: https://reviews.llvm.org/D67572
This pattern is noted as a regression from:
D70246
...where we removed an over-aggressive shuffle simplification.
SimplifyDemandedVectorElts fails to catch this case when the insert has multiple uses,
so I'm proposing to pattern match the minimal sequence directly. This fold does not
conflict with any of our current shuffle undef/poison semantics.
Differential Revision: https://reviews.llvm.org/D71220
basic blocks
Originally applied in 72ce759928.
Fixed a build failure caused by incorrect use of cast instead of
dyn_cast.
This reverts commit 8b0780f795.
This attempts to teach the cost model in Arm that code such as:
%s = shl i32 %a, 3
%a = and i32 %s, %b
Can under Arm or Thumb2 become:
and r0, r1, r2, lsl #3
So the cost of the shift can essentially be free. To do this without
trying to artificially adjust the cost of the "and" instruction, it
needs to get the users of the shl and check if they are a type of
instruction that the shift can be folded into. And so it needs to have
access to the actual instruction in getArithmeticInstrCost, which if
available is added as an extra parameter much like getCastInstrCost.
We otherwise limit it to shifts with a single user, which should
hopefully handle most of the cases. The list of instruction that the
shift can be folded into include ADC, ADD, AND, BIC, CMP, EOR, MVN, ORR,
ORN, RSB, SBC and SUB. This translates to Add, Sub, And, Or, Xor and
ICmp.
Differential Revision: https://reviews.llvm.org/D70966
Currently we fail to pick the right insertion point when
PreviousLastPart of a first-order-recurrence is a PHI node not in the
LoopVectorBody. This can happen when PreviousLastPart is produce in a
predicated block. In that case, we should pick the insertion point in
the BB the PHI is in.
Fixes PR44020.
Reviewers: hsaito, fhahn, Ayal, dorit
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D71071
AssumptionCache can be null in SimplifyCFGOptions. However, FoldCondBranchOnPHI() was not properly handling that when passing a null AssumptionCache to simplifyCFG.
Patch by Rodrigo Caetano Rocha <rcor.cs@gmail.com>
Reviewers: fhahn, lebedev.ri, spatel
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D69963
The file is intended to gather various VPlan transformations, not only
CFG related transforms. Actually, the only transformation there is not
CFG related.
Reviewers: Ayal, gilr, hsaito, rengolin
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D70732
Summary:
Sample profile loader of AutoFDO tries to replay previous inlining using context sensitive profile. The replay only repeats inlining if the call site block is hot. As a result it punts inlining of small functions, some of which can be beneficial for size, and will still be inlined by CSGCC inliner later. The oscillation between sample profile loader's inlining and regular CGSSC inlining cause unnecessary loss of context-sensitive profile. It doesn't have much impact for inline decision itself, but it negatively affects post-inline profile quality as CGSCC inliner have to scale counts which is not as accurate as the original context sensitive profile, and bad post-inline profile can misguide code layout.
This change added regular Inline Cost calculation for sample profile loader, so we can inline small functions upfront under switch -sample-profile-inline-size. In addition -sample-profile-cold-inline-threshold is added so we can tune the separate size threshold - currently the default is chosen to be the same as regular inliner's cold call-site threshold.
Reviewers: wmi, davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70750
Johannes Doerfert