Summary:
This prevents the discriminator generation pass from triggering if
the DWARF version being used in the module is prior to 4.
Reviewers: echristo, dblaikie
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3413
llvm-svn: 206507
Also updated as many loops as I could find using df_begin/idf_begin -
strangely I found no uses of idf_begin. Is that just used out of tree?
Also a few places couldn't use df_begin because either they used the
member functions of the depth first iterators or had specific ordering
constraints (I added a comment in the latter case).
Based on a patch by Jim Grosbach. (Jim - you just had iterator_range<T>
where you needed iterator_range<idf_iterator<T>>)
llvm-svn: 206016
Summary:
Tested with a unit test because we don't appear to have any transforms
that use this other than ASan, I think.
Fixes PR17935.
Reviewers: nicholas
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3194
llvm-svn: 204866
This option caused LowerInvoke to generate code using SJLJ-based
exception handling, but there is no code left that interprets the
jmp_buf stack that the resulting code maintained (llvm.sjljeh.jblist).
This option has been obsolete for a while, and replaced by
SjLjEHPrepare.
This leaves the default behaviour of LowerInvoke, which is to convert
invokes to calls.
Differential Revision: http://llvm-reviews.chandlerc.com/D3136
llvm-svn: 204388
This allows us to generate table lookups for code such as:
unsigned test(unsigned x) {
switch (x) {
case 100: return 0;
case 101: return 1;
case 103: return 2;
case 105: return 3;
case 107: return 4;
case 109: return 5;
case 110: return 6;
default: return f(x);
}
}
Since cases 102, 104, etc. are not constants, the lookup table has holes
in those positions. We therefore guard the table lookup with a bitmask check.
Patch by Jasper Neumann!
llvm-svn: 203694
optimize a call to a llvm intrinsic to something that invovles a call to a C
library call, make sure it sets the right calling convention on the call.
e.g.
extern double pow(double, double);
double t(double x) {
return pow(10, x);
}
Compiles to something like this for AAPCS-VFP:
define arm_aapcs_vfpcc double @t(double %x) #0 {
entry:
%0 = call double @llvm.pow.f64(double 1.000000e+01, double %x)
ret double %0
}
declare double @llvm.pow.f64(double, double) #1
Simplify libcall (part of instcombine) will turn the above into:
define arm_aapcs_vfpcc double @t(double %x) #0 {
entry:
%__exp10 = call double @__exp10(double %x) #1
ret double %__exp10
}
declare double @__exp10(double)
The pre-instcombine code works because calls to LLVM builtins are special.
Instruction selection will chose the right calling convention for the call.
However, the code after instcombine is wrong. The call to __exp10 will use
the C calling convention.
I can think of 3 options to fix this.
1. Make "C" calling convention just work since the target should know what CC
is being used.
This doesn't work because each function can use different CC with the "pcs"
attribute.
2. Have Clang add the right CC keyword on the calls to LLVM builtin.
This will work but it doesn't match the LLVM IR specification which states
these are "Standard C Library Intrinsics".
3. Fix simplify libcall so the resulting calls to the C routines will have the
proper CC keyword. e.g.
%__exp10 = call arm_aapcs_vfpcc double @__exp10(double %x) #1
This works and is the solution I implemented here.
Both solutions #2 and #3 would work. After carefully considering the pros and
cons, I decided to implement #3 for the following reasons.
1. It doesn't change the "spec" of the intrinsics.
2. It's a self-contained fix.
There are a couple of potential downsides.
1. There could be other places in the optimizer that is broken in the same way
that's not addressed by this.
2. There could be other calling conventions that need to be propagated by
simplify-libcall that's not handled.
But for now, this is the fix that I'm most comfortable with.
llvm-svn: 203488
This requires a number of steps.
1) Move value_use_iterator into the Value class as an implementation
detail
2) Change it to actually be a *Use* iterator rather than a *User*
iterator.
3) Add an adaptor which is a User iterator that always looks through the
Use to the User.
4) Wrap these in Value::use_iterator and Value::user_iterator typedefs.
5) Add the range adaptors as Value::uses() and Value::users().
6) Update *all* of the callers to correctly distinguish between whether
they wanted a use_iterator (and to explicitly dig out the User when
needed), or a user_iterator which makes the Use itself totally
opaque.
Because #6 requires churning essentially everything that walked the
Use-Def chains, I went ahead and added all of the range adaptors and
switched them to range-based loops where appropriate. Also because the
renaming requires at least churning every line of code, it didn't make
any sense to split these up into multiple commits -- all of which would
touch all of the same lies of code.
The result is still not quite optimal. The Value::use_iterator is a nice
regular iterator, but Value::user_iterator is an iterator over User*s
rather than over the User objects themselves. As a consequence, it fits
a bit awkwardly into the range-based world and it has the weird
extra-dereferencing 'operator->' that so many of our iterators have.
I think this could be fixed by providing something which transforms
a range of T&s into a range of T*s, but that *can* be separated into
another patch, and it isn't yet 100% clear whether this is the right
move.
However, this change gets us most of the benefit and cleans up
a substantial amount of code around Use and User. =]
llvm-svn: 203364
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
llvm-svn: 203083
a bit surprising, as the class is almost entirely abstracted away from
any particular IR, however it encodes the comparsion predicates which
mutate ranges as ICmp predicate codes. This is reasonable as they're
used for both instructions and constants. Thus, it belongs in the IR
library with instructions and constants.
llvm-svn: 202838
Move the test for this class into the IR unittests as well.
This uncovers that ValueMap too is in the IR library. Ironically, the
unittest for ValueMap is useless in the Support library (honestly, so
was the ValueHandle test) and so it already lives in the IR unittests.
Mmmm, tasty layering.
llvm-svn: 202821
name might indicate, it is an iterator over the types in an instruction
in the IR.... You see where this is going.
Another step of modularizing the support library.
llvm-svn: 202815
DWARF discriminators are used to distinguish multiple control flow paths
on the same source location. When this happens, instructions across
basic block boundaries will share the same debug location.
This pass detects this situation and creates a new lexical scope to one
of the two instructions. This lexical scope is a child scope of the
original and contains a new discriminator value. This discriminator is
then picked up from MCObjectStreamer::EmitDwarfLocDirective to be
written on the object file.
This fixes http://llvm.org/bugs/show_bug.cgi?id=18270.
llvm-svn: 202752
I am really sorry for the noise, but the current state where some parts of the
code use TD (from the old name: TargetData) and other parts use DL makes it
hard to write a patch that changes where those variables come from and how
they are passed along.
llvm-svn: 201827
The crux of the issue is that LCSSA doesn't preserve stateful alias
analyses. Before r200067, LICM didn't cause LCSSA to run in the LTO pass
manager, where LICM runs essentially without any of the other loop
passes. As a consequence the globalmodref-aa pass run before that loop
pass manager was able to survive the loop pass manager and be used by
DSE to eliminate stores in the function called from the loop body in
Adobe-C++/loop_unroll (and similar patterns in other benchmarks).
When LICM was taught to preserve LCSSA it had to require it as well.
This caused it to be run in the loop pass manager and because it did not
preserve AA, the stateful AA was lost. Most of LLVM's AA isn't stateful
and so this didn't manifest in most cases. Also, in most cases LCSSA was
already running, and so there was no interesting change.
The real kicker is that LCSSA by its definition (injecting PHI nodes
only) trivially preserves AA! All we need to do is mark it, and then
everything goes back to working as intended. It probably was blocking
some other weird cases of stateful AA but the only one I have is
a 1000-line IR test case from loop_unroll, so I don't really have a good
test case here.
Hopefully this fixes the regressions on performance that have been seen
since that revision.
llvm-svn: 201104
Add the missing transformation strchr(p, 0) -> p + strlen(p) to SimplifyLibCalls
and remove the ToDo comment.
Reviewer: Duncan P.N. Exan Smith
llvm-svn: 200736
LowerExpectIntrinsic previously only understood the idiom of an expect
intrinsic followed by a comparison with zero. For llvm.expect.i1, the
comparison would be stripped by the early-cse pass.
Patch by Daniel Micay.
llvm-svn: 200664
preserve loop simplify of enclosing loops.
The problem here starts with LoopRotation which ends up cloning code out
of the latch into the new preheader it is buidling. This can create
a new edge from the preheader into the exit block of the loop which
breaks LoopSimplify form. The code tries to fix this by splitting the
critical edge between the latch and the exit block to get a new exit
block that only the latch dominates. This sadly isn't sufficient.
The exit block may be an exit block for multiple nested loops. When we
clone an edge from the latch of the inner loop to the new preheader
being built in the outer loop, we create an exiting edge from the outer
loop to this exit block. Despite breaking the LoopSimplify form for the
inner loop, this is fine for the outer loop. However, when we split the
edge from the inner loop to the exit block, we create a new block which
is in neither the inner nor outer loop as the new exit block. This is
a predecessor to the old exit block, and so the split itself takes the
outer loop out of LoopSimplify form. We need to split every edge
entering the exit block from inside a loop nested more deeply than the
exit block in order to preserve all of the loop simplify constraints.
Once we try to do that, a problem with splitting critical edges
surfaces. Previously, we tried a very brute force to update LoopSimplify
form by re-computing it for all exit blocks. We don't need to do this,
and doing this much will sometimes but not always overlap with the
LoopRotate bug fix. Instead, the code needs to specifically handle the
cases which can start to violate LoopSimplify -- they aren't that
common. We need to see if the destination of the split edge was a loop
exit block in simplified form for the loop of the source of the edge.
For this to be true, all the predecessors need to be in the exact same
loop as the source of the edge being split. If the dest block was
originally in this form, we have to split all of the deges back into
this loop to recover it. The old mechanism of doing this was
conservatively correct because at least *one* of the exiting blocks it
rewrote was the DestBB and so the DestBB's predecessors were fixed. But
this is a much more targeted way of doing it. Making it targeted is
important, because ballooning the set of edges touched prevents
LoopRotate from being able to split edges *it* needs to split to
preserve loop simplify in a coherent way -- the critical edge splitting
would sometimes find the other edges in need of splitting but not
others.
Many, *many* thanks for help from Nick reducing these test cases
mightily. And helping lots with the analysis here as this one was quite
tricky to track down.
llvm-svn: 200393
When simplifycfg moves an instruction, it must drop metadata it doesn't know
is still valid with the preconditions changes. In particular, it must drop
the range and tbaa metadata.
The patch implements this with an utility function to drop all metadata not
in a white list.
llvm-svn: 200322
LCSSA from it caused a crasher with the LoopUnroll pass.
This crasher is really nasty. We destroy LCSSA form in a suprising way.
When unrolling a loop into an outer loop, we not only need to restore
LCSSA form for the outer loop, but for all children of the outer loop.
This is somewhat obvious in retrospect, but hey!
While this seems pretty heavy-handed, it's not that bad. Fundamentally,
we only do this when we unroll a loop, which is already a heavyweight
operation. We're unrolling all of these hypothetical inner loops as
well, so their size and complexity is already on the critical path. This
is just adding another pass over them to re-canonicalize.
I have a test case from PR18616 that is great for reproducing this, but
pretty useless to check in as it relies on many 10s of nested empty
loops that get unrolled and deleted in just the right order. =/ What's
worse is that investigating this has exposed another source of failure
that is likely to be even harder to test. I'll try to come up with test
cases for these fixes, but I want to get the fixes into the tree first
as they're causing crashes in the wild.
llvm-svn: 200273
uint32.
When folding branches to common destination, the updated branch weights
can exceed uint32 by more than factor of 2. We should keep halving the
weights until they can fit into uint32.
llvm-svn: 200262
the loops in a function, and teach LICM to work in the presance of
LCSSA.
Previously, LCSSA was a loop pass. That made passes requiring it also be
loop passes and unable to depend on function analysis passes easily. It
also caused outer loops to have a different "canonical" form from inner
loops during analysis. Instead, we go into LCSSA form and preserve it
through the loop pass manager run.
Note that this has the same problem as LoopSimplify that prevents
enabling its verification -- loop passes which run at the end of the loop
pass manager and don't preserve these are valid, but the subsequent loop
pass runs of outer loops that do preserve this pass trigger too much
verification and fail because the inner loop no longer verifies.
The other problem this exposed is that LICM was completely unable to
handle LCSSA form. It didn't preserve it and it actually would give up
on moving instructions in many cases when they were used by an LCSSA phi
node. I've taught LICM to support detecting LCSSA-form PHI nodes and to
hoist and sink around them. This may actually let LICM fire
significantly more because we put everything into LCSSA form to rotate
the loop before running LICM. =/ Now LICM should handle that fine and
preserve it correctly. The down side is that LICM has to require LCSSA
in order to preserve it. This is just a fact of life for LCSSA. It's
entirely possible we should completely remove LCSSA from the optimizer.
The test updates are essentially accomodating LCSSA phi nodes in the
output of LICM, and the fact that we now completely sink every
instruction in ashr-crash below the loop bodies prior to unrolling.
With this change, LCSSA is computed only three times in the pass
pipeline. One of them could be removed (and potentially a SCEV run and
a separate LoopPassManager entirely!) if we had a LoopPass variant of
InstCombine that ran InstCombine on the loop body but refused to combine
away LCSSA PHI nodes. Currently, this also prevents loop unrolling from
being in the same loop pass manager is rotate, LICM, and unswitch.
There is one thing that I *really* don't like -- preserving LCSSA in
LICM is quite expensive. We end up having to re-run LCSSA twice for some
loops after LICM runs because LICM can undo LCSSA both in the current
loop and the parent loop. I don't really see good solutions to this
other than to completely move away from LCSSA and using tools like
SSAUpdater instead.
llvm-svn: 200067
function and a FunctionPass.
This has many benefits. The motivating use case was to be able to
compute function analysis passes *after* running LoopSimplify (to avoid
invalidating them) and then to run other passes which require
LoopSimplify. Specifically passes like unrolling and vectorization are
critical to wire up to BranchProbabilityInfo and BlockFrequencyInfo so
that they can be profile aware. For the LoopVectorize pass the only
things in the way are LoopSimplify and LCSSA. This fixes LoopSimplify
and LCSSA is next on my list.
There are also a bunch of other benefits of doing this:
- It is now very feasible to make more passes *preserve* LoopSimplify
because they can simply run it after changing a loop. Because
subsequence passes can assume LoopSimplify is preserved we can reduce
the runs of this pass to the times when we actually mutate a loop
structure.
- The new pass manager should be able to more easily support loop passes
factored in this way.
- We can at long, long last observe that LoopSimplify is preserved
across SCEV. This *halves* the number of times we run LoopSimplify!!!
Now, getting here wasn't trivial. First off, the interfaces used by
LoopSimplify are all over the map regarding how analysis are updated. We
end up with weird "pass" parameters as a consequence. I'll try to clean
at least some of this up later -- I'll have to have it all clean for the
new pass manager.
Next up I discovered a really frustrating bug. LoopUnroll *claims* to
preserve LoopSimplify. That's actually a lie. But the way the
LoopPassManager ends up running the passes, it always ran LoopSimplify
on the unrolled-into loop, rectifying this oversight before any
verification could kick in and point out that in fact nothing was
preserved. So I've added code to the unroller to *actually* simplify the
surrounding loop when it succeeds at unrolling.
The only functional change in the test suite is that we now catch a case
that was previously missed because SCEV and other loop transforms see
their containing loops as simplified and thus don't miss some
opportunities. One test case has been converted to check that we catch
this case rather than checking that we miss it but at least don't get
the wrong answer.
Note that I have #if-ed out all of the verification logic in
LoopSimplify! This is a temporary workaround while extracting these bits
from the LoopPassManager. Currently, there is no way to have a pass in
the LoopPassManager which preserves LoopSimplify along with one which
does not. The LPM will try to verify on each loop in the nest that
LoopSimplify holds but the now-Function-pass cannot distinguish what
loop is being verified and so must try to verify all of them. The inner
most loop is clearly no longer simplified as there is a pass which
didn't even *attempt* to preserve it. =/ Once I get LCSSA out (and maybe
LoopVectorize and some other fixes) I'll be able to re-enable this check
and catch any places where we are still failing to preserve
LoopSimplify. If this causes problems I can back this out and try to
commit *all* of this at once, but so far this seems to work and allow
much more incremental progress.
llvm-svn: 199884
There has been an old FIXME to find the right cut-off for when it's worth
analyzing and potentially transforming a switch to a lookup table.
The switches always have two or more cases. I could not measure any speed-up
by transforming a switch with two cases. A switch with three cases gets a nice
speed-up, and I couldn't measure any compile-time regression, so I think this
is the right threshold.
In a Clang self-host, this causes 480 new switches to be transformed,
and reduces the final binary size with 8 KB.
llvm-svn: 199294
can be used by both the new pass manager and the old.
This removes it from any of the virtual mess of the pass interfaces and
lets it derive cleanly from the DominatorTreeBase<> template. In turn,
tons of boilerplate interface can be nuked and it turns into a very
straightforward extension of the base DominatorTree interface.
The old analysis pass is now a simple wrapper. The names and style of
this split should match the split between CallGraph and
CallGraphWrapperPass. All of the users of DominatorTree have been
updated to match using many of the same tricks as with CallGraph. The
goal is that the common type remains the resulting DominatorTree rather
than the pass. This will make subsequent work toward the new pass
manager significantly easier.
Also in numerous places things became cleaner because I switched from
re-running the pass (!!! mid way through some other passes run!!!) to
directly recomputing the domtree.
llvm-svn: 199104
directory. These passes are already defined in the IR library, and it
doesn't make any sense to have the headers in Analysis.
Long term, I think there is going to be a much better way to divide
these matters. The dominators code should be fully separated into the
abstract graph algorithm and have that put in Support where it becomes
obvious that evn Clang's CFGBlock's can use it. Then the verifier can
manually construct dominance information from the Support-driven
interface while the Analysis library can provide a pass which both
caches, reconstructs, and supports a nice update API.
But those are very long term, and so I don't want to leave the really
confusing structure until that day arrives.
llvm-svn: 199082
case when the lookup table doesn't have any holes.
This means we can build a lookup table for switches like this:
switch (x) {
case 0: return 1;
case 1: return 2;
case 2: return 3;
case 3: return 4;
default: exit(1);
}
The default case doesn't yield a constant result here, but that doesn't matter,
since a default result is only necessary for filling holes in the lookup table,
and this table doesn't have any holes.
This makes us transform 505 more switches in a clang bootstrap, and shaves 164 KB
off the resulting clang binary.
llvm-svn: 199025
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
llvm-svn: 198685
Now with a fix for PR18384: ValueHandleBase::ValueIsDeleted.
We need to invalidate SCEV's loop info when we delete a block, even if no values are hoisted.
llvm-svn: 198631
This commit was the source of crasher PR18384:
While deleting: label %for.cond127
An asserting value handle still pointed to this value!
UNREACHABLE executed at llvm/lib/IR/Value.cpp:671!
Reverting to get the builders green, feel free to re-land after fixing up.
(Renato has a handy isolated repro if you need it.)
This reverts commit r198478.
llvm-svn: 198503
getSCEV for an ashr instruction creates an intermediate zext
expression when it truncates its operand.
The operand is initially inside the loop, so the narrow zext
expression has a non-loop-invariant loop disposition.
LoopSimplify then runs on an outer loop, hoists the ashr operand, and
properly invalidate the SCEVs that are mapped to value.
The SCEV expression for the ashr is now an AddRec with the hoisted
value as the now loop-invariant start value.
The LoopDisposition of this wide value was properly invalidated during
LoopSimplify.
However, if we later get the ashr SCEV again, we again try to create
the intermediate zext expression. We get the same SCEV that we did
earlier, and it is still cached because it was never mapped to a
Value. When we try to create a new AddRec we abort because we're using
the old non-loop-invariant LoopDisposition.
I don't have a solution for this other than to clear LoopDisposition
when LoopSimplify hoists things.
I think the long-term strategy should be to perform LoopSimplify on
all loops before computing SCEV and before running any loop opts on
individual loops. It's possible we may want to rerun LoopSimplify on
individual loops, but it should rarely do anything, so rarely require
invalidating SCEV.
llvm-svn: 198478
Split sadd.with.overflow into add + sadd.with.overflow to allow
analysis and optimization. This should ideally be done after
InstCombine, which can perform code motion (eventually indvars should
run after all canonical instcombines). We want ISEL to recombine the
add and the check, at least on x86.
This is currently under an option for reducing live induction
variables: -liv-reduce. The next step is reducing liveness of IVs that
are live out of the overflow check paths. Once the related
optimizations are fully developed, reviewed and tested, I do expect
this to become default.
llvm-svn: 197926
Summary:
Before this change the instrumented code before Ret instructions looked like:
<Unpoison Frame Redzones>
if (Frame != OriginalFrame) // I.e. Frame is fake
<Poison Complete Frame>
Now the instrumented code looks like:
if (Frame != OriginalFrame) // I.e. Frame is fake
<Poison Complete Frame>
else
<Unpoison Frame Redzones>
Reviewers: eugenis
Reviewed By: eugenis
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2458
llvm-svn: 197907
If we happen to eliminate every case in a switch that has branch
weights, we currently try to create metadata for the one remaining
branch, triggering an assert. Instead, we need to check that the
metadata we're trying to create is sensible.
llvm-svn: 197791
Currently SplitBlockAndInsertIfThen requires that branch condition is an
Instruction itself, which is very inconvenient, because it is sometimes an
Operator, or even a Constant.
llvm-svn: 197677
This avoids creating branch weight metadata of length one when we fold
cases into the default of a switch instruction, which was triggering
an assert.
llvm-svn: 196845
Before this change, inlining one "invoke" into an outer "invoke" call
site can lead to the outer landingpad's catch/filter clauses being
copied multiple times into the resulting landingpad. This happens:
* when the inlined function contains multiple "resume" instructions,
because forwardResume() copies the clauses but is called multiple
times;
* when the inlined function contains a "resume" and a "call", because
HandleCallsInBlockInlinedThroughInvoke() copies the clauses but is
redundant with forwardResume().
Fix this by deduplicating the code.
This problem doesn't lead to any incorrect execution; it's only
untidy.
This change will make fixing PR17872 a little easier.
llvm-svn: 196710
Summary:
Rewrite asan's stack frame layout.
First, most of the stack layout logic is moved into a separte file
to make it more testable and (potentially) useful for other projects.
Second, make the frames more compact by using adaptive redzones
(smaller for small objects, larger for large objects).
Third, try to minimized gaps due to large alignments (this is hypothetical since
today we don't see many stack vars aligned by more than 32).
The frames indeed become more compact, but I'll still need to run more benchmarks
before committing, but I am sking for review now to get early feedback.
This change will be accompanied by a trivial change in compiler-rt tests
to match the new frame sizes.
Reviewers: samsonov, dvyukov
Reviewed By: samsonov
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2324
llvm-svn: 196568
lowering only for load/stores to scalar allocas. The resulting values
confuse the backend and don't add anything because we can describe
array-allocas with a dbg.declare intrinsic just fine.
rdar://problem/15464571
llvm-svn: 195052
Generally speaking, control flow paths with error reporting calls are cold.
So far, error reporting calls are calls to perror and calls to fprintf,
fwrite, etc. with stderr as the stream. This can be extended in the future.
The primary motivation is to improve block placement (the cold attribute
affects the static branch prediction heuristics).
llvm-svn: 194943
This adds an SimplifyLibCalls case which converts the special __sinpi and
__cospi (float & double variants) into a __sincospi_stret where appropriate to
remove duplicated work.
Patch by Tim Northover
llvm-svn: 193943
Given that backend does not handle "invoke asm" correctly ("invoke asm" will be
handled by SelectionDAGBuilder::visitInlineAsm, which does not have the right
setup for LPadToCallSiteMap) and we already made the assumption that inline asm
does not throw in InstCombiner::visitCallSite, we are going to make the same
assumption in Inliner to make sure we don't convert "call asm" to "invoke asm".
If it becomes necessary to add support for "invoke asm" later on, we will need
to modify the backend as well as remove the assumptions that inline asm does
not throw.
Fix rdar://15317907
llvm-svn: 193808
This patch teaches GlobalStatus to analyze a call that uses the global value as
a callee, not as an argument.
With this change internalize call handle the common use of linkonce_odr
functions. This reduces the number of linkonce_odr functions in a LTO build of
clang (checked with the emit-llvm gold plugin option) from 1730 to 60.
llvm-svn: 193436
When a linkonce_odr value that is on the dso list is not unnamed_addr
we can still look to see if anything is actually using its address. If
not, it is safe to hide it.
This patch implements that by moving GlobalStatus to Transforms/Utils
and using it in Internalize.
llvm-svn: 193090
A landing pad can be jumped to only by the unwind edge of an invoke
instruction. If we eliminate a partially redundant load in a landing pad, it
will create a basic block that violates this constraint. It then leads to other
problems down the line if it tries to merge that basic block with the landing
pad. Avoid this by not eliminating the load in a landing pad.
PR17621
llvm-svn: 193064
One optimization simplify-cfg performs is the converting of switches to
lookup tables if the switch has > 4 cases. This is done by:
1. Finding the max/min case value and calculating the switch case range.
2. Create a lookup table basic block.
3. Perform a check in the switch's BB to see if the input value is in
the switch's case range. If the input value satisfies said predicate
branch to the lookup table BB, otherwise branch to the switch's default
destination BB using the default value as the result.
The conditional check consists of subtracting the min case value of the
table from any input iN value and then ensuring that said value is
unsigned less than the size of the lookup table represented as an iN
value.
If the lookup table is a covered lookup table, the size of the table will be N
which is 0 as an iN value. Thus the comparison will be an `icmp ult` of an iN
value against 0 which is always false yielding the incorrect result.
This patch fixes this problem by recognizing if we have a covered lookup table
and if we do, unconditionally jumps to the lookup table BB since the covering
property of the lookup table implies no input values could not be handled by
said BB.
rdar://15268442
llvm-svn: 193045
If the predecessor's being spliced into a landing pad, then we need the PHIs to
come first and the rest of the predecessor's code to come *after* the landing
pad instruction.
llvm-svn: 193035
UpdatePHINodes has an optimization to reuse an existing PHI node, where it
first deletes all of its entries and then replaces them. Unfortunately, in the
case where we had duplicate predecessors (which are allowed so long as the
associated PHI entries have the same value), the loop removing the existing PHI
entries from the to-be-reused PHI would assert (if that PHI was not the one
which had the duplicates).
llvm-svn: 192001
infrastructure.
This was essentially work toward PGO based on a design that had several
flaws, partially dating from a time when LLVM had a different
architecture, and with an effort to modernize it abandoned without being
completed. Since then, it has bitrotted for several years further. The
result is nearly unusable, and isn't helping any of the modern PGO
efforts. Instead, it is getting in the way, adding confusion about PGO
in LLVM and distracting everyone with maintenance on essentially dead
code. Removing it paves the way for modern efforts around PGO.
Among other effects, this removes the last of the runtime libraries from
LLVM. Those are being developed in the separate 'compiler-rt' project
now, with somewhat different licensing specifically more approriate for
runtimes.
llvm-svn: 191835
Diego Novillo