Clean up ahead of a patch to fix bugs in the AMDGPUDisassembler.
Use lit.local.cfg substitutions and more idiomatic use of split-file to
simplify and extend existing kernel-descriptor disassembly tests.
Add a comment to AMDHSAKernelDescriptor.h, as at least one small set
towards keeping all kernel-descriptor sensitive code in sync.
Reviewed By: kzhuravl, arsenm
Differential Revision: https://reviews.llvm.org/D130105
Due to the encoding changes in GFX11, we had a hack in place that
disables the use of VGPRs above 128. This patch removes the need for
that hack.
We introduce a new register class VGPR_32_Lo128 which is used for 16-bit
operands of VOP1, VOP2, and VOPC instructions. This register class only has the
low 128 VGPRs, but is otherwise identical to VGPR_32. Therefore, 16-bit VOP1,
VOP2, and VOPC instructions are correctly limited to use the first 128
VGPRs, while the other instructions can freely use all 256.
We introduce new pseduo-instructions used on GFX11 which have the suffix
t16 (True 16) to use the VGPR_32_Lo128 register class.
Reviewed By: foad, rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D133723
VOPD is a new encoding for dual-issue instructions for use in wave32.
This patch includes MC layer support only.
A VOPD instruction is constituted of an X component (for which there are
13 possible opcodes) and a Y component (for which there are the 13 X
opcodes plus 3 more). Most of the complexity in defining and parsing
a VOPD operation arises from the possible different total numbers of
operands and deferred parsing of certain operands depending on the
constituent X and Y opcodes.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D128218
Supports encoding existing instrutions on gfx11 and MC support for the new VOPC
dpp instructions.
Patch 19/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126978
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126989
Includes dpp versions of VOP3P instructions.
Patch 18/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126917
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126978
There was an issue with encoding wide (>64 bit) instructions on
BigEndian hosts, which is fixed in D127195. Therefore reland this.
gfx11 adds the ability to use dpp modifiers on vop3 instructions.
This patch adds machine code layer support for that. The MCCodeEmitter
is changed to use APInt instead of uint64_t to support these wider
instructions.
Patch 16/N for upstreaming of AMDGPU gfx11 architecture
Differential Revision: https://reviews.llvm.org/D126483
gfx11 adds the ability to use dpp modifiers on vop3 instructions.
This patch adds machine code layer support for that. The MCCodeEmitter
is changed to use APInt instead of uint64_t to support these wider
instructions.
Patch 16/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126475
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126483
MCSymbolizer::tryAddingSymbolicOperand() overloaded the Size parameter
to specify either the instruction size or the operand size depending on
the architecture. However, for proper symbolic disassembly on X86, we
need to know both sizes, as an instruction can have two operands, and
the instruction size cannot be reliably calculated based on the operand
offset and its size. Hence, split Size into OpSize and InstSize.
For X86, the new interface allows to fix a couple of issues:
* Correctly adjust the value of PC-relative operands.
* Set operand size to zero when the operand is specified implicitly.
Differential Revision: https://reviews.llvm.org/D126101
A new instruction encoding. Some of these instructions were previously VOP3
encoded.
Contributors:
Carl Ritson <carl.ritson@amd.com>
Patch 11/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D125824
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D125989
Includes MachineCode layer support and tests, and MIR tests not requiring
CodeGen pass changes.
Includes a small change in SMInstructions.td to correct encoded bits.
Contributors:
Petar Avramovic <Petar.Avramovic@amd.com>
Dmitry Preobrazhensky <dmitry.preobrazhensky@amd.com>
Depends on D125316
Patch 6/N for upstreaming of AMDGPU gfx11 architecture.
Reviewed By: dp, Petar.Avramovic
Differential Revision: https://reviews.llvm.org/D125319
Refactor to pass a templatized size parameter to the decoder to allow wider than
64bit decodes in a later patch.
Contributors:
Jay Foad <jay.foad@amd.com>
Depends on D125261
Patch 5/N for upstreaming of AMDGPU gfx11 architecture.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D125316
These instructions should allow src0 to be a literal with the same
value as the mandatory other literal. Enable it by introducing an
operand that defers adding its value to the MI when decoding till
the mandatory literal is parsed.
Reviewed By: dp, foad
Differential Revision: https://reviews.llvm.org/D111067
Change-Id: I22b0ae0d35bad17b6f976808e48bffe9a6af70b7
1. Add an accessor function to MCSymbolizer to retrieve addresses
referenced by a symbolizable operand, but not resolved to a symbol.
That way, the caller can synthesize labels at those addresses and
then retry disassembling the section.
2. Implement that in AMDGPU -- a failed symbol lookup results in the
address being added to a vector returned by the new function.
3. Use that in llvm-objdump when using MCSymbolizer (which only happens
on AMDGPU) and SymbolizeOperands is on.
Differential Revision: https://reviews.llvm.org/D101145
Change-Id: I19087c3bbfece64bad5a56ee88bcc9110d83989e
It's more future-proof to use isGFX10Plus from the start, on the
assumption that future architectures will be based on current
architectures.
Also make use of the existing isGFX9Plus in a few places.
Differential Revision: https://reviews.llvm.org/D92092
The argument is llvm::null() everywhere except llvm::errs() in
llvm-objdump in -DLLVM_ENABLE_ASSERTIONS=On builds. It is used by no
target but X86 in -DLLVM_ENABLE_ASSERTIONS=On builds.
If we ever have the needs to add verbose log to disassemblers, we can
record log with a member function, instead of passing it around as an
argument.
Keep it optional in cases this is ever needed in some global
context. Currently it's only used for getting an upper bound inline
asm code size.
For AMDGPU, gfx10 increases the maximum instruction size to
20-bytes. This avoids penalizing older subtargets when estimating code
size, and making some annoying branch relaxation test adjustments.
llvm-svn: 361405
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Stores failed to decode at all since they didn't have a
DecoderNamespace set. Loads worked, but did not change
the register width displayed to match the numbmer of
enabled channels.
The number of printed registers for vaddr is still wrong,
but I don't think that's encoded in the instruction so
there's not much we can do about that.
Image atomics are still broken. MIMG is the same
encoding for SI/VI, but the image atomic classes
are split up into encoding specific versions unlike
every other MIMG instruction. They have isAsmParserOnly
set on them for some reason. dmask is also special for
these, so we probably should not have it as an explicit
operand as it is now.
llvm-svn: 320614
Summary: Previously there were two separate pseudo instruction for SDWA on VI and on GFX9. Created one pseudo instruction that is union of both of them. Added verifier to check that operands conform either VI or GFX9.
Reviewers: dp, arsenm, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, artem.tamazov
Differential Revision: https://reviews.llvm.org/D34026
llvm-svn: 305886
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Fangrui Song