necessary to swap the operands to handle NaN and negative zero properly.
Also, reintroduce logic for checking for NaN conditions when forming
SSE min and max instructions, fixed to take into consideration NaNs and
negative zeros. This allows forming min and max instructions in more
cases.
llvm-svn: 97025
during a tail call. A parameter might overwrite this stack slot during the tail
call.
The sequence during a tail call is:
1.) load return address to temp reg
2.) move parameters (might involve storing to return address stack slot)
3.) store return address to new location from temp reg
If the stack location is marked immutable CodeGen can colocate load (1) with the
store (3).
This fixes bug 6225.
llvm-svn: 96783
SSE min and max instructions. The real thing this code needs to be
concerned about is negative zero.
Update the sse-minmax.ll test accordingly, and add tests for
-enable-unsafe-fp-math mode as well.
llvm-svn: 96775
create an X86ISD::Cmp node with result type i64 on the
CodeGen/X86/shift-i256.ll testcase and the new isel was assert on it
downstream.
llvm-svn: 96768
dragonegg self-host build. I reverted 96640 in order to revert
96556 (96640 goes on top of 96556), but it also looks like with
both of them applied the breakage happens even earlier. The
symptom of the 96556 miscompile is the following crash:
llvm[3]: Compiling AlphaISelLowering.cpp for Release build
cc1plus: /home/duncan/tmp/tmp/llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp:4982: void llvm::SelectionDAG::ReplaceAllUsesWith(llvm::SDNode*, llvm::SDNode*, llvm::SelectionDAG::DAGUpdateListener*): Assertion `(!From->hasAnyUseOfValue(i) || From->getValueType(i) == To->getValueType(i)) && "Cannot use this version of ReplaceAllUsesWith!"' failed.
Stack dump:
0. Running pass 'X86 DAG->DAG Instruction Selection' on function '@_ZN4llvm19AlphaTargetLowering14LowerOperationENS_7SDValueERNS_12SelectionDAGE'
g++: Internal error: Aborted (program cc1plus)
This occurs when building LLVM using LLVM built by LLVM (via
dragonegg). Probably LLVM has miscompiled itself, though it
may have miscompiled GCC and/or dragonegg itself: at this point
of the self-host build, all of GCC, LLVM and dragonegg were built
using LLVM. Unfortunately this kind of thing is extremely hard
to debug, and while I did rummage around a bit I didn't find any
smoking guns, aka obviously miscompiled code.
Found by bisection.
r96556 | evancheng | 2010-02-18 03:13:50 +0100 (Thu, 18 Feb 2010) | 5 lines
Some dag combiner goodness:
Transform br (xor (x, y)) -> br (x != y)
Transform br (xor (xor (x,y), 1)) -> br (x == y)
Also normalize (and (X, 1) == / != 1 -> (and (X, 1)) != / == 0 to match to "test on x86" and "tst on arm"
r96640 | evancheng | 2010-02-19 01:34:39 +0100 (Fri, 19 Feb 2010) | 16 lines
Transform (xor (setcc), (setcc)) == / != 1 to
(xor (setcc), (setcc)) != / == 1.
e.g. On x86_64
%0 = icmp eq i32 %x, 0
%1 = icmp eq i32 %y, 0
%2 = xor i1 %1, %0
br i1 %2, label %bb, label %return
=>
testl %edi, %edi
sete %al
testl %esi, %esi
sete %cl
cmpb %al, %cl
je LBB1_2
llvm-svn: 96672
If there exists a use of a build_vector that's the bitwise complement of the mask,
then transform the node to
(and (xor x, (build_vector -1,-1,-1,-1)), (build_vector ~c1,~c2,~c3,~c4)).
Since this transformation is only useful when 1) the given build_vector will
become a load from constpool, and 2) (and (xor x -1), y) matches to a single
instruction, I decided this is appropriate as a x86 specific transformation.
rdar://7323335
llvm-svn: 96389
lowering and requires that certain types exist in ValueTypes.h. Modified widening to
check if an op can trap and if so, the widening algorithm will apply only the op on
the defined elements. It is safer to do this in widening because the optimizer can't
guarantee removing unused ops in some cases.
llvm-svn: 95823
where callee's arguments are already in the caller's own caller's stack and
they line up perfectly. e.g.
extern int foo(int a, int b, int c);
int bar(int a, int b, int c) {
return foo(a, b, c);
}
llvm-svn: 95053
even when -tailcallopt is not specified and it does not require changing ABI.
First case is the most trivial one. Perform tail call optimization when both
the caller and callee do not return values and when the callee does not take
any input arguments.
llvm-svn: 94664
Target independent isel should always pass along the "tail call" property. Change
target hook LowerCall's parameter "isTailCall" into a refernce. If the target
decides it's impossible to honor the tail call request, it should set isTailCall
to false to make target independent isel happy.
llvm-svn: 94626
which is more convenient, and change getPICJumpTableRelocBaseExpr
to take a MachineFunction to match.
Next, move the X86 code that create a PICBase symbol to
X86TargetLowering::getPICBaseSymbol from
X86MCInstLower::GetPICBaseSymbol, which was an asmprinter specific
library. This eliminates a 'gross hack', and allows us to
implement X86ISelLowering::getPICJumpTableRelocBaseExpr which now
calls it.
This in turn allows us to eliminate the
X86AsmPrinter::printPICJumpTableSetLabel method, which was the
only overload of printPICJumpTableSetLabel.
llvm-svn: 94526
jump table entry kind, instead of overloading
AsmPrinter::printPICJumpTableEntry.
This has a pretty horrible and inefficient FIXME around how @GOTOFF
is currently smashed into the mcsymbol name, but otherwise this is
much cleaner.
llvm-svn: 94516
- getToken is modeled after StringRef::split but it can split on multiple
separator chars and skips leading seperators.
- SplitString is a StringRef::split variant for more than 2 elements with the
same behaviour as getToken.
llvm-svn: 93161
R11, and then asserting that the target was in R9. Since R9 isn't reserved for
the target anymore, and is used as an argument, this patch changes the
assertion.
llvm-svn: 93065
(OP (trunc x), (trunc y)) -> (trunc (OP x, y))
Unfortunately this simple change causes dag combine to infinite looping. The problem is the shrink demanded ops optimization tend to canonicalize expressions in the opposite manner. That is badness. This patch disable those optimizations in dag combine but instead it is done as a late pass in sdisel.
This also exposes some deficiencies in dag combine and x86 setcc / brcond lowering. Teach them to look pass ISD::TRUNCATE in various places.
llvm-svn: 92849
(or (x << c) | (y >> (64 - c))) ==> (shld64 x, y, c)
The isel patterns may not catch all the cases if general dag combine has reduced width of source operands.
llvm-svn: 92513
return partial registers. This affected the back-end lowering code some.
Also patch up some places I missed before in the "get" functions.
llvm-svn: 91880
incrementing the simple value type of the 16-bit type, which would give the
wrong type if an intemediate MVT (such as i24) were introduced.
llvm-svn: 91602
Note that "hasDotLocAndDotFile"-style debug info was already broken;
people wanting this functionality should implement it in the
AsmPrinter/DwarfWriter code.
llvm-svn: 89711
The large code model is documented at
http://www.x86-64.org/documentation/abi.pdf and says that calls should
assume their target doesn't live within the 32-bit pc-relative offset
that fits in the call instruction.
To do this, we turn off the global-address->target-global-address
conversion in X86TargetLowering::LowerCall(). The first attempt at
this broke the lazy JIT because it can separate the movabs(imm->reg)
from the actual call instruction. The lazy JIT receives the address of
the movabs as a relocation and needs to record the return address from
the call; and then when that call happens, it needs to patch the
movabs with the newly-compiled target. We could thread the call
instruction into the relocation and record the movabs<->call mapping
explicitly, but that seems to require at least as much new
complication in the code generator as this change.
To fix this, we make lazy functions _always_ go through a call
stub. You'd think we'd only have to force lazy calls through a stub on
difficult platforms, but that turns out to break indirect calls
through a function pointer. The right fix for that is to distinguish
between calls and address-of operations on uncompiled functions, but
that's complex enough to leave for someone else to do.
Another attempt at this defined a new CALL64i pseudo-instruction,
which expanded to a 2-instruction sequence in the assembly output and
was special-cased in the X86CodeEmitter's emitInstruction()
function. That broke indirect calls in the same way as above.
This patch also removes a hack forcing Darwin to the small code model.
Without far-call-stubs, the small code model requires things of the
JITMemoryManager that the DefaultJITMemoryManager can't provide.
Thanks to echristo for lots of testing!
llvm-svn: 88984
slots. The AsmPrinter will use this information to determine whether to
print a spill/reload comment.
Remove default argument values. It's too easy to pass a wrong argument
value when multiple arguments have default values. Make everything
explicit to trap bugs early.
Update all targets to adhere to the new interfaces..
llvm-svn: 87022
1. rename the movhp patfrag to movlhps, since thats what it actually matches
2. eliminate the bogus movhps load and store patterns, they were incorrect. The load transforms are already handled (correctly) by shufps/unpack.
3. revert a recent test change to its correct form.
llvm-svn: 86415
encounters an OEQ or UNE comparison, and update its callers to check
for this return status and recover. This fixes a problem resulting from
the LowerOperation hooks being called from LegalizeVectorOps, because
LegalizeVectorOps only lowers vectors, so OEQ and UNE comparisons may
still be at large. This fixes PR5092.
llvm-svn: 84640
stack slots and giving them different PseudoSourceValue's did not fix the
problem of post-alloc scheduling miscompiling llvm itself.
- Apply Dan's conservative workaround by assuming any non fixed stack slots can
alias other memory locations. This means a load from spill slot #1 cannot
move above a store of spill slot #2.
- Enable post-alloc scheduling for x86 at optimization leverl Default and above.
llvm-svn: 84424
it to hold the address of an sret return value, for x86-64 ABI purposes.
Also, fix the test that was originally intended to test this to actually
test it, using FileCheck.
llvm-svn: 83853
- Allocate MachineMemOperands and MachineMemOperand lists in MachineFunctions.
This eliminates MachineInstr's std::list member and allows the data to be
created by isel and live for the remainder of codegen, avoiding a lot of
copying and unnecessary translation. This also shrinks MemSDNode.
- Delete MemOperandSDNode. Introduce MachineSDNode which has dedicated
fields for MachineMemOperands.
- Change MemSDNode to have a MachineMemOperand member instead of its own
fields with the same information. This introduces some redundancy, but
it's more consistent with what MachineInstr will eventually want.
- Ignore alignment when searching for redundant loads for CSE, but remember
the greatest alignment.
Target-specific code which previously used MemOperandSDNodes with generic
SDNodes now use MemIntrinsicSDNodes, with opcodes in a designated range
so that the SelectionDAG framework knows that MachineMemOperand information
is available.
llvm-svn: 82794
Evan Cheng