As raised by @nlopes on D90382 - if this is not a rotate then the select was blocking poison from the 'shift-by-zero' non-TVal, but a funnel shift won't - so freeze it.
This is the last of the rotate->funnel shift InstCombine generalizations for PR46896
We still have foldGuardedRotateToFunnelShift to deal with in AggressiveInstCombine
Differential Revision: https://reviews.llvm.org/D90382
When retrying the "simplify with operand replaced" select
optimization without poison flags, also handle inbounds on GEPs.
Of course, this particular example would also be safe to transform
while keeping inbounds, but the underlying machinery does not
know this (yet).
When replacing X == Y ? f(X) : Z with X == Y ? f(Y) : Z, make sure
that Y cannot be undef. If it may be undef, we might end up picking
a different value for undef in the comparison and the select
operand.
Enable canonicalization of SPF_ABS and SPF_NABS to the abs intrinsic.
To be conservative, the one-use check on the comparison is retained,
this may be relaxed if all goes well.
It's pretty likely that this will uncover places that missing
handling for the abs() intrinsic. Please report any seen performance
regressions.
Differential Revision: https://reviews.llvm.org/D87188
Reapply after fixing SimplifyWithOpReplaced() to never return
the original value, which would lead to an infinite loop in this
transform.
-----
For selects of the type X == Y ? A : B, check if we can simplify A
by using the X == Y equality and replace the operand if that's
possible. We already try to do this in InstSimplify, but will only
fold if the result of the simplification is the same as B, in which
case the select can be dropped entirely. Here the select will be
retained, just one operand simplified.
As we are performing an actual replacement here, we don't have
problems with refinement / poison values.
Differential Revision: https://reviews.llvm.org/D87480
For selects of the type X == Y ? A : B, check if we can simplify A
by using the X == Y equality and replace the operand if that's
possible. We already try to do this in InstSimplify, but will only
fold if the result of the simplification is the same as B, in which
case the select can be dropped entirely. Here the select will be
retained, just one operand simplified.
As we are performing an actual replacement here, we don't have
problems with refinement / poison values.
Differential Revision: https://reviews.llvm.org/D87480
This is a followup to D86834, which partially fixed this issue in
InstSimplify. However, InstCombine repeats the same transform while
dropping poison flags -- which does not cover cases where poison is
introduced in some other way.
The fix here is a bit more comprehensive, because things are quite
entangled, and it's hard to only partially address it without
regressing optimization. There are really two changes here:
* Export the SimplifyWithOpReplaced API from InstSimplify, with an
added AllowRefinement flag. For replacements inside the TrueVal
we don't actually care whether refinement occurs or not, the
replacement is always legal. This part of the transform is now
done in InstSimplify only. (It should be noted that the current
AllowRefinement check is not sufficient -- that's an issue we
need to address separately.)
* Change the InstCombine fold to work by temporarily dropping
poison generating flags, running the fold and then restoring the
flags if it didn't work out. This will ensure that the InstCombine
fold is correct as long as the InstSimplify fold is correct.
Differential Revision: https://reviews.llvm.org/D87445
This patch adds an optimization that folds select(freeze(icmp eq/ne x, y), x, y)
to x or y.
This was needed to resolve slowdown after D84940 is applied.
I tried to bake this logic into foldSelectInstWithICmp, but it wasn't clear.
This patch conservatively writes the pattern in a separate function,
foldSelectWithFrozenICmp.
The output does not need freeze; https://alive2.llvm.org/ce/z/X49hNE (from @nikic)
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D85533
For a long time, the InstCombine pass handled target specific
intrinsics. Having target specific code in general passes was noted as
an area for improvement for a long time.
D81728 moves most target specific code out of the InstCombine pass.
Applying the target specific combinations in an extra pass would
probably result in inferior optimizations compared to the current
fixed-point iteration, therefore the InstCombine pass resorts to newly
introduced functions in the TargetTransformInfo when it encounters
unknown intrinsics.
The patch should not have any effect on generated code (under the
assumption that code never uses intrinsics from a foreign target).
This introduces three new functions:
TargetTransformInfo::instCombineIntrinsic
TargetTransformInfo::simplifyDemandedUseBitsIntrinsic
TargetTransformInfo::simplifyDemandedVectorEltsIntrinsic
A few target specific parts are left in the InstCombine folder, where
it makes sense to share code. The largest left-over part in
InstCombineCalls.cpp is the code shared between arm and aarch64.
This allows to move about 3000 lines out from InstCombine to the targets.
Differential Revision: https://reviews.llvm.org/D81728
```
define i32 @test(i1 %cond) {
entry:
br i1 %cond, label %exit, label %exit
exit:
%result = select i1 %cond, i32 123, i32 456
ret i32 %result
}
```
In this test, after applying transformation of replacing select with Phis,
the result will be:
```
define i32 @test(i1 %cond) {
entry:
br i1 %cond, label %exit, label %exit
exit:
%result = i32 phi [123, %exit], [123, %exit]
ret i32 %result
}
```
That is, select is transformed into an invalid Phi, which will then be
reduced to 123 and the second value will be lost. But it is worth
noting that this problem will arise only if select is in the InstCombine
worklist will be before the branch. Otherwise, InstCombine will replace
the branch condition with false and transformation will not be applied.
The fix is to check the target labels in the branch condition for equality.
Patch By: Kirill Polushin
Differential Revision: https://reviews.llvm.org/D84003
Reviewed By: mkazantsev
We can try to replace select with a Phi not in its parent block alone,
but also in blocks of its arguments. We benefit from it when select's
argument is a Phi.
Differential Revision: https://reviews.llvm.org/D83284
Reviewed By: nikic
Summary:
The actual transform i was going after was:
https://rise4fun.com/Alive/Tp9H
```
Name: zz
Pre: isPowerOf2(C0) && isPowerOf2(C1) && C1 == C0
%t0 = and i8 %x, C0
%r = icmp eq i8 %t0, C1
=>
%t = icmp eq i8 %t0, 0
%r = xor i1 %t, -1
Name: zz
Pre: isPowerOf2(C0)
%t0 = and i8 %x, C0
%r = icmp ne i8 %t0, 0
=>
%t = icmp eq i8 %t0, 0
%r = xor i1 %t, -1
```
but as it can be seen from the current tests, we already canonicalize most of it,
and we are only missing handling multi-use non-canonical icmp predicates.
If we have both `!=0` and `==0`, even though we can CSE them,
we end up being stuck with them. We should canonicalize to the `==0`.
I believe this is one of the cleanup steps i'll need after `-scalarizer`
if i end up proceeding with my WIP alloca promotion helper pass.
Reviewers: spatel, jdoerfert, nikic
Reviewed By: nikic
Subscribers: zzheng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83139
This patch transforms
```
p = phi [x, y]
s = select cond, z, p
```
with
```
s = phi[x, z]
```
if we can prove that the Phi node takes values basing on select's condition.
Differential Revision: https://reviews.llvm.org/D82072
Reviewed By: nikic
We can sometimes replace a select with a Phi node if all of its values
are available on respective incoming edges.
Differential Revision: https://reviews.llvm.org/D82005
Reviewed By: nikic
As mentioned in the post-commit comments of D81013 -
the mask check API has to assume the shuffle is
not length-changing, but we have not ruled that out
in this code. Use the ShuffleVectorInst call instead.
SimplifyDemandedVectorElts() bails out on ScalableVectorType
anyway, but we can exit faster with the external check.
Move this to a helper function because there are likely other
vector folds that we can try here.
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: sdesmalen, rriddle, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77263
Rather than converting to a dummy select with equal true and false
ops, just directly return the resulting value.
As a side-effect, this fixes missing DCE of the previously replaced
operand.
Summary: Rewrite the fsub-0.0 idiom to fneg and always emit fneg for fp
negation. This also extends the scalarization cost in instcombine for unary
operators to result in the same IR rewrites for fneg as for the idiom.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D75467
Use UnaryOperator::CreateFNeg instead.
Summary:
With the introduction of the native fneg instruction, the
fsub -0.0, %x idiom is obsolete. This patch makes LLVM
emit fneg instead of the idiom in all places.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D75130
The select-of-cttz transform can currently duplicate cttz intrinsics
and zext/trunc ops. The cause is that it unnecessarily duplicates
the intrinsic and the zext/trunc when setting the "undef_on_zero"
flag to false. However, it's always legal to set the flag from true
to false, so we can make this replacement even if there are extra users.
Differential Revision: https://reviews.llvm.org/D74685
This is a followup to D73803, which uses the replaceOperand()
helper in more places.
This should be NFC apart from changes to worklist order.
Differential Revision: https://reviews.llvm.org/D73919
We were checking for extra uses of the negated operand even
if we were not going to create it as part of this canonicalization.
This was showing up as a regression when we limit EarlyCSE as
proposed in D74285.
While D72944 also fixes https://bugs.llvm.org/show_bug.cgi?id=44541,
it does so in a more roundabout manner and there might be other
loopholes to trigger the same issue. This is a more direct fix,
that prevents the transform if the min/max is based on a
non-canonical sub X, 0 instruction.
Differential Revision: https://reviews.llvm.org/D73849
This renames Worklist.AddDeferred() to Worklist.add() and
Worklist.Add() to Worklist.push(). The intention here is that
Worklist.add() should be the go-to method for explicit worklist
management, while the raw Worklist.push() is mostly for
InstCombine internals. I will then migrate uses of Worklist.push()
to Worklist.add() in followup changes.
As suggested by spatel on D73411 I'm also changing the remaining
method names to lowercase first character, in line with current
coding standards.
Differential Revision: https://reviews.llvm.org/D73745
This should be the last step needed to solve the problem in the
description of PR44153:
https://bugs.llvm.org/show_bug.cgi?id=44153
If we're casting an FP value to int, testing its signbit, and then
choosing between a value and its negated value, that's a
complicated way of saying "copysign":
(bitcast X) < 0 ? -TC : TC --> copysign(TC, X)
Differential Revision: https://reviews.llvm.org/D72643
The constants come through as add %x, -C, not a sub as would be
expected. They need some extra matchers to canonicalise them towards
usub_sat.
Differential Revision: https://reviews.llvm.org/D69514
This adjusts the one use checks in the the usub_sat fold code to not
increase instruction count, but otherwise do the fold. Reviewed as a
part of D69514.
Working on top of D69252, this adds canonicalisation patterns for ssub.with.overflow to ssub.sats.
Differential Revision: https://reviews.llvm.org/D69753
This adds to D69245, adding extra signed patterns for folding from a
sadd_with_overflow to a sadd_sat. These are more complex than the
unsigned patterns, as the overflow can occur in either direction.
For the add case, the positive overflow can only occur if both of the
values are positive (same for both the values being negative). So there
is an extra select on whether to use the positive or negative overflow
limit.
Differential Revision: https://reviews.llvm.org/D69252
As noted by the FIXME comment, this is not correct based on our current FMF semantics.
We should be propagating FMF from the final value in a sequence (in this case the
'select'). So the behavior even without this patch is wrong, but we did not allow FMF
on 'select' until recently.
But if we do the correct thing right now in this patch, we'll inevitably introduce
regressions because we have not wired up FMF propagation for 'phi' and 'select' in
other passes (like SimplifyCFG) or other places in InstCombine. I'm not seeing a
better incremental way to make progress.
That said, the potential extra damage over the existing wrong behavior from this
patch is very limited. AFAIK, the only way to have different FMF on IR in the same
function is if we have LTO inlined IR from 2 modules that were compiled using
different fast-math settings.
As seen in the tests, we may actually see some improvements with this patch because
adding the FMF to the 'select' allows matching to min/max intrinsics that were
previously missed (in the common case, the 'fcmp' and 'select' should have identical
FMF to begin with).
Next steps in the transition:
Make similar changes in instcombine as needed.
Enable phi-to-select FMF propagation in SimplifyCFG.
Remove dependencies on fcmp with FMF.
Deprecate FMF on fcmp.
Differential Revision: https://reviews.llvm.org/D69720
Simon Pilgrim