There's a potential small enhancement to this code that could
solve the cases currently under proposal in D54827 via SimplifyCFG.
Whether instcombine should be doing this kind of semi-non-local
analysis in the first place is an open question, but separating
the logic out can only help if/when we decide to move it to a
different pass.
AFAICT, any proposal to do this in SimplifyCFG could also be seen
as an overreach + it would be incomplete to start the fold from a
branch rather than an icmp.
There's another question here about the code for processUGT_ADDCST_ADD().
That part may be completely dead after rL234638 ?
llvm-svn: 348273
Also revert fix r347876
One of the buildbots was reporting a failure in some relevant tests that I can't
repro or explain at present, so reverting until I can isolate.
llvm-svn: 347911
TFE and LWE support requires extra result registers that are written in the
event of a failure in order to detect that failure case.
The specific use-case that initiated these changes is sparse texture support.
This means that if image intrinsics are used with either option turned on, the
programmer must ensure that the return type can contain all of the expected
results. This can result in redundant registers since the vector size must be a
power-of-2.
This change takes roughly 6 parts:
1. Modify the instruction defs in tablegen to add new instruction variants that
can accomodate the extra return values.
2. Updates to lowerImage in SIISelLowering.cpp to accomodate setting TFE or LWE
(where the bulk of the work for these instruction types is now done)
3. Extra verification code to catch cases where intrinsics have been used but
insufficient return registers are used.
4. Modification to the adjustWritemask optimisation to account for TFE/LWE being
enabled (requires extra registers to be maintained for error return value).
5. An extra pass to zero initialize the error value return - this is because if
the error does not occur, the register is not written and thus must be zeroed
before use. Also added a new (on by default) option to ensure ALL return values
are zero-initialized that is required for sparse texture support.
6. Disable the inst_combine optimization in the presence of tfe/lwe (later TODO
for this to re-enable and handle correctly).
There's an additional fix now to avoid a dmask=0
For an image intrinsic with tfe where all result channels except tfe
were unused, I was getting an image instruction with dmask=0 and only a
single vgpr result for tfe. That is incorrect because the hardware
assumes there is at least one vgpr result, plus the one for tfe.
Fixed by forcing dmask to 1, which gives the desired two vgpr result
with tfe in the second one.
The TFE or LWE result is returned from the intrinsics using an aggregate
type. Look in the test code provided to see how this works, but in essence IR
code to invoke the intrinsic looks as follows:
%v = call {<4 x float>,i32} @llvm.amdgcn.image.load.1d.v4f32i32.i32(i32 15,
i32 %s, <8 x i32> %rsrc, i32 1, i32 0)
%v.vec = extractvalue {<4 x float>, i32} %v, 0
%v.err = extractvalue {<4 x float>, i32} %v, 1
Differential revision: https://reviews.llvm.org/D48826
Change-Id: If222bc03642e76cf98059a6bef5d5bffeda38dda
llvm-svn: 347871
The original patch was committed here:
rL344609
...and reverted:
rL344612
...because it did not properly check/test data types before calling
ComputeNumSignBits().
The tests that caused bot failures for the previous commit are
over-reaching front-end tests that run the entire -O optimizer
pipeline:
Clang :: CodeGen/builtins-systemz-zvector.c
Clang :: CodeGen/builtins-systemz-zvector2.c
I've added a negative test here to ensure coverage for that case.
The new early exit check also tests the type of the 'B' parameter,
so we don't waste time on matching if either value is unsuitable.
Original commit message:
This is part of solving PR37549:
https://bugs.llvm.org/show_bug.cgi?id=37549
The patterns shown here are a special case of something
that we already convert to select. Using ComputeNumSignBits()
catches that case (but not the more complicated motivating
patterns yet).
The backend has hooks/logic to convert back to logic ops
if that's better for the target.
llvm-svn: 345149
There's probably some vector-with-undef-element pattern
that shows an improvement, so this is probably not quite
'NFC'.
This is the last step towards removing the fake binop
queries for not/neg. Ie, there are no more uses of those
functions in trunk. Fneg should follow.
llvm-svn: 345050
I noticed a missing check and added it at rL344610, but there actually
are codegen tests that will fail without that, so I'll edit those and
submit a fixed patch with more tests.
llvm-svn: 344612
This is part of solving PR37549:
https://bugs.llvm.org/show_bug.cgi?id=37549
The patterns shown here are a special case of something
that we already convert to select. Using ComputeNumSignBits()
catches that case (but not the more complicated motivating
patterns yet).
The backend has hooks/logic to convert back to logic ops
if that's better for the target.
llvm-svn: 344609
This is an attempt to get out of a local-minimum that instcombine currently
gets stuck in. We essentially combine two optimisations at once, ~a - ~b = b-a
and min(~a, ~b) = ~max(a, b), only doing the transform if the result is at
least neutral. This involves using IsFreeToInvert, which has been expanded a
little to include selects that can be easily inverted.
This is trying to fix PR35875, using the ideas from Sanjay. It is a large
improvement to one of our rgb to cmy kernels.
Differential Revision: https://reviews.llvm.org/D52177
llvm-svn: 343569
Similar to rL342278:
The test diffs are all cosmetic due to the change in
value naming, but I'm including that to show that the
new code does perform these folds rather than something
else in instcombine.
D52075 should be able to use this code too rather than
duplicating all of the logic.
llvm-svn: 342292
The test diffs are all cosmetic due to the change in
value naming, but I'm including that to show that the
new code does perform these folds rather than something
else in instcombine.
llvm-svn: 342278
getSafeVectorConstantForBinop() was calling getBinOpIdentity() assuming
that the constant we wanted was operand 1 (RHS). That's wrong, but I
don't think we could expose a bug or even a suboptimal fold from that
because the callers have other guards for any binop that would have
been affected.
llvm-svn: 336617
This is almost NFC, but there could be some case where the original
code had undefs in the constants (rather than just the shuffle mask),
and we'll use safe constants rather than undefs now.
The FIXME noted in foldShuffledBinop() is already visible in existing
tests, so correcting that is the next step.
llvm-svn: 336558
Summary:
Use the expanded features of the TableGen generic tables to avoid manually
adding the combinatorially exploded set of intrinsics. The
getAMDGPUImageDimIntrinsic lookup function is early-out,
i.e. non-AMDGPU intrinsics will never look at the underlying table.
Use a generic approach for getting the new intrinsic overload to keep the
code simple, and make the image dmask handling more generic:
- handle non-sampler image loads
- handle the case where the set of demanded elements is not a prefix
There is some overlap between this code and an optimization that happens
in the backend during code generation. They currently complement each other:
- only the codegen optimization can generate vec3 loads
- only the InstCombine optimization can handle D16
The InstCombine optimization also likely covers more cases since the
codegen optimization is fairly ad-hoc. Ideally, we'll remove the optimization
in codegen once the infrastructure for vec3 is in place (which will probably
take a long time).
Modify the test cases to use dimension-aware intrinsics. This makes it
easier to see that the test coverage for the new intrinsics is equivalent,
and the old style intrinsics will be removed in a follow-up commit anyway.
Change-Id: I4b91ea661413d13004956fe4ef7d13d41b8ce3ad
Reviewers: arsenm, rampitec, majnemer
Subscribers: kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48165
llvm-svn: 335230
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
As noted in the review thread for rL333782, we could have
made a bug harder to hit if we were simplifying instructions
before trying other folds.
The shuffle transform in question isn't ever a simplification;
it's just a canonicalization. So I've renamed that to make that
clearer.
This is NFCI at this point, but I've regenerated the test file
to show the cosmetic value naming difference of using
instcombine's RAUW vs. the builder.
Possible follow-ups:
1. Move reassociation folds after simplifies too.
2. Refactor common code; we shouldn't have so much repetition.
llvm-svn: 333820
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Summary:
This change adds handling of the atomic memset intrinsic to the
code path that simplifies the regular memset. In practice this means
that we will now also expand a small constant-length atomic memset
into a single unordered atomic store.
Reviewers: apilipenko, skatkov, mkazantsev, anna, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D46660
llvm-svn: 332132
Summary:
This change reworks the handling of atomic memcpy within the instcombine pass.
Previously, a constant length atomic memcpy would be lowered into loads & stores
as long as no more than 16 load/store pairs are created. This is quite different
from the lowering done for a non-atomic memcpy; which only ever lowers into a single
load/store pair of no more than 8 bytes. Larger constant-sized memcpy calls are
expanded to load/stores in later passes, such as SelectionDAG lowering.
In this change the behaviour for atomic memcpy is unified with non-atomic memcpy;
atomic memcpy is now treated in the same was as non-atomic memcpy has always been.
We leave it to later passes to lower longer-length atomic memcpy calls.
Due to the structure of the pass's handling of memtransfer intrinsics, this change
also gives us handling of atomic memmove that we did not previously have.
Reviewers: apilipenko, skatkov, mkazantsev, anna, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D46658
llvm-svn: 332093
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
Simplify integer add expression X % C0 + (( X / C0 ) % C1) * C0 to
X % (C0 * C1). This is a common pattern seen in code generated by the XLA
GPU backend.
Add test cases for this new optimization.
Patch by Bixia Zheng!
Reviewers: sanjoy
Reviewed By: sanjoy
Subscribers: efriedma, craig.topper, lebedev.ri, llvm-commits, jlebar
Differential Revision: https://reviews.llvm.org/D45976
llvm-svn: 330992
Two cleanups:
1. As noted in D45453, we had tests that don't need FMF that were misplaced in the 'fast-math.ll' test file.
2. This removes the final uses of dyn_castFNegVal, so that can be deleted. We use 'match' now.
llvm-svn: 330126
Summary:
Folding patterns like:
%vec = shufflevector <4 x i8> %insvec, <4 x i8> undef, <4 x i32> zeroinitializer
%cast = bitcast <4 x i8> %vec to i32
%cond = icmp eq i32 %cast, 0
into:
%ext = extractelement <4 x i8> %insvec, i32 0
%cond = icmp eq i32 %ext, 0
Combined with existing rules, this allows us to fold patterns like:
%insvec = insertelement <4 x i8> undef, i8 %val, i32 0
%vec = shufflevector <4 x i8> %insvec, <4 x i8> undef, <4 x i32> zeroinitializer
%cast = bitcast <4 x i8> %vec to i32
%cond = icmp eq i32 %cast, 0
into:
%cond = icmp eq i8 %val, 0
When we construct a splat vector via a shuffle, and bitcast the vector into an integer type for comparison against an integer constant. Then we can simplify the the comparison to compare the splatted value against the integer constant.
Reviewers: spatel, anna, mkazantsev
Reviewed By: spatel
Subscribers: efriedma, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D44997
llvm-svn: 329087
This replaces a large chunk of code that was looking for compound
patterns that include these sub-patterns. Existing tests ensure that
all of the previous examples are still folded as expected.
We still need to loosen the FMF check.
llvm-svn: 328502
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
Also, rename 'foldOpWithConstantIntoOperand' because that's annoyingly
vague. The constant check is redundant in some cases, but it allows
removing duplication for most of the calls.
llvm-svn: 326329
This is guarded by shouldChangeType(), so the tests show that
we don't do the fold if the narrower type is not legal. Note
that there is a proposal (D42424) that would change the results
for the specific cases shown in these tests. That difference is
also discussed in PR35792:
https://bugs.llvm.org/show_bug.cgi?id=35792
Alive proofs for the cases handled here as well as the bitwise
logic binops that we should already do better on:
https://rise4fun.com/Alive/c97https://rise4fun.com/Alive/Lc5Ehttps://rise4fun.com/Alive/kdf
llvm-svn: 323437
Summary:
For reference, see: http://lists.llvm.org/pipermail/llvm-dev/2017-August/116589.html
This patch fleshes out the instruction class hierarchy with respect to atomic and
non-atomic memory intrinsics. With this change, the relevant part of the class
hierarchy becomes:
IntrinsicInst
-> MemIntrinsicBase (methods-only class)
-> MemIntrinsic (non-atomic intrinsics)
-> MemSetInst
-> MemTransferInst
-> MemCpyInst
-> MemMoveInst
-> AtomicMemIntrinsic (atomic intrinsics)
-> AtomicMemSetInst
-> AtomicMemTransferInst
-> AtomicMemCpyInst
-> AtomicMemMoveInst
-> AnyMemIntrinsic (both atomicities)
-> AnyMemSetInst
-> AnyMemTransferInst
-> AnyMemCpyInst
-> AnyMemMoveInst
This involves some class renaming:
ElementUnorderedAtomicMemCpyInst -> AtomicMemCpyInst
ElementUnorderedAtomicMemMoveInst -> AtomicMemMoveInst
ElementUnorderedAtomicMemSetInst -> AtomicMemSetInst
A script for doing this renaming in downstream trees is included below.
An example of where the Any* classes should be used in LLVM is when reasoning
about the effects of an instruction (ex: aliasing).
---
Script for renaming AtomicMem* classes:
PREFIXES="[<,([:space:]]"
CLASSES="MemIntrinsic|MemTransferInst|MemSetInst|MemMoveInst|MemCpyInst"
SUFFIXES="[;)>,[:space:]]"
REGEX="(${PREFIXES})ElementUnorderedAtomic(${CLASSES})(${SUFFIXES})"
REGEX2="visitElementUnorderedAtomic(${CLASSES})"
FILES=$( grep -E "(${REGEX}|${REGEX2})" -r . | tr ':' ' ' | awk '{print $1}' | sort | uniq )
SED_SCRIPT="s~${REGEX}~\1Atomic\2\3~g"
SED_SCRIPT2="s~${REGEX2}~visitAtomic\1~g"
for f in $FILES; do
echo "Processing: $f"
sed -i ".bak" -E "${SED_SCRIPT};${SED_SCRIPT2};${EA_SED_SCRIPT};${EA_SED_SCRIPT2}" $f
done
Reviewers: sanjoy, deadalnix, apilipenko, anna, skatkov, mkazantsev
Reviewed By: sanjoy
Subscribers: hfinkel, jholewinski, arsenm, sdardis, nhaehnle, JDevlieghere, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D38419
llvm-svn: 316950
Summary:
The following transformation for cmp instruction:
icmp smin(x, PositiveValue), 0 -> icmp x, 0
should only be done after checking for min/max to prevent infinite
looping caused by a reverse canonicalization. That is why this
transformation was moved to place after the mentioned check.
Reviewers: spatel, efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38934
Patch by: Artur Gainullin <artur.gainullin@intel.com>
llvm-svn: 315895
Eliminate inttype phi with inttoptr/ptrtoint.
This version fixed a bug in finding the matching
phi -- the order of the incoming blocks may be
different (triggered in self build on Windows).
A new test case is added.
llvm-svn: 315272
There's at least one bug here - this code can fail with vector types (PR34856).
It's also being called for FREM; I'm still trying to understand how that is valid.
llvm-svn: 315127
This appears to be miscompiling Clang, as shown on two Windows bootstrap
bots:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/builds/7611http://lab.llvm.org:8011/builders/clang-x64-ninja-win7/builds/6870
Nothing else is in the blame list. Both emit errors on this valid code
in the Windows ucrt headers:
C:\...\ucrt\malloc.h:95:32: error: invalid operands to binary expression ('char *' and 'int')
_Ptr = (char*)_Ptr + _ALLOCA_S_MARKER_SIZE;
~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~
I am attempting to reproduce this now.
This reverts r315044
llvm-svn: 315108
Summary: If the merged instruction is call instruction, we need to set the scope to the closes common scope between 2 locations, otherwise it will cause trouble when the call is getting inlined.
Reviewers: dblaikie, aprantl
Reviewed By: dblaikie, aprantl
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D37877
llvm-svn: 314694
And follow-up r314585.
Leads to segfaults. I'll forward reproduction instructions to the patch
author.
Also, for a recommit, still add the original patch description.
Otherwise, it becomes really tedious to find out what a patch actually
does. The fact that it is a recommit with a fix is somewhat secondary.
llvm-svn: 314622
Sanjay Patel