The assert was being triggered when the distance between a constant pool entry
and its user exceeded the maximally allowed distance after thumb2 branch
shortening. A padding was inserted after a thumb2 branch instruction was shrunk,
which caused the user to be out of range. This is wrong as the padding should
have been inserted by the layout algorithm so that the distance between two
instructions doesn't grow later during thumb2 instruction optimization.
This commit fixes the code in ARMConstantIslands::createNewWater to call
computeBlockSize and set BasicBlock::Unalign when a branch instruction is
inserted to create new water after a basic block. A non-zero Unalign causes
the worst-case padding to be inserted when adjustBBOffsetsAfter is called to
recompute the basic block offsets.
rdar://problem/19130476
llvm-svn: 225467
Summary: The PIC additions didn't update the prologue and epilogue code to save and restore r30 (PIC base register). This does that.
Test Plan: Tests updated.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6876
llvm-svn: 225450
This partially fixes PR13007 (ARM CodeGen fails with large stack
alignment): for ARM and Thumb2 targets, but not for Thumb1, as it
seems stack alignment for Thumb1 targets hasn't been supported at
all.
Producing an aligned stack pointer is done by zero-ing out the lower
bits of the stack pointer. The BIC instruction was used for this.
However, the immediate field of the BIC instruction only allows to
encode an immediate that can zero out up to a maximum of the 8 lower
bits. When a larger alignment is requested, a BIC instruction cannot
be used; llvm was silently producing incorrect code in this case.
This commit fixes code generation for large stack aligments by
using the BFC instruction instead, when the BFC instruction is
available. When not, it uses 2 instructions: a right shift,
followed by a left shift to zero out the lower bits.
The lowering of ARM::Int_eh_sjlj_dispatchsetup still has code
that unconditionally uses BIC to realign the stack pointer, so it
very likely has the same problem. However, I wasn't able to
produce a test case for that. This commit adds an assert so that
the compiler will fail the assert instead of silently generating
wrong code if this is ever reached.
llvm-svn: 225446
Its functionality has been replaced by calling
SIInstrInfo::legalizeOperands() from
SIISelLowering::AdjstInstrPostInstrSelection() and running the
SIFoldOperands and SIShrinkInstructions passes.
llvm-svn: 225445
The call lowering assumes that if the callee is a global, we want to emit a direct call.
This is correct for regular globals, but not for TLS ones.
Differential Revision: http://reviews.llvm.org/D6862
llvm-svn: 225438
PEI tries to keep track of how much starting or ending a call sequence adjusts the stack pointer by, so that it can resolve frame-index references. Currently, it takes a very simplistic view of how SP adjustments are done - both FrameStartOpcode and FrameDestroyOpcode adjust it exactly by the amount written in its first argument.
This view is in fact incorrect for some targets (e.g. due to stack re-alignment, or because it may want to adjust the stack pointer in multiple steps). However, that doesn't cause breakage, because most targets (the only in-tree exception appears to be 32-bit ARM) rely on being able to simplify the call frame pseudo-instructions earlier, so this code is never hit.
Moving the computation into TargetInstrInfo allows targets to override the way the adjustment is computed if they need to have a non-zero SPAdj.
Differential Revision: http://reviews.llvm.org/D6863
llvm-svn: 225437
A broken hint is a copy where both ends are assigned different colors. When a
variable gets evicted in the neighborhood of such copies, it is likely we can
reconcile some of them.
** Context **
Copies are inserted during the register allocation via splitting. These split
points are required to relax the constraints on the allocation problem. When
such a point is inserted, both ends of the copy would not share the same color
with respect to the current allocation problem. When variables get evicted,
the allocation problem becomes different and some split point may not be
required anymore. However, the related variables may already have been colored.
This usually shows up in the assembly with pattern like this:
def A
...
save A to B
def A
use A
restore A from B
...
use B
Whereas we could simply have done:
def B
...
def A
use A
...
use B
** Proposed Solution **
A variable having a broken hint is marked for late recoloring if and only if
selecting a register for it evict another variable. Indeed, if no eviction
happens this is pointless to look for recoloring opportunities as it means the
situation was the same as the initial allocation problem where we had to break
the hint.
Finally, when everything has been allocated, we look for recoloring
opportunities for all the identified candidates.
The recoloring is performed very late to rely on accurate copy cost (all
involved variables are allocated).
The recoloring is simple unlike the last change recoloring. It propagates the
color of the broken hint to all its copy-related variables. If the color is
available for them, the recoloring uses it, otherwise it gives up on that hint
even if a more complex coloring would have worked.
The recoloring happens only if it is profitable. The profitability is evaluated
using the expected frequency of the copies of the currently recolored variable
with a) its current color and b) with the target color. If a) is greater or
equal than b), then it is profitable and the recoloring happen.
** Example **
Consider the following example:
BB1:
a =
b =
BB2:
...
= b
= a
Let us assume b gets split:
BB1:
a =
b =
BB2:
c = b
...
d = c
= d
= a
Because of how the allocation work, b, c, and d may be assigned different
colors. Now, if a gets evicted to make room for c, assuming b and d were
assigned to something different than a.
We end up with:
BB1:
a =
st a, SpillSlot
b =
BB2:
c = b
...
d = c
= d
e = ld SpillSlot
= e
This is likely that we can assign the same register for b, c, and d,
getting rid of 2 copies.
** Performances **
Both ARM64 and x86_64 show performance improvements of up to 3% for the
llvm-testsuite + externals with Os and O3. There are a few regressions too that
comes from the (in)accuracy of the block frequency estimate.
<rdar://problem/18312047>
llvm-svn: 225422
type (in addition to the memory type).
The *LoadExt* legalization handling used to only have one type, the
memory type. This forced users to assume that as long as the extload
for the memory type was declared legal, and the result type was legal,
the whole extload was legal.
However, this isn't always the case. For instance, on X86, with AVX,
this is legal:
v4i32 load, zext from v4i8
but this isn't:
v4i64 load, zext from v4i8
Whereas v4i64 is (arguably) legal, even without AVX2.
Note that the same thing was done a while ago for truncstores (r46140),
but I assume no one needed it yet for extloads, so here we go.
Calls to getLoadExtAction were changed to add the value type, found
manually in the surrounding code.
Calls to setLoadExtAction were mechanically changed, by wrapping the
call in a loop, to match previous behavior. The loop iterates over
the MVT subrange corresponding to the memory type (FP vectors, etc...).
I also pulled neighboring setTruncStoreActions into some of the loops;
those shouldn't make a difference, as the additional types are illegal.
(e.g., i128->i1 truncstores on PPC.)
No functional change intended.
Differential Revision: http://reviews.llvm.org/D6532
llvm-svn: 225421
The register coalescer used to remove implicit_defs when they are
covered by the main range anyway. With subreg liveness tracking we can't
do that anymore in places where the IMPLICIT_DEF is required as begin of
a subregister liverange.
llvm-svn: 225416
I got confused and assumed SrcIdx/DstIdx of the CoalescerPair is a
subregister index in SrcReg/DstReg, but they are actually subregister
indices of the coalesced register that get you back to SrcReg/DstReg
when applied.
Fixed the bug, improved comments and simplified code accordingly.
Testcase by Tom Stellard!
llvm-svn: 225415
Patch by: Ramkumar Ramachandra <artagnon@gmail.com>
"This patch started out as an exploration of gc.relocate, and an attempt
to write a simple test in call-lowering. I then noticed that the
arguments of gc.relocate were not checked fully, so I went in and fixed
a few things. Finally, the most important outcome of this patch is that
my new error handling code caught a bug in a callsite in
stackmap-format."
Differential Revision: http://reviews.llvm.org/D6824
llvm-svn: 225412
Allow distinct `MDNode`s to be explicitly created. There's no way (yet)
of representing their distinctness in assembly/bitcode, however, so this
still isn't first-class.
Part of PR22111.
llvm-svn: 225406
`MDNode::replaceOperandWith()` changes all instances of metadata. Stop
using it when linking module flags, since (due to uniquing) the flag
values could be used by other metadata.
Instead, use new API `NamedMDNode::setOperand()` to update the reference
directly.
llvm-svn: 225397
Use VGPR_32 register class instead. These two register classes were
identical and having separate classes was causing
SIInstrInfo::isLegalOperands() to be overly conservative in some cases.
This change is necessary to prevent future paches from missing a folding
opportunity in fneg-fabs.ll.
llvm-svn: 225382
This change includes the most basic possible GCStrategy for a GC which is using the statepoint lowering code. At the moment, this GCStrategy doesn't really do much - aside from actually generate correct stackmaps that is - but I went ahead and added a few extra correctness checks as proof of concept. It's mostly here to provide documentation on how to do one, and to provide a point for various optimization legality hooks I'd like to add going forward. (For context, see the TODOs in InstCombine around gc.relocate.)
Most of the validation logic added here as proof of concept will soon move in to the Verifier. That move is dependent on http://reviews.llvm.org/D6811
There was discussion in the review thread about addrspace(1) being reserved for something. I'm going to follow up on a seperate llvmdev thread. If needed, I'll update all the code at once.
Note that I am deliberately not making a GCStrategy required to use gc.statepoints with this change. I want to give folks out of tree - including myself - a chance to migrate. In a week or two, I'll make having a GCStrategy be required for gc.statepoints. To this end, I added the gc tag to one of the test cases but not others.
Differential Revision: http://reviews.llvm.org/D6808
llvm-svn: 225365
LLVM emits stack probes on Windows targets to ensure that the stack is
correctly accessed. However, the amount of stack allocated before
emitting such a probe is hardcoded to 4096.
It is desirable to have this be configurable so that a function might
opt-out of stack probes. Our level of granularity is at the function
level instead of, say, the module level to permit proper generation of
code after LTO.
Patch by Andrew H!
N.B. The inliner needs to be updated to properly consider what happens
after inlining a function with a specific stack-probe-size into another
function with a different stack-probe-size.
llvm-svn: 225360
Used to iterate over previously added memory dependencies in
adjustChainDeps() and iterateChainSucc().
SDep::isCtrl() was previously used in these places, that also gave
anti and output edges. The code may be worse if these are followed,
because MisNeedChainEdge() will conservatively return true since a
non-memory instruction has no memory operands, and a false chain dep
will be added. It is also unnecessary since all memory accesses of
interest will be reached by memory dependencies, and there is a budget
limit for the number of edges traversed.
This problem was found on an out-of-tree target with enabled alias
analysis. No test case for an in-tree target has been found.
Reviewed by Hal Finkel.
llvm-svn: 225351
The change in r225266 was reviewed under D6722. But the commit r225266 has a
typo, causing some MCHammer failures. This patch fixes it.
Change-Id: I573efcff25003af7478ac02548ebbe929fc7f5fd
llvm-svn: 225347
Even thouh gcc produces simialr instructions as Owen pointed out the two patterns aren’t equivalent in the case
where the original subtraction could have caused an overflow.
Reverting the same.
llvm-svn: 225341
passes too many time.
I think this is actually the issue that someone raised with me at the
developer's meeting and in an email, but that we never really got to the
bottom of. Having all the testing utilities made it much easier to dig
down and uncover the core issue.
When a pass manager is running many passes over a single function, we
need it to invalidate the analyses between each run so that they can be
re-computed as needed. We also need to track the intersection of
preserved higher-level analyses across all the passes that we run (for
example, if there is one module analysis which all the function analyses
preserve, we want to track that and propagate it). Unfortunately, this
interacted poorly with any enclosing pass adaptor between two IR units.
It would see the intersection of preserved analyses, and need to
invalidate any other analyses, but some of the un-preserved analyses
might have already been invalidated *and recomputed*! We would fail to
propagate the fact that the analysis had already been invalidated.
The solution to this struck me as really strange at first, but the more
I thought about it, the more natural it seemed. After a nice discussion
with Duncan about it on IRC, it seemed even nicer. The idea is that
invalidating an analysis *causes* it to be preserved! Preserving the
lack of result is trivial. If it is recomputed, great. Until something
*else* invalidates it again, we're good.
The consequence of this is that the invalidate methods on the analysis
manager which operate over many passes now consume their
PreservedAnalyses object, update it to "preserve" every analysis pass to
which it delivers an invalidation (regardless of whether the pass
chooses to be removed, or handles the invalidation itself by updating
itself). Then we return this augmented set from the invalidate routine,
letting the pass manager take the result and use the intersection of
*that* across each pass run to compute the final preserved set. This
accounts for all the places where the early invalidation of an analysis
has already "preserved" it for a future run.
I've beefed up the testing and adjusted the assertions to show that we
no longer repeatedly invalidate or compute the analyses across nested
pass managers.
llvm-svn: 225333
WillNotOverflowUnsignedAdd's smarts will live in ValueTracking as
computeOverflowForUnsignedAdd. It now returns a tri-state result:
never overflows, always overflows and sometimes overflows.
llvm-svn: 225329
Remove the README.txt entry regarding register allocation of CR logical ops,
and replace it with a FIXME in PPCInstrInfo.td. The text in the README.txt was
not really accurate, and thanks goes to Pat Haugen (and Bill Schmidt) from IBM
for clarifying what was intended and highlighting the relevant text in the ISA
specification.
llvm-svn: 225325
This is affecting the behavior of some ObjC++ / AArch64 test cases on Darwin.
Reverting to get the bots green while I track down the source of the changed
behavior.
llvm-svn: 225311
In order to make comdats always explicit in the IR, we decided to make
the syntax a bit more compact for the case of a GlobalObject in a
comdat with the same name.
Just dropping the $name causes problems for
@foo = globabl i32 0, comdat
$bar = comdat ...
and
declare void @foo() comdat
$bar = comdat ...
So the syntax is changed to
@g1 = globabl i32 0, comdat($c1)
@g2 = globabl i32 0, comdat
and
declare void @foo() comdat($c1)
declare void @foo() comdat
llvm-svn: 225302
int->fp conversions on PPC must be done through memory loads and stores. On a
modern core, this process begins by storing the int value to memory, then
loading it using a (sometimes special) FP load instruction. Unfortunately, we
would do this even when the value to be converted was itself a load, and we can
just use that same memory location instead of copying it to another first.
There is a slight complication when handling int_to_fp(fp_to_int(x)) pairs,
because the fp_to_int operand has not been lowered when the int_to_fp is being
lowered. We handle this specially by invoking fp_to_int's lowering logic
(partially) and getting the necessary memory location (some trivial refactoring
was done to make this possible).
This is all somewhat ugly, and it would be nice if some later CodeGen stage
could just clean this stuff up, but because doing so would involve modifying
target-specific nodes (or instructions), it is not immediately clear how that
would work.
Also, remove a related entry from the README.txt for which we now generate
reasonable code.
llvm-svn: 225301
In DS write instructions, the address operand comes before the value
operand(s) which is reversed from every other instruction type.
The SIInsertWait assumed that the first use for each instruction
was the value, so for DS write it was protecting the address
operand with s_waitcnt instructions when it should have been
protecting the value operand.
llvm-svn: 225289
This is equivalent to the AMDGPUTargetMachine now, but it is the
starting point for separating R600 and GCN functionality into separate
targets.
It is recommened that users start using the gcn triple for GCN-based
GPUs, because using the r600 triple for these GPUs will be deprecated in
the future.
llvm-svn: 225277
This patch improves the logic added at revision 224899 (see review D6728) that
teaches the backend when it is profitable to speculate calls to cttz/ctlz.
The original algorithm conservatively avoided speculating more than one
instruction from a basic block in a control flow grap modelling an if-statement.
In particular, the only allowed instruction (excluding the terminator) was a
call to cttz/ctlz. However, there are cases where we could be less conservative
and still be able to speculate a call to cttz/ctlz.
With this patch, CodeGenPrepare now tries to speculate a cttz/ctlz if the
result is zero extended/truncated in the same basic block, and the zext/trunc
instruction is "free" for the target.
Added new test cases to CodeGen/X86/cttz-ctlz.ll
Differential Revision: http://reviews.llvm.org/D6853
llvm-svn: 225274
This also rolls in the changes discussed in http://reviews.llvm.org/D6766.
Defers migrating the debug info for new allocas until after all partitions
are created.
Thanks to Chandler for reviewing!
llvm-svn: 225272
The color scheme is the same as the one used by the colorize dwarfdump
script on Darwin.
A new --color option can be used to forcibly turn color on or off.
http://reviews.llvm.org/D6852
llvm-svn: 225269
No functional changes. Support for ARM's modified immediate syntax was added
in r223113 and r223115 (review: D6408). That patch introduced the mod_imm*
tblegen definitions which renders the existing so_imm* definitions redundant.
This patch gets rid of them completely.
Reviewed as: D6722
llvm-svn: 225266
This is already handled in general when it is known the
conversion can't lose bits with smaller integer types
casted into wider floating point types.
This pattern happens somewhat often in GPU programs that cast
workitem intrinsics to float, which are often compared with 0.
Specifically handle the special case of compares with zero which
should also be known to not lose information. I had a more general
version of this which allows equality compares if the casted float is
exactly representable in the integer, but I'm not 100% confident that
is always correct.
Also fold cases that aren't integers to true / false.
llvm-svn: 225265
Requires new AsmParserOperand types that detect 16-bit and 32/64-bit mode so that we choose the right instruction based on default sizing without predicates. This is necessary since predicates mess up the disassembler table building.
llvm-svn: 225256
Try harder to get rid of bitcast'd calls by ptrtoint/inttoptr'ing
arguments and return values when DataLayout says it is safe to do so.
llvm-svn: 225254
Overall this seems simpler. It reduces duplication of patterns between both modes and it simplifies the memory folding/unfolding tables as they don't need to create fake instructions just to keep track of 64-bitness.
llvm-svn: 225252
Because of how Clang represents structs as arrays (at least on non-Darwin
platforms), and what SROA does, etc. this is no longer a problem.
llvm-svn: 225251
"ELF Handling for Thread-Local Storage" specifies that R_X86_64_GOTTPOFF
relocation target a movq or addq instruction.
Prohibit the truncation of such loads to movl or addl.
This fixes PR22083.
Differential Revision: http://reviews.llvm.org/D6839
llvm-svn: 225250
The old target DAG combine that allowed for performing int_to_fp(fp_to_int(x))
without a load/store pair is updated here with support for unsigned integers,
and to support single-precision values without a third rounding step, on newer
cores with the appropriate instructions.
llvm-svn: 225248
a specific analysis result.
This is quite handy to test things, and will also likely be very useful
for debugging issues. You could narrow down pass validation failures by
walking these invalidate pass runs up and down the pass pipeline, etc.
I've added support to the pass pipeline parsing to be able to create one
of these for any analysis pass desired.
Just adding this class uncovered one latent bug where the
AnalysisManager CRTP base class had a hard-coded Module type rather than
using IRUnitT.
I've also added tests for invalidation and caching of analyses in
a basic way across all the pass managers. These in turn uncovered two
more bugs where we failed to correctly invalidate an analysis -- its
results were invalidated but the key for re-running the pass was never
cleared and so it was never re-run. Quite nasty. I'm very glad to debug
this here rather than with a full system.
Also, yes, the naming here is horrid. I'm going to update some of the
names to be slightly less awful shortly. But really, I've no "good"
ideas for naming. I'll be satisfied if I can get it to "not bad".
llvm-svn: 225246
The assembler backend will relax to the long form if necessary. This removes a swap from long form to short form in the MCInstLowering code. Selecting the long form used to be required by the old JIT.
llvm-svn: 225242
Duncan P. N. Exon Smith