lldb-vsdode was communicating the list of modules to the IDE with events, which in practice ended up having some drawbacks
- when debugging large targets, the number of these events were easily 10k, which polluted the messages being transmitted, which caused the following: a harder time debugging the messages, a lag after terminated the process because of these messages being processes (this could easily take several seconds). The latter was specially bad, as users were complaining about it even when they didn't check the modules view.
- these events were rarely used, as users only check the modules view when something is wrong and they try to debug things.
After getting some feedback from users, we realized that it's better to not used events but make this simply a request and is triggered by users whenever they needed.
This diff achieves that and does some small clean up in the existing code.
Differential Revision: https://reviews.llvm.org/D94033
The test couldn't find lldb-server as it's path was being overridden by
LLDB_DEBUGSERVER_PATH environment variable (pointing to debugserver).
This test should always use lldb-server, as it tests its platform
capabilities.
There's no need for the environment override, as lldb-server tests
should test the executable they just built, so I just remote the
override capability.
The tests don't work with remote debugservers. This isn't a problem with
any particular test, but the test infrastructure itself, which is why
each of these tests has a @skipIfDarwinEmbedded decorator.
This patch replaces that with a central category-based solution. It also
moves the ad-hoc windows skipping mechanism there too.
This uses the same approach as the debug info tests to avoid needing to
explicitly spell out the two kinds of tests. I convert a handful of
tests to the new mechanism. The rest will be converted in follow-up
patches.
Nearly all of our lldb-server tests have two flavours (lldb-server and
debugserver). Each of them is tagged with an appropriate decorator, and
each of them starts with a call to a matching "init" method. The init
calls are mandatory, and it's not possible to meaningfully combine them
with a different decorator.
This patch leverages the existing decorators to also tag the tests with
the appropriate debug server tag, similar to how we do with debug info
flavours. This allows us to make the "init" calls from inside the common
setUp method.
lldb-server tests are a very special subclass of "api" tests. As they
communicate with lldb-server directly, they don't actually need most of
facilities provided by our TestBase class. In particular, they don't
need the ability to fork debug info flavours of tests (but they could
use debug server flavours).
This makes them inherit from "Base" instead. This avoids the need to
explicitly mark these tests as NO_DEBUG_INFO_TEST_CASE. Two additional
necessary tweaks were:
- move run_platform_command to the base (Base) class. This is used in
one test, and can be generally useful when running tests remotely.
- add a "build" method, forwarding to buildDefault. This is to avoid
updating each test case to use buildDefault (also, "build" sounds
better). It might be interesting to refactor the (Test)Base classes so
that all debug info flavour handling happens in TestBase, and the Base
class provides a simple build method automatically.
TestLldbGdbServer.py testcases are timing out on LLDB/AArch64 Linux
buildbot since recent changes. I am temporarily increasing
DEFAULT_TIMEOUT to 20 seconds to see impact.
Now that the class does not use a thread, the name is no longer
appropriate. Rename the class to "Server" and make it a long-lived
object (instead of recreating it for every expect_gdbremote_sequence
call). The idea is to make this class a wrapper for all communication
with debug/lldb-server. This will enable some additional cleanups as we
had some duplication between socket_pump non-pump code paths.
Also squeeze in some small improvements:
- use python-level timeouts on sockets instead of the manual select
calls
- use byte arrays instead of strings when working with raw packets
This patch carries forward our aim to remove offset field from qRegisterInfo
packets and XML register description. I have created a new function which
returns if offset fields are dynamic meaning client can calculate offset on
its own based on register number sequence and register size. For now this
function only returns true for NativeRegisterContextLinux_arm64 but we can
test this for other architectures and make it standard later.
As a consequence we do not send offset field from lldb-server (arm64 for now)
while other stubs dont have an offset field so it wont effect them for now.
On the client side we have replaced previous offset calculation algorithm
with a new scheme, where we sort all primary registers in increasing
order of remote regnum and then calculate offset incrementally.
This committ also includes a test to verify all of above functionality
on Arm64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91241
This patch ovverides GetExpeditedRegisterSet for
NativeRegisterContextLinux_arm64 to send vector granule register in
expedited register set if SVE mode is selected.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82855
A separate thread is not necessary, as we can do its work on the main
thread, while waiting for the packet to arrive. This makes the code
easier to understand and debug (other simplifications are possible too,
but I'll leave that for separate patches). The new implementation also
avoids busy waiting.
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
This fixes an flakyness is all gdb-remote tests. These tests have been
(mildly) flaky since we started using "localhost" instead of 127.0.0.1
in the test suite. The reason is that lldb-server needs to create two
sockets (v4 and v6) to listen for localhost connections. The algorithm
it uses first tries to select a random port (bind(localhost:0)) for the
first address, and then bind the same port for the second one.
The creating of the second socket can fail as there's no guarantee that
port will be available -- it seems that the (linux) kernel tries to
choose an unused port for the first socket (I've had to create thousands
of sockets to reproduce this reliably), but this can apparantly fail
when the system is under load (and our test suite creates a _lot_ of
sockets).
The socket creationg operation is considered successful if it creates at
least one socket is created, but the test harness has no way of knowing
which one it is, so it can end up connecting to the wrong address.
I'm not aware of a way to atomically create two sockets bound to the
same port. One way to fix this would be to make lldb-server report the
address is it listening on instead of just the port. However, this would
be a breaking change and it's not clear to me that's worth it (the
algorithm works pretty well under normal circumstances).
Instead, this patch sidesteps that problem by using "reverse"
connections. This way, the test harness is responsible for creating the
listening socket so it can pass the address that it has managed to open.
It also results in much simpler code overall.
To preserve test coverage for the named pipe method, I've moved the
relevant code to a dedicated test. To avoid original problem, this test
passes raw addresses (as obtained by getaddrinfo(localhost)) instead of
"localhost".
Differential Revision: https://reviews.llvm.org/D90313
Per the DAP spec for SetBreakpoints [1], the way to clear breakpoints is: `To clear all breakpoint for a source, specify an empty array.`
However, leaving the breakpoints field unset is also a well formed request (note the `breakpoints?:` in the `SetBreakpointsArguments` definition). If it's unset, we have a couple choices:
1. Crash (current behavior)
2. Clear breakpoints
3. Return an error response that the breakpoints field is missing.
I propose we do (2) instead of (1), and treat an unset breakpoints field the same as an empty breakpoints field.
[1] https://microsoft.github.io/debug-adapter-protocol/specification#Requests_SetBreakpoints
Reviewed By: wallace, labath
Differential Revision: https://reviews.llvm.org/D88513
When running in an ipv6-only environment where `AF_INET` sockets are not available, many lldb tests (mostly gdb remote tests) fail because things like `127.0.0.1` don't work there.
Use `localhost` instead of `127.0.0.1` whenever possible, or include a fallback of creating `AF_INET6` sockets when `AF_INET` fails.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87333
In order to be able to run the debugserver tests against the Rosetta
debugserver, detect the Rosetta run configuration and return the
system Rosetta debugserver.
This test was added in D74217 (and the `.categories` file later added in ccf1c30cde) around the same time I moved the test tree from `lldb/packages/Python/lldbsuite/test` to `lldb/test/API` (D71151). Since this got lost in the move, it isn't running. (I introduced an intentional syntax error, and `ninja check-lldb` passes).
I moved it to the correct location, and now it runs and passes -- locally, at least -- as `ninja check-lldb-api-tools-lldb-server-registers-target-xml-reading`.
If a module has debug info, the size of debug symbol will be displayed after the Symbols Loaded Message for each module in the VScode modules view.{F12335461}
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D83731
Summary: If a module has debug info, the size of debug symbol will be displayed after the Symbols Loaded Message for each module in the VScode modules view.{F12335461}
Reviewers: wallace, clayborg
Reviewed By: wallace, clayborg
Subscribers: cfe-commits, aprantl, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D83731
Summary:
The `string_escape` encoding used here was removed in Python 3 which makes the
test crash during tearDown:
```
File "lldb/third_party/Python/module/unittest2/unittest2/case.py", line 386, in run
self.tearDown()
File "lldb/packages/Python/lldbsuite/test/tools/lldb-server/gdbremote_testcase.py", line 124, in tearDown
self._pump_queues.verify_queues_empty()
File "lldb/packages/Python/lldbsuite/test/tools/lldb-server/socket_packet_pump.py", line 55, in verify_queues_empty
_dump_queue(self.packet_queue())
File "lldb/packages/Python/lldbsuite/test/tools/lldb-server/socket_packet_pump.py", line 28, in _dump_queue
print(codecs.encode(the_queue.get(True), "string_escape"))
LookupError: unknown encoding: string_escape
```
Just replace it with `repr` which should work in both Python versions.
Reviewers: labath, JDevlieghere
Reviewed By: labath, JDevlieghere
Subscribers: JDevlieghere
Differential Revision: https://reviews.llvm.org/D84017
Reduce sleep and time outs in GDB remote testcases to one default value
for each. Stop passing these values around and always use the default
instead.
Differential revision: https://reviews.llvm.org/D83904
Remove custom tearDownHooks from GDB Remote tests as we now cleanup
subprocesses unconditionally. This also changes the termination order to
be the reverse of the creation order. I don't think anything is relying
on that right now, but it better fits the setup/teardown paradigm.
Original commit c60216db15.
The test can only run on Darwin because of how it was setup, so I'm
enforcing that.
Summary:
Test Plan:
Reviewers:
Subscribers:
Tasks:
Tags:
Summary: User can expand and check compile unit list for the modules that have debug info.
Reviewers: wallace, clayborg
Reviewed By: clayborg
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83072
Summary:
Whenever a module is created, removed or changed, lldb-vscode is now sending an event that can be interpreted by the IDE so that modules can be rendered in the IDE, like the tree view in this screenshot
{F12229758}
Reviewers: wallace, clayborg, kusmour, aadsm
Reviewed By: clayborg
Subscribers: cfe-commits, labath, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D82477
Summary:
This redoes https://reviews.llvm.org/D79726 and fixes two things.
- The logic that determines whether to automatically disconnect during the tear down is not very dumb compared to the original implementation. Each test will determine whether to do that or not.
- The terminate commands and terminate event were being sent after the disconnect response was sent to the IDE. That was not good, as VSCode stops the debug session as soon as it receives a disconnect response. Now, the terminate event and terminateEvents are being executed before the disconnect response is sent. This ensures that any connection between the IDE and lldb-vscode is alive while the terminate commands are executed. Besides, it also allows displaying the output of the terminate commands on the debug console, as it's still alive.
Reviewers: clayborg, aadsm, kusmour, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
Summary:
Recently I've noticed that VSCode sometimes doesn't send the terminateDebuggee flag within the disconnectRequest,
even though lldb-vscode sets the terminateDebuggee capability correctly.
This has been causing that inferiors don't die after the debug session ends, and many users have reported issues because of this.
An easy way to mitigate this is to set better default values for the terminateDebuggee field in the disconnect request.
I'm assuming that for a launch request, the default will be true, and for attach it'll be false.
Reviewers: clayborg, labath, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81200
Summary: Adding this in line with "stopCommands" and "exitCommands" so that we can run commands at the end of the debugging session.
Reviewers: clayborg, wallace, labath
Reviewed By: clayborg, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D79726
Summary:
Currently loading core files on lldb-vscode is broken because there's a check in the attach workflow that asserts that the PID is valid, which of course fails for this case.
Hence, I'm adding a "coreFile" argument for the attach request, which does the work correctly.
I don't know how to test it effectively so that it runs on the buildbots and the debugger can in fact makes sense of it. Anyway, the change has been relatively simple.
Reviewers: labath, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D78839
Summary:
When using source maps for a breakpoint, in order to find the actual source that breakpoint has resolved, we
need to use a query similar to what CommandObjectSource::DumpLinesInSymbolContexts does, which is the logic
used by the CLI to display the source line at a given breakpoint. That's necessary because from a breakpoint
location you only have an address, which points to the original source location, not the source mapped one.
in the setBreakpoints request handler, we haven't been doing such query and we were returning the original
source location, which was breaking the UX of VSCode, as many breakpoints were being set but not displayed
in the source file next to each line. Besides, clicking the source path of a breakpoint in the breakpoints
view in the debug tab was not working for this case, as VSCode was trying to open a non-existent file, thus
showing an error to the user.
Ideally, we should do the query mentioned above to find the actual source location to respond to the IDE,
however, that query is expensive and users can have an arbitrary number of breakpoints set. As a simpler fix,
the request sent by VSCode already contains the full source path, which exists because the user set it from
the IDE itself, so we can simply reuse it instead of querying from the SB API.
I wrote a test for this, and found out that I had to move SetSourceMapFromArguments after RunInitCommands in
lldb-vscode.cpp, because an init command used in all tests is `settings clear -all`, which would clear the
source map unless specified after initCommands. And in any case, I think it makes sense to have initCommands
run before anything the debugger would do.
Reviewers: clayborg, kusmour, labath, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76968
Summary:
If no custom launching is used, lldb-vscode launches a program with an empty environment by default. In some scenarios, the user might want to simply use the same environment as the IDE to have a set of working environment variables (e.g. PATH wouldn't be empty). In fact, most DAPs in VSCode have this behavior by default. In other cases the user definitely needs to set their custom environment, which is already supported. To make the first case easier for the user (e.g. not having to copy the PATH to the launch.json every time they want to debug simple programs that rely on PATH), a new option is now offered. inheritEnvironment will launch the program copying its own environment, and it's just a boolean flag.
{F11347695}
Reviewers: clayborg, aadsm, diazhector98, kusmour
Subscribers: labath, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74636
A couple of tests sporadically fail on these assertions, but the error
messages do not give a clue as to what has actually happened.
Improve them so that we can better understand what is going wrong.
Summary:
Requesting registers one by one takes a while in our project.
We want to get rid of it by using target.xml.
Reviewers: jarin, labath, omjavaid
Reviewed By: labath, omjavaid
Subscribers: omjavaid, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74217
Summary:
Synthesize target.xml in lldb-server to avoid a long chain of
qRegisterInfo packets, which can be slow over low-latency links.
Reviewers: jarin, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74217
Summary:
This patch fixes logging to log incoming packets which was removed during a refactor.
We also enable logging to a "vscode.txt" file for each lldb-vscode test by creating the log file in the build artifacts directory for each test. This allows users to see the packets for their tests if needed and the log file is in a directory that will be removed after tests have been run.
Reviewers: labath, aadsm, serhiy.redko, jankratochvil, xiaobai, wallace
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74566
Summary: The VS Code DAP expects on response for each breakpoint that was requested. If we responsd with multiple entries for one breakpoint the VS Code UI gets out of date. Currently the VS code DAP doesn't handle one breakpoint with multiple locations. If this ever gets fixed we can modify our code.
Reviewers: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73665
Summary: Moves lldbsuite tests to lldb/test/API.
This is a largely mechanical change, moved with the following steps:
```
rm lldb/test/API/testcases
mkdir -p lldb/test/API/{test_runner/test,tools/lldb-{server,vscode}}
mv lldb/packages/Python/lldbsuite/test/test_runner/test lldb/test/API/test_runner
for d in $(find lldb/packages/Python/lldbsuite/test/* -maxdepth 0 -type d | egrep -v "make|plugins|test_runner|tools"); do mv $d lldb/test/API; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-vscode -maxdepth 1 -mindepth 1 | grep -v ".py"); do mv $d lldb/test/API/tools/lldb-vscode; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-server -maxdepth 1 -mindepth 1 | egrep -v "gdbremote_testcase.py|lldbgdbserverutils.py|socket_packet_pump.py"); do mv $d lldb/test/API/tools/lldb-server; done
```
lldb/packages/Python/lldbsuite/__init__.py and lldb/test/API/lit.cfg.py were also updated with the new directory structure.
Reviewers: labath, JDevlieghere
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71151
When I have symlinked builddir on Fedora 31 x86_64 I get:
FAIL: test_libraries_svr4_libs_present (TestGdbRemoteLibrariesSvr4Support.TestGdbRemoteLibrariesSvr4Support)
----------------------------------------------------------------------
...
File "lldb/packages/Python/lldbsuite/test/tools/lldb-server/libraries-svr4/TestGdbRemoteLibrariesSvr4Support.py", line 106, in
libraries_svr4_libs_present
self.assertIn(self.getBuildDir() + "/" + lib, libraries_svr4_names)
AssertionError:
'/home/jkratoch/redhat/llvm-monorepo-clangassertsymlink/lldb-test-build.noindex/tools/lldb-server/libraries-svr4/TestGdbRemoteLibrariesSvr4Support.test_libraries_svr4_libs_present/libsvr4lib_a.so' not found in ['/home/jkratoch/redhat/llvm-monorepo/lldb/packages/Python/lldbsuite/test/tools/lldb-server/libraries-svr4/linux-vdso.so.1', '/quad/home/jkratoch/redhat/llvm-monorepo-clangassertsymlink/lldb-test-build.noindex/tools/lldb-server/libraries-svr4/TestGdbRemoteLibrariesSvr4Support.test_libraries_svr4_libs_present/libsvr4lib_a.so', '/quad/home/jkratoch/redhat/llvm-monorepo-clangassertsymlink/lldb-test-build.noindex/tools/lldb-server/libraries-svr4/TestGdbRemoteLibrariesSvr4Support.test_libraries_svr4_libs_present/libsvr4lib_b".so', '/usr/lib64/libdl-2.30.so', '/usr/lib64/libstdc++.so.6.0.27', '/usr/lib64/libm-2.30.so', '/usr/lib64/libgcc_s-9-20190827.so.1', '/usr/lib64/libc-2.30.so', '/usr/lib64/ld-2.30.so']
Config=x86_64-/quad/home/jkratoch/redhat/llvm-monorepo-clangassertsymlink/bin/clang-11
----------------------------------------------------------------------
Differential Revision: https://reviews.llvm.org/D74295
Summary:
There was a bug on LLDB VSCode where there was the following behavior:
//Code
```
struct foo {
int bar:
};
...
foo my_foo = {10};
```
Trying to auto-complete my_foo.b with my_foo.bar resulted instead with my_foo.my_foo.bar
This diff fixes this bug and adds some tests to check correct behavior.
It also fixes the same bug using the arrow operator (->) when user manually requests completions.
TODO: Fix bug where no recommended completions are automatically shown with arrow operator
{F11249959}
{F11249958}
Reviewers: wallace
Reviewed By: wallace
Subscribers: teemperor, labath, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73506
Summary:
A lot of tests do this trick but the vast majority of them don't even call `print()`.
Most of this patch was generated by a script that just looks at all the files and deletes the line if there is no `print (` or `print(` anywhere else in the file.
I checked the remaining tests manually and deleted the import if we never call print (but instead do stuff like `expr print(...)` and similar false-positives).
I also corrected the additional empty lines after the import in the files that I manually edited.
Reviewers: JDevlieghere, labath, jfb
Reviewed By: labath
Subscribers: dexonsmith, wuzish, nemanjai, kbarton, christof, arphaman, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71452
"The debug adapter supports the delayed loading of parts of the stack,
which requires that both the 'startFrame' and 'levels' arguments and the
'totalFrames' result of the 'StackTrace' request are supported."
Lack of this field makes VSCode incorrectly display stack traces information
D71034
Implement major improvements to multithreaded program support. Notably,
support tracking new and exited threads, associate signals and events
with correct threads and support controlling individual threads when
resuming.
Firstly, use PT_SET_EVENT_MASK to enable reporting of created and exited
threads via SIGTRAP. Handle TRAP_LWP events to keep track
of the currently running threads.
Secondly, update the signal (both generic and SIGTRAP) handling code
to account for per-thread signals correctly. Signals delivered
to the whole process are reported on all threads, while per-thread
signals and events are reported only to the specific thread.
The remaining threads are marked as 'stopped with no reason'. Note that
NetBSD always stops all threads on debugger events.
Thirdly, implement the ability to set every thread as running, stopped
or single-stepping separately while continuing the process. This also
provides the ability to send a signal to the whole process or to one
of its thread while resuming.
Differential Revision: https://reviews.llvm.org/D70022
Summary:
The test used a non-stopping "run" command to launch the process. This
is different from the regular launch with no extra launch commands,
which uses eLaunchFlagStopAtEntry to ensure that the process stops
straight away.
I'm not really sure what's supposed to happen in non-stop-at-entry mode,
or if that's even supported, but what ended up happening was the launch
packet got a reply while the process was running. Then the test case did
a continue_to_next_stop(), which queued a *second* resume request
(along with the internal "resumes" which were being issued as a part of
normal process startup). These two resumes ended up chasing each other's
tails inside lldb in a way which produced hilarious log traces.
Surprisingly, the test ended up passing most of the time, but it did
cause spurious failures when the test seemed to miss a breakpoint.
This changes the test to use stop-at-entry mode in the manual launch
sequence too, which seems to be enough to make the test pass reliably.
Reviewers: clayborg, kusmour, jankratochvil
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70127
Implement thread name getting sysctl() on NetBSD. Also fix
the incorrect type in pthread_setname_np() in the relevant test.
Differential Revision: https://reviews.llvm.org/D70363
Summary:
The DAP has a completion request that has been unimplemented. It allows showing autocompletion tokens inside the Debug Console.
I implemented it in a very simple fashion mimicking what the user would see when autocompleting an expression inside the CLI.
There are two cases: normal variables and commands. The latter occurs when a text is prepepended with ` in the Debug Console.
These two cases work well and have tests.
Reviewers: clayborg, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D69873
The VSCode tests were all disabled on macOS because the implementation
had some issues that resulted in flakiness on Darwin. It seems most of
these issues have been addressed. I've re-enabled all the tests that
consistently passed locally.
Most of the secondary Makefiles we have are just a couple variable
definitions and then an include of Makefile.rules. This patch removes
most of the secondary Makefiles and replaces them with a direct
invocation of Makefile.rules in the main Makefile. The specificities
of each sub-build are listed right there on the recursive $(MAKE)
call. All the variables that matter are being passed automagically by
make as they have been passed on the command line. The only things you
need to specify are the variables customizating the Makefile.rules
logic for each image.
This patch also removes most of the clean logic from those Makefiles
and from Makefile.rules. The clean rule is not required anymore now
that we run the testsuite in a separate build directory that is wiped
with each run. The patch leaves a very crude version of clean in
Makefile.rules which removes everything inside of $(BUILDDIR). It does
this only when the $(BUILDDIR) looks like a sub-directory of our
standard testsuite build directory to be extra safe.
Reviewers: aprantl, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68558
llvm-svn: 374076
This test streamlines our use of variables that are expected by
Makefile.rules throughout the test suite. Mostly it replaced
potentially dangerous overrides and updates of variables like CFLAGS
with safe assignments to variables reserved for this purpose like
CFLAGS_EXTRAS.
Differential Revision: https://reviews.llvm.org/D67984
llvm-svn: 372795
Summary:
In r367234 we introduced a central place to hold the set up commands for
the various ways we have of launching lldb. However, a number of
commands still remained outside of that.
This patch moves the remaining set up commands into this function, which
allows us to remove manual clang module path setting code in
TestBatchMode.
One unfortunate victim of this approach is TestSTTYBeforeAndAfter which,
due to how it launches lldb (pexpect->expect->lldb), fails get the
quoting right. It would be possible to fix the quoting there, it would be a bit
icky, and none of the commands in this list are really relevant for what this
test is doing, so I just remove the commands outright.
Reviewers: JDevlieghere, jankratochvil
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D67173
llvm-svn: 371019
plugin.
Unfortunately the test is currently XFAILed because of missing changes
to the clang driver.
Differential Revision: https://reviews.llvm.org/D67124
llvm-svn: 370931
Summary:
Instead of each test case knowing its depth relative to the test root,
we can just have dotest add the folder containing Makefile.rules to the
include path.
This was motivated by r370616, though I have been wanting to do this
ever since we moved to building tests out-of-tree.
The only manually modified files in this patch are lldbinline.py and
plugins/builder_base.py. The rest of the patch has been produced by this
shell command:
find . \( -name Makefile -o -name '*.mk' \) -exec sed --in-place -e '/LEVEL *:\?=/d' -e '1,2{/^$/d}' -e 's,\$(LEVEL)/,,' {} +
Reviewers: teemperor, aprantl, espindola, jfb
Subscribers: emaste, javed.absar, arichardson, christof, arphaman, lldb-commits
Differential Revision: https://reviews.llvm.org/D67083
llvm-svn: 370845
It looks like running without this argument was supported
for legacy reasons, but a Xcode 11 beta made the argument
mandatory for our usecase.
llvm-svn: 369709
the platform in the setUp/tearDown methods. I want to migrate the
re-instatement of the correct plaform to the setUp base method but
haven't had time to look at that yet, so I want to land this handful
of fixes until I get to it.
Differential revision: https://reviews.llvm.org/D66331
llvm-svn: 369484
Summary:
This can help `lldb-vscode` handle launch commands associate with remote platform
attach request have field `attachCommands` to handle attach specific commands
add a corresponding one for launch request
if no launch command is provided, create a new target and launch; otherwise, execute the launch command
Differential Revision: https://reviews.llvm.org/D65363
Patch by Wanyi Ye <kusmour@gmail.com>
llvm-svn: 369296
Summary: Thanks to Hui Huang and reviewers for all the help with this patch!
Reviewers: labath, jfb, clayborg
Reviewed By: labath
Subscribers: Hui, clayborg, dexonsmith, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61687
llvm-svn: 368776
Summary: Thanks to Hui Huang and the reviewers for all the help with this patch.
Reviewers: labath, Hui, jfb, clayborg, amccarth
Reviewed By: labath
Subscribers: amccarth, compnerd, dexonsmith, mgorny, jfb, teemperor, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D63165
llvm-svn: 368759
Compare the directory paths returned by lldb-vscode against realpaths
rather than apparent paths. This matches lldb-vscode behavior
and therefore fixes test failures when one of the parent directories
of the source tree is a symlink.
Differential Revision: https://reviews.llvm.org/D65432
llvm-svn: 367291
rL357954 did increase `packet-timeout` 1sec -> 5secs. Which is IMO about the
maximum timeout reasonable for regular use. But for testsuite I think the
timeout should be higher as the testsuite runs in parallel and it can be run
even on slow hosts and with other load (moreover if it runs on some slow arch).
I have chosen 60 secs, that should be enough hopefully. Larger value could
make debugging with hanging `lldb-server` annoying.
This patch was based on this testsuite timeout:
http://lab.llvm.org:8014/builders/lldb-x86_64-fedora/builds/546/steps/test/logs/stdio
FAIL: test_connect (TestGDBRemoteClient.TestGDBRemoteClient)
Test connecting to a remote gdb server
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/TestGDBRemoteClient.py", line 13, in test_connect
process = self.connect(target)
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/gdbclientutils.py", line 480, in connect
self.assertTrue(error.Success(), error.description)
AssertionError: False is not True : failed to get reply to handshake packet
Differential Revision: https://reviews.llvm.org/D65271
llvm-svn: 367234
Mark the process as stopped when SIGSTOP arrives. This is necessary
for lldb-server to generate correct response to 'process interrupt',
and therefore to prevent the whole stack crashing when process
is stopped.
Thanks to Pavel Labath for the tip.
Differential Revision: https://reviews.llvm.org/D65289
llvm-svn: 367047
Summary: update some test decorates that can actually pass on andriod aarch64
Patch by Wanyi Ye <kusmour@gmail.com>
Differential Revision: https://reviews.llvm.org/D64767
llvm-svn: 366858
On slower machines the vscode testcases were sometimes hanging:
1910 ? Sl 0:00 | \_ /usr/bin/python .../llvm/tools/lldb/test/dotest.py ... -p TestVSCode_setBreakpoints.py
2649 ? Sl 0:00 | \_ .../build/bin/lldb-vscode
2690 ? S 0:00 | \_ .../build/bin/lldb-server gdbserver --fd=9 --native-regs --setsid
2708 ? t 0:00 | \_ .../build/lldb-test-build.noindex/tools/lldb-vscode/breakpoint/TestVSCode_setBreakpoints.test_functionality/a.out
A reproducer of the racy bug for send_recv():
# self.send_packet(command)
#+ import time
#+ time.sleep(1)
# done = False
I guess `request_continue` was probably originally intended to be synchronous
but then it isn't and this code has been leftover there.
Differential revision: https://reviews.llvm.org/D65163
llvm-svn: 366850
Summary: lldb-mi has been removed, but there are still a bunch of references in the code base. This patch removes all of them.
Reviewers: JDevlieghere, jfb
Reviewed By: JDevlieghere
Subscribers: dexonsmith, ki.stfu, mgorny, abidh, jfb, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64992
llvm-svn: 366590
D62502, together with D62503 have broken the builds which have XML
support enabled. Reverting D62503 (r364355) fixed that, but has broken
has left some of the tests introduced by D62502 broken more or less
nondeternimistically (it depended on whether the system happens to place
the library list near unreadable pages of memory). I attempted to make a
partial fix for this in r364748, but Jan Kratochvil pointed out that
this reintroduces the problem which reverting D62503 was trying to
solve.
So instead, I back out the whole thing so we can get back to a clean
slate that works for everyone. We can figure out a way forward from
there.
This reverts r364748, r363772 and r363707.
llvm-svn: 364751
Walter Erquinigo