The lifetime intrinsics need some work in order to make it clear which
optimizations are or are not valid.
For now dropping this optimization avoids a miscompilation.
Patch by Björn Steinbrink.
llvm-svn: 214336
We use gep to access the global array "switch.table", and the table index
should be treated as unsigned. When the highest bit is 1, this commit
zero-extends the index to an integer type with larger size.
For a switch on i2, we used to generate:
%switch.tableidx = sub i2 %0, -2
getelementptr inbounds [4 x i64]* @switch.table, i32 0, i2 %switch.tableidx
It is incorrect when %switch.tableidx is 2 or 3. The fix is to generate
%switch.tableidx = sub i2 %0, -2
%switch.tableidx.zext = zext i2 %switch.tableidx to i3
getelementptr inbounds [4 x i64]* @switch.table, i32 0, i3 %switch.tableidx.zext
rdar://17735071
llvm-svn: 213815
Summary: This patch introduces two new iterator ranges and updates existing code to use it. No functional change intended.
Test Plan: All tests (make check-all) still pass.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4481
llvm-svn: 213474
isSafeToSpeculativelyExecute can optionally take a DataLayout pointer. In the
past, this was mainly used to make better decisions regarding divisions known
not to trap, and so was not all that important for users concerned with "cheap"
instructions. However, now it also helps look through bitcasts for
dereferencable loads, and will also be important if/when we add a
dereferencable pointer attribute.
This is some initial work to feed a DataLayout pointer through to callers of
isSafeToSpeculativelyExecute, generally where one was already available.
llvm-svn: 212720
This patch adds to an existing loop over phi nodes in SimplifyCondBranchToCondBranch() to check for trapping ops and bails out of the optimization if we find one of those.
The test cases verify that trapping ops are not hoisted and non-trapping ops are still optimized as expected.
llvm-svn: 212490
We would previously put dllimport variables in switch lookup tables, which
doesn't work because the address cannot be used in a constant initializer.
This is basically the same problem that we have in PR19955.
Putting TLS variables in switch tables also desn't work, because the
address of such a variable is not constant.
Differential Revision: http://reviews.llvm.org/D4220
llvm-svn: 211331
Since ExtractValue is not included in ComputeSpeculationCost CFGs containing
ExtractValueInsts cannot be simplified. In particular this interacts with
InstCombineCompare's tendency to insert add.with.overflow intrinsics for
certain idiomatic math operations, preventing optimization.
This patch adds ExtractValue to the ComputeSpeculationCost. Test case included
rdar://14853450
llvm-svn: 208434
definition below all of the header #include lines, lib/Transforms/...
edition.
This one is tricky for two reasons. We again have a couple of passes
that define something else before the includes as well. I've sunk their
name macros with the DEBUG_TYPE.
Also, InstCombine contains headers that need DEBUG_TYPE, so now those
headers #define and #undef DEBUG_TYPE around their code, leaving them
well formed modular headers. Fixing these headers was a large motivation
for all of these changes, as "leaky" macros of this form are hard on the
modules implementation.
llvm-svn: 206844
This allows us to generate table lookups for code such as:
unsigned test(unsigned x) {
switch (x) {
case 100: return 0;
case 101: return 1;
case 103: return 2;
case 105: return 3;
case 107: return 4;
case 109: return 5;
case 110: return 6;
default: return f(x);
}
}
Since cases 102, 104, etc. are not constants, the lookup table has holes
in those positions. We therefore guard the table lookup with a bitmask check.
Patch by Jasper Neumann!
llvm-svn: 203694
This requires a number of steps.
1) Move value_use_iterator into the Value class as an implementation
detail
2) Change it to actually be a *Use* iterator rather than a *User*
iterator.
3) Add an adaptor which is a User iterator that always looks through the
Use to the User.
4) Wrap these in Value::use_iterator and Value::user_iterator typedefs.
5) Add the range adaptors as Value::uses() and Value::users().
6) Update *all* of the callers to correctly distinguish between whether
they wanted a use_iterator (and to explicitly dig out the User when
needed), or a user_iterator which makes the Use itself totally
opaque.
Because #6 requires churning essentially everything that walked the
Use-Def chains, I went ahead and added all of the range adaptors and
switched them to range-based loops where appropriate. Also because the
renaming requires at least churning every line of code, it didn't make
any sense to split these up into multiple commits -- all of which would
touch all of the same lies of code.
The result is still not quite optimal. The Value::use_iterator is a nice
regular iterator, but Value::user_iterator is an iterator over User*s
rather than over the User objects themselves. As a consequence, it fits
a bit awkwardly into the range-based world and it has the weird
extra-dereferencing 'operator->' that so many of our iterators have.
I think this could be fixed by providing something which transforms
a range of T&s into a range of T*s, but that *can* be separated into
another patch, and it isn't yet 100% clear whether this is the right
move.
However, this change gets us most of the benefit and cleans up
a substantial amount of code around Use and User. =]
llvm-svn: 203364
a bit surprising, as the class is almost entirely abstracted away from
any particular IR, however it encodes the comparsion predicates which
mutate ranges as ICmp predicate codes. This is reasonable as they're
used for both instructions and constants. Thus, it belongs in the IR
library with instructions and constants.
llvm-svn: 202838
I am really sorry for the noise, but the current state where some parts of the
code use TD (from the old name: TargetData) and other parts use DL makes it
hard to write a patch that changes where those variables come from and how
they are passed along.
llvm-svn: 201827
When simplifycfg moves an instruction, it must drop metadata it doesn't know
is still valid with the preconditions changes. In particular, it must drop
the range and tbaa metadata.
The patch implements this with an utility function to drop all metadata not
in a white list.
llvm-svn: 200322
uint32.
When folding branches to common destination, the updated branch weights
can exceed uint32 by more than factor of 2. We should keep halving the
weights until they can fit into uint32.
llvm-svn: 200262
There has been an old FIXME to find the right cut-off for when it's worth
analyzing and potentially transforming a switch to a lookup table.
The switches always have two or more cases. I could not measure any speed-up
by transforming a switch with two cases. A switch with three cases gets a nice
speed-up, and I couldn't measure any compile-time regression, so I think this
is the right threshold.
In a Clang self-host, this causes 480 new switches to be transformed,
and reduces the final binary size with 8 KB.
llvm-svn: 199294
case when the lookup table doesn't have any holes.
This means we can build a lookup table for switches like this:
switch (x) {
case 0: return 1;
case 1: return 2;
case 2: return 3;
case 3: return 4;
default: exit(1);
}
The default case doesn't yield a constant result here, but that doesn't matter,
since a default result is only necessary for filling holes in the lookup table,
and this table doesn't have any holes.
This makes us transform 505 more switches in a clang bootstrap, and shaves 164 KB
off the resulting clang binary.
llvm-svn: 199025
If we happen to eliminate every case in a switch that has branch
weights, we currently try to create metadata for the one remaining
branch, triggering an assert. Instead, we need to check that the
metadata we're trying to create is sensible.
llvm-svn: 197791
One optimization simplify-cfg performs is the converting of switches to
lookup tables if the switch has > 4 cases. This is done by:
1. Finding the max/min case value and calculating the switch case range.
2. Create a lookup table basic block.
3. Perform a check in the switch's BB to see if the input value is in
the switch's case range. If the input value satisfies said predicate
branch to the lookup table BB, otherwise branch to the switch's default
destination BB using the default value as the result.
The conditional check consists of subtracting the min case value of the
table from any input iN value and then ensuring that said value is
unsigned less than the size of the lookup table represented as an iN
value.
If the lookup table is a covered lookup table, the size of the table will be N
which is 0 as an iN value. Thus the comparison will be an `icmp ult` of an iN
value against 0 which is always false yielding the incorrect result.
This patch fixes this problem by recognizing if we have a covered lookup table
and if we do, unconditionally jumps to the lookup table BB since the covering
property of the lookup table implies no input values could not be handled by
said BB.
rdar://15268442
llvm-svn: 193045
This makes using array_pod_sort significantly safer. The implementation relies
on function pointer casting but that should be safe as we're dealing with void*
here.
llvm-svn: 191175
Merge consecutive if-regions if they contain identical statements.
Both transformations reduce number of branches. The transformation
is guarded by a target-hook, and is currently enabled only for +R600,
but the correctness has been tested on X86 target using a variety of
CPU benchmarks.
Patch by: Mei Ye
llvm-svn: 187278
This allows us to create switches even if instcombine has munged two of the
incombing compares into one and some bit twiddling. This was motivated by enum
compares that are common in clang.
llvm-svn: 185632
The problem this time seems to be a thinko. We were assuming that in the CFG
A
| \
| B
| /
C
speculating the basic block B would cause only the phi value for the B->C edge
to be speculated. That is not true, the phi's are semantically in the edges, so
if the A->B->C path is taken, any code needed for A->C is not executed and we
have to consider it too when deciding to speculate B.
llvm-svn: 183226
PR16069 is an interesting case where an incoming value to a PHI is a
trap value while also being a 'ConstantExpr'.
We do not consider this case when performing the 'HoistThenElseCodeToIf'
optimization.
Instead, make our modifications more conservative if we detect that we
cannot transform the PHI to a select.
llvm-svn: 183152
This resurrects r179957, but adds code that makes sure we don't touch
atomic/volatile stores:
This transformation will transform a conditional store with a preceeding
uncondtional store to the same location:
a[i] =
may-alias with a[i] load
if (cond)
a[i] = Y
into an unconditional store.
a[i] = X
may-alias with a[i] load
tmp = cond ? Y : X;
a[i] = tmp
We assume that on average the cost of a mispredicted branch is going to be
higher than the cost of a second store to the same location, and that the
secondary benefits of creating a bigger basic block for other optimizations to
work on outway the potential case where the branch would be correctly predicted
and the cost of the executing the second store would be noticably reflected in
performance.
hmmer's execution time improves by 30% on an imac12,2 on ref data sets. With
this change we are on par with gcc's performance (gcc also performs this
transformation). There was a 1.2 % performance improvement on a ARM swift chip.
Other tests in the test-suite+external seem to be mostly uninfluenced in my
experiments:
This optimization was triggered on 41 tests such that the executable was
different before/after the patch. Only 1 out of the 40 tests (dealII) was
reproducable below 100% (by about .4%). Given that hmmer benefits so much I
believe this to be a fair trade off.
llvm-svn: 180731
There is the temptation to make this tranform dependent on target information as
it is not going to be beneficial on all (sub)targets. Therefore, we should
probably do this in MI Early-Ifconversion.
This reverts commit r179957. Original commit message:
"SimplifyCFG: If convert single conditional stores
This transformation will transform a conditional store with a preceeding
uncondtional store to the same location:
a[i] =
may-alias with a[i] load
if (cond)
a[i] = Y
into an unconditional store.
a[i] = X
may-alias with a[i] load
tmp = cond ? Y : X;
a[i] = tmp
We assume that on average the cost of a mispredicted branch is going to be
higher than the cost of a second store to the same location, and that the
secondary benefits of creating a bigger basic block for other optimizations to
work on outway the potential case were the branch would be correctly predicted
and the cost of the executing the second store would be noticably reflected in
performance.
hmmer's execution time improves by 30% on an imac12,2 on ref data sets. With
this change we are on par with gcc's performance (gcc also performs this
transformation). There was a 1.2 % performance improvement on a ARM swift chip.
Other tests in the test-suite+external seem to be mostly uninfluenced in my
experiments:
This optimization was triggered on 41 tests such that the executable was
different before/after the patch. Only 1 out of the 40 tests (dealII) was
reproducable below 100% (by about .4%). Given that hmmer benefits so much I
believe this to be a fair trade off.
I am going to watch performance numbers across the builtbots and will revert
this if anything unexpected comes up."
llvm-svn: 179980
This transformation will transform a conditional store with a preceeding
uncondtional store to the same location:
a[i] =
may-alias with a[i] load
if (cond)
a[i] = Y
into an unconditional store.
a[i] = X
may-alias with a[i] load
tmp = cond ? Y : X;
a[i] = tmp
We assume that on average the cost of a mispredicted branch is going to be
higher than the cost of a second store to the same location, and that the
secondary benefits of creating a bigger basic block for other optimizations to
work on outway the potential case were the branch would be correctly predicted
and the cost of the executing the second store would be noticably reflected in
performance.
hmmer's execution time improves by 30% on an imac12,2 on ref data sets. With
this change we are on par with gcc's performance (gcc also performs this
transformation). There was a 1.2 % performance improvement on a ARM swift chip.
Other tests in the test-suite+external seem to be mostly uninfluenced in my
experiments:
This optimization was triggered on 41 tests such that the executable was
different before/after the patch. Only 1 out of the 40 tests (dealII) was
reproducable below 100% (by about .4%). Given that hmmer benefits so much I
believe this to be a fair trade off.
I am going to watch performance numbers across the builtbots and will revert
this if anything unexpected comes up.
llvm-svn: 179957
If a switch instruction has a case for every possible value of its type,
with the same successor, SimplifyCFG would replace it with an icmp ult,
but the computation of the bound overflows in that case, which inverts
the test.
Patch by Jed Davis!
llvm-svn: 179587
Fixes rdar:13349374.
Volatile loads and stores need to be preserved even if the language
standard says they are undefined. "volatile" in this context means "get
out of the way compiler, let my platform handle it".
Additionally, this is the only way I know of with llvm to write to the
first page (when hardware allows) without dropping to assembly.
llvm-svn: 176599
loops over instructions in the basic block or the use-def list of the
value, neither of which are really efficient when repeatedly querying
about values in the same basic block.
What's more, we already know that the CondBB is small, and so we can do
a much more efficient test by counting the uses in CondBB, and seeing if
those account for all of the uses.
Finally, we shouldn't blanket fail on any such instruction, instead we
should conservatively assume that those instructions are part of the
cost.
Note that this actually fixes a bug in the pass because
isUsedInBasicBlock has a really terrible bug in it. I'll fix that in my
next commit, but the fix for it would make this code suddenly take the
compile time hit I thought it already was taking, so I wanted to go
ahead and migrate this code to a faster & better pattern.
The bug in isUsedInBasicBlock was also causing other tests to test the
wrong thing entirely: for example we weren't actually disabling
speculation for floating point operations as intended (and tested), but
the test passed because we failed to speculate them due to the
isUsedInBasicBlock failure.
llvm-svn: 173417
Original commit message:
Plug TTI into the speculation logic, giving it a real cost interface
that can be specialized by targets.
The goal here is not to be more aggressive, but to just be more accurate
with very obvious cases. There are instructions which are known to be
truly free and which were not being modeled as such in this code -- see
the regression test which is distilled from an inner loop of zlib.
Everywhere the TTI cost model is insufficiently conservative I've added
explicit checks with FIXME comments to go add proper modelling of these
cost factors.
If this causes regressions, the likely solution is to make TTI even more
conservative in its cost estimates, but test cases will help here.
llvm-svn: 173357
that can be specialized by targets.
The goal here is not to be more aggressive, but to just be more accurate
with very obvious cases. There are instructions which are known to be
truly free and which were not being modeled as such in this code -- see
the regression test which is distilled from an inner loop of zlib.
Everywhere the TTI cost model is insufficiently conservative I've added
explicit checks with FIXME comments to go add proper modelling of these
cost factors.
If this causes regressions, the likely solution is to make TTI even more
conservative in its cost estimates, but test cases will help here.
llvm-svn: 173342
a cost fuction that seems both a bit ad-hoc and also poorly suited to
evaluating constant expressions.
Notably, it is missing any support for trivial expressions such as
'inttoptr'. I could fix this routine, but it isn't clear to me all of
the constraints its other users are operating under.
The core protection that seems relevant here is avoiding the formation
of a select instruction wich a further chain of select operations in
a constant expression operand. Just explicitly encode that constraint.
Also, update the comments and organization here to make it clear where
this needs to go -- this should be driven off of real cost measurements
which take into account the number of constants expressions and the
depth of the constant expression tree.
llvm-svn: 173340
terms of cost rather than hoisting a single instruction.
This does *not* change the cost model! We still set the cost threshold
at 1 here, it's just that we track it by accumulating cost rather than
by storing an instruction.
The primary advantage is that we no longer leave no-op intrinsics in the
basic block. For example, this will now move both debug info intrinsics
and a single instruction, instead of only moving the instruction and
leaving a basic block with nothing bug debug info intrinsics in it, and
those intrinsics now no longer ordered correctly with the hoisted value.
Instead, we now splice the entire conditional basic block's instruction
sequence.
This also places the code for checking the safety of hoisting next to
the code computing the cost.
Currently, the only observable side-effect of this change is that debug
info intrinsics are no longer abandoned. I'm not sure how to craft
a test case for this, and my real goal was the refactoring, but I'll
talk to Dave or Eric about how to add a test case for this.
llvm-svn: 173339
Previously, the code would scan the PHI nodes and build up a small
setvector of candidate value pairs in phi nodes to go and rewrite. Once
certain the rewrite could be performed, the code walks the set, and for
each one re-scans the entire PHI node list looking for nodes to rewrite
operands.
Instead, scan the PHI nodes once to check for hazards, and then scan it
a second time to rewrite the operands to selects. No set vector, and
a max of two scans.
The only downside is that we might form identical selects, but
instcombine or anything else should fold those easily, and it seems
unlikely to happen often.
llvm-svn: 173337
pretty in doxygen, adding some of the details actually present in
a classic example where this matters (a loop from gzip and many other
compression algorithms), and a cautionary note about the risks inherent
in the transform. This has come up on the mailing lists recently, and
I suspect folks reading this code could benefit from going and looking
at the MI pass that can really deal with these issues.
llvm-svn: 173329
used uninitialized, since it fails to understand that Array is only used when
SingleValue is not, and outputs a warning. It also seems generally safer given
that the constructor is non-trivial and has plenty of early exits.
llvm-svn: 173242
through as a reference rather than a pointer. There is always *some*
implementation of this available, so this simplifies code by not having
to test for whether it is available or not.
Further, it turns out there were piles of places where SimplifyCFG was
recursing and not passing down either TD or TTI. These are fixed to be
more pedantically consistent even though I don't have any particular
cases where it would matter.
llvm-svn: 171691
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
llvm-svn: 169131
We're iterating over a non-deterministically ordered container looking
for two saturating flags. To do this correctly, we have to saturate
both, and only stop looping if both saturate to their final value.
Otherwise, which flag we see first changes the result.
This is also a micro-optimization of the previous version as now we
don't go into the (possibly expensive) test logic once the first
violation of either constraint is detected.
llvm-svn: 168989
functionality changed.
Evan's commit r168970 moved the code that the primary comment in this
function referred to to the other end of the function without moving the
comment, and there has been a steady creep of "boolean" logic in it that
is simpler if handled via early exit. That way each special case can
have its own comments. I've also made the variable name a bit more
explanatory than "AllFit". This is in preparation to fix the
non-deterministic output of this function.
llvm-svn: 168988
getIntPtrType support for multiple address spaces via a pointer type,
and also introduced a crasher bug in the constant folder reported in
PR14233.
These commits also contained several problems that should really be
addressed before they are re-committed. I have avoided reverting various
cleanups to the DataLayout APIs that are reasonable to have moving
forward in order to reduce the amount of churn, and minimize the number
of commits that were reverted. I've also manually updated merge
conflicts and manually arranged for the getIntPtrType function to stay
in DataLayout and to be defined in a plausible way after this revert.
Thanks to Duncan for working through this exact strategy with me, and
Nick Lewycky for tracking down the really annoying crasher this
triggered. (Test case to follow in its own commit.)
After discussing with Duncan extensively, and based on a note from
Micah, I'm going to continue to back out some more of the more
problematic patches in this series in order to ensure we go into the
LLVM 3.2 branch with a reasonable story here. I'll send a note to
llvmdev explaining what's going on and why.
Summary of reverted revisions:
r166634: Fix a compiler warning with an unused variable.
r166607: Add some cleanup to the DataLayout changes requested by
Chandler.
r166596: Revert "Back out r166591, not sure why this made it through
since I cancelled the command. Bleh, sorry about this!
r166591: Delete a directory that wasn't supposed to be checked in yet.
r166578: Add in support for getIntPtrType to get the pointer type based
on the address space.
llvm-svn: 167221
By propagating the value for the switch condition, LLVM can now build
lookup tables for code such as:
switch (x) {
case 1: return 5;
case 2: return 42;
case 3: case 4: case 5:
return x - 123;
default:
return 123;
}
Given that x is known for each case, "x - 123" becomes a constant for
cases 3, 4, and 5.
llvm-svn: 167115
When the switch-to-lookup tables transform landed in SimplifyCFG, it
was pointed out that this could be inappropriate for some targets.
Since there was no way at the time for the pass to know anything about
the target, an awkward reverse-transform was added in CodeGenPrepare
that turned lookup tables back into switches for some targets.
This patch uses the new TargetTransformInfo to determine if a
switch should be transformed, and removes
CodeGenPrepare::ConvertLoadToSwitch.
llvm-svn: 167011
wrapper returns a vector of integers when passed a vector of pointers) by having
getIntPtrType itself return a vector of integers in this case. Outside of this
wrapper, I didn't find anywhere in the codebase that was relying on the old
behaviour for vectors of pointers, so give this a whirl through the buildbots.
llvm-svn: 166939
The isValueEqualityComparison() guard at the top of SimplifySwitch()
only applies to some of the possible transformations.
The newer transformations work just fine on large switches, and the
check on predecessor count is nonsensical.
llvm-svn: 166710
When all cases of a switch statement are dead, the weights vector only has one
element, and we will get an ssertion failure when calling createBranchWeights.
llvm-svn: 165759
Craig Topper