The `HashBuilder` interface allows conveniently building hashes of various data
types, without relying on the underlying hasher type to know about hashed data
types.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D106910
Reset cl::Positional, cl::Sink and cl::ConsumeAfter options as well in cl::ResetCommandLineParser().
Reviewed By: rriddle, sammccall
Differential Revision: https://reviews.llvm.org/D103356
Some files still contained the old University of Illinois Open Source
Licence header. This patch replaces that with the Apache 2 with LLVM
Exception licence.
Differential Revision: https://reviews.llvm.org/D107528
This allows users accessing options in libSupport before invoking
`cl::ParseCommandLineOptions`, and also matches the behavior before
D105959.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D106334
This patch adds support for the next-generation arch14
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Detection of arch14 as host processor.
- Assembler/disassembler support for new instructions.
- New LLVM intrinsics for certain new instructions.
- Support for low-level builtins mapped to new LLVM intrinsics.
- New high-level intrinsics in vecintrin.h.
- Indicate support by defining __VEC__ == 10304.
Note: No currently available Z system supports the arch14
architecture. Once new systems become available, the
official system name will be added as supported -march name.
fixed fields with highly-aligned flexible fields.
The code was not considering the possibility that aligning
the current offset to the alignment of a queue might push
us past the end of the gap. Subtracting the offsets to
figure out the maximum field size for the gap then overflowed,
making us think that we had nearly unbounded space to fill.
Fixes PR 51131.
Code in getCPUNameFromS390Model currently assumes that the
numerical value of the model number always increases with
future hardware. While this has happened to be the case
with the last few machines, it is not guaranteed -- that
assumption was violated with (much) older machines, and
it can be violated again with future machines.
Fix by explicitly listing model numbers for all supported
machine models.
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.
Reviewed By: lattner, jpienaar
Differential Revision: https://reviews.llvm.org/D105959
First patch in a series adding MC layer support for the Arm Scalable
Matrix Extension.
This patch adds the following features:
sme, sme-i64, sme-f64
The sme-i64 and sme-f64 flags are for the optional I16I64 and F64F64
features.
If a target supports I16I64 then the following instructions are
implemented:
* 64-bit integer ADDHA and ADDVA variants (D105570).
* SMOPA, SMOPS, SUMOPA, SUMOPS, UMOPA, UMOPS, USMOPA, and USMOPS
instructions that accumulate 16-bit integer outer products into 64-bit
integer tiles.
If a target supports F64F64 then the FMOPA and FMOPS instructions that
accumulate double-precision floating-point outer products into
double-precision tiles are implemented.
Outer products are implemented in D105571.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D105569
This patch makes the operations on InstructionCost saturate, so that when
costs are accumulated they saturate to <max value>.
One of the compelling reasons for wanting to have saturation support
is because in various places, arbitrary values are used to represent
a 'high' cost, but when accumulating the cost of some set of operations
or a loop, overflow is not taken into account, which may lead to unexpected
results. By defining the operations to saturate, we can express the cost
of something 'very expensive' as InstructionCost::getMax().
Reviewed By: kparzysz, dmgreen
Differential Revision: https://reviews.llvm.org/D105108
C++23 will make these conversions ambiguous - so fix them to make the
codebase forward-compatible with C++23 (& a follow-up change I've made
will make this ambiguous/invalid even in <C++23 so we don't regress
this & it generally improves the code anyway)
This adds a new llvm::thread class with the same interface as std::thread
except there is an extra constructor that allows us to set the new thread's
stack size. On Darwin even the default size is boosted to 8MB to match the main
thread.
It also switches all users of the older C-style `llvm_execute_on_thread` API
family over to `llvm::thread` followed by either a `detach` or `join` call and
removes the old API.
Moved definition of DefaultStackSize into the .cpp file to hopefully
fix the build on some (GCC-6?) machines.
This adds a new llvm::thread class with the same interface as std::thread
except there is an extra constructor that allows us to set the new thread's
stack size. On Darwin even the default size is boosted to 8MB to match the main
thread.
It also switches all users of the older C-style `llvm_execute_on_thread` API
family over to `llvm::thread` followed by either a `detach` or `join` call and
removes the old API.
On AIX the alignment implementation has the storage aligned to the
preferred alignment instead of the alignment of a type. Macro guard
these tests for AIX and have them pass when the "reference alignment" is
less than or equal to the alignment observed. In other words, the
alignment applied is at least as strict as the required alignment.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D104786
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
I cannot find documentation on this CPU, and it
is not supported by the Arm Compiler 5 product either.
It was likely a mistake or a different name for the
"ep9312", which is an Arm based Cirrus Logic chip.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D103024
On z/OS, umask() returns an int because mode_t is type int, however it is being compared to an unsigned int. This patch fixes the following warning we see when compiling Path.cpp.
```
comparison of integers of different signs: 'const int' and 'const unsigned int'
```
Reviewed By: muiez
Differential Revision: https://reviews.llvm.org/D102326
CommandLine.h is indirectly included in ~50% of TUs when building
clang, and VirtualFileSystem.h is large.
(Already remarked by jhenderson on D70769.)
No behavior change.
Differential Revision: https://reviews.llvm.org/D100957
apple-m1 has the same level of ISA support as apple-a14,
so this is a straightforward mechanical change. However, that
also means this inherits apple-a14's v8.5a+nobti quirkiness.
rdar://68287159
Update llvm::sys::fs::mapped_file_region to have a move constructor and
a move assignment operator, allowing it to be used as an Optional. Also,
update FileOutputBuffer's OnDiskBuffer to take advantage of this,
avoiding an extra allocation from the unique_ptr.
A nice follow-up would be to make the mapped_file_region constructor
private and replace its use with a factory function, such as
mapped_file_region::create(), that returns an Expected (or ErrorOr). I
don't plan on doing that immediately, but I might swing back later.
No functionality change, besides the saved allocation in OnDiskBuffer.
Differential Revision: https://reviews.llvm.org/D100159
Any given Windows system will have only one "system" encoding for
UTF-16 (BE or LE), so the assert for the other one would always
show up as rotten. Use a common assertion for both paths to avoid
this.
Add a variant of `fs::resize_file` for use immediately before opening a
file with `mapped_file_region::readwrite`. On Windows, `_chsize`
(`ftruncate`) is slow, but `CreateFileMapping` (`mmap`) automatically
extends the file so the call to `fs::resize_file` can be skipped.
This optimization was added to `FileOutputBuffer` in
da9bc2e56d5a5c6332a9def1a0065eb399182b93; this commit just extracts the
logic out and adds a unit test.
Differential Revision: https://reviews.llvm.org/D95490
As D99834 was meant specifically for FreeBSD, which still uses the older
non-trivial std::pair copy constructors, test for `__FreeBSD__` instead
of relying on a macro which is an internal detail of libc++.
Noted by Louis Dionne.
Problem:
On SystemZ we need to open text files in text mode. On Windows, files opened in text mode adds a CRLF '\r\n' which may not be desirable.
Solution:
This patch adds two new flags
- OF_CRLF which indicates that CRLF translation is used.
- OF_TextWithCRLF = OF_Text | OF_CRLF indicates that the file is text and uses CRLF translation.
Developers should now use either the OF_Text or OF_TextWithCRLF for text files and OF_None for binary files. If the developer doesn't want carriage returns on Windows, they should use OF_Text, if they do want carriage returns on Windows, they should use OF_TextWithCRLF.
So this is the behaviour per platform with my patch:
z/OS:
OF_None: open in binary mode
OF_Text : open in text mode
OF_TextWithCRLF: open in text mode
Windows:
OF_None: open file with no carriage return
OF_Text: open file with no carriage return
OF_TextWithCRLF: open file with carriage return
The Major change is in llvm/lib/Support/Windows/Path.inc to only set text mode if the OF_CRLF is set.
```
if (Flags & OF_CRLF)
CrtOpenFlags |= _O_TEXT;
```
These following files are the ones that still use OF_Text which I left unchanged. I modified all these except raw_ostream.cpp in recent patches so I know these were previously in Binary mode on Windows.
./llvm/lib/Support/raw_ostream.cpp
./llvm/lib/TableGen/Main.cpp
./llvm/tools/dsymutil/DwarfLinkerForBinary.cpp
./llvm/unittests/Support/Path.cpp
./clang/lib/StaticAnalyzer/Core/HTMLDiagnostics.cpp
./clang/lib/Frontend/CompilerInstance.cpp
./clang/lib/Driver/Driver.cpp
./clang/lib/Driver/ToolChains/Clang.cpp
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99426
As FreeBSD already used libc++ before it changed its ABI, we still use
the non-trivially copyable version of std::pair, which used to be
exposed via `_LIBCPP_TRIVIAL_PAIR_COPY_CTOR`, but more recently via
`_LIBCPP_DEPRECATED_ABI_DISABLE_PAIR_TRIVIAL_COPY_CTOR`.
Reviewed By: serge-sans-paille
Differential Revision: https://reviews.llvm.org/D99834
The function utilizes Windows' SearchPathW function, which as I found out today, may also return directories. After looking at the Unix implementation of the file I found that it contains a check whether the found path is also executable. While fixing the Windows implementation, I also learned that sys::fs::access returns successfully when querying whether directories are executable, which the Unix version does not.
This patch makes both of these functions equivalent to their Unix implementation and insures that any path returned by sys::findProgramByName on Windows may only be executable, just like the Unix implementation.
The equivalent additions I have made to the Windows implementation, in the Unix implementation are here:
sys::findProgramByName: 39ecfe6143/llvm/lib/Support/Unix/Program.inc (L90)
sys::fs::access: c2a84771bb/llvm/lib/Support/Unix/Path.inc (L608)
I encountered this issue when running the LLVM testsuite. Commands of the form not test ... would fail to correctly execute test.exe, which is part of GnuWin32, as it actually tried to execute a folder called test, which happened to be in a directory on my PATH.
Differential Revision: https://reviews.llvm.org/D99357
writeToOutput function is useful when it is necessary to create different kinds
of streams(based on stream name) and when we need to use a temporary file
while writing(which would be renamed into the resulting file in a success case).
This patch moves the writeToStream helper into the Support library.
Differential Revision: https://reviews.llvm.org/D98426
This test currently fails to compile when using a MinGW toolchain as setenv is not defined. This function is a POSIX function Windows does not implement.
This patch enables the setenv macro used in the unit test for all of Windows, making the test compile and run successfully.
Differential Revision: https://reviews.llvm.org/D98271
This reverts commit 7479a2e00b.
This commit causes compile errors on clang-x64-windows-msvc, so I'm
reverting the patch for now.
For reference, the error in question is:
```
error C2280: 'llvm::raw_ostream_iterator<char,char>
&llvm::raw_ostream_iterator<char,char>::operator =(const
llvm::raw_ostream_iterator<char,char> &)': attempting to reference a deleted
function
note: compiler has generated 'llvm::raw_ostream_iterator<char,char>::operator ='
here
note: 'llvm::raw_ostream_iterator<char,char>
&llvm::raw_ostream_iterator<char,char>::operator =(const
llvm::raw_ostream_iterator<char,char> &)': function was implicitly deleted
because 'llvm::raw_ostream_iterator<char,char>' has a data member
'llvm::raw_ostream_iterator<char,char>::OutStream' of reference type
```
Alexandre Rames