Adding the switches to reduce diffs. I'm about to split that into an lshr part and an ashr part, doing the NFC part first makes it easier to maintain both diffs.
As being discussed in https://reviews.llvm.org/D100721,
this modelling is lossy, we can't reconstruct `ash`/`ashr exact`
from it, which means that whenever we actually expand the IR,
we've just pessimized the code..
It would be good to model this pattern, after all it comes up every time
you want to compute a distance between two pointers, but not at this cost.
This reverts commit ec54867df5.
I've run into some cases where a large fraction of compile-time is
spent invalidating SCEV. One of the causes is forgetLoop(), which
walks all values that are def-use reachable from the loop header
phis. When invalidating a topmost loop, that might be close to all
values in a function. Additionally, it's fairly common for there to
not actually be anything to invalidate, but we'll still be performing
this walk again and again.
My first thought was that we don't need to continue walking the uses
if the current value doesn't have a SCEV expression. However, this
isn't quite right, because SCEV construction can skip over values
(e.g. for a chain of adds, we might only create a SCEV expression
for the final value).
What this patch does instead is to only walk the (full) def-use chain
of loop phis that have a SCEV expression. If there's no expression
for a phi, then we also don't have any dependent expressions to
invalidate.
Differential Revision: https://reviews.llvm.org/D100264
"Does the predicate hold between two ranges?"
Not very surprisingly, some places were already doing this check,
without explicitly naming the algorithm, cleanup them all.
"Does the predicate hold between two ranges?"
Not very surprisingly, some places were already doing this check,
without explicitly naming the algorithm, cleanup them all.
A value from reachable block may come to a Phi node as its input from
unreachable block. This may confuse matchSimpleRecurrence which
has no access to DomTree and can falsely recognize something as a recurrency
because of this effect, as the attached test shows.
Patch `ae7b1e` deals with half of this problem, but it only accounts from
the case when an unreachable instruction comes to Phi as an input.
This patch provides a generalization by checking that no Phi block's
predecessor is unreachable (no matter what the input is).
Differential Revision: https://reviews.llvm.org/D99929
Reviewed By: reames
This fixes an issue introduced with my change d4648e, and reported in pr49768.
The root problem is that dominance collapses in unreachable code, and that LoopInfo explicitly only models reachable code. Since the recurrence matcher doesn't filter by reachability (and can't easily because not all consumers have domtree), we need to bailout before assuming that finding a recurrence implies we found a loop.
SCEV currently tries to prove implications of x pred y by also
trying to imply ~y pred ~x. This is expensive in terms of
compile-time (in fact, the majority of isImpliedCond compile-time
is spent here) and generally not fruitful. The issue is that this
also swaps the operands and thus breaks canonical ordering. If
originally we were trying to prove an implication like
X > C1 -> Y > C2, then we'll now try to prove X > C1 -> C3 > ~Y,
which will not work.
The only real case where we can get some use out of this transform
is if the original conditions were in the form X > C1 -> Y < C2, were
then swapped to X > C1 -> C2 > Y and are then swapped again here to
X > C1 -> ~Y > C3.
As such, handle this at a higher level, where we are doing the
swapping in the first place. There's four different ways that we
can line up a predicate and a swapped predicate, so we use some
heuristics to pick some profitable way.
Because we now try this transform at a higher level
(isImpliedCondOperands rather than isImpliedCondOperandsHelper),
we can also prove additional facts. Of the added tests, one was
proven previously while the other wasn't.
Differential Revision: https://reviews.llvm.org/D90926
This patch exploits the knowledge that we may be running many fewer than bitwidth iterations of the loop, and may be able to disallow the overflow case. This patch specifically implements only the shl case, but this can be generalized to ashr and lshr without difficulty.
Differential Revision: https://reviews.llvm.org/D98222
By definition of Implication operator, `false -> true` and `false -> false`. It means that
`false` implies any predicate, no matter true or false. We don't need to go any further
trying to prove the statement we need and just always say that `false` implies it in this case.
In practice it means that we are trying to prove something guarded by `false` condition,
which means that this code is unreachable, and we can safely prove any fact or perform any
transform in this code.
Differential Revision: https://reviews.llvm.org/D98706
Reviewed By: lebedev.ri
Provides API that allows to check predicate for being true or
false with one call. Current implementation is naive and just
calls isKnownPredicate twice, but further we can rework this
logic trying to use one check to prove both facts.
One of (and primary) callers of isBasicBlockEntryGuardedByCond is
isKnownPredicateAt, which makes isKnownPredicate check before it.
It already makes non-recursive check inside. So, on this execution
path this check is made twice. The only other caller is
isLoopEntryGuardedByCond. Moving the check there should save some
compile time.
This reverts commit 329aeb5db4,
and relands commit 61f006ac65.
This is a continuation of D89456.
As it was suggested there, now that SCEV models `PtrToInt`,
we can try to improve SCEV's pointer handling.
In particular, i believe, i will need this in the future
to further fix `SCEVAddExpr`operation type handling.
This removes special handling of `ConstantPointerNull`
from `ScalarEvolution::createSCEV()`, and add constant folding
into `ScalarEvolution::getPtrToIntExpr()`.
This way, `null` constants stay as such in SCEV's,
but gracefully become zero integers when asked.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D98147
This is a continuation of D89456.
As it was suggested there, now that SCEV models `PtrToInt`,
we can try to improve SCEV's pointer handling.
In particular, i believe, i will need this in the future
to further fix `SCEVAddExpr`operation type handling.
This removes special handling of `ConstantPointerNull`
from `ScalarEvolution::createSCEV()`, and add constant folding
into `ScalarEvolution::getPtrToIntExpr()`.
This way, `null` constants stay as such in SCEV's,
but gracefully become zero integers when asked.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D98147
This was suggested by lebedev.ri over on D96534. You'll note lack of tests. During review, we weren't actually able to find a case which exercises it, but both I and lebedev.ri feel it's a reasonable change, straight forward, and near free.
Differential Revision: https://reviews.llvm.org/D97064
When computing a range for a SCEVUnknown, today we use computeKnownBits for unsigned ranges, and computeNumSignBots for signed ranges. This means we miss opportunities to improve range results.
One common missed pattern is that we have a signed range of a value which CKB can determine is positive, but CNSB doesn't convey that information. The current range includes the negative part, and is thus double the size.
Per the removed comment, the original concern which delayed using both (after some code merging years back) was a compile time concern. CTMark results (provided by Nikita, thanks!) showed a geomean impact of about 0.1%. This doesn't seem large enough to avoid higher quality results.
Differential Revision: https://reviews.llvm.org/D96534
This reverts commit b7d870eae7 and the
subsequent fix "[Polly] Fix build after AssumptionCache change (D96168)"
(commit e6810cab09).
It caused indeterminism in the output, such that e.g. the
polly-x86_64-linux buildbot failed accasionally.
The AssumptionCache mechanism is used to feed assumes into known bits computations. Most places in SCEV passed it in, but one place appears to have been missed.
Spotted via inspection, don't have a test case which actually exercises this, but it seemed like an obvious fixit.
PR49043 exposed a problem when it comes to RAUW llvm.assumes. While
D96106 would fix it for GVNSink, it seems a more general concern. To
avoid future problems this patch moves away from the vector of weak
reference model used in the assumption cache. Instead, we track the
llvm.assume calls with a callback handle which will remove itself from
the cache if the call is deleted.
Fixes PR49043.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D96168
Extend applyLoopGuards() to take into account conditions/assumes proving some
value %v to be divisible by D by rewriting %v to (%v / D) * D. This lets the
loop unroller and the loop vectorizer identify more loops as not requiring
remainder loops.
Differential Revision: https://reviews.llvm.org/D95521
We use `EquivalenceClasses` to cache the notion that two SCEVs are equivalent,
so save time in situation when `A` is equivalent to `B` and `B` is equivalent to `C`,
making check "if `A` is equivalent to `C`?" cheaper.
We also return `0` in the comparator when we reach max analysis depth to save
compile time. After doing this, we also cache them as being equivalent.
Now, imagine the following situation:
- `A` is proved equivalent to `B`;
- `C` is proved equivalent to `D`;
- Comparison of `A` against `D` is proved non-zero;
- Comparison of `B` against `C` reaches max depth (and gets cached as equivalence).
Now, before the invocation of compare(`B`, `C`), `A` and `D` belonged
to different equivalence classes, and their comparison returned non-zero.
After the the invocation of compare(`B`, `C`), equivalence classes get merged
and `A`, `B`, `C` and `D` all fall into the same equivalence class. So the comparator
will change its behavior for couple `A` and `D`, with weird consequences following it.
This comparator is finally used in `std::stable_sort`, and this behavior change
makes it crash (looks like it's causing a memory corruption).
Solution: this patch changes `CompareSCEVComplexity` to return `None`
when the max depth is reached. So in this case, we do not cache these SCEVs
(and their parents in the tree) as being equivalent.
Differential Revision: https://reviews.llvm.org/D94654
Reviewed By: lebedev.ri
In computeLoadConstantCompareExitLimit, the addrec used to compute the
exit count should be from the loop which the exiting block belongs to.
Reviewed by: mkazantsev
Differential Revision: https://reviews.llvm.org/D92367
Let getTruncateExpr() short-circuit to zero when the value being truncated is
known to have at least as many trailing zeros as the target type.
Differential Revision: https://reviews.llvm.org/D93973
This patch makes SCEV recognize 'select A, B, false' and 'select A, true, B'.
This is a performance improvement that will be helpful after unsound select -> and/or transformation is removed, as discussed in D93065.
SCEV's answers for the select form should be a bit more conservative than the equivalent `and A, B` / `or A, B`.
Take this example: https://alive2.llvm.org/ce/z/NsP9ue .
To check whether it is valid for SCEV's computeExitLimit to return min(n, m) as ExactNotTaken value, I put llvm.assume at tgt.
It fails because the exit limit becomes poison if n is zero and m is poison. This is problematic if e.g. the exit value of i is replaced with min(n, m).
If either n or m is constant, we can revive the analysis again. I added relevant tests and put alive2 links there.
If and is used instead, this is okay: https://alive2.llvm.org/ce/z/K9rbJk . Hence the existing analysis is sound.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93882
Reverted because the compile time impact is still too high.
isKnownViaNonRecursiveReasoning is used twice, we can do it just once.
Differential Revision: https://reviews.llvm.org/D92152
Previously we tried to using isKnownPredicateAt, but it makes an
extra query to isKnownPredicate, which has negative impact on compile
time. Let's try to use more lightweight isBasicBlockEntryGuardedByCond.
Differential Revision: https://reviews.llvm.org/D92152
A piece of code in `isLoopBackedgeGuardedByCond` basically duplicates
the dominators traversal from `isBlockEntryGuardedByCond` called from
`isKnownPredicateAt`, but it's less powerful because it does not give context
to `isImpliedCond`. This patch reuses the `isKnownPredicateAt `function there,
reducing the amount of code duplication and making it more powerful.
Differential Revision: https://reviews.llvm.org/D92152
Reviewed By: skatkov
Yang Fan