Add the `IsText` argument to `GetFile` and `GetFileOrSTDIN` which will help z/OS distinguish between text and binary correctly. This is an extension to [this patch](https://reviews.llvm.org/D97785)
Reviewed By: abhina.sreeskantharajan, amccarth
Differential Revision: https://reviews.llvm.org/D100488
Rewrites test to use correct architecture triple; fixes incorrect
reference in SourceLevelDebugging doc; simplifies `spillReg` behaviour
so as to not be dependent on changes elsewhere in the patch stack.
This reverts commit d2000b45d0.
:: (store 1 + 4, addrspace 1)
->
:: (store 1 into undef + 4, addrspace 1)
An offset without a base isn't terribly useful but it's convenient to update
the offset without checking the value. For example, when breaking apart
stores into smaller units
Differential Revision: https://reviews.llvm.org/D97812
This patch adds a new instruction that can represent variadic debug values,
DBG_VALUE_VAR. This patch alone covers the addition of the instruction and a set
of basic code changes in MachineInstr and a few adjacent areas, but does not
correctly handle variadic debug values outside of these areas, nor does it
generate them at any point.
The new instruction is similar to the existing DBG_VALUE instruction, with the
following differences: the operands are in a different order, any number of
values may be used in the instruction following the Variable and Expression
operands (these are referred to in code as “debug operands”) and are indexed
from 0 so that getDebugOperand(X) == getOperand(X+2), and the Expression in a
DBG_VALUE_VAR must use the DW_OP_LLVM_arg operator to pass arguments into the
expression.
The new DW_OP_LLVM_arg operator is only valid in expressions appearing in a
DBG_VALUE_VAR; it takes a single argument and pushes the debug operand at the
index given by the argument onto the Expression stack. For example the
sub-expression `DW_OP_LLVM_arg, 0` has the meaning “Push the debug operand at
index 0 onto the expression stack.”
Differential Revision: https://reviews.llvm.org/D82363
Memory operands store a base alignment that does not factor in
the effect of the offset on the alignment.
Previously the printing code only printed the base alignment if
it was different than the size. If there is an offset, the reader
would need to figure out the effective alignment themselves. This
has confused me before and someone else was recently confused on
IRC.
This patch prints the possibly offset adjusted alignment if it is
different than the size. And prints the base alignment if it is
different than the alignment. The MIR parser has been updated to
read basealign in addition to align.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D94344
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
Add a table recording "substitutions" between pairs of <instruction,
operand> numbers, from old pairs to new pairs. Post-isel optimizations are
able to record the outcome of an optimization in this way. For example, if
there were a divide instruction that generated the quotient and remainder,
and it were replaced by one that only generated the quotient:
$rax, $rcx = DIV-AND-REMAINDER $rdx, $rsi, debug-instr-num 1
DBG_INSTR_REF 1, 0
DBG_INSTR_REF 1, 1
Became:
$rax = DIV $rdx, $rsi, debug-instr-num 2
DBG_INSTR_REF 1, 0
DBG_INSTR_REF 1, 1
We could enter a substitution from <1, 0> to <2, 0>, and no substitution
for <1, 1> as it's no longer generated.
This approach means that if an instruction or value is deleted once we've
left SSA form, all variables that used the value implicitly become
"optimized out", something that isn't true of the current DBG_VALUE
approach.
Differential Revision: https://reviews.llvm.org/D85749
This patch defines the MIR format for debug instruction references: it's an
integer trailing an instruction, marked out by "debug-instr-number", much
like how "debug-location" identifies the DebugLoc metadata of an
instruction. The instruction number is stored directly in a MachineInstr.
Actually referring to an instruction comes in a later patch, but is done
using one of these instruction numbers.
I've added a round-trip test and two verifier checks: that we don't label
meta-instructions as generating values, and that there are no duplicates.
Differential Revision: https://reviews.llvm.org/D85746
This patch introduces the new .bb_addr_map section feature which allows us to emit the bits needed for mapping binary profiles to basic blocks into a separate section.
The format of the emitted data is represented as follows. It includes a header for every function:
| Address of the function | -> 8 bytes (pointer size)
| Number of basic blocks in this function (>0) | -> ULEB128
The header is followed by a BB record for every basic block. These records are ordered in the same order as MachineBasicBlocks are placed in the function. Each BB Info is structured as follows:
| Offset of the basic block relative to function begin | -> ULEB128
| Binary size of the basic block | -> ULEB128
| BB metadata | -> ULEB128 [ MBB.isReturn() OR MBB.hasTailCall() << 1 OR MBB.isEHPad() << 2 ]
The new feature will replace the existing "BB labels" functionality with -basic-block-sections=labels.
The .bb_addr_map section scrubs the specially-encoded BB symbols from the binary and makes it friendly to profilers and debuggers.
Furthermore, the new feature reduces the binary size overhead from 70% bloat to only 12%.
For more information and results please refer to the RFC: https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html
Reviewed By: MaskRay, snehasish
Differential Revision: https://reviews.llvm.org/D85408
Unwinders may only preserve the lower 64bits of Neon and SVE registers,
as only the registers in the base ABI are guaranteed to be preserved
over the exception edge. The caller will need to preserve additional
registers for when the call throws an exception and the unwinder has
tried to recover state.
For e.g.
svint32_t bar(svint32_t);
svint32_t foo(svint32_t x, bool *err) {
try { bar(x); } catch (...) { *err = true; }
return x;
}
`z0` needs to be spilled before the call to `bar(x)` and reloaded before
returning from foo, as the exception handler may have clobbered z0.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84737
It's possible to have a single virtual register def with a subreg
index that would pass the previous check, but it's not possible to
have a subregister def in SSA.
This is in preparation for adding stricter checks for SSA MIR.
Summary:
The BFloat IR type is introduced to provide support for, initially, the BFloat16
datatype introduced with the Armv8.6 architecture (optional from Armv8.2
onwards). It has an 8-bit exponent and a 7-bit mantissa and behaves like an IEEE
754 floating point IR type.
This is part of a patch series upstreaming Armv8.6 features. Subsequent patches
will upstream intrinsics support and C-lang support for BFloat.
Reviewers: SjoerdMeijer, rjmccall, rsmith, liutianle, RKSimon, craig.topper, jfb, LukeGeeson, sdesmalen, deadalnix, ctetreau
Subscribers: hiraditya, llvm-commits, danielkiss, arphaman, kristof.beyls, dexonsmith
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78190
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
in the same section.
This allows specifying BasicBlock clusters like the following example:
!foo
!!0 1 2
!!4
This places basic blocks 0, 1, and 2 in one section in this order, and
places basic block #4 in a single section of its own.
Otherwise, the Win64 unwinder considers direct branches to such empty
trailing BBs to be a branch out of the function. It treats such a branch
as a tail call, which can only be part of an epilogue. If the unwinder
misclassifies such a branch as part of the epilogue, it will fail to
unwind the stack further. This can lead to bad stack traces, or failure
to handle exceptions properly. This is described in
https://llvm.org/PR45064#c4, and by the comment at the top of the
X86AvoidTrailingCallPass.cpp file.
It should be safe to insert int3 for such blocks. An empty trailing BB
that reaches this pass is pretty much guaranteed to be unreachable. If
a program executed such a block, it would fall off the end of the
function.
Most of the complexity in this patch comes from threading through the
"EHFuncletEntry" boolean on the MIRParser and registering the pass so we
can stop and start codegen around it. I used an MIR test because we
should teach LLVM to optimize away these branches as a follow-up.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D76531
This is the second patch in a series of patches to enable basic block
sections support.
This patch adds support for:
* Creating direct jumps at the end of basic blocks that have fall
through instructions.
* New pass, bbsections-prepare, that analyzes placement of basic blocks
in sections.
* Actual placing of a basic block in a unique section with special
handling of exception handling blocks.
* Supports placing a subset of basic blocks in a unique section.
* Support for MIR serialization and deserialization with basic block
sections.
Parent patch : D68063
Differential Revision: https://reviews.llvm.org/D73674
This is needed for D74873, AMDGPU going to have 16 bit subregs
and the largest tuple is 32 VGPRs, which results in 64 lanes.
Differential Revision: https://reviews.llvm.org/D75378
This adds infrastructure to print and parse MIR MachineOperand comments.
The motivation for the ARM backend is to print condition code names instead of
magic constants that are difficult to read (for human beings). For example,
instead of this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14, $noreg
t2Bcc %bb.4, 0, killed $cpsr
we now print this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14 /* CC::always */, $noreg
t2Bcc %bb.4, 0 /* CC:eq */, killed $cpsr
This shows that MachineOperand comments are enclosed between /* and */. In this
example, the EOR instruction is not conditionally executed (i.e. it is "always
executed"), which is encoded by the 14 immediate machine operand. Thus, now
this machine operand has /* CC::always */ as a comment. The 0 on the next
conditional branch instruction represents the equal condition code, thus now
this operand has /* CC:eq */ as a comment.
As it is a comment, the MI lexer/parser completely ignores it. The benefit is
that this keeps the change in the lexer extremely minimal and no target
specific parsing needs to be done. The changes on the MIPrinter side are also
minimal, as there is only one target hooks that is used to create the machine
operand comments.
Differential Revision: https://reviews.llvm.org/D74306
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
We're planning to remove the shufflemask operand from ShuffleVectorInst
(D72467); fix GlobalISel so it doesn't depend on that Constant.
The change to prelegalizercombiner-shuffle-vector.mir happens because
the input contains a literal "-1" in the mask (so the parser/verifier
weren't really handling it properly). We now treat it as equivalent to
"undef" in all contexts.
Differential Revision: https://reviews.llvm.org/D72663
In D71841 we inverted the sense of the SDNode-level flag to ensure all nodes
default to potentially raising FP exceptions unless otherwise specified --
i.e. if we forget to propagate the flag somewhere, the effect is now only
lost performance, not incorrect code.
However, the related flag at the MI level still defaults to nodes not raising
FP exceptions unless otherwise specified. To be fully on the (conservatively)
safe side, we should invert that flag as well.
This patch does so by replacing MIFlag::FPExcept with MIFlag::NoFPExcept.
(Note that this does also introduce an incompatible change in the MIR format.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D72466
Jonathan Crowther