When building in Debug on Windows-MSVC after b7402edce3, a lot of tests were failing because we were dereferencing an element past the end of HashRecords. This happened towards the end of the table, in unused slots.
The patch adds checking for various potential issues in parsing name
lookup tables and reporting them as recoverable errors, similarly as we
do for other tables.
Differential Revision: https://reviews.llvm.org/D83050
The parsing method did not check reading errors and might easily fall
into an infinite loop on an invalid input because of that.
Differential Revision: https://reviews.llvm.org/D83049
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Differential revision: https://reviews.llvm.org/D70720
There are following issues with `CFIProgram::parse` code:
1) Invalid CFI opcodes were never tested. And currently a test would fail
when the `LLVM_ENABLE_ABI_BREAKING_CHECKS` is enabled. It happens because
the `DataExtractor::Cursor C` remains unchecked when the
"Invalid extended CFI opcode" error is reported:
```
.eh_frame section at offset 0x1128 address 0x0:
Program aborted due to an unhandled Error:
Error value was Success. (Note: Success values must still be checked prior to being destroyed).
```
2) It is impossible to reach the "Invalid primary CFI opcode" error with the current code.
There are 3 possible primary opcode values and all of them are handled. Hence this error
should be replaced with llvm_unreachable.
3) Errors currently reported are upper-case.
This patch refines the code in the `CFIProgram::parse` method to fix all issues mentioned
and adds unit tests for all possible invalid extended CFI opcodes.
Differential revision: https://reviews.llvm.org/D82868
Previously, the debug line parser would keep attempting to read data
even if it had run out of data to read. This meant errors in parsing
would often end up being reported as something else, such as an unknown
version or malformed directory/filename table. This patch fixes the
issues by using the Cursor API to capture errors.
Reviewed by: labath
Differential Revision: https://reviews.llvm.org/D83043
This reduces peak memory on my test case from 1960.14MB to 1700.63MB
(-260MB, -13.2%) with no measurable impact on CPU time. I'm currently
working with a publics stream that is about 277MB. Before this change,
we would allocate 277MB of heap memory, serialize publics into them,
hold onto that heap memory, open the PDB, and commit into it. After
this change, we defer the serialization until commit time.
In the last change I made to public writing, I re-sorted the list of
publics multiple times in place to avoid allocating new temporary data
structures. Deferring serialization until later requires that we don't
reorder the publics. Instead of sorting the publics, I partially
construct the hash table data structures, store a publics index in them,
and then sort the hash table data structures. Later, I replace the index
with the symbol record offset.
This change also addresses a FIXME and moves the list of global and
public records from GSIHashStreamBuilder to GSIStreamBuilder. Now that
publics aren't being serialized, it makes even less sense to store them
as a list of CVSymbol records. The hash table used to deduplicate
globals is moved as well, since that is specific to globals, and not
publics.
Reviewed By: aganea, hans
Differential Revision: https://reviews.llvm.org/D81296
Currently when the .eh_frame section is truncated so that
CFI instructions can't be read, it is possible to enter
an infinite loop.
It happens because `CFIProgram::parse` does not handle errors properly.
This patch fixes the issue.
Differential revision: https://reviews.llvm.org/D82017
Previously, if there was an error whilst parsing the operands of an
extended opcode, the operands would be treated as zero and printed. This
could potentially be slightly confusing. This patch changes the
behaviour to print the raw bytes instead.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D81570
Summary: Previous code would try to verify DW_AT_ranges and if any ranges would overlap, it would stop attributing any ranges after this to the DIE which caused incorrect errors to be reported that a DIE's address ranges were not contained in the parent DIE's ranges. Added a fix and a test.
Reviewers: aprantl, labath, probinson, JDevlieghere, jhenderson
Subscribers: hiraditya, MaskRay, cmtice, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79962
Current LLVM implementation uses `MCAsmInfo::CodePointerSize` as addr_size when emitting the DWARF data. llvm-dwarfdump, on the other hand, handles `addr_size`s of 4 and 8 properly and considers all other sizes as an error. This works for most of mainline targets except for MSP430 and AVR.
msp430-gcc v8.3.1 emits DWARF32 with addr_size = 4 (DWARF32 does not imply addr_size = 4, 32 refers to internal offset width of 4 bytes) that is handled by llvm-dwarfdump already. Still, emitting 2-byte target pointers on MSP430 seems correct as well (but not for MSP430X that is supported by msp430-gcc but not by LLVM and has 20-bit address space).
This patch make it possible for MSP430 debug info support to be tested with llvm-dwarfdump.
Differential Revision: https://reviews.llvm.org/D82055
This is a natural extension of the previous changes to use the Cursor
class independently in the standard and extended opcode paths, and in
turn allows delaying error handling until the entire line has been
printed in verbose mode, removing interleaved output in some cases.
Reviewed by: MaskRay, JDevlieghere
Differential Revision: https://reviews.llvm.org/D81562
Standard opcodes usually have ULEB128 arguments, so it is generally not
possible to recover from such errors. This patch causes the parser to
stop parsing the table in such situations.
Also don't emit the operands or add data to the table if there is an
error reading these opcodes.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D81470
Summary:
This makes the code easier to reason about, as it will behave the same
way regardless of whether there is any more data coming after the
presumed end of the prologue.
Reviewers: jhenderson, dblaikie, probinson, ikudrin
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77557
The verbose printing of unrecognised standard opcodes was broken in
multiple ways (additional blank lines, a closing parenthesis without
opening parenthesis and so on). This patch fixes it, and makes the
output more consistent with other opcodes.
The new line printing for debug line verbose output was inconsistent.
For new rows in the matrix, a blank line followed, whilst the
DW_LNS_copy opcode actually resulted in two blank lines. There was also
potential inconsistency in the blank lines at the end of the table. This
patch mostly resolves these issues - no blank lines appear in the output
except for a single line after the prologue and at table end to separate
it from any subsquent table, plus some instances after error messages.
Also add a unit test for verbose output to test the fine details of new
line placement and other aspects of verbose output.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D81102
Verbose and non-verbose parsing of .debug_line produced their output at
different points in the program. The most obvious impact of this was
that error messages were produced at different times, but it also
potentially reduced what clients could do by customising the stream or
warning/error handlers.
This change makes the two variants consistent by printing non-verbose
output inline, the same as verbose output.
Testing of the error messages has been modified to check the messages
always appear in the same location to illustrate the behaviour.
Reviewed by: JDevlieghere, dblaikie, MaskRay, labath
Differential Revision: https://reviews.llvm.org/D80989
The flushes previously existed to help ensure consistent error message
output when stdout and stderr were passed to the same location. This is
no longer necessary as errs() is now tied to outs().
Reviewed by: dblaikie, MaskRay, JDevlieghere, labath
Differential Revision: https://reviews.llvm.org/D80803
Previously, if an extended opcode was truncated, it would manifest as an
"unexpected line op length error" which wasn't quite accurate. This
change checks for errors any time data is read whilst parsing an
extended opcode, and reports any errors detected.
Reviewed by: MaskRay, labath, aprantl
Differential Revision: https://reviews.llvm.org/D80797
Like non-verbose output, so that it is easy to recognize the `Line,Column,File,ISA,Discriminator` column values.
Reviewed By: JDevlieghere, jhenderson
Differential Revision: https://reviews.llvm.org/D80874
Update for upstream comments. Improve test by writing all the debug
info by hand.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80168
This will ensure that nothing can ever start parsing data from a future
sequence and part-read data will be returned as 0 instead.
Reviewed by: aprantl, labath
Differential Revision: https://reviews.llvm.org/D80796
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
This patch extends the parsing and dumping support of llvm-dwarfdump
for debug_macro.dwo section.
Following forms are supported:
- DW_MACRO_define
- DW_MACRO_undef
- DW_MACRO_start_file
- DW_MACRO_end_file
- DW_MACRO_define_strx
- DW_MACRO_undef_strx
- DW_MACRO_define_strp
- DW_MACRO_undef_strp
Reviewed by: ikudrin, dblaikie
Differential Revision: https://reviews.llvm.org/D78500
A CIE with the Length == 0 is a terminator:
https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/ehframechpt.html
And GNU objdump recognizes them and prints the following for such entries:
"00000000 ZERO terminator"
This patch teaches llvm-objdump to do the same. I had to update tests to use
"CHECK-NEXT" too.
(Note: it looks perhaps not right that printing is done inside the DebugInfo library,
I'd expect to see the change in the llvm-objdump's code somewhere instead,
but that is how it done atm).
Differential revision: https://reviews.llvm.org/D80476
I've noticed an issue with "Data.getRelocatedValue(...)" call.
it might silently ignore an error when a content is truncated.
That leads to an infinite loop in the code (e.g. llvm-readobj hangs).
After fixing the issue I've found that actually we always tried
to read past the end of a section, even when a content was valid.
It happened because the terminator CIE (a CIE with the length == 0)
was never handled. At first I've tried just to stop adding the terminator
entry (and return), but it does not seem to be correct, because tools like
llvm-objdump might want to print something for such entries
(see comments in the code and test cases).
This patch fixes issues mentioned, provides new test cases for
both llvm-readobj and lib/DebugInfo and adds FIXMEs to existent
test cases related.
Differential revision: https://reviews.llvm.org/D80299
Demangling Itanium symbols either consumes the whole input or fails,
but Microsoft symbols can be successfully demangled with just some
of the input.
Add an outparam that enables clients to know how much of the input was
consumed, and use this flag to give llvm-undname an opt-in warning
on partially consumed symbols.
Differential Revision: https://reviews.llvm.org/D80173
The patch changes dumping of offsets in .debug_str_offsets sections so
that they are printed as 16-digit hex values if the contribution is in
the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of unit_length, debug_info_offset, and
debug_info_length fields in headers in .debug_pubname and
.debug_pubtypes sections so that they are printed as 16-digit hex values
if the contribution is in the DWARF64 format. Dumping of offsets in the
tables is changed in the same way.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of a unit_length field and offsets in headers
in .debug_loclists and .debug_rnglists sections so that they are printed
as 16-digit hex values if the contribution is in the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of unit_length and header_length fields in
headers in .debug_line sections so that they are printed as 16-digit hex
values if the contribution is in the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of the unit_length field in a unit header so
that it is printed as a 16-digit hex value if the unit is in the DWARF64
format.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of DWARF form values which sizes depend on
the DWARF format so that they are printed as 16-digit hex values for
DWARF64.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of unit_length and debug_info_offset fields in
an address range header so that they are printed as 16-digit hex values
if the contribution is in the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
Imagine we have a broken .eh_frame.
Below is a possible sample output of llvm-readelf:
```
...
entry 2 {
initial_location: 0x10f5
address: 0x2080
}
}
}
.eh_frame section at offset 0x2028 address 0x2028:
LLVM ERROR: Parsing entry instructions at 0 failed
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace.
Stack dump:
0. Program arguments: /home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf -a 1
#0 0x000055f4a2ff5a1a llvm::sys::PrintStackTrace(llvm::raw_ostream&) (/home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf+0x2b9a1a)
...
#15 0x00007fdae5dc209b __libc_start_main /build/glibc-B9XfQf/glibc-2.28/csu/../csu/libc-start.c:342:3
#16 0x000055f4a2db746a _start (/home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf+0x7b46a)
Aborted
```
I.e. it calls abort(), suggests to submit a bug report and exits with the code 134.
This patch changes the logic to propagate errors to callers.
This fixes the behavior for llvm-dwarfdump, llvm-readobj and other possible tools.
Differential revision: https://reviews.llvm.org/D79165
Summary: This implements searching for function symbols and public symbols by address.
More specifically,
-Implements NativeSession::findSymbolByAddress for function symbols and
public symbols. I think data symbols are also searched for, but isn't
implemented in this patch.
-Adds classes for NativeFunctionSymbol and NativePublicSymbol
-Adds a '-use-native-pdb-reader' option to llvm-symbolizer, for testing
purposes.
Reviewers: rnk, amccarth, labath
Subscribers: mgorny, hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79269
This patch adds support for dumping DW_MACRO_define_strx,
DW_MACRO_undef_strx in llvm-dwarfdump. These forms are currently
supported only in debug_macro section.
Reviewed By: ikudrin, dblaikie
Differential Revision: https://reviews.llvm.org/D78736
It looks like that was an initial intention, but some code paths in
`DWARFExpression::Operation::extract()` did not initialize `EndOffset`
properly.
Differential Revision: https://reviews.llvm.org/D79622
Reduces time to link PGO instrumented net_unittets.exe by 11% (9.766s ->
8.672s, best of three). Reduces peak memory by 65.7MB (2142.71MB ->
2076.95MB).
Use a more compact struct, BulkPublic, for faster sorting. Sort in
parallel. Construct the hash buckets in parallel. Try to use one vector
to hold all the publics instead of copying them from one to another.
Allocate all the memory needed to serialize publics up front, and then
serialize them in place in parallel.
Reviewed By: aganea, hans
Differential Revision: https://reviews.llvm.org/D79467
With a fix to uninitialized EndOffset.
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
Summary:
Current implementation of DWARFDie::getName(DINameKind Kind) could
lead to double call to DWARFDie::find(DW_AT_name) in following
scenario:
getName(LinkageName);
getName(ShortName);
getName(LinkageName) calls find(DW_AT_name) if linkage name is not
found. Then, it is called again in getName(ShortName). This patch
alows to request LinkageName and ShortName separately
to avoid extra call to find(DW_AT_name).
It helps D74169 to parse clang debuginfo faster(~1%).
Reviewers: clayborg, dblaikie
Differential Revision: https://reviews.llvm.org/D79173
The number of public symbols is very large, and each deserialization
does a few heap allocations. The public symbols are serialized by the
linker, so we can assume they have the expected layout and use it
directly.
Saves O(#publics) temporary heap allocations and shrinks some data
structures.
This accounts for a large portion of the memory allocations in LLD.
This DebugSubsectionRecordBuilder object can be stored directly in
C13Builders, it mostly wraps other subsections.
Remove the container kind field from the object. It is always the same
for all elements in the vector, and we can pass it in during writing.
Summary:
In D77860, we have changed `getSymbolFlags()` return type to `Expected<uint32_t>`.
This change helps bubble the error further up the stack.
Reviewers: jhenderson, grimar, JDevlieghere, MaskRay
Reviewed By: jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79075
Summary:
Change std::vector to SmallVector to prevent re-allocations and to
have small pre-allocated storage.
Reviewers: clayborg, dblaikie
Differential Revision: https://reviews.llvm.org/D79123
We unconditionally compared the DW_AT_ranges offset to the length of the
.debug_ranges section. For DWARF5 we should look at the debug_rnglists
section instead.
Differential revision: https://reviews.llvm.org/D78971
We were passing the AppleObjCSection instead of the AddrSection. Maybe
the API changed and this remained unnoticed because the types are the
same, or maybe it's just a typo.
The sizes of offsets in the `.debug_str_offsets.dwo` section depend on
the format of compilation or type units referencing them: 4 bytes for
DWARF32 units and 8 bytes for DWARF64 ones. The fix uses parsed units
to determine the actual size of offsets in the corresponding part of
the `.debug_str_offsets.dwo` section.
Differential Revision: https://reviews.llvm.org/D78555
Summary: AttrIndex could be removed from DWARFAbbreviationDeclaration::getAttributeValue.
Reviewers: clayborg, dblaikie
Differential Revision: https://reviews.llvm.org/D78672
The method is called from only one place and the call is already guarded
by a condition which checks that IsDWO is false.
Differential Revision: https://reviews.llvm.org/D78482
the tests pass on Linux.
Summary:
This change implements readFromExe, and calculating VA and RVA, which
are some of the functionalities that will be used for native PDB reading
for llvm symbolizer.
bug: https://bugs.llvm.org/show_bug.cgi?id=41795
Summary:
This change implements readFromExe, and calculating VA and RVA, which
are some of the functionalities that will be used for native PDB reading
for llvm symbolizer.
bug: https://bugs.llvm.org/show_bug.cgi?id=41795
Reviewers: hans, amccarth, rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78128
Summary:
Without this we could silently accept an invalid prologue because the
default DataExtractor behavior is to return an empty string when
reaching the end of file. And empty string is also used to terminate
these lists.
This makes the parsing code slightly more complicated, but this
complexity will go away once the parser starts working with truncating
data extractors. The reason I am doing it this way is because without
this, the truncation would regress the quality of error messages (right
now, we produce bad error messages only near EOF, but truncation would
make everything behave as if it was near EOF).
Reviewers: dblaikie, probinson, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77555
Summary:
If we have an (invalid) relocation which relocates bytes which partially
lie outside the range of the relocated section, the getRelocatedValue
would return confusing results. It would first read zero (because that's
what the underlying DataExtractor api does for out-of-bounds reads), and
then relocate that zero anyway.
A more appropriate behavior is to return zero straight away. This is
what this patch does.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78113
Originally committed as 416fa7720e
Reverted (due to buildbot failure - breaking lldb) in 7a45aeacf3.
I still can't seem to build lldb locally, but Pavel Labath has kindly
provided a potential fix to preserve the old behavior in lldb by
registering a simple recoverable error handler there that prints to the
desired stream in lldb, rather than stderr.
GCC emits this new form along with others forms(supported in llvm-dwardump)
and since it's support was missing in llvm-dwarfdump, it was not
able to correctly dump the content a debug_macro section for GCC
generated binaries.
This patch extends llvm-dwarfdump to support this form,
now GCC generated debug_macro section can be correctly dumped
using llvm-dwarfdump.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D78006
Summary:
Without that we could be silently reading zeroes, as that's the default
DataExtractor behavior. The entire parse would still most likely fail,
but it would do that with a seemingly unrelated/nonsensical error
message.
Reviewers: dblaikie, probinson, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77554
This probably isn't ideal - the error was being printed specifically
inline with the dumping that was more legible - but then the error
wasn't reported to stderr and didn't produce a non-zero exit code.
Probably the error message could be improved by adding more context now
that it isn't printed in-situ of the DIE dumping as much.
Makes it easier to test "this doesn't produce an error" (& indeed makes
that the implied default so we don't accidentally write tests that have
silent/sneaky errors as well as the positive behavior we're testing for)
Though the support for applying relocations is patchy enough that a
bunch of tests treat lack of relocation application as more of a warning
than an error - so rather than me trying to figure out how to add
support for a bunch of relocation types, let's degrade that to a warning
to match the usage (& indeed, it's sort of more of a tool warning anyway
- it's not that the DWARF is wrong, just that the tool can't fully cope
with it - and it's not like the tool won't dump the DWARF, it just won't
follow/render certain relocations - I guess in the most general case it
might try to render an unrelocated value & instead render something
bogus... but mostly seems to be about interesting relocations used in
eh_frame (& honestly it might be nice if we were lazier about doing this
relocation resolution anyway - if you're not dumping eh_frame, should we
really be erroring about the relocations in it?))
Summary:
Although the function had a bool return value, it was always returning
true. Presumably this is because the main type of errors one can
encounter here is running off the end of the stream, and until very
recently, the DataExtractor class made it very difficult to detect that.
The situation has changed now, and we can easily detect errors here,
which this patch does.
Reviewers: dblaikie, aprantl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77308
In DWARFv5, type units are stored in .debug_info sections, along with
compilation units, and they are distinguished by the unit_type field
in the header, not by the name of the section. It is impossible to
associate the correct index section of a DWP file with the unit before
the unit's header is read. This patch fixes reading DWARFv5 type units
by parsing the header first and then applying the index entry according
to the actual unit type.
Differential Revision: https://reviews.llvm.org/D77552
In package files, the base offset provided by index sections should be
used to find the contribution of a unit. The patch adds that base
offset when reading range list tables.
Differential revision: https://reviews.llvm.org/D77401
This fixes the reading of location lists headers for compilation units
in package files by adjusting the reading offset according to the
corresponding record in the unit index. This is required for
DW_FORM_loclistx to work.
Differential revision: https://reviews.llvm.org/D77146
Without the patch, all version 5 compile units in a DWP file read
location tables from the beginning of a .debug_loclists.dwo section.
The patch fixes that by adjusting the reading offset the same way as
for pre-v5 units. The section identifier to find the contribution
entry corresponds to the version of the unit.
Differential revision: https://reviews.llvm.org/D77145
DWARFv5 defines index sections in package files in a slightly different
way than the pre-standard GNU proposal, see Section 7.3.5 in the DWARF
standard and https://gcc.gnu.org/wiki/DebugFissionDWP for GNU proposal.
The main concern here is values for section identifiers, which are
partially overlapped with changed meanings. The patch adds support for
v5 index sections and resolves that difficulty by defining a set of
identifiers for internal use which can represent and distinct values
of both standards.
Differential Revision: https://reviews.llvm.org/D75929
This is a preparation for an upcoming patch which adds support for
DWARFv5 unit index sections. The patch adds tag "_EXT_" to identifiers
which reference sections that are deprecated in the DWARFv5 standard.
See D75929 for the discussion.
Differential Revision: https://reviews.llvm.org/D77141
The old name was a bit misleading because the functions actually return
contributions to the corresponding sections.
Differential revision: https://reviews.llvm.org/D77302
Summary:
This patch adds parsing and dumping DWARFv5 .debug_macro section in llvm-dwarfdump,
it does not introduce any new switch. Existing switch "--debug-macro"
should be used to dump macinfo or macro section.
Reviewed By: dblaikie, ikudrin, jhenderson
Differential Revision: https://reviews.llvm.org/D73086
Summary:
The directory_count and file_name_count fields are (section 6.2.4 of
DWARF5 spec) supposed to be uleb128s, not bytes. This bug meant that it
was not possible to correctly parse headers with more than 128 files or
directories.
I've found this bug by code inspection, though the limit is so small
someone would have run into it for real sooner or later. I've verified
that the producer side handles many files correctly, and that we are
able to parse such files after this fix.
Reviewers: dblaikie, jhenderson
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76498
Summary:
1. FileLineInfoSpecifier::Default isn't the default for anything.
Rename to RawValue, which accurately reflects its role.
2. Most functions that take a part of a FileLineInfoSpecifier end up
constructing a full one later or plumb two values through. Make them
all just take a complete FileLineInfoSpecifier.
3. Printing basenames only was handled differently from all other
variants, make it parallel to all the other variants.
Reviewers: jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76394
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Currently, this only works for object files, not executables or shared
libraries.
Differential revision: https://reviews.llvm.org/D70720
Summary:
This is a preparatory change for allowing LLVM to emit DW_OP_convert
operations converting to the generic type.
If DW_OP_convert's operand is 0, it converts the top of stack to the
generic type, as specified by DWARFv5 section 2.5.1.6:
"[...] takes one operand, which is an unsigned LEB128 integer that
represents the offset of a debugging information entry in the current
compilation unit, or value 0 which represents the generic type."
This adds support for such operations to llvm-dwarfdump.
Reviewers: aprantl, markus, jdoerfert, jhenderson
Reviewed By: aprantl
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D76141
When emitting PDBs, the TypeStreamMerger class is used to merge .debug$T records from the input .OBJ files into the output .PDB stream.
Records in .OBJs are not required to be aligned on 4-bytes, and "The Netwide Assembler 2.14" generates non-aligned records.
When compiling with -DLLVM_ENABLE_ASSERTIONS=ON, an assert was triggered in MergingTypeTableBuilder when non-ghash merging was used.
With ghash merging there was no assert.
As a result, LLD could potentially generate a non-aligned TPI stream.
We now align records on 4-bytes when record indices are remapped, in TypeStreamMerger::remapIndices().
Differential Revision: https://reviews.llvm.org/D75081
If the minimum_instruction_length of a debug line program is 0, no
address advancing via special opcodes, DW_LNS_const_add_pc, and
DW_LNS_advance_pc can occur, since the minimum_instruction_length is
used in a multiplication. This patch adds a warning reporting when this
issue occurs.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D75189
The line_range value of a debug line program header is used in divisions
related to special opcodes and DW_LNS_const_add_pc opcodes. As such, a
value of 0 cannot be used. This change introduces a new warning, if such
a situation is identified, and does not perform the relevant
calculations.
Reviewed by: probinson, aprantl
Differential Revision: https://reviews.llvm.org/D43470
This patch adds a check which reports an unsupported value of the
maximum_operations_per_instruction field in a debug line table header.
This is reported once per line table, at most, and only if the tablet
would otherwise need to use it (i.e. never for tables with version 3 or
less, or for tables which don't use DW_LNS_const_add_pc or special
opcodes). Unsupported values are currently any apart from 1.
Reviewed by: probinson, MaskRay
Differential Revision: https://reviews.llvm.org/D74819
This is a follow-up for D75609. As @dblaikie suggested, it prints
the actual number for an unknown section identifier when dumping
unit index sections.
Differential Revision: https://reviews.llvm.org/D75668
This fixes printing long values that might reside in CIE and FDE,
including offsets, lengths, and addresses.
Differential Revision: https://reviews.llvm.org/D73887
The condition was not accurate enough and could interpret some FDEs in
.eh_frame or 64-bit DWARF .debug_frame sections as CIEs. Even though
such FDEs are unlikely in a normal situation, the wrong interpretation
could hide an issue in a buggy generator.
Differential Revision: https://reviews.llvm.org/D73886
A DWARFSectionKind is read from input. It is not validated on parsing,
so an unexpected value may result in reaching llvm_unreachable() in
DWARFUnitIndex::getColumnHeader() when dumping the index section.
Differential Revision: https://reviews.llvm.org/D75609
YAML files were not being run during lit testing as there was no lit.local.cfg file. Once this was fixed, some buildbots would fail due to a StringRef that pointed to a std::string inside of a temporary llvm::Triple object. These issues are fixed here by making a local triple object that stays around long enough so the StringRef points to valid data. Fixed memory sanitizer bot bugs as well.
Differential Revision: https://reviews.llvm.org/D75390
Summary:
getInitialLength is a *DWARF*DataExtractor method so I had to "upgrade"
some DataExtractors to be able to make use of it.
Reviewers: ikudrin, jhenderson, probinson
Subscribers: aprantl, hiraditya, llvm-commits, dblaikie
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75535
YAML files were not being run during lit testing as there was no lit.local.cfg file. Once this was fixed, some buildbots would fail due to a StringRef that pointed to a std::string inside of a temporary llvm::Triple object. These issues are fixed here by making a local triple object that stays around long enough so the StringRef points to valid data. Also fixed an issue where strings for files in the file table could be added in opposite order due to parameters to function calls not having a strong ordering, which caused tests to fail. Added new arch specfic directories so when targets are not enabled, we continue to function just fine.
Differential Revision: https://reviews.llvm.org/D75390
YAML files were not being run during lit testing as there was no lit.local.cfg file. Once this was fixed, some buildbots would fail due to a StringRef that pointed to a std::string inside of a temporary llvm::Triple object. These issues are fixed here by making a local triple object that stays around long enough so the StringRef points to valid data. Also fixed an issue where strings for files in the file table could be added in opposite order due to parameters to function calls not having a strong ordering, which caused tests to fail.
Differential Revision: https://reviews.llvm.org/D75390
Summary:
In this patch I've done a slightly bigger rewrite to also remove the
hardcoded header lengths.
Reviewers: jhenderson, dblaikie, ikudrin
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75119
Summary:
This could be considered obvious, but I am putting it up to illustrate
the usefulness/impact of the getInitialLength change.
Reviewers: dblaikie, jhenderson, ikudrin
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75117
Oliver Stannard