This patch improves https://reviews.llvm.org/D76971 (Deduce attributes for aligned_alloc in InstCombine) and implements "TODO" item mentioned in the review of that patch.
> The function aligned_alloc() is the same as memalign(), except for the added restriction that size should be a multiple of alignment.
Currently, we simply bail out if we see a non-constant size - change that.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D100785
D24453 enabled libcalls simplication for ARM PCS. This may cause
caller/callee calling conventions mismatch in some situations such as
LTO. This patch makes instcombine aware that the compatible calling
conventions differences are benign (not emitting undef idom).
Differential Revision: https://reviews.llvm.org/D99773
As suggested in the review thread for 5094e12 and seen in the
motivating example from https://llvm.org/PR49885, it's not
clear if we have a way to create the optimal code without
this heuristic.
Follow up to a6d2a8d6f5. This covers all the public interfaces of the bundle related code. I tried to cleanup the internals where the changes were obvious, but there's definitely more room for improvement.
Add the subclass, update a few places which check for the intrinsic to use idiomatic dyn_cast, and update the public interface of AssumptionCache to use the new class. A follow up change will do the same for the newer assumption query/bundle mechanisms.
This is discussed in https://llvm.org/PR48999 ,
but it does not solve that request.
The difference in the vector test shows that some
other logic transform is limited to scalar types.
This is another step towards parity between existing select
transforms and min/max intrinsics (D98152)..
The existing 'not' folds around select are complicated, so
it's likely that we will need to enhance this, but this
should be a safe step.
This is a partial translation of the existing select-based
folds. We need to recreate several different transforms to
avoid regressions as noted in D98152.
https://alive2.llvm.org/ce/z/teuZ_J
For logical or/and reductions we emit regular intrinsics @llvm.vector.reduce.or/and.vxi1 calls.
These intrinsics are not effective for the logical or/and reductions,
especially if the optimizer is able to emit short circuit versions of
the scalar or/and instructions and vector code gets less effective than
the scalar version.
Instead, or reduction for i1 can be represented as:
```
%val = bitcast <ReduxWidth x i1> to iReduxWidth
%res = cmp ne iReduxWidth %val, 0
```
and reduction for i1 can be represented as:
```
%val = bitcast <ReduxWidth x i1> to iReduxWidth
%res = cmp eq iReduxWidth %val, 11111
```
This improves perfromance of the vector code significantly and make it
to outperform short circuit scalar code.
Part of D57059.
Differential Revision: https://reviews.llvm.org/D97406
statepoint intrinsic can be used in invoke context,
so it should be handled in visitCallBase to cover both call and invoke.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D97833
We can always look through single-argument (LCSSA) phi nodes when
performing alias analysis. getUnderlyingObject() already does this,
but stripPointerCastsAndInvariantGroups() does not. We still look
through these phi nodes with the usual aliasPhi() logic, but
sometimes get sub-optimal results due to the restrictions on value
equivalence when looking through arbitrary phi nodes. I think it's
generally beneficial to keep the underlying object logic and the
pointer cast stripping logic in sync, insofar as it is possible.
With this patch we get marginally better results:
aa.NumMayAlias | 5010069 | 5009861
aa.NumMustAlias | 347518 | 347674
aa.NumNoAlias | 27201336 | 27201528
...
licm.NumPromoted | 1293 | 1296
I've renamed the relevant strip method to stripPointerCastsForAliasAnalysis(),
as we're past the point where we can explicitly spell out everything
that's getting stripped.
Differential Revision: https://reviews.llvm.org/D96668
Instcombine will convert the nonnull and alignment assumption that use the boolean condtion
to an assumption that uses the operand bundles when knowledge retention is enabled.
Differential Revision: https://reviews.llvm.org/D82703
Instcombine will convert the nonnull and alignment assumption that use the boolean condtion
to an assumption that uses the operand bundles when knowledge retention is enabled.
Differential Revision: https://reviews.llvm.org/D82703
The constant trunc/ext may not be the optimal pre-condition,
but I think that handles the common cases.
Example of Alive2 proof:
https://alive2.llvm.org/ce/z/sREeLC
This is another step towards canonicalizing to the intrinsics.
Narrowing was identified as source of potential regression for
abs(), so we need to handle this for min/max - see:
https://llvm.org/PR48816
If this is not enough, we could process intrinsics in
the trunc-driven matching in canEvaluateTruncated().
We can sink extends after min/max if they match and would
not change the sign-interpreted compare. The only combo
that doesn't work is zext+smin/smax because the zexts
could change a negative number into positive:
https://alive2.llvm.org/ce/z/D6sz6J
Sext+umax/umin works:
define i32 @src(i8 %x, i8 %y) {
%0:
%sx = sext i8 %x to i32
%sy = sext i8 %y to i32
%m = umax i32 %sx, %sy
ret i32 %m
}
=>
define i32 @tgt(i8 %x, i8 %y) {
%0:
%m = umax i8 %x, %y
%r = sext i8 %m to i32
ret i32 %r
}
Transformation seems to be correct!
In the motivating cases from https://llvm.org/PR48816 ,
we have a trailing trunc. But that is not required to
reduce the abs width:
https://alive2.llvm.org/ce/z/ECaz-p
...as long as we clear the int-min-is-poison bit (nsw).
We have some existing tests that are affected, and I'm
not sure what the overall implications are, but in general
we favor narrowing operations over preserving nsw/nuw.
If that causes problems, we could restrict this transform
based on type (shouldChangeType() and/or vector vs. scalar).
Differential Revision: https://reviews.llvm.org/D95235
As mentioned in D93793, there are quite a few places where unary `IRBuilder::CreateShuffleVector(X, Mask)` can be used
instead of `IRBuilder::CreateShuffleVector(X, Undef, Mask)`.
Let's update them.
Actually, it would have been more natural if the patches were made in this order:
(1) let them use unary CreateShuffleVector first
(2) update IRBuilder::CreateShuffleVector to use poison as a placeholder value (D93793)
The order is swapped, but in terms of correctness it is still fine.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D93923
This commit adds two new intrinsics.
- llvm.experimental.vector.insert: used to insert a vector into another
vector starting at a given index.
- llvm.experimental.vector.extract: used to extract a subvector from a
larger vector starting from a given index.
The codegen work for these intrinsics has already been completed; this
commit is simply exposing the existing ISD nodes to LLVM IR.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D91362
The following constraints hold for swifterror values:
A swifterror value (either the parameter or the alloca) can only
be loaded and stored from, or used as a swifterror argument.
This patch updates instcombine to not try to convert a bitcast of a
function into a bitcast of a swifterror argument.
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D90258
This reverts commit 25a97c3a43.
We have other constant folds that fold undef funnel shift amounts to 0 - so we need to be consistent.
If we end up with regressions where we lose a splat shift amount pattern we'll have to investigate other canonicalizations, but matchFunnelShift currently protects us from that.
By always performing a modulo on the shift amount constants this was causing undef amounts being replaced with zero, meaning we were losing funnel shift by splat (with undef) patterns.
Tweaked the shift amount bounds check to support (passthrough) undefs, and use Constant::mergeUndefsWith to preserve the undefs after folding.
I think we initially made this fold conservative to be safer, but we do not
need the alignment attribute/metadata limitation because the masked load
intrinsic itself specifies the alignment. A normal vector load is better for
IR transforms and should be no worse in codegen than the masked alternative.
If it is worse for some target, the backend can reverse this transform.
Differential Revision: https://reviews.llvm.org/D88505
NOTE: There is a mailing list discussion on this: http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
Complemantary to the assumption outliner prototype in D71692, this patch
shows how we could simplify the code emitted for an alignemnt
assumption. The generated code is smaller, less fragile, and it makes it
easier to recognize the additional use as a "assumption use".
As mentioned in D71692 and on the mailing list, we could adopt this
scheme, and similar schemes for other patterns, without adopting the
assumption outlining.
Bail from maskIsAllZeroOrUndef and maskIsAllOneOrUndef prior to iterating over the number of
elements for scalable vectors.
Assert that the mask type is not scalable in possiblyDemandedEltsInMask .
Assert that the types are correct in all three functions.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87424
If we know that the abs operand is known negative, we can replace
it with a neg.
To avoid computing known bits twice, I've removed the fold for the
non-negative case from InstSimplify. Both the non-negative and the
negative case are handled by InstCombine now, with one known bits call.
Differential Revision: https://reviews.llvm.org/D87196
Similar to D87168, but for abs. If we have a dominating x >= 0
condition, then we know that abs(x) is x. This fold is in
InstCombine, because we need to create a sub instruction for
the x < 0 case.
Differential Revision: https://reviews.llvm.org/D87184
Similar to the existing transform - peek through a select
to match a value and its negation.
https://alive2.llvm.org/ce/z/MXi5KG
define i8 @src(i1 %b, i8 %x) {
%0:
%neg = sub i8 0, %x
%sel = select i1 %b, i8 %x, i8 %neg
%abs = abs i8 %sel, 1
ret i8 %abs
}
=>
define i8 @tgt(i1 %b, i8 %x) {
%0:
%abs = abs i8 %x, 1
ret i8 %abs
}
Transformation seems to be correct!
If some of gc live value are not used in gc.relocate we can remove them
from gc-live bundle of statepoint instruction.
Also the CL removes duplicated Values in gc-live bundle.
Reviewers: reames, dantrushin
Reviewed By: dantrushin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D85959
The only def for gc.relocate is a gc.statepoint. But real dependency is not
described by def-use chain. Instead this dependency is encoded by indecies
of operands in gc-live bundle of statepoint as integer constants in gc.relocate.
InstCombine operates by def-use chain. As a result when value in gc-live bundle
is simplified the gc.statepoint itself is not simplified but it might simplify dependent
gc.relocates. To trigger the optimization of gc.relocate we now unconditionally trigger
check of all dependent gc.relocates by adding them to worklist.
This CL handles of gc.relocates as process of gc.statepoint optimization considering
gc.statepoint and related gc.relocate as whole entity.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D85954
InstCombine adds users of transformed instruction to working list to
process on the same iteration. However gc.relocate may have a hidden
user (next gc.relocate) which is connected through gc.statepoint intrinsic and
there is no direct def-use chain between them.
In this case if the next gc.relocation is already processed it will not be added
to worklist and will not be able to be processed on the same iteration.
Let's we have the following case:
A = gc.relocate(null)
B = statepoint(A)
C = gc.relocate(B, hidden(A))
If C is already considered then after replacement of A with null, statepoint B
instruction will be added to the queue but not C.
C can be processed only on the next iteration.
If the chain of relocation is pretty long the many iteration may be required.
This change is to reduce the number of iteration to meet the latest changes
related to reducing infinite loop threshold.
This is a quick (not best) fix. In the follow up patches I plan to move gc relocation
handling into statepoint handler. This should also help to remove unused gc live
entries in statepoint bundle.
Reviewers: reames, dantrushin
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D75598
Negating the input doesn't matter. I left a FIXME to copy the nsw flag if its present on the neg but not on the abs.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D85055
For a long time, the InstCombine pass handled target specific
intrinsics. Having target specific code in general passes was noted as
an area for improvement for a long time.
D81728 moves most target specific code out of the InstCombine pass.
Applying the target specific combinations in an extra pass would
probably result in inferior optimizations compared to the current
fixed-point iteration, therefore the InstCombine pass resorts to newly
introduced functions in the TargetTransformInfo when it encounters
unknown intrinsics.
The patch should not have any effect on generated code (under the
assumption that code never uses intrinsics from a foreign target).
This introduces three new functions:
TargetTransformInfo::instCombineIntrinsic
TargetTransformInfo::simplifyDemandedUseBitsIntrinsic
TargetTransformInfo::simplifyDemandedVectorEltsIntrinsic
A few target specific parts are left in the InstCombine folder, where
it makes sense to share code. The largest left-over part in
InstCombineCalls.cpp is the code shared between arm and aarch64.
This allows to move about 3000 lines out from InstCombine to the targets.
Differential Revision: https://reviews.llvm.org/D81728
Dávid Bolvanský