-Make sure of the CreateShl/LShr/AShr methods that take a uint64_t
instead of creating a ConstantInt for 1 ourselves.
-Use Builder.getInt1 or ConstantInt::getBool instead of a conditional.
-Pull out repeated calls to getType.
While `%x.curr` is always safe to compute, because `LoopBackedgeTakenCount`
will always be smaller than `bitwidth(X)`, i.e. we never get poison,
rewriting `%x.next` is more complicated, however, because `X << LoopTripCount`
will be poison iff `LoopTripCount == bitwidth(X)` (which will happen
iff `BitPos` is `bitwidth(x) - 1` and `X` is `1`).
So unless we know that isn't the case (as alive2 notes, we know it's safe
to do iff shift had no-wrap flags, or bitpos does not indicate signbit,
or we know that %x is never `1`), we'll need to emit an alternative,
safe IR, by either just shifting the `%x.curr`, or conditionally selecting
between the computed `%x.next` and `0`..
Former IR looks better so let's do that.
While there, ensure that we don't drop no-wrap flags from said shift.
The current state of the transform is still not enough to support
my motivational pattern, because it has one more "induction variable".
I have delayed posting this patch, because originally even just rewriting
the loop as countable wasn't enough to nicely transform my motivational pattern,
because i expected that extra IV to be rewritten afterwards,
but it wasn't happening until i fixed that in D91800.
So, this patch allows the 'left-shift until bittest' loop idiom
as long as the inserted ops are cheap,
and lifts any and all extra use checks on the instructions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D92754
If the bitmask is for sign bit, instcombine would have canonicalized
the pattern into a proper sign bit check. Supporting that is still
simple, but requires a bit of a roundtrip - we first have to use
`decomposeBitTestICmp()`, and the rest again just works.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D91726
The handing of the case where the mask is a constant is trivial,
if said constant is a power of two, the bit in question is log2(mask),
rest just works.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D91725
The motivation here is the following inner loop in fp16/fp24 -> fp32 expander,
that runs as part of the floating-point DNG decompression in RawSpeed library:
cd380bb9a2/src/librawspeed/decompressors/DeflateDecompressor.cpp (L112-L115)
```
while (!(fp32_fraction & (1 << 23))) {
fp32_exponent -= 1;
fp32_fraction <<= 1;
}
```
(https://godbolt.org/z/r13YMh)
As one might notice, that loop is currently uncountable, and that whole code stays scalar.
Yet, it is rather trivial to make that loop countable:
https://godbolt.org/z/do8WMz
and we can prove that via alive2:
https://alive2.llvm.org/ce/z/7vQnji (ha nice, isn't it?)
... and that allow for the whole fp16->fp32 code to vectorize:
https://godbolt.org/z/7hYr13
Now, while i'd love to get there, i feel like i should take it in steps.
For now, this introduces support for the most basic case,
where the bit position is known as a variable,
and the loop *will* go away (has no live-outs other than the recurrence,
no extra instructions in the loop).
I have added sufficient (i believe) test coverage,
and alive2 is happy with those transforms.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D91038
This adds support for loops like
unsigned clz(unsigned x) {
unsigned w = sizeof (x) * CHAR_BIT;
while (x) {
w--;
x >>= 1;
}
return w;
}
and
unsigned clz(unsigned x) {
unsigned w = sizeof (x) * CHAR_BIT - 1;
while (x >>= 1) {
w--;
}
return w;
}
To support these we look for add x, -1 as well as add x, 1 that
we already matched. If the value was -1 we need to subtract from
the initial counter value instead of adding to it.
Fixes PR48404.
Differential Revision: https://reviews.llvm.org/D92745
The CountPrev variable was only used to forward a value from
the if statement to the conditional operator under the same
condition.
While there move some variable declarations to their first
assignment.
Currently, we have some confusion in the codebase regarding the
meaning of LocationSize::unknown(): Some parts (including most of
BasicAA) assume that LocationSize::unknown() only allows accesses
after the base pointer. Some parts (various callers of AA) assume
that LocationSize::unknown() allows accesses both before and after
the base pointer (but within the underlying object).
This patch splits up LocationSize::unknown() into
LocationSize::afterPointer() and LocationSize::beforeOrAfterPointer()
to make this completely unambiguous. I tried my best to determine
which one is appropriate for all the existing uses.
The test changes in cs-cs.ll in particular illustrate a previously
clearly incorrect AA result: We were effectively assuming that
argmemonly functions were only allowed to access their arguments
after the passed pointer, but not before it. I'm pretty sure that
this was not intentional, and it's certainly not specified by
LangRef that way.
Differential Revision: https://reviews.llvm.org/D91649
Use isKnownXY comparators when one of the operands can be with
scalable vectors or getFixedSize() for all the other cases.
This patch also does bug fixes for getPrimitiveSizeInBits by using
getFixedSize() near the places with the TypeSize comparison.
Differential Revision: https://reviews.llvm.org/D89703
The function LoopIdiomRecognize::isLegalStore looks for stores in loops
that could be transformed into memset or memcpy. However, the algorithm
currently requires that we know how big the store is at runtime, i.e.
that the store size will not overflow an unsigned integer. For scalable
vectors we cannot guarantee this so I have changed the code to bail out
for now. In addition, even if we add a way to query the maximum value of
vscale in future we will still need to update the algorithm to cope with
non-constant strides. The additional cost associated with calculating
the memset and memcpy arguments will need to be taken into account as
well.
This patch also fixes up an implicit TypeSize -> uint64_t cast,
thereby removing a warning. I've added tests here showing a fixed
width vector loop being transformed into memcpy, and a scalable
vector loop remaining unchanged:
Transforms/LoopIdiom/memcpy-vectors.ll
Differential Revision: https://reviews.llvm.org/D87439
Loop Idiom Recognize Pass (LIRP) attempts to transform loops with subscripted arrays
into memcpy/memset function calls. In some particular situation, this transformation
introduces negative impacts. For example: https://bugs.llvm.org/show_bug.cgi?id=47300
This patch will enable users to disable a particular part of the transformation, while
he/she can still enjoy the benefit brought about by the rest of LIRP. The default
behavior stays unchanged: no part of LIRP is disabled by default.
Reviewed By: etiotto (Ettore Tiotto)
Differential Revision: https://reviews.llvm.org/D86262
Recommit the patch after fixing an issue reported caused by the fact
that re-used values are also added to InsertedValues.
Additional tests have been added in 88818491b9
This reverts the revert commit 38884641f2.
SCEVExpander already tracks which instructions have been inserted n
InsertedValues/InsertedPostIncValues. This patch adds an additional
vector to collect the instructions in insertion order. This can then be
used to remove exactly the instructions inserted by the expander.
This replaces ExpandedValuesCleaner, which in some cases might remove
values not inserted by the expander (e.g. if a value was dead before
insertion and is then used during expansion).
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D84327
Summary:
Get back `const` partially lost in one of recent changes.
Additionally specify explicit qualifiers in few places.
Reviewers: samparker
Reviewed By: samparker
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82383
Recommitting most of the remaining changes from
259eb619ff, but excluding the call to
getUserCost from getInstructionThroughput. Though there's still no
test changes, I doubt that this is an NFC...
With the two getIntrinsicInstrCosts folded into one, now fold in the
scalar/code-size orientated getIntrinsicCost. The remaining scalar
intrinsics were memcpy, cttz and ctlz which now have special handling
in the BasicTTI implementation.
This had required a change in the AMDGPU backend for fabs as it
should always be 'free'. I've also changed the X86 backend to return
the BaseT implementation when the CostKind isn't RecipThroughput.
Differential Revision: https://reviews.llvm.org/D80012
With the two getIntrinsicInstrCosts folded into one, now fold in the
scalar/code-size orientated getIntrinsicCost. This involved sinking
cost of the TTIImpl into the base implementation, as it performs no
target checks. The opcodes remaining were memcpy, cttz and ctlz which
now have special handling in the BasicTTI implementation.
getInstructionThroughput can now directly return the result of
getUserCost.
This had required a change in the AMDGPU backend for fabs and its
always 'free'. I've also changed the X86 backend to return '1' for
any intrinsic when the CostKind isn't RecipThroughput.
Though this intended to be a non-functional change, there are many
paths being combined here so I would be very surprised if this didn't
have an effect.
Differential Revision: https://reviews.llvm.org/D80012
SCEVExpander modifies the underlying function so it is more suitable in
Transforms/Utils, rather than Analysis. This allows using other
transform utils in SCEVExpander.
This patch was originally committed as b8a3c34eee, but broke the
modules build, as LoopAccessAnalysis was using the Expander.
The code-gen part of LAA was moved to lib/Transforms recently, so this
patch can be landed again.
Reviewers: sanjoy.google, efriedma, reames
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D71537
Some includes are not required and forward declarations can be used
instead. This also exposed a few places that were not directly including
required files.
Summary:
Passes ORE, BPI, BFI are not being preserved by Loop passes, hence it
is incorrect to retrieve these passes as cached.
This patch makes the loop passes in question compute a new instance.
In some of these cases, however, it may be beneficial to change the Loop pass to
a Function pass instead, similar to the change for LoopUnrollAndJam.
Reviewers: chandlerc, dmgreen, jdoerfert, reames
Subscribers: mehdi_amini, hiraditya, zzheng, steven_wu, dexonsmith, Whitney, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72891
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, nicolasvasilache
Subscribers: hiraditya, jfb, mehdi_amini, rriddle, jpienaar, burmako, shauheen, antiagainst, csigg, arpith-jacob, mgester, lucyrfox, herhut, liufengdb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73041
SCEVExpander modifies the underlying function so it is more suitable in
Transforms/Utils, rather than Analysis. This allows using other
transform utils in SCEVExpander.
Reviewers: sanjoy.google, efriedma, reames
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D71537
Summary:
This is a resubmit of D71473.
This patch introduces a set of functions to enable deprecation of IRBuilder functions without breaking out of tree clients.
Functions will be deprecated one by one and as in tree code is cleaned up.
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: aaron.ballman, courbet
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71547
Summary:
This patch introduces a set of functions to enable deprecation of IRBuilder functions without breaking out of tree clients.
Functions will be deprecated one by one and as in tree code is cleaned up.
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71473
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
Roman Lebedev