This implements an LLVM tool that's flag- and output-compatible
with macOS's `otool` -- except for bugs, but from testing with both
`otool` and `xcrun otool-classic`, llvm-otool matches vanilla
otool's behavior very well already. It's not 100% perfect, but
it's a very solid start.
This uses the same approach as llvm-objcopy: llvm-objdump uses
a different OptTable when it's invoked as llvm-otool. This
is possible thanks to D100433.
Differential Revision: https://reviews.llvm.org/D100583
This is similar to D83530, but for llvm-objdump.
The motivation is the desire to add an `llvm-otool` symlink to
llvm-objdump that behaves like macOS's `otool`, using the same
technique the at llvm-objcopy uses to behave like `strip` (etc).
This change for the most part preserves behavior. In some cases,
it increases compatibility with GNU objdump a bit. For example,
the long options now require two dashes, and the long options
taking arguments for the most part now require a `=` in front
of the value. Exceptions are flags where tests passed the
value separately, for these the separate form is kept as
an alias to the = form.
The one-letter short form args are now joined or separate
and long longer accept a =, which also matches GNU objdump.
cl::opt<>s in libraries now have to be explicitly plumbed
through. This patch does that for --x86-asm-syntax=, but
there's hope that we can remove that again.
Differential Revision: https://reviews.llvm.org/D100433
Clang spends a decent amount of time in the LineOffsetMapping::get(...)
function. This function used to be vectorized (through SSE2) then the
optimization got dropped because the sequential version was on-par performance
wise.
This provides an optimization of the sequential version that works on a word at
a time, using (documented) bithacks to provide a portable vectorization.
When preprocessing the sqlite amalgamation, this yields a sweet 3% speedup.
Differential Revision: https://reviews.llvm.org/D99409
The option `--prefix-strip` is only used when `--prefix` is not empty.
It removes N initial directories from absolute paths before adding the
prefix.
This matches GNU's objdump behavior.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D96679
llvm-objdump only uses one MCInstrAnalysis object, so if ARM and Thumb
code is mixed in one object, or if an object is disassembled without
explicitly setting the triple to match the ISA used, then branch and
call targets will be printed incorrectly.
This could be fixed by creating two MCInstrAnalysis objects in
llvm-objdump, like we currently do for SubtargetInfo. However, I don't
think there's any reason we need two separate sub-classes of
MCInstrAnalysis, so instead these can be merged into one, and the ISA
determined by checking the opcode of the instruction.
Differential revision: https://reviews.llvm.org/D97766
ST_Data is used to model BFD `BFD_OBJECT`.
A STT_TLS symbol does not have the `BFD_OBJECT` flag in BFD.
This makes sense because a STT_TLS symbol is like in a different address space,
normal data/object properties do not apply on them.
With this change, a STT_TLS symbol will not be displayed as 'O'.
This new behavior matches objdump.
Differential Revision: https://reviews.llvm.org/D96735
Merging directories and files may produce different results on different
platforms.
Merging "./Inputs" and "source-interleave-x86_64.c" will use different
separators in POSIX and Windows.
Dedicated tests are needed for dealing with removing trailing separators
for POSIX (consider only '/') and Windows (consider '/' and '\').
Fixes D85024.
Fixes PR46368.
Reviewed By: jhenderson, MaskRay
Differential revision: https://reviews.llvm.org/D95513
Warnings have been added for three cases (PR41905): (1) missing debug info, (2)
the source file cannot be found, (3) the debug info points at a line beyond the
end of the file.
(1) is probably less useful. This was brought up once on
http://lists.llvm.org/pipermail/llvm-dev/2020-April/141264.html and two
internal users mentioned it to me that it was annoying. (I personally
find the warning confusing, too.)
Users specify --source to get additional information if sources happen to be
available. If sources are not available, it should be obvious as the output
will have no interleaved source lines. The warning can be especially annoying
when using llvm-objdump -S on a bunch of files.
This patch drops the warning when there is no debug info.
(If LLVMSymbolizer::symbolizeCode returns an `Error`, there will still be
an error. There is currently no test for an `Error` return value.
The only code path is probably a broken symbol table, but we probably already emit a warning
in that case)
`source-interleave-prefix.test` has an inappropriate "malformed" test - the test simply has no
.debug_* because new llc does not produce debug info when the filename is empty (invalid).
I have tried tampering the header of .debug_info/.debug_line but llvm-symbolizer does not warn.
This patch does not intend to add the missing test coverage.
Differential Revision: https://reviews.llvm.org/D88715
For x86-64 the REX.w prefix takes precedence over any other size
override (i.e. 0x66). Therefore, for x86-64 when REX.w is present set
'hasOpSize' to false to ensure that any size override is ignored.
Fixes PR48901.
Differential Revision: https://reviews.llvm.org/D95682
Compact unwind entries have 8 bits for the encoding-table offset:
* offsets 0..126 reference the global commmon-encodings table, while
* offsets 127..255 reference a per-second-level-page table.
This diff teaches `llvm-objdump` to print this per-page encodings table.
Differential Revision: https://reviews.llvm.org/D93265
This patch adds the ability to evaluate the state machine for CIE and FDE unwind objects and produce a UnwindTable with all UnwindRow objects needed to unwind registers. It will also dump the UnwindTable for each CIE and FDE when dumping DWARF .debug_frame or .eh_frame sections in llvm-dwarfdump or llvm-objdump. This allows users to see what the unwind rows actually look like for a given CIE or FDE instead of just seeing a list of opcodes.
This patch adds new classes: UnwindLocation, RegisterLocations, UnwindRow, and UnwindTable.
UnwindLocation is a class that describes how to unwind a register or Call Frame Address (CFA).
RegisterLocations is a class that tracks registers and their UnwindLocations. It gets populated when parsing the DWARF call frame instruction opcodes for a unwind row. The registers are mapped from their register numbers to the UnwindLocation in a map.
UnwindRow contains the result of evaluating a row of DWARF call frame instructions for the CIE, or a row from a FDE. The CIE can produce a set of initial instructions that each FDE that points to that CIE will use as the seed for the state machine when parsing FDE opcodes. A UnwindRow for a CIE will not have a valid address, whille a UnwindRow for a FDE will have a valid address.
The UnwindTable is a class that contains a sorted (by address) vector of UnwindRow objects and is the result of parsing all opcodes in a CIE, or FDE. Parsing a CIE should produce a UnwindTable with a single row. Parsing a FDE will produce a UnwindTable with one or more UnwindRow objects where all UnwindRow objects have valid addresses. The rows in the UnwindTable will be sorted from lowest Address to highest after parsing the state machine, or an error will be returned if the table isn't sorted. To parse a UnwindTable clients can use the following methods:
static Expected<UnwindTable> UnwindTable::create(const CIE *Cie);
static Expected<UnwindTable> UnwindTable::create(const FDE *Fde);
A valid table will be returned if the DWARF call frame instruction opcodes have no encoding errors. There are a few things that can go wrong during the evaluation of the state machine and these create functions will catch and return them.
Differential Revision: https://reviews.llvm.org/D89845
This makes the following improvements.
For `SHT_GNU_versym`:
* yaml2obj: set `sh_link` to index of `.dynsym` section automatically.
For `SHT_GNU_verdef`:
* yaml2obj: set `sh_link` to index of `.dynstr` section automatically.
* yaml2obj: set `sh_info` field automatically.
* obj2yaml: don't dump the `Info` field when its value matches the number of version definitions.
For `SHT_GNU_verneed`:
* yaml2obj: set `sh_link` to index of `.dynstr` section automatically.
* yaml2obj: set `sh_info` field automatically.
* obj2yaml: don't dump the `Info` field when its value matches the number of version dependencies.
Also, simplifies few test cases.
Differential revision: https://reviews.llvm.org/D94956
Similar to D77853. Change ADRP to print the target address in hex, instead of the raw immediate.
The behavior is similar to GNU objdump but we also include `0x`.
Note: GNU objdump is not consistent whether or not to emit `0x` for different architectures. We try emitting 0x consistently for all targets.
```
GNU objdump: adrp x16, 10000000
Old llvm-objdump: adrp x16, #0
New llvm-objdump: adrp x16, 0x10000000
```
`adrp Xd, 0x...` assembles to a relocation referencing `*ABS*+0x10000` which is not intended. We need to use a linker or use yaml2obj.
The main test is `test/tools/llvm-objdump/ELF/AArch64/pcrel-address.yaml`
Differential Revision: https://reviews.llvm.org/D93241
This also teaches MachO writers/readers about the MachO cpu subtype,
beyond the minimal subtype reader support present at the moment.
This also defines a preprocessor macro to allow users to distinguish
__arm64__ from __arm64e__.
arm64e defaults to an "apple-a12" CPU, which supports v8.3a, allowing
pointer-authentication codegen.
It also currently defaults to ios14 and macos11.
Differential Revision: https://reviews.llvm.org/D87095
This does the same as `--mcpu=help` but was only
documented in the user guide.
* Added a test for both options.
* Corrected the single dash in `-mcpu=help` text.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D92305
Imagine we have a YAML declaration of few sections: `foo1`, `<unnamed 2>`, `foo3`, `foo4`.
To put them into segment we can do (1*):
```
Sections:
- Section: foo1
- Section: foo4
```
or we can use (2*):
```
Sections:
- Section: foo1
- Section: foo3
- Section: foo4
```
or (3*) :
```
Sections:
- Section: foo1
## "(index 2)" here is a name that we automatically created for a unnamed section.
- Section: (index 2)
- Section: foo3
- Section: foo4
```
It looks really confusing that we don't have to list all of sections.
At first I've tried to make this rule stricter and report an error when there is a gap
(i.e. when a section is included into segment, but not listed explicitly).
This did not work perfect, because such approach conflicts with unnamed sections/fills (see (3*)).
This patch drops "Sections" key and introduces 2 keys instead: `FirstSec` and `LastSec`.
Both are optional.
Differential revision: https://reviews.llvm.org/D90458
This removes Inputs/libbogus11.a
Initially I've removed it in D90013, but had to restore it, because BB found this
test is using it.
I've updated the test to use YAMLs, added comment and one more possible error check.
Differential revision: https://reviews.llvm.org/D90312
Currently the test uses 14 precompiled binaries. With the functionality
implemented in D89949, it is possible to remove them and use YAMLs instead.
Differential revision: https://reviews.llvm.org/D90013
The prefix given to --prefix will be added to GNU absolute paths when
used with --source option (source interleaved with the disassembly).
This matches GNU's objdump behavior.
GNU and C++17 rules for absolute paths are different.
Differential Revision: https://reviews.llvm.org/D85024
Fixes PR46368.
Differential Revision: https://reviews.llvm.org/D85024
I recently came across a MachO with multiple sections of the same name but
different segments. We should emit the segment name alongside the section name
for MachO's.
Differential Revision: https://reviews.llvm.org/D87119
AMDGPU ISA isn't backwards compatible and hence -mcpu must always be specified during disassembly.
However, the AMDGPU target CPU is stored in e_flags in the ELF object.
This patch allows targets to implement CPU string detection, and also implements it for AMDGPU by looking at e_flags.
Reviewed By: scott.linder
Differential Revision: https://reviews.llvm.org/D84519
When diffing disassembly dump of two binaries, I see lots of noises from mismatched jump target addresses and global data references, which unnecessarily causes diffs on every function, making it impractical. I'm trying to symbolize the raw binary addresses to minimize the diff noise.
In this change, a local branch target is modeled as a label and the branch target operand will simply be printed as a label. Local labels are collected by a separate pre-decoding pass beforehand. A global data memory operand will be printed as a global symbol instead of the raw data address. Unfortunately, due to the way the disassembler is set up and to be less intrusive, a global symbol is always printed as the last operand of a memory access instruction. This is less than ideal but is probably acceptable from checking code quality point of view since on most targets an instruction can have at most one memory operand.
So far only the X86 disassemblers are supported.
Test Plan:
llvm-objdump -d --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
mov eax, dword ptr [rsp]
cmp eax, dword ptr [rip + 4112] # 202182 <g>
jge 0x20117e <_start+0x25>
call 0x201158 <foo>
inc dword ptr [rsp]
jmp 0x201169 <_start+0x10>
xor eax, eax
pop rcx
ret
```
llvm-objdump -d **--symbolize-operands** --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
<L1>:
mov eax, dword ptr [rsp]
cmp eax, dword ptr <g>
jge <L0>
call <foo>
inc dword ptr [rsp]
jmp <L1>
<L0>:
xor eax, eax
pop rcx
ret
```
Note that the jump instructions like `jge 0x20117e <_start+0x25>` without this work is printed as a real target address and an offset from the leading symbol. With a change in the optimizer that adds/deletes an instruction, the address and offset may shift for targets placed after the instruction. This will be a problem when diffing the disassembly from two optimizers where there are unnecessary false positives due to such branch target address changes. With `--symbolize-operand`, a label is printed for a branch target instead to reduce the false positives. Similarly, the disassemble of PC-relative global variable references is also prone to instruction insertion/deletion.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D84191
If the referenced symbol of a J[U]MP_SLOT is invalid (e.g. symbol index 0), llvm-objdump -d will bail out:
```
error: 'a': st_name (0x326600) is past the end of the string table of size 0x7
```
where 0x326600 is the st_name field of the first entry past the end of .symtab
Change it to a warning to continue dumping.
`X86/plt.test` uses a prebuilt executable, so I pick `ELF/AArch64/plt.test`
which has a YAML input and can be easily modified.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85623
Add support for constant MachO::CPU_SUBTYPE_ARM64_V8. This constant is
needed so as to match `llvm-libtool-darwin`'s behavior to that of
cctools' libtool when `-arch_only` flag is passed in on command line.
Reviewed by jhenderson, alexshap, smeenai
Differential Revision: https://reviews.llvm.org/D85041
llvm-objdump currently calls report_fatal_error() when the e_phoff field is invalid.
This is tested by elf-invalid-phdr.test which has the following issues:
1) It uses a precompiled object.
2) it could be a part of invalid.test.
3) It tests the Object lib, but we have no separate test for llvm-objdump.
This patch addresses issues mentioned.
Differential revision: https://reviews.llvm.org/D83559
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Differential revision: https://reviews.llvm.org/D70720
Nico Weber