This removes Inputs/libbogus11.a
Initially I've removed it in D90013, but had to restore it, because BB found this
test is using it.
I've updated the test to use YAMLs, added comment and one more possible error check.
Differential revision: https://reviews.llvm.org/D90312
Currently the test uses 14 precompiled binaries. With the functionality
implemented in D89949, it is possible to remove them and use YAMLs instead.
Differential revision: https://reviews.llvm.org/D90013
Merge symbol-table-elf.test and common-symbol-elf.test, and add some
more tests (invalid st_type, STT_COMMON, STT_GNU_IFUNC, STT_HIOS, STT_LOPROC, SHN_UNDEF, SHN_ABS, SHN_COMMON, STB_GNU_UNIQUE, invalid binding, etc) to test/llvm-objdump/ELF/symbol-table.test
The naming follows test/llvm-{readobj,objcopy}/ELF .
Some discrepancy from GNU objdump:
* STT_COMMON: can be produced with `ld.bfd -r -z common`, but it almost never exists in practice
* STT_GNU_IFUNC: will be fixed by D75793
* STB_GNU_UNIQUE: will be fixed by D75797
* STT_TLS: GNU objdump does not print 'O'
* unknown binding: GNU objdump does not print 'g'. This probably does not matter.
* A reserved symbol index is displayed as *ABS* in GNU objdump. It is not clear what we should print.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D75796
Summary:
llvm-objdump will commonly error out when disassembling a Mach-O binary with
stab symbols, or when printing a Mach-O symbol table that includesstab symbols.
That is because the Mach-O N_OSO symbol has been modified to include the
bottom 8-bit value of the Mach-O's cpusubtype value in the section field. In
general, one cannot blindly assume a stab symbol's section field is valid
unless one has actually consulted the specification for the specific stab.
Since objdump mostly just walks the symbol table to get mnemonics for code
disassembly it's best for objdump to just ignore stab symbols. llvm-nm will
do a more complete and correct job of displaying Mach-O symbol table contents.
Reviewers: pete, lhames, ab, thegameg, jhenderson, MaskRay
Reviewed By: thegameg, MaskRay
Subscribers: MaskRay, rupprecht, seiya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71394
Also improve assembler parser register validation for .seh_ directives.
This requires moving X86-specific seh directive handling into the x86
backend, which addresses some assembler FIXMEs.
Differential Revision: https://reviews.llvm.org/D66625
llvm-svn: 370533
This is the first in a set of patches I have to improve testing of
llvm-objdump. This patch targets --all-headers, --section, and
--full-contents. In the --section case, it deletes a pre-canned binary
which is only used by the one test and replaces it with yaml.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D61941
llvm-svn: 360893
Adds a representation of the section header table to XCOFFObjectFile,
and implements enough to dump the section headers with llvm-obdump.
Differential Revision: https://reviews.llvm.org/D60784
llvm-svn: 359244
Another attempt to land the changes in debug line header to prevent duplicate
files in Dwarf 5. I rolled back my previous commit because of a mistake in
generating the object file in a test. Meanwhile, I addressed some offline
comments and changed the implementation; the largest difference is that
MCDwarfLineTableHeader does not keep DwarfVersion but gets it as a parameter. I
also merged the patch to fix two lld tests that will strt to fail into this
patch.
Original Commit:
https://reviews.llvm.org/D59515
Original Message:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf
5) However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
llvm-svn: 358732
This reverts commit rL357020.
The commit broke the test llvm/test/tools/llvm-objdump/embedded-source.test
on some builds including clang-ppc64be-linux-multistage,
clang-s390x-linux, clang-with-lto-ubuntu, clang-x64-windows-msvc,
llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast (and others).
llvm-svn: 357026
Reapply rL356941 after regenerating the object file in the failing test
llvm/test/tools/llvm-objdump/embedded-source.test from source.
Original commit message:
[llvm] Prevent duplicate files in debug line header in dwarf 5.
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 357018
Summary:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Reviewers: dblaikie, probinson, aprantl, espindola
Reviewed By: probinson
Subscribers: emaste, jvesely, nhaehnle, aprantl, javed.absar, arichardson, hiraditya, MaskRay, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 356941
Summary:
llvm-objdump (via libObject) validates DYLD_INFO rebase and bind
entries against the basic structure found in the Mach-O file before
evaluating the contents of those entries. Certain malformed Mach-Os can
defeat the validation check and force llvm-objdump (libObject) to crash.
The previous logic verified a rebase or bind started in a valid Mach-O
section, but did not verify that the section wholely contained the
fixup. It also generally allows rebases or binds to start immediately
after a valid section even if that range is not itself part of a valid
section. Finally, bind and rebase opcodes that indicate more than one
fixup (apply N times...) are not completely validated: only the first
and final fixups are checked.
The previous logic also rejected certain binaries as false positives.
Some bind and rebase opcodes can modify the state machine such that the
next bind or rebase will fail. libObject will reject these opcodes as
invalid in order to be helpful and print an error message associated
with the instruction that caused the problem, even though the binary is
not actually illegal until it consumes the invalid state in the state
machine. In other words, libObject may reject a Mach-O binary that
Apple's dynamic linker may consider legal. The original version of
macho-rebase-add-addr-uleb-too-big is an example of such a binary.
I have replaced the existing checkSegAndOffset and checkCountAndSkip
functions with a single function, checkSegAndOffsets, which validates
all of the fixups realized by a DYLD_INFO opcode. checkSegAndOffsets
verifies that a Mach-O section fully contains each fixup. Every fixup
realized by an opcode is validated, and some (but not all!)
inconsistencies in the state machine are allowed until a fixup is
realized. This means that libObject may fail on an opcode that realizes
a fixup, not on the opcode that introduced the arithmetic error.
Existing test cases have been modified to reflect the changes in error
messages returned by libObject. What's more, the test case for
macho-rebase-add-addr-uleb-too-big has been modified so that it actually
triggers the error condition; the new code in libObject considers the
original test binary "legal".
rdar://47797757
Reviewers: lhames, pete, ab
Reviewed By: pete
Subscribers: rupprecht, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59574
llvm-svn: 356629
PE/COFF sections can have section names truncated to 8 chars, in order to
have the name available at runtime. (The string table, where long untruncated
names are stored, isn't loaded at runtime.)
This allows various llvm tools to dump the .eh_frame section from such
executables.
Patch by Peiyuan Song!
Differential Revision: https://reviews.llvm.org/D55407
llvm-svn: 348708
Summary:
This updates generated binaries and corresponding test cases up to date
after applying FixFunctionBitcasts pass.
Reviewers: sbc100
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54070
llvm-svn: 346286
Summary: The final -wasm component has been the default for some time now.
Subscribers: jfb, dschuff, jgravelle-google, eraman, aheejin, JDevlieghere, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D46342
llvm-svn: 332007
Summary: Also test for symbols information in test/MC/WebAssembly/debug-info.ll.
Subscribers: jfb, dschuff, jgravelle-google, aheejin, sunfish, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46160
llvm-svn: 331005
When disassembling with -D, skip virtual sections by printing "..." for
each symbol.
This patch also implements `MachOObjectFile::isSectionVirtual`.
Test case comes from:
```
.zerofill __DATA,__common,_data64unsigned,472,3
```
Differential Revision: https://reviews.llvm.org/D45824
llvm-svn: 330342
This is required in order to enable relocs to be validated
as they are read in.
Also update tests with new section ordering.
Differential Revision: https://reviews.llvm.org/D43940
llvm-svn: 326694
This is combination of two patches by Nicholas Wilson:
1. https://reviews.llvm.org/D41954
2. https://reviews.llvm.org/D42495
Along with a few local modifications:
- One change I made was to add the UNDEFINED bit to the binary format
to avoid the extra byte used when writing data symbols. Although this
bit is redundant for other symbols types (i.e. undefined can be
implied if a function or global is a wasm import)
- I prefer to be explicit and consistent and not have derived flags.
- Some field renaming.
- Some reverting of unrelated minor changes.
- No test output differences.
Differential Revision: https://reviews.llvm.org/D43147
llvm-svn: 325860
lld needs a matching change for this will be my next commit.
Expect it to fail build until that matching commit is picked up by the bots.
Like the changes in r296527 for dyld bind entires and the changes in
r298883 for lazy bind, weak bind and rebase entries the export
entries are the last of the dyld compact info to have error handling added.
This follows the model of iterators that can fail that Lang Hanes
designed when fixing the problem for bad archives r275316 (or r275361).
So that iterating through the exports now terminates if there is an error
and returns an llvm::Error with an error message in all cases for malformed
input.
This change provides the plumbing for the error handling, all the needed
testing of error conditions and test cases for all of the unique error messages.
llvm-svn: 308690
For each checked-in wasm file, make sure the there is
corresponding .ll file that can be used to regenerate it
if needed.
Add test/Object/Inputs/trivial-object-test.wasm to match other
formats and add some new wasm tests in test/Object.
Differential Revision: https://reviews.llvm.org/D35213
llvm-svn: 307585
BIND_OPCODE_DONE/REBASE_OPCODE_DONE may appear at the end of the opcode array,
but they are not required to. The linker only adds them as padding to align the
opcodes to pointer size.
This fixes rdar://problem/31285560.
llvm-svn: 299104
Mostly this change adds support converting to and from
YAML which will allow us to write more test cases for
the WebAssembly MC and lld ports.
Better support for objdump, readelf, and nm will be in
followup CLs.
I had to update the two wasm test binaries because they
used the old style 'name' section which is no longer
supported.
Differential Revision: https://reviews.llvm.org/D31099
Patch by Sam Clegg
llvm-svn: 299101
rebase entry errors and test cases for each of the error checks.
Also verified with Nick Kledzik that a BIND_OPCODE_SET_ADDEND_SLEB
opcode is legal in a lazy bind table, so code that had that as an error
check was removed.
With MachORebaseEntry and MachOBindEntry classes now returning
an llvm::Error in all cases for malformed input the variables Malformed
and logic to set use them is no longer needed and has been removed
from those classes.
Also in a few places, removed the redundant Done assignment to true
when also calling moveToEnd() as it does that assignment.
This only leaves the dyld compact export entries left to have
error handling yet to be added for the dyld compact info.
llvm-svn: 298883
and test cases for each of the error checks.
To do this more plumbing was needed so that the segment indexes and
segment offsets can be checked. Basically what was done was the SegInfo
from llvm-objdump’s MachODump.cpp was moved into libObject for Mach-O
objects as BindRebaseSegInfo and it is only created when an iterator for
bind or rebase entries are created.
This commit really only adds the error checking and test cases for the
bind table entires and the checking for the lazy bind and weak bind entries
are still to be fully done as well as the rebase entires. Though some of
the plumbing for those are added with this commit. Those other error
checks and test cases will be added in follow on commits.
Note, the two llvm_unreachable() calls should now actually be unreachable
with the error checks in place and would take a logic bug in the error
checking code to be reached if the segment indexes and segment
offsets are used from a checked bind entry. Comments have been added
to the methods that require the arguments to have been checked
prior to calling.
llvm-svn: 298292
Disassembly currently begins from addresses obtained from the objects
symbol table. For ELF, add the dynamic symbols to the list if no
static symbols are available so that we can more successfully
disassemble stripped binaries.
Differential Revision: https://reviews.llvm.org/D29632
llvm-svn: 294430
This is the first part of an effort to add wasm binary
support across all llvm tools.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D26172
llvm-svn: 288251
This adds behaviour similar to binutils' objdump which can show symbols in an
import library. Differences from that stem around the fact that we do not
create section symbols nor the all import import descriptor symbol reference.
However, this does mean that the tool can serve as a possible replacement for
the existing tool.
llvm-svn: 279088
This reverts commit the revert commit r277627. The build errors
mentioned in r277627 were likely caused by an unclean build directory.
Sorry for the noise.
llvm-svn: 277630
This reverts commit r277540. It breaks the build with:
../lib/Object/Archive.cpp:264:41: error: return type of out-of-line definition of 'llvm::object::ArchiveMemberHeader::getUID' differs from that in the declaration
Expected<unsigned> ArchiveMemberHeader::getUID() const {
~~~~~~~~~~~~~~~~~~ ^
include/llvm/Object/Archive.h:53:12: note: previous declaration is here
unsigned getUID() const;
~~~~~~~~ ^
llvm-svn: 277627
Georgii Rymar