Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied without modifications, the bot failure was unrelated).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
and follow-ups:
a2ca1c2d "build: disable zlib by default on Windows"
2181bf40 "[CMake] Link against ZLIB::ZLIB"
1079c68a "Attempt to fix ZLIB CMake logic on Windows"
This changed the output of llvm-config --system-libs, and more
importantly it broke stand-alone builds. Instead of piling on more fix
attempts, let's revert this to reduce the risk of more breakages.
Summary:
This packet is necessary to make lldb work with the remote-gdb stub in
user mode qemu when running position-independent binaries. It reports
the relative position (load bias) of the loaded executable wrt. the
addresses in the file itself.
Lldb needs to know this information in order to correctly set the load
address of the executable. Normally, lldb would be able to find this out
on its own by following the breadcrumbs in the process auxiliary vector,
but we can't do this here because qemu does not support the
qXfer:auxv:read packet.
This patch does not implement full scope of the qOffsets packet (it only
supports packets with identical code, data and bss offsets), because it
is not fully clear how should the different offsets be handled and I am
not aware of a producer which would make use of this feature (qemu will
always
<https://github.com/qemu/qemu/blob/master/linux-user/elfload.c#L2436>
return the same value for code and data offsets). In fact, even gdb
ignores the offset for the bss sections, and uses the "data" offset
instead. So, until the we need more of this packet, I think it's best
to stick to the simplest solution possible. This patch simply rejects
replies with non-uniform offsets.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74598
StringRef will call strlen on the C string which is inefficient (as ConstString already
knows the string lenght and so does StringRef). This patch replaces all those calls
with GetStringRef() which doesn't recompute the length.
Due to a c++ quirk, these are found through ADL only when a function with that
name is found through regular lookup. We have one such function in SharingPtr.h,
but I am trying to remove it.
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
qemu has a very small maximum packet size (4096) and it actually
only uses half of that buffer for some implementation reason,
so when lldb asks for the register target definitions, the x86_64
definition is larger than 4096/2 and we need to fetch it in two parts.
This patch and test is fixing a bug in
GDBRemoteCommunicationClient::ReadExtFeature when reading a target
file in multiple parts. lldb was assuming that it would always
get back the maximum packet size response (4096) instead of
using the actual size received and asking for the next group of
bytes.
We now have two tests in gdb_remote_client for unique features
of qemu - TestNestedRegDefinitions.py would test the ability
of lldb to follow multiple levels of xml includes; I opted to
create a separate TestRegDefinitionInParts.py test to test this
wrinkle in qemu's gdb remote serial protocol stub implementation.
Instead of combining both tests into a single test file.
<rdar://problem/49537922>
Rather than handling zlib handling manually, use `find_package` from CMake
to find zlib properly. Use this to normalize the `LLVM_ENABLE_ZLIB`,
`HAVE_ZLIB`, `HAVE_ZLIB_H`. Furthermore, require zlib if `LLVM_ENABLE_ZLIB` is
set to `YES`, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This restores 68a235d07f,
e6c7ed6d21. The problem with the windows
bot is a need for clearing the cache.
This reverts commit 68a235d07f.
This commit broke the clang-x64-windows-msvc build bot and a follow-up
commit did not fix it. Reverting to fix the bot.
Rather than handling zlib handling manually, use `find_package` from CMake
to find zlib properly. Use this to normalize the `LLVM_ENABLE_ZLIB`,
`HAVE_ZLIB`, `HAVE_ZLIB_H`. Furthermore, require zlib if `LLVM_ENABLE_ZLIB` is
set to `YES`, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
Following up on https://reviews.llvm.org/D62221, this change introduces
the settings plugin.process.gdb-remote.use-g-packet-for-reading. When
they are on, 'g' packets are used for reading registers.
Using 'g' packets can improve performance by reducing the number of
packets exchanged between client and server when a large number of
registers needs to be fetched.
Differential revision: https://reviews.llvm.org/D62931
This patch removes the size_t return value and the append parameter
from the remainder of the Find.* functions in LLDB's internal API. As
in the previous patches, this is motivated by the fact that these
parameters aren't really used, and in the case of the append parameter
were frequently implemented incorrectly.
Differential Revision: https://reviews.llvm.org/D69119
llvm-svn: 375160
Summary:
This patch re-types everywhere that passes a File::OpenOptions
as a uint32_t so it actually uses File::OpenOptions.
It also converts some OpenOptions related functions that fail
by returning 0 or NULL into llvm::Expected
split off from https://reviews.llvm.org/D68737
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68853
llvm-svn: 374817
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
> llvm-svn: 374584
llvm-svn: 374631
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
> llvm-svn: 374584
llvm-svn: 374626
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
> llvm-svn: 374584
llvm-svn: 374622
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
> llvm-svn: 374584
llvm-svn: 374620
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
> llvm-svn: 374584
llvm-svn: 374609
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
llvm-svn: 374584
Summary:
Someone wrote SetEffectiveSetEffectiveGroupID instead of SetEffectiveUserID.
After this fix, the android process list can show user names, e.g.
```
PID PARENT USER GROUP EFF USER EFF GROUP TRIPLE ARGUMENTS
====== ====== ========== ========== ========== ========== ============================== ============================
529 1 root 0 root 0 /sbin/ueventd
```
Reviewers: labath,clayborg,aadsm,xiaobai
Subscribers:
llvm-svn: 373953
Summary:
For context: https://reviews.llvm.org/D68293
We need a way to show all the processes on android regardless of the user id.
When you run `platform process list`, you only see the processes with the same user as the user that launched lldb-server. However, it's quite useful to see all the processes, though, and it will lay a foundation for full apk debugging support from lldb.
Before:
```
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
3234 1 aarch64-unknown-linux-android adbd
8034 3234 aarch64-unknown-linux-android sh
9096 3234 aarch64-unknown-linux-android sh
9098 9096 aarch64-unknown-linux-android lldb-server
(lldb) ^D
```
Now:
```
(lldb) platform process list -x
205 matching processes were found on "remote-android"
PID PARENT USER TRIPLE NAME
====== ====== ========== ======================== ============================
1 0 init
524 1 init
525 1 init
531 1 ueventd
568 1 logd
569 1 aarch64-unknown-linux-android servicemanager
570 1 aarch64-unknown-linux-android hwservicemanager
571 1 aarch64-unknown-linux-android vndservicemanager
577 1 aarch64-unknown-linux-android qseecomd
580 577 aarch64-unknown-linux-android qseecomd
...
23816 979 com.android.providers.calendar
24600 979 com.verizon.mips.services
27888 979 com.hualai
28043 2378 com.android.chrome:sandboxed_process0
31449 979 com.att.shm
31779 979 com.samsung.android.authfw
31846 979 com.samsung.android.server.iris
32014 979 com.samsung.android.MtpApplication
32045 979 com.samsung.InputEventApp
```
Reviewers: labath,xiaobai,aadsm,clayborg
Subscribers:
llvm-svn: 373931
This patch replaces the LLDB's JSON implementation with the one from
LLVM in GDBRemoteCommunicationClient.
Differential revision: https://reviews.llvm.org/D68301
llvm-svn: 373498
plugin.
Unfortunately the test is currently XFAILed because of missing changes
to the clang driver.
Differential Revision: https://reviews.llvm.org/D67124
llvm-svn: 370931
This patch removes the two variant of StringExtractor::GetStringRef that
return (non-)const references to std::string. The non-const one was
being abused to reinitialize the StringExtractor and its uses are
replaced by calls to the copy asignment operator. The const variant was
refactored to return an actual llvm::StringRef.
llvm-svn: 369493
Summary:
This test doesn't make sense. Change to be consistent with what we did
in GDBRemoteCommunication.cpp.
Reviewers: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65965
llvm-svn: 368352
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
The arbitrary timeout when flushing GDB remote packets caused
non-determinism and flakiness between test runs. I suspect it is what's
causing the flakiness of the reproducer tests on GreenDragon, and want
to see if removing it causes that to go away.
This change was originally introduced in r197579 to discard a
`$T02thread:01;#4` that QEMU was sending. If anybody knows how to test
that this continues working after removing this code, I'd love to hear
it.
llvm-svn: 364669
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
While here, update some ppc64le specific check to isPPC64(), if it
applies to big-endian as well, in the hope that it will ease the support
of big-endian if people are interested in this area. The big-endian
variant is used by at least FreeBSD, Gentoo Linux, Adélie Linux, and
Void Linux.
llvm-svn: 360868
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
This patch adds an XCOFF triple object format type into LLVM.
This XCOFF triple object file type will be used later by object file and assembly generation for the AIX platform.
Differential Revision: https://reviews.llvm.org/D58930
llvm-svn: 355989
My apologies for the large patch. With the exception of ConstString.h
itself it was entirely produced by sed.
ConstString has exactly one const char * data member, so passing a
ConstString by reference is not any more efficient than copying it by
value. In both cases a single pointer is passed. But passing it by
value makes it harder to accidentally return the address of a local
object.
(This fixes rdar://problem/48640859 for the Apple folks)
Differential Revision: https://reviews.llvm.org/D59030
llvm-svn: 355553
This enables the function to be called with a StringRef without jumping
through any hoops. I rename the function to "PutStringAsRawHex8" to
honor the extended interface. I also remove ".c_str()" from any calls to
this function I could find.
llvm-svn: 353841
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
systems. It has been available in the OS over over three years
now. If lldb doesn't link against -lcompression, it should be an
error.
Allocate a scratch buffer for libcompression to use when decoding
packets, instead of it having to allocate & free one on every call.
Fix a typeo with the size of the buffer that compression_decode_buffer()
is expanding into.
<rdar://problem/41601084>
llvm-svn: 349563
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
qWatchpointSupportInfo packet correctly.
In GDBRemoteCommunicationClient::GetWatchpointSupportInfo,
if the response to qWatchpointSupportInfo does not
include the 'num' field, then we did not get an answer
we understood, mark this target as not supporting that
packet.
In Target.cpp, rename the very confusingly named
CheckIfWatchpointsExhausted to CheckIfWatchpointsSupported,
and check the error status returned by
Process::GetWatchpointSupportInfo. If we cannot determine
what the number of supported watchpoints are, assume that
they will work. We'll handle the failure
later when we try to create/enable the watchpoint if the
Z2 packet isn't supported.
Add a gdb_remote_client test case.
<rdar://problem/42621432>
llvm-svn: 346561
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
Host info computation can involve DNS traffic (to compute the remote
host name). On very unreliable networks (such as free WiFi on trains),
this can take several seconds to complete or timeout. Increase the
qHostInfo timeout to account for this.
llvm-svn: 341164
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary:
This has multiple advantages:
- we need only one function argument/instance variable instead of three
- no need to default initialize variables
- no custom parsing code
- VersionTuple has comparison operators, which makes version comparisons much
simpler
Reviewers: zturner, friss, clayborg, jingham
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D47889
llvm-svn: 334950
SetFile has an optional style argument which defaulted to the native
style. This patch makes that argument mandatory so clients of the
FileSpec class are forced to think about the correct syntax.
At the same time this introduces a (protected) convenience method to
update the file from within the FileSpec class that keeps the current
style.
These two changes together prevent a potential pitfall where the style
might be forgotten, leading to the path being updated and the style
unintentionally being changed to the host style.
llvm-svn: 334663
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
The Args class is used in plenty of places besides the command
interpreter (e.g., anything requiring an argc+argv combo, such as when
launching a process), so it needs to be in a lower layer. Now that the
class has no external dependencies, it can be moved down to the Utility
module.
This removes the last (direct) dependency from the Host module to
Interpreter, so I remove the Interpreter module from Host's dependency
list.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D45480
llvm-svn: 330200
While trying to use this header I noticed that it is not in the include
folder. Move it to there and update all #includes to reference that file
correctly.
llvm-svn: 327996
The difference between this and the previous patch is that now we use
ELF physical addresses only for loading objects into the target (and the
rest of the module load address logic still uses virtual addresses).
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: llvm-commits, arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>.
llvm-svn: 327970
This reverts commit r326261 as it introduces inconsistencies in the
handling of load addresses for ObjectFileELF -- some parts of the class
use physical addresses, and some use virtual. This has manifested itself
as us not being able to set the load address of the vdso "module" on
android.
llvm-svn: 326367
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 326261
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
The recent UUID cleanups exposed a bug in the parsing code for the
jModulesInfo response, which was passing wrong value for the second
argument to UUID::SetFromStringRef (it passed the length of the string,
whereas the correct value should be the number of decoded bytes we
expect to receive).
This was not picked up by tests, because they test with 16-byte uuids,
for which the function happens to do the right thing even if the length
does not match (if the length does not match, the function does not
update m_num_uuid_bytes member, but that member is already 16 to begin
with).
I fix that and add a test with 20-byte uuid to catch if this regresses.
I have also added more safeguards into the parsing code to fail if we
cannot parse the entire uuid field we recieve. While testing the latter
part, I noticed that the "negative" jModulesInfo tests were succeeding
because we were sending malformed json (and not because the json
contents was invalid), so I make those tests a bit more robuts as well.
llvm-svn: 320985
Null-checking functions which aren't marked weak_import is a no-op
(the compiler rewrites the check to 'true'), regardless of whether a
library providing its definition is weak-linked. If the deployment
target is greater than the minimum requirement, the availability markup
on APIs does not lower to weak_import.
Remove no-op null checks to clean up the code and silence warnings.
Differential Revision: https://reviews.llvm.org/D40812
llvm-svn: 319936
On Linux lldb-server sends an OK response to qfThreadInfo if no process
is started yet. I don't know why would LLDB issue a qfThreadInfo packet
before starting a process but creating a fake thread ID in case of an
OK or Error respoinse sounds bad anyway so lets not do it.
llvm-svn: 313525
OpenOCD sends register classes as two separate <feature> nodes, fixed parser to process both of them.
OpenOCD returns "l" in response to "qfThreadInfo", so IsUnsupportedResponse() was false and we were ending up without any threads in the process. I think it's reasonable to assume that there's always at least one thread.
llvm-svn: 313442
Summary:
This patch adds support for sending strings along with
error codes in the reply packets. The implementation is
based on the feedback recieved in the lldb-dev mailing
list. The patch also adds an extra packet for the client
to query if the server has the capability to provide
strings along with error replys.
Reviewers: labath, jingham, sas, lldb-commits, clayborg
Reviewed By: labath, clayborg
Differential Revision: https://reviews.llvm.org/D34945
llvm-svn: 307768
Summary:
The changes consist of new packets for trace manipulation and
trace collection. The new packets are also documented. The packets
are capable of providing custom trace specific parameters to start
tracing and also retrieve such configuration from the server.
Reviewers: clayborg, lldb-commits, tberghammer, labath, zturner
Reviewed By: clayborg, labath
Subscribers: krytarowski, lldb-commits
Differential Revision: https://reviews.llvm.org/D32585
llvm-svn: 303972
It was returning const std::string& which was leading to
unnecessary copies all over the place, and preventing people
from doing things like Dict->GetValueForKeyAsString("foo", ref);
llvm-svn: 302875
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Summary:
This aims to verify the validity of the response from the debugging
server in GDBRemoteCommunicationClient::GetMemoryRegionInfo. I was
working with ds2 (https://github.com/facebook/ds2) and encountered a bug
that caused the server's response to have a 'size' value of 0, which
caused lldb to behave incorrectly.
Reviewers: k8stone, labath, clayborg
Reviewed By: labath, clayborg
Subscribers: clayborg, sas, lldb-commits
Differential Revision: https://reviews.llvm.org/D31485
Change by Alex Langford <apl@fb.com>
llvm-svn: 299239
If QPassSignals packaet is supported by lldb-server, lldb-client will
utilize it and ask the server to ignore signals that don't require stops
or notifications.
Such signals will be immediately re-injected into inferior to continue
normal execution.
Differential Revision: https://reviews.llvm.org/D30520
llvm-svn: 297231
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
Summary:
I originally set out to move the NameMatches closer to the relevant
function and add some unit tests. However, in the process I've found a
couple of bugs in the implementation:
- the early exits where not always correct:
- (test==pattern) does not mean the match will always suceed because
of regular expressions
- pattern.empty() does not mean the match will fail because the "" is
a valid prefix of any string
So I cleaned up those and added some tests. The only tricky part here
was that regcomp() implementation on darwin did not recognise the empty
string as a regular expression and returned an REG_EMPTY error instead.
The simples fix here seemed to be to replace the empty expression with
an equivalent non-empty one.
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D30094
llvm-svn: 295651
Summary:
There have been a few new values added to a few LLVM enums
this change makes sure that LLDB code handles them correctly.
Reviewers: labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30005
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 295445
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Also found/fixed one bug identified by this warning in
RenderScriptx86ABIFixups.cpp where a string literal was being used in an
effort to provide a name for an instruction/register, but was instead
being passed as the bool 'isVolatile' parameter.
llvm-svn: 291198
Summary:
This replaces the usage of raw integers with duration classes in the gdb-remote
packet management functions. The values are still converted back to integers once
they go into the generic Communication class -- that I am leaving to a separate
change.
The changes are mostly straight-forward (*), the only tricky part was
representation of infinite timeouts.
Currently, we use UINT32_MAX to denote infinite timeout. This is not well suited
for duration classes, as they tend to do arithmetic on the values, and the
identity of the MAX value can easily get lost (e.g.
microseconds(seconds(UINT32_MAX)).count() != UINT32_MAX). We cannot use zero to
represent infinity (as Listener classes do) because we already use it to do
non-blocking polling reads. For this reason, I chose to have an explicit value
for infinity.
The way I achieved that is via llvm::Optional, and I think it reads quite
natural. Passing llvm::None as "timeout" means "no timeout", while passing zero
means "poll". The only tricky part is this breaks implicit conversions (seconds
are implicitly convertible to microseconds, but Optional<seconds> cannot be
easily converted into Optional<microseconds>). For this reason I added a special
class Timeout, inheriting from Optional, and enabling the necessary conversions
one would normally expect.
(*) The other tricky part was GDBRemoteCommunication::PopPacketFromQueue, which
was needlessly complicated. I've simplified it, but that one is only used in
non-stop mode, and so is untested.
Reviewers: clayborg, zturner, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26971
llvm-svn: 287864
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
The mock server was listening for only one packet (I forgot to put a loop around
it), which caused the client to stall in debug builds, as the timeout there is
1000 seconds. In case of a release builds the test would just silently succeed as
the tested function does not check or report errors (which should be fixed).
This fixes the test by adding the server loop. Since the test was taking quite a
long time now (8s), I have added a parameter to control the amount of data sent
(default 4MB), and call it with a smaller value in the test, to make the test run
faster.
llvm-svn: 285992
Summary:
Most of the changes are very straight-forward, the only tricky part was the
"packet speed-test" function, which is very time-heavy. As the function was
completely untested, I added a quick unit smoke test for it.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25391
llvm-svn: 285602
Where possible, remove the const char* version. To keep the
risk and impact here minimal, I've only done the simplest
functions.
In the process, I found a few opportunities for adding some
unit tests, so I added those as well.
Tested on Windows, Linux, and OSX.
llvm-svn: 281799
Summary:
It fixes the following compile warnings:
1. '0' flag ignored with precision and ‘%d’ gnu_printf format
2. enumeral and non-enumeral type in conditional expression
3. format ‘%d’ expects argument of type ‘int’, but argument 4 has type ...
4. enumeration value ‘...’ not handled in switch
5. cast from type ‘const uint64_t* {aka ...}’ to type ‘int64_t* {aka ...}’ casts away qualifiers
6. extra ‘;’
7. comparison between signed and unsigned integer expressions
8. variable ‘register_operand’ set but not used
9. control reaches end of non-void function
Reviewers: jingham, emaste, zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24331
llvm-svn: 281191
Summary:
This adds the jModulesInfo packet, which is the equivalent of qModulesInfo, but it enables us to
query multiple modules at once. This makes a significant speed improvement in case the
application has many (over a hundred) modules, and the communication link has a non-negligible
latency. This functionality is accessed by ProcessGdbRemote::PrefetchModuleSpecs(), which does
the caching. GetModuleSpecs() is modified to first consult the cache before asking the remote
stub. PrefetchModuleSpecs is currently only called from POSIX-DYLD dynamic loader plugin, after
it reads the list of modules from the inferior memory, but other uses are possible.
This decreases the attach time to an android application by about 40%.
Reviewers: clayborg
Subscribers: tberghammer, lldb-commits, danalbert
Differential Revision: https://reviews.llvm.org/D24236
llvm-svn: 280919
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
The rewrite of StringExtractor::GetHexMaxU32 changes functionality in a way which makes
lldb-server crash. The crash (assert) happens when parsing the "qRegisterInfo0" packet, because
the function tries to drop_front more bytes than the packet contains. It's not clear to me
whether we should consider this a bug in the caller or the callee, but it any case, it worked
before, so I am reverting this until we can figure out what the proper interface should be.
llvm-svn: 280207
Makes Peek() return a StringRef instead of a const char*.
This leads to a few callers of Peek() being able to be made a
little nicer (for example using StringRef member functions instead
of c-style strncmp and related functions) and generally safer
usage.
llvm-svn: 280139
MutableArrayRef<T> is essentially a safer version of passing around
(T*, length) pairs and provides some convenient functions for working
with the data without having to manually manipulate indices.
This is a minor NFC.
llvm-svn: 280123
StringExtractor::GetNameColonValue() looks for a substring of the
form "<name>:<value>" and returns <name> and <value> to the caller.
This results in two unnecessary string copies, since the name and
value are not translated in any way and simply returned as-is.
By converting this to return StringRefs we can get rid of hundreds
of string copies.
llvm-svn: 280000
Summary:
This is a preparatory commit for D22914, where I'd like to replace this mutex by an R/W lock
(which is also not recursive). This required a couple of changes:
- The only caller of Read/WriteRegister, GDBRemoteRegisterContext class, was already acquiring
the mutex, so these functions do not need to. All functions which now do not take a lock, take
an lock argument instead, to remind the caller of this fact.
- GetThreadSuffixSupported() was being called from locked and unlocked contexts (including
contexts where the process was running, and the call would fail if it did not have the result
cached). I have split this into two functions, one which computes the thread suffix support and
caches it (this one always takes the lock), and another, which returns the cached value (and
never needs to take the lock). This feels quite natural as ProcessGdbRemote was already
pre-caching this value at the start.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23802
llvm-svn: 279725
Summary:
The tricky part here was that the exisiting implementation of WriteAllRegisters was expecting
hex-encoded data (as that was what the first implementation I replaced was using, but here we had
binary data to begin with. I thought the read/write register functions would be more useful if
they handled the hex-encoding themselves (all the other client functions provide the responses in
a more-or-less digested form). The read functions return a DataBuffer, so they can allocate as
much memory as they need to, while the write functions functions take an llvm::ArrayRef, as that
can be constructed from pretty much anything.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23659
llvm-svn: 279232
Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279202
Summary:
Before this, each function had a copy of the code which handled appending of the thread suffix to
the packet (or using $Hg instead). I have moved that code into a single function and made
everyone else use that. The function takes the partial packet as a StreamString rvalue reference,
to avoid a copy and to remind the users that the packet will have undeterminate contents after
the call.
This also fixes the incorrect formatting of the QRestoreRegisterState packet in case thread
suffix is not supported.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23604
llvm-svn: 279040
Summary:
When saving/restoring registers the GDBRemoteRegisterContext class was manually constructing
the register save/restore packets. This creates appropriate helper functions in
GDBRemoteCommunicationClient, and switches the class to use those. It also removes what a
duplicate packet send in some of those functions, a thing that I can only attribute to a bad
merge artefact.
I also add a test framework for testing gdb-remote client functionality and add tests for the new
functions I introduced. I'd like to be able to test the register context changes in isolation as
well, but currently there doesn't seem to be a way to reasonably construct a standalone register
context object, so we'll have to rely on the end-to-end tests to verify that.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23553
llvm-svn: 278915
Resumbitting the commit after fixing the following problems:
- broken unit tests on windows: incorrect gtest usage on my part (TEST vs. TEST_F)
- the new code did not correctly handle the case where we went to interrupt the process, but it
stopped due to a different reason - the interrupt request would remain queued and would
interfere with the following "continue". I also added a unit test for this case.
This reapplies r277156 and r277139.
llvm-svn: 278118
This reverts commit r277139, because:
- broken unittest on windows (likely typo on my part)
- seems to break TestCallThatRestart (needs investigation)
llvm-svn: 277154
SendContinuePacketAndWaitForResponse was huge function with very complex interactions with
several other functions (SendAsyncSignal, SendInterrupt, SendPacket). This meant that making any
changes to how packet sending functions and threads interact was very difficult and error-prone.
This change does not add any functionality yet, it merely paves the way for future changes. In a
follow-up, I plan to add the ability to have multiple query packets in flight (i.e.,
request,request,response,response instead of the usual request,response sequences) and use that
to speed up qModuleInfo packet processing.
Here, I introduce two special kinds of locks: ContinueLock, which is used by the continue thread,
and Lock, which is used by everyone else. ContinueLock (atomically) sends a continue packet, and
blocks any other async threads from accessing the connection. Other threads create an instance of
the Lock object when they want to access the connection. This object, while in scope prevents the
continue from being send. Optionally, it can also interrupt the process to gain access to the
connection for async processing.
Most of the syncrhonization logic is encapsulated within these two classes. Some of it still
had to bleed over into the SendContinuePacketAndWaitForResponse, but the function is still much
more manageable than before -- partly because of most of the work is done in the ContinueLock
class, and partly because I have factored out a lot of the packet processing code separate
functions (this also makes the functionality more easily testable). Most importantly, there is
none of syncrhonization code in the async thread users -- as far as they are concerned, they just
need to declare a Lock object, and they are good to go (SendPacketAndWaitForResponse is now a
very thin wrapper around the NoLock version of the function, whereas previously it had over 100
lines of synchronization code). This will make my follow up changes there easy.
I have written a number of unit tests for the new code and I have ran the test suite on linux and
osx with no regressions.
Subscribers: tberghammer
Differential Revision: https://reviews.llvm.org/D22629
llvm-svn: 277139
This finally removes the use of the Mutex and Condition classes. This is an
intricate patch as the Mutex and Condition classes were tied together.
Furthermore, many places had slightly differing uses of time values. Convert
timeout values to relative everywhere to permit the use of
std::chrono::duration, which is required for the use of
std::condition_variable's timeout. Adjust all Condition and related Mutex
classes over to std::{,recursive_}mutex and std::condition_variable.
This change primarily comes at the cost of breaking the TracingMutex which was
based around the Mutex class. It would be possible to write a wrapper to
provide similar functionality, but that is beyond the scope of this change.
llvm-svn: 277011
"Incorrect" file name seen on Android whene the main executable is
called "app_process32" (or 64) but the linker specifies the package
name (e.g. com.android.calculator2). Additionally it can be present
in case of some linker bugs.
This CL adds logic to try to fetch the correct file name from the proc
file system based on the base address sepcified by the linker in case
we are failed to load the module by name.
Differential revision: http://reviews.llvm.org/D22219
llvm-svn: 276411
debugserver jGetSharedCacheInfo packet instead of reading
the dyld internal data structures directly. This code is
(currently) only used for ios native lldb's - I should really
move this ObjectFileMachO::GetProcessSharedCacheUUID method
somewhere else, it makes less and less sense being in the
file reader.
<rdar://problem/25251243>
llvm-svn: 276369
Summary:
This patch fills in the implementation of GetMemoryRegions() on the Linux and Mac OS core file implementations of lldb_private::Process (ProcessElfCore::GetMemoryRegions and ProcessMachCore::GetMemoryRegions.) The GetMemoryRegions API was added under: http://reviews.llvm.org/D20565
The patch re-uses the m_core_range_infos list that was recently added to implement GetMemoryRegionInfo in both ProcessElfCore and ProcessMachCore to ensure the returned regions match the regions returned by Process::GetMemoryRegionInfo(addr_t load_addr, MemoryRegionInfo ®ion_info).
Reviewers: clayborg
Subscribers: labath, lldb-commits
Differential Revision: http://reviews.llvm.org/D21751
llvm-svn: 274741
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
os to "ios" or "macosx" if it is unspecified. For environments
where there genuinely is no os, we don't want to errantly
convert that to ios/macosx, e.g. bare board debugging.
Change PlatformRemoteiOS, PlatformRemoteAppleWatch, and
PlatformRemoteAppleTV to not create themselves if we have
an unspecified OS. Same problem - these are not appropriate
platforms for bare board debugging environments.
Have Process::Attach's logging take place if either
process or target logging is enabled.
<rdar://problem/25592378>
llvm-svn: 265732
rnb_err_t
RNBRemote::HandlePacket_stop_process (const char *p)
{
if (!DNBProcessInterrupt(m_ctx.ProcessID()))
HandlePacket_last_signal (NULL);
return rnb_success;
}
In the call to DNBProcessInterrupt we did:
nub_bool_t
DNBProcessInterrupt(nub_process_t pid)
{
MachProcessSP procSP;
if (GetProcessSP (pid, procSP))
return procSP->Interrupt();
return false;
}
This would always return false. It would cause HandlePacket_stop_process to always call "HandlePacket_last_signal (NULL);" which would send an extra stop reply packet _if_ the process is stopped. On a machine with enough cores, it would call DNBProcessInterrupt(...) and then HandlePacket_last_signal(NULL) so quickly that it will never send out an extra stop reply packet. But if the machine is slow enough or doesn't have enough cores, it could cause the call to HandlePacket_last_signal() to actually succeed and send an extra stop reply packet. This would cause problems up in GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse() where it would get the first stop reply packet and then possibly return or execute an async packet. If it returned, then the next packet that was sent will get the second stop reply as its response. If it executes an async packet, the async packet will get the wrong response.
To fix this I did the following:
1 - in debugserver, I fixed "bool MachProcess::Interrupt()" to return true if it sends the signal so we avoid sending the stop reply twice on slower machines
2 - Added a log line to RNBRemote::HandlePacket_stop_process() to say if we ever send an extra stop reply so we will see this in the darwin console output if this does happen
3 - Added response validators to StringExtractorGDBRemote so that we can verify some responses to some packets.
4 - Added validators to packets that often follow stop reply packets like the "m" packet for memory reads, JSON packets since "jThreadsInfo" is often sent immediately following a stop reply.
5 - Modified GDBRemoteCommunicationClient::SendPacketAndWaitForResponseNoLock() to validate responses. Any "StringExtractorGDBRemote &response" that contains a valid response verifier will verify the response and keep looking for correct responses up to 3 times. This will help us get back on track if we do get extra stop replies. If a StringExtractorGDBRemote does not have a response validator, it will accept any packet in response.
6 - In GDBRemoteCommunicationClient::SendPacketAndWaitForResponse we copy the response validator from the "response" argument over into m_async_response so that if we send the packet by interrupting the running process, we can validate the response we actually get in GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse()
7 - Modified GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse() to always check for an extra stop reply packet for 100ms when the process is interrupted. We were already doing this because we might interrupt a process with a \x03 packet, yet the process was in the process of stopping due to another reason. This race condition could cause an extra stop reply packet because the GDB remote protocol says if a \x03 packet is sent while the process is stopped, we should send a stop reply packet back. Now we always check for an extra stop reply packet when we manually interrupt a process.
The issue was showing up when our IDE would attempt to set a breakpoint while the process is running and this would happen:
--> \x03
<-- $T<stop reply 1>
--> z0,AAAAA,BB (set breakpoint)
<-- $T<stop reply 1> (incorrect extra stop reply packet)
--> c
<-- OK (response from z0 packet)
Now all packet traffic was off by one response. Since we now have a validator on the response for "z" packets, we do this:
--> \x03
<-- $T<stop reply 1>
--> z0,AAAAA,BB (set breakpoint)
<-- $T<stop reply 1> (Ignore this because this can't be the response to z0 packets)
<-- OK -- (we are back on track as this is a valid response to z0)
...
As time goes on we should add more packet validators.
<rdar://problem/22859505>
llvm-svn: 265086
to each other. This should remove some infrequent teardown crashes when the
listener is not the debugger's listener.
Processes now need to take a ListenerSP, not a Listener&.
This required changing over the Process plugin class constructors to take a ListenerSP, instead
of a Listener&. Other than that there should be no functional change.
<rdar://problem/24580184> CrashTracer: [USER] Xcode at …ework: lldb_private::Listener::BroadcasterWillDestruct + 39
llvm-svn: 262863
the xcode project file to catch switch statements that have a
case that falls through unintentionally.
Define LLVM_FALLTHROUGH to indicate instances where a case has code
and intends to fall through. This should be in llvm/Support/Compiler.h;
Peter Collingbourne originally checked in there (r237766), then
reverted (r237941) because he didn't have time to mark up all the
'case' statements that were intended to fall through. I put together
a patch to get this back in llvm http://reviews.llvm.org/D17063 but
it hasn't been approved in the past week. I added a new
lldb-private-defines.h to hold the definition for now.
Every place in lldb where there is a comment that the fall-through
is intentional, I added LLVM_FALLTHROUGH to silence the warning.
I haven't tried to identify whether the fallthrough is a bug or
not in the other places.
I haven't tried to add this to the cmake option build flags.
This warning will only work for clang.
This build cleanly (with some new warnings) on macosx with clang
under xcodebuild, but if this causes problems for people on other
configurations, I'll back it out.
llvm-svn: 260930
This is a packet which allows the remote gdb stub to ask for the address
of a symbol in the process. lldb sends the packet (offering to provide
addresses for symbol names) after every solib loaded. I changed lldb so
that once the stub has indicated that it doesn't need any more symbol
addresses, lldb will stop sending the qSymbol:: packet on new solib loads.
This can yield a performance benefit over slower communication links when
there are many solibs involved.
<rdar://problem/23310049>
llvm-svn: 257569
Summary:
Some debug servers don't support it so there's no point in spamming
this.
Reviewers: clayborg
Subscribers: fjricci, lldb-commits
Differential Revision: http://reviews.llvm.org/D15972
llvm-svn: 257116
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
They get treated as special RLE encoding symbols and packets get
corrupted. Most other packet types already know about this apparently,
but QEnvironment missed these two.
Should fix PR25300.
llvm-svn: 252521
Summary:
Gdb-remote's async thread sent out the eBroadcastBitRunPacketSent message *before* actually
sending out the continue packet. Since it's this message the actually triggers the public state
transition, it could happen (and it did happen in TestAttachResume, which does an "process
interrupt" right after a continue) that we attempt to stop the inferior before it was actually
started (which obviously did not end well). This fixes the problem by moving the broadcast after
the packet was actually sent.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14083
llvm-svn: 251399
disabled the use of the jThreadGetExtendedInfo packet which is used
to retrieve additional information about a thread, such as the QoS
setting for that thread on darwin systems.
Re-enable the use of the jThreadGetExtendedInfo packet, and add
some quick tests to the TestQueues mac test case which will verify
that we can retrieve the QoS names for these test threads.
<rdar://problem/22925096>
llvm-svn: 250364
Character with ASCII code 0 is incorrectly treated by LLDB as the end of
RSP packet. The left of the debugger server output is silently ignored.
Patch from evgeny.leviant@gmail.com
Reviewed by: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12523
llvm-svn: 247908
SUMMARY:
Refer to http://lists.llvm.org/pipermail/lldb-dev/2015-August/008024.html for discussion
on this topic. Bare-iron target like YAMON gdb-stub does not support qProcessInfo, qC,
qfThreadInfo, Hg and Hc packets. Reply from ? packet is as simple as S05. There is no
packet which gives us process or threads information. In such cases, assume pid=tid=1.
Reviewers: clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D12876
llvm-svn: 247773
code that looks for a second stop-reply packet in response to an
interrupt (control-c). This is to handle the case where where a
stop packet is making its way up to lldb right as lldb decides to
interrupt the inferior. If the inferior is running and we interrupt
it, we'd expect a T11 type response meaning that the inferior halted
because of the interrupt. But if the interrupt gets a T05 type
response instead, meaning that we stopped execution by hitting a
breakpoint or whatever, then the interrupt was received while the
inferior was already paused and so it is treated as a "?" packet
-- the remote stub will send the stop message a second time.
There's a timeout where we wait to get this second stop reply packet
in SendContinuePacketAndWaitForResponse, currently 1ms. For a slow
remote target, it may take longer than that to send the second stop
reply packet. If that happens, then lldb will use that second stop
reply packet as the response for the next packet request it makes
to the remote stub. The two will be out of sync by one packet for
the rest of the debug session and it's going to go badly from then on.
I've seen times as slow as 46ms, and given the severity of missing that
second stop reply packet, I'm increasing the timeout to 100ms, or 0.1sec.
<rdar://problem/21990791>
llvm-svn: 246004
SUMMARY:
The patch uses qfThreadID to get the thread IDs if qC packet is not supported by target.
Reviewers: jingham, clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D11519
llvm-svn: 244866
Adrian Prantl