This patch adds further support for vectorisation of loops that involve
selecting an integer value based on a previous comparison. Consider the
following C++ loop:
int r = a;
for (int i = 0; i < n; i++) {
if (src[i] > 3) {
r = b;
}
src[i] += 2;
}
We should be able to vectorise this loop because all we are doing is
selecting between two states - 'a' and 'b' - both of which are loop
invariant. This just involves building a vector of values that contain
either 'a' or 'b', where the final reduced value will be 'b' if any lane
contains 'b'.
The IR generated by clang typically looks like this:
%phi = phi i32 [ %a, %entry ], [ %phi.update, %for.body ]
...
%pred = icmp ugt i32 %val, i32 3
%phi.update = select i1 %pred, i32 %b, i32 %phi
We already detect min/max patterns, which also involve a select + cmp.
However, with the min/max patterns we are selecting loaded values (and
hence loop variant) in the loop. In addition we only support certain
cmp predicates. This patch adds a new pattern matching function
(isSelectCmpPattern) and new RecurKind enums - SelectICmp & SelectFCmp.
We only support selecting values that are integer and loop invariant,
however we can support any kind of compare - integer or float.
Tests have been added here:
Transforms/LoopVectorize/AArch64/sve-select-cmp.ll
Transforms/LoopVectorize/select-cmp-predicated.ll
Transforms/LoopVectorize/select-cmp.ll
Differential Revision: https://reviews.llvm.org/D108136
The expansion for these was updated in https://reviews.llvm.org/D47927 but the cost model was not adjusted.
I believe the cost model was also incorrect for the old expansion.
The expansion prior to D47927 used 3 icmps using LHS, RHS, and Result
to calculate theirs signs. Then 2 icmps to compare the signs. Followed
by an And. The previous cost model was using 3 icmps and 2 selects.
Digging back through git blame, those 2 selects in the cost model used to
be 2 icmps, but were changed in https://reviews.llvm.org/D90681
Differential Revision: https://reviews.llvm.org/D110739
getScalarizationOverhead() results in a somewhat better cost estimation than counting the insertion/extraction costs directly. Notably, this is still overestimating the costs.
Original Patch by: @lebedev.ri (Roman Lebedev)
Differential Revision: https://reviews.llvm.org/D110713
This reverts commit 8fdac7cb7a.
The issue causing the revert has been fixed a while ago in 60b852092c.
Original message:
Now that SCEVExpander can preserve LCSSA form,
we do not have to worry about LCSSA form when
trying to look through PHIs. SCEVExpander will take
care of inserting LCSSA PHI nodes as required.
This increases precision of the analysis in some cases.
Reviewed By: mkazantsev, bmahjour
Differential Revision: https://reviews.llvm.org/D71539
Update the costs to match the codegen from combineMulToPMADDWD - not only can we use PMADDWD is its zero-extended, but also if its a constant or sign-extended from a vXi16 (which can be replaced with a zero-extension).
As we're checking the cost debug analysis these should match the original IR line - so we shouldn't have any variable naming issues.
I'm investigating v4i32 mul -> PMADDDW costs handling (for PR47437) and these CHECK lines were proving tricky to keep track of
This patch fixes the crash found by PR51614:
whenever doing tail folding, interleave groups must be considered under mask.
Another fix D108900 follows for targets that support masked loads and stores:
when *deciding* to vectorize with masked interleave groups, check if the access
is reverse - which is currently not supported; rather than (only) asserting when
computing cost and generating code.
Differential Revision: https://reviews.llvm.org/D108891
In ValueTracking.cpp we use a function called
computeKnownBitsFromOperator to determine the known bits of a value.
For the vscale intrinsic if the function contains the vscale_range
attribute we can use the maximum and minimum values of vscale to
determine some known zero and one bits. This should help to improve
code quality by allowing certain optimisations to take place.
Tests added here:
Transforms/InstCombine/icmp-vscale.ll
Differential Revision: https://reviews.llvm.org/D109883
Mostly this fixes cases where !noalias or !alias.scope were passed
a scope rather than a scope list. In some cases I opted to drop
the metadata entirely instead, because it is not really relevant
to the test.
This extends the reduction logic in the vectorizer to handle intrinsic
versions of min and max, both the floating point variants already
created by instcombine under fastmath and the integer variants from
D98152.
As a bonus this allows us to match a chain of min or max operations into
a single reduction, similar to how add/mul/etc work.
Differential Revision: https://reviews.llvm.org/D109645
This is a first step towards addressing the last remaining limitation of
the VPlan version of sinkScalarOperands: the legacy version can
partially sink operands. For example, if a GEP has uniform users outside
the sink target block, then the legacy version will sink all scalar
GEPs, other than the one for lane 0.
This patch works towards addressing this case in the VPlan version by
detecting such cases and duplicating the sink candidate. All users
outside of the sink target will be updated to use the uniform clone.
Note that this highlights an issue with VPValue naming. If we duplicate
a replicate recipe, they will share the same underlying IR value and
both VPValues will have the same name ir<%gep>.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D104254
SCEV does not look through non-header PHIs inside the loop. Such phis
can be analyzed by adding separate accesses for each incoming pointer
value.
This results in 2 more loops vectorized in SPEC2000/186.crafty and
avoids regressions when sinking instructions before vectorizing.
Fixes PR50296, PR50288.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D102266
Users of VPValues are managed in a vector, so we need to be more
careful when iterating over users while updating them. For now, just
copy them.
Fixes 51798.
Currently, opaque pointers are supported in two forms: The
-force-opaque-pointers mode, where all pointers are opaque and
typed pointers do not exist. And as a simple ptr type that can
coexist with typed pointers.
This patch removes support for the mixed mode. You either get
typed pointers, or you get opaque pointers, but not both. In the
(current) default mode, using ptr is forbidden. In -opaque-pointers
mode, all pointers are opaque.
The motivation here is that the mixed mode introduces additional
issues that don't exist in fully opaque mode. D105155 is an example
of a design problem. Looking at D109259, it would probably need
additional work to support mixed mode (e.g. to generate GEPs for
typed base but opaque result). Mixed mode will also end up
inserting many casts between i8* and ptr, which would require
significant additional work to consistently avoid.
I don't think the mixed mode is particularly valuable, as it
doesn't align with our end goal. The only thing I've found it to
be moderately useful for is adding some opaque pointer tests in
between typed pointer tests, but I think we can live without that.
Differential Revision: https://reviews.llvm.org/D109290
For SVE, when scalarising the PHI instruction the whole vector part is
generated as opposed to creating instructions for each lane for fixed-
width vectors. However, in some cases the lane values may be needed
later (e.g for a load instruction) so we still need to calculate
these values to avoid extractelement being called on the vector part.
Differential Revision: https://reviews.llvm.org/D109445
Store the used element type in the InductionDescriptor. For typed
pointers, it remains the pointer element type. For opaque pointers,
we always use an i8 element type, such that the step is a simple
offset.
A previous version of this patch instead tried to guess the element
type from an induction GEP, but this is not reliable, as the GEP
may be hidden (see @both in iv_outside_user.ll).
Differential Revision: https://reviews.llvm.org/D104795
Reverted (manually due to merge conflicts) while regressions reported on PR51540 are investigated
As noticed on D106352, after we've folded "(select C, (gep Ptr, Idx), Ptr) -> (gep Ptr, (select C, Idx, 0))" if the inner Ptr was also a (now one use) gep we could then merge the geps, using the sum of the indices instead.
I've limited this to basic 2-op geps - a more general case further down InstCombinerImpl.visitGetElementPtrInst doesn't have the one-use limitation but only creates the add if it can be created via SimplifyAddInst.
https://alive2.llvm.org/ce/z/f8pLfD (Thanks Roman!)
Differential Revision: https://reviews.llvm.org/D106450
Adjusting the reduction recipes still relies on references to the
original IR, which can become outdated by the first-order recurrence
handling. Until reduction recipe construction does not require IR
references, move it before first-order recurrence handling, to prevent a
crash as exposed by D106653.
This reverts commit f4122398e7 to
investigate a crash exposed by it.
The patch breaks building the code below with `clang -O2 --target=aarch64-linux`
int a;
double b, c;
void d() {
for (; a; a++) {
b += c;
c = a;
}
}
I have added a new TTI interface called enableOrderedReductions() that
controls whether or not ordered reductions should be enabled for a
given target. By default this returns false, whereas for AArch64 it
returns true and we rely upon the cost model to make sensible
vectorisation choices. It is still possible to override the new TTI
interface by setting the command line flag:
-force-ordered-reductions=true|false
I have added a new RUN line to show that we use ordered reductions by
default for SVE and Neon:
Transforms/LoopVectorize/AArch64/strict-fadd.ll
Transforms/LoopVectorize/AArch64/scalable-strict-fadd.ll
Differential Revision: https://reviews.llvm.org/D106653
For tight loops like this:
float r = 0;
for (int i = 0; i < n; i++) {
r += a[i];
}
it's better not to vectorise at -O3 using fixed-width ordered reductions
on AArch64 targets. Although the resulting number of instructions in the
generated code ends up being comparable to not vectorising at all, there
may be additional costs on some CPUs, for example perhaps the scheduling
is worse. It makes sense to deter vectorisation in tight loops.
Differential Revision: https://reviews.llvm.org/D108292
Removed AArch64 usage of the getMaxVScale interface, replacing it with
the vscale_range(min, max) IR Attribute.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D106277
LoopLoadElimination, LoopVersioning and LoopVectorize currently
fetch MemorySSA when construction LoopAccessAnalysis. However,
LoopAccessAnalysis does not actually use MemorySSA and we can pass
nullptr instead.
This saves one MemorySSA calculation in the default pipeline, and
thus improves compile-time.
Differential Revision: https://reviews.llvm.org/D108074
Previously we emitted a "does not support scalable vectors"
remark for all targets whenever vectorisation is attempted. This
pollutes the output for architectures that don't support scalable
vectors and is likely confusing to the user.
Instead this patch introduces a debug message that reports when
scalable vectorisation is allowed by the target and only issues
the previous remark when scalable vectorisation is specifically
requested, for example:
#pragma clang loop vectorize_width(2, scalable)
Differential Revision: https://reviews.llvm.org/D108028
I have added RUN lines to both:
Transforms/LoopVectorize/AArch64/strict-fadd.ll
Transforms/LoopVectorize/AArch64/scalable-strict-fadd.ll
to show the default behaviour is to not vectorise when the following
flag is unset:
-force-ordered-reductions
This patch updates ConstantVector::getSplat to use poison instead
of undef when using insertelement/shufflevector to splat.
This follows on from D93793.
Differential Revision: https://reviews.llvm.org/D107751
Teach LV to use masked-store to support interleave-store-group with
gaps (instead of scatters/scalarization).
The symmetric case of using masked-load to support
interleaved-load-group with gaps was introduced a while ago, by
https://reviews.llvm.org/D53668; This patch completes the store-scenario
leftover from D53668, and solves PR50566.
Reviewed by: Ayal Zaks
Differential Revision: https://reviews.llvm.org/D104750
This patch adds more instructions to the Uniforms list, for example certain
intrinsics that are uniform by definition or whose operands are loop invariant.
This list includes:
1. The intrinsics 'experimental.noalias.scope.decl' and 'sideeffect', which
are always uniform by definition.
2. If intrinsics 'lifetime.start', 'lifetime.end' and 'assume' have
loop invariant input operands then these are also uniform too.
Also, in VPRecipeBuilder::handleReplication we check if an instruction is
uniform based purely on whether or not the instruction lives in the Uniforms
list. However, there are certain cases where calls to some intrinsics can
be effectively treated as uniform too. Therefore, we now also treat the
following cases as uniform for scalable vectors:
1. If the 'assume' intrinsic's operand is not loop invariant, then we
are free to treat this as uniform anyway since it's only a performance
hint. We will get the benefit for the first lane.
2. When the input pointers for 'lifetime.start' and 'lifetime.end' are loop
variant then for scalable vectors we assume these still ultimately come
from the broadcast of an alloca. We do not support scalable vectorisation
of loops containing alloca instructions, hence the alloca itself would
be invariant. If the pointer does not come from an alloca then the
intrinsic itself has no effect.
I have updated the assume test for fixed width, since we now treat it
as uniform:
Transforms/LoopVectorize/assume.ll
I've also added new scalable vectorisation tests for other intriniscs:
Transforms/LoopVectorize/scalable-assume.ll
Transforms/LoopVectorize/scalable-lifetime.ll
Transforms/LoopVectorize/scalable-noalias-scope-decl.ll
Differential Revision: https://reviews.llvm.org/D107284
Since all operands to ExtractValue must be loop-invariant when we deem
the loop vectorizable, we can consider ExtractValue to be uniform.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D107286
This patch adds more instructions to the Uniforms list, for example certain
intrinsics that are uniform by definition or whose operands are loop invariant.
This list includes:
1. The intrinsics 'experimental.noalias.scope.decl' and 'sideeffect', which
are always uniform by definition.
2. If intrinsics 'lifetime.start', 'lifetime.end' and 'assume' have
loop invariant input operands then these are also uniform too.
Also, in VPRecipeBuilder::handleReplication we check if an instruction is
uniform based purely on whether or not the instruction lives in the Uniforms
list. However, there are certain cases where calls to some intrinsics can
be effectively treated as uniform too. Therefore, we now also treat the
following cases as uniform for scalable vectors:
1. If the 'assume' intrinsic's operand is not loop invariant, then we
are free to treat this as uniform anyway since it's only a performance
hint. We will get the benefit for the first lane.
2. When the input pointers for 'lifetime.start' and 'lifetime.end' are loop
variant then for scalable vectors we assume these still ultimately come
from the broadcast of an alloca. We do not support scalable vectorisation
of loops containing alloca instructions, hence the alloca itself would
be invariant. If the pointer does not come from an alloca then the
intrinsic itself has no effect.
I have updated the assume test for fixed width, since we now treat it
as uniform:
Transforms/LoopVectorize/assume.ll
I've also added new scalable vectorisation tests for other intriniscs:
Transforms/LoopVectorize/scalable-assume.ll
Transforms/LoopVectorize/scalable-lifetime.ll
Transforms/LoopVectorize/scalable-noalias-scope-decl.ll
Differential Revision: https://reviews.llvm.org/D107284
The tests previously had lots of unnecessary CHECK lines, where
all we really need to check is the presence (or absence) of the
assume intrinsic and the correct input operands.
Differential Revision: https://reviews.llvm.org/D107157
This change wasn't strictly necessary for D106164 and could be removed.
This patch addresses the post-commit comments from @fhahn on D106164, and
also changes sve-widen-gep.ll to use the same IR test as shown in
pointer-induction.ll.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D106878
The two tests (@testloopvariant and @testbitcast) are actually
identical as in both loops the bitcast gets widened, forcing the
lifetime marker to be replicated using each lane of the input
vector.
Differential Revision: https://reviews.llvm.org/D107150
I'm renaming the flag because a future patch will add a new
enableOrderedReductions() TTI interface and so the meaning of this
flag will change to be one of forcing the target to enable/disable
them. Also, since other places in LoopVectorize.cpp use the word
'Ordered' instead of 'strict' I changed the flag to match.
Differential Revision: https://reviews.llvm.org/D107264
This patch updates VPInterleaveRecipe::print to print the actual defined
VPValues for load groups and the store VPValue operands for store
groups.
The IR references may become outdated while transforming the VPlan and
the defined and stored VPValues always are up-to-date.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D107223
If a reduction Phi has a single user which `AND`s the Phi with a type mask,
`lookThroughAnd` will return the user of the Phi and the narrower type represented
by the mask. Currently this is only used for arithmetic reductions, whereas loops
containing logical reductions will create a reduction intrinsic using the widened
type, for example:
for.body:
%phi = phi i32 [ %and, %for.body ], [ 255, %entry ]
%mask = and i32 %phi, 255
%gep = getelementptr inbounds i8, i8* %ptr, i32 %iv
%load = load i8, i8* %gep
%ext = zext i8 %load to i32
%and = and i32 %mask, %ext
...
^ this will generate an and reduction intrinsic such as the following:
call i32 @llvm.vector.reduce.and.v8i32(<8 x i32>...)
The same example for an add instruction would create an intrinsic of type i8:
call i8 @llvm.vector.reduce.add.v8i8(<8 x i8>...)
This patch changes AddReductionVar to call lookThroughAnd for other integer
reductions, allowing loops similar to the example above with reductions such
as and, or & xor to vectorize.
Reviewed By: david-arm, dmgreen
Differential Revision: https://reviews.llvm.org/D105632
This makes a couple of changes to the costing of MLA reduction patterns,
to more accurately cost various patterns that can come up from
vectorization.
- The Arm implementation of getExtendedAddReductionCost is altered to
only provide costs for legal or smaller types. Larger than legal types
need to be split, which currently does not work very well, especially
for predicated reductions where the predicate may be legal but needs to
be split. Currently we limit it to legal or smaller input types.
- The getReductionPatternCost has learnt that reduce(ext(mul(ext, ext))
is a pattern that can come up, and can be treated the same as
reduce(mul(ext, ext)) providing the extension types match.
- And it has been adjusted to not count the ext in reduce(mul(ext, ext))
as part of a reduce(mul) pattern.
Together these changes help to more accurately cost the mla reductions
in cases such as where the extend types don't match or the extend
opcodes are different, picking better vector factors that don't result
in expanded reductions.
Differential Revision: https://reviews.llvm.org/D106166
It was writing to the source directory (which may not be writeable),
rather than using %t.
Fixes: a5dd6c6cf9 ("[LoopVectorize] Don't interleave scalar ordered reductions for inner loops")
Consider the following loop:
void foo(float *dst, float *src, int N) {
for (int i = 0; i < N; i++) {
dst[i] = 0.0;
for (int j = 0; j < N; j++) {
dst[i] += src[(i * N) + j];
}
}
}
When we are not building with -Ofast we may attempt to vectorise the
inner loop using ordered reductions instead. In addition we also try
to select an appropriate interleave count for the inner loop. However,
when choosing a VF=1 the inner loop will be scalar and there is existing
code in selectInterleaveCount that limits the interleave count to 2
for reductions due to concerns about increasing the critical path.
For ordered reductions this problem is even worse due to the additional
data dependency, and so I've added code to simply disable interleaving
for scalar ordered reductions for now.
Test added here:
Transforms/LoopVectorize/AArch64/strict-fadd-vf1.ll
Differential Revision: https://reviews.llvm.org/D106646
The Exit instruction passed in for checking if it's an ordered reduction need not be
an FPAdd operation. We need to bail out at that point instead of
assuming it is an FPAdd (and hence has two operands). See added testcase.
It crashes without the patch because the Exit instruction is a phi with
exactly one operand.
This latent bug was exposed by 95346ba which added support for
multi-exit loops for vectorization.
Reviewed-By: kmclaughlin
Differential Revision: https://reviews.llvm.org/D106843
The loop vectorizer may decide to use tail folding when the trip-count
is low. When that happens, scalable VFs are no longer a candidate,
since tail folding/predication is not yet supported for scalable vectors.
This can be re-enabled in a future patch.
Reviewed By: kmclaughlin
Differential Revision: https://reviews.llvm.org/D106657
Before MASSV only supported P8 and P9 on AIX ans Linux . This patch proposes
MASSV to add support of P7 and P10 only on AIX too.
Differential: https://reviews.llvm.org/D106678
Invalid costs can be used to avoid vectorization with a given VF, which is
used for scalable vectors to avoid things that the code-generator cannot
handle. If we override the cost using the -force-target-instruction-cost
option of the LV, we would override this mechanism, rendering the flag useless.
This change ensures the cost is only overriden when the original cost that
was calculated is valid. That allows the flag to be used in combination
with the -scalable-vectorization option.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106677
This change moves most of `sve-inductions.ll` to non-AArch64 specific
LV tests using the `-target-supports-scalable-vectors` flag, because they're
not explicitly AArch64-specific. One test builds on AArch64-specific
knowledge regarding masked loads/stores, and remains in sve-inductions.ll.
Scalarization for scalable vectors is not (yet) supported, so the
LV discards a VF when scalarization is chosen as the widening
decision. It should therefore not assert that the VF is not scalable
when it computes the decision to scalarize.
The code can get here when both the interleave-cost, gather/scatter cost
and scalarization-cost are all illegal. This may e.g. happen for SVE
when the VF=1, to avoid generating `<vscale x 1 x eltty>` types that
the code-generator cannot yet handle.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106656
This fixes an issue that was found in D105199, where a GEP instruction
is used both as the address of a store, as well as the value of a store.
For the former, the value is scalar after vectorization, but the latter
(as value) requires widening.
Other code in that function seems to prevent similar cases from happening,
but it seems this case was missed.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106164
This reverts the revert commit b1777b04dc.
The patch originally got reverted due to a crash:
https://bugs.chromium.org/p/chromium/issues/detail?id=1232798#c2
The underlying issue was that we were not using the stored values from
the modified memory recipes, but the out-of-date values directly from
the IR (accessed via the VPlan). This should be fixed in d995d6376. A
reduced version of the reproducer has been added in 93664503be.
Add folds to instcombine to support the removal of select instruction when the masked_load is guaranteed to zero the same lanes, i.e. select(mask, mload(,,mask,0), 0) -> mload(,,mask,0).
Patch originally authored by @paulwalker-arm
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106376
I have added a new FastMathFlags parameter to getArithmeticReductionCost
to indicate what type of reduction we are performing:
1. Tree-wise. This is the typical fast-math reduction that involves
continually splitting a vector up into halves and adding each
half together until we get a scalar result. This is the default
behaviour for integers, whereas for floating point we only do this
if reassociation is allowed.
2. Ordered. This now allows us to estimate the cost of performing
a strict vector reduction by treating it as a series of scalar
operations in lane order. This is the case when FP reassociation
is not permitted. For scalable vectors this is more difficult
because at compile time we do not know how many lanes there are,
and so we use the worst case maximum vscale value.
I have also fixed getTypeBasedIntrinsicInstrCost to pass in the
FastMathFlags, which meant fixing up some X86 tests where we always
assumed the vector.reduce.fadd/mul intrinsics were 'fast'.
New tests have been added here:
Analysis/CostModel/AArch64/reduce-fadd.ll
Analysis/CostModel/AArch64/sve-intrinsics.ll
Transforms/LoopVectorize/AArch64/strict-fadd-cost.ll
Transforms/LoopVectorize/AArch64/sve-strict-fadd-cost.ll
Differential Revision: https://reviews.llvm.org/D105432
This patch avoids computing discounts for predicated instructions when the
VF is scalable.
There is no support for vectorization of loops with division because the
vectorizer cannot guarantee that zero divisions will not happen.
This loop now does not use VF scalable
```
for (long long i = 0; i < n; i++)
if (cond[i])
a[i] /= b[i];
```
Differential Revision: https://reviews.llvm.org/D101916
As noticed on D106352, after we've folded "(select C, (gep Ptr, Idx), Ptr) -> (gep Ptr, (select C, Idx, 0))" if the inner Ptr was also a (now one use) gep we could then merge the geps, using the sum of the indices instead.
I've limited this to basic 2-op geps - a more general case further down InstCombinerImpl.visitGetElementPtrInst doesn't have the one-use limitation but only creates the add if it can be created via SimplifyAddInst.
https://alive2.llvm.org/ce/z/f8pLfD (Thanks Roman!)
Differential Revision: https://reviews.llvm.org/D106450
If a reduction Phi has a single user which `AND`s the Phi with a type mask,
`lookThroughAnd` will return the user of the Phi and the narrower type represented
by the mask. Currently this is only used for arithmetic reductions, whereas loops
containing logical reductions will create a reduction intrinsic using the widened
type, for example:
for.body:
%phi = phi i32 [ %and, %for.body ], [ 255, %entry ]
%mask = and i32 %phi, 255
%gep = getelementptr inbounds i8, i8* %ptr, i32 %iv
%load = load i8, i8* %gep
%ext = zext i8 %load to i32
%and = and i32 %mask, %ext
...
^ this will generate an and reduction intrinsic such as the following:
call i32 @llvm.vector.reduce.and.v8i32(<8 x i32>...)
The same example for an add instruction would create an intrinsic of type i8:
call i8 @llvm.vector.reduce.add.v8i8(<8 x i8>...)
This patch changes AddReductionVar to call lookThroughAnd for other integer
reductions, allowing loops similar to the example above with reductions such
as and, or & xor to vectorize.
Reviewed By: david-arm, dmgreen
Differential Revision: https://reviews.llvm.org/D105632
This patch adds a VPFirstOrderRecurrencePHIRecipe, to further untangle
VPWidenPHIRecipe into distinct recipes for distinct use cases/lowering.
See D104989 for a new recipe for reduction phis.
This patch also introduces a new `FirstOrderRecurrenceSplice`
VPInstruction opcode, which is used to make the forming of the vector
recurrence value explicit in VPlan. This more accurately models def-uses
in VPlan and also simplifies code-generation. Now, the vector recurrence
values are created at the right place during VPlan-codegeneration,
rather than during post-VPlan fixups.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D105008
This fixes the lower and upper bound calculation of a
RuntimeCheckingPtrGroup when it has more than one loop
invariant pointers. Resolves PR50686.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D104148
This patch returns an Invalid cost from getInstructionCost() for alloca
instructions if the VF is scalable, as otherwise loops which contain
these instructions will crash when attempting to scalarize the alloca.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D105824
The original patch was:
https://reviews.llvm.org/D105806
There were some issues with undeterministic behaviour of the sorting
function, which led to scalable-call.ll passing and/or failing. This
patch fixes the issue by numbering all instructions in the array first,
and using that number as the order, which should provide a consistent
ordering.
This reverts commit a607f64118.
This change enables vectorization of multiple exit loops when the exit count is statically computable. That requirement - shared with the rest of LV - in turn requires each exit to be analyzeable and to dominate the latch.
The majority of work to support this was done in a set of previous patches. In particular,, 72314466 avoids having multiple edges from the middle block to the exits, and 4b33b2387 which added support for non-latch single exit and multiple exits with a single exiting block. As a result, this change is basically just removing a bailout and adjusting some tests now that the prerequisite work is done and has stuck in tree for a bit.
Differential Revision: https://reviews.llvm.org/D105817
The sort function for emitting an OptRemark was not deterministic,
which caused scalable-call.ll to fail on some buildbots. This patch
fixes that.
This patch also fixes an issue where `Instruction::comesBefore()`
is called when two Instructions are in different basic blocks,
which would otherwise cause an assertion failure.
This patch emits remarks for instructions that have invalid costs for
a given set of vectorization factors. Some example output:
t.c:4:19: remark: Instruction with invalid costs prevented vectorization at VF=(vscale x 1): load
dst[i] = sinf(src[i]);
^
t.c:4:14: remark: Instruction with invalid costs prevented vectorization at VF=(vscale x 1, vscale x 2, vscale x 4): call to llvm.sin.f32
dst[i] = sinf(src[i]);
^
t.c:4:12: remark: Instruction with invalid costs prevented vectorization at VF=(vscale x 1): store
dst[i] = sinf(src[i]);
^
Reviewed By: fhahn, kmclaughlin
Differential Revision: https://reviews.llvm.org/D105806
At the moment, <vscale x 1 x eltty> are not yet fully handled by the
code-generator, so to avoid vectorizing loops with that VF, we mark the
cost for these types as invalid.
The reason for not adding a new "TTI::getMinimumScalableVF" is because
the type is supposed to be a type that can be legalized. It partially is,
although the support for these types need some more work.
Reviewed By: paulwalker-arm, dmgreen
Differential Revision: https://reviews.llvm.org/D103882
Update (mainly) vXf32/vXf64 -> vXi8/vXi16 fptosi/fptoui costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
Revived D101297 in its original form + added some changes in X86
legalization cehcking for masked gathers.
This solution is the most stable and the most correct one. We have to
check the legality before trying to build the masked gather in SLP.
Without this check we have incorrect cost (for SLP) in case if the masked gather
is not legal/slower than the gather. And we're missing some
vectorization opportunities.
This can be fixed in the cost model, but in this case we need to add
special checks for the cost of GEPs for ScatterVectorize node, add
special check for small trees, etc., i.e. there are a lot of corner
cases here and there, which insrease code base and make it harder to
maintain the code.
> Can't we rely on cost model to deal with this? This can be profitable for futher vectorization, when we can start from such gather loads as seed.
The question from D101297. Actually, no, it can't. Actually, simple
gather may give us better result, especially after we started
vectorization of insertelements. Plus, like I said before, the cost for
non-legal masked gathers leads to missed vectorization opportunities.
Differential Revision: https://reviews.llvm.org/D105042
Resubmit after the following changes:
* Fix a latent bug related to unrolling with required epilogue (see e49d65f). I believe this is the cause of the prior PPC buildbot failure.
* Disable non-latch exits for epilogue vectorization to be safe (9ffa90d)
* Split out assert movement (600624a) to reduce churn if this gets reverted again.
Previous commit message (try 3)
Resubmit after fixing test/Transforms/LoopVectorize/ARM/mve-gather-scatter-tailpred.ll
Previous commit message...
This is a resubmit of 3e5ce4 (which was reverted by 7fe41ac). The original commit caused a PPC build bot failure we never really got to the bottom of. I can't reproduce the issue, and the bot owner was non-responsive. In the meantime, we stumbled across an issue which seems possibly related, and worked around a latent bug in 80e8025. My best guess is that the original patch exposed that latent issue at higher frequency, but it really is just a guess.
Original commit message follows...
If we know that the scalar epilogue is required to run, modify the CFG to end the middle block with an unconditional branch to scalar preheader. This is instead of a conditional branch to either the preheader or the exit block.
The motivation to do this is to support multiple exit blocks. Specifically, the current structure forces us to identify immediate dominators and *which* exit block to branch from in the middle terminator. For the multiple exit case - where we know require scalar will hold - these questions are ill formed.
This is the last change needed to support multiple exit loops, but since the diffs are already large enough, I'm going to land this, and then enable separately. You can think of this as being NFCIish prep work, but the changes are a bit too involved for me to feel comfortable tagging the review that way.
Differential Revision: https://reviews.llvm.org/D94892
This reverts commit 706bbfb35b.
The committed version moves the definition of VPReductionPHIRecipe out
of an ifdef only intended for ::print helpers. This should resolve the
build failures that caused the revert
This patch adds a TTI function, isElementTypeLegalForScalableVector, to query
whether it is possible to vectorize a given element type. This is called by
isLegalToVectorizeInstTypesForScalable to reject scalable vectorization if
any of the instruction types in the loop are unsupported, e.g:
int foo(__int128_t* ptr, int N)
#pragma clang loop vectorize_width(4, scalable)
for (int i=0; i<N; ++i)
ptr[i] = ptr[i] + 42;
This example currently crashes if we attempt to vectorize since i128 is not a
supported type for scalable vectorization.
Reviewed By: sdesmalen, david-arm
Differential Revision: https://reviews.llvm.org/D102253
This reverts commit 3fed6d443f,
bbcbf21ae6 and
6c3451cd76.
The changes causing build failures with certain configurations, e.g.
https://lab.llvm.org/buildbot/#/builders/67/builds/3365/steps/6/logs/stdio
lib/libLLVMVectorize.a(LoopVectorize.cpp.o): In function `llvm::VPRecipeBuilder::tryToCreateWidenRecipe(llvm::Instruction*, llvm::ArrayRef<llvm::VPValue*>, llvm::VFRange&, std::unique_ptr<llvm::VPlan, std::default_delete<llvm::VPlan> >&) [clone .localalias.8]':
LoopVectorize.cpp:(.text._ZN4llvm15VPRecipeBuilder22tryToCreateWidenRecipeEPNS_11InstructionENS_8ArrayRefIPNS_7VPValueEEERNS_7VFRangeERSt10unique_ptrINS_5VPlanESt14default_deleteISA_EE+0x63b): undefined reference to `vtable for llvm::VPReductionPHIRecipe'
collect2: error: ld returned 1 exit status
This patch is a first step towards splitting up VPWidenPHIRecipe into
separate recipes for the 3 distinct cases they model:
1. reduction phis,
2. first-order recurrence phis,
3. pointer induction phis.
This allows untangling the code generation and allows us to reduce the
reliance on LoopVectorizationCostModel during VPlan code generation.
Discussed/suggested in D100102, D100113, D104197.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D104989
Loads of <4 x i8> vectors were modeled as extremely expensive. And while we
don't have a load instruction that supports this, it isn't that expensive to
create a vector of i8 elements. The codegen for this was fixed/optimised in
D105110. This now tweaks the cost model and enables SLP vectorisation of my
motivating case loadi8.ll.
Differential Revision: https://reviews.llvm.org/D103629
Update v4i64 -> v4f32/v4f64 uitofp costs based on the worst case costs from the script in D103695.
Fixes a few regressions before we start adding AVX costs for legalized types.
If we unroll a loop in the vectorizer (without vectorizing), and the cost model requires a epilogue be generated for correctness, the code generation must actually do so.
The included test case on an unmodified opt will access memory one past the expected bound. As a result, this patch is fixing a latent miscompile.
Differential Revision: https://reviews.llvm.org/D103700
This patch fixes a crash when the target instruction for sinking is
dead. In that case, no recipe is created and trying to get the recipe
for it results in a crash. To ensure all sink targets are alive, find &
use the first previous alive instruction.
Note that the case where the sink source is dead is already handled.
Found by
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=35320
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D104603
Previously in setCostBasedWideningDecision if we encountered an
invariant store we just assumed that we could scalarize the store
and called getUniformMemOpCost to get the associated cost.
However, for scalable vectors this is not an option because it is
not currently possibly to scalarize the store. At the moment we
crash in VPReplicateRecipe::execute when trying to scalarize the
store.
Therefore, I have changed setCostBasedWideningDecision so that if
we are storing a scalable vector out to a uniform address and the
target supports scatter instructions, then we should use those
instead.
Tests have been added here:
Transforms/LoopVectorize/AArch64/sve-inv-store.ll
Differential Revision: https://reviews.llvm.org/D104624
Currently we will allow loops with a fixed width VF of 1 to vectorize
if the -enable-strict-reductions flag is set. However, the loop vectorizer
will not use ordered reductions if `VF.isScalar()` and the resulting
vectorized loop will be out of order.
This patch removes `VF.isVector()` when checking if ordered reductions
should be used. Also, instead of converting the FAdds to reductions if the
VF = 1, operands of the FAdds are changed such that the order is preserved.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D104533
Sinking scalar operands into predicated-triangle regions may allow
merging regions. This patch adds a VPlan-to-VPlan transform that tries
to merge predicate-triangle regions after sinking.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D100260
This patch updates VPWidenPHI recipes for first-order recurrences to
also track the incoming value from the back-edge. Similar to D99294,
which did the same for reductions.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D104197
A backedge-taken count doesn't refer to memory; returning a pointer type
is nonsense. So make sure we always return an integer.
The obvious way to do this would be to just convert the operands of the
icmp to integers, but that doesn't quite work out at the moment:
isLoopEntryGuardedByCond currently gets confused by ptrtoint operations.
So we perform the ptrtoint conversion late for lt/gt operations.
The test changes are mostly innocuous. The most interesting changes are
more complex SCEV expressions of the form "(-1 * (ptrtoint i8* %ptr to
i64)) + %ptr)". This is expected: we can't fold this to zero because we
need to preserve the pointer base.
The call to isLoopEntryGuardedByCond in howFarToZero is less precise
because of ptrtoint operations; this shows up in the function
pr46786_c26_char in ptrtoint.ll. Fixing it here would require more
complex refactoring. It should eventually be fixed by future
improvements to isImpliedCond.
See https://bugs.llvm.org/show_bug.cgi?id=46786 for context.
Differential Revision: https://reviews.llvm.org/D103656
This can be seen as a follow up to commit 0ee439b705,
that changed the second argument of __powidf2, __powisf2 and
__powitf2 in compiler-rt from si_int to int. That was to align with
how those runtimes are defined in libgcc.
One thing that seem to have been missing in that patch was to make
sure that the rest of LLVM also handle that the argument now depends
on the size of int (not using the si_int machine mode for 32-bit).
When using __builtin_powi for a target with 16-bit int clang crashed.
And when emitting libcalls to those rtlib functions, typically when
lowering @llvm.powi), the backend would always prepare the exponent
argument as an i32 which caused miscompiles when the rtlib was
compiled with 16-bit int.
The solution used here is to use an overloaded type for the second
argument in @llvm.powi. This way clang can use the "correct" type
when lowering __builtin_powi, and then later when emitting the libcall
it is assumed that the type used in @llvm.powi matches the rtlib
function.
One thing that needed some extra attention was that when vectorizing
calls several passes did not support that several arguments could
be overloaded in the intrinsics. This patch allows overload of a
scalar operand by adding hasVectorInstrinsicOverloadedScalarOpd, with
an entry for powi.
Differential Revision: https://reviews.llvm.org/D99439
As noted in https://bugs.llvm.org/show_bug.cgi?id=46666, the current behavior of assuming if-conversion safety if a loop is annotated parallel (`!llvm.loop.parallel_accesses`), is not expectable, the documentation for this behavior was since removed from the LangRef again, and can lead to invalid reads.
This was observed in POCL (https://github.com/pocl/pocl/issues/757) and would require similar workarounds in current work at hipSYCL.
The question remains why this was initially added and what the implications of removing this optimization would be.
Do we need an alternative mechanism to propagate the information about legality of if-conversion?
Or is the idea that conditional loads in `#pragma clang loop vectorize(assume_safety)` can be executed unmasked without additional checks flawed in general?
I think this implication is not part of what a user of that pragma (and corresponding metadata) would expect and thus dangerous.
Only two additional tests failed, which are adapted in this patch. Depending on the further direction force-ifcvt.ll should be removed or further adapted.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D103907
Fixes getTypeConversion to return `TypeScalarizeScalableVector` when a scalable vector
type cannot be legalized by widening/splitting. When this is the method of legalization
found, getTypeLegalizationCost will return an Invalid cost.
The getMemoryOpCost, getMaskedMemoryOpCost & getGatherScatterOpCost functions already call
getTypeLegalizationCost and will now also return an Invalid cost for unsupported types.
Reviewed By: sdesmalen, david-arm
Differential Revision: https://reviews.llvm.org/D102515
If the `-enable-strict-reductions` flag is set to true, then currently we will
always choose to vectorize the loop with strict in-order reductions. This is
not necessary where we allow the reordering of FP operations, such as
when loop hints are passed via metadata.
This patch moves useOrderedReductions so that we can also check whether
loop hints allow reordering, in which case we should use the default
behaviour of vectorizing with unordered reductions.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D103814
Noticed via code inspection. We changed the semantics of the IR when we added mustprogress, and we appear to have not updated this location.
Differential Revision: https://reviews.llvm.org/D103834
The non-DOT printing does not include the successors of VPregionBlocks.
This patch use the same style for printing successors as for
VPBasicBlock.
I think the printing of successors could be a bit improved further, as
at the moment it is hard to ensure a check line matches all successors.
But that can be done as follow-up.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D103515
This patch marks the induction increment of the main induction variable
of the vector loop as NUW when not folding the tail.
If the tail is not folded, we know that End - Start >= Step (either
statically or through the minimum iteration checks). We also know that both
Start % Step == 0 and End % Step == 0. We exit the vector loop if %IV +
%Step == %End. Hence we must exit the loop before %IV + %Step unsigned
overflows and we can mark the induction increment as NUW.
This should make SCEV return more precise bounds for the created vector
loops, used by later optimizations, like late unrolling.
At the moment quite a few tests still need to be updated, but before
doing so I'd like to get initial feedback to make sure I am not missing
anything.
Note that this could probably be further improved by using information
from the original IV.
Attempt of modeling of the assumption in Alive2:
https://alive2.llvm.org/ce/z/H_DL_g
Part of a set of fixes required for PR50412.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D103255
This patch uses the calculated maximum scalable VFs to build VPlans,
cost them and select a suitable scalable VF.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D98722
Update isFirstOrderRecurrence to explore all uses of a recurrence phi
and check if we can sink them. If there are multiple users to sink, they
are all mapped to the previous instruction.
Fixes PR44286 (and another PR or two).
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D84951
This is a patch that replaces shufflevector and insertelement's placeholder value with poison.
Underlying motivation is to fix the semantics of shufflevector with undef mask to return poison instead
(D93818)
The consensus has been made in the late 2020 via mailing list as well as the thread in https://bugs.llvm.org/show_bug.cgi?id=44185 .
This patch is a simple syntactic change to the existing code, hence directly pushed as a commit.
This reverts commit 1ed7f8ede5.
This change can cause loop-distribute to crash in some cases. Revert
until I have more time to wrap up a fix.
See PR50296, PR5028 and D102266.
For uniform ReplicateRecipes, only the first lane should be used, so
sinking them would mean we have to compute the value of the first lane
multiple times. Also, at the moment, sinking them causes a crash because
the value of the first lane is re-used by all users.
Reported post-commit for D100258.
When loop hints are passed via metadata, the allowReordering function
in LoopVectorizationLegality will allow the order of floating point
operations to be changed:
bool allowReordering() const {
// When enabling loop hints are provided we allow the vectorizer to change
// the order of operations that is given by the scalar loop. This is not
// enabled by default because can be unsafe or inefficient.
The -enable-strict-reductions flag introduced in D98435 will currently only
vectorize reductions in-loop if hints are used, since canVectorizeFPMath()
will return false if reordering is not allowed.
This patch changes canVectorizeFPMath() to query whether it is safe to
vectorize the loop with ordered reductions if no hints are used. For
testing purposes, an additional flag (-hints-allow-reordering) has been
added to disable the reordering behaviour described above.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D101836
An additional RUN line has been added to both strict-fadd.ll &
scalable-strict-fadd.ll to ensure the correct behaviour of these
tests where `-enable-strict-reductions` is false.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D103015
This patch adds a first VPlan-based implementation of sinking of scalar
operands.
The current version traverse a VPlan once and processes all operands of
a predicated REPLICATE recipe. If one of those operands can be sunk,
it is moved to the block containing the predicated REPLICATE recipe.
Continue with processing the operands of the sunk recipe.
The initial version does not re-process candidates after other recipes
have been sunk. It also cannot partially sink induction increments at
the moment. The VPlan only contains WIDEN-INDUCTION recipes and if the
induction is used for example in a GEP, only the first lane is used and
in the lowered IR the adds for the other lanes can be sunk into the
predicated blocks.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D100258
* Removes unnecessary loop hints.
* Use RUN line with '-scalable-vectorization=preferred' instead of 'on'
for the maximize-bandwidth behaviour. This prepares the test for enabling
scalable vectorization; With a forced instruction-cost of 1, 'on' will
always favour fixed-width VF to be chosen, whereas with 'preferred'
we can check that the maximize-bandwidth option in combination with
scalable-vectorization=preferred actually picks a scalable VF.
* Renamed to scalable-vectorization.ll, because a follow-up patch will
test more than just analysis.
This patch adds a new option to the LoopVectorizer to control how
scalable vectors can be used.
Initially, this suggests three levels to control scalable
vectorization, although other more aggressive options can be added in
the future.
The possible options are:
- Disabled: Disables vectorization with scalable vectors.
- Enabled: Vectorize loops using scalable vectors or fixed-width
vectors, but favors fixed-width vectors when the cost
is a tie.
- Preferred: Like 'Enabled', but favoring scalable vectors when the
cost-model is inconclusive.
Reviewed By: paulwalker-arm, vkmr
Differential Revision: https://reviews.llvm.org/D101945
This patch introduces a new class, MaxVFCandidates, that holds the
maximum vectorization factors that have been computed for both scalable
and fixed-width vectors.
This patch is intended to be NFC for fixed-width vectors, although
considering a scalable max VF (which is disabled by default) pessimises
tail-loop elimination, since it can no longer determine if any chosen VF
(less than fixed/scalable MaxVFs) is guaranteed to handle all vector
iterations if the trip-count is known. This issue will be addressed in
a future patch.
Reviewed By: fhahn, david-arm
Differential Revision: https://reviews.llvm.org/D98721
This reverts commit 6d3e3ae8a9.
Still seeing PPC build bot failures, and one arm self host bot failing. I'm officially stumped, and need help from a bot owner to reduce.
Resubmit after fixing test/Transforms/LoopVectorize/ARM/mve-gather-scatter-tailpred.ll
Previous commit message...
This is a resubmit of 3e5ce4 (which was reverted by 7fe41ac). The original commit caused a PPC build bot failure we never really got to the bottom of. I can't reproduce the issue, and the bot owner was non-responsive. In the meantime, we stumbled across an issue which seems possibly related, and worked around a latent bug in 80e8025. My best guess is that the original patch exposed that latent issue at higher frequency, but it really is just a guess.
Original commit message follows...
If we know that the scalar epilogue is required to run, modify the CFG to end the middle block with an unconditional branch to scalar preheader. This is instead of a conditional branch to either the preheader or the exit block.
The motivation to do this is to support multiple exit blocks. Specifically, the current structure forces us to identify immediate dominators and *which* exit block to branch from in the middle terminator. For the multiple exit case - where we know require scalar will hold - these questions are ill formed.
This is the last change needed to support multiple exit loops, but since the diffs are already large enough, I'm going to land this, and then enable separately. You can think of this as being NFCIish prep work, but the changes are a bit too involved for me to feel comfortable tagging the review that way.
Differential Revision: https://reviews.llvm.org/D94892
This is a resubmit of 3e5ce4 (which was reverted by 7fe41ac). The original commit caused a PPC build bot failure we never really got to the bottom of. I can't reproduce the issue, and the bot owner was non-responsive. In the meantime, we stumbled across an issue which seems possibly related, and worked around a latent bug in 80e8025. My best guess is that the original patch exposed that latent issue at higher frequency, but it really is just a guess.
Original commit message follows...
If we know that the scalar epilogue is required to run, modify the CFG to end the middle block with an unconditional branch to scalar preheader. This is instead of a conditional branch to either the preheader or the exit block.
The motivation to do this is to support multiple exit blocks. Specifically, the current structure forces us to identify immediate dominators and *which* exit block to branch from in the middle terminator. For the multiple exit case - where we know require scalar will hold - these questions are ill formed.
This is the last change needed to support multiple exit loops, but since the diffs are already large enough, I'm going to land this, and then enable separately. You can think of this as being NFCIish prep work, but the changes are a bit too involved for me to feel comfortable tagging the review that way.
Differential Revision: https://reviews.llvm.org/D94892
In InnerLoopVectorizer::widenPHIInstruction there are cases where we have
to scalarise a pointer induction variable after vectorisation. For scalable
vectors we already deal with the case where the pointer induction variable
is uniform, but we currently crash if not uniform. For fixed width vectors
we calculate every lane of the scalarised pointer induction variable for a
given VF, however this cannot work for scalable vectors. In this case I
have added support for caching the whole vector value for each unrolled
part so that we can always extract an arbitrary element. Additionally, we
still continue to cache the known minimum number of lanes too in order
to improve code quality by avoiding an extractelement operation.
I have adapted an existing test `pointer_iv_mixed` from the file:
Transforms/LoopVectorize/consecutive-ptr-uniforms.ll
and added it here for scalable vectors instead:
Transforms/LoopVectorize/AArch64/sve-widen-phi.ll
Differential Revision: https://reviews.llvm.org/D101294
If the simplified VPValue is a recipe, we need to register it for Instr,
in case it needs to be recorded. The way this is handled in general may
change soon, following some post-commit comments.
This fixes PR50298.
This patch adds support for Darwin's libsystem math vector functions to
TLI. Darwin's libsystem provides a range of vector functions for libm
functions.
This initial patch only adds the 2 x double and 4 x float versions,
which are available on both X86 and ARM64. On X86, wider vector versions
are supported as well.
Reviewed By: jroelofs
Differential Revision: https://reviews.llvm.org/D101856
The function fixReduction used to assert/crash for scalable vector when
a vector reduce could be done with a smaller vector.
This patch removes this assertion as it is safe to use scalable vector for
vector reduce and truncate.
Differential Revision: https://reviews.llvm.org/D101260
The loop vectorizer will currently assume a large trip count when
calculating which of several vectorization factors are more profitable.
That is often not a terrible assumption to make as small trip count
loops will usually have been fully unrolled. There are cases however
where we will try to vectorize them, and especially when folding the
tail by masking can incorrectly choose to vectorize loops that are not
beneficial, due to the folded tail rounding the iteration count up for
the vectorized loop.
The motivating example here has a trip count of 5, so either performs 5
scalar iterations or 2 vector iterations (with VF=4). At a high enough
trip count the vectorization becomes profitable, but the rounding up to
2 vector iterations vs only 5 scalar makes it unprofitable.
This adds an alternative cost calculation when we know the max trip
count and are folding tail by masking, rounding the iteration count up
to the correct number for the vector width. We still do not account for
anything like setup cost or the mixture of vector and scalar loops, but
this is at least an improvement in a few cases that we have had
reported.
Differential Revision: https://reviews.llvm.org/D101726
Adds support for scalable vectorization of loops containing first-order recurrences, e.g:
```
for(int i = 0; i < n; i++)
b[i] = a[i] + a[i - 1]
```
This patch changes fixFirstOrderRecurrence for scalable vectors to take vscale into
account when inserting into and extracting from the last lane of a vector.
CreateVectorSplice has been added to construct a vector for the recurrence, which
returns a splice intrinsic for scalable types. For fixed-width the behaviour
remains unchanged as CreateVectorSplice will return a shufflevector instead.
The tests included here are the same as test/Transform/LoopVectorize/first-order-recurrence.ll
Reviewed By: david-arm, fhahn
Differential Revision: https://reviews.llvm.org/D101076
This is a patch that disables the poison-unsafe select -> and/or i1 folding.
It has been blocking D72396 and also has been the source of a few miscompilations
described in llvm.org/pr49688 .
D99674 conditionally blocked this folding and successfully fixed the latter one.
The former one was still blocked, and this patch addresses it.
Note that a few test functions that has `_logical` suffix are now deoptimized.
These are created by @nikic to check the impact of disabling this optimization
by copying existing original functions and replacing and/or with select.
I can see that most of these are poison-unsafe; they can be revived by introducing
freeze instruction. I left comments at fcmp + select optimizations (or-fcmp.ll, and-fcmp.ll)
because I think they are good targets for freeze fix.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D101191
Krasimir Georgiev