Refactor DIExpression::With* into a flag enum in order to be less
error-prone to use (as discussed on D60866).
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D61943
llvm-svn: 361137
Same as what we do for vector reductions in combineHorizontalPredicateResult, use movmsk+cmp for scalar (and(extract(x,0),extract(x,1)) reduction patterns.
llvm-svn: 361052
This can be used to create references among sections. When --gc-sections
is used, the referenced section will be retained if the origin section
is retained.
See R_MIPS_NONE (D13659), R_ARM_NONE (D61992), R_AARCH64_NONE (D61973) for similar changes.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D62014
llvm-svn: 360983
These are valid Jcc, but aren't based on the EFLAGS condition codes (Intel 64
and IA-32 Architetcures Software Developer's Manual Vol. 1, Appendix B). These
are covered in clang/test, but not llvm/test.
llvm-svn: 360960
In Intel syntax, it's not uncommon to see a "short" modifier on Jcc conditional
jumps, which indicates the offset should be a "short jump" (8-bit immediate
offset from EIP, -128 to +127). This patch expands to all recognized Jcc
condition codes, and removes the inline restriction.
Clang already ignores "jmp short" in inline assembly. However, only "jmp" and a
couple of Jcc are actually checked, and only inline (i.e., not when using the
integrated assembler for asm sources). A quick search through asm-containing
libraries at hand shows a pretty broad range of Jcc conditions spelled with
"short."
GAS ignores the "short" modifier, and instead uses an encoding based on the
given immediate. MS inline seems to do the same, and I suspect MASM does, too.
NASM will yield an error if presented with an out-of-range immediate value.
Example of GCC 9.1 and MSVC v19.20, "jmp short" with offsets that do and do not
fit within 8 bits: https://gcc.godbolt.org/z/aFZmjY
Differential Revision: https://reviews.llvm.org/D61990
llvm-svn: 360954
This better matches the verbiage in Intel documentation, and should help avoid
confusion between these two different kinds of values, both of which are parsed
from mnemonics.
llvm-svn: 360953
Summary:
This refactors four pieces of code that create SDNodes for references to
symbols:
- normal global address lowering (LEA, MOV, etc)
- callee global address lowering (CALL)
- external symbol address lowering (LEA, MOV, etc)
- external symbol address lowering (CALL)
Each of these pieces of code need to:
- classify the reference
- lower the symbol
- emit a RIP wrapper if needed
- emit a load if needed
- add offsets if needed
I think handling them all in one place will make the code easier to
maintain in the future.
Reviewers: craig.topper, RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61690
llvm-svn: 360952
This suppresses exceptions which is what we should be doing for ceil and floor. We already use the correct immediate
in patterns without masking.
llvm-svn: 360915
This patch add the ISD::LROUND and ISD::LLROUND along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lround/llround generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
llvm-svn: 360889
If we're trying to match an LEA, its possible the LEA match will be deemed unprofitable. In which case the negation we created in matchAddress would be left dangling in the SelectionDAG. This could artificially increase use counts for other nodes in the DAG. Though I don't have an example of that. But it just seems like bad form to have dangling nodes in isel.
Differential Revision: https://reviews.llvm.org/D61047
llvm-svn: 360823
These particular instructions only operate on 128-bit vectors and have no wider equivalents. And the
element size is always known.
One could argue that MOVSS/MOVSD could be merged, but that's probably disruptive to code in
X86ISelLowering and probably low value.
llvm-svn: 360815
They encode the same way, but OR32mi8Locked sets hasUnmodeledSideEffects set
which should be stronger than the mayLoad/mayStore on LOCK_OR32mi8. I think
this makes sense since we are using it as a fence.
This also seems to hide the operation from the speculative load hardening pass
so I've reverted r360511.
llvm-svn: 360747
Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes a layering problem.
llvm-svn: 360736
This was the portion split off D58632 so that it could follow the redzone API cleanup. Note that I changed the offset preferred from -8 to -64. The difference should be very minor, but I thought it might help address one concern which had been previously raised.
Differential Revision: https://reviews.llvm.org/D61862
llvm-svn: 360719
D61068 handled vector shifts, this patch does the same for scalars where there are similar number of pipes for shifts as bit ops - this is true almost entirely for AMD targets where the scalar ALUs are well balanced.
This combine avoids AND immediate mask which usually means we reduce encoding size.
Some tests show use of (slow, scaled) LEA instead of SHL in some cases, but thats due to particular shift immediates - shift+mask generate these just as easily.
Differential Revision: https://reviews.llvm.org/D61830
llvm-svn: 360684
This is a follow on to D58632, with the same logic. Given a memory operation which needs ordering, but doesn't need to modify any particular address, prefer to use a locked stack op over an mfence.
Differential Revision: https://reviews.llvm.org/D61863
llvm-svn: 360649
Returning SDValue() makes the caller think that nothing happened and it will
end up executing the Expand path. This generates extra nodes that will need to
be pruned as dead code.
Returning an ISD::MERGE_VALUES will tell the caller that we'd like to make a
change and it will take care of replacing uses. This will prevent falling into
the Expand path.
llvm-svn: 360627
These are updates to match how isel table would emit a LOCK_OR32mi8 node.
-Use i32 for the immediate zero even though only 8 bits are encoded.
-Use i16 for segment register.
-Use LOCK_OR32mi8 for idempotent atomic operations in 32-bit mode to match
64-bit mode. I'm not sure why OR32mi8Locked and LOCK_OR32mi8 both exist. The
only difference seems to be that OR32mi8Locked is marked as UnmodeledSideEffects=1.
-Emit an extra i32 result for the flags output.
I don't know if the types here really matter just noticed it was inconsistent
with normal behavior.
llvm-svn: 360619
Summary:
X86TargetLowering::LowerAsmOperandForConstraint had better support than
TargetLowering::LowerAsmOperandForConstraint for arbitrary depth
getelementpointers for "i", "n", and "s" extended inline assembly
constraints. Hoist its support from the derived class into the base
class.
Link: https://github.com/ClangBuiltLinux/linux/issues/469
Reviewers: echristo, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, E5ten, kees, jyknight, nemanjai, javed.absar, eraman, hiraditya, jsji, llvm-commits, void, craig.topper, nathanchance, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61560
llvm-svn: 360604
Fixes the regression noted in D61782 where a VZEXT_MOVL was being inserted because we weren't discriminating between 'zeroable' and 'all undef' for the upper elts.
Differential Revision: https://reviews.llvm.org/D61782
llvm-svn: 360596
Now that we can use HADD/SUB for scalar additions from any pair of extracted elements (D61263), we can relax the one use limit as we will be able to merge multiple uses into using the same HADD/SUB op.
This exposes a couple of missed opportunities in LowerBuildVectorv4x32 which will be committed separately.
Differential Revision: https://reviews.llvm.org/D61782
llvm-svn: 360594
I've included a new fix in X86RegisterInfo to prevent PR41619 without
reintroducing r359392. We might be able to improve that in the base class
implementation of shouldRewriteCopySrc somehow. But this hopefully enables
forward progress on SimplifyDemandedBits improvements for now.
Original commit message:
This patch adds support for BigBitWidth -> SmallBitWidth bitcasts, splitting the DemandedBits/Elts accordingly.
The AMDGPU backend needed an extra (srl (and x, c1 << c2), c2) -> (and (srl(x, c2), c1) combine to encourage BFE creation, I investigated putting this in DAGComb
but it caused a lot of noise on other targets - some improvements, some regressions.
The X86 changes are all definite wins.
llvm-svn: 360552
See if we can simplify the demanded vector elts from the extraction before trying to simplify the demanded bits.
This helps us with target shuffles and hops in particular.
llvm-svn: 360535
The original costs stopped at SSE42, I've added conservative estimates for everything down to SSE1/SSE2 and moved some of the SSE42 costs to SSE41 (really only the addition of PCMPGT makes any difference).
I've also added missing vXi8 costs (we use PHMINPOSUW for i8/i16 for scarily quick results) and 256-bit vector costs for AVX1.
llvm-svn: 360528
For some targets, there is a circular dependency between InstPrinter and
MCTargetDesc. Merging them together will fix this. For the other targets,
the merging is to maintain consistency so all targets will have the same
structure.
llvm-svn: 360484
As requested in D58632, cleanup our red zone detection logic in the X86 backend. The existing X86MachineFunctionInfo flag is used to track whether we *use* the redzone (via a particularly optimization?), but there's no common way to check whether the function *has* a red zone.
I'd appreciate careful review of the uses being updated. I think they are NFC, but a careful eye from someone else would be appreciated.
Differential Revision: https://reviews.llvm.org/D61799
llvm-svn: 360479
After D58632, we can create idempotent atomic operations to the top of stack.
This confused speculative load hardening because it thinks accesses should have
virtual register base except for the cases it already excluded.
This commit adds a new exclusion for this case. I'll try to reduce a test case
for this, but this fix was verified to work by the reporter. This should avoid
needing to revert D58632.
llvm-svn: 360475
Summary: Skip over prefetches when assigning debug info to instructions with memory operands. This way, the debug info is stable after instrumenting a binary with prefetches, allowing for iterative profiling and instrumentation.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61789
llvm-svn: 360471
Fixes https://bugs.llvm.org/show_bug.cgi?id=40969
The functions findPotentiallyBlockedCopies and buildCopy are currently not
accounting for the presence of debug instructions. In the former this results
in the optimization not being trigerred, and in the latter results in
inconsistent codegen.
This patch enables the optimization to be performed in a debug build and
ensures the codegen is consistent with non-debug builds.
Patch by Chris Dawson.
Differential Revision: https://reviews.llvm.org/D61680
llvm-svn: 360436
If we only use the lower xmm of a ymm hop, then extract the xmm's (for free), perform the xmm hop and then insert back into a ymm (for free).
Fixes some of the regressions noted in D61782
llvm-svn: 360435
Petar Jovanovic