I stumbled onto a case where our (sext_inreg (assertzexti32 (fptoui X)), i32)
isel pattern can cause an fcvt.wu and fcvt.lu to be emitted if
the assertzexti32 has an additional user. If we add a one use check
it would just cause a fcvt.lu followed by a sext.w when only need
a fcvt.wu to satisfy both users.
To mitigate this I've added custom isel and new ISD opcodes for
fcvt.wu. This allows us to keep know it started life as a conversion
to i32 without needing to match multiple nodes. ComputeNumSignBits
has been taught that this new nodes produces 33 sign bits. To
prevent regressions when we need to zero extend the result of an
(i32 (fptoui X)), I've added a DAG combine to convert it to an
(i64 (fptoui X)) before type legalization. In most cases this would
happen in InstCombine, but a zero_extend can be created for function
returns or arguments.
To keep everything consistent I've added new nodes for fptosi as well.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D106346
This adds a DAG combine to detect sext/zext inputs and emit a
new ISD opcode. The extends will either be removed or replaced
with narrower extends.
Isel patterns are used to match add and widening mul to vwmacc
similar to the recently added vmacc patterns.
There's still some work to be to match vmulsu.
We should also rewrite splats that were extended as scalars and
then splatted.
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D104802
It seems it is possible for DAG combine to create a shl with an
i64 result type and an i32 shift amount. This is ok before type
legalization since the type don't need to match in SelectionDAG.
This results in type legalization calling LowerOperation to
legalize just the amount. We weren't expecting this so we
asserted for not finding a fixed vector shift.
To fix this, I've added a check for the fixed vector case and
returned SDValue() to get the default type legalizer. I've
factored all shifts together and added a fixed vector specific
handler to avoid repeating similar code for each in
LowerOperation.
The particular case I found was exposed by D104581, but the bad
shift is created after that patch triggers.
This patch adds support for loading and storing unaligned vectors via an
equivalently-sized i8 vector type, which has support in the RVV
specification for byte-aligned access.
This offers a more optimal path for handling of unaligned fixed-length
vector accesses, which are currently scalarized. It also prevents
crashing when `LegalizeDAG` sees an unaligned scalable-vector load/store
operation.
Future work could be to investigate loading/storing via the largest
vector element type for the given alignment, in case that would be more
optimal on hardware. For instance, a 4-byte-aligned nxv2i64 vector load
could loaded as nxv4i32 instead of as nxv16i8.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104032
Don't require a specific kind of IRBuilder for TargetLowering hooks.
This allows us to drop the IRBuilder.h include from TargetLowering.h.
Differential Revision: https://reviews.llvm.org/D103759
This patch extends the RISC-V lowering of the 'fastcc' calling
convention to vector types, both fixed-length and scalable. Without this
patch, any function passing or returning vector types by value would
throw a compiler error.
Vectors are handled in 'fastcc' much as they are in the default calling
convention, the noticeable difference being the extended set of scalar
GPR registers that can be used to pass vectors indirectly.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D102505
This patch adds a way for the target to configure the type it uses for
the explicit vector length operands of VP SDNodes. The type must be a
legal integer type (there is still no target-independent legalization of
this operand) and must currently be at least as big as i32, the type
used by the IR intrinsics. An implicit zero-extension takes place on
targets which choose a larger type. All VP nodes should be created with
this type used for the EVL operand.
This allows 64-bit RISC-V to avoid custom legalization of all VP nodes,
keeping them in their target-independent form for that bit longer.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D103027
SEW=64 shifts only uses the log2(64) bits of shift amount. If we're
splatting a 64 bit value in 2 parts, we can avoid splatting the
upper bits and just let the low bits be sign extended. They won't
be read anyway.
For the purposes of SelectionDAG semantics of the generic ISD opcodes,
if hi was non-zero or bit 31 of the low is 1, the shift was already
undefined so it should be ok to replace high with sign extend of low.
In order do be able to find the split i64 value before it becomes
a stack operation, I added a new ISD opcode that will be expanded
to the stack spill in PreprocessISelDAG. This new node is conceptually
similar to BuildPairF64, but I expanded earlier so that we could
go through regular isel to get the right VLSE opcode for the LMUL.
BuildPairF64 is expanded in a CustomInserter.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D102521
RVV code generation does not successfully custom-lower BUILD_VECTOR in all
cases. When it resorts to default expansion it may, on occasion, be expanded to
scalar stores through the stack. Unfortunately these stores may then be picked
up by the post-legalization DAGCombiner which merges them again. The merged
store uses a BUILD_VECTOR which is then expanded, and so on.
This patch addresses the issue by overriding the `mergeStoresAfterLegalization`
hook. A lack of granularity in this method (being passed the scalar type) means
we opt out in almost all cases when RVV fixed-length vector support is enabled.
The only exception to this rule are mask vectors, which are always either
custom-lowered or are expanded to a load from a constant pool.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D102913
This patch supports all of the current set of VP integer binary
intrinsics by lowering them to to RVV instructions. It does so by using
the existing RISCVISD *_VL custom nodes as an intermediate layer. Both
scalable and fixed-length vectors are supported by using this method.
One notable change to the existing vector codegen strategy is that
scalable all-ones and all-zeros mask SPLAT_VECTORs are now lowered to
RISCVISD VMSET_VL and VMCLR_VL nodes to match their fixed-length
BUILD_VECTOR counterparts. This allows them to reuse the existing
"all-ones" VL patterns.
To reduce the size of the phabricator diff, some tests are intentionally
left out and will be added later if the patch is accepted.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101826
This patch adds support for splatting i1 types to fixed-length or
scalable vector types. It does so by lowering the operation to a SETCC
of the equivalent i8 type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101465
We can have RISCVISelDAGToDAG.cpp call the VT only version by
finding the RISCVTargetLowering object via the Subtarget.
Make the static versions just global static functions in
RISCVISelLowering that can be called by static functions in that
file.
This patch adds support for both scalable- and fixed-length vector code
lowering of the llvm.minnum and llvm.maxnum intrinsics to the equivalent
RVV instructions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101035
Prep work for adding intrinsics in the future.
Left an assert that the input is constant in ReplaceNodeResults,
as the intrinsic shouldn't go through that path.
This patch adds RVV codegen support for OR/XOR/AND reductions for both
scalable- and fixed-length vector types. There are a few possible
codegen strategies for each -- vmfirst.m, vmsbf.m, and vmsif.m could be
used to some extent -- but the vpopc.m instruction was chosen since it
produces the scalar result in one instruction, after which scalar
instructions can finish off the computation.
The reductions are lowered identically for both scalable- and
fixed-length vectors, although some alternate strategies may be more
optimal on fixed-length vectors since it's cheaper to get the length of
those types.
Other reduction types were not deemed to be relevant for mask vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D100030
New custom DAG nodes were added to represent operations on CSR. These
nodes are lowered to corresponding pseudo instruction. Using the pseudo
instructions allows to specify different scheduling information for
operations on different system registers. It also make possible to
specify dependencies of instructions on specific system registers.
Differential Revision: https://reviews.llvm.org/D98936
This can't use our normal strategy of splatting the scalar and using
a .vv operation instead of .vx.
Instead this patch bitcasts the vector to the equivalent SEW=32
vector and inserts the scalar parts using two vslide1up/down. We
do that unmasked and apply the mask separately at the end with
a vmerge.
For vslide1up there maybe some other options here like getting
i64 into element 0 and using vslideup.vi with this vector as
vd and the original source as vs1. Masking would still need to
be done afterwards.
That idea doesn't work for vslide1down. We need to slidedown and
then insert a single scalar at vl-1 which we could do with a
vslideup, but that assumes vl > 0 which I don't think we can assume.
The i32 double slide1down implemented here is the best I could come
up with and I just made vslide1up consistent.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D99910
It's a bit silly, but it allows us to write stricter type
constraints for isel. There's still some extra type checks in
the generated table due to some type interference limitations
around HWMode.
The default legalization strategy is PromoteFloat which keeps
half in single precision format through multiple floating point
operations. Conversion to/from float is done at loads, stores,
bitcasts, and other places that care about the exact size being 16
bits.
This patches switches to the alternative method softPromoteHalf.
This aims to keep the type in 16-bit format between every operation.
So we promote to float and immediately round for any arithmetic
operation. This should be closer to the IR semantics since we
are rounding after each operation and not accumulating extra
precision across multiple operations. X86 is the only other
target that enables this today. See https://reviews.llvm.org/D73749
I had to update getRegisterTypeForCallingConv to force f16 to
use f32 when the F extension is enabled. This way we can still
pass it in the lower bits of an FPR for ilp32f and lp64f ABIs.
The softPromoteHalf would otherwise always give i16 as the
argument type.
Reviewed By: asb, frasercrmck
Differential Revision: https://reviews.llvm.org/D99148
There's no target independent ISD opcode for MULHSU, so custom
legalize 2*XLen multiplies ourselves. We have to be a little
careful to prefer MULHU or MULHSU.
I thought about doing this in isel by pattern matching the
(add (mul X, (srai Y, XLen-1)), (mulhu X, Y)) pattern. I decided
against this because the add might become part of a chain of adds.
I don't trust DAG combine not to reassociate with other adds making
it difficult to find both pieces again.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D99479
Our CLZW isel pattern is quite easily broken by surrounding code
preventing it from matching sometimes. This usually results in
failing to remove the and X, 0xffffffff inserted by type
legalization. The add with -32 that type legalization also inserts
will often gets combined into other add/sub nodes. That doesn't
usually result in extra code when we don't use clzw.
CTTZ seems to be less fragile, but I wanted to keep it consistent
with CTLZ.
Reviewed By: asb, HsiangKai
Differential Revision: https://reviews.llvm.org/D99317
This adds almost everything required for supporting the new stepvector
intrinsic on RVV. It is lowered to the existing VID_VL SDNode.
The only exception is a limitation that RV32 cannot yet lower the
intrinsic on i64 vectors. This is because the step operand is
(currently) required to be at least as large as the vector element type.
I will look into patching that out and loosening the requirement to only
an integer pointer type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D99594
I've split the gather/scatter custom handler to avoid complicating
it with even more differences between gather/scatter.
Tests are the scalable vector tests with the vscale removed and
dropped the tests that used vector.insert. We're probably not
as thorough on the splitting cases since we use 128 for VLEN here
but scalable vector use a known min size of 64.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98991
This patch adds support for masked scatter intrinsics on scalable vector
types. It is mostly an extension of the earlier masked gather support
introduced in D96263, since the addressing mode legalization is the
same.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96486
This patch supports the masked gather intrinsics in RVV.
The RVV indexed load/store instructions only support the "unsigned unscaled"
addressing mode; indices are implicitly zero-extended or truncated to XLEN and
are treated as byte offsets. This ISA supports the intrinsics directly, but not
the majority of various forms of the MGATHER SDNode that LLVM combines to. Any
signed or scaled indexing is extended to the XLEN value type and scaled
accordingly. This is done during DAG combining as widening the index types to
XLEN may produce illegal vectors that require splitting, e.g.
nxv16i8->nxv16i64.
Support for scalable-vector CONCAT_VECTORS was added to avoid spilling via the
stack when lowering split legalized index operands.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96263
This allows me to introduce similar combines for branches as
we have recently added for SELECT_CC. Some of them are less
useful for standalone setccs and only help branch instructions.
By having a BR_CC node its easier to only affect branches.
I'm using CondCodeSDNode to make isel patterns easier to
write so we can refer to the codes by name. SELECT_CC uses a
constant instead.
I've translated the condition code just like SELECT_CC so
we need less patterns for the swapped conditions. This
includes special cases for X < 1 and X > -1 that get translated
to blez and bgez by using a 0 constant.
computeKnownBitsForTargetNode support for SELECT_CC is added
to allow MaskedValueIsZero to work for cases where the true
and false values of the SELECT_CC are setccs and the
result of the SELECT_CC is used by a BR_CC. This was needed
to avoid regressions in some of the overflow tests.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D98159
Types of fractional LMUL and LMUL=1 are all using VR register class. When
using inline asm, it will use the first type in the register class as the
type for the register. It is not necessary the same as the value type. We
need to use INSERT_SUBVECTOR/EXTRACT_SUBVECToR/BITCAST to make it legal
to put the value in the corresponding register class.
Differential Revision: https://reviews.llvm.org/D97480
This patch optimizes the codegen for INSERT_VECTOR_ELT in various ways.
Primarily, it removes the use of vslidedown during lowering, and the
vector element is inserted entirely using vslideup with a custom VL and
slide index.
Additionally, lowering of i64-element vectors on RV32 has been optimized
in several ways. When the 64-bit value to insert is the same as the
sign-extension of the lower 32-bits, the codegen can follow the regular
path. When this is not possible, a new sequence of two i32 vslide1up
instructions is used to get the vector element into a vector. This
sequence was suggested by @craig.topper. From there, the value is slid
into the final position for more consistent lowering across RV32 and
RV64.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98250
We don't support any other shuffles currently.
This changes the bswap/bitreverse tests that check for this in
their expansion code. Previously we expanded a byte swapping
shuffle through memory. Now we're scalarizing and doing bit
operations on scalars to swap bytes.
In the future we can probably use vrgather.vx to do a byte swap
shuffle.
On riscv32, i64 isn't a legal scalar type but we would like to
support scalable vectors of i64.
This patch introduces a new node that can represent a splat made
of multiple scalar values. I've used this new node to solve the current
crashes we experience when getConstant is used after type legalization.
For RISCV, we are now default expanding SPLAT_VECTOR to SPLAT_VECTOR_PARTS
when needed and then handling the SPLAT_VECTOR_PARTS later during
LegalizeOps. I've remove the special case I previously put in for
ABS for D97991 as the default expansion is now able to succesfully
use getConstant.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98004
Currently we crash in type legalization any time an intrinsic
uses a scalar i64 on RV32.
This patch adds support for type legalizing this to prevent
crashing. I don't promise that it uses the best possible codegen
just that it is functional.
This first version handles 3 cases. vmv.v.x intrinsic, vmv.s.x
intrinsic and intrinsics that take a scalar input, splat it and
then do some operation.
For vmv.v.x we'll either rely on hardware sign extension for
constants or we'll convert it to multiple splats and bit
manipulation.
For vmv.s.x we use a really unoptimal sequence inspired by what
we do for an INSERT_VECTOR_ELT.
For the third case we'll either try to use the .vi form for
constants or convert to a complicated splat and bitmanip and use
the .vv form of the operation.
I've renamed the ExtendOperand field to SplatOperand now use it
specifically for the third case. The first two cases are handled
by custom lowering specifically for those intrinsics.
I haven't updated all tests yet, but I tried to cover a subset
that includes single-width, widening, and narrowing.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97895
I've left mask registers to a future patch as we'll need
to convert them to full vectors, shuffle, and then truncate.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97609
I've included tests that require type legalization to split the
vector. The i64 version of these scalarizes on RV32 due to type
legalization visiting the result before the vector type. So we
have to abort our custom expansion to avoid creating target
specific nodes with an illegal type. Then type legalization ends
up scalarizing. We might be able to fix this by doing custom
splitting for large vectors in our handler to get down to a legal
type.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D98102
The default fixed vector expansion uses sra+xor+add since it can't
see that smax is legal due to our custom handling. So we select
smax(X, sub(0, X)) manually.
Scalable vectors are able to use the smax expansion automatically
for most cases. It crashes in one case because getConstant can't build a
SPLAT_VECTOR for nxvXi64 when i64 scalars aren't legal. So
we manually emit a SPLAT_VECTOR_I64 for that case.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97991
While working on adding fixed-length vectors to the calling convention,
it was necessary to be able to query for a fixed-length vector container
type without access to an instance of SelectionDAG.
This patch modifies the "main" getContainerForFixedLengthVector function
to use an instance of TargetLowering rather than SelectionDAG, and
preserves the SelectionDAG overload as a wrapper.
An additional non-static version of the function was also added to
simplify the common case in RISCVTargetLowering.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97925
This patch fixes up one case where the fixed-length-vector VL was
dropped (falling back to VLMAX) when inserting vector elements, as the
code would lower via ISD::INSERT_VECTOR_ELT (at index 0) which loses the
fixed-length vector information.
To this end, a custom node, VMV_S_XF_VL, was introduced to carry the VL
operand through to the final instruction. This node wraps the RVV
vmv.s.x and vmv.s.f instructions, which were being selected by
insert_vector_elt anyway.
There should be no observable difference in scalable-vector codegen.
There is still one outstanding drop from fixed-length VL to VLMAX, when
an i64 element is inserted into a vector on RV32; the splat (which is
custom legalized) has no notion of the original fixed-length vector
type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97842
This patch enables support for lowering INSERT_VECTOR_ELT on
fixed-length vector types. The strategy follows that for scalable vector
types.
This patch also includes a quick fix to prevent the compiler infinitely
looping between lowering BUILD_VECTOR as VECTOR_SHUFFLE and back again.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97698
This patch extends the support for scalable-vector int->fp and fp->int
conversions by additionally handling fixed-length vectors.
The existing scalable-vector lowering re-expresses widening/narrowing by
x4+ conversions as standard nodes. The fixed-length vector support slots
in at "the end" of this process by lowering the now equally-sized and
widening/narrowing by x2 nodes to our custom VL versions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97374
This patch extends the support for vector FP_ROUND and FP_EXTEND by
including support for fixed-length vector types. Since fixed-length
vectors use "VL" nodes and scalable vectors can use the standard nodes,
there is slightly more to do in the fixed-length case. A helper function
was introduced to try and reduce the divergent paths. It is expected
that this function will similarly come in useful for lowering the
int-to-fp and fp-to-int operations for fixed-length vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97301
This patch extends support for our custom-lowering of scalable-vector
truncates to include those of fixed-length vectors. It does this by
co-opting the custom RISCVISD::TRUNCATE_VECTOR node and adding mask and
VL operands. This avoids unnecessary duplication of patterns and
inflation of the ISel table.
Some truncates go through CONCAT_VECTORS which currently isn't
efficiently handled, as it goes through the stack. This can be improved
upon in the future.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97202
This patch adds support for the custom lowering sign- and zero-extension
of fixed-length vector types. It does so through custom nodes. Since the
source and destination types are (necessarily) of different sizes, it is
possible that the source type is legal whilst the larger destination
type isn't. In this case the legalization makes heavy use of
EXTRACT_SUBVECTOR.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97194
This patch unifies the two disparate paths for lowering
EXTRACT_SUBVECTOR operations under one roof. Consequently, with this
patch it is possible to support any fixed-length subvector extraction,
not just "cast-like" ones.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D97192
This patch extends the support for RVV INSERT_SUBVECTOR to cover those
which don't align to a vector register boundary. Like the support for
EXTRACT_SUBVECTOR in D96959, it accomplishes this by extracting the
nearest register-sized subvector (a subregister operation), then sliding
the vector down with VSLIDEDOWN, inserting the subvector to the first
position, and sliding the vector back up again afterwards.
Unlike subvector extraction, for vectors that occupy less than a full
vector register we must preserve the untouched elements. We do this by
lowering to an LMUL=1 INSERT_SUBVECTOR using the above method and
lowering that to a VSLIDEUP with a zero offset. This uses a
tail-undisturbed policy and so has the effect of "sliding in" the
subvector elements while preserving the surrounding ones.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96972
A previous patch moved the index versions. This moves the rest.
I also removed the custom lowering for VLEFF since we can now
do everything directly in the isel handling.
I had to update getLMUL to handle mask registers to index the
pseudo table correctly for VLE1/VSE1.
This is good for another 15K reduction in llc size.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D97097
This patch extends the support for RVV EXTRACT_SUBVECTOR to cover those
which don't align to a vector register boundary. It accomplishes this by
extracting the nearest register-sized subvector (a subregister
operation), then sliding the vector down with VSLIDEDOWN and extracting
the subvector from the first position (a COPY operation).
Since this procedure involves the use of VSCALE and multiplication, the
handling of such operations is done during lowering to simplify the
implementation and make use of DAG combining. This necessitated moving
some helper functions from RISCVISelDAGToDAG to RISCVTargetLowering.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96959
We previously used isel patterns for this, but that used quite
a bit of space in the isel table due to OR being associative
and commutative. It also wouldn't handle shifts/ands being in
reversed order.
This generalizes the shift/and matching from GREVI to
take the expected mask table as input so we can reuse it for
SHFLI.
There is no SHFLIW instruction, but we can promote a 32-bit
SHFLI to i64 on RV64. As long as bit 4 of the control bit isn't
set, a 64-bit SHFLI will preserve 33 sign bits if the input had
at least 33 sign bits. ComputeNumSignBits has been updated to
account for that to avoid sext.w in the tests.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96661
This uses to division by constant optimization to use MULHU/MULHS.
Reviewed By: frasercrmck, arcbbb
Differential Revision: https://reviews.llvm.org/D96934
This patch adds support for fixed-length vector vselect. It does so by
lowering them to a custom unmasked VSELECT_VL node with a vector length
operand.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96768
This is annoying because the condition code legalization belongs
to LegalizeDAG, but our custom handler runs in Legalize vector ops
which occurs earlier.
This adds some of the mask binary operations so that we can combine
multiple compares that we need for expansion.
I've also fixed up RISCVISelDAGToDAG.cpp to handle copies of masks.
This patch contains a subset of the integer setcc patch as well.
That patch is dependent on the integer binary ops patch. I'll rebase
based on what order the patches go in.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96567
This patch prepares the RISCV VSLIDEUP and VSLIDEDOWN custom nodes to
ones carrying additional mask and vector-length operands. This is
primarily so they can be used by both systems.
This also takes the opportunity to create some helper functions to deal
with the common task of getting the default (unmasked) VL operands.
Reviewed By: craig.topper, arcbbb
Differential Revision: https://reviews.llvm.org/D96505
I believe I've covered all orderings of splat operands here. Better
canonicalization in lowering might help reduce this. I did not handle
the immediate adjustments needed for set(u)gt/set(u)lt.
Testing here is limited to byte types because the scalable vector
type used for masks for the store is calculated assuming 8 byte
elements. But for the setcc its based on the element count of the
container type for the setcc input. So they don't agree. We'll need
to enhanced D96352 to handle this I think.
Differential Revision: https://reviews.llvm.org/D96443
This patch extends the initial fixed-length vector support to include
smin, smax, umin, and umax.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96491
The test cases extract a fixed element from a vector and splat it
into a vector. This gets DAG combined into a splat shuffle.
I've used some very wide vectors in the test to make sure we have
at least a couple tests where the element doesn't fit into the
uimm5 immediate of vrgather.vi so we fall back to vrgather.vx.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96186
This patch optimizes a build_vector "index sequence" and lowers it to
the existing custom RISCVISD::VID node. This pattern is common in
autovectorized code.
The custom node was updated to allow it to be used by both scalable and
fixed-length vectors, thus avoiding pattern duplication.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96332
Define an option -riscv-vector-bits-max to specify the maximum vector
bits for vectorizer. Loop vectorizer will use the value to check if it
is safe to use the whole vector registers to vectorize the loop.
It is not the optimum solution for loop vectorizing for scalable vector.
It assumed the whole vector registers will be used to vectorize the code.
If it is possible, we should configure vl to do vectorize instead of
using whole vector registers.
We only consider LMUL = 1 in this patch.
This patch just an initial work for loop vectorizer for RISC-V Vector.
Differential Revision: https://reviews.llvm.org/D95659
Building on the fixed vector support from D95705
I've added ISD nodes for vmv.v.x and vfmv.v.f and switched to
lowering the intrinsics to it. This allows us to share the same
isel patterns for both.
This doesn't handle splats of i64 on RV32 yet. The build_vector
gets converted to a vXi32 build_vector+bitcast during type
legalization. Not sure the best way to handle this at the moment.
Differential Revision: https://reviews.llvm.org/D96108
This is an alternative to D95563.
This is modeled after a similar feature for AArch64's SVE that uses
predicated scalable vector instructions.a
Rather than use predication, this patch uses an explicit VL operand.
I've limited it to always use LMUL=1 for now, but we can improve this
in the future.
This requires a bunch of new ISD opcodes to carry the VL operand.
I think we can probably lower intrinsics to these ISD opcodes to
cut down on the size of the isel table. Which is why I've added
patterns for all integer/float types and not just LMUL=1.
I'm only testing one vector width right now, but the width is
programmable via the command line.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D95705
This patch adds support for both the fadd reduction intrinsic, in both
the ordered and unordered modes.
The fmin and fmax intrinsics are not currently supported due to a
discrepancy between the LLVM semantics and the RVV ISA behaviour with
regards to signaling NaNs. This behaviour is likely fixed in version 2.3
of the RISC-V F/D/Q extension, but until then the intrinsics can be left
unsupported.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95870
This patch adds support for the integer reduction intrinsics supported
by RVV. This excludes "mul" which has no corresponding instruction.
The reduction instructions in RVV have slightly complicated type
constraints given they always produce a single "M1" vector register.
They are lowered to custom nodes including the second "scalar" reduction
operand to simplify the patterns and in the hope that they can be useful
for future DAG combines.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95620
This patch custom-legalizes all integer EXTRACT_VECTOR_ELT nodes where
SEW < XLEN to VMV_S_X nodes to help the compiler infer sign bits from
the result. This allows us to eliminate redundant sign extensions.
For parity, all integer EXTRACT_VECTOR_ELT nodes are legalized this way
so that we don't need TableGen patterns for some and not others.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95741
We need to add a mask to the shift amount for these operations
to use the FSR/FSL instructions. We were previously doing this
in isel patterns, but custom lowering will make the mask
visible to optimizations earlier.
This patch adds support for the full range of vector int-to-float,
float-to-int, and float-to-float conversions on legal types.
Many conversions are supported natively in RVV so are lowered with
patterns. These include conversions between (element) types of the same
size, and those that are half/double the size of the input. When
conversions take place between types that are less than half or more
than double the size we must lower them using sequences of instructions
which go via intermediate types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D95447
-Remove the ISD opcode for READ_VL. Just emit the MachineSDNode directly.
-Move segmented fault first only load intrinsic handling completely to
RISCVISelDAGToDAG.cpp and emit the ReadVL MachineSDNode there
instead of lowering to ISD opcodes first.
Original patch by @rogfer01.
This patch adds support for insertelt and extractelt operations on
scalable vectors.
Special care must be taken on RV32 when dealing with i64 vectors as
there are no straightforward ways to insert a 64-bit element without a
register of that size. To that end, both are custom-lowered to different
sequences.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94615
This makes our i8/i16 codegen more similar to the i32 codegen.
I've also added computeKnownBits support for DIVUW/REMUW so
that we can remove zero extending ANDs from the output. Without
this we end up turning DIVUW/REMUW back into DIVU/REMU via some
isel patterns.
Reviewed By: frasercrmck, luismarques
Differential Revision: https://reviews.llvm.org/D95322
As far as I know 32 bits arguments and returns on RV64 are always
sign extended to i64. So I think we should be taking this into
account around libcalls.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D95285
The fault-only-first-load instructions can reduce VL if an element
other than element 0 triggers a memory fault. This can be used to
vectorize loops with data dependent exit conditions like strcmp or
strlen.
This patch adds a VL output to these intrinsics so that the new
VL value can be captured by software. This will be expanded to
'csrr gpr, vl' after the vleff instruction during SelectionDAG.
By doing this with one intrinsic we are able to guarantee that the
csrr reads the VL value produced by the vleff instruction. Having
it as a separate intrinsic would make it impossible to guarantee
ordering without making every other vector intrinsic have side
effects.
The intrinsics are expanded during lowering into two ISD nodes
that are glued together. These ISD nodes will go
through isel separately, but should maintain the glue so that they
get emitted adjacently by InstrEmitter.
I've only ran the chain through the vleff instruction, allowing
the READ_VL to be deleted if it is unused.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D94286
For Zvlsseg, we need continuous vector registers for the values. We need
to define new register classes for the different combinations of (number
of fields and LMUL). For example,
when the number of fields(NF) = 3, LMUL = 2, the values will be assigned
to (V0M2, V2M2, V4M2), (V2M2, V4M2, V6M2), (V4M2, V6M2, V8M2), ...
We define the vlseg intrinsics with multiple outputs. There is no way to
describe the codegen patterns with multiple outputs in the tablegen
files. We do the codegen in RISCVISelDAGToDAG and use EXTRACT_SUBREG to
extract the values of output.
The multiple scalable vector values will be put into a struct. This
patch is depended on the support for scalable vector struct.
Differential Revision: https://reviews.llvm.org/D94229
Original patch by @rogfer01.
This patch adds support for sign-, zero-, and any-extension from
scalable mask vector types to integer vector types, as well as
truncation in the opposite direction.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94590
Original patch by @rogfer01.
This patch supports vector truncates, which on RVV must be done in a
series of instructions truncating by one power-of-two at a time. This is
done through custom-lowering and a custom node to avoid LLVM
re-combining the split TRUNCATE nodes.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94796
SimplifyDemandedBits can remove set bits from immediates from instructions
like AND/OR/XOR. This can prevent them from being efficiently
codegened on RISCV.
This adds an initial version that tries to keep or form 12 bit
sign extended immediates for AND operations to enable use of ANDI.
If that doesn't work we'll try to create a 32 bit sign extended immediate
to use LUI+ADDIW.
More optimizations are possible for different size immediates or
different operations. But this is a good starting point that already
has test coverage.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D94628
Some FP compares expand to a sequence ending with (xor X, 1) to invert the result. If
the consumer is a select_cc we can likely get rid of this xor by fixing
up the select_cc condition.
This patch combines (select_cc (xor X, 1), 0, setne, trueV, falseV) -
(select_cc X, 0, seteq, trueV, falseV) if we can prove X is 0/1.
Reviewed By: lenary
Differential Revision: https://reviews.llvm.org/D94546
This patch custom lowers ISD::VSCALE into a csrr vlenb followed
by a shift right by 3 followed by a multiply by the scale amount.
I've added computeKnownBits support to indicate that the csrr vlenb
always produces 3 trailng bits of 0s so the shift right is "exact".
This allows the shift and multiply sequence to be nicely optimized
into a single shift or removed completely when the scale amount is
a power of 2.
The non power of 2 case multiplying by 24 is still producing
suboptimal code. We could remove the right shift and use a
multiply by 3. Hopefully we can improve DAG combine to fix that
since it's not unique to this sequence.
This replaces D94144.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D94249
This patch extends the SDNode ISel support for RVV from only the
vector/vector instructions to include the vector/scalar and
vector/immediate forms.
It uses splat_vector to carry the scalar in each case, except when
XLEN<SEW (RV32 SEW=64) when a custom node `SPLAT_VECTOR_I64` is used for
type-legalization and to encode the fact that the value is sign-extended
to SEW. When the scalar is a full 64-bit value we use a sequence to
materialize the constant into the vector register.
The non-intrinsic ISel patterns have also been split into their own
file.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93312
This patch enables jump table lowering in the RISC-V backend.
In addition to the test case included, the new lowering was
tested by compiling the OCaml runtime and running it under qemu.
Differential Revision: https://reviews.llvm.org/D92097
This adds intrinsics for vmv.x.s and vmv.s.x.
I've used stricter type constraints on these intrinsics than what we've been doing on the arithmetic intrinsics so far. This will allow us to not need to pass the scalar type to the Intrinsic::getDeclaration call when creating these intrinsics.
A custom ISD is used for vmv.x.s in order to implement the change in computeNumSignBitsForTargetNode which can remove sign extends on the result.
I also modified the MC layer description of these instructions to show the tied source/dest operand. This is different than what we do for masked instructions where we drop the tied source operand when converting to MC. But it is a more accurate description of the instruction. We can't do this for masked instructions since we use the same MC instruction for masked and unmasked. Tools like llvm-mca operate in the MC layer and rely on ins/outs and Uses/Defs for analysis so I don't know if we'll be able to maintain the current behavior for masked instructions. So I went with the accurate description here since it was easy.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D93365
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Co-Authored-by: Monk Chiang <monk.chiang@sifive.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93366
Rather than having a different opcode for RV32 and RV64. Let's just say the integer type is XLenVT and use a single opcode for both modes.
Differential Revision: https://reviews.llvm.org/D92538
Craig Topper