protectors, to be near the stack protectors on the stack. Accomplish this by
tagging the stack object with a predicate that indicates that it would trigger
this. In the prolog-epilog inserter, assign these objects to the stack after the
stack protector but before the other objects.
llvm-svn: 109481
that the values they refer to aren't being deleted underneath them.
Make sure these containters get cleared by clear(), which IndVarSimplify
and LSR both use before deleting instructions.
llvm-svn: 109478
Simplifying use_iterators by dereferencing
is not a good idea. The codebase does not depend
in this any more, and it may introduce hidden
runtime cost. If you get compile errors, please
dereference your iterator before passing to cast<>
(and friends).
Also: please consider caching the result of
operator* and reusing that instead of dereferencing
many times.
llvm-svn: 109425
dependence on DominanceFrontier. Instead, add an explicit DominanceFrontier
pass in StandardPasses.h to ensure that it gets scheduled at the right
time.
Declare that loop unrolling preserves ScalarEvolution, and shuffle some
getAnalysisUsages.
This eliminates one LoopSimplify and one LCCSA run in the standard
compile opts sequence.
llvm-svn: 109413
appropriate for targets without detailed instruction iterineries.
The scheduler schedules for increased instruction level parallelism in
low register pressure situation; it schedules to reduce register pressure
when the register pressure becomes high.
On x86_64, this is a win for all tests in CFP2000. It also sped up 256.bzip2
by 16%.
llvm-svn: 109300
it's too late to start backing off aggressive latency scheduling when most
of the registers are in use so the threshold should be a bit tighter.
- Correctly handle live out's and extract_subreg etc.
- Enable register pressure aware scheduling by default for hybrid scheduler.
For ARM, this is almost always a win on # of instructions. It's runtime
neutral for most of the tests. But for some kernels with high register
pressure it can be a huge win. e.g. 464.h264ref reduced number of spills by
54 and sped up by 20%.
llvm-svn: 109279
is not a good idea. The codebase does not depend
in this any more, and it may introduce hidden
runtime cost. If you get compile errors, please
dereference your iterator before passing to cast<>
(and friends).
Also: please consider caching the result of
operator* and reusing that instead of dereferencing
many times.
llvm-svn: 109220
with an existing allocator. The interesting use case of this
is that it allows "StringMap<whatever, BumpPtrAllocator&>" for
when you want to allocate out of a preexisting bump pointer
allocator owned by someone else.
llvm-svn: 109213
ARM/PPC/MSP430-specific code (which are the only targets that
implement the hook) can directly reference their target-specific
instrinfo classes.
llvm-svn: 109171
The RegionInfo pass detects single entry single exit regions in a function,
where a region is defined as any subgraph that is connected to the remaining
graph at only two spots.
Furthermore an hierarchical region tree is built.
Use it by calling "opt -regions analyze" or "opt -view-regions".
llvm-svn: 109089
Make MDNode::destroy private.
Fix the one thing that used MDNode::destroy, outside of MDNode itself.
One should never delete or destroy an MDNode explicitly. MDNodes
implicitly go away when there are no references to them (implementation
details aside).
llvm-svn: 109028
to Parse mach-o files. All defines have been renamed to not conflict with
#defines in mach header files, all structures were left named the same but
are in the llvm::MachO namespace.
llvm-svn: 108953
bitcode file, so that two bitcode files where the same metadata kind
name happens to have been assigned a different ID can still be
linked together.
Eliminate the restriction that metadata kind IDs can't be 0.
Change MD_dbg from 1 to 0, because we can now, and because it's
less mysterious that way.
llvm-svn: 108939
better in the llvm world. Among other things, this changes:
1. The guts of libedis are now moved into lib/MC/MCDisassembler
2. llvm-mc now depends on lib/MC/MCDisassembler, not tools/edis,
so edis and mc don't have to be built in series.
3. lib/MC/MCDisassembler no longer depends on the C api, the C
API depends on it.
4. Various code cleanup changes.
There is still a lot to be done to make edis fit with the llvm
design, but this is an incremental step in the right direction.
llvm-svn: 108869
linked list. This is a little slower and involves more malloc'ing, but these lists are
typically short, and it allows PassInfo to be entirely constant initializable.
llvm-svn: 108755
- Currently includes a hack to limit ourselves to "In32BitMode" and "In64BitMode", because we don't have the other infrastructure to properly deal with setting SSE, etc. features on X86.
llvm-svn: 108677
- Unfortunate, but necessary for now to handle subtarget instruction matching. Eventually we should factor out the lower level target machine information so we don't need to do this.
llvm-svn: 108664
Still very much under development. Comments and fixes will be forthcoming.
(This commit includes some small tweaks to LiveIntervals & LoopInfo to support the splitter)
llvm-svn: 108615
since it doesn't work for front-ends which don't emit column information
(which includes llvm-gcc in its present configuration), and doesn't
work for clang for K&R style variables where the variables are declared
in a different order from the parameter list.
Instead, make a separate pass through the instructions to collect the
llvm.dbg.declare instructions in order. This ensures that the debug
information for variables is emitted in this order.
llvm-svn: 108538
-enable-no-nans-fp-math and -enable-no-infs-fp-math. All of the current codegen fp math optimizations only care whether the fp arithmetics arguments and results can never be NaN.
llvm-svn: 108465
independent of the order that isel happens to visit the dbg_declare
intrinsics. This fixes a bug in which the formal arguments were
being printed in reverse order, now that fast isel is going bottom up.
llvm-svn: 108369
with this commit the callee moves to the end of
the operand array (from the start) and the call
arguments now start at index 0 (formerly 1)
this ordering is now consistent with InvokeInst
this commit only flips the switch,
functionally it is equivalent to
r101465
I intend to commit several cleanups after a few
days of soak period
llvm-svn: 108240
- Currently initialization is a bit of a hack, but harmless. We need to rework
various parts of target initialization to clean this up.
llvm-svn: 108165
AggressiveAntiDepBreaker should not be using getPhysicalRegisterRegClass. An
instruction might be using a register that can only be replaced with one from
a subclass of getPhysicalRegisterRegClass.
With this patch we use getMinimalPhysRegClass. This is correct, but
conservative. We should check the uses of the register and select the
largest register class that can be used in all of them.
llvm-svn: 108122
Targets must now implement TargetInstrInfo::copyPhysReg instead. There is no
longer a default implementation forwarding to copyRegToReg.
llvm-svn: 108095
Use a COPY instruction instead for register copies, or TII::copyPhysReg() after
COPY instructions are lowered.
Targets should implement copyPhysReg instead of copyRegToReg.
llvm-svn: 108075
correct alignment information, which simplifies ExpandRes_VAARG a bit.
The patch introduces a new alignment information to TargetLoweringInfo. This is
needed since the two natural candidates cannot be used:
* The 's' in target data: If this is set to the minimal alignment of any
argument, getCallFrameTypeAlignment would return 4 for doubles on ARM for
example.
* The getTransientStackAlignment method. It is possible for an architecture to
have argument less aligned than what we maintain the stack pointer.
llvm-svn: 108072
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
llvm-svn: 108039
inserted in a MBB, and return an already inserted MI.
This target API change is necessary to allow foldMemoryOperand to call
storeToStackSlot and loadFromStackSlot when folding a COPY to a stack slot
reference in a target independent way.
The foldMemoryOperandImpl hook is going to change in the same way, but I'll wait
until COPY folding is actually implemented. Most targets only fold copies and
won't need to specialize this hook at all.
llvm-svn: 107991
U utils/TableGen/FastISelEmitter.cpp
--- Reverse-merging r107943 into '.':
U test/CodeGen/X86/fast-isel.ll
U test/CodeGen/X86/fast-isel-loads.ll
U include/llvm/Target/TargetLowering.h
U include/llvm/Support/PassNameParser.h
U include/llvm/CodeGen/FunctionLoweringInfo.h
U include/llvm/CodeGen/CallingConvLower.h
U include/llvm/CodeGen/FastISel.h
U include/llvm/CodeGen/SelectionDAGISel.h
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/CallingConvLower.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
U lib/CodeGen/SelectionDAG/FunctionLoweringInfo.cpp
U lib/CodeGen/SelectionDAG/FastISel.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
U lib/CodeGen/SelectionDAG/ScheduleDAGSDNodes.cpp
U lib/CodeGen/SelectionDAG/InstrEmitter.cpp
U lib/CodeGen/SelectionDAG/TargetLowering.cpp
U lib/Target/XCore/XCoreISelLowering.cpp
U lib/Target/XCore/XCoreISelLowering.h
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86ISelLowering.h
llvm-svn: 107987
Unlike insertMachineInstrInMaps this does not guarantee live intervals will
remain correct. The caller will need to manually update intervals to account
for the changes made to the CFG.
llvm-svn: 107958
.weak_def_can_be_hidden directive. Chris pointed out that the MCAsmInfo.h/.cpp
chunks aren't needed for this until the compiler starts generating these. And
when that happens it will be more convenient for it to be a bool than a const
char*.
llvm-svn: 107906
EXTRACT_SUBREG no longer appears as a machine instruction. Use COPY instead.
Add isCopy() checks in many places using isMoveInstr() and isExtractSubreg().
The isMoveInstr hook will be removed later.
llvm-svn: 107879
This target hook is intended to replace copyRegToReg entirely, but for now it
calls copyRegToReg.
Any remaining calls to copyRegToReg wil be replaced by COPY instructions.
llvm-svn: 107854
(if there are any) and use the one which remains available for the longest
rather than just using the first one. This should help enable better re-use
of the loaded frame index values. rdar://7318760
llvm-svn: 107847
around everywhere, and also give it an InsertPt member, to enable isel
to operate at an arbitrary position within a block, rather than just
appending to a block.
llvm-svn: 107791
interface needs implementations to be consistent, so any code which
wants to support different semantics must use a different interface.
It's not currently worthwhile to add a new interface for this new
concept.
Document that AliasAnalysis doesn't support cross-function queries.
llvm-svn: 107776
It is OK for an alias live range to overlap if there is a copy to or from the
physical register. CoalescerPair can work out if the copy is coalescable
independently of the alias.
This means that we can join with the actual destination interval instead of
using the getOrigDstReg() hack. It is no longer necessary to merge clobber
ranges into subregisters.
llvm-svn: 107695
making all of CallInst's low-level operand accessors
private
If you get compile errors I strongly urge you to
update your code.
I tried to write the necessary clues into the
header where the compiler may point to, but no
guarantees. It works for my GCC.
You have several options to update your code:
- you can use the v2.8 ArgOperand accessors
- you can go via a temporary CallSite
- you can upcast to, say, User and call its
low-level accessors if your code is definitely
operand-order agnostic.
If you run into serious problems, please
comment in below thread (and back out this
revision only if absolutely necessary):
<http://groups.google.com/group/llvm-dev/browse_thread/thread/64650cf343b28271>
llvm-svn: 107667
second round of low-level interface squeeze-out:
making all of CallInst's low-level operand accessors
private
If you get compile errors I strongly urge you to
update your code.
I tried to write the necessary clues into the
header where the compiler may point to, but no
guarantees. It works for my GCC.
You have several options to update your code:
- you can use the v2.8 ArgOperand accessors
- you can go via a temporary CallSite
- you can upcast to, say, User and call its
low-level accessors if your code is definitely
operand-order agnostic.
If you run into serious problems, please
comment in below thread (and back out this
revision only if absolutely necessary):
<http://groups.google.com/group/llvm-dev/browse_thread/thread/64650cf343b28271>
llvm-svn: 107580
Tobias Grosser