memcpy lowering code; this ensures that the size node has the desired
result type. This fixes a regression from r49572 with @llvm.memcpy.i64
on x86-32.
llvm-svn: 49761
optimized x86-64 (and x86) calls so that they work (... at least for
my test cases).
Should fix the following problems:
Problem 1: When i introduced the optimized handling of arguments for
tail called functions (using a sequence of copyto/copyfrom virtual
registers instead of always lowering to top of the stack) i did not
handle byval arguments correctly e.g they did not work at all :).
Problem 2: On x86-64 after the arguments of the tail called function
are moved to their registers (which include ESI/RSI etc), tail call
optimization performs byval lowering which causes xSI,xDI, xCX
registers to be overwritten. This is handled in this patch by moving
the arguments to virtual registers first and after the byval lowering
the arguments are moved from those virtual registers back to
RSI/RDI/RCX.
llvm-svn: 49584
on any current target and aren't optimized in DAGCombiner. Instead
of using intermediate nodes, expand the operations, choosing between
simple loads/stores, target-specific code, and library calls,
immediately.
Previously, the code to emit optimized code for these operations
was only used at initial SelectionDAG construction time; now it is
used at all times. This fixes some cases where rep;movs was being
used for small copies where simple loads/stores would be better.
This also cleans up code that checks for alignments less than 4;
let the targets make that decision instead of doing it in
target-independent code. This allows x86 to use rep;movs in
low-alignment cases.
Also, this fixes a bug that resulted in the use of rep;stos for
memsets of 0 with non-constant memory size when the alignment was
at least 4. It's better to use the library in this case, which
can be significantly faster when the size is large.
This also preserves more SourceValue information when memory
intrinsics are lowered into simple loads/stores.
llvm-svn: 49572
LLVM Value/Use does and MachineRegisterInfo/MachineOperand does.
This allows constant time for all uses list maintenance operations.
The idea was suggested by Chris. Reviewed by Evan and Dan.
Patch is tested and approved by Dan.
On normal use-cases compilation speed is not affected. On very big basic
blocks there are compilation speedups in the range of 15-20% or even better.
llvm-svn: 48822
flags. This is needed by the new legalize types
infrastructure which wants to expand the 64 bit
constants previously used to hold the flags on
32 bit machines. There are two functional changes:
(1) in LowerArguments, if a parameter has the zext
attribute set then that is marked in the flags;
before it was being ignored; (2) PPC had some bogus
code for handling two word arguments when using the
ELF 32 ABI, which was hard to convert because of
the bogusness. As suggested by the original author
(Nicolas Geoffray), I've disabled it for the moment.
Tested with "make check" and the Ada ACATS testsuite.
llvm-svn: 48640
1. There is now a "PAListPtr" class, which is a smart pointer around
the underlying uniqued parameter attribute list object, and manages
its refcount. It is now impossible to mess up the refcount.
2. PAListPtr is now the main interface to the underlying object, and
the underlying object is now completely opaque.
3. Implementation details like SmallVector and FoldingSet are now no
longer part of the interface.
4. You can create a PAListPtr with an arbitrary sequence of
ParamAttrsWithIndex's, no need to make a SmallVector of a specific
size (you can just use an array or scalar or vector if you wish).
5. All the client code that had to check for a null pointer before
dereferencing the pointer is simplified to just access the
PAListPtr directly.
6. The interfaces for adding attrs to a list and removing them is a
bit simpler.
Phase #2 will rename some stuff (e.g. PAListPtr) and do other less
invasive changes.
llvm-svn: 48289
field to 32 bits, thus enabling correct handling of ByVal
structs bigger than 0x1ffff. Abstract interface a bit.
Fixes gcc.c-torture/execute/pr23135.c and
gcc.c-torture/execute/pr28982b.c in gcc testsuite (were ICE'ing
on ppc32, quietly producing wrong code on x86-32.)
llvm-svn: 48122
into a vector of zeros or undef, and when the top part is obviously
zero, we can just use movd + shuffle. This allows us to compile
vec_set-B.ll into:
_test3:
movl $1234567, %eax
andl 4(%esp), %eax
movd %eax, %xmm0
ret
instead of:
_test3:
subl $28, %esp
movl $1234567, %eax
andl 32(%esp), %eax
movl %eax, (%esp)
movl $0, 4(%esp)
movq (%esp), %xmm0
addl $28, %esp
ret
llvm-svn: 48090
2) Don't try to insert an i64 value into the low part of a
vector with movq on an x86-32 target. This allows us to
compile:
__m128i doload64(short x) {return _mm_set_epi16(0,0,0,0,0,0,0,1);}
into:
_doload64:
movaps LCPI1_0, %xmm0
ret
instead of:
_doload64:
subl $28, %esp
movl $0, 4(%esp)
movl $1, (%esp)
movq (%esp), %xmm0
addl $28, %esp
ret
llvm-svn: 48057
stack slot and store if the SINT_TO_FP is actually legal. This allows
us to compile:
double a(double b) {return (unsigned)b;}
to:
_a:
cvttsd2siq %xmm0, %rax
movl %eax, %eax
cvtsi2sdq %rax, %xmm0
ret
instead of:
_a:
subq $8, %rsp
cvttsd2siq %xmm0, %rax
movl %eax, %eax
cvtsi2sdq %rax, %xmm0
addq $8, %rsp
ret
crazy.
llvm-svn: 47660
GOT-style position independent code. Before only tail calls to
protected/hidden functions within the same module were optimized.
Now all function calls are tail call optimized.
llvm-svn: 47594
calls. Before arguments that could overwrite each other were
explicitly lowered to a stack slot, not giving the register allocator
a chance to optimize. Now a sequence of copyto/copyfrom virtual
registers ensures that arguments are loaded in (virtual) registers
before they are lowered to the stack slot (and might overwrite each
other). Also parameter stack slots are marked mutable for
(potentially) tail calling functions.
llvm-svn: 47593
instead of with mmx registers. This horribleness is apparently
done by gcc to avoid having to insert emms in places that really
should have it. This is the second half of rdar://5741668.
llvm-svn: 47474
GCC apparently does this, and code depends on not having to do
emms when this happens. This is x86-64 only so far, second half
should handle x86-32.
rdar://5741668
llvm-svn: 47470
has plain one-result scalar integer multiplication instructions.
This avoids expanding such instructions into MUL_LOHI sequences that
must be special-cased at isel time, and avoids the problem with that
code that provented memory operands from being folded.
This fixes PR1874, addressesing the most common case. The uncommon
cases of optimizing multiply-high operations will require work
in DAGCombiner.
llvm-svn: 47277
the return value is zero-extended if it isn't
sign-extended. It may also be any-extended.
Also, if a floating point value was returned
in a larger floating point type, pass 1 as the
second operand to FP_ROUND, which tells it
that all the precision is in the original type.
I think this is right but I could be wrong.
Finally, when doing libcalls, set isZExt on
a parameter if it is "unsigned". Currently
isSExt is set when signed, and nothing is
set otherwise. This should be right for all
calls to standard library routines.
llvm-svn: 47122
1) ConstantFP is now expand by default
2) ConstantFP is not turned into TargetConstantFP during Legalize
if it is legal.
This allows ConstantFP to be handled like Constant, allowing for
targets that can encode FP immediates as MachineOperands.
As a bonus, fix up Itanium FP constants, which now correctly match,
and match more constants! Hooray.
llvm-svn: 47121
initializer problem, a minor tweak to the way the
DAGISelEmitter finds load/store nodes, and a renaming of the
new PseudoSourceValue objects.
llvm-svn: 46827
Added ISD::DECLARE node type to represent llvm.dbg.declare intrinsic. Now the intrinsic calls are lowered into a SDNode and lives on through out the codegen passes.
For now, since all the debugging information recording is done at isel time, when a ISD::DECLARE node is selected, it has the side effect of also recording the variable. This is a short term solution that should be fixed in time.
llvm-svn: 46659
in the backend. Introduce a new SDNode type, MemOperandSDNode, for
holding a MemOperand in the SelectionDAG IR, and add a MemOperand
list to MachineInstr, and code to manage them. Remove the offset
field from SrcValueSDNode; uses of SrcValueSDNode that were using
it are all all using MemOperandSDNode now.
Also, begin updating some getLoad and getStore calls to use the
PseudoSourceValue objects.
Most of this was written by Florian Brander, some
reorganization and updating to TOT by me.
llvm-svn: 46585
This case returns the value in ST(0) and then has to convert it to an SSE
register. This causes significant codegen ugliness in some cases. For
example in the trivial fp-stack-direct-ret.ll testcase we used to generate:
_bar:
subl $28, %esp
call L_foo$stub
fstpl 16(%esp)
movsd 16(%esp), %xmm0
movsd %xmm0, 8(%esp)
fldl 8(%esp)
addl $28, %esp
ret
because we move the result of foo() into an XMM register, then have to
move it back for the return of bar.
Instead of hacking ever-more special cases into the call result lowering code
we take a much simpler approach: on x86-32, fp return is modeled as always
returning into an f80 register which is then truncated to f32 or f64 as needed.
Similarly for a result, we model it as an extension to f80 + return.
This exposes the truncate and extensions to the dag combiner, allowing target
independent code to hack on them, eliminating them in this case. This gives
us this code for the example above:
_bar:
subl $12, %esp
call L_foo$stub
addl $12, %esp
ret
The nasty aspect of this is that these conversions are not legal, but we want
the second pass of dag combiner (post-legalize) to be able to hack on them.
To handle this, we lie to legalize and say they are legal, then custom expand
them on entry to the isel pass (PreprocessForFPConvert). This is gross, but
less gross than the code it is replacing :)
This also allows us to generate better code in several other cases. For
example on fp-stack-ret-conv.ll, we now generate:
_test:
subl $12, %esp
call L_foo$stub
fstps 8(%esp)
movl 16(%esp), %eax
cvtss2sd 8(%esp), %xmm0
movsd %xmm0, (%eax)
addl $12, %esp
ret
where before we produced (incidentally, the old bad code is identical to what
gcc produces):
_test:
subl $12, %esp
call L_foo$stub
fstpl (%esp)
cvtsd2ss (%esp), %xmm0
cvtss2sd %xmm0, %xmm0
movl 16(%esp), %eax
movsd %xmm0, (%eax)
addl $12, %esp
ret
Note that we generate slightly worse code on pr1505b.ll due to a scheduling
deficiency that is unrelated to this patch.
llvm-svn: 46307
precision integers. This won't actually work
(and most of the code is dead) unless the new
legalization machinery is turned on. While
there, I rationalized the handling of i1, and
removed some bogus (and unused) sextload patterns.
For i1, this could result in microscopically
better code for some architectures (not X86).
It might also result in worse code if annotating
with AssertZExt nodes turns out to be more harmful
than helpful.
llvm-svn: 46280
1. Legalize now always promotes truncstore of i1 to i8.
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
safe.
The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:
_foo:
fldt 20(%esp)
fldt 4(%esp)
faddp %st(1)
movl 36(%esp), %eax
fstps (%eax)
ret
instead of:
_foo:
subl $4, %esp
fldt 24(%esp)
fldt 8(%esp)
faddp %st(1)
fstps (%esp)
movl 40(%esp), %eax
movss (%esp), %xmm0
movss %xmm0, (%eax)
addl $4, %esp
ret
llvm-svn: 46140
and switch various codegen pieces and the X86 backend over
to using it.
* Add some comments to SelectionDAGNodes.h
* Introduce a second argument to FP_ROUND, which indicates
whether the FP_ROUND changes the value of its input. If
not it is safe to xform things like fp_extend(fp_round(x)) -> x.
llvm-svn: 46125
it should work, but I have no machine to test
it on. Committed because it will at least
cause no harm, and maybe someone can test it
for me!
llvm-svn: 46098
make the 'fp return in ST(0)' optimization smart enough to
look through token factor nodes. THis allows us to compile
testcases like CodeGen/X86/fp-stack-retcopy.ll into:
_carg:
subl $12, %esp
call L_foo$stub
fstpl (%esp)
fldl (%esp)
addl $12, %esp
ret
instead of:
_carg:
subl $28, %esp
call L_foo$stub
fstpl 16(%esp)
movsd 16(%esp), %xmm0
movsd %xmm0, 8(%esp)
fldl 8(%esp)
addl $28, %esp
ret
Still not optimal, but much better and this is a trivial patch. Fixing
the rest requires invasive surgery that is is not llvm 2.2 material.
llvm-svn: 46054
commit all arguments where moved to the stack slot where they would
reside on a normal function call before the lowering to the tail call
stack slot. This was done to prevent arguments overwriting each other.
Now only arguments sourcing from a FORMAL_ARGUMENTS node or a
CopyFromReg node with virtual register (could also be a caller's
argument) are lowered indirectly.
--This line, and those below, will be ignored--
M X86/X86ISelLowering.cpp
M X86/README.txt
llvm-svn: 45867
unifying the copied algorithms and saving over 500 LOC. There should
be no functionality change, but please test on your favorite x86
target.
llvm-svn: 45627
that "machine" classes are used to represent the current state of
the code being compiled. Given this expanded name, we can start
moving other stuff into it. For now, move the UsedPhysRegs and
LiveIn/LoveOuts vectors from MachineFunction into it.
Update all the clients to match.
This also reduces some needless #includes, such as MachineModuleInfo
from MachineFunction.
llvm-svn: 45467
e.g. MO.isMBB() instead of MO.isMachineBasicBlock(). I don't plan on
switching everything over, so new clients should just start using the
shorter names.
Remove old long accessors, switching everything over to use the short
accessor: getMachineBasicBlock() -> getMBB(),
getConstantPoolIndex() -> getIndex(), setMachineBasicBlock -> setMBB(), etc.
llvm-svn: 45464
SelectionDAG::getConstant, in the same way as vector floating-point
constants. This allows the legalize expansion code for @llvm.ctpop and
friends to be usable with vector types.
llvm-svn: 44954
possible before resorting to pextrw and pinsrw.
- Better codegen for v4i32 shuffles masquerading as v8i16 or v16i8 shuffles.
- Improves (i16 extract_vector_element 0) codegen by recognizing
(i32 extract_vector_element 0) does not require a pextrw.
llvm-svn: 44836
the function type, instead they belong to functions
and function calls. This is an updated and slightly
corrected version of Reid Spencer's original patch.
The only known problem is that auto-upgrading of
bitcode files doesn't seem to work properly (see
test/Bitcode/AutoUpgradeIntrinsics.ll). Hopefully
a bitcode guru (who might that be? :) ) will fix it.
llvm-svn: 44359
sometimes emit "zero" and "all one" vectors multiple times,
for example:
_test2:
pcmpeqd %mm0, %mm0
movq %mm0, _M1
pcmpeqd %mm0, %mm0
movq %mm0, _M2
ret
instead of:
_test2:
pcmpeqd %mm0, %mm0
movq %mm0, _M1
movq %mm0, _M2
ret
This patch fixes this by always arranging for zero/one vectors
to be defined as v4i32 or v2i32 (SSE/MMX) instead of letting them be
any random type. This ensures they get trivially CSE'd on the dag.
This fix is also important for LegalizeDAGTypes, as it gets unhappy
when the x86 backend wants BUILD_VECTOR(i64 0) to be legal even when
'i64' isn't legal.
This patch makes the following changes:
1) X86TargetLowering::LowerBUILD_VECTOR now lowers 0/1 vectors into
their canonical types.
2) The now-dead patterns are removed from the SSE/MMX .td files.
3) All the patterns in the .td file that referred to immAllOnesV or
immAllZerosV in the wrong form now use *_bc to match them with a
bitcast wrapped around them.
4) X86DAGToDAGISel::SelectScalarSSELoad is generalized to handle
bitcast'd zero vectors, which simplifies the code actually.
5) getShuffleVectorZeroOrUndef is updated to generate a shuffle that
is legal, instead of generating one that is illegal and expecting
a later legalize pass to clean it up.
6) isZeroShuffle is generalized to handle bitcast of zeros.
7) several other minor tweaks.
This patch is definite goodness, but has the potential to cause random
code quality regressions. Please be on the lookout for these and let
me know if they happen.
llvm-svn: 44310
1) Change the interface to TargetLowering::ExpandOperationResult to
take and return entire NODES that need a result expanded, not just
the value. This allows us to handle things like READCYCLECOUNTER,
which returns two values.
2) Implement (extremely limited) support in LegalizeDAG::ExpandOp for MERGE_VALUES.
3) Reimplement custom lowering in LegalizeDAGTypes in terms of the new
ExpandOperationResult. This makes the result simpler and fully
general.
4) Implement (fully general) expand support for MERGE_VALUES in LegalizeDAGTypes.
5) Implement ExpandOperationResult support for ARM f64->i64 bitconvert and ARM
i64 shifts, allowing them to work with LegalizeDAGTypes.
6) Implement ExpandOperationResult support for X86 READCYCLECOUNTER and FP_TO_SINT,
allowing them to work with LegalizeDAGTypes.
LegalizeDAGTypes now passes several more X86 codegen tests when enabled and when
type legalization in LegalizeDAG is ifdef'd out.
llvm-svn: 44300
adjustment fields, and an optional flag. If there is a "dynamic_stackalloc" in
the code, make sure that it's bracketed by CALLSEQ_START and CALLSEQ_END. If
not, then there is the potential for the stack to be changed while the stack's
being used by another instruction (like a call).
This can only result in tears...
llvm-svn: 44037
transformation. Previously, it's restricted by ensuring the number of load uses
is one. Now the restriction is loosened up by allowing setcc uses to be
"extended" (e.g. setcc x, c, eq -> setcc sext(x), sext(c), eq).
llvm-svn: 43465
To do this it is necessary to add a "always inline" argument to the
memcpy node. For completeness I have also added this node to memmove
and memset. I have also added getMem* functions, because the extra
argument makes it cumbersome to use getNode and because I get confused
by it :-)
llvm-svn: 43172
was stored to the acutal stack slot before the parameters were
lowered to their stack slot. This could cause arguments to be
overwritten by the return address if the called function had less
parameters than the caller function. The update should remove the
last failing test case of llc-beta: SPASS.
llvm-svn: 43027
enabled by passing -tailcallopt to llc. The optimization is
performed if the following conditions are satisfied:
* caller/callee are fastcc
* elf/pic is disabled OR
elf/pic enabled + callee is in module + callee has
visibility protected or hidden
llvm-svn: 42870
use ISD::{S,U}DIVREM and ISD::{S,U}MUL_HIO. Move the lowering code
associated with these operators into target-independent in LegalizeDAG.cpp
and TargetLowering.cpp.
llvm-svn: 42762
The only generated code difference is that now we call memcpy when
the size of the array is unknown. This matches GCC behavior and is
better since the run time value can be arbitrarily large.
llvm-svn: 42433
both results with a single div or idiv instruction. This uses new X86ISD
nodes for DIV and IDIV which are introduced during the legalize phase
so that the SelectionDAG's CSE can automatically eliminate redundant
computations.
llvm-svn: 42308
asm to die with:
ScheduleDAG.cpp:269: failed assertion `false && "Couldn't find the register class"'
instead of:
failed assertion `RegMap->getRegClass(VReg) == RC && "Register class of operand and regclass of use don't agree!"'
yay.
llvm-svn: 42259
keep f32 in SSE registers and f64 in x87. This
is effectively a new codegen mode.
Change addLegalFPImmediate to permit float and
double variants to do different things.
Adjust callers.
llvm-svn: 42246
double from some of the many places in the optimizers
it appears, and do something reasonable with x86
long double.
Make APInt::dump() public, remove newline, use it to
dump ConstantSDNode's.
Allow APFloats in FoldingSet.
Expand X86 backend handling of long doubles (conversions
to/from int, mostly).
llvm-svn: 41967
access to bits). Use them in place of float and
double interfaces where appropriate.
First bits of x86 long double constants handling
(untested, probably does not work).
llvm-svn: 41858
Use APFloat in UpgradeParser and AsmParser.
Change all references to ConstantFP to use the
APFloat interface rather than double. Remove
the ConstantFP double interfaces.
Use APFloat functions for constant folding arithmetic
and comparisons.
(There are still way too many places APFloat is
just a wrapper around host float/double, but we're
getting there.)
llvm-svn: 41747
Add APFloat interfaces to ConstantFP, SelectionDAG.
Fix integer bit in double->APFloat conversion.
Convert LegalizeDAG to use APFloat interface in
ConstantFPSDNode uses.
llvm-svn: 41587
Coping 100MB array (after a warmup) shows that glibc 2.6.1 implementation on
x86-64 (core 2) is 30% faster (from 0.270917s to 0.188079s)
llvm-svn: 41479
(constants are still not handled). Adds ConvertActions
to control fp-to-fp conversions (these are currently
defaulted for all other targets, so no changes there).
llvm-svn: 40958
Last x87 bits for full functionality (not
thoroughly tested, and long doubles do not work
in SSE modes at all - use -mcpu=i486 for now)
llvm-svn: 40886
Generalize isPSHUFDMask and add a unary SHUFPD pattern so that SHUFPD's
memory operand alignment can be tested as well, with a fix to avoid
breaking MMX's use of isPSHUFDMask.
llvm-svn: 40756
Make the alignedload and alignedstore patterns always require 16-byte
alignment. This way when they are used in the "Fs" instructions, in which
a vector instruction is used for a scalar purpose, they can still require
the full vector alignment. And add a regression test for this.
llvm-svn: 40555
This patch fills the last necessary bits to enable exceptions
handling in LLVM. Currently only on x86-32/linux.
In fact, this patch adds necessary intrinsics (and their lowering) which
represent really weird target-specific gcc builtins used inside unwinder.
After corresponding llvm-gcc patch will land (easy) exceptions should be
more or less workable. However, exceptions handling support should not be
thought as 'finished': I expect many small and not so small glitches
everywhere.
llvm-svn: 39855
in addition to the intrinsic forms. Add spill-folding entries for these new
instructions, and for the scalar min and max instrinsic instructions which
were missing. And add some preliminary ISelLowering code for using the new
non-intrinsic vector sqrt instruction, and fneg and fabs.
llvm-svn: 38478
extended vector types. Remove the special SDNode opcodes used for pre-legalize
vector operations, and the special MVT::Vector type used with them. Adjust
lowering and legalize to work with the normal SDNode kinds instead, and to
use the normal MVT functions to work with vector types instead of using the
two special operands that the pre-legalize nodes held.
This allows pre-legalize and post-legalize DAGs, and the code that operates
on them, to be more consistent. Pre-legalize vector operators can be handled
more consistently with scalar operators. And, -view-dag-combine1-dags and
-view-legalize-dags now look prettier for vector code.
llvm-svn: 37719
TargetLowering to SelectionDAG so that they have more convenient
access to the current DAG, in preparation for the ValueType routines
being changed from standalone functions to members of SelectionDAG for
the pre-legalize vector type changes.
llvm-svn: 37704
1. x86 backend rejected (&gv+c) for the 'i' constraint when in static mode.
2. the matcher didn't correctly reject and accept some global addresses.
the right predicate is GVRequiresExtraLoad, not "relomodel = pic".
llvm-svn: 36670
vector_shuffle v1, v2, <2, 6, 3, 7>
I.e.
vector_shuffle v, undef, <2, 2, 3, 3>
MMX only has a shuffle for v4i16 vectors. It needs to use the unpackh for
this type of operation.
llvm-svn: 36403
getRegClassForInlineAsmConstraint to being handled by
getRegForInlineAsmConstraint. This allows us to let the llvm register allocator
allocate, which gives us better code. For example, X86/2007-01-29-InlineAsm-ir.ll
used to compile to:
_run_init_process:
subl $4, %esp
movl %ebx, (%esp)
xorl %ebx, %ebx
movl $11, %eax
movl %ebx, %ecx
movl %ebx, %edx
# InlineAsm Start
push %ebx ; movl %ebx,%ebx ; int $0x80 ; pop %ebx
# InlineAsm End
Now we get:
_run_init_process:
xorl %ecx, %ecx
movl $11, %eax
movl %ecx, %edx
# InlineAsm Start
push %ebx ; movl %ecx,%ebx ; int $0x80 ; pop %ebx
# InlineAsm End
llvm-svn: 35804
Capture this so that downstream zext/sext's are optimized out. This
compiles:
int test(short X) { return (int)X; }
to:
_test:
movl %edi, %eax
ret
instead of:
_test:
movswl %di, %eax
ret
GCC produces this bizarre code:
_test:
movw %di, -12(%rsp)
movswl -12(%rsp),%eax
ret
llvm-svn: 34623
result value stuff. This eliminates a bunch of duplicated code and now
GetRetValueLocs is the sole place that decides where a value is returned.
llvm-svn: 34588
function. This function now uses GetRetValueLocs to determine *where*
the result values are located and concerns itself with *how* to pull the
values out.
llvm-svn: 34586
registers out from the logic of *how* to return them.
This changes X86-64 to mark EAX live out when returning a 32-bit value,
where before it marked RAX liveout.
llvm-svn: 34582
Add implicit uses of EBX to calls to ensure liveintervalanalysis does not treat
the GOT in EBX move as dead upon definition.
This should fix PR1207.
llvm-svn: 34470
1. New parameter attribute called 'inreg'. It has meaning "place this
parameter in registers, if possible". This is some generalization of
gcc's regparm(n) attribute. It's currently used only in X86-32 backend.
2. Completely rewritten CC handling/lowering code inside X86 backend.
Merged stdcall + c CCs and fastcall + fast CC.
3. Dropped CSRET CC. We cannot add struct return variant for each
target-specific CC (e.g. stdcall + csretcc and so on).
4. Instead of CSRET CC introduced 'sret' parameter attribute. Setting in
on first attribute has meaning 'This is hidden pointer to structure
return. Handle it gently'.
5. Fixed small bug in llvm-extract + add new feature to
FunctionExtraction pass, which relinks all internal-linkaged callees
from deleted function to external linkage. This will allow further
linking everything together.
NOTEs: 1. Documentation will be updated soon.
2. llvm-upgrade should be improved to translate csret => sret.
Before this, there will be some unexpected test fails.
llvm-svn: 33597
* PIC-aware internal structures in X86 Codegen have been refactored
* Visibility (default/weak) has been added
* Docs fixes (external weak linkage, visibility, formatting)
llvm-svn: 33136
or'ing in the sign bit of operand 1.
- Tweaking: rather than left shift the sign bit, fp_extend operand 1 first
before taking its sign bit if its type is smaller than that of operand 0.
llvm-svn: 32932
- New target type "mingw" was introduced
- Same things for both mingw & cygwin are marked as "cygming" (as in
gcc)
- .lcomm is supported here, so allow LLVM to use it
- Correctly use underscored versions of setjmp & _longjmp for both mingw
& cygwin
llvm-svn: 32833
Three changes:
1. Convert signed integer types to signless versions.
2. Implement the @sext and @zext parameter attributes. Previously the
type of an function parameter was used to determine whether it should
be sign extended or zero extended before the call. This information is
now communicated via the function type's parameter attributes.
3. The interface to LowerCallTo had to be changed in order to accommodate
the parameter attribute information. Although it would have been
convenient to pass in the FunctionType itself, there isn't always one
present in the caller. Consequently, a signedness indication for the
result type and for each parameter was provided for in the interface
to this method. All implementations were changed to make the adjustment
necessary.
llvm-svn: 32788
take v4f32 / v2f64 operands and may end up causing larger spills / restores.
Added X86 specific nodes X86ISD::FMAX, X86ISD::FMIN instead.
This fixes PR996.
llvm-svn: 31645
shuffle v, undef, <2, ?, 3, ?>
to movhlps
It should match to unpckhps instead.
Added proper matching code for
shuffle v, undef, <2, 3, 2, 3>
llvm-svn: 31519
Turn on -Wunused and -Wno-unused-parameter. Clean up most of the resulting
fall out by removing unused variables. Remaining warnings have to do with
unused functions (I didn't want to delete code without review) and unused
variables in generated code. Maintainers should clean up the remaining
issues when they see them. All changes pass DejaGnu tests and Olden.
llvm-svn: 31380
2. Added partial debug support for mingw\cygwin targets (the same as
Linux\ELF). Please note, that currently mingw\cygwin uses 'stabs' format
for storing debug info by default, thus many (runtime) libraries has
this information included. These formats shouldn't be mixed in one binary
('stabs' & 'DWARF'), otherwise binutils tools will be confused.
llvm-svn: 31311
DLL* linkages got full (I hope) codegeneration support in C & both x86
assembler backends.
External weak linkage added for future use, we don't provide any
codegeneration, etc. support for it.
llvm-svn: 30374
shuffle V1, <undef>, <undef, undef, 4, 5>
- Fix some suspicious logic into LowerVectorShuffle that cause less than
optimal code by failing to identify MOVL (move to lowest element of a
vector).
llvm-svn: 30171
using test, which provides nice simplifications like:
- movl %edi, %ecx
- andl $2, %ecx
- cmpl $0, %ecx
+ testl $2, %edi
je LBB1_11 #cond_next90
There are a couple of dagiselemitter deficiencies that this exposes, they will
be handled later.
llvm-svn: 30156
in the start of an array and a count of operands where applicable. In many
cases, the number of operands is known, so this static array can be allocated
on the stack, avoiding the heap. In many other cases, a SmallVector can be
used, which has the same benefit in the common cases.
I updated a lot of code calling getNode that takes a vector, but ran out of
time. The rest of the code should be updated, and these methods should be
removed.
We should also do the same thing to eliminate the methods that take a
vector of MVT::ValueTypes.
It would be extra nice to convert the dagiselemitter to avoid creating vectors
for operands when calling getTargetNode.
llvm-svn: 29566
The CFE refers to all single-register constraints (like "A") by their 16-bit
name, even though the 8 or 32-bit version of the register may be needed.
The X86 backend should realize what is going on and redecode the name back
to its proper form.
llvm-svn: 29420
x86 and ppc for 100% dense switch statements when relocations are non-PIC.
This support will be extended and enhanced in the coming days to support
PIC, and less dense forms of jump tables.
llvm-svn: 27947
movd always clear the top 96 bits and movss does so when it's loading the
value from memory.
The net result is codegen for 4-wide shuffles is much improved. It is near
optimal if one or more elements is a zero. e.g.
__m128i test(int a, int b) {
return _mm_set_epi32(0, 0, b, a);
}
compiles to
_test:
movd 8(%esp), %xmm1
movd 4(%esp), %xmm0
punpckldq %xmm1, %xmm0
ret
compare to gcc:
_test:
subl $12, %esp
movd 20(%esp), %xmm0
movd 16(%esp), %xmm1
punpckldq %xmm0, %xmm1
movq %xmm1, %xmm0
movhps LC0, %xmm0
addl $12, %esp
ret
or icc:
_test:
movd 4(%esp), %xmm0 #5.10
movd 8(%esp), %xmm3 #5.10
xorl %eax, %eax #5.10
movd %eax, %xmm1 #5.10
punpckldq %xmm1, %xmm0 #5.10
movd %eax, %xmm2 #5.10
punpckldq %xmm2, %xmm3 #5.10
punpckldq %xmm3, %xmm0 #5.10
ret #5.10
There are still room for improvement, for example the FP variant of the above example:
__m128 test(float a, float b) {
return _mm_set_ps(0.0, 0.0, b, a);
}
_test:
movss 8(%esp), %xmm1
movss 4(%esp), %xmm0
unpcklps %xmm1, %xmm0
xorps %xmm1, %xmm1
movlhps %xmm1, %xmm0
ret
The xorps and movlhps are unnecessary. This will require post legalizer optimization to handle.
llvm-svn: 27939
to a vector shuffle.
- VECTOR_SHUFFLE lowering change in preparation for more efficient codegen
of vector shuffle with zero (or any splat) vector.
llvm-svn: 27875
- Normalize shuffle nodes so result vector lower half elements come from the
first vector, the rest come from the second vector. (Except for the
exceptions :-).
- Other minor fixes.
llvm-svn: 27474
vector_shuffle v1, v1, <0, 4, 1, 5, 2, 6, 3, 7>
This is turned into
vector_shuffle v1, <undef>, <0, 0, 1, 1, 2, 2, 3, 3>
by dag combiner.
It would match a {p}unpckl on x86.
llvm-svn: 27437
Use pshufd, pshuhw, and pshulw to shuffle v4f32 if shufps doesn't match.
Use shufps to shuffle v4f32 if pshufd, pshuhw, and pshulw don't match.
llvm-svn: 27259
manner that the LowerSwitch LLVM to LLVM pass does: emitting a binary
search tree of basic blocks. The new approach has several advantages:
it is faster, it generates significantly smaller code in many cases, and
it paves the way for implementing dense switch tables as a jump table by
handling switches directly in the instruction selector.
This functionality is currently only enabled on x86, but should be safe for
every target. In anticipation of making it the default, the cfg is now
properly updated in the x86, ppc, and sparc select lowering code.
llvm-svn: 27156
Make the PPC backend not dependent on BRTWOWAY_CC and make the branch
selector smarter about the code it generates, fixing a case in the
readme.
llvm-svn: 26814
rep/stos and rep/mov if the count is not a constant. We could do
rep/stosl; and $count, 3; rep/stosb
For now, I will lower them to memset / memcpy calls. We will revisit this after
a little bit experiment.
Also need to take care of the trailing bytes even if the count is a constant.
Since the max. number of trailing bytes are 3, we will simply issue loads /
stores.
llvm-svn: 26517
and ExternalSymbol.
- Use C++ code (rather than tblgen'd selection code) to match the above
mentioned leaf nodes. Do not mutate and nodes and do not record the
selection in CodeGenMap. These nodes should be safe to duplicate. This is
a performance win.
llvm-svn: 26335
dynamic-no-pic, and default.
PPC and x86 default is dynamic-no-pic for Darwin, pic for others.
- Removed options -enable-pic and -ppc-static.
llvm-svn: 26315
Turns them into calls to memset / memcpy if 1) buffer(s) are not DWORD aligned,
2) size is not known to be greater or equal to some minimum value (currently 128).
llvm-svn: 26224
* Allow a register node as SelectAddr() base.
* ExternalSymbol -> TargetExternalSymbol as direct function callee.
* Use X86::ESP register rather than CopyFromReg(X86::ESP) as stack ptr for
call parmater passing.
llvm-svn: 25207
for Darwin.
* Added lowering hook for ISD::RET. It inserts CopyToRegs for the return
value (or store / fld / copy to ST(0) for floating point value). This
eliminate the need to write C++ code to handle RET with variable number
of operands.
llvm-svn: 24888
Dan Gohman