MatchBSwap has most of the functionality to match bit reversals already. If we switch it from looking at bytes to individual bits and remove a few early exits, we can extend the main recursive function to match any sequence of ORs, ANDs and shifts that assemble a value from different parts of another, base value. Once we have this bit->bit mapping, we can very simply detect if it is appropriate for a bswap or bitreverse.
llvm-svn: 255334
This is a redo of r255137 (reverted at r255227) which was a redo of
r255124 (reverted at r255126) with a fixed check for a scalar source
type and an added test for the failure that caused the revert.
Original commit message:
Example:
bitcast (extractelement (bitcast <2 x float> %X to <2 x i32>), 1) to float
--->
extractelement <2 x float> %X, i32 1
This is part of fixing PR25543:
https://llvm.org/bugs/show_bug.cgi?id=25543
The next step will be to generalize this fold:
trunc ( lshr ( bitcast X) ) -> extractelement (X)
Ie, I'm hoping to replace the existing transform of:
bitcast ( trunc ( lshr ( bitcast X)))
added by:
http://reviews.llvm.org/rL112232
with 2 less specific transforms to catch the case in the bug report.
Differential Revision: http://reviews.llvm.org/D14879
llvm-svn: 255261
Added some missing spaces between the module identifier and the start of
the debug message. Also added a ":" after the module identifier to make
this look a little nicer.
llvm-svn: 255259
We extend the search for redundant stores to predecessor blocks that
unconditionally lead to the block BB with the current store instruction. That
also includes single-block loops that unconditionally lead to BB, and
if-then-else blocks where then- and else-blocks unconditionally lead to BB.
http://reviews.llvm.org/D13363
Patch by Ivan Baev <ibaev@codeaurora.org>!
llvm-svn: 255247
Summary:
LAA uses the PredicatedScalarEvolution interface, so it can produce
forward/backward dependences having SCEVs that are AddRecExprs only after being
transformed by PredicatedScalarEvolution.
Use PredicatedScalarEvolution to get the expected expressions.
Reviewers: anemet
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D15382
llvm-svn: 255241
- This simplifies the CallSite class, arg_begin / arg_end are now
simple wrapper getters.
- In several places, we were creating CallSite instances solely to call
arg_begin and arg_end. With this change, that's no longer required.
llvm-svn: 255226
`CloneAndPruneIntoFromInst` can DCE instructions after cloning them into
the new function, and so an AssertingVH is too strong. This change
switches CloneCodeInfo to use a std::vector<WeakVH>.
llvm-svn: 255148
This is a redo of r255124 (reverted at r255126) with an added check for a
scalar destination type and an added test for the failure seen in Clang's
test/CodeGen/vector.c. The extra test shows a different missing optimization.
Original commit message:
Example:
bitcast (extractelement (bitcast <2 x float> %X to <2 x i32>), 1) to float
--->
extractelement <2 x float> %X, i32 1
This is part of fixing PR25543:
https://llvm.org/bugs/show_bug.cgi?id=25543
The next step will be to generalize this fold:
trunc ( lshr ( bitcast X) ) -> extractelement (X)
Ie, I'm hoping to replace the existing transform of:
bitcast ( trunc ( lshr ( bitcast X)))
added by:
http://reviews.llvm.org/rL112232
with 2 less specific transforms to catch the case in the bug report.
Differential Revision: http://reviews.llvm.org/D14879
llvm-svn: 255137
The bug in IndVarSimplify was fixed in r254976, r254977, so I'm
reapplying the original patch for avoiding redundant LCSSA recomputation.
This reverts commit ffe3b434e505e403146aff00be0c177bb6d13466.
llvm-svn: 255133
This new patch fixes a few bugs that exposed in last submit. It also improves
the test cases.
--Original Commit Message--
This patch implements a minimum spanning tree (MST) based instrumentation for
PGO. The use of MST guarantees minimum number of CFG edges getting
instrumented. An addition optimization is to instrument the less executed
edges to further reduce the instrumentation overhead. The patch contains both the
instrumentation and the use of the profile to set the branch weights.
Differential Revision: http://reviews.llvm.org/D12781
llvm-svn: 255132
Example:
bitcast (extractelement (bitcast <2 x float> %X to <2 x i32>), 1) to float
--->
extractelement <2 x float> %X, i32 1
This is part of fixing PR25543:
https://llvm.org/bugs/show_bug.cgi?id=25543
The next step will be to generalize this fold:
trunc ( lshr ( bitcast X) ) -> extractelement (X)
Ie, I'm hoping to replace the existing transform of:
bitcast ( trunc ( lshr ( bitcast X)))
added by:
http://reviews.llvm.org/rL112232
with 2 less specific transforms to catch the case in the bug report.
Differential Revision: http://reviews.llvm.org/D14879
llvm-svn: 255124
ScalarEvolution.h, in order to avoid cyclic dependencies between the Transform
and Analysis modules:
[LV][LAA] Add a layer over SCEV to apply run-time checked knowledge on SCEV expressions
Summary:
This change creates a layer over ScalarEvolution for LAA and LV, and centralizes the
usage of SCEV predicates. The SCEVPredicatedLayer takes the statically deduced knowledge
by ScalarEvolution and applies the knowledge from the SCEV predicates. The end goal is
that both LAA and LV should use this interface everywhere.
This also solves a problem involving the result of SCEV expression rewritting when
the predicate changes. Suppose we have the expression (sext {a,+,b}) and two predicates
P1: {a,+,b} has nsw
P2: b = 1.
Applying P1 and then P2 gives us {a,+,1}, while applying P2 and the P1 gives us
sext({a,+,1}) (the AddRec expression was changed by P2 so P1 no longer applies).
The SCEVPredicatedLayer maintains the order of transformations by feeding back
the results of previous transformations into new transformations, and therefore
avoiding this issue.
The SCEVPredicatedLayer maintains a cache to remember the results of previous
SCEV rewritting results. This also has the benefit of reducing the overall number
of expression rewrites.
Reviewers: mzolotukhin, anemet
Subscribers: jmolloy, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14296
llvm-svn: 255122
Summary:
This change creates a layer over ScalarEvolution for LAA and LV, and centralizes the
usage of SCEV predicates. The SCEVPredicatedLayer takes the statically deduced knowledge
by ScalarEvolution and applies the knowledge from the SCEV predicates. The end goal is
that both LAA and LV should use this interface everywhere.
This also solves a problem involving the result of SCEV expression rewritting when
the predicate changes. Suppose we have the expression (sext {a,+,b}) and two predicates
P1: {a,+,b} has nsw
P2: b = 1.
Applying P1 and then P2 gives us {a,+,1}, while applying P2 and the P1 gives us
sext({a,+,1}) (the AddRec expression was changed by P2 so P1 no longer applies).
The SCEVPredicatedLayer maintains the order of transformations by feeding back
the results of previous transformations into new transformations, and therefore
avoiding this issue.
The SCEVPredicatedLayer maintains a cache to remember the results of previous
SCEV rewritting results. This also has the benefit of reducing the overall number
of expression rewrites.
Reviewers: mzolotukhin, anemet
Subscribers: jmolloy, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14296
llvm-svn: 255115
loading the source Module, linking the function in the destination
module, and destroying the source Module before repeating with the
next function to import (potentially from the same Module).
Ideally we would keep the source Module alive and import the next
Function needed from this Module. Unfortunately this is not possible
because the linker does not leave it in a usable state.
However we can do better by first computing the list of all candidates
per Module, and only then load the source Module and import all the
function we need for it.
The trick to process callees is to materialize function in the source
module when building the list of function to import, and inspect them
in their source module, collecting the list of callees for each
callee.
When we move the the actual import, we will import from each source
module exactly once. Each source module is loaded exactly once.
The only drawback it that it requires to have all the lazy-loaded
source Module in memory at the same time.
Currently this patch already improves considerably the link time,
a multithreaded link of llvm-dis on my laptop was:
real 1m12.175s user 6m32.430s sys 0m10.529s
and is now:
real 0m40.697s user 2m10.237s sys 0m4.375s
Note: this is the full link time (linker+Import+Optimizer+CodeGen)
Differential Revision: http://reviews.llvm.org/D15178
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255100
For an invoke with operand bundles, the [op_begin(), op_end()-3] range
can contain things other than invoke arguments. This change teaches
PruneEH to use arg_begin() and arg_end() explicitly.
llvm-svn: 255073
This patch teaches the fully redundant load part of EarlyCSE how to forward from atomic and volatile loads and stores, and how to eliminate unordered atomics (only). This patch does not include dead store elimination support for unordered atomics, that will follow in the near future.
The basic idea is that we allow all loads and stores to be tracked by the AvailableLoad table. We store a bit in the table which tracks whether load/store was atomic, and then only replace atomic loads with ones which were also atomic.
No attempt is made to refine our handling of ordered loads or stores. Those are still treated as full fences. We could pretty easily extend the release fence handling to release stores, but that should be a separate patch.
Differential Revision: http://reviews.llvm.org/D15337
llvm-svn: 255054
The StringRef constructor is unnecessary (since we're converting to
std::string anyway), and having it requires an explicit call to
StringRef's or std::string's constructor.
llvm-svn: 255000
Summary:
Also add a stricter post-condition for IndVarSimplify.
Fixes PR25578. Test case by Michael Zolotukhin.
Reviewers: hfinkel, atrick, mzolotukhin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15059
llvm-svn: 254977
254950 ended up being not NFC. The previous code was overriding the flags for whether an instruction read or wrote memory using the target specific flags returned via TTI. I'd missed this in my refactoring. Since I mistakenly built only x86 and didn't notice the number of unsupported tests, I didn't catch that before the original checkin.
This raises an interesting issue though. Given we have function attributes (i.e. readonly, readnone, argmemonly) which describe the aliasing of intrinsics, why does TTI have this information overriding the instruction definition at all? I see no reason for this, but decided to preserve existing behavior for the moment. The root issue might be that we don't have a "writeonly" attribute.
Original commit message:
[EarlyCSE] Simplify and invert ParseMemoryInst [NFCI]
Restructure ParseMemoryInst - which was introduced to abstract over target specific load and stores instructions - to just query the underlying instructions. In theory, this could be slightly slower than caching the results, but in practice, it's very unlikely to be measurable.
The simple query scheme makes it far easier to understand, and much easier to extend with new queries. Given I'm about to need to add new query types, doing the cleanup first seemed worthwhile.
Do we still believe the target specific intrinsic handling is worthwhile in EarlyCSE? It adds quite a bit of complexity and makes the code harder to read. Being able to delete the abstraction entirely would be wonderful.
llvm-svn: 254957
Restructure ParseMemoryInst - which was introduced to abstract over target specific load and stores instructions - to just query the underlying instructions. In theory, this could be slightly slower than caching the results, but in practice, it's very unlikely to be measurable.
The simple query scheme makes it far easier to understand, and much easier to extend with new queries. Given I'm about to need to add new query types, doing the cleanup first seemed worthwhile.
Do we still believe the target specific intrinsic handling is worthwhile in EarlyCSE? It adds quite a bit of complexity and makes the code harder to read. Being able to delete the abstraction entirely would be wonderful.
llvm-svn: 254950
Summary:
Add a field on the PassManagerBuilder that clang or gold can use to pass
down a pointer to the function index in memory to use for importing when
the ThinLTO backend is triggered. Add support to supply this to the
function import pass.
Reviewers: joker.eph, dexonsmith
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D15024
llvm-svn: 254926
Summary:
There are `SelectPatternFlavor`s that don't represent min or max idioms,
and we should not be passing those to `getCmpPredicateForMinMax`.
Fixes PR25745.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15249
llvm-svn: 254869
Summary: If the same pass manager is used for multiple modules ASAN
complains about GlobalsMD being initialized twice. Fix this by
resetting GlobalsMD in a new doFinalization method to allow this
use case.
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14962
llvm-svn: 254851
When the notion of target specific memory intrinsics was introduced to EarlyCSE, the commit confused the notions of volatile and simple memory access. Since I'm about to start working on this area, cleanup the naming so that patches aren't horribly confusing. Note that the actual implementation was always bailing if the load or store wasn't simple.
Reminder:
- "volatile" - C++ volatile, can't remove any memory operations, but in principal unordered
- "ordered" - imposes ordering constraints on other nearby memory operations
- "atomic" - can't be split or sheared. In LLVM terms, all "ordered" operations are also atomic so the predicate "isAtomic" is often used.
- "simple" - a load which is none of the above. These are normal loads and what most of the optimizer works with.
llvm-svn: 254805
Summary:
In order to avoid calling pow function we generate repeated fmul when n is a
positive or negative whole number.
For each exponent we pre-compute Addition Chains in order to minimize the no.
of fmuls.
Refer: http://wwwhomes.uni-bielefeld.de/achim/addition_chain.html
We pre-compute addition chains for exponents upto 32 (which results in a max of
7 fmuls).
For eg:
4 = 2+2
5 = 2+3
6 = 3+3 and so on
Hence,
pow(x, 4.0) ==> y = fmul x, x
x = fmul y, y
ret x
For negative exponents, we simply compute the reciprocal of the final result.
Note: This transformation is only enabled under fast-math.
Patch by Mandeep Singh Grang <mgrang@codeaurora.org>
Reviewers: weimingz, majnemer, escha, davide, scanon, joerg
Subscribers: probinson, escha, llvm-commits
Differential Revision: http://reviews.llvm.org/D13994
llvm-svn: 254776
For PowerPC64 we cannot just pass SP extracted from @llvm.stackrestore to
_asan_allocas_unpoison due to specific ABI requirements
(http://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi.html#DYNAM-STACK).
This patch adds the value returned by @llvm.get.dynamic.area.offset to
extracted from @llvm.stackrestore stack pointer, so dynamic allocas unpoisoning
stuff would work correctly on PowerPC64.
Patch by Max Ostapenko.
Differential Revision: http://reviews.llvm.org/D15108
llvm-svn: 254707
time.
The new overloaded function is used when an attribute is added to a
large number of slots of an AttributeSet (for example, to function
parameters). This is much faster than calling AttributeSet::addAttribute
once per slot, because AttributeSet::getImpl (which calls
FoldingSet::FIndNodeOrInsertPos) is called only once per function
instead of once per slot.
With this commit, clang compiles a file which used to take over 22
minutes in just 13 seconds.
rdar://problem/23581000
Differential Revision: http://reviews.llvm.org/D15085
llvm-svn: 254491
For efficiency reason, when importing multiple functions for the same Module,
we can avoid reparsing it every time.
Differential Revision: http://reviews.llvm.org/D15102
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 254486
When linking static archive, there is no individual module files to
load. Instead they can be mmap'ed and could be initialized from a
buffer directly. The callback provide flexibility to override the
scheme for loading module from the summary.
Differential Revision: http://reviews.llvm.org/D15101
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 254479
The difference is that now we don't error on out-of-comdat access to
internal global values. We copy them instead. This seems to match the
expectation of COFF linkers (see pr25686).
Original message:
Start deciding earlier what to link.
A traditional linker is roughly split in symbol resolution and
"copying
stuff".
The two tasks are badly mixed in lib/Linker.
This starts splitting them apart.
With this patch there are no direct call to linkGlobalValueBody or
linkGlobalValueProto. Everything is linked via WapValue.
This also includes a few fixes:
* A GV goes undefined if the comdat is dropped (comdat11.ll).
* We error if an internal GV goes undefined (comdat13.ll).
* We don't link an unused comdat.
The first two match the behavior of an ELF linker. The second one is
equivalent to running globaldce on the input.
llvm-svn: 254418
The current code does not take alloca array size into account and,
as a result, considers any access past the first array element to be
unsafe.
llvm-svn: 254350
A traditional linker is roughly split in symbol resolution and "copying
stuff".
The two tasks are badly mixed in lib/Linker.
This starts splitting them apart.
With this patch there are no direct call to linkGlobalValueBody or
linkGlobalValueProto. Everything is linked via WapValue.
This also includes a few fixes:
* A GV goes undefined if the comdat is dropped (comdat11.ll).
* We error if an internal GV goes undefined (comdat13.ll).
* We don't link an unused comdat.
The first two match the behavior of an ELF linker. The second one is
equivalent to running globaldce on the input.
llvm-svn: 254336
This one is enabled only under -ffast-math. There are cases where the
difference between the value computed and the correct value is huge
even for ffast-math, e.g. as Steven pointed out:
x = -1, y = -4
log(pow(-1), 4) = 0
4*log(-1) = NaN
I checked what GCC does and apparently they do the same optimization
(which result in the dramatic difference). Future work might try to
make this (slightly) less worse.
Differential Revision: http://reviews.llvm.org/D14400
llvm-svn: 254263
This fixes buildbots in systems that std::to_string is not present. It
also tidies the output of the diagnostic to render doubles a bit better
(thanks Ben Kramer for help with string streams and format).
llvm-svn: 254261
This adds two thresholds to the sample profiler to affect inlining
decisions: the concept of global hotness and coldness.
Functions that have accumulated more than a certain fraction of samples at
runtime, are annotated with the InlineHint attribute. Conversely,
functions that accumulate less than a certain fraction of samples, are
annotated with the Cold attribute.
This is very similar to the hints emitted by Clang when using
instrumentation profiles.
Notice that this is a very blunt instrument. A function may have
globally collected a significant fraction of samples, but that does not
necessarily mean that every callsite for that function is hot.
Ideally, we would annotate each callsite with the samples collected at
that callsite. This way, the inliner can incorporate all these weights
into its cost model.
Once the inliner offers this functionality, we can change the hints
emitted here to a more precise per-callsite annotation. For now, this is
providing some measure of speedups with our internal benchmarks. I've
observed speedups of up to 23% (though the geo mean is about 3%). I expect
these numbers to improve as the inliner gets better annotations.
llvm-svn: 254212
Based on testing of internal benchmarks, I'm lowering this threshold to
a value of 0.1%. This means that SamplePGO will respect 99.9% of the
original inline decisions when following a profile.
The performance difference is noticeable in some tests. With the
previous threshold, the speedups over baseline -O2 was about 0.63%. With
the new default, the speedups are around 3% on average.
The point of this threshold is not to do more aggressive inlining. When
an inlined callsite crosses this threshold, SamplePGO will redo the
inline decision so that it can better apply the input profile.
By respecting most original inline decisions, we can apply more of the
input profile because the shape of the code follows the profile more
closely.
In the next series, I'll be looking at adding some inline hints for the
cold callsites and for toplevel functions that are hot/cold as well.
llvm-svn: 254211
Now the ValueMapper has two callbacks. The first one maps the
declaration. The ValueMapper records the mapping and then materializes
the body/initializer.
llvm-svn: 254209
This patch changes the DFSan instrumentation for aarch64 to instead
of using fixes application mask defined by SANITIZER_AARCH64_VMA
to read the application shadow mask value from compiler-rt. The value
is initialized based on runtime VAM detection.
Along with this patch a compiler-rt one will also be added to export
the shadow mask variable.
llvm-svn: 254196
The order in which instructions are truncated in truncateToMinimalBitwidths
effects code generation. Switch to a map with a determinisic order, since the
iteration order over a DenseMap is not defined.
This code is not hot, so the difference in container performance isn't
interesting.
Many thanks to David Blaikie for making me aware of MapVector!
Fixes PR25490.
Differential Revision: http://reviews.llvm.org/D14981
llvm-svn: 254179
They are as much trouble as aliases to declarations. They are requiring
the code generator to define a symbol with the same value as another
symbol, but the second symbol is undefined.
If representing this is important for some optimization, we could add
support for available_externally aliases. They would be *required* to
point to a declaration (or available_externally definition).
llvm-svn: 254170
Add a simple initial heuristic to control importing based on the number
of instructions recorded in the function's summary. Add option to
control the limit, and test using option.
llvm-svn: 254036
When the original binary is executed and sampled, the resulting profile
contains information on the original inline stack. We currently follow
the original inline plan if we notice that the inlined callsite has more
than 0 samples to it.
A better way is to determine whether the callsite is actually worth
inlining. If the callsite accumulates a small fraction of the samples
spent in the parent function, then we don't want to bother inlining it
(as it means that the callsite is actually cold).
This patch introduces a threshold expressed in percentage of samples
in relation to the parent function. If the callsite uses less than N%
of the total samples used by its parent, the original inline decision is
not re-applied.
I've set the threshold to the very arbitrary value of 5%. I'm yet to do
any actual experiments to see what's a good value. I wanted to separate
the basic mechanism from the tuning.
llvm-svn: 254034
This patch implements a minimum spanning tree (MST) based instrumentation for
PGO. The use of MST guarantees minimum number of CFG edges getting
instrumented. An addition optimization is to instrument the less executed
edges to further reduce the instrumentation overhead. The patch contains both the
instrumentation and the use of the profile to set the branch weights.
Differential Revision: http://reviews.llvm.org/D12781
llvm-svn: 254021
Analyze imported function bodies and add any new external calls to
the worklist for importing. Currently no controls on the importing
so this will end up importing everything possible in the call tree
below the importing module. Basic profitability checks coming next.
Update test to check for iteratively inlined functions.
llvm-svn: 254011
Summary:
Followed the guidelines in:
http://llvm.org/docs/CodingStandards.html#include-style
However, I noticed that uppercase named headers come before lowercase ones
throughout the codebase. So kept them as is.
Patch by Mandeep Singh Grang <mgrang@codeaurora.org>
Reviewers: majnemer, davide, jmolloy, atrick
Subscribers: sanjoy
Differential Revision: http://reviews.llvm.org/D14939
llvm-svn: 254005
Skip imports for weak_any aliases as well. Fix the test to check
non-import of weak aliases and functions, and import of normal alias.
llvm-svn: 253991
Summary:
This is a helper to perform cross-module import for ThinLTO. Right now
it is importing naively every possible called functions.
Reviewers: tejohnson
Subscribers: dexonsmith, llvm-commits
Differential Revision: http://reviews.llvm.org/D14914
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 253954
The existing coverage tracker counts the number of records that were used
from the input profile. An alternative view of coverage is to check how
many available samples were applied.
This way, if the profile contains several records with few samples, it
doesn't really matter much that they were not applied. The more
interesting records to apply are the ones that contribute many samples.
llvm-svn: 253912
James Molloy