Trying to reduce the number of masked loads in favour of more unpklo/hi
instructions. Both ISD::ZEXTLOAD and ISD::SEXTLOAD are supported to extensions
from legal types.
Both of normal and masked loads test cases added to guard compile crash.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D120953
Add shl/srl/sra to the list of ops that we canonicalize with a select to expose an identity merge
Differential Revision: https://reviews.llvm.org/D122070
ComputePHILiveOutRegInfo assumes that constant incoming values to
Phis will be zero extended if they aren't a legal type. To guarantee
that we should zero_extend rather than any_extend constants.
This fixes a bug for RISCV where any_extend of constants can be
treated as a sign_extend.
Differential Revision: https://reviews.llvm.org/D122053
Fixes llvm-clang-x86_64-expensive-checks-debian failure with 2f497ec3.
expandAtomicStore always modifies the function, so make sure we set
MadeChange unconditionally. Not sure how nobody else has stumbled over
this before.
When generating a all-one mask value whose bitwidth is larger than 64, signed extension should be used rather then zero extension.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D120865
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121736
This reverts commit c46aab01c0.
This evidently blocks compiling in some cases that used to work
before. I'm also not fully convinced this is the correct place to fix
this problem.
This patch adjusts what location is picked for a known variable value --
preferring to leave locations on the stack, even when a value is re-loaded
into a register. The benefit is reduced location list entropy, on a
clang-3.4 build I found that .debug_loclists reduces in size by 6%, from
29Mb down to 27Mb.
Testing: a few tests need the stack slot to be written to explicitly, to
force LiveDebugValues into restoring the variable location to a register.
I've added an explicit test for the desired behaviour in
livedebugvalues_recover_clobbers.mir .
Differential Revision: https://reviews.llvm.org/D120732
This fixes a reported bug that caused an infinite loop during the
SelectionDAG optimization phase in ISel, by creating an overridable hook
in `TargetLowering` that allows us to bail out from running
`SimplifyDemandedVectorElts`.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D121869
If we promote the ABS and then Expand in LegalizeDAG, then both the
sra and the xor will have their inputs sign extended. This generates
extra code on RISCV which lacks an i8 or i16 sign extend instructon.
If we expand during type legalization, then only the sra will get its
input sign extended. RISCV is able to combine this with the sra by
doing a shift left followed by an sra.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D121664
RISCV strong prefers i32 values be sign extended to i64. This combine
was always zero extending the constant using APInt methods.
This adjusts the code so that it calls getNode using ISD::ANY_EXTEND instead.
getNode will call TLI.isSExtCheaperThanZExt to decide how to handle
the constant.
Tests were copied from D121598 where I noticed that we were creating
constants that were hard to materialize.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D121650
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121327
The existing volatile checks only handle aliasing hazards between stores,
but that isn't enough since by that point volatile stores may have already
been added to the current candidate group.
Discussed extensively on D98232. The functionality introduced in D35816
never worked correctly. In D98232, it was fixed, but, as it was
introducing a large compile-time regression, and the value of the
original patch was called into doubt, we disabled it by default
everywhere. A year later, it appears that caused no grief, so it seems
safe to remove the disabled code.
This should be accompanied by re-opening bug 26810.
Differential Revision: https://reviews.llvm.org/D121128
We do not have general reassociation here (and probably
do not need it), but I noticed these were missing in
patches/tests motivated by D111530, so we can at
least handle the simplest patterns.
The VE test diff looks correct, but we miss that
pattern in IR currently:
https://alive2.llvm.org/ce/z/u66_PM
`DIE::getUnitDie` looks up parent DIE until compile unit or type unit is found. However for skeleton CU with debug fission, we would have DW_TAG_skeleton_unit instead of DW_TAG_compile_unit as top level DIE.
This change fixes the look up so we can get DW_TAG_skeleton_unit as UnitDie for skeleton CU.
Differential Revision: https://reviews.llvm.org/D120610
This patch introduces two new experimental IR intrinsics and SDAG nodes
to represent vector strided loads and stores.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D114884
SDNodes with different target flags may now be folded together
rightfully resulting in the assertion in the refineAlignment.
Folding nodes with different target flags may result in the
wrong load instructions produced at least on the AMDGPU.
Fixes: SWDEV-326805
Differential Revision: https://reviews.llvm.org/D121335
This is another fold generalized from D111530.
We can find a common source for a rotate operation hidden inside an 'or':
https://alive2.llvm.org/ce/z/9pV8hn
Deciding when this is profitable vs. a funnel-shift is tricky, but this
does not show any regressions: if a target has a rotate but it does not
have a funnel-shift, then try to form the rotate here. That is why we
don't have x86 test diffs for the scalar tests that are duplicated from
AArch64 ( 74a65e3834 ) - shld/shrd are available. That also makes it
difficult to show vector diffs - the only case where I found a diff was
on x86 AVX512 or XOP with i64 elements.
There's an additional check for a legal type to avoid a problem seen
with x86-32 where we form a 64-bit rotate but then it gets split
inefficiently. We might avoid that by adding more rotate folds, but
I didn't check to see what is missing on that path.
This gets most of the motivating patterns for AArch64 / ARM that are in
D111530.
We still need a couple of enhancements to setcc pattern matching with
rotate/funnel-shift to get the rest.
Differential Revision: https://reviews.llvm.org/D120933
This was disabled in 2acea2786b as a
work-around for Issue #31491. I've reduced the test case from that bug
and confirmed that it is now fixed.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D120866
This relands commit 7313474319.
It failed on Windows/Mac because `-fjmc` is only checked for ELF targets.
Check the flag unconditionally instead and issue a warning for non-ELF targets.
Previously we used sra+add+xor if ADDCARRY is supported. This changes
to sra+xor+sub is SUBCARRY is available.
This is consistent with the recent change to the default expansion
in LegalizeDAG.
Differential Revision: https://reviews.llvm.org/D121039
The motivation is to enable the MSVC-style JMC instrumentation usable by a ELF-based
debugger. Since there is no prior experience implementing JMC feature for ELF-based
debugger, it might be better to just reuse existing MSVC-style JMC instrumentation.
For debuggers that support both ELF&COFF (like lldb), the JMC implementation might
be shared between ELF&COFF. If this is found to inadequate, it is pretty low-cost
switching to alternatives.
Implementation:
- The '-fjmc' is already a driver and cc1 flag. Wire it up for ELF in the driver.
- Refactor the JMC instrumentation pass a little bit.
- The ELF handling is different from MSVC in two places:
* the flag section name is ".just.my.code" instead of ".msvcjmc"
* the way default function is provided: MSVC uses /alternatename; ELF uses weak function.
Based on D118428.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D119910
When inserting undef into buildvectors created from shuffles of
buildvectors, we convert elements to the largest needed type. This had
the effect of converting undef into 0, which isn't needed as the
buildvector implicitly truncates and trunc(zext(undef)) == undef.
Differential Revision: https://reviews.llvm.org/D121002
This extends acb96ffd14 to 'and' and 'xor' opcodes.
Copying from that message:
LOGIC (LOGIC (SH X0, Y), Z), (SH X1, Y) --> LOGIC (SH (LOGIC X0, X1), Y), Z
https://alive2.llvm.org/ce/z/QmR9rR
This is a reassociation + factoring fold. The common shift operation is moved
after a bitwise logic op on 2 input operands.
We get simpler cases of these patterns in IR, but I suspect we would miss all
of these exact tests in IR too. We also handle the simpler form of this plus
several other folds in DAGCombiner::hoistLogicOpWithSameOpcodeHands().
When lowering LLVM-IR to instruction referencing stuff, if a value is
defined by a COPY, we try and follow the register definitions back to where
the value was defined, and build an instruction reference to that
instruction. In a few scenarios (such as arguments), this isn't possible.
I added some assertions to catch cases that weren't explicitly whitelisted.
Over the course of a few months, several more scenarios have cropped up,
the lastest is the llvm.read_register intrinsic, which lets LLVM-IR read an
arbitary register at any point. In the face of this, there's little point
in validating whether debug-info reads a register in an expected scenario.
Thus: this patch just deletes those assertions, and adds a regression test
to check that something is done with the llvm.read_register intrinsic.
Fixes#54190
Differential Revision: https://reviews.llvm.org/D121001
When triggered during operation legalisation the affected combine
generates a splat_vector that when custom lowered for SVE fixed
length code generation, results in the original precombine sequence
and thus we enter a legalisation/combine hang.
NOTE: The patch contains no tests because I observed this issue
only when combined with other work that might never become public.
The current way AArch64 lowers ISD::SPLAT_VECTOR meant a specific
test was not possible so I'm hoping the DAGCombiner fix can be seen
as obvious. The AArch64ISelLowering change is requirted to maintain
existing code quality.
Differential Revision: https://reviews.llvm.org/D120735
growRegion() does not scale in code with BBs with a very large number of edges.
In such code growRegion() becomes a compile-time bottleneck, consuming 60% of
the total compilation time.
This patch adds a limit to the complexity of growRegion() by incrementing a counter
in each iteration. We bail out once the limit is reached.
Differential Revision: https://reviews.llvm.org/D120752
https://alive2.llvm.org/ce/z/mJP7XP
This can be viewed as expanding the compare into and/or-of-compares:
https://alive2.llvm.org/ce/z/bkZYWE
followed by reduction of each compare.
This could be extended in several ways:
1. There's a (X & Y) == -1 sibling.
2. We can recurse through more than 1 'or'.
3. The fold could be generalized beyond rotates - any operation that
only changes the order of bits (bswap, bitreverse).
This is a transform noted in D111530.
Instead of emitting 0 > Hi, emit Hi < 0. If Hi needs to be expanded again
this will allow the special case for sign bit tests in ExpandIntOp_SETCC
to trigger.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D120761
Also, changes how the CSR loop is indexed, which should avoid bugs like the one fixed by rG4a57bb5a3b74bdad9b0518009a7d7ac7ca2ac650
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D120668
This is an alternative to D120330, which disables MachineSink for
functions with irreducible cycles entirely. This avoids both the
correctness problem, and ensures we don't perform non-profitable
sinks into cycles. At the same time, it may also disable
profitable sinks in the same function. This can be made more
precise by using MachineCycleInfo in the future.
Fixes https://github.com/llvm/llvm-project/issues/53990.
Differential Revision: https://reviews.llvm.org/D120800
Currently we only check for splat shuffles, this extends it to see if the source operand is a splat across the demanded elts based upon the shuffle mask
This patch adds support for recognising vector splats by peeking through bitcasts to vectors with smaller element types - if all the offset subelements are splats then the bitcasted vector is a splat as well.
We don't have great coverage for isSplatValue so I've made this pretty specific to the use case I'm trying to fix - regressions in some vXi64 vector shift by splat cases that 32-bit x86 doesn't recognise because the shift amount buildvector has been type legalised to v2Xi32.
We can add further support (floats, bitcast from larger element types, undef elements) when we have actual test coverage.
Differential Revision: https://reviews.llvm.org/D120553
This wraps up from D119053. The 2 headers are moved as described,
fixed file headers and include guards, updated all files where the old
paths were detected (simple grep through the repo), and `clang-format`-ed it all.
Differential Revision: https://reviews.llvm.org/D119876
If the types aren't legal, the expansions may get type legalized in a
different way preventing code sharing. If the type is legal, we will
share some instructions between the two expansions, but we will need an
extra register.
Since we don't appear to fold (neg (sub A, B)) if the sub has an
additional user, I think it makes sense not to expand NABS.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D120513
InstrRefBasedLDV allocates some big tables of ValueIDNum, to store live-in
and live-out block values in, that then get passed around as pointers
everywhere. This patch wraps the allocation in a std::unique_ptr, names
some types based on unique_ptr, and passes references to those around
instead. There's no functional change, but it makes it clearer to the
reader that references to these tables are borrowed rather than owned, and
we get some extra validity assertions too.
Differential Revision: https://reviews.llvm.org/D118774
This is the SDAG equivalent of an instcombine transform added with:
fd807601a7
This is another step towards solving #49541 and part of an alternative
set of more general transforms than what is proposed in D111530.
https://alive2.llvm.org/ce/z/ToxaE8
LOGIC (LOGIC (SH X0, Y), Z), (SH X1, Y) --> LOGIC (SH (LOGIC X0, X1), Y), Z
https://alive2.llvm.org/ce/z/QmR9rR
This is a reassociation + factoring fold. The common shift operation is moved
after a bitwise logic op on 2 input operands.
We get simpler cases of these patterns in IR, but I suspect we would miss all
of these exact tests in IR too. We also handle the simpler form of this plus
several other folds in DAGCombiner::hoistLogicOpWithSameOpcodeHands().
This is a partial implementation of a transform suggested in D111530
(only handles 'or' bitwise logic as a first step - need to stamp out more
tests for other opcodes).
Several of the same tests added for D111530 are altered here (but not
fully optimized). I'm not sure yet if this would help/hinder that patch,
but this should be an improvement for all tests added with ecf606cb43
since it removes a shift operation in those examples.
Differential Revision: https://reviews.llvm.org/D120516
IR level addDiscriminator pass is guarded by DebugInfoForProfiling
(set by option -fdebug-info-for-profiling).
This patch syncs the logic for the MIR and IR level implementations.
Differential Revision: https://reviews.llvm.org/D120536
If the shl is at least half the bitwidth (i.e. the lower half of the bswap source is zero), then we can reduce the shift and perform the bswap at half the bitwidth and just zero extend.
Based off PR51391 + PR53867
Differential Revision: https://reviews.llvm.org/D120192
This is the SDAG translation of D120253 :
https://alive2.llvm.org/ce/z/qHpmNn
The SDAG nodes can have different operand types than the result value.
We can see an example of that with AArch64 - the funnel shift amount
is an i64 rather than i32.
We may need to make that match even more flexible to handle
post-legalization nodes, but I have not stepped into that yet.
Differential Revision: https://reviews.llvm.org/D120264
When parsing MachineMemOperands, MIRParser treated the "align" keyword
the same as "basealign". Really "basealign" should specify the
alignment of the MachinePointerInfo base value, and "align" should
specify the alignment of that base value plus the offset.
This worked OK when the specified alignment was no larger than the
alignment of the offset, but in cases like this it just caused
confusion:
STW killed %18, 4, %stack.1.ap2.i.i :: (store (s32) into %stack.1.ap2.i.i + 4, align 8)
MIRPrinter would never have printed this, with an offset of 4 but an
align of 8, so it must have been written by hand. MIRParser would
interpret "align 8" as "basealign 8", but I think it is better to give
an error and force the user to write "basealign 8" if that is what they
really meant.
Differential Revision: https://reviews.llvm.org/D120400
Change-Id: I7eeeefc55c2df3554ba8d89f8809a2f45ada32d8
The `SplitIndirectBrCriticalEdges` function was originally designed for
`CodeGenPrepare` and skipped splitting of edges when the destination
block didn't contain any `PHI` instructions. This only makes sense when
reducing COPYs like `CodeGenPrepare`. In the case of
`PGOInstrumentation` or `GCOVProfiling` it would result in missed
counters and wrong result in functions with computed goto.
Differential Revision: https://reviews.llvm.org/D120096
Internally to DAGCombiner the SDValues were passed by non-const
reference despite not being modified. They were then passed by
const reference to TLI.
This patch passes them by value which is consistent with the vast
majority of code.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D120420
In combineCarryDiamond() use getAsCarry() to find more candidates for being a carry flag.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D118362
This is a fix for a regression discussed in:
https://github.com/llvm/llvm-project/issues/53829
We cleared more high multiplier bits with 995d400,
but that can lead to worse codegen because we would fail
to recognize the now disguised multiplication by neg-power-of-2
as a shift-left. The problem exists independently of the IR
change in the case that the multiply already had cleared high
bits. We also convert shl+sub into mul+add in instcombine's
negator.
This patch fills in the high-bits to see the shift transform
opportunity. Alive2 attempt to show correctness:
https://alive2.llvm.org/ce/z/GgSKVX
The AArch64, RISCV, and MIPS diffs look like clear wins. The
x86 code requires an extra move register in the minimal examples,
but it's still an improvement to get rid of the multiply on all
CPUs that I am aware of (because multiply is never as fast as a
shift).
There's a potential follow-up noted by the TODO comment. We
should already convert that pattern into shl+add in IR, so
it's probably not common:
https://alive2.llvm.org/ce/z/7QY_GaFixes#53829
Differential Revision: https://reviews.llvm.org/D120216
As requested in D107955 <https://reviews.llvm.org/D107955>, this patch
splits off the `MC` and `CodeGen` parts and adds a testcase.
Tested on `sparcv9-sun-solaris2.11`, `amd64-pc-solaris2.11`, and
`x86_64-pc-linux-gnu`.
Differential Revision: https://reviews.llvm.org/D120318
Conceptually, the new encoding emits the offsets and sizes as label differences between each two consecutive basic block begin and end label. When decoding, the offsets must be aggregated along with basic block sizes to calculate the final relative-to-function offsets of basic blocks.
This encoding uses smaller values compared to the existing one (offsets relative to function symbol).
Smaller values tend to occupy fewer bytes in ULEB128 encoding. As a result, we get about 25% reduction
in the size of the bb-address-map section (reduction from about 9MB to 7MB).
Reviewed By: tmsriram, jhenderson
Differential Revision: https://reviews.llvm.org/D106421
This adds very basic support for hashing MachineBasicBlock
and MachineFunction, for use in MachineFunctionPass to
detect passes that modify the MachineFunction wrongly.
Differential Revision: https://reviews.llvm.org/D120122
We use offloading sections in the new Clang driver scheme to embed
device code into the host. We later use these sections to link the
device image, after which point they are completely unused and should
not be loaded into memory if they are still in the executable.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D120275
We found a case in the Swift benchmarks where the MachineOutliner introduces
about a 20% compile time overhead in comparison to building without the
MachineOutliner.
The origin of this slowdown is that the benchmark has long blocks which incur
lots of LRU checks for lots of candidates.
Imagine a case like this:
```
bb:
i1
i2
i3
...
i123456
```
Now imagine that all of the outlining candidates appear early in the block, and
that something like, say, NZCV is defined at the end of the block.
The outliner has to check liveness for certain registers across all candidates,
because outlining from areas where those registers are used is unsafe at call
boundaries.
This is fairly wasteful because in the previously-described case, the outlining
candidates will never appear in an area where those registers are live.
To avoid this, precalculate areas where we will consider outlining from.
Anything outside of these areas is mapped to illegal and not included in the
outlining search space. This allows us to reduce the size of the outliner's
suffix tree as well, giving us a potential memory win.
By precalculating areas, we can also optimize other checks too, like whether
or not LR is live across an outlining candidate.
Doing all of this is about a 16% compile time improvement on the case.
This is likely useful for other targets (e.g. ARM + RISCV) as well, but for now,
this only implements the AArch64 path. The original "is the MBB safe" method
still works as before.
Previous we used sra (X, size(X)-1); xor (add (X, Y), Y).
By placing sub at the end, we allow RISCV to combine sign_extend_inreg
with it to form subw.
Some X86 tests for Z - abs(X) seem to have improved as well.
Other targets look to be a wash.
I had to modify ARM's abs matching code to match from sub instead of
xor. Maybe instead ISD::ABS should be made legal. I'll try that in
parallel to this patch.
This is an alternative to D119099 which was focused on RISCV only.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D119171
This code was detecting whether the value returned by getShiftAmountTy
can represent all shift amounts. If not, it would use MVT::i32 as a
placeholder. getShiftAmountTy was updated last year to return i32
if the type returned by the target couldn't represent all values.
This means the MVT::i32 case here is dead and can the logic can
be simplified.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D120164
If the "reciprocal-estimates" attribute is present and it doesn't
contain "all", "none", or "default", we previously crashed on f16
operations.
This patch addes an 'h' suffix' to prevent the crash.
I've added simple tests that just enable the estimate for all
vec-sqrt and one test case that explicitly tests the new 'h' suffix
to override the default steps.
There may be some frontend change needed to, but I haven't checked
that yet.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D120158
The code was considering shifts by an about larger than the number of
bits in the original VT to be out of range. Shifts exactly equal to
the original bit width are also out of range.
I don't know how to test this. DAGCombiner should usually fold this
away. I just noticed while looking for something else in this code. The
llvm-cov report shows that we don't have coverage for out of range shifts here.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D120170
getShiftAmountTy will return MVT::i32 if the shift amount
coming from the target's getScalarShiftAmountTy can't reprsent
all possible values. That should eliminate the need to use the
pointer type which is what we do when LegalTypes is false.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D120165
If the "reciprocal-estimates" attribute is present and it doesn't
contain "all", "none", or "default", we previously crashed on f16
operations.
This patch addes an 'h' suffix' to prevent the crash.
I've added simple tests that just enable the estimate for all
vec-sqrt and one test case that explicitly tests the new 'h' suffix
to override the default steps.
There may be some frontend change needed to, but I haven't checked
that yet.
Differential Revision: https://reviews.llvm.org/D120158
This fold is done in IR:
https://alive2.llvm.org/ce/z/jWyFrP
There is an x86 test that shows an improvement
from the added flexibility of using add (commutative).
The other diffs are presumed neutral.
Note that this could also be folded to an 'xor',
but I'm not sure if that would be universally better
(eg, x86 can convert adds more easily into LEA).
This helps prevent regressions from a potential fold for
issue #53829.
Useful for debugging + evaluating improvements to the outliner.
Stats are the number of illegal, legal, and invisible instructions in the
unsigned vector, and it's total length.
This makes three thread local variables (`__THREW__`, `__threwValue`,
and `__wasm_lpad_context`) unconditionally thread local. If the target
doesn't support TLS, they will be downgraded to normal variables in
`stripThreadLocals`. This makes the object not linkable with other
objects using shared memory, which is what we intend here; these
variables should be thread local when used with shared memory. This is
what we initially tried in D88262.
But D88323 changed this: It only created these variables when threads
were supported, because `__THREW__` and `__threwValue` were always
generated even if Emscripten EH/SjLj was not used, making all objects
built without threads not linkable with shared memory, which was too
restrictive. But sometimes this is not safe. If we build an object using
variables such as `__THREW__` without threads, it can be linked to other
objects using shared memory, because the original object's `__THREW__`
was not created thread local to begin with.
So this CL basically reverts D88323 with some additional improvements:
- This checks each of the functions and global variables created within
`LowerEmscriptenEHSjLj` pass and removes it if it's not used at the
end of the pass. So only modules using those variables will be
affected.
- Moves `CoalesceFeaturesAndStripAtomics` and `AtomicExpand` passes
after all other IR pasess that can create thread local variables. It
is not sufficient to move them to the end of `addIRPasses`, because
`__wasm_lpad_context` is created in `WasmEHPrepare`, which runs inside
`addPassesToHandleExceptions`, which runs before `addISelPrepare`. So
we override `addISelPrepare` and move atomic/TLS stripping and
expanding passes there.
This also removes merges `TLS` and `NO-TLS` FileCheck lines into one
`CHECK` line, because in the bitcode level we always create them as
thread local. Also some function declarations are deleted `CHECK` lines
because they are unused.
Reviewed By: tlively, sbc100
Differential Revision: https://reviews.llvm.org/D120013
This example is not compilable without handling eviction of specific
subregisters. Last chance recoloring was deciding it could try
evicting an overlapping superregister, which doesn't help make any
progress. The LiveIntervalUnion would then assert due to an
overlapping / identical range when trying the new assignment.
Unfortunately this is also producing a verifier error after the
allocation fails. I've seen a number of these, and not sure if we
should just start deleting the function on error rather than trying to
figure out how to put together valid MIR.
I'm not super confident this is the right place to fix this. I also
have a number of failing testcases I need to fix by handling partial
evictions of superregisters.
The current ABD combine doesn't quite work for SVE because only a
single scalable vector per scalar integer type is legal (e.g. for
i32, <vscale x 4 x i32> is the only legal scalable vector type).
This patch extends the combine to also trigger for the cases when
operand extension must be retained.
Differential Revision: https://reviews.llvm.org/D115739
When doing SelectionDAG::ReplaceAllUsesOfValuesWith a worklist is
prepared containing all users that should be updated. Then we use
the RemoveNodeFromCSEMaps/AddModifiedNodeToCSEMaps helpers to handle
recursive CSE updates while doing the replacements.
This patch aims at solving a problem that could arise if the recursive
CSE updates would result in an SDNode present in the worklist is being
removed as a side-effect of morphing a prio user in the worklist.
To examplify such a scenario, imagine that we have these nodes in
the DAG
t12: i64 = add t8, t11
t13: i64 = add t12, t8
t14: i64 = add t11, t11
t15: i64 = add t14, t8
t16: i64 = sub t13, t15
and that the t8 uses should be replaced by t11. An initial worklist
(listing the users that should be morphed) could be [t12, t13, t15].
When updating t12 we get
t12: i64 = add t11, t11
which results in a CSE update that replaces t14 by t12, so we get
t15: i64 = add t12, t8
which results in a CSE update that replaces t13 by t12, so we get
t16: i64 = sub t12, t15
and then t13 is removed given that it was the last use of t13.
So when being done with the updates triggered by rewriting the use
of t8 in t12 the t13 node no longer exist. And we used to end up
hitting an assertion when continuing with the worklist aiming at
replacing the t8 uses in t13.
The solution is based on using a DAGUpdateListener, making sure that
we prune a user from the worklist if it is removed during the
recursive CSE updates.
The bug was found using an OOT target. I think the problem is quite
old, even if the particular intree target reproducer added in this
patch seem to pass when using LLVM 13.0.0.
Differential Revision: https://reviews.llvm.org/D119088
This makes `__wasm_lpad_context`, a struct that is used as a
communication channel between compiler-generated code and personality
function in libunwind, thread local. The library code will be changed to
thread local in the emscripten side.
Reviewed By: sbc100, tlively
Differential Revision: https://reviews.llvm.org/D119803
For AMDGPU the insertion point for a block may not be the first
non-PHI instruction. This happens when a block contains EXEC
mask manipulation related to control flow (converging lanes).
Use SkipPHIsAndLabels to determine the block insertion point
so that the target can skip any block prologue instructions.
Reviewed By: rampitec, ruiling
Differential Revision: https://reviews.llvm.org/D119399
Layering-wise, it seems RegisterBank stuff fits under CodeGen, like
other target abstraction.
In particular, TargetSubtargetInfo has a getRegBankInfo member, but
using that object requires making sure GlobalISel is linked, which is
not always the case (e.g. llvm-jitlink doesn't).
Differential Revision: https://reviews.llvm.org/D119053
This moves the matching of AVGFloor and AVGCeil into a place where
demand bit are available, so that it can detect more cases for more
folds. It changes the transform to start from a shift, not from a
truncate. We match the pattern shr(add(ext(A), ext(B)), 1), transforming
to ext(hadd(A, B)).
For signed values, because only the bottom bits are demanded llvm will
transform the above to use a lshr too, as opposed to ashr. In order to
correctly detect the hadd we need to know the demanded bits to turn it
back. Depending on whether the shift is signed (ashr) or logical (lshr),
and the extensions are signed or unsigned we can create different nodes.
If the shift is signed:
Needs >= 2 sign bits. https://alive2.llvm.org/ce/z/h4gQAW generating signed rhadd.
Needs >= 2 zero bits. https://alive2.llvm.org/ce/z/B64DUA generating unsigned rhadd.
If the shift is unsigned:
Needs >= 1 zero bits. https://alive2.llvm.org/ce/z/ByD8sj generating unsigned rhadd.
Needs 1 demanded bit zero and >= 2 sign bits https://alive2.llvm.org/ce/z/hvPGxX and
https://alive2.llvm.org/ce/z/32P5n1 generating signed rhadd.
Differential Revision: https://reviews.llvm.org/D119072
We have the `clang -cc1` command-line option `-funwind-tables=1|2` and
the codegen option `VALUE_CODEGENOPT(UnwindTables, 2, 0) ///< Unwind
tables (1) or asynchronous unwind tables (2)`. However, this is
encoded in LLVM IR by the presence or the absence of the `uwtable`
attribute, i.e. we lose the information whether to generate want just
some unwind tables or asynchronous unwind tables.
Asynchronous unwind tables take more space in the runtime image, I'd
estimate something like 80-90% more, as the difference is adding
roughly the same number of CFI directives as for prologues, only a bit
simpler (e.g. `.cfi_offset reg, off` vs. `.cfi_restore reg`). Or even
more, if you consider tail duplication of epilogue blocks.
Asynchronous unwind tables could also restrict code generation to
having only a finite number of frame pointer adjustments (an example
of *not* having a finite number of `SP` adjustments is on AArch64 when
untagging the stack (MTE) in some cases the compiler can modify `SP`
in a loop).
Having the CFI precise up to an instruction generally also means one
cannot bundle together CFI instructions once the prologue is done,
they need to be interspersed with ordinary instructions, which means
extra `DW_CFA_advance_loc` commands, further increasing the unwind
tables size.
That is to say, async unwind tables impose a non-negligible overhead,
yet for the most common use cases (like C++ exceptions), they are not
even needed.
This patch extends the `uwtable` attribute with an optional
value:
- `uwtable` (default to `async`)
- `uwtable(sync)`, synchronous unwind tables
- `uwtable(async)`, asynchronous (instruction precise) unwind tables
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D114543
This adds very basic combines for AVG nodes, mostly for constant folding
and handling degenerate (zero) cases. The code performs mostly the same
transforms as visitMULHS, adjusted for AVG nodes.
Constant folding extends to a higher bitwidth and drops the lowest bit.
For undef nodes, `avg undef, x` is transformed to x. There is also a
transform for `avgfloor x, 0` transforming to `shr x, 1`.
Differential Revision: https://reviews.llvm.org/D119559
When deciding where to split a block to insert stack guard checks, we should
move past any debug instructions we see that might (e.g.) be separating a tail
call from its frame wrangling.
This time, also don't run off the front of a basic block.
The current FastISel code reuses the register for a bitcast that
doesn't change the IR type, but uses a reg-to-reg copy if it
changes the IR type without changing the MVT. However, we can
simply reuse the register in that case as well.
In particular, this avoids unnecessary reg-to-reg copies for pointer
bitcasts. This was found while inspecting O0 codegen differences
between typed and opaque pointers.
Differential Revision: https://reviews.llvm.org/D119432
This enables fshl to be matched earlier on X86
%6 = lshr i32 %3, 1
%7 = select i1 %4, i32 -2147483648, i32 0
%8 = or i32 %6, %7
X86 uses i8 for shift amounts. SelectionDAGBuilder creates the
ISD::SRL with an i8 shift type. DAGCombiner turns the select into
an ISD::SHL. Prior to this patch it would use i32 for the shift
amount. fshl matching failed because the shift amounts have different
types. LegalizeDAG fixes the ISD::SHL shift amount to i8. This
allowed fshl matching to succeed.
With this patch, the ISD::SHL will be created with an i8 shift
amount. This allows the fshl to match immediately.
No test case beause we still end up with a fshl either way.
I have not found a way to expose a difference for this patch in a test
because it only triggers for a one-use load, but this is the code that
was adapted into D118376 and caused miscompiles. The new code pattern
is the same as what we do in narrowExtractedVectorLoad() (reduces load
width for a subvector extract).
This removes seemingly unnecessary manual worklist management and fixes
the chain updating via "SelectionDAG::makeEquivalentMemoryOrdering()".
Differential Revision: https://reviews.llvm.org/D119549
This ports the aarch64 combines for HADD and RHADD over to DAG combine,
so that they can be used in more architectures (notably MVE in a
followup patch). They are renamed to AVGFLOOR and AVGCEIL in the
process, to avoid confusion with instructions such as X86 hadd. The code
was also rewritten slightly to remove the AArch64 idiosyncrasies.
The general pattern for a AVGFLOORS is
%xe = sext i8 %x to i32
%ye = sext i8 %y to i32
%a = add i32 %xe, %ye
%r = lshr i32 %a, 1
%t = trunc i32 %r to i8
An AVGFLOORU is equivalent with zext. Because of the truncate
lshr==ashr, as the top bits are not demanded. An AVGCEIL also includes
an extra rounding, so includes an extra add of 1.
Differential Revision: https://reviews.llvm.org/D106237
Add a new llvm.fptrunc.round intrinsic to precisely control
the rounding mode when converting from f32 to f16.
Differential Revision: https://reviews.llvm.org/D110579
When deciding where to split a block to insert stack guard checks, we should
move past any debug instructions we see that might (e.g.) be separating a tail
call from its frame wrangling.
As usual with that header cleanup series, some implicit dependencies now need to
be explicit:
llvm/MC/MCParser/MCAsmParser.h no longer includes llvm/MC/MCParser/MCAsmLexer.h
Preprocessed lines to build llvm on my setup:
after: 1068185081
before: 1068324320
So no compile time benefit to expect, but we still get the looser coupling
between files which is great.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119359
The introduction and some examples are on this page:
https://devblogs.microsoft.com/cppblog/announcing-jmc-stepping-in-visual-studio/
The `/JMC` flag enables these instrumentations:
- Insert at the beginning of every function immediately after the prologue with
a call to `void __fastcall __CheckForDebuggerJustMyCode(unsigned char *JMC_flag)`.
The argument for `__CheckForDebuggerJustMyCode` is the address of a boolean
global variable (the global variable is initialized to 1) with the name
convention `__<hash>_<filename>`. All such global variables are placed in
the `.msvcjmc` section.
- The `<hash>` part of `__<hash>_<filename>` has a one-to-one mapping
with a directory path. MSVC uses some unknown hashing function. Here I
used DJB.
- Add a dummy/empty COMDAT function `__JustMyCode_Default`.
- Add `/alternatename:__CheckForDebuggerJustMyCode=__JustMyCode_Default` link
option via ".drectve" section. This is to prevent failure in
case `__CheckForDebuggerJustMyCode` is not provided during linking.
Implementation:
All the instrumentations are implemented in an IR codegen pass. The pass is placed immediately before CodeGenPrepare pass. This is to not interfere with mid-end optimizations and make the instrumentation target-independent (I'm still working on an ELF port in a separate patch).
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D118428
It's inevitable that optimisation passes will fail to update debug-info:
when that happens, it's best if the compiler doesn't crash as a result.
Therefore, downgrade a few assertions / failure modes that would crash
when illegal debug-info was seen, to instead drop variable locations. In
practice this means that an instruction reference to a nonexistant or
illegal operand should be tolerated.
Differential Revision: https://reviews.llvm.org/D118998
At -O0 we claim to CSE constants only. I think this should apply to
G_FCONSTANT as well as G_CONSTANT.
Differential Revision: https://reviews.llvm.org/D119344
We're hitting a pathological compile-time case, profiled to be in
DagCombiner::visitTokenFactor and many inserts into a SmallPtrSet.
It looks like one of the paths around findBetterNeighborChains is not
capped and leads to this.
This patch resolves the issue. Looking for feedback if this solution
looks reasonable.
Differential Revision: https://reviews.llvm.org/D118877
When we enable -fsplit-dwarf-inlining we end up with two entries
in .debug_aranges for each CU. Because it processes Skeleton CU
inline information and DWO CU.
Furthermore address calculations were incorrect because we were processing sections in Skeleton CU.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D118857
There's a few relevant forward declarations in there that may require downstream
adding explicit includes:
llvm/MC/MCContext.h no longer includes llvm/BinaryFormat/ELF.h, llvm/MC/MCSubtargetInfo.h, llvm/MC/MCTargetOptions.h
llvm/MC/MCObjectStreamer.h no longer include llvm/MC/MCAssembler.h
llvm/MC/MCAssembler.h no longer includes llvm/MC/MCFixup.h, llvm/MC/MCFragment.h
Counting preprocessed lines required to rebuild llvm-project on my setup:
before: 1052436830
after: 1049293745
Which is significant and backs up the change in addition to the usual benefits of
decreasing coupling between headers and compilation units.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119244
The "-fzero-call-used-regs" option tells the compiler to zero out
certain registers before the function returns. It's also available as a
function attribute: zero_call_used_regs.
The two upper categories are:
- "used": Zero out used registers.
- "all": Zero out all registers, whether used or not.
The individual options are:
- "skip": Don't zero out any registers. This is the default.
- "used": Zero out all used registers.
- "used-arg": Zero out used registers that are used for arguments.
- "used-gpr": Zero out used registers that are GPRs.
- "used-gpr-arg": Zero out used GPRs that are used as arguments.
- "all": Zero out all registers.
- "all-arg": Zero out all registers used for arguments.
- "all-gpr": Zero out all GPRs.
- "all-gpr-arg": Zero out all GPRs used for arguments.
This is used to help mitigate Return-Oriented Programming exploits.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D110869
Some globals lower to literal addresses on AMDGPU.
This may be wrong for non-integral address spaces. I'm wondering if we
should just allow regular G_ADD to use pointer types, and reserve
G_PTR_ADD for non-integral address spaces.
This will do the combine in cases that should fold, but don't
now. e.g. we're relying on the CSEMIRBuilder's incomplete constant
folding. For instance it doesn't handle FP operations or vectors (and
we don't have separate constant folding combines either to catch
them).
Added a `NoopSavedModelImpl` type which can be used as a mock AOT-ed
saved model, and further minimize conditional compilation cases. This
also removes unused function warnings on gcc.
The test diffs are identical to D119111.
This only affects x86 currently because no other target
has an override for the TLI hook that controls this transform.
This is no-functional-change-intended because only the
x86 target enables the TLI hook currently.
We can add fmul/fdiv opcodes to the switch similar to the
proposal D119111, but we don't need to make other changes
like enabling target-specific combines.
We can also add integer opcodes (add, or, shl, etc.) to
the switch because this function is called from all of the
generic binary opcodes.
The goal is to incrementally enable the profitable diffs
from D90113 while avoiding regressions.
Differential Revision: https://reviews.llvm.org/D119150
When splitting values, CallLowering assumes Lo part goes first. But in big endian ISA such as M68k, Hi part goes first.
This patch fixes this.
Differential Revision: https://reviews.llvm.org/D116877
Instead of checking for a bitcast from a function type, check
whether the aliasee is a function after stripping bitcasts. This
is not strictly equivalent, but serves the same purpose.
In many cases, calls to isShiftedMask are immediately followed with checks to determine the size and position of the bitmask.
This patch adds variants of APInt::isShiftedMask, isShiftedMask_32 and isShiftedMask_64 that return these values as additional arguments.
I've updated a number of cases that were either performing seperate size/position calculations or had created their own local wrapper versions of these.
Differential Revision: https://reviews.llvm.org/D119019
Add a shouldHoist method to TargetInstrInfo which is queried by
MachineLICM to override hoisting decisions for a given target.
This mirrors functionality provided by shouldSink.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D118773
Debug position data is cleared after ScheduleDAGMILive::schedule() due to it also calling placeDebugValues(). Make it so the data is not cleared after initial call to placeDebugValues since we will call it again after reverting a schedule.
Secondly, since we skip debug instructions when reverting the schedule on AMDGPU, all debug instructions are now moved to the end of the scheduling region. RegionEnd points to the beginning of this chunk of debug instructions since it was not incremented when a debug instruction was skipped. RegionBegin may also point to the same debug instruction if Unsched.front() is a debug instruction thus shrinking the region to 1. Fix RegionBegin and RegionEnd so that they point to the current beginning and ending before calling placeDebugValues() since both vars will be used as reference points to move debug instructions back.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D119022
rv64izbb has a RORW/ROLW instructions that operate on the lower
32-bits of a 64-bit value and sign extend bit 31 of the result.
DAGCombiner won't match rotate idioms because the i32 type isn't Legal
on riscv64.
This patch teaches DAGCombiner to allow it if the type is going to
be promoted and the target has Custom type legalization for ISD::ROTL
or ISD::ROTR. I've restricted this to scalar types. It doesn't appear
any in tree targets other than riscv64 have custom type legalization
for rotates.
If this patch isn't acceptable, I guess I can match SRLW, SLLW, and OR
after type legalization, but I'd like to avoid that if possible.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D119062
When the shift amount is known and a known sign bit analysis of
the shiftee indicates that no saturation will occur, then we can
replace SSHLSAT/USHLSAT by SHL.
Differential Revision: https://reviews.llvm.org/D118765
FSAFDO profile loader is currently disabled even --enable-fs-discriminator is enabled.
They need to be turned on by options which makes it cumbersome for experiments.
This patch changes the FSAFDO profile loader enabled by default. Since they are
guarded by EnableFSDiscriminator, they will only be turned on if
--enable-fs-discriminator is enabled. Note that --enable-fs-discriminator is
still disabled by default.
Differential Revision: https://reviews.llvm.org/D119033
I'm seeing ext-tsp helps CSSPGO for our intern large benchmarks so I'm turning on it for CSSPGO. For non-CS AutoFDO, ext-tsp doesn't seem to help, probably because of lower profile counts quality.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D119048
These operations are scalarized but the result type v1i1 isn't which
needs special handling (the same as is done for the non-strict
versions of these operations).
Differential Revision: https://reviews.llvm.org/D118258
This header is very large (3M Lines once expended) and was included in location
where dwarf-specific information were not needed.
More specifically, this commit suppresses the dependencies on
llvm/BinaryFormat/Dwarf.h in two headers: llvm/IR/IRBuilder.h and
llvm/IR/DebugInfoMetadata.h. As these headers (esp. the former) are widely used,
this has a decent impact on number of preprocessed lines generated during
compilation of LLVM, as showcased below.
This is achieved by moving some definitions back to the .cpp file, no
performance impact implied[0].
As a consequence of that patch, downstream user may need to manually some extra
files:
llvm/IR/IRBuilder.h no longer includes llvm/BinaryFormat/Dwarf.h
llvm/IR/DebugInfoMetadata.h no longer includes llvm/BinaryFormat/Dwarf.h
In some situations, codes maybe relying on the fact that
llvm/BinaryFormat/Dwarf.h was including llvm/ADT/Triple.h, this hidden
dependency now needs to be explicit.
$ clang++ -E -Iinclude -I../llvm/include ../llvm/lib/Transforms/Scalar/*.cpp -std=c++14 -fno-rtti -fno-exceptions | wc -l
after: 10978519
before: 11245451
Related Discourse thread: https://llvm.discourse.group/t/include-what-you-use-include-cleanup
[0] https://llvm-compile-time-tracker.com/compare.php?from=fa7145dfbf94cb93b1c3e610582c495cb806569b&to=995d3e326ee1d9489145e20762c65465a9caeab4&stat=instructions
Differential Revision: https://reviews.llvm.org/D118781
In the aftermath of D116895 a problem was found in the analysis of
dependencies between store merge candidates in
checkMergeStoreCandidatesForDependencies, that is needed to avoid
the cycles are introduced in the DAG.
In the past it has been enough (or assumed to be enough) to start
scanning from non-chain operands when analysing the store merge
candidates for dependencies, assuming that the analysis of chain
dependencies performed when finding the candidates would cover
up for potential dependencies that exist involving the chain operands.
It was however discovered that one could end up with scenarios such
as descibed in the aarch64-checkMergeStoreCandidatesForDependencies.ll
test case, when the dependency between two stores is given by a mix
of chain operand dependencies and non-chain operand dependencies.
The fix in this patch make sure that we also account for chain operand
dependencies when doing the more elaborate analysis in
checkMergeStoreCandidatesForDependencies, no longer relying on that
the earlier check involving chain operands is enough.
Differential Revision: https://reviews.llvm.org/D118943
Similar to the G_*MULO change.
The code for checking if a constant is legal/pre-legalize is shared between
these, and is kind of hairy. So, factor it out into a new function:
`isConstantLegalOrBeforeLegalizer`.
To make the refactoring clean, further refactor `isLegalOrBeforeLegalizer` into
a wrapper for two functions:
- `isPreLegalize`
- `isLegal`
This is a bit easier to read in general.
https://godbolt.org/z/KW7oszP1o
Differential Revision: https://reviews.llvm.org/D118655
Similar to the following combine in `DAGCombiner::visitMULO`:
```
// fold (mulo x, 0) -> 0 + no carry out
if (isNullOrNullSplat(N1))
return CombineTo(N, DAG.getConstant(0, DL, VT),
DAG.getConstant(0, DL, CarryVT));
```
This fixes some generally poor codegen for `*mulo`:
https://godbolt.org/z/eTxYsvz8f
Differential Revision: https://reviews.llvm.org/D118635
AddressingModeMatcher::matchOperationAddr may attempt to shift a
variable by the same amount of steps as found in the IR in a SHL
instruction. This was done without considering that there could be
undefined behavior in the IR, so the shift performed when compiling
could end up having undefined behavior as well.
This patch avoid UB in the codegenprepare by making sure that we
limit the shift amount used, in a similar way as already being done
in CodeGenPrepare::optimizeLoadExt.
Differential Revision: https://reviews.llvm.org/D118602
This helps recognise patterns where we're trying to match STEP_VECTOR
patterns to INDEX instructions that take a GPR for the Start/Step.
The reason for canonicalising this operation to the LHS is
because it will already be canonicalised to the LHS if the RHS
is a constant splat vector.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D118459
After discussion in D116821 this was turned off in 74db5c8c95,
14aaaa1236 applied to limit the maximum memory consumption in rare
conditions, plus some performance patches.
This was using the ugly tablegenerated register enum names, which are
really hideous for register tuples on AMDGPU. Use the prettier names
which are recognized by the asm parser.
Gaps in the basic block number range (from blocks being deleted or folded)
get block-value-tables allocated but never ejected, leading to a memory
leak, currently tripping up the asan buildbots. Fix this up by manually
freeing that memory.
As suggested elsewhere, if these things were owned by a unique_ptr then
cleanup would happen automagically. D118774 should eliminate the need for
this dance.
This patch introduces the conversions from math function calls
to MASS library calls. To resolves calls generated with these conversions, one
need to link libxlopt.a library. This patch is tested on PowerPC Linux and AIX.
Differential: https://reviews.llvm.org/D101759
Reviewer: bmahjour
Added a flag to make configurable the number of interferences after
which we 'bail out' and treat a set of intervals as un-evictable. Also
using it on the ML side, as it turns out to be a good control for
compile-time.
With this configurable, we can do a bit of trial and error and see if
bumping it has any effect on heuristic/policy quality.
Differential Revision: https://reviews.llvm.org/D118707
This is a follow-up to D117877: variable assignments of DBG_VALUE $noreg,
or DBG_INSTR_REFs where no value can be found, are represented by a
DbgValue object with Kind "Undef", explicitly meaning "there is no value".
In D117877 I added a special-case to some assignment accounting faster,
without considering this scenario. It causes variables to be given the
value ValueIDNum::EmptyValue, which then ends up being a DenseMap key. The
DenseMap asserts, because EmptyValue is the tombstone key.
Fix this by handling the assign-undef scenario in the special case, to
match what happens in the general case: the variable has no value if it's
only ever assigned $noreg / undef.
Differential Revision: https://reviews.llvm.org/D118715
This patch aims to reduce max-rss from instruction referencing, by avoiding
keeping variable value information in memory for too long. Instead of
computing all the variable values then emitting them to DBG_VALUE
instructions, this patch tries to stream the information out through a
depth first search:
* Make use of the fact LexicalScopes gives a depth-number to each lexical
scope,
* Produce a map that identifies the last lexical scope to make use of a
block,
* Enumerate each scope in LexicalScopes' DFS order, solving the variable
value problem,
* After each scope is processed, look for any blocks that won't be used by
any other scope, and emit all the variable information to DBG_VALUE
instructions.
Differential Revision: https://reviews.llvm.org/D118460
This patch releases some memory from InstrRefBasedLDV earlier that it would
otherwise. The underlying problem is:
* We store a big table of "live in values for each block",
* We translate that into DBG_VALUE instructions in each block,
And both exist in memory at the same time, which needlessly doubles that
information. The most of what this patch does is: as we progressively
translate live-in information into DBG_VALUEs, we free the variable-value /
machine-value tracking information as we go, which significantly reduces
peak memory.
While I'm here, also add a clear method to wipe variable assignments that
have been accumulated into VLocTracker objects, and turn a DenseMap into
a SmallDenseMap to avoid an initial allocation.
Differential Revision: https://reviews.llvm.org/D118453
Install a cache of DBG_INSTR_REF -> ValueIDNum resolutions, for scenarios
where the value has to be reconstructed from several DBG_PHIs. Whenever
this happens, it's because branch folding + tail duplication has messed
with the SSA form of the program, and we have to solve a mini SSA problem
to find the variable value. This is always called twice, so it makes sense
to cache the value.
This gives a ~0.5% geomean compile-time-performance improvement on CTMark.
Differential Revision: https://reviews.llvm.org/D118455
None of the external users actual touch these (they're purely used internally down the recursive call) - its trivial to add another wrapper if anything ever does want to track known elements.
Was reverted in 1c1b670a73 as it broke all non-x86 bots. Original commit
message:
[DebugInfo][InstrRef] Add a max-stack-slots-to-track cut-out
In certain circumstances with things like autogenerated code and asan, you
can end up with thousands of Values live at the same time, causing a large
working set and a lot of information spilled to the stack. Unfortunately
InstrRefBasedLDV doesn't cope well with this and consumes a lot of memory
when there are many many stack slots. See the reproducer in D116821.
It seems very unlikely that a developer would be able to reason about
hundreds of live named local variables at the same time, so a huge working
set and many stack slots is an indicator that we're likely analysing
autogenerated or instrumented code. In those cases: gracefully degrade by
setting an upper bound on the amount of stack slots to track. This limits
peak memory consumption, at the cost of dropping some variable locations,
but in a rare scenario where it's unlikely someone is actually going to
use them.
In terms of the patch, this adds a cl::opt for max number of stack slots to
track, and has the stack-slot-numbering code optionally return None. That
then filters through a number of code paths, which can then chose to not
track a spill / restore if it touches an untracked spill slot. The added
test checks that we drop variable locations that are on the stack, if we
set the limit to zero.
Differential Revision: https://reviews.llvm.org/D118601
The new LEGALAVL node annotates that the AVL refers to packs of 64bit.
We use a two-stage lowering approach with LEGALAVL:
First, standard SDNodes are translated into illegal VVP layer nodes.
Regardless of source (VP or standard), all VVP nodes have a mask and AVL
parameter. The AVL parameter refers to the element position (just as in
VP intrinsics).
Second, we legalize the AVL usage in VVP layer nodes. If the element
size is < 64bit, the EVL parameter has to be adjusted to refer to packs
of 64bits. We wrap the legalized AVL in a LEGALAVL node to track this.
Reviewed By: kaz7
Differential Revision: https://reviews.llvm.org/D118321
This reverts commit ab4756338c.
Breaks some cases, including this:
namespace {
template <typename> struct a {};
} // namespace
class c {
c();
};
class b {
b();
a<c> ax;
};
b::b() {}
c::c() {}
By producing a reference to a type unit for "c" but not producing the type unit.
Bypass this loop if it would do nothing -- if there are no register masks
to be examined, there's no point looking at each location to see if the
location has been def'd. Awkwardly, this was responsible for almost an
entire half a percent of performance improvement on CTMark.
Differential Revision: https://reviews.llvm.org/D118613
In certain circumstances with things like autogenerated code and asan, you
can end up with thousands of Values live at the same time, causing a large
working set and a lot of information spilled to the stack. Unfortunately
InstrRefBasedLDV doesn't cope well with this and consumes a lot of memory
when there are many many stack slots. See the reproducer in D116821.
It seems very unlikely that a developer would be able to reason about
hundreds of live named local variables at the same time, so a huge working
set and many stack slots is an indicator that we're likely analysing
autogenerated or instrumented code. In those cases: gracefully degrade by
setting an upper bound on the amount of stack slots to track. This limits
peak memory consumption, at the cost of dropping some variable locations,
but in a rare scenario where it's unlikely someone is actually going to
use them.
In terms of the patch, this adds a cl::opt for max number of stack slots to
track, and has the stack-slot-numbering code optionally return None. That
then filters through a number of code paths, which can then chose to not
track a spill / restore if it touches an untracked spill slot. The added
test checks that we drop variable locations that are on the stack, if we
set the limit to zero.
Differential Revision: https://reviews.llvm.org/D118601
When finding locations for variable values at the start of a block, we
build a large map of every value to every location, and then pick out the
locations for values that are desired. This takes up quite a lot of time,
because, unsurprisingly, there are usually more values in registers and
stack slots than there are variables.
This patch instead creates a map of desired values to their locations,
which are initially illegal locations. Then, as we examine every available
value, we can select locations for values we care about, and ignore those
that we don't. This substantially reduces the amount of work done (i.e.,
building a map up of values to locations that nothing wants or needs).
Geomean performance improvement of 1% on CTMark, woo.
Differential Revision: https://reviews.llvm.org/D118597
Do "simplifyShift" and "FoldConstantArithmetic" folds for the SSHLSAT
and USHLSAT DAG nodes.
This includes folds such as:
(shlsat undef/poison, x) -> 0
(shlsat x, undef/poison) -> undef
(shlsat x, too_large_shamt) -> undef
(shlsat 0, x) -> 0
(shlsat x, 0) -> x
(shlsat c1, c2) -> c3
Differential Revision: https://reviews.llvm.org/D118603
I have updated TargetLowering::isConstTrueVal to also consider
SPLAT_VECTOR nodes with constant integer operands. This allows the
optimisation to also work for targets that support scalable vectors.
Differential Revision: https://reviews.llvm.org/D117210
Factoring it out so we can subsequently cache it. This should be a NFC,
however, for the float quantities, we see small errors in the least
significant digits. This is because, before, we were summing up one by
one. Now, we sum up results of sums.
This shouldn't matter for ML, and will require rework when we do
quantization (avoiding floats altogether), but meanwhile, it did require
an update to the reference file used for testing.
The patch also bumps the precision of the variables involved in this, to
reduce the error (note they are casted back to float at the end by the
SET macro, since we only work with float and not double in TF)
Differential Revision: https://reviews.llvm.org/D118659
This is because a subsequent patch will propose obtaining the VRAI from
the advisor, which will enable feature caching for the ML advisor, for
better compile time. Making this change first as it's both innocuous and
keeps the future patch to be reviewed small.
We plan to pass the MachineFunction& to APIs that expect it non-const
(for legitimate reasons). The advisor still holds the ref as a const
ref, though, so we keep most of the maintainability value of that.
For the cross block gc.result projection case, we only care about the return type if there is a cross block gc.result, and if there is one, we can take the type from the gc.result.
At the moment, this makes little difference, but for opaque pointers we need a means to get result typing without relying on pointee types.
When lowering a gc.result, we can assume that the result type of the gc.result matches the type of the underlying call. This is explicitly required in LangRef.
At the moment, this makes little difference, but for opaque pointers we need a means to get result typing without relying on pointee types.
This patch shuffles some functions around so that some blocks of code can
be reused. In particular,
* Move the determination of "which blocks are in scope" to its own
function, as it's non-trivial to solve. Delete the "InScopeBlocks"
collection too, which nothing reads from.
* Split transfer emission (i.e., installing DBG_VALUEs into blocks) into
its own function.
* Name some useful types.
* Rename "ScopeToBlocks" to "ScopeToAssignBlocks", as that's what the
collection contains, blocks where assignments happen.
Differential Revision: https://reviews.llvm.org/D118454
ValueIDNum is supposed to be a value type that boils down to a uint64_t,
that has some bitfields for convenience. If we use the default operator=,
we end up with each bit field being individually assigned, which is
un-necessarily slow.
Implement the assignment operator by just copying the uint64_t value of
the object. This is quicker, and matches how the comparison operators
work already. Doing so is 0.1% faster on the compile-time-tracker.
Fixes a crash ('Invalid size request on a scalable vector') in visitAlloca()
when we call this function for a scalable alloca instruction, caused
by the implicit conversion of TySize to uint64_t.
This patch changes TySize to a TypeSize as returned by getTypeAllocSize()
and ensures the allocation size is multiplied by vscale for scalable vectors.
Reviewed By: sdesmalen, david-arm
Differential Revision: https://reviews.llvm.org/D118372
We already call SimplifyDemandedVectorElts using whether each vector mask element is zero/nonzero, this just extends this to also try SimplifyDemandedBits using the demanded bits mask generated from the nonzero elements.
This also requires an additional TargetLowering::SimplifyDemandedBits DemandedBits/DemandedElts wrapper.
If we only assign a variable value a single time, we can take a short-cut
when computing its location: the variable value is only valid up to the
dominance frontier of where the assignemnt happens. Past that point, there
are other predecessors from where the variable has no value, meaning the
variable has no location past that point.
This patch recognises this scenario, and avoids expensive SSA computation,
to improve compile-time performance.
Differential Revision: https://reviews.llvm.org/D117877
If AllocationOrder has less than 32 elements, we were treating the extra
positions as if they were valid. This was detected by a subsequent
assert. The fix also tightens the asserts.
Both IDFCalculatorBase and its accompanying DominatorTreeBase only supports pointer nodes. The template argument is the block type itself and any uses of GraphTraits is therefore done via a pointer to the node type.
However, the ChildrenGetterTy type of IDFCalculatorBase has a use on just the node type instead of a pointer to the node type. Various parts of the monorepo has worked around this issue by providing specializations of GraphTraits for the node type directly, or not been affected by using specializations instead of the generic case. These are unnecessary however and instead the generic code should be fixed instead.
An example from within Tree is eg. A use of IDFCalculatorBase in InstrRefBasedImpl.cpp. It basically instantiates a IDFCalculatorBase<MachineBasicBlock, false> but due to the bug above then goes on to specialize GraphTraits<MachineBasicBlock> although GraphTraits<MachineBasicBlock*> exists (and should be used instead).
Similar dead code exists in clang which defines redundant GraphTraits to work around this bug.
This patch fixes both the original issue and removes the dead code that was used to work around the issue.
Differential Revision: https://reviews.llvm.org/D118386
Close#52781: for LTO, the inline asm diagnostic uses `<inline asm>` as the file
name (lib/CodeGen/AsmPrinter/AsmPrinterInlineAsm.cpp) and it is unclear which
module has the issue.
With this patch, we will see the module name (say `asm.o`) before `<inline asm>` with ThinLTO.
```
% clang -flto=thin -c asm.c && myld.lld asm.o -e f
ld.lld: error: asm.o <inline asm>:1:2: invalid instruction mnemonic 'invalid'
invalid
^~~~~~~
```
For regular LTO, unfortunately the original module name is lost and we only get
ld-temp.o.
Reviewed By: #lld-macho, ychen, Jez Ng
Differential Revision: https://reviews.llvm.org/D118434
If we have a vector FP division with a splatted divisor, use
getVectorMinNumElements when scaling the num of uses by splat factor.
For AArch64 the combine kicks in for the <vscale x 4 x float> case since it's
above the fdiv threshold (3) when scaling num uses by splat factor, but the
codegen is worse (splat + vector fdiv + vector fmul) than the <vscale x 2 x
double> case (splat + vector fdiv).
If the combine could be converted into a scalar FP division by
scalarizeBinOpOfSplats it may be cheaper, but it looks like this is predicated
on the isExtractVecEltCheap TLI function which is implemented for x86 but not
AArch64. Perhaps for now combineRepeatedFPDivisors should only scale num uses
by splat if the division can be converted into scalar op.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D118343
Shiny new DBG_PHI instruction usually have physical registers as operands
-- however, the machine verifier checks to see whether they're live, and
occasionally this fails. There's a filter for DBG_VALUE instructions to not
get verified in this way: expand it to exempt all debug instructions from
liveness checking, which means DBG_PHIs get treated like DBG_VALUEs.
This also future proofs against us adding new debug instructions.
Differential Revision: https://reviews.llvm.org/D117891
On the level of the generated object files, both symbols (both
original and alias) are generally indistinguishable - both are
regular defined symbols. But previously, only the original
function had the COFF ComplexType set to IMAGE_SYM_DTYPE_FUNCTION,
while the symbol created via an alias had the type set to
IMAGE_SYM_DTYPE_NULL.
This matches what GCC does, which emits directives for setting the
COFF symbol type for this kind of alias symbol too.
This makes a difference when GNU ld.bfd exports symbols without
dllexport directives or a def file - it seems to decide between
function or data exports based on the COFF symbol type. This means
that functions created via aliases, like some C++ constructors,
are exported as data symbols (missing the thunk for calling without
dllimport).
The hasnt been an issue when doing the same with LLD, as LLD decides
between function or data export based on the flags of the section
that the symbol points at.
This should fix the root cause of
https://github.com/msys2/MINGW-packages/issues/10547.
Differential Revision: https://reviews.llvm.org/D118328
Use the llvm flag `-pgo-function-entry-coverage` to create single byte "counters" to track functions coverage. This mode has significantly less size overhead in both code and data because
* We mark a function as "covered" with a store instead of an increment which generally requires fewer assembly instructions
* We use a single byte per function rather than 8 bytes per block
The trade off of course is that this mode only tells you if a function has been covered. This is useful, for example, to detect dead code.
When combined with debug info correlation [0] we are able to create an instrumented Clang binary that is only 150M (the vanilla Clang binary is 143M). That is an overhead of 7M (4.9%) compared to the default instrumentation (without value profiling) which has an overhead of 31M (21.7%).
[0] https://groups.google.com/g/llvm-dev/c/r03Z6JoN7d4
Reviewed By: kyulee
Differential Revision: https://reviews.llvm.org/D116180
We already perform some basic folds (add/sub with zero etc.) on scalar types, this patch adds some basic support for constant splats as well in a few cases (we can add more with future test coverage).
In the cases I've enabled, we can handle buildvector implicit truncation as we're not creating new constant nodes from the vector types - we're just returning existing nodes. This allows us to get a number of extra cases in the aarch64 tests.
I haven't enabled support for undefs in buildvector splats, as we're often checking for zero/allones patterns that return the original constant and we shouldn't be returning undef elements in some of these cases - we can enable this later if we're OK with creating new constants.
Differential Revision: https://reviews.llvm.org/D118264
This patch adds support for expanding VP_MERGE through a sequence of
vector operations producing a full-length mask setting up the elements
past EVL/pivot to be false, combining this with the original mask, and
culminating in a full-length vector select.
This expansion should work for any data type, though the only use for
RVV is for boolean vectors, which themselves rely on an expansion for
the VSELECT.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D118058
A shift-left > 63 triggers a UBSAN failure. This patch kicks the can
down the road (to the consumer) by emitting a more compact
representation of the shift computation in DWARF expressions.
Relanding (I accidentally pushed an earlier version of the patch previously).
Differential Revision: https://reviews.llvm.org/D118183
The physical register in the asm has the wrong type for the declared
IR. It seems to work in the DAG by extracting the 4 elements that are
defined in the IR from the register, but that isn't handled here. This
doesn't seem to be a well tested path since other mismatched cases are
crashing the DAG asm handling.
A shift-left > 63 triggers a UBSAN failure. This patch kicks the can
down the road (to the consumer) by emitting a more compact
representation of the shift computation in DWARF expressions.
Differential Revision: https://reviews.llvm.org/D118183
DIStringType is used to encode the debug info of a character object
in Fortran. A Fortran deferred-length character object is typically
implemented as a pair of the following two pieces of info: An address
of the raw storage of the characters, and the length of the object.
The stringLocationExp field contains the DIExpression to get to the
raw storage.
This patch also enables the emission of DW_AT_data_location attribute
in a DW_TAG_string_type debug info entry based on stringLocationExp
in DIStringType.
A test is also added to ensure that the bitcode reader is backward
compatible with the old DIStringType format.
Differential Revision: https://reviews.llvm.org/D117586
This reverts commit ef82063207.
- It conflicts with the existing llvm::size in STLExtras, which will now
never be called.
- Calling it without llvm:: breaks C++17 compat
The loop below the changed line assumes that the element
width of the target constant is the same as the element
width of the loaded value, but that is not always true.
We could try harder to do some kind of min/max calc even
if the sizes don't match, but that can be another patch
if needed. This fixes#53401 (miscompile) and does not
change the motivating cases added when this analysis
was introduced:
ad298f86b7
Currently not (xor_one_use) pattern is always selected to S_XNOR irrelative od the node divergence.
This relies on further custom selection pass which converts to VALU if necessary and replaces with V_NOT_B32 ( V_XOR_B32)
on those targets which have no V_XNOR.
Current change enables the patterns which explicitly select the not (xor_one_use) to appropriate form.
We assume that xor (not) is already turned into the not (xor) by the combiner.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D116270
This is the unsigned variant of D111976, where we convert a clamped
fptoui to a fptoui.sat. Because we are unsigned, the condition this time
is only UMIN of UINT_MAX. Similarly to D111976 it handles ISD::UMIN,
ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes.
This especially helps on ARM/AArch64 where the vcvt instructions
naturally saturate the result.
Differential Revision: https://reviews.llvm.org/D114964
When evicting interference, it causes an asseertion error
since LiveIntervals::intervalIsInOneMBB assumes that input
is not empty.
This patch fixed bug mentioned in D118020.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D118124
A shift-left > 63 triggers a UBSAN failure. This patch kicks the can
down the road (to the consumer) by emitting a more compact
representation of the shift computation in DWARF expressions.
Differential Revision: https://reviews.llvm.org/D118183
During fast-isel calling 'markFunctionEnd' in the base class will call
tidyLandingPads. This can cause an issue where we have determined that
we need ehinfo and emitted a traceback table with the bits set to
indicate that we will be emitting the ehinfo, but the tidying deletes
all landing pads. In this case we end up emitting a reference to
__ehinfo.N symbol, but not emitting a definition to said symbol and the
resulting file fails to assemble.
Differential Revision: https://reviews.llvm.org/D117040
An sra is basically sign-extending a narrower value. Fold away the
shift by doing a sextload of a narrower value, when it is legal to
reduce the load width accordingly.
Differential Revision: https://reviews.llvm.org/D116930
This patch adds widening support for ISD::VP_MERGE, which widens
identically to VP_SELECT and similarly to other select-like nodes.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D118030
This patch adds splitting support for ISD::VP_MERGE, which splits
identically to VP_SELECT and similarly to other select-like nodes.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D118032
Split these nodes in a similar way as their masked versions.
Reviewed By: frasercrmck, craig.topper
Differential Revision: https://reviews.llvm.org/D117760
Instead use either Type::getPointerElementType() or
Type::getNonOpaquePointerElementType().
This is part of D117885, in preparation for deprecating the API.
DwarfCompileUnit::getOrCreateSourceID() is often called many times
in sequence with the same DIFile. This is currently very expensive,
because it involves creating a string from directory and file name
and looking it up in a string map. This patch remembers the last
DIFile and its ID and directly returns that.
This gives a geomean -1.3% compile-time improvement on CTMark O0-g.
Differential Revision: https://reviews.llvm.org/D118041
This matches the actual runtime function more closely.
I considered also renaming both RetainRV/UnsafeClaimRV to end with
"ARV", for AutoreleasedReturnValue, but there's less potential
for confusion there.
Over in the comments for D116821, some use-cases have cropped up where
there's a substantial increase in memory usage. A quick inspection
shows that a) it's a lot of memory and b) there are several things to
be done to reduce it. Reverting (via disabling this feature by default)
to avoid bothering people in the meantime.
Given that step_vector is practically a constant, doing this early
helps with DAGCombine folds that happen before type legalization.
There is currently no way to test this happens earlier, although existing
tests for step_vector folds continue protect the folds happening at all.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D117863
If the bitreverse gets expanded, it will introduce a new bswap. By
putting a bswap before the bitreverse, we can ensure it gets cancelled
out when this happens.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D118012
This can show up during when bitreverse is expanded to bswap and
swap of bits within a byte. If the input is already a bswap, we
should cancel them out before we further transform them in a way
that makes it harder to see the redundancy.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D118007
Only using that change in StringRef already decreases the number of
preoprocessed lines from 7837621 to 7776151 for LLVMSupport
Perhaps more interestingly, it shows that many files were relying on the
inclusion of StringRef.h to have the declaration from STLExtras.h. This
patch tries hard to patch relevant part of llvm-project impacted by this
hidden dependency removal.
Potential impact:
- "llvm/ADT/StringRef.h" no longer includes <memory>,
"llvm/ADT/Optional.h" nor "llvm/ADT/STLExtras.h"
Related Discourse thread:
https://llvm.discourse.group/t/include-what-you-use-include-cleanup/5831
In code review for D117104 two slightly weird checks were found
in DAGCombiner::reduceLoadWidth. They were typically checking
if BitsA was a mulitple of BitsB by looking at (BitsA & (BitsB - 1)),
but such a comparison actually only make sense if BitsB is a power
of two.
The checks were related to the code that attempted to shrink a load
based on the fact that the loaded value would be right shifted.
Afaict the legality of the value types is checked later (typically in
isLegalNarrowLdSt), so the existing checks were both overly
conservative as well as being wrong whenever ExtVTBits wasn't a
power of two. The latter was a situation triggered by a number of
lit tests so we could not just assert on ExtVTBIts being a power of
two).
When attempting to simply remove the checks I found some problems,
that seems to have been guarded by the checks (maybe just out of
luck). A typical example would be a pattern like this:
t1 = load i96* ptr
t2 = srl t1, 64
t3 = truncate t2 to i64
When DAGCombine is visiting the truncate reduceLoadWidth is called
attempting to narrow the load to 64 bits (ExtVT := MVT::i64). Then
the SRL is detected and we set ShAmt to 64.
In the past we've bailed out due to i96 not being a multiple of 64.
If we simply remove that check then we would end up replacing the
load with a new load that would read 64 bits but with a base pointer
adjusted by 64 bits. So we would read 32 bits the wasn't accessed by
the original load.
This patch will instead utilize the fact that the logical left shift
can be folded away by using a zextload. Thus, the pattern above will
now be combined into
t3 = load i32* ptr+offset, zext to i64
Another case is shown in the X86/shift-folding.ll test case:
t1 = load i32* ptr
t2 = srl i32 t1, 8
t3 = truncate t2 to i16
In the past we bailed out due to the shift count (8) not being a
multiple of 16. Now the narrowing kicks in and we get
t3 = load i16* ptr+offset
Differential Revision: https://reviews.llvm.org/D117406
EmitSchedule() shouldn't be touching instructions after the provided
insertion point. The change introduced in D83561 performs a scan to
the end of the block, and thus may move unrelated instructions. In
particular, this ends up moving instructions that have been produced
by FastISel and will later be deleted. Moving them means that more
instructions than intended are removed.
Fix this by stopping the iteration when the insertion point is
reached.
Fixes https://github.com/llvm/llvm-project/issues/53243.
Differential Revision: https://reviews.llvm.org/D117489
SelectionDAG::getNode() canonicalises constants to the RHS if the
operation is commutative, but it doesn't do so for constant splat
vectors. Doing this early helps making certain folds on vector types,
simplifying the code required for target DAGCombines that are enabled
before Type legalization.
Somewhat to my surprise, DAGCombine doesn't seem to traverse the
DAG in a post-order DFS, so at the time of doing some custom fold where
the input is a MUL, DAGCombiner::visitMUL hasn't yet reordered the
constant splat to the RHS.
This patch leads to a few improvements, but also a few minor regressions,
which I traced down to D46492. When I tried reverting this change to see
if the changes were still necessary, I ran into some segfaults. Not sure
if there is some latent bug there.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117794
This change folds (or (shl x, C0), (lshr y, C1)) to funnel shift iff C0
and C1 are constants where C0 + C1 is the bit-width of the shift
instructions.
Differential Revision: https://reviews.llvm.org/D116529
LLVM DebugInfo CodeGen synthesizes type declarations in type units when
referencing types that are not in type units. When those synthesized
types are templates and simplified template names (or mangled simplified
template names) are in use, the template arguments must be attached to
those declarations.
A deeper fix (with a CU or DICompositeType flag) that would also support
other uses of clang's -debug-forward-template-args (such as Sony's
platform) could/should be implemented to fix this more broadly.
Doing this causes a declaration of the internal linkage (anonymous
namespace) type to be emitted in the type unit, which would then be
ambiguous as to which internal linkage definition it refers to (since
the name is only valid internally).
It's possible these internal linkage types could be resolved relative to
the unit the TU is referred to from - but that doesn't seem ideal, and
there's no reason to put the type in a type unit since it can only be
defined in one CU anyway (since otherwise it'd be an ODR violation) & so
avoiding the type unit should be a smaller DWARF encoding anyway.
This also addresses an issue with Simplified Template Names where the
template parameter could not be rebuilt from the declaration emitted
into the TU (specifically for an enum non-type template parameter, where
looking up the enumerators is necessary to rebuild the full template
name)
Fixes parity codegen issue where we know all but the lowest bit is zero, we can replace the ICMPNE with 0 comparison with a ext/trunc
Differential Revision: https://reviews.llvm.org/D117983
Fixes parity codegen issue where we know all but the lowest bit is zero, we can replace the ICMPNE with 0 comparison with a ext/trunc
Differential Revision: https://reviews.llvm.org/D117983
Pulled out of D106237, this folds truncstore(extend(x)) back to store(x)
if the original store was legal. This can come up due to the order we
fold nodes. A fold from X86 needs to be adjusted to prevent infinite
loops, to have it pick the operand of a trunc more directly.
Differential Revision: https://reviews.llvm.org/D117901
Fix PR53163 by rounding the byte size of DW_TAG_base_type types up. Without
this fix we risk emitting types with a truncated size (including rounding
less-than-byte-sized types' sizes down to zero).
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D117124
This patch adds support for the MSVC /HOTPATCH flag: https://docs.microsoft.com/sv-se/cpp/build/reference/hotpatch-create-hotpatchable-image?view=msvc-170&viewFallbackFrom=vs-2019
The flag is translated to a new -fms-hotpatch flag, which in turn adds a 'patchable-function' attribute for each function in the TU. This is then picked up by the PatchableFunction pass which would generate a TargetOpcode::PATCHABLE_OP of minsize = 2 (which means the target instruction must resolve to at least two bytes). TargetOpcode::PATCHABLE_OP is only implemented for x86/x64. When targetting ARM/ARM64, /HOTPATCH isn't required (instructions are always 2/4 bytes and suitable for hotpatching).
Additionally, when using /Z7, we generate a 'hot patchable' flag in the CodeView debug stream, in the S_COMPILE3 record. This flag is then picked up by LLD (or link.exe) and is used in conjunction with the linker /FUNCTIONPADMIN flag to generate extra space before each function, to accommodate for live patching long jumps. Please see: d703b92296/lld/COFF/Writer.cpp (L1298)
The outcome is that we can finally use Live++ or Recode along with clang-cl.
NOTE: It seems that MSVC cl.exe always enables /HOTPATCH on x64 by default, although if we did the same I thought we might generate sub-optimal code (if this flag was active by default). Additionally, MSVC always generates a .debug$S section and a S_COMPILE3 record, which Clang doesn't do without /Z7. Therefore, the following MSVC command-line "cl /c file.cpp" would have to be written with Clang such as "clang-cl /c file.cpp /HOTPATCH /Z7" in order to obtain the same result.
Depends on D43002, D80833 and D81301 for the full feature.
Differential Revision: https://reviews.llvm.org/D116511
The GlobalISel combiner currently uses sign extension when manipulating
the LHS constant when combining a sequence of the following sequence of
machine instructions into a single constant:
```
%0:_(s32) = G_CONSTANT i32 <CONSTANT>
%1:_(p0) = G_INTTOPTR %0:_(s32)
%2:_(s64) = G_CONSTANT i64 <CONSTANT>
%3:_(p0) = G_PTR_ADD %1:_, %2:_(s64)
```
This causes an issue when the bit width of the first contant and the
target pointer size are different, as G_INTTOPTR has no sign extension
semantics.
This patch fixes this by capture an arbitrary precision in when matching
the constant, allowing the matching function to correctly zero extend
it.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D116941
The tensorflow AOT compiler can cross-target, but it can't run on (for
example) arm64. We added earlier support where the AOT-ed header and object
would be built on a separate builder and then passed at build time to
a build host where the AOT compiler can't run, but clang can be otherwise
built.
To simplify such scenarios given we now support more than one AOT-able
case (regalloc and inliner), we make the AOT scenario centered on whether
files are generated, case by case (this includes the "passed from a
different builder" scenario).
This means we shouldn't need an 'umbrella' LLVM_HAVE_TF_AOT, in favor of
case by case control. A builder can opt out of an AOT case by passing that case's
model path as `none`. Note that the overrides still take precedence.
This patch controls conditional compilation with case-specific flags,
which can be enabled locally, for the component where those are
available. We still keep an overall flag for some tests.
The 'development/training' mode is unchanged, because there the model is
passed from the command line and interpreted.
Differential Revision: https://reviews.llvm.org/D117752
Instead of constructing DebugVariables and looking up the order
in the comparison function, compute the order upfront and then sort
a vector of (order, instr).
This improves compile-time by -0.4% geomean on CTMark ReleaseLTO-g.
Differential Revision: https://reviews.llvm.org/D117575
This patch writes the full -cc1 command into the resulting .OBJ, like MSVC does. This allows for external tools (Recode, Live++) to rebuild a source file without any external dependency but the .OBJ itself (other than the compiler) and without knowledge of the build system.
The LF_BUILDINFO record stores a full path to the compiler, the PWD (CWD at program startup), a relative or absolute path to the source, and the full CC1 command line. The stored command line is self-standing (does not depend on the environment). In the same way, MSVC doesn't exactly store the provided command-line, but an expanded version (a somehow equivalent of CC1) which is also self-standing.
For more information see PR36198 and D43002.
Differential Revision: https://reviews.llvm.org/D80833
This prevents crashes in the OpenMP offload pipeline as not everything
is properly annotated with debug information, e.g., the runtimes we link
in. While we might want to have them annotated, it seems to be generally
useful to gracefully handle missing debug info rather than crashing.
TODO: A test is missing and can hopefully be distilled prior to landing.
This fixes#51079.
Differential Revision: https://reviews.llvm.org/D116959
The bulk of the implementation is common between 'release' mode (==AOT-ed
model) and 'development' mode (for training), the main difference is
that in development mode, we may also log features (for training logs),
inject scoring information (currently after the Virtual Register
Rewriter) and then produce the log file.
This patch also introduces the score injection pass, 'Register
Allocation Pass Scoring', which is trivially just logging the score in
development mode.
Differential Revision: https://reviews.llvm.org/D117147
This was ignoring the requested result register, resulting in a
missing def when this happened in the IRTranslator. Fixes some crashes
and verifier errors at -O0.
Alternatively we could pass DstOps to the constant fold functions.
This extends the code in SearchForAndLoads to be able to look through
ANY_EXTEND nodes, which can be created from mismatching IR types where
the AND node we begin from only demands the low parts of the register.
That turns zext and sext into any_extends as only the low bits are
demanded. To be able to look through ANY_EXTEND nodes we need to handle
mismatching types in a few places, potentially truncating the mask to
the size of the final load.
Recommitted with a more conservative check for the type of the extend.
Differential Revision: https://reviews.llvm.org/D117457
This fixes a verifier error I ran into at -O0. A subregister copy had
an implicit kill of an overlapping superregister, which was partially
redefined by the copy. The preserved implicit operand killed
subregisters made live earlier in the sequence. AMDGPU already uses
similar logic for whether to preserve the kill of the superregister on
the final instruction if there's overlap.
This patch fixes a case where the 'align' parameter attribute on the
pointer operands to llvm.vp.gather and llvm.vp.scatter was being dropped
during the conversion to the SelectionDAG. The default alignment equal
to the ABI type alignment of the vector type was kept. It also updates
the documentation to reflect the fact that the parameter attribute is
now properly supported.
The default alignment of these intrinsics was previously documented as
being equal to the ABI alignment of the *scalar* type, when in fact that
wasn't the case: the ABI alignment of the vector type was used instead.
This has also been fixed in this patch.
Reviewed By: simoll, craig.topper
Differential Revision: https://reviews.llvm.org/D114423
This was noted as a potential cleanup in D117508.
getShiftAmountTy() has checks for vector, phase, etc. so it should
handle anything that the caller was trying to account for.
Just replacing std::map with DenseMap here is a major regression
-- because this code used an identity hash for ValueIDNum.
Because ValueIDNum is composed of multiple components, it is
important that we use a reasonably good hash function here, so
switch it to hash_value. DenseMapInfo::getHashValue<uint64_t>
would not be sufficient.
This gives a -0.8% geomean improvement on CTMark ReleaseLTO-g.
For AMDGPU, any use of the physical register EXEC prevents sinking even if it is not a real physical register read. Add check to see if a physical
register use can be ignored for sinking.
Also perform same constant and ignorable physical register check when considering sinking in loops.
https://reviews.llvm.org/D116053
When widening these intrinsics, we do not have to insert neutral
elements at the end of the vector as when widening vector.reduce.*
intrinsics, thanks to vector predication semantics.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117467
This caused builds to fail with
llvm/lib/CodeGen/SelectionDAG/DAGCombiner.cpp:5638:
bool (anonymous namespace)::DAGCombiner::BackwardsPropagateMask(llvm::SDNode *):
Assertion `NewLoad && "Shouldn't be masking the load if it can't be narrowed"' failed.
See the code review for a link to a reproducer.
> This extends the code in SearchForAndLoads to be able to look through
> ANY_EXTEND nodes, which can be created from mismatching IR types where
> the AND node we begin from only demands the low parts of the register.
> That turns zext and sext into any_extends as only the low bits are
> demanded. To be able to look through ANY_EXTEND nodes we need to handle
> mismatching types in a few places, potentially truncating the mask to
> the size of the final load.
>
> Differential Revision: https://reviews.llvm.org/D117457
This reverts commit 578008789f.
Split vp.reduction.* intrinsics by splitting the vector to reduce in
two halves, perform the reduction operation in each one of them and
accumulate the results of both operations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117469
Commit 2bddab25db removed a piece of code from
DwarfDebug::emitDebugLocEntry that according to code comments
"Make sure comments stay aligned".
This patch restores that piece of code, together with the addition
of some extra checks in an existing lit test to work as a regression
test. Without this patch we incorrectly get
.byte 159 # 0
instead of
.byte 159 # DW_OP_stack_value
Differential Revision: https://reviews.llvm.org/D117441
A possible codegen regression for PowerPC is noted in D117406
because we don't recognize a pattern that demands only 1 byte
from a bswap.
This fold has existed in IR since close to the beginning of LLVM:
https://github.com/llvm/llvm-project/blame/main/llvm/lib/Transforms/InstCombine/InstCombineSimplifyDemanded.cpp#L794
...so this patch copies that code as much as possible and adapts
it for SDAG.
The test for PowerPC that would change in D117406 is over-reduced
with undefs, so I recreated it for AArch64 and x86 by passing in
pointer args and renamed the values to make the logic clearer.
Differential Revision: https://reviews.llvm.org/D117508
This extends the code in SearchForAndLoads to be able to look through
ANY_EXTEND nodes, which can be created from mismatching IR types where
the AND node we begin from only demands the low parts of the register.
That turns zext and sext into any_extends as only the low bits are
demanded. To be able to look through ANY_EXTEND nodes we need to handle
mismatching types in a few places, potentially truncating the mask to
the size of the final load.
Differential Revision: https://reviews.llvm.org/D117457
When we know the value we're extending is a negative constant then it
makes sense to use SIGN_EXTEND because this may improve code quality in
some cases, particularly when doing a constant splat of an unpacked vector
type. For example, for SVE when splatting the value -1 into all elements
of a vector of type <vscale x 2 x i32> the element type will get promoted
from i32 -> i64. In this case we want the splat value to sign-extend from
(i32 -1) -> (i64 -1), whereas currently it zero-extends from
(i32 -1) -> (i64 0xFFFFFFFF). Sign-extending the constant means we can use
a single mov immediate instruction.
New tests added here:
CodeGen/AArch64/sve-vector-splat.ll
I believe we see some code quality improvements in these existing
tests too:
CodeGen/AArch64/reduce-and.ll
CodeGen/AArch64/unfold-masked-merge-vector-variablemask.ll
The apparent regressions in CodeGen/AArch64/fast-isel-cmp-vec.ll only
occur because the test disables codegen prepare and branch folding.
Differential Revision: https://reviews.llvm.org/D114357
Update code comments in DAGCombiner::ReduceLoadWidth and refactor
the handling of SRL a bit. The refactoring is done with the intent
of adding support for folding away SRA by using SEXTLOAD in a
follow-up patch.
The function is also renamed as DAGCombiner::reduceLoadWidth.
Differential Revision: https://reviews.llvm.org/D117104
Use the AttributeSet constructor instead. There's no good reason
why AttrBuilder itself should exact the AttributeSet from the
AttributeList. Moving this out of the AttrBuilder generally results
in cleaner code.
Original patch by @hussainjk.
This patch was split off from D109377 to keep vector legalization
(widening/splitting) separate from vector element legalization
(promoting).
While the original patch added a third overload of
SelectionDAG::getVPStore, this patch takes the liberty of collapsing
those all down to 1, as three overloads seems excessive for a
little-used node.
The original patch also used ModifyToType in places, but that method
still crashes on scalable vector types. Seeing as the other VP
legalization methods only work when all operands need identical
widening, this patch follows in that vein.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117235
This seems to be a leftover from a long time ago when there was
an ISD::VBIT_CONVERT and a MVT::Vector. It looks like in those days
the vector type was carried in a VTSDNode.
As far as I know, these days ComputeValueTypes would have already
assigned "Result" the same type we're getting from TLI.getValueType
here. Thus the BITCAST is always a NOP. Verified by adding an assert
and running check-llvm.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D117335
This commit sometimes causes a crash when compiling a vtable thunk. E.g.:
clang '--target=aarch64-grtev4-linux-gnu' -xc++ - -c -o /dev/null <<EOF
struct a {
virtual int f();
};
struct c {
virtual int &g() const;
};
struct d : a, c {
int &g() const;
};
int &d::g() const {}
EOF
Some follow-up commits have been reverted as well:
Revert "IR: Make getRetAlign check callee function attributes"
Revert "Fix MSVC "32-bit shift implicitly converted to 64 bits" warning. NFC."
Revert "Fix MSVC "32-bit shift implicitly converted to 64 bits" warning. NFC."
This reverts commit 4f414af6a7.
This reverts commit a5507d2e25.
This reverts commit 3d2d208f6a.
This reverts commit 07ddfa95e3.
IR:
- globals (and functions, ifuncs, aliases) can have a partition
- catchret has a `to` before the label
- the sint/int types do not exist
- signext comes after the type
- a variable was missing its type
TableGen:
- The second value after a `#` concatenation is optional
See e.g. llvm/lib/Target/X86/X86InstrAVX512.td:L3351
- IncludeDirective and PreprocessorDirective were never referenced in
the grammar
- Add some missing ;
- Parent classes of multiclasses can have generic arguments.
Reuse the `ParentClassList` that is already used in other places.
MIR:
- liveins only allows physical registers, which start with a $
Differential Revision: https://reviews.llvm.org/D116674
When we know the value we're extending is a negative constant then it
makes sense to use SIGN_EXTEND because this may improve code quality in
some cases, particularly when doing a constant splat of an unpacked vector
type. For example, for SVE when splatting the value -1 into all elements
of a vector of type <vscale x 2 x i32> the element type will get promoted
from i32 -> i64. In this case we want the splat value to sign-extend from
(i32 -1) -> (i64 -1), whereas currently it zero-extends from
(i32 -1) -> (i64 0xFFFFFFFF). Sign-extending the constant means we can use
a single mov immediate instruction.
New tests added here:
CodeGen/AArch64/sve-vector-splat.ll
I believe we see some code quality improvements in these existing
tests too:
CodeGen/AArch64/dag-numsignbits.ll
CodeGen/AArch64/reduce-and.ll
CodeGen/AArch64/unfold-masked-merge-vector-variablemask.ll
The apparent regressions in CodeGen/AArch64/fast-isel-cmp-vec.ll only
occur because the test disables codegen prepare and branch folding.
Differential Revision: https://reviews.llvm.org/D114357
This wasn't running at -O0, and causing crashes for AMDGPU. AMDGPU
needs this to match the addressing modes of stack access instructions,
which is even more important at -O0 than with optimizations.
It currently costs nothing to run ahead of time, so just always enable
it.
In a future change, AMDGPU will have 2 emergency scavenging indexes in
some situations. The secondary scavenging index ends up being used
recursively when the scavenger calls eliminateFrameIndex for the
emergency spill slot. Without this, it would end up seeing the same
register which was just scavenged in the parent call as free, inserts
a second emergency spill to the same location and returns the same
register when 2 unique free registers are required.
We need to only do this if the register is used. SystemZ uses 2
scavenging slots, but calls the scavenger twice in sequence and not
recursively. In this case the previously scavenged register can be
re-clobbered, but is still tracked in the scavenger until it sees the
deferred restore instruction.
This was inserting the new G_CONSTANT after the use, and the later
block scan would run off the end. Fix calling SkipPHIsAndLabels for no
apparent reason.
Fma combine assumes that MRI.getVRegDef(Reg)->getOperand(0).getReg() = Reg
which is not true when Reg is defined by instruction with multiple defs
e.g. G_UNMERGE_VALUES.
Fix is to keep register and the instruction that defines register in
DefinitionAndSourceRegister and use when needed.
Differential Revision: https://reviews.llvm.org/D117032
This ports the `.cg_profile` assembly directive and call graph profile section
generation to MachO from COFF/ELF. Due to MachO section naming rules, the
section is called `__LLVM,__cg_profile` rather than `.llvm.call-graph-profile`
as in COFF/ELF. Support for llvm-readobj is included to facilitate testing.
Corresponding LLD change is D112164
Differential Revision: https://reviews.llvm.org/D112160
This feature was previously controlled by a TargetOptions flag, and I
figured that codegen::InitTargetOptionsFromCodeGenFlags would default it
to "on" for all frontends. Enabling by default was discussed here:
https://lists.llvm.org/pipermail/llvm-dev/2021-November/153653.html
and originally supposed to happen in 3c04507088, but it didn't actually
take effect, as it turns out frontends initialize TargetOptions themselves.
This patch moves the flag from a TargetOptions flag to a global flag to
CodeGen, where it isn't immediately affected by the frontend being used.
Hopefully this will actually cause instr-ref to be on by default on x86_64
now!
This patch is easily reverted, and chances of turbulence are moderately
high. If you need to revert, please consider instead commenting out the
'return true' part of llvm::debuginfoShouldUseDebugInstrRef to turn the
feature off, and dropping me an email.
Differential Revision: https://reviews.llvm.org/D116821
SizeOf() method of DIE values(unsigned SizeOf(const AsmPrinter *AP, dwarf::Form Form) const)
depends on AsmPrinter. AsmPrinter is too specific class here. This patch removes dependency
on AsmPrinter and use dwarf::FormParams structure instead. It allows calculate DIE values
size without using AsmPrinter. That refactoring is useful for D96035([dsymutil][DWARFlinker]
implement separate multi-thread processing for compile units.)
Differential Revision: https://reviews.llvm.org/D116997
This adds support for STRICT_FSETCC(quiet) and STRICT_FSETCCS(signaling).
FEQ matches well to STRICT_FSETCC oeq.
FLT/FLE matches well to STRICT_FSETCCS olt/ole.
Others require commuting operands or multiple instructions.
STRICT_FSETCC olt/ole/ogt/oge/ult/ule/ugt/uge uses FLT/FLE,
but we need to save/restore FFLAGS around them to avoid spurious
exceptions. I've implemented pseudo instructions with a
CustomInserter to insert the save/restore CSR instructions.
Unfortunately, this doesn't honor exceptions for signaling NANs
but I'm not sure if signaling nans are really supported by the
constrained intrinsics.
STRICT_FSETCC one and ueq expand to a pair of FLT instructions
with a save/restore of fflags around each. This could be improved
in the future.
There may be some opportunities to generate better code for strict
comparisons mixed with nonans fast math flags. I've left FIXMEs in
the .td files for that.
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Reviewed By: arcbbb
Differential Revision: https://reviews.llvm.org/D116694
Completely rework how we handle X constrained labels for inline asm.
X should really be treated as i. Then existing tests can be moved to use
i D115410 and clang can just emit i D115311. (D115410 and D115311 are
callbr, but this can be done for label inputs, too).
Coincidentally, this simplification solves an ICE uncovered by D87279
based on assumptions made during D69868.
This is the third approach considered. See also discussions v1 (D114895)
and v2 (D115409).
Reported-by: kernel test robot <lkp@intel.com>
Fixes: https://github.com/ClangBuiltLinux/linux/issues/1512
Reviewed By: void, jyknight
Differential Revision: https://reviews.llvm.org/D115688
As pointed out in https://reviews.llvm.org/D115688#inline-1108193, we
don't want to sink the save point past an INLINEASM_BR, otherwise
prologepilog may incorrectly sink a prolog past the MBB containing an
INLINEASM_BR and into the wrong MBB.
ShrinkWrap is getting this wrong because LR is not in the list of callee
saved registers. Specifically, ShrinkWrap::useOrDefCSROrFI calls
RegisterClassInfo::getLastCalleeSavedAlias which reads
CalleeSavedAliases which was populated by
RegisterClassInfo::runOnMachineFunction by iterating the list of
MCPhysReg returned from MachineRegisterInfo::getCalleeSavedRegs.
Because PPC's LR is non-allocatable, it's NOT considered callee saved.
Add an interface to TargetRegisterInfo for such a case and use it in
Shrinkwrap to ensure we don't sink a prolog past an INLINEASM or
INLINEASM_BR that clobbers LR.
Reviewed By: jyknight, efriedma, nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D116424
I've changed the definition of the experimental.vector.splice
instrinsic to reject indices that are known to be or possibly
out-of-bounds. In practice, this means changing the definition so that
the index is now only valid in the range [-VL, VL-1] where VL is the
known minimum vector length. We use the vscale_range attribute to
take the minimum vscale value into account so that we can permit
more indices when the attribute is present.
The splice intrinsic is currently only ever generated by the vectoriser,
which will never attempt to splice vectors with out-of-bounds values.
Changing the definition also makes things simpler for codegen since we
can always assume that the index is valid.
This patch was created in response to review comments on D115863
Differential Revision: https://reviews.llvm.org/D115933
This commit fixes a missed opportunity in merging consecutive stores.
The code that searches for stores skipped the case of stores that
directly connect to the root. The comment above the implementation lists
this case but the code did not handle it. I found this pattern when
looking into the shared_ptr destructor. GCC generates the right
sequence. Here is a small repo:
int foo(int* buff) {
buff[0] = 0;
int x = buff[1];
buff[1] = 0;
return x;
}
Differential Revision: https://reviews.llvm.org/D116895
This patch simplifies the interface between RAGreedy and the eviction
adviser by passing the allocator to the adviser, which allows the latter
to extract needed information as needed, rather than requiring it be passed
piecemeal at construction time (which would also complicate later
evolution).
Part of this, the patch also moves ExtraRegInfo back to RAGreedy. We
keep the encapsulation of ExtraRegInfo because it has benefits (e.g.
improved readability by abstracting access to the cascade info) and also
simpler re-initialization at regalloc pass re-entry time (we just flush
the Optional).
Differential Revision: https://reviews.llvm.org/D116669
These nodes should saturate to their saturating VT. We can use this
information to know the bits past the VT are all zeros or all sign bits.
I think we might only have test coverage for the unsigned case. I'll
verify and add tests.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D116870
This diff renames emitCalleeSavedFrameMoves to avoid conflicts with
non-virtual methods of derived classes having the same name but different semantics.
E.g. the class AArch64FrameLowering used to have (non-virtual) "emitCalleeSavedFrameMoves"
but it started to override TargetFrameLowering::emitCalleeSavedFrameMoves after
https://github.com/llvm/llvm-project/commit/c3e6555616 though its usage and semantics didn't change.
P.S. for x86 there was no conflict because the signature of
non-virtual X86FrameLowering::emitCalleeSavedFrameMoves is different
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D114140
Change CombinerHelper::matchBitfieldExtractFromShrAnd to use
getPreferredShiftAmountTy for the shift-amount-like operands of G_UBFX
just like all the other G_[SU]BFX combines do. This better matches the
AMDGPU legality rules for these instructions.
Differential Revision: https://reviews.llvm.org/D116803
1. Fix CombinerHelper::matchBitfieldExtractFromAnd to check legality
with the correct types for the G_UBFX that it builds.
2. Fix AMDGPUTargetLowering::isConstantUnsignedBitfieldExtractLegal to
match the legality rules: result and first operand can be s32 or s64
but the "shift amount" operands are always s32.
3. Add AMDGPU tests where the post-legalizer combiner would create
illegal MIR without the above fixes.
Differential Revision: https://reviews.llvm.org/D116802
This is the last part of D116531. Fetch the type of the indirect
inline asm operand from the elementtype attribute, rather than
the pointer element type.
Fixes https://github.com/llvm/llvm-project/issues/52928.
Split vp.select in a similar way as vselect, splitting also the length
parameter.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D116651
We can either check the opcode or number of operands or use
ISD::isVPOpcode inside the methods.
In some places I've used number of operands figuring that it is
cheaper than isVPOpcode. I've included isVPOpcode in an assert to
verify.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D116578
The current AsmPrinter has support to emit the "Max Skip" operand
(the 3rd of .p2align), however has no support for it to actually be specified.
Adding MaxBytesForAlignment to MachineBasicBlock provides this capability on a
per-block basis. Leaving the value as default (0) causes no observable differences
in behaviour.
Differential Revision: https://reviews.llvm.org/D114590
Unsigned compares work with either zero extended or sign extended
inputs just like equality comparisons. I didn't allow this when
I refactored the code in D116421 due to lack of tests. But I've
since found a simple C test case that demonstrates when this can be
useful.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D116617
D111404 moved a 4/8 byte check assert into a block taken by 2-byte platforms.
Since these platforms do not take the branches where the pointer size is used,
sink the assert accordingly.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D116480
We need to reuse them for the ML regalloc eviction advisor, as we
'explode' the weight calculation into sub-features.
Differential Revision: https://reviews.llvm.org/D116074
This was suggested in D114831. It should simplify the relation between
eviction advisor and the allocator, and simplify ingesting more features
tied to the internals of the allocator, in the future.
This change simply pulls out RAGreedy, places it in the llvm namespace,
and cleans up a bit the includes in the new header file.
Differential Revision: https://reviews.llvm.org/D116114
Use the VPIntrinsics.def's LEGALPOS that is specified with every VP
SDNode to determine which return or operand value type shall be used to
infer the legalization action.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D116594
Currently, the code in TargetLoweringObjectFile only assigns
@init_array section type to plain .init_array sections, but not
prioritized sections like .init_array.00001.
This is inconsistent with the interpretation in the AsmParser
(see 791523bae6/llvm/lib/MC/MCParser/ELFAsmParser.cpp (L621-L632))
and upcoming expectations in LLD
(see https://github.com/rust-lang/rust/issues/92181 for context).
This patch assigns @init_array section type to all sections with an
.init_array prefix. The same is done for .fini_array and
.preinit_array as well. With that, the logic matches the AsmParser.
Differential Revision: https://reviews.llvm.org/D116528
This function returns an upper bound on the number of bits needed
to represent the signed value. Use "Max" to match similar functions
in KnownBits like countMaxActiveBits.
Rename APInt::getMinSignedBits->getSignificantBits. Keeping the old
name around to keep this patch size down. Will do a bulk rename as
follow up.
Rename KnownBits::countMaxSignedBits->countMaxSignificantBits.
Reviewed By: lebedev.ri, RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D116522
This reverts commit fd4808887e.
This patch causes gcc to issue a lot of warnings like:
warning: base class ‘class llvm::MCParsedAsmOperand’ should be
explicitly initialized in the copy constructor [-Wextra]
This is similar to what is done for targets that prefer zero extend
where we avoid using a zero extend if the promoted values are sign
extended.
We'll also check for zero extended operands for ugt, ult, uge, and ule when the
target prefers sign extend. This is different than preferring zero extend, where
we only check for sign bits on equality comparisons.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D116421
The 'New' only makes sense in the context of these being
output arguments, but they are also used as inputs first.
Drop the 'New' and just call them LHS/RHS.
Factored out of D116421.
This patch adds isel support for STRICT_LRINT/LLRINT/LROUND/LLROUND.
It also adds test cases for f32 and f64 constrained intrinsics that
correspond to the intrinsics in float-intrinsics.ll and
double-intrinsics.ll. Support for promoting the integer argument of
STRICT_FPOWI was added.
I've skipped adding tests for f16 intrinsics, since we don't have libcalls
for them and we have inconsistent support for promoting them in LegalizeDAG.
This will need to be examined more closely.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D116323
D43002 introduced a test debug-info-objname.cpp that outputted the current compiler version into CodeView. Internally we appended a date to the patch version and overflowed the 16-bits allocated to that space. This change clamps the Frontend version outputted values to 16-bits like rGd1185fc081ead71a8bf239ff1814f5ff73084c15 did for the Backend version.
Testing:
ninja check-all
newly added tests correctly clamps and no longer asserts when trying to output the field
Reviewed By: aganea
Differential Revision: https://reviews.llvm.org/D116243
getShiftAmountTy used to directly return the shift amount type from
the target which could be too small for large illegal types. For
example, X86 always returns i8.
The code here detected this and used i32 instead if it won't fit. This
behavior was added to getShiftAmountTy in D112469 so we no longer need
this workaround.
Instead of hashing DIE offsets, hash DIE references the same as they
would be when used outside of a loclist - that is, deep hash the type on
first use, and hash the numbering on subsequent uses.
This does produce different hashes for different type references, where
it did not before (because we were hashing zero all the time - so it
didn't matter what type was referenced, the hash would be identical).
This also allows us to enforce that the DIE offset (& size) is not
queried before it is used (which came up while investigating another bug
recently).
Causes invalid debug_gnu_pubnames (& I think non-gnu pubnames too) -
visible as 0 values for the offset in gnu pubnames. More details on the
original review in D115325.
This reverts commit 78d15a112c.
This reverts commit 54586582d3.
Try to revert D113741 once again.
This also reverts 0ac75e82ff (D114705)
as it causes LLDB's lldb-api.lang/cpp/nsimport.TestCppNsImport.py test
failure w/o D113741.
This reverts commit f9607d45f3.
Differential Revision: https://reviews.llvm.org/D116225
Fix issue in TargetLowering::expandROT where we only attempt to flip a rotation if the other direction has better support - this matches TargetLowering::expandFunnelShift
This allows us to enable ISD::ROTR lowering on SSE targets, which particularly simplifies/improves codegen for splat amount and AVX2 per-element shifts.
Artifact combiner is not able to access individual elements after using
LCMTy style merge/unmerge, extract and insert to change vector number of
elements (pad with undef or split to sub-vector instructions).
Use unmerge to individual elements instead and then merge elements into
requested types.
Change argument lowering for vectors and moreElementsVector to use
buildPadVectorWithUndefElements and buildDeleteTrailingVectorElements.
FewerElementsVector had a few helpers that had different behavior,
introduce new helper for most of the opcodes.
FewerElementsVector helper is more flexible since it can create leftover
instruction smaller then requested type (useful in case target wants to
avoid pad with undef and use fewer registers). If target does not want
leftover of different type it should call more elements first.
Some helpers were performing more elements first to have split without
leftover. Opcodes that used this helper use clampMaxNumElementsStrict
(does more elements first) in LegalizerInfo to avoid test changes.
Fixes failures caused by failing to combine artifacts created during
more/fewer elements vector.
Differential Revision: https://reviews.llvm.org/D114198
When the source has a series of assignments, users reasonably want to
have the debugger step through each one individually. Turn off the combine
for adjacent stores so we get this behavior at -O0.
Similar to D7181.
Reviewed By: spatel, xgupta
Differential Revision: https://reviews.llvm.org/D115808
This patch causes invalid DWARF to be generated in some cases of LTO +
Split DWARF - follow-up on the original review thread (D113741) contains
further detail and test cases.
This reverts commit 75b622a795.
This reverts commit b6ccca217c.
This reverts commit 514d374419.
Reland integrates build fixes & further review suggestions.
Thanks to @zturner for the initial S_OBJNAME patch!
Differential Revision: https://reviews.llvm.org/D43002
Also revert all subsequent fixes:
- abd1cbf5e5 [Clang] Disable debug-info-objname.cpp test on Unix until I sort out the issue.
- 00ec441253 [Clang] debug-info-objname.cpp test: explictly encode a x86 target when using %clang_cl to avoid falling back to a native CPU triple.
- cd407f6e52 [Clang] Fix build by restricting debug-info-objname.cpp test to x86.
With Control-Flow Integrity (CFI), the LowerTypeTests pass replaces
function references with CFI jump table references, which is a problem
for low-level code that needs the address of the actual function body.
For example, in the Linux kernel, the code that sets up interrupt
handlers needs to take the address of the interrupt handler function
instead of the CFI jump table, as the jump table may not even be mapped
into memory when an interrupt is triggered.
This change adds the no_cfi constant type, which wraps function
references in a value that LowerTypeTestsModule::replaceCfiUses does not
replace.
Link: https://github.com/ClangBuiltLinux/linux/issues/1353
Reviewed By: nickdesaulniers, pcc
Differential Revision: https://reviews.llvm.org/D108478
When the source has a series of assignments, users reasonably want to
have the debugger step through each one individually. Turn off the combine
for adjacent stores so we get this behavior at -O0.
Similar to D7181.
Differential Revision: https://reviews.llvm.org/D115808
Merge the node combines into a common DAGCombiner::visitFMinMax (like we do for IMINMAX).
Move the constant folding into SelectionDAG::foldConstantFPMath.
This allows us to fold the vecreduce-propagate-sd-flags.ll test as it reduces constants - so I've refactored it to take variables instead.
Differential Revision: https://reviews.llvm.org/D115952
We were using a function attribute to indicate a non-standard FP mode,
but now we can use intrinsics for that job as shown in the new tests.
Presumably the x86 asm could be improved for that IR with intrinsics,
but I have not worked out exactly how to do that. Note that the
transform to FTRUNC still requires a hacky check for "nsz" (because
FMF are not applied to FP casts).
This is a cleanup based on the clang change in D115804 / 8c7f2a4f87 .
This is effectively a revert of 5a90285bd9 + D46237 .
Differential Revision: https://reviews.llvm.org/D115885
Replace custom constant scalar/splat folding with FoldConstantArithmetic call and canonicalize commutative constant ops to the RHS before the SimplifyVBinOp call
This extends the custom lowering for truncating stores on
fixed length vectors in SVE to support masked truncating stores.
It also adds a DAG combine for truncates followed by masked
stores.
Reviewed By: peterwaller-arm, paulwalker-arm
Differential Revision: https://reviews.llvm.org/D108115
SimplifyVBinOp still has a FoldConstantArithmetic call, which now it isn't vector specific we should be able to remove (once fp binops are tidied up); but we can at least clean up the integer opcodes to perform the basic constant/undef handling in common code first.
Fixes https://llvm.org/PR51087: Extraneous enum record in DWARF with type units.
As explained in PR51087 we sometimes get skeleton DIEs for enums in a Dwarf
Compile Unit (CU) that are not referenced from any CU and are already described
by a type unit.
Types for enums are emitted whether used or not, all together before most types
in the CU. Mechanically, the extraneous CU records are generated because the
enum types are generated with a call to CU->getOrCreateTypeDIE. This function
will recursively get-or-create the parent DIE (in the CU) and the type unit for
each. We don't need the CU-side DIEs if the type units are sucesfully
emitted. Fix by only emitting the type units for enums if possible, falling back
to a call to getOrCreateTypeDIE if not. Do the same for retained types.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D115325
This patch introduces the eviction analysis and the eviction advisor,
the default implementation, and the scaffolding for introducing the
other implementations of the advisor.
Differential Revision: https://reviews.llvm.org/D115707
Add the llvm flag `-debug-info-correlate` to attach debug info to instrumentation counters so we can correlate raw profile data to their functions. Raw profiles are dumped as `.proflite` files. The next diff enables `llvm-profdata` to consume `.proflite` and debug info files to produce a normal `.profdata` profile.
Part of the "lightweight instrumentation" work: https://groups.google.com/g/llvm-dev/c/r03Z6JoN7d4
The original diff https://reviews.llvm.org/D114565 was reverted because of the `Instrumentation/InstrProfiling/debug-info-correlate.ll` test, which is fixed in this commit.
Reviewed By: kyulee
Differential Revision: https://reviews.llvm.org/D115693
These were detected by the new -Wauto-by-value-copy (D114989) warning, these by-value
constant copies need only be references.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D114990
D112556 added verification that the live interval for a subreg operand
must have subranges. This patch fixes a corner case, where if all subreg
operands for a particular register are undef uses then no subranges
are required. This matches how LiveIntervalCalc would build the live
intervals in the first place, since an undef use is not considered
to read the register.
Before this patch, CodeGen/AMDGPU/no-remat-indirect-mov.mir would fail
with -early-live-intervals:
# After Live Interval Analysis
...
*** Bad machine code: Live interval for subreg operand has no subranges ***
- function: index_vgpr_waterfall_loop
- basic block: %bb.1 (0x6a9a968) [352B;496B)
- instruction: 432B %24:vgpr_32 = V_MOV_B32_e32 undef %18.sub0:vreg_512, implicit $exec, implicit %18:vreg_512, implicit $m0
- operand 1: undef %18.sub0:vreg_512
Differential Revision: https://reviews.llvm.org/D115360
When references to the symbol `swift_async_extendedFramePointerFlags`
are emitted they have to be weak.
References to the symbol `swift_async_extendedFramePointerFlags` get
emitted only by frame lowering code. Therefore, the backend needs to track
references to the symbol and mark them weak.
Differential Revision: https://reviews.llvm.org/D115672
Summary:
This patch emits the DW_AT_accessibility attribute for
class/struct/union types in the LLVM part.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D115606
Fix a couple of things that were causing stack protection to not work
correctly in functions that have scalable vectors on the stack:
* Use TypeSize when determining if accesses to a variable are
considered out-of-bounds so that the behaviour is correct for
scalable vectors.
* When stack protection is enabled move the stack protector location
to the top of the SVE locals, so that any overflow in them (or the
other locals which are below that) will be detected.
Fixes: https://github.com/llvm/llvm-project/issues/51137
Differential Revision: https://reviews.llvm.org/D111631
This reverts commit 800bf8ed29.
The `Instrumentation/InstrProfiling/debug-info-correlate.ll` test was
failing because I forgot the `llc` commands are architecture specific.
I'll follow up with a fix.
Differential Revision: https://reviews.llvm.org/D115689
Add the llvm flag `-debug-info-correlate` to attach debug info to instrumentation counters so we can correlate raw profile data to their functions. Raw profiles are dumped as `.proflite` files. The next diff enables `llvm-profdata` to consume `.proflite` and debug info files to produce a normal `.profdata` profile.
Part of the "lightweight instrumentation" work: https://groups.google.com/g/llvm-dev/c/r03Z6JoN7d4
Reviewed By: kyulee
Differential Revision: https://reviews.llvm.org/D114565
MachineOutliner may outline a "patchable-function-entry" function whose body has
a TargetOpcode::PATCHABLE_FUNCTION_ENTER MachineInstr. This is incorrect because
the special code sequence must stay unchanged to be used at run-time.
Avoid outlining PATCHABLE_FUNCTION_ENTER. While here, avoid outlining FENTRY_CALL too
(which doesn't reproduce currently) to allow phase ordering flexibility.
Fixes#52635
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D115614
LiveRangeEdit::allUsesAvailableAt checks that VNI at use is the same
as at the original use slot. However, the VNI can be the same while
a specific subrange needed for use can be dead at the new index.
This patch adds subrange liveness check if there is a subreg use.
Fixes: SWDEV-312810
Differential Revision: https://reviews.llvm.org/D115278
This would allow sharing the LiveRangeStageManager between different
RegAllocEvictionAdvisors. One scenario is for ML training, where we want
to capture what the default advisor would do, for bootstrapping (speeds
up training).
Differential Revision: https://reviews.llvm.org/D114831
-(Za + Zm * Zn) != (-Za + Zm * (-Zn))
when the FMA produces a zero output (e.g. all zero inputs can produce -0
output)
Add a PatFrag to check presence of nsz on the fneg, add tests which
ensure the combine does not fire in the absense of nsz.
See https://reviews.llvm.org/D90901 for a similar discussion on X86.
Differential Revision: https://reviews.llvm.org/D109525
This patch fixes an issue during SelectionDAG construction. When the
target is unable to lower the function's return value, a hidden sret
parameter is created. It is initialized and copied to a stored variable
(DemoteRegister) with CopyToReg and is later fetched with
CopyFromReg. The bug is that the chains used for each copy are
inconsistent, and thus in rare cases the scheduler may issue them out of
order.
The fix is to ensure that the CopyFromReg uses the DAG root which is set
as the chain corresponding to the initial CopyToReg.
Fixes https://llvm.org/PR52475
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D114795
DwarfExpression::addUnsignedConstant(const APInt &Value) only supports
wider-than-64-bit values when it is used to emit a top-level DWARF
expression representing the location of a variable. Before this change,
it was possible to call addUnsignedConstant on >64 bit values within a
subexpression when substituting DW_OP_LLVM_arg values.
This can trigger an assertion failure (e.g. PR52584, PR52333) when it
happens in a fragment (DW_OP_LLVM_fragment) expression, as
addUnsignedConstant on >64 bit values splits the constant into separate
DW_OP_pieces, which modifies DwarfExpression::OffsetInBits.
This change papers over the assertion errors by bailing on overly wide
DW_OP_LLVM_arg values. A more comprehensive fix might be to be to split
wide values into pointer-sized fragments.
[0] https://github.com/llvm/llvm-project/blob/e71fa03/llvm/lib/CodeGen/AsmPrinter/DwarfCompileUnit.cpp#L799-L805
Patch by Ricky Zhou!
Differential Revision: https://reviews.llvm.org/D115343
Previously we were using UADDO to generate a two-result value with
the unsigned addition and the overflow mask. We then combined the
overflow mask with the trip count comparison to get a result.
However, we don't need to do this - we can simply use a UADDSAT
saturating add node to add the vector index splat and the stepvector
together. Then we can just compare this to a splat of the trip count.
This results in overall better code quality for both Thumb2 and AArch64.
Differential Revision: https://reviews.llvm.org/D115354
Adds x-ray support for hexagon to llvm codegen, clang driver,
compiler-rt libs.
Differential Revision: https://reviews.llvm.org/D113638
Reapplying this after 543a9ad7c4,
which fixes the leak introduced there.
Reverts 02940d6d22. Fixes breakage in the modules build.
LLVM loops cannot represent irreducible structures in the CFG. This
change introduce the concept of cycles as a generalization of loops,
along with a CycleInfo analysis that discovers a nested
hierarchy of such cycles. This is based on Havlak (1997), Nesting of
Reducible and Irreducible Loops.
The cycle analysis is implemented as a generic template and then
instatiated for LLVM IR and Machine IR. The template relies on a new
GenericSSAContext template which must be specialized when used for
each IR.
This review is a restart of an older review request:
https://reviews.llvm.org/D83094
Original implementation by Nicolai Hähnle <nicolai.haehnle@amd.com>,
with recent refactoring by Sameer Sahasrabuddhe <sameer.sahasrabuddhe@amd.com>
Differential Revision: https://reviews.llvm.org/D112696
The existing code assumed fcmp to always be an Instruction, but it can also be a ConstExpr.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D115450
There is a pointer to the DataLayout in SelectionDAGBuilder called
'DL' that is hardly ever used. In most cases the code seems to just
use `DAG.getDataLayout()` instead. Given that DL is also often used
as a shadowed variable for the debug location it seems sensible to
just kill off the few remaining uses and be consistent with the rest
of the code.
Differential Revision: https://reviews.llvm.org/D114451
After D113888 / 32b6c17b29 the MMO size of a masked loads/store is
unknown. When we are converting back to a standard load/store because
the mask is known all ones, we can refine that to the correct size from
the size of the vector being loaded/stored.
Differential Revision: https://reviews.llvm.org/D114582
This patch extends LLVM IR to add metadata that can be used to emit macho files with two build version load commands.
It utilizes "darwin.target_variant.triple" and "darwin.target_variant.SDK Version" metadata names for that,
which will be set by a future patch in clang.
MachO uses two build version load commands to represent an object file / binary that is targeting both the macOS target,
and the Mac Catalyst target. At runtime, a dynamic library that supports both targets can be loaded from either a native
macOS or a Mac Catalyst app on a macOS system. We want to add support to this to upstream to LLVM to be able to build
compiler-rt for both targets, to finish the complete support for the Mac Catalyst platform, which is right now targetable
by upstream clang, but the compiler-rt bits aren't supported because of the lack of this multiple build version support.
Differential Revision: https://reviews.llvm.org/D112189
Add the calculation of a score, which will be used during ML training. The
score qualifies the quality of a regalloc policy, and is independent of
what we train (currently, just eviction), or the regalloc algo itself.
We can then use scores to guide training (which happens offline), by
formulating a reward based on score variation - the goal being lowering
scores (currently, that reward is percentage reduction relative to
Greedy's heuristic)
Currently, we compute the score by factoring different instruction
counts (loads, stores, etc) with the machine basic block frequency,
regardless of the instructions' provenance - i.e. they could be due to
the regalloc policy or be introduced previously. This is different from
RAGreedy::reportStats, which accummulates the effects of the allocator
alone. We explored this alternative but found (at least currently) that
the more naive alternative introduced here produces better policies. We
do intend to consolidate the two, however, as we are actively
investigating improvements to our reward function, and will likely want
to re-explore scoring just the effects of the allocator.
In either case, we want to decouple score calculation from allocation
algorighm, as we currently evaluate it after a few more passes after
allocation (also, because score calculation should be reusable
regardless of allocation algorithm).
We intentionally accummulate counts independently because it facilitates
per-block reporting, which we found useful for debugging - for instance,
we can easily report the counts indepdently, and then cross-reference
with perf counter measurements.
Differential Revision: https://reviews.llvm.org/D115195
A new basic block ordering improving existing MachineBlockPlacement.
The algorithm tries to find a layout of nodes (basic blocks) of a given CFG
optimizing jump locality and thus processor I-cache utilization. This is
achieved via increasing the number of fall-through jumps and co-locating
frequently executed nodes together. The name follows the underlying
optimization problem, Extended-TSP, which is a generalization of classical
(maximum) Traveling Salesmen Problem.
The algorithm is a greedy heuristic that works with chains (ordered lists)
of basic blocks. Initially all chains are isolated basic blocks. On every
iteration, we pick a pair of chains whose merging yields the biggest increase
in the ExtTSP value, which models how i-cache "friendly" a specific chain is.
A pair of chains giving the maximum gain is merged into a new chain. The
procedure stops when there is only one chain left, or when merging does not
increase ExtTSP. In the latter case, the remaining chains are sorted by
density in decreasing order.
An important aspect is the way two chains are merged. Unlike earlier
algorithms (e.g., based on the approach of Pettis-Hansen), two
chains, X and Y, are first split into three, X1, X2, and Y. Then we
consider all possible ways of gluing the three chains (e.g., X1YX2, X1X2Y,
X2X1Y, X2YX1, YX1X2, YX2X1) and choose the one producing the largest score.
This improves the quality of the final result (the search space is larger)
while keeping the implementation sufficiently fast.
Differential Revision: https://reviews.llvm.org/D113424
In the style of D113888, this patch updates the various VP memory
operations (load, store, gather, scatter) to use UnknownSize. This is
for the same reason as for masked loads and stores: the number of
elements accessed is not generally known at compile time.
This is somewhat pessimistic in the sense that we may still find
un-canonicalized intrinsics featuring both an all-true mask and an EVL
equal to the vector size. Arguably those should be canonicalized before
the SelectionDAG, so those have been left for future work.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D115036
This patch fixes a case where the 'align' parameter attribute on the
pointer operands to llvm.vp.load and llvm.vp.store was being dropped
during the conversion to the SelectionDAG. The default alignment
equal to the ABI type alignment of the vector type was kept. It also
updates the documentation to reflect the fact that the parameter
attribute is now properly supported.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D114422
LLVM loops cannot represent irreducible structures in the CFG. This
change introduce the concept of cycles as a generalization of loops,
along with a CycleInfo analysis that discovers a nested
hierarchy of such cycles. This is based on Havlak (1997), Nesting of
Reducible and Irreducible Loops.
The cycle analysis is implemented as a generic template and then
instatiated for LLVM IR and Machine IR. The template relies on a new
GenericSSAContext template which must be specialized when used for
each IR.
This review is a restart of an older review request:
https://reviews.llvm.org/D83094
Original implementation by Nicolai Hähnle <nicolai.haehnle@amd.com>,
with recent refactoring by Sameer Sahasrabuddhe <sameer.sahasrabuddhe@amd.com>
Differential Revision: https://reviews.llvm.org/D112696
DebugLoc is cheap to move, passing it by-val rather than const ref to
take advantage of the fact that it is consumed that way by the
MachineInstr ctor, which creates some optimization oportunities.
Differential Revision: https://reviews.llvm.org/D115208
The Pre-RA VLIWMachineScheduler used by Hexagon is a relatively generic
implementation that would make sense to use on other VLIW targets.
This commit lifts those classes into their own header/source file with the
root VLIWMachineScheduler. I chose this path rather than adding the
strategy et al. into MachineScheduler to avoid bloating the file with other
implementations.
Target-specific behaviors have been captured and replicated through
function overloads.
- Added an overloadable DFAPacketizer creation member function. This is
mainly done for our downstream, which has the capability to override
the DFAPacketizer with custom implementations. This is an upstreamable
TODO on our end. Currently, it always returns the result of
TargetInstrInfo::CreateTargetScheduleState
- Added an extra helper which returns the number of instructions in the
current packet. This is used in our downstream, and may be useful
elsewhere.
- Placed the priority heuristic values into the ConvergingVLIWscheduler
class instead of defining them as local statics in the implementation
- Added a overridable helper in ConvergingVLIWScheduler so that targets
can create their own VLIWResourceModel
Differential Revision: https://reviews.llvm.org/D113150
A new basic block ordering improving existing MachineBlockPlacement.
The algorithm tries to find a layout of nodes (basic blocks) of a given CFG
optimizing jump locality and thus processor I-cache utilization. This is
achieved via increasing the number of fall-through jumps and co-locating
frequently executed nodes together. The name follows the underlying
optimization problem, Extended-TSP, which is a generalization of classical
(maximum) Traveling Salesmen Problem.
The algorithm is a greedy heuristic that works with chains (ordered lists)
of basic blocks. Initially all chains are isolated basic blocks. On every
iteration, we pick a pair of chains whose merging yields the biggest increase
in the ExtTSP value, which models how i-cache "friendly" a specific chain is.
A pair of chains giving the maximum gain is merged into a new chain. The
procedure stops when there is only one chain left, or when merging does not
increase ExtTSP. In the latter case, the remaining chains are sorted by
density in decreasing order.
An important aspect is the way two chains are merged. Unlike earlier
algorithms (e.g., based on the approach of Pettis-Hansen), two
chains, X and Y, are first split into three, X1, X2, and Y. Then we
consider all possible ways of gluing the three chains (e.g., X1YX2, X1X2Y,
X2X1Y, X2YX1, YX1X2, YX2X1) and choose the one producing the largest score.
This improves the quality of the final result (the search space is larger)
while keeping the implementation sufficiently fast.
Differential Revision: https://reviews.llvm.org/D113424
Expanding on D109750.
Since `DBG_VALUE` instructions have final register validity determined in
`LDVImpl::handleDebugValue`, there is no apparent reason to immediately prune
unused register operands as their defs are erased. Consequently, this renders
`MachineInstr::eraseFromParentAndMarkDBGValuesForRemoval` moot; gaining a
substantial performance improvement.
The only necessary changes involve making relevant passes consider invalid
DBG_VALUE vregs uses as valid.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D112852
This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModule() to DwarfDebug::endModule().
Effectively, this changes nothing but the order of debug entities which
will be as follows:
* subprograms (including related context, local variables/labels,
local imported entities; related types can be created as a part of
the emission of local entities of an abstract subprogram);
* global variables (including related context and types);
* retained types and enums;
* non-local-scoped imported entities;
* basic types;
* other types left (as a part of local variables attributes emission).
Note that the order of emitted compile units may also be changed as now we emit
units that contain subprograms first and then all other non-empty units.
The motivation behind this change is the following:
(1) DwarfDebug::beginModule() is run at the very beginning of backend's pipeline,
from this time IR can be significantly changed by target-specific passes.
If it happens for debug metadata of global entities, those changes will not
be reflected in the emitted DWARF.
(2) imported subprogram names should refer to an abstract subprogram if it exists,
but it isn't known in DwarfDebug::beginModule() (it's possible to make some
guesses based on location info, but it's not quite reliable);
(3) aforementioned entities if they are scoped within a bracketed block
(subject of D113741) couldn't be emitted in DwarfDebug::beginModule()
(they need parent emitted first). Another problem is if to try to gather
some information about local entities and defer their emission
(till subprogram's processing or DwarfDebug::endModule()) all the gathered
details might be irrelevant / invalid by the time the entities are being
emitted (because of (1)).
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D114705
As an extension to D111976, this converts clamp fptosi, clamped between
0 and (2^n)-1 to a fptoui.sat. This can greatly help on targets with
conversions that naturally saturate, such as Arm.
X86 disables the transform as some of the test cases increases in size.
A fptoui.sat necessitates a fp clamp without native support, so there is
little use in converting if the instruction is just going to be
expanded.
Differential Revision: https://reviews.llvm.org/D112428
This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModule() to DwarfDebug::endModule().
Effectively, this changes nothing but the order of debug entities which
will be as follows:
* subprograms (including related context, local variables/labels,
local imported entities; related types can be created as a part of
the emission of local entities of an abstract subprogram);
* global variables (including related context and types);
* retained types and enums;
* non-local-scoped imported entities;
* basic types;
* other types left (as a part of local variables attributes emission).
Note that the order of emitted compile units may also be changed as now we emit
units that contain subprograms first and then all other non-empty units.
The motivation behind this change is the following:
(1) DwarfDebug::beginModule() is run at the very beginning of backend's pipeline,
from this time IR can be significantly changed by target-specific passes.
If it happens for debug metadata of global entities, those changes will not
be reflected in the emitted DWARF.
(2) imported subprogram names should refer to an abstract subprogram if it exists,
but it isn't known in DwarfDebug::beginModule() (it's possible to make some
guesses based on location info, but it's not quite reliable);
(3) aforementioned entities if they are scoped within a bracketed block
(subject of D113741) couldn't be emitted in DwarfDebug::beginModule()
(they need parent emitted first). Another problem is if to try to gather
some information about local entities and defer their emission
(till subprogram's processing or DwarfDebug::endModule()) all the gathered
details might be irrelevant / invalid by the time the entities are being
emitted (because of (1)).
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D114705
Prior to this patch, tail duplication handled debug info poorly -
specifically, debug instructions would be dropped instead of being set
undef, potentially extending the lifetimes of prior debug values that
should be killed. The pass was also very aggressive with dropping debug
info, dropping debug info even when the SSA value it referred to was
still present. This patch attempts to handle debug info more carefully,
checking to see whether each affected debug value can still be live,
setting it undef if not.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D106875
MVE can treat v16i1, v8i1, v4i1 and v2i1 as different views onto the
same 16bit VPR.P0 register, with v2i1 holding two 8 bit values for the
two halves. This was never treated as a legal type in llvm in the past
as there are not many 64bit instructions and no 64bit compares. There
are a few instructions that could use it though, notably a VSELECT (as
it can handle any size using the underlying v16i8 VPSEL), AND/OR/XOR for
similar reasons, some gathers/scatter and long multiplies and VCTP64
instructions.
This patch goes through and makes v2i1 a legal type, handling all the
cases that fall out of that. It also makes VSELECT legal for v2i64 as a
side benefit. A lot of the codegen changes as a result - usually in way
that is a little better or a little worse, but still expensive. Costs
can change a little too in the process, again in a way that expensive
things remain expensive. A lot of the tests that changed are mainly to
ensure correctness - the code can hopefully be improved in the future
where it comes up in practice.
The intrinsics currently remain using the v4i1 they previously did to
emulate a v2i1. This will be changed in a followup patch but this one
was already large enough.
Differential Revision: https://reviews.llvm.org/D114449
This patch begins extending handling for peeking through bitcast nodes to big-endian targets as well as the existing little-endian case.
Differential Revision: https://reviews.llvm.org/D114676
combinePMULH currently only truncates vXi32/vXi64 multiplies to PMULHW/PMULUW if the source operands are SEXT/ZEXT instructions for a 'free' truncation.
But we can generalize this to any source operand with sufficient leading sign/zero bits that would allow PACKS/PACKUS to be used as a 'cheap' truncation.
This helps us avoid the wider multiplies, in exchange for truncation on both source operands instead of the result.
Differential Revision: https://reviews.llvm.org/D113371
This patch implements a new MachineFunction in the ARM backend for
placing BTI instructions. It is similar to the existing AArch64
aarch64-branch-targets pass.
BTI instructions are inserted into basic blocks that:
- Have their address taken
- Are the entry block of a function, if the function has external
linkage or has its address taken
- Are mentioned in jump tables
- Are exception/cleanup landing pads
Each BTI instructions is placed in the beginning of a BB after the
so-called meta instructions (e.g. exception handler labels).
Each outlining candidate and the outlined function need to be in agreement about
whether BTI placement is enabled or not. If branch target enforcement is
disabled for a function, the outliner should not covertly enable it by emitting
a call to an outlined function, which begins with BTI.
The cost mode of the outliner is adjusted to account for the extra BTI
instructions in the outlined function.
The ARM Constant Islands pass will maintain the count of the jump tables, which
reference a block. A `BTI` instruction is removed from a block only if the
reference count reaches zero.
PAC instructions in entry blocks are replaced with PACBTI instructions (tests
for this case will be added in a later patch because the compiler currently does
not generate PAC instructions).
The ARM Constant Island pass is adjusted to handle BTI
instructions correctly.
Functions with static linkage that don't have their address taken can
still be called indirectly by linker-generated veneers and thus their
entry points need be marked with BTI or PACBTI.
The changes are tested using "LLVM IR -> assembly" tests, jump tables
also have a MIR test. Unfortunately it is not possible add MIR tests
for exception handling and computed gotos because of MIR parser
limitations.
This patch is part of a series that adds support for the PACBTI-M extension of
the Armv8.1-M architecture, as detailed here:
https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/armv8-1-m-pointer-authentication-and-branch-target-identification-extension
The PACBTI-M specification can be found in the Armv8-M Architecture Reference
Manual:
https://developer.arm.com/documentation/ddi0553/latest
The following people contributed to this patch:
- Mikhail Maltsev
- Momchil Velikov
- Ties Stuij
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D112426
The REM DAG combine uses the visitDivLike functions to try and get an
optimized DIV node to provide better codegen, however in some cases this
visitDivLike call ends up in the BuildSDIVPow2 target hook, which in
turn sometimes will return the same node passed in to indicate not to
change it. The REM DAG combine does not anticipate this and creates a
cycle in the DAG because of it.
Fix this by ensuring any such optimized div node returned is distinct
from the node being combined.
Differential Revision: https://reviews.llvm.org/D114716
This adds a fold in DAGCombine to create fptosi_sat from sequences for
smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
to be handled similarly.
A shouldConvertFpToSat method was added to control when converting may
be profitable. The original fptosi will have a less strict semantics
than the fptosisat, with less values that need to produce defined
behaviour.
This especially helps on ARM/AArch64 where the vcvt instructions
naturally saturate the result.
Differential Revision: https://reviews.llvm.org/D111976
It causes builds to fail with this assert:
llvm/include/llvm/ADT/APInt.h:990:
bool llvm::APInt::operator==(const llvm::APInt &) const:
Assertion `BitWidth == RHS.BitWidth && "Comparison requires equal bit widths"' failed.
See comment on the code review.
> This adds a fold in DAGCombine to create fptosi_sat from sequences for
> smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
> the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
> it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
> ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
> to be handled similarly.
>
> A shouldConvertFpToSat method was added to control when converting may
> be profitable. The original fptosi will have a less strict semantics
> than the fptosisat, with less values that need to produce defined
> behaviour.
>
> This especially helps on ARM/AArch64 where the vcvt instructions
> naturally saturate the result.
>
> Differential Revision: https://reviews.llvm.org/D111976
This reverts commit 52ff3b0093.
Over in D114631 and [0] there's a plan for turning instruction referencing
on by default for x86. This patch adds / removes all the relevant bits of
code, with the aim that the final patch is extremely small, for an easy
revert. It should just be a condition in CommandFlags.cpp and removing the
XFail on instr-ref-flag.ll.
[0] https://lists.llvm.org/pipermail/llvm-dev/2021-November/153653.html
InstrRefBasedLDV used to crash on the added test -- the exit block is not
in scope for the variable being propagated, but is still considered because
it contains an assignment. The failure-mode was vlocJoin ignoring
assign-only blocks and not updating DIExpressions, but pickVPHILoc would
still find a variable location for it. That led to DBG_VALUEs created with
the wrong fragment information.
Fix this by removing a filter inherited from VarLocBasedLDV: vlocJoin will
now consider assign-only blocks and will update their expressions.
Differential Revision: https://reviews.llvm.org/D114727
This adds a fold in DAGCombine to create fptosi_sat from sequences for
smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
to be handled similarly.
A shouldConvertFpToSat method was added to control when converting may
be profitable. The original fptosi will have a less strict semantics
than the fptosisat, with less values that need to produce defined
behaviour.
This especially helps on ARM/AArch64 where the vcvt instructions
naturally saturate the result.
Differential Revision: https://reviews.llvm.org/D111976
This change exposes isBuildVectorConstantSplat() to the llvm namespace
and uses it to implement the constant splat versions of
m_SpecificICst().
CombinerHelper::matchOrShiftToFunnelShift() can now work with vector
types and CombinerHelper::matchMulOBy2()'s match for a constant splat is
simplified.
Differential Revision: https://reviews.llvm.org/D114625
Currently we create register mappings for registers used only once in current
MBB. For registers with multiple uses, when all the uses are in the current MBB,
we can also create mappings for them similarly according to the last use.
For example
%reg101 = ...
= ... reg101
%reg103 = ADD %reg101, %reg102
We can create mapping between %reg101 and %reg103.
Differential Revision: https://reviews.llvm.org/D113193
There are 2 eviction queries. One is made by tryAssign, when it attempts to
free an interference occupying the hint of the candidate. The other is
during 'regular' interference resolution, where we scan over all
physical registers and try to see if we can evict live ranges in favor
of the candidate. We currently use the same logic in both cases, just
that the former never passes the cost to any subsequent query.
Technically, the 2 decisions could be implemented with different
policies.
This patch splits the 2.
RFC: https://lists.llvm.org/pipermail/llvm-dev/2021-November/153639.html
Differential Revision: https://reviews.llvm.org/D114019
If we have a variable where its fragments are split into overlapping
segments:
DBG_VALUE $ax, $noreg, !123, !DIExpression(DW_OP_LLVM_fragment_0, 16)
...
DBG_VALUE $eax, $noreg, !123, !DIExpression(DW_OP_LLVM_fragment_0, 32)
we should only propagate the most recently assigned fragment out of a
block. LiveDebugValues only deals with live-in variable locations, as
overlaps within blocks is DbgEntityHistoryCalculators domain.
InstrRefBasedLDV has kept the accumulateFragmentMap method from
VarLocBasedLDV, we just need it to recognise DBG_INSTR_REFs. Once it's
produced a mapping of variable / fragments to the overlapped variable /
fragments, VLocTracker uses it to identify when a debug instruction needs
to terminate the other parts it overlaps with. The test is updated for
some standard "InstrRef picks different registers" variation, and the
order of some unrelated DBG_VALUEs changes.
Differential Revision: https://reviews.llvm.org/D114603
Usually dbg.declares get translated into either entries in an MF
side-table, or a DBG_VALUE on entry to the function with IsIndirect set
(including in instruction referencing mode). Much rarer is a dbg.declare
attached to a non-argument value, such as in the test added in this patch
where there's a variable-length-array. Such dbg.declares become SDDbgValue
nodes with InIndirect=true.
As it happens, we weren't correctly emitting DBG_INSTR_REFs with the
additional indirection. This patch adds the extra indirection, encoded as
adding an additional DW_OP_deref to the expression.
Differential Revision: https://reviews.llvm.org/D114440
InstrRefBasedLDV observes when variable locations are clobbered, scans what
values are available in the machine, and re-issues a DBG_VALUE for the
variable if it can find another location. Unfortunately, I hadn't joined up
the Indirectness flag, so if it did this to an Indirect Value, the
indirectness would be dropped.
Fix this, and add a test that if we clobber a variable value (on the stack
in this case), then the recovered variable location keeps the Indirect
flag.
Differential Revision: https://reviews.llvm.org/D114378
This solves a problem with non-deterministic output from opt due
to not performing dominator tree updates in a deterministic order.
The problem that was analysed indicated that JumpThreading was using
the DomTreeUpdater via llvm::MergeBasicBlockIntoOnlyPred. When
preparing the list of updates to send to DomTreeUpdater::applyUpdates
we iterated over a SmallPtrSet, which didn't give a well-defined
order of updates to perform.
The added domtree-updates.ll test case is an example that would
result in non-deterministic printouts of the domtree. Semantically
those domtree:s are equivalent, but it show the fact that when we
use the domtree iterator the order in which nodes are visited depend
on the order in which dominator tree updates are performed.
Since some passes (at least EarlyCSE) are iterating over nodes in the
dominator tree in a similar fashion as the domtree printer, then the
order in which transforms are applied by such passes, transitively,
also depend on the order in which dominator tree updates are
performed. And taking EarlyCSE as an example the end result could be
different depending on in which order the transforms are applied.
Reviewed By: nikic, kuhar
Differential Revision: https://reviews.llvm.org/D110292
This allows the generic DAG combine to fold fp_extend/fp_trunc into
loads/stores which we can then lower into a integer extending
load/truncating store plus an FP_EXTEND/FP_ROUND.
The nuance here is that fixed-type FP_EXTEND/FP_ROUND require unpacked
types hence lowering them introduces an unpack/zip. By allowing these
nodes to be combined with loads/store we make it much easier to have
this unpack/zip combined into the load/store by our custom lowering.
Differential Revision: https://reviews.llvm.org/D114580
In most common cases the @llvm.get.active.lane.mask intrinsic maps directly
to the SVE whilelo instruction, which already takes overflow into account.
However, currently in SelectionDAGBuilder::visitIntrinsicCall we always lower
this immediately to a generic sequence of instructions that explicitly
take overflow into account. This makes it very difficult to then later
transform back into a single whilelo instruction. Therefore, this patch
introduces a new TLI function called shouldExpandGetActiveLaneMask that asks if
we should lower/expand this to a sequence of generic ISD nodes, or instead
just leave it as an intrinsic for the target to lower.
You can see the significant improvement in code quality for some of the
tests in this file:
CodeGen/AArch64/active_lane_mask.ll
Differential Revision: https://reviews.llvm.org/D114542
No functional changes intended.
Before this patch DwarfCompileUnit::createScopeChildrenDIE() and
DwarfCompileUnit::createAndAddScopeChildrenDIE() used to emit child subtrees
and then when all the children get created, attach them to a parent scope DIE.
However, when a DIE doesn't have a parent, all the requests for its unit DIE
fail.
Currently, this is not a big issue since it isn't usually needed to know unit DIE
for a local (function-scoped) entity. But once we introduce lexical blocks as
a valid scope for global variables (static locals) and type DIEs, any requests
for a unit DIE need to be guarded against local scope due to the potential
absence of the DIE's parent.
To avoid the aforementioned issue, this patch refactors a few DwarfCompileUnit
methods to support the idea of attaching a DIE to its parent as close to the
creation of this DIE as possible.
Reviewed By: ellis
Differential Revision: https://reviews.llvm.org/D114350
This change folds a basic funnel shift idiom:
- (or (shl x, amt), (lshr y, sub(bw, amt))) -> fshl(x, y, amt)
- (or (shl x, sub(bw, amt)), (lshr y, amt)) -> fshr(x, y, amt)
This also helps in folding to rotate shift if x and y are equal since we
already have a funnel shift to rotate combine.
Differential Revision: https://reviews.llvm.org/D114499
Currently the generic lowering of llvm.get.active.lane.mask is done
in SelectionDAGBuilder::visitIntrinsicCall and currently assumes
only fixed-width vectors are used. This patch changes the code to be
more generic and support scalable vectors too. I have added tests
for SVE here:
CodeGen/AArch64/active_lane_mask.ll
although the code quality leaves a lot to be desired. The code will
be improved significantly in a later patch that makes use of the
SVE whilelo instruction.
Differential Revision: https://reviews.llvm.org/D114541
In some scenarios, usually involving NRVO, we can issue indirect DBG_VALUEs
after SelectionDAG, even in instruction referencing mode (if the variable
is an argument). If the corresponding argument value is spilt to the stack,
then we have:
* Indirection from it being on the stack,
* Indirection from it being a dbg.declare or a dbg.addr.
However InstrRefBasedLDV only emits one level of indirection. This patch
adds the second, by adding an extra DW_OP_deref if necessary. The two
tests modified fail otherwise -- they feature some NRVO, and require two
levels of indirection to be correct.
Differential Revision: https://reviews.llvm.org/D114364
This is a performance patch -- LiveDebugVariables can behave quadratically
if a lot of debug instructions are inserted back into the same place, and
we have to repeatedly step-over hte ones we've already inserted.
To get around it, whenever we insert a debug instruction at a slot index,
check whether there are more debug instructions to insert at this point,
and insert them too. That avoids the repeated lookup and stepping through.
It relies on the container for unlinked debug instructions being recorded
in-order, which is how LiveDebugVariables currently does it.
Differential Revision: https://reviews.llvm.org/D114587
DBG_INSTR_REF's and DBG_VALUE's can end up in blocks that aren't in the
lexical scope of their variable. It's arguable as to what we should do
about this, however VarLocBasedLDV permits such variable locations to be
propagated, so let's allow it in InstrRefBasedLDV.
It's necessary for the modified test to work.
Differential Revision: https://reviews.llvm.org/D114578
If we only demand bits from one half of a rotation pattern, see if we can simplify to a logical shift.
For the ARM/AArch64 rev16/32 patterns, I had to drop a fold to prevent srl(bswap()) -> rotr(bswap) -> srl(bswap) infinite loops. I've replaced this with an isel PatFrag which should do the same task.
Reapplied with fix for AArch64 rev patterns to matching the ARM fix.
https://alive2.llvm.org/ce/z/iroxki (rol -> shl by amt iff demanded bits has at least as many trailing zeros as the shift amount)
https://alive2.llvm.org/ce/z/4ez_U- (ror -> shl by revamt iff demanded bits has at least as many trailing zeros as the reverse shift amount)
https://alive2.llvm.org/ce/z/cD7dR- (ror -> lshr by amt iff demanded bits has at least as many leading zeros as the shift amount)
https://alive2.llvm.org/ce/z/_XGHtQ (rol -> lshr by revamt iff demanded bits has at least as many leading zeros as the reverse shift amount)
Differential Revision: https://reviews.llvm.org/D114354
The changes in D113888 / 32b6c17b29 altered the memory size of a
masked store, as it will store an unknown number of bytes not the full
vector size. We can have situations where the masked stores is legalized
and then turned to a normal store, as the mask is known to be all ones.
This creates a store with an unknown size MMO that was hitting this
assert.
The store created can be given a better size in a followup patch. This
currently adjusts the assert to handle unknown sizes.
Almost all of the time, call instructions don't actually lead to SP being
different after they return. An exception is win32's _chkstk, which which
implements stack probes. We need to recognise that as modifying SP, so
that copies of the value are tracked as distinct vla pointers.
This patch adds a target frame-lowering hook to see whether stack probe
functions will modify the stack pointer, store that in an internal flag,
and if it's true then scan CALL instructions to see whether they're a
stack probe. If they are, recognise them as defining a new stack-pointer
value.
The added test exercises this behaviour: two calls to _chkstk should be
considered as producing two different values.
Differential Revision: https://reviews.llvm.org/D114443
Avoid un-necessarily recreating DBG_VALUEs on call instructions.
In LiveDebugvalues we choose to ignore any clobbers of SP by call
instructions, as they're irrelevant to our model of the machine. We
currently do so for tracking register values (MTracker); do the same for
tracking variable locations (TTracker).
Test modified to endure that a duplicate DBG_VALUE is not created after the
call in struction in this test.
Differential Revision: https://reviews.llvm.org/D114365
If we only demand bits from one half of a rotation pattern, see if we can simplify to a logical shift.
For the ARM rev16 patterns, I had to drop a fold to prevent srl(bswap()) -> rotr(bswap) -> srl(bswap) infinite loops. I've replaced this with an isel PatFrag which should do the same task.
https://alive2.llvm.org/ce/z/iroxki (rol -> shl by amt iff demanded bits has at least as many trailing zeros as the shift amount)
https://alive2.llvm.org/ce/z/4ez_U- (ror -> shl by revamt iff demanded bits has at least as many trailing zeros as the reverse shift amount)
https://alive2.llvm.org/ce/z/cD7dR- (ror -> lshr by amt iff demanded bits has at least as many leading zeros as the shift amount)
https://alive2.llvm.org/ce/z/_XGHtQ (rol -> lshr by revamt iff demanded bits has at least as many leading zeros as the reverse shift amount)
Differential Revision: https://reviews.llvm.org/D114354
In quite a few places we were calling getCurSDLoc() to get the debug
location, but this is already a local variable `sdl`.
Differential Revision: https://reviews.llvm.org/D114447
It appears that we can emit all the instructions for a function, including
debug instructions, and then optimise some of the values out late.
Specifically, in the attached test case, an argument gets optimised out
after DBG_VALUE / DBG_INSTR_REFs are created. This confuses
MachineFunction::finalizeDebugInstrRefs, which expects to be able to find a
defining instruction, and crashes instead.
Fix this by identifying when there's no defining instruction, and
translating that instead into a DBG_VALUE $noreg.
Differential Revision: https://reviews.llvm.org/D114476
AMDGPU is unusual in that the both stack is indexed in the same
direction as stack growth (up). We therefore always need the emergency
stack slots placed as low as possible to ensure they are in range of
load/store instruction immediate offsets. The existing logic is mostly
OK, but failed if we required stack realignment.
I don't understand what the existing control isFPCloseToIncomingSP is
supposed to mean, but can only be used to stop placing the scavenge
slots earlier. Make this explicit so that targets can opt-in rather
than opt-out only.
The MIR sample loader changes the branch probability but not BFI.
Here we force a recompute of BFI if the branch probabilities are
changed.
Also register the MIR FSAFDO passes properly.
Differential Revision: https://reviews.llvm.org/D114400
[NFC] As part of using inclusive language within the llvm project, this patch
replaces master with primary in `LiveRangeUtils.h`.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D114191
Usage and naming of macros in VPIntrinsics.def has been inconsistent. Rename all property macros to VP_PROPERTY_<name>. Use BEGIN/END scope macros to attach properties to vp intrinsics and SDNodes (instead of specifying either directly with the property macro).
A follow-up patch has documentation on how the macros are (intended) to be used.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D114144
A masked load or store will load a potentially unknown number of bytes
from a memory location - that is not generally known at compile time.
They do not necessarily load/store the entire vector width, and treating
them as such can lead to incorrect aliasing information (for example, if
the underlying object is smaller than the size of the vector).
This makes sure that the MMO is given an unknown size to represent this.
which is less accurate that "may load/store from up to 16 bytes", but
less incorrect that "will load/store from 16 bytes".
Differential Revision: https://reviews.llvm.org/D113888
This basically reverts 1778831a3d, which split them.
Since they were split 9 years ago, EmitGCCInlineAsmStr() grew a bunch of
features that usually weren't added to EmitMSInlineAsmStr(), and
that was usually a mistake. D71677, D113932, D114167 are all examples
of where things were backported to EmitMSInlineAsmStr().
The names were also not great. EmitMSInlineAsmStr() used to be called for `asm
inteldialect`, which clang produces for Microsoft-style __asm { ... } blocks as
well for GCC-style __asm__ / asm statements with -masm=intel. On the other hand,
EmitGCCInlineAsmStr() used to be called for `asm`, whic clang produces for
GCC-style __asm__ / asm statements with -masm=att (the default).
It's also less code (23 insertions, 188 deletions).
No behavior change.
Differential Revision: https://reviews.llvm.org/D114330
This makes a line in llvm/test/CodeGen/X86/asm-block-labels.ll pass
with `asm inteldialect` too.
I don't know if this is something one can hit in practice with inline
asm. The test is from 2007 (4646aa3e33) but in 2009 blockaddr was
introduced and e.g. `__asm__ __volatile__("brl %0" :: "X"(&&foo) : "memory");`
compiles to
call void asm sideeffect "brl $0", "X,..."(i8* blockaddress(@func, %1))
nowadays (thanks to jrtc27 for that example!).
(6c4d255bf3 switched clang to blockaddress on an opt-in basis,
e4801f7844 added docs for it, 31b132c0b7 added IR support.)
I half-heartedly tried to build clang 2.8 locally, but it didn't
just build. And 2.8 didn't have a prebuilt clang binary yet.
The motivation is to make EmitGCCInlineAsmStr() and EmitMSInlineAsmStr()
more alike, and maybe we should delete this code form EmitGCCInlineAsmStr()
instead. But since it's just 3 lines and it's reachable from LLVM IR,
let's do the safer thing for now.
Differential Revision: https://reviews.llvm.org/D114329
This makes the following program build with -masm=intel:
int foo(int count) {
asm goto ("dec %0; jb %l[stop]" : "+r" (count) : : : stop);
return count;
stop:
return 0;
}
It's also is another step towards merging EmitGCCInlineAsmStr() and
EmitMSInlineAsmStr().
Differential Revision: https://reviews.llvm.org/D114167
No intended behavior change.
EmitGCCInlineAsmStr() used to explicitly check for modifier 'l'
after handling block address and machine basic block operands.
This prevented passing a MachineOperand with 'l' modifier to
PrintAsmMemoryOperand(). Conceptually that seems kind of nice,
but in practice the overrides of PrintAsmMemoryOperand() in all (*)
AsmPrinter subclasses already reject modifiers they don't know about,
and none of them don't know about 'l'. So removing this doesn't have
a behavior difference, is less code, and it makes EmitGCCInlineAsmStr()
and EmitMSInlineAsmStr() more similar, to prepare for merging them later.
(Why not _add_ the branch to EmitMSInlineAsmStr() instead? Because that
always works with X86AsmPrinter I think, and
X86AsmPrinter::PrintAsmMemoryOperand() very decisively rejects the 'l'
modifier, so it's hard to motivate adding that branch.)
*: The one exception was AVRAsmPrinter, which had an llvm_unreachable instead
of returning true. So this commit changes that, so that the AVR target keeps
emitting an error instead of crashing when passing a mem operand with a :l
modifier to it. All the other targets already don't crash on this.
Differential Revision: https://reviews.llvm.org/D114216
Patch to fix some of the regressions in D77804.
By folding to rotate/funnel-shift by constant amounts for illegal types, we prevent SimplifyDemandedBits from destroying the patterns prematurely, allowing us to use the rotate/funnel-shift legalization that was added in D112443.
Differential Revision: https://reviews.llvm.org/D113192
Fixed the vector type issue that where we used getVectorNumElements()
should be replaced by getVectorElementCount() when lowering these
intrinsics.
This is similar to D94149
Signed-off-by: Eric Tang <tangxingxin1008@gmail.com>
Reviewed By: craig.topper, frasercrmck
Differential Revision: https://reviews.llvm.org/D109809
Don't expand CTTZ if CTPOP or CTLZ is supported on the promoted type.
We have special handling for CTTZ expansion to use those ops with a
small conversion. The setup for that doesn't generate extra code or
large constants so we don't gain anything from expanding early and we
make CTTZ_ZERO_UNDEF codegen worse.
Follow up from post commit feedback on D112268. We don't seem to have
any in tree tests that care about this.
This is preparation for D113707, where I want to make `-masm=intel`
emit `asm inteldialect` instructions.
`{movq %rbx, %rax|mov rax, rbx}` is supposed to evaluate to the bit
between { and | for att and to the bit between | and } for intel.
Since intel will become `asm inteldialect`, which alls EmitMSInlineAsmStr(),
EmitMSInlineAsmStr() has to support variants as well.
(clang translates `{...|...}` to `$(...$|...$)`. I'm not sure why
it doesn't just send along only the first `...` or the second `...`
to LLVM, but given the notes in PR23933 let's not do a big
reorganization in this codepath.)
Differential Revision: https://reviews.llvm.org/D113932
If we have a large enough floating point type that can exactly
represent the integer value, we can convert the value to FP and
use the exponent to calculate the leading/trailing zeros.
The exponent will contain log2 of the value plus the exponent bias.
We can then remove the bias and convert from log2 to leading/trailing
zeros.
This doesn't work for zero since the exponent of zero is zero so we
can only do this for CTLZ_ZERO_UNDEF/CTTZ_ZERO_UNDEF. If we need
a value for zero we can use a vmseq and a vmerge to handle it.
We need to be careful to make sure the floating point type is legal.
If it isn't we'll continue using the integer expansion. We could split the vector
and concatenate the results but that needs some additional work and evaluation.
Differential Revision: https://reviews.llvm.org/D111904
`asm` always has AT&T-style input (`asm inteldialect` has Intel-style asm
input), so EmitGCCInlineAsmStr() always has to pick the same variant since it
cares about the input asm string, not the output asm string.
For PowerPC, that default variant is 1. For other targets, it's 0.
Without this, the included test case errors out with
error: unknown use of instruction mnemonic without a size suffix
mov rax, rbx
since it picks the intel branch and then tries to interpret it as AT&T
when selecting intel-style output with `-x86-asm-syntax=intel`.
Differential Revision: https://reviews.llvm.org/D113894
If possible fold fneg into instruction above if users cannot fold mods and we
know it will decrease instruction count.
Follows same logic as SDAG combiner in choosing opportunities to combine.
Differential Revision: https://reviews.llvm.org/D112827
When getTypeConversion returns TypeScalarizeScalableVector we were
sometimes returning a non-simple type from getTypeLegalizationCost.
However, many callers depend upon this being a simple type and will
crash if not. This patch changes getTypeLegalizationCost to ensure
that we always a return sensible simple VT. If the vector type
contains unusual integer types, e.g. <vscale x 2 x i3>, then we just
set the type to MVT::i64 as a reasonable default.
A test has been added here that demonstrates the vectoriser can
correctly calculate the cost of vectorising a "zext i3 to i64"
instruction with a VF=vscale x 1:
Transforms/LoopVectorize/AArch64/sve-inductions-unusual-types.ll
Differential Revision: https://reviews.llvm.org/D113777
If we've only demanded the 0'th element, and it comes from a (one-use) AND, try to convert the zero_extend_vector_inreg into a mask and constant fold it with the AND.
Delegate updating of LiveIntervals to each target's
convertToThreeAddress implementation, instead of repairing LiveIntervals
after the fact in TwoAddressInstruction::convertInstTo3Addr.
Differential Revision: https://reviews.llvm.org/D113493
This change make WidenVecRes_SELECT work for scalable vectors.
This patch is split from [D110319](https://reviews.llvm.org/D110319)
Signed-off-by: Eric Tang <tangxingxin1008@gmail.com>
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D110388
Instead of popping them and then immediately throwing them away, we can
just filter out globals and items in different scopes before adding them
to WorkList. Shouldn't change anything but keep the queue smaller.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D113864
It was being used occasionally already, and using it on the constructor
and getDbgEntityID has obvious type safety benefits.
Also use llvm_unreachable in the switch as usual, but since only these
two values are used in constructor calls I think it's still NFC.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D113862
This is a first attempt at a constant value consecutive store merging pass,
a counterpart to the DAGCombiner's store merging optimization.
The high level goals of this pass:
* Have a simple and efficient algorithm. As close to linear time as we can get.
Thus, prioritizing scalability of the algorithm over merging every corner case
we can find. The DAGCombiner's store merging code has been the source of
compile time and complexity issues in the past and I wanted to avoid that.
* Don't introduce any new data structures for ordering memory operations. In MIR,
we don't have the concept of chains like we do in the DAG, and the instruction
order is stricter than enforcing ordering with graph edges. Although I
considered adding something similar, I couldn't justify the overhead.
The pass is current split into 3 main parts. The main store merging code focuses
on identifying candidate stores and managing the candidate group that's under
consideration for merging. Analyzing addressing of stores is a potentially
complex part and for now there's just a basic implementation to identify easy
cases. Finally, the other main bit of complexity is the alias analysis, which
tries to follow the same logic as the DAG's AA.
Currently this implementation only supports merging of constant stores. Stores
of arbitrary variables are technically possible with a very small change, but
the DAG chooses not to do this. Doing so here makes most code worse since
there's extra overhead in merging values into wider registers.
On AArch64 -Os, this optimization results in very minor savings on CTMark.
Differential Revision: https://reviews.llvm.org/D109131
Fixes PR#48678. `X86TargetLowering::getRegForInlineAsmConstraint()` can adjust the register class to match the type, e.g. change `VR128X` to `VR256X` if the type needs 256 bits. However, the function currently returns the unadjusted register and the adjusted register class, e.g. `xmm15` and `VR256X`, which then causes an assertion failure later because the register class does not contain that register. This patch fixes this behavior.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D113834
It's possible that the mask is already a NOT. At least if InstCombine
hasn't canonicalized the input. In that case we will form an ANDN with
X instead of with Y. So we don't need to worry about Y being a constant.
We might need to check that X isn't a constant instead, but we don't
have a test case for that yet.
This fixes a size regression found when trying to enable this combine
for RISCV in D113937.
Differential Revision: https://reviews.llvm.org/D113948
https://reviews.llvm.org/D71677 copied a bunch of code from
EmitGCCInlineAsmStr() to EmitMSInlineAsmStr() but made a few small
(likely unintentional) changes. This makes these pieces look the same.
No behavior change.
(Why are these functions two copies? No great reason as far as I can tell.
https://reviews.llvm.org/rG1778831a3d1d24ab6545635f63da4d9c5f8f0ac7 did the
split; we might want to undo them at some point. But PR23933 suggests
that a bigger change is planned for this file in the future, so keeping
this incremental for now.)
Differential Revision: https://reviews.llvm.org/D113924
There's really no reason why anyone should use these special names in a variant.
I noticed this while reading the code: all other writes to OS are guarded by
this conditional, and the behavior with the check seems more correct, so
let's add the check.
Differential Revision: https://reviews.llvm.org/D113909
MachineVerifier verified the subranges of a live interval if
they existed, but did not complain if they did not exist.
This patch changes the verifier to complain if there are no
subranges in the live interval for a subreg operand (so long
as MachineRegisterInfo says we should be tracking subreg
liveness for that register). This matches the conditions for
LiveIntervalCalc to create subranges in the first place.
Differential Revision: https://reviews.llvm.org/D112556
In a LTO build, the `end_sequence` in debug_line table for each compile unit (CU) points the end of text section which merged all CUs. The `end_sequence` needs to point to the end of each CU's range. This bug often causes invalid `debug_line` table in the final `.dSYM` binary for MachO after running `dsymutil` which tries to compensate an out-of-range address of `end_sequence`.
The fix is to sync the line table termination with the range operations that are already maintained in DwarfDebug. When CU or section changes, or nodebug functions appear or module is finished, the prior pending line table is terminated using the last range label. In the MC path where no range is tracked, the old logic is conservatively used to end the line table using the section end symbol.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D108261
ProfileCount could model invalid values, but a user had no indication
that the getCount method could return bogus data. Optional<ProfileCount>
addresses that, because the user must dereference the optional. In
addition, the patch removes concept duplication.
Differential Revision: https://reviews.llvm.org/D113839
This was noted as a follow-up to D113212 / D113426:
4fc1fc40057e30404c3b11522cfcadhttps://alive2.llvm.org/ce/z/e4o96b
The canonicalization rules for these IR patterns are complicated,
and we were not matching the expected forms in 2 out of the 3
cases. We can make codegen more robust by matching the swapped
forms (and that will also work if these patterns are created late).
This modifies the preconditions of TypePromotion's isSafeWrap
method, to allow it to work from all constants from the ICmp.
Using the code:
%a = add %x, C1
%c = icmp ult %a, C2
According to Alive, we can prove that is equivalent to
icmp ult (add zext(%x), sext(C1)), zext(C2) given
C1 <=s 0 and C1 >s C2.
https://alive2.llvm.org/ce/z/CECYZB
Which is similar to what is already present. We can also
prove icmp ult (add zext(%x), sext(C1)), sext(C2) given
C1 <=s 0 and C1 <=s C2.
https://alive2.llvm.org/ce/z/KKgyeL
The PrepareWrappingAdds method was removed, and the
constants are now altered to sext or zext directly as
required by the above methods.
Differential Revision: https://reviews.llvm.org/D113678
For global variables and common blocks there is no way to create entities
through getOrCreateContextDIE(), so no need to obtain the context first.
Differential Revision: https://reviews.llvm.org/D113651
Register uses that are MRI->isConstantPhysReg() should not inhibit
sinking transformation.
Reviewed By: StephenTozer
Differential Revision: https://reviews.llvm.org/D111531
(Cond0 s> -1) ? N1 : 0 --> ~(Cond0 s>> BW-1) & N1
https://alive2.llvm.org/ce/z/mGCBrd
This was suggested as a potential enhancement in D113212 (also 7e30404c3b ).
There's an improvement for AArch that could be generalized ( X > -1 --> X >= 0 ).
For x86, we have a counter-acting fold for most cases that turns the shift+not
back into a setcc, so that needs a work-around to get more cases to use "pandn":
D113603
Note that this pattern (and a previous one) are not currently canonical forms
in IR:
https://alive2.llvm.org/ce/z/e4o96b
Adding swapped variants is left as a TODO item here, but is planned as
a near-term follow-up patch.
Differential Revision: https://reviews.llvm.org/D113426
When printing a LiveInterval, tweak the use of single and double spaces
to try to make it clearer that the valnos are associated with the
preceding range or subrange, not the following subrange.
Compare the output before and then after this patch:
%1 [32r,144r:0) 0@32r L000000000000000C [32r,144r:0) 0@32r L00000000000000F3 [32r,32d:0) 0@32r weight:0.000000e+00
%1 [32r,144r:0) 0@32r L000000000000000C [32r,144r:0) 0@32r L00000000000000F3 [32r,32d:0) 0@32r weight:0.000000e+00
Differential Revision: https://reviews.llvm.org/D113671
In TwoAddressInstructionPass::processTiedPairs when updating live
intervals after moving the last use of RegB back to the newly inserted
copy, update any affected subranges as well as the main range.
Differential Revision: https://reviews.llvm.org/D110411
Enable FoldConstantArithmetic to constant fold bitcasted constant build vectors. These have typically been bitcasted for type legalization purposes.
By extracting the raw constant bit data, performing the constant fold, and then casting the constant bit data back to the (legalized) type, we can perform constant folding on integer types after legalization.
This in particular helps 32-bit targets which need to handle vXi64 build vectors - during legalization the (unsupported) i64 elements are split to create a bitcasted v2Xi32 build vector.
Addresses some regressions in D113192.
Differential Revision: https://reviews.llvm.org/D113564
At least I think that's what the 32 here is. Use RegisterBitWidth
instead.
While there replace zext with zextOrSelf to simplify the code.
Reviewed By: samparker, dmgreen
Differential Revision: https://reviews.llvm.org/D113495
The introduction of this legalization, D111248, forgot to replace the
old chain with the new. This could manifest itself in the old
(illegally-typed) value remaining in the DAG, though the simple test
cases didn't catch this.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D113561
NFC refactor of D113351, pulling out the APInt split/merge code from the BuildVectorSDNode bits extraction into a BuildVectorSDNode::recastRawBits helper. This is to allow us to reuse the code when we're packing constant folded APInt data back together.
This patch fixes a compiler crash when widening scalable-vector loads
and stores which end up breaking down to element-wise store operations.
It does so by providing a way for targets with support for
vector-predicated loads and stores to use those instead. By widening the
operation but maintaining the original effective operation length via
the EVL, only the intended vector elements are loaded or stored.
This method should in theory be possible and even preferred for
fixed-length vector types, but all fixed-length types can be broken down
into their elements, and regardless I have observed regressions in the
generated code when doing so. I believe this is simply due to
VP_LOAD/VP_STORE not being up to par with LOAD/STORE in terms of
optimization. It does improve performance on smaller self-contained
examples, however, so the potential is there.
While the only target that benefits from this is RISCV, the legalization
is generic and so was placed centrally.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D111248
The existing code didn't add all necessary successors, which resulted in
disjoint basic blocks. These would end up not being legalized which, in the
best case, caused a fallback only in assert builds.
Here's an example:
https://godbolt.org/z/ndx15Enfj
We also end up getting weird codegen here as well.
Refactoring the code here allows us to correctly attach all successors. With
this patch, the above example gives correct codegen at -O0 with and without
asserts.
Also autogen the testcase to show that we add all the successors now.
Differential Revision: https://reviews.llvm.org/D113437
zhongyunde