We call tail-call-elim near the beginning of the pipeline,
but that is too early to annotate calls that get added later.
In the motivating case from issue #47852, the missing 'tail'
on memset leads to sub-optimal codegen.
I experimented with removing the early instance of
tail-call-elim instead of just adding another pass, but that
appears to be slightly worse for compile-time:
+0.15% vs. +0.08% time.
"tailcall" shows adding the pass; "tailcall2" shows moving
the pass to later, then adding the original early pass back
(so 1596886802 is functionally equivalent to 180b0439dc ):
https://llvm-compile-time-tracker.com/index.php?config=NewPM-O3&stat=instructions&remote=rotateright
Note that there was an effort to split the tail call functionality
into 2 passes - that could help reduce compile-time if we find
that this change costs more in compile-time than expected based
on the preliminary testing:
D60031
Differential Revision: https://reviews.llvm.org/D130374
This is helpful for debugging issues with very large functions or SCC.
Also helpful when function names are very large and it's hard to tell the number of nodes in an SCC.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D128003
This patch turns on the flag `-enable-no-rerun-simplification-pipeline`, which means the simplification pipeline will not be rerun on unchanged functions in the CGSCCPass Manager.
Compile time improvement:
https://llvm-compile-time-tracker.com/compare.php?from=17457be1c393ff691cca032b04ea1698fedf0301&to=882301ebb893c8ef9f09fe1ea871f7995426fa07&stat=instructions
No meaningful run time regressions observed in the llvm test suite and
in additional internal workloads at this time.
The example test in `test/Other/no-rerun-function-simplification-pipeline.ll` is a good means to understand the effect of this change:
```
define void @f1(void()* %p) alwaysinline {
call void %p()
ret void
}
define void @f2() #0 {
call void @f1(void()* @f2)
call void @f3()
ret void
}
define void @f3() #0 {
call void @f2()
ret void
}
```
There are two SCCs formed by the ModuleToPostOrderCGSCCAdaptor: (f1) and (f2, f3).
The pass manager runs on the first SCC, leading to running the simplification pipeline (function and loop passes) on f1. With the flag on, after this, the output will have `Running analysis: ShouldNotRunFunctionPassesAnalysis on f1`.
Next, the pass manager runs on the second SCC: (f2, f3). Since f1() was inlined, f2() now calls itself, and also calls f3(), while f3() only calls f2().
So the pass manager for the SCC first runs the Inliner on (f2, f3), then the simplification pipeline on f2.
With the flag on, the output will have `Running analysis: ShouldNotRunFunctionPassesAnalysis on f2`; unless the inliner makes a change, this analysis remains preserved which means there's no reason to rerun the simplification pipeline. With the flag off, there is a second run of the simplification pipeline run on f2.
Next, the same flow occurs for f3. The simplification pipeline is run on f3 a single time with the flag on, along with `ShouldNotRunFunctionPassesAnalysis on f3`, and twice with the flag off.
The reruns occur only on f2 and f3 due to the additional ref edges.
(Reapply after revert in e9ce1a5880 due to
Fuchsia test failures. Removed changes in lib/ExecutionEngine/ other
than error categories, to be checked in more detail and reapplied
separately.)
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
The CGProfilePass needs to be run during FullLTO compilation at link
time to emit the .llvm.call-graph-profile section to the compiled LTO
object file. Currently, it is being run only during the initial
LTO-prelink compilation stage (to produce the bitcode files to be
consumed by the linker) and so the section is not produced.
ThinLTO is not affected because:
- For ThinLTO-prelink compilation the CGProfilePass pass is not run
because ThinLTO-prelink passes are added via
buildThinLTOPreLinkDefaultPipeline. Normal and FullLTO-prelink
passes are both added via buildPerModuleDefaultPipeline which uses
the LTOPreLink parameter to customize its behavior for the
FullLTO-prelink pass differences.
- ThinLTO backend compilation phase adds the CGProfilePass (see:
buildModuleOptimizationPipeline).
Adjust when the pass is run so that the .llvm.call-graph-profile
section is produced correctly for FullLTO.
Fixes#56185 (https://github.com/llvm/llvm-project/issues/56185)
Enabling the verifiers is not very helpful if their output is
suppressed beyond the fatal error.
Differential Revision: https://reviews.llvm.org/D128743
Now that we have the sanitizer metadata that is actually on the global
variable, and now that we use debuginfo in order to do symbolization of
globals, we can delete the 'llvm.asan.globals' IR synthesis.
This patch deletes the 'location' part of the __asan_global that's
embedded in the binary as well, because it's unnecessary. This saves
about ~1.7% of the optimised non-debug with-asserts clang binary.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D127911
Symmetric transfer is not a part of C++ standards. So the vendors is not
forced to implement it any way. Given the symmetric transfer nowadays is
an optimization. It makes more sense to enable it only if the
optimization is enabled. It is also helpful for the compilation speed in
O0.
Previously if the inliner split an SCC such that an empty one remained, the MLInlineAdvisor could potentially lose track of the EdgeCount if a subsequent CGSCC pass modified the calls of a function that was initially in the SCC pre-split. Saving the seen nodes in onPassEntry resolves this.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D127693
Some cl::ZeroOrMore were added to avoid the `may only occur zero or one times!`
error. More were added due to cargo cult. Since the error has been removed,
cl::ZeroOrMore is unneeded.
Also remove cl::init(false) while touching the lines.
All callers pass true.
select-unfold-freeze.ll is now a subset of select.ll so delete it.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D126501
A new hidden option -print-on-crash that prints the IR as it was upon entering
the last pass when there is a crash.
The IR is saved in its print form before each pass is started and a
signal handler is registered. If the compilation crashes, the signal
handler will print the saved IR to dbgs(). This option
can be modified using -print-module-scope to get the IR for the complete
module. Note that this option only works with the new pass manager.
Reviewed By: yrouban
Differential Revision: https://reviews.llvm.org/D86657
In D123677, @YangKeao provided an implementation of `DOTGraphTraits{Viewer,Printer}` in the new pass manager. This commit migrates the `DomPrinter` and `DomViewer` to the new pass manager.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D124904
The EnableReuseStorageInFrame option is designed for testing only.
But it is better to use *_PASS_WITH_PARAMS macro to keep consistent with
other passes.
CoroCleanup is designed to lowering all the remaining coroutine
intrinsics. It is required to run after CoroSplit only. However, the
position of CoroCleanup now is far too late. The downside here is that
the unlowered coroutine instrincs might blocking other optimizations
too. So it should be a pure win to hoist the position of CoroCleanup.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D124360
This change could reduce the time we call `declaresCoroEarlyIntrinsics`.
And it is helpful for future changes.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D123925
VectorizerStart extension is module callback in old PM, but is function
callback in new PM. We lack a module extension point between end of
buildModuleSimplificationPipeline and the function optimization
(including vectorizer) pipeline. So this patch adds a new module
extension point before the function optimization pipeline.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D122296
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121736
CoroSplit lowers various coroutine intrinsics. It's a CGSCC pass and
CGSCC passes don't run on unreachable functions. Normally GlobalDCE will
come along and delete unreachable functions, but we don't run GlobalDCE
under -O0, so an unreachable function with coroutine intrinsics may
never have CoroSplit run on it.
This patch adds GlobalDCE when coroutines intrinsics are present. It
also now runs all coroutine passes conditional when coroutine intrinsics
are present. This should also solve the -O0 regression reported in
D105877 due to LazyCallGraph construction.
Fixes https://github.com/llvm/llvm-project/issues/54117
Reviewed By: ChuanqiXu
Differential Revision: https://reviews.llvm.org/D122275
This adds a new option to control AllowSpeculation added in D119965 when
using `-passes=...`.
This allows reproducing #54023 using opt.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D121944
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121736
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121327
RequireAnalysis<GlobalsAA> doesn't actually recompute GlobalsAA.
GlobalsAA isn't invalidated (unless specifically invalidated) because
it's self-updating via ValueHandles, but can be imprecise during the
self-updates.
Rather than invalidating GlobalsAA, which would invalidate AAManager and
any analyses that use AAManager, create a new pass that recomputes
GlobalsAA.
Fixes#53131.
Differential Revision: https://reviews.llvm.org/D121167
This patch adds PrettyStackEntries before running passes. The entries
include the pass name and the IR unit the pass runs on.
The information is used the print additional information when a pass
crashes, including the name and a reference to the IR unit on which it
crashed. This is similar to the behavior of the legacy pass manager.
The improved stack trace now includes:
Stack dump:
0. Program arguments: bin/opt -loop-vectorize -force-vector-width=4 crash.ll
1. Running pass 'ModuleToFunctionPassAdaptor' on module 'crash.ll'
2. Running pass 'LoopVectorizePass' on function '@a'
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120993
This is a clean-up patch. The functional pass was rolled into the module pass in D112732.
Reviewed By: vitalybuka, aeubanks
Differential Revision: https://reviews.llvm.org/D120674
This PR adds two extension points to the default LTO pipeline in PassBuilder, one at the beginning and one at the end. These two extension points already existed in the old pass manager, the aim is to replicate the same functionality in the new one.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120491
LICM will speculatively hoist code outside of loops. This requires removing information, like alias analysis (https://github.com/llvm/llvm-project/issues/53794), range information (https://bugs.llvm.org/show_bug.cgi?id=50550), among others. Prior to https://reviews.llvm.org/D99249 , LICM would only be run after LoopRotate. Running Loop Rotate prior to LICM prevents a instruction hoist from being speculative, if it was conditionally executed by the iteration (as is commonly emitted by clang and other frontends). Adding the additional LICM pass first, however, forces all of these instructions to be considered speculative, even if they are not speculative after LoopRotate. This destroys information, resulting in performance losses for discarding this additional information.
This PR modifies LICM to accept a ``speculative'' parameter which allows LICM to be set to perform information-loss speculative hoists or not. Phase ordering is then modified to not perform the information-losing speculative hoists until after loop rotate is performed, preserving this additional information.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D119965
Sanjay Patel