This fixes an UBSan failure after 644a965c1e. When using
user-provided VFs/ICs (via the force-vector-width /
force-vector-interleave options) the scalar cost is zero, which would
cause divide-by-zero.
When forcing vectorization using the options, the cost of the runtime
checks should not block vectorization.
This patch replaces the tight hard cut-off for the number of runtime
checks with a more accurate cost-driven approach.
The new approach allows vectorization with a larger number of runtime
checks in general, but only executes the vector loop (and runtime checks) if
considered profitable at runtime. Profitable here means that the cost-model
indicates that the runtime check cost + vector loop cost < scalar loop cost.
To do that, LV computes the minimum trip count for which runtime check cost
+ vector-loop-cost < scalar loop cost.
Note that there is still a hard cut-off to avoid excessive compile-time/code-size
increases, but it is much larger than the original limit.
The performance impact on standard test-suites like SPEC2006/SPEC2006/MultiSource
is mostly neutral, but the new approach can give substantial gains in cases where
we failed to vectorize before due to the over-aggressive cut-offs.
On AArch64 with -O3, I didn't observe any regressions outside the noise level (<0.4%)
and there are the following execution time improvements. Both `IRSmk` and `srad` are relatively short running, but the changes are far above the noise level for them on my benchmark system.
```
CFP2006/447.dealII/447.dealII -1.9%
CINT2017rate/525.x264_r/525.x264_r -2.2%
ASC_Sequoia/IRSmk/IRSmk -9.2%
Rodinia/srad/srad -36.1%
```
`size` regressions on AArch64 with -O3 are
```
MultiSource/Applications/hbd/hbd 90256.00 106768.00 18.3%
MultiSourc...ks/ASCI_Purple/SMG2000/smg2000 240676.00 257268.00 6.9%
MultiSourc...enchmarks/mafft/pairlocalalign 472603.00 489131.00 3.5%
External/S...2017rate/525.x264_r/525.x264_r 613831.00 630343.00 2.7%
External/S...NT2006/464.h264ref/464.h264ref 818920.00 835448.00 2.0%
External/S...te/538.imagick_r/538.imagick_r 1994730.00 2027754.00 1.7%
MultiSourc...nchmarks/tramp3d-v4/tramp3d-v4 1236471.00 1253015.00 1.3%
MultiSource/Applications/oggenc/oggenc 2108147.00 2124675.00 0.8%
External/S.../CFP2006/447.dealII/447.dealII 4742999.00 4759559.00 0.3%
External/S...rate/510.parest_r/510.parest_r 14206377.00 14239433.00 0.2%
```
Reviewed By: lebedev.ri, ebrevnov, dmgreen
Differential Revision: https://reviews.llvm.org/D109368
This patch slightly extends the limit on the RecursionMaxDepth inside
the SLP vectorizer. It does it only when it hits a load (or zext/sext of
a load), which allows it to peek through in the places where it will be
the most valuable, without ballooning out the O(..) by any 2^n factors.
Differential Revision: https://reviews.llvm.org/D122148
Use ConstantFoldBinaryOpOperands() instead, to handle the case
where not all binary ops have a constant expression variant.
This is a bit awkward because we only want to pop the element from
Ops once we're sure that it has folded.
This in an extension to the code added in D123911 which added vector
combine folding of shuffle-select patterns, attempting to reduce the
total amount of shuffling required in patterns like:
%x = shuffle %i1, %i2
%y = shuffle %i1, %i2
%a = binop %x, %y
%b = binop %x, %y
shuffle %a, %b, selectmask
This patch extends the handing of shuffles that are dependent on one
another, which can arise from the SLP vectorizer, as-in:
%x = shuffle %i1, %i2
%y = shuffle %x
The input shuffles can also be emitted, in which case they are treated
like identity shuffles. This patch also attempts to calculate a better
ordering of input shuffles, which can help getting lower cost input
shuffles, pushing complex shuffles further down the tree.
Differential Revision: https://reviews.llvm.org/D128732
These conditions are later checked in the HoistTerminator code
path. Checking them here is somewhat confusing, because this code
only checks the first instruction in the block, which is not
necessarily the terminator.
(-(X & 1)) & Y --> (X & 1) == 0 ? 0 : Y
https://alive2.llvm.org/ce/z/rhpH3i
This is noted as a missing IR canonicalization in issue #55618.
We already managed to fix codegen to the expected form.
The moved helpers are only used for codegen. It will allow moving the
remaining ::execute implementations out of LoopVectorize.cpp.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D128657
If we are certainly not in a loop we can directly emit the heap2stack
allocas in the function entry block. This will help to get rid of them
(SROA) and avoid stacksave/restore intrinsics when the function is
inlined.
This transform is responsible for a long-standing miscompile
as discussed in issue #47012 (was bugzilla #47668).
There was a proposal to correct it in D88432, but that was
abandoned and there hasn't been any recent activity to fix
it AFAICT.
The original patch D45108 started with a constant-shift-only
restriction and only expanded during review, so I don't think
there's much risk of perf regression on the motivating code.
Add an emitter for the memrchr common extension and simplify the strrchr
call handler to use it. This enables transforming calls with the empty
string to the test C ? S : 0.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D128954
LoopSimplify only requires that the loop predecessor has a single
successor and is safe to hoist into -- it doesn't necessarily have
to be an unconditional BranchInst.
Adjust LoopDeletion to assert conditions closer to what it actually
needs for correctness, namely a single successor and a
side-effect-free terminator (as the terminator is getting dropped).
Fixes https://github.com/llvm/llvm-project/issues/56266.
At the moment, the same VPlan can be used code generation of both the
main vector and epilogue vector loop. This can lead to wrong results, if
the plan is optimized based on the VF of the main vector loop and then
re-used for the epilogue loop.
One example where this is problematic is if the scalar loops need to
execute at least one iteration, e.g. due to interleave groups.
To prevent mis-compiles in the short-term, disable optimizing exit
conditions for VPlans when using epilogue vectorization. The proper fix
is to avoid re-using the same plan for both loops, which will require
support for cloning plans first.
Fixes#56319.
When converting strchr(p, '\0') to p + strlen(p) we know that
strlen() must return an offset that is inbounds of the allocated
object (otherwise it would be UB), so we can use an inbounds GEP.
An equivalent argument can be made for the other cases.
The moved helpers are only used for codegen. It will allow moving the
remaining ::execute implementations out of LoopVectorize.cpp.
Depends on D127966.
Depends on D127965.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D127968
This is a minor refinement of resolvedUndefsIn(), mostly for clarity.
If the value of an instruction is undef, then that's already a legal
final result -- we can safely rauw such an instruction with undef.
We only need to mark unknown values as overdefined, as that's the
result we get for an instruction that has not been processed because
it has an undef operand.
Differential Revision: https://reviews.llvm.org/D128251
The unidentified objects recognized in `getUnderlyingObjects` may
still alias to the noalias parameter because `getUnderlyingObjects`
may not check deep enough to get the underlying object because of
`MaxLookup`. The real underlying object for the unidentified object
may still be the noalias parameter.
Originally Patched By: tingwang
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D127202
When merging GEP of GEP with constant indices, if the second GEP's offset is not divisible by the first GEP's element size, convert both type to i8* and merge.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D125934
I looked at canonicalizing in the other direction, but that causes
many potential regressions and infinite loops because we already
(possibly wrongly) canonicalize "trunc X to i1" into an and+icmp.
This has a data layout restriction to avoid creating illegal
mask instructions, but we could remove that if we can show
that the backend can undo this when needed.
The motivating example from issue #56119 is modeled by the
PhaseOrdering test.
Correct a logic bug in the memrchr enhancement added in D123629 that
makes it ineffective in a subset of cases.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D128856
Migrate all binops to use FoldXYZ rather than CreateXYZ APIs,
which are compatible with InstSimplifyFolder and fallible constant
folding.
Rather than continuing to add one method for every single operator,
add a generic FoldBinOp (plus variants for nowrap, exact and fmf
operators), which we would need anyway for CreateBinaryOp.
This change is not NFC because IRBuilder with InstSimplifyFolder
may perform more folding. However, this patch changes SCEVExpander
to not use the folder in InsertBinOp to minimize practical impact
and keep this change as close to NFC as possible.
This means we no longer need to have the same API between IRBuilder
and IRBuilderFolder.
The constant case is substantially simpler, so implementing it
separately isn't an undue burden.
Nowdays we have a generic constant folding API to load a type from
an offset. It should be able to do anything that VNCoercion can do.
This avoids the weird templating between IRBuilder and ConstantFolder
in one function, which is will stop working as the IRBuilderFolder
moves from CreateXYZ to FoldXYZ APIs.
Unfortunately, this doesn't eliminate this pattern from VNCoercion
entirely yet.
At the moment LoopVersioning is only created for inner-loop
vectorization. This patch moves it to LVP::execute, which means it will
also be added for epilogue vectorization. As a consequence, the proper
noalias metadata is now also added to epilogue vector loops.
LVer will be moved to VPTransformState as follow-up.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D127966
The assert was added with 0399473de8 and is correct for that
pattern, but it is off-by-1 with the enhancement in d4f39d8333.
The transforms are still correct with the new pre-condition:
https://alive2.llvm.org/ce/z/6_6ghmhttps://alive2.llvm.org/ce/z/_GTBUt
And as shown in the new test, the transform is expected with
'ult' - in that case, the icmp reduces to test if the shift
amount is 0.
For instructions that don't need any special handling, use
ConstantFoldInstOperands(), rather than re-implementing individual
cases.
This is probably not NFC because it can handle cases the previous
code missed (e.g. vector operations).
Support compares in ConstantFoldInstOperands(), instead of
forcing the use of ConstantFoldCompareInstOperands(). Also handle
insertvalue (extractvalue was already handled).
This removes a footgun, where many uses of ConstantFoldInstOperands()
need a separate check for compares beforehand. It's particularly
insidious if called on a constant expression, because it doesn't
fail in that case, but will just not do DL-dependent folding.
In some cases, there may be widened users of inductions even though the
plan includes the scalar VF. In those cases, make sure we still replace
the VPWidenIntOrFpInductionRecipe with scalar steps, as otherwise we may
try to execute a VPWidenIntOrFpInductionRecipe with a scalar VF.
Alternatively the patch could also split the range if needed.
This fixes a crash exposed by D123720.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D128755
Currently, we only remove dead blocks and non-feasible edges in
IPSCCP, but not in SCCP. I'm not aware of any strong reason for
that difference, so this patch updates SCCP to perform the CFG
cleanup as well.
Compile-time impact seems to be pretty minimal, in the 0.05%
geomean range on CTMark.
For the test case from https://reviews.llvm.org/D126962#3611579
the result after -sccp now looks like this:
define void @test(i1 %c) {
entry:
br i1 %c, label %unreachable, label %next
next:
unreachable
unreachable:
call void @bar()
unreachable
}
-jump-threading does nothing on this, but -simplifycfg will produce
the optimal result.
Differential Revision: https://reviews.llvm.org/D128796
enabled
The C++20 Coroutines couldn't be compiled to WebAssembly due to an
optimization named symmetric transfer requires the support for musttail
calls but WebAssembly doesn't support it yet.
This patch tries to fix the problem by adding a supportsTailCalls
method to TargetTransformImpl to skip the symmetric transfer when
tail-call feature is not supported.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D128794
ConnectProlog adds new incoming values to exit phi nodes which can
change the SCEV for the phi after 20d798bd47.
Fix is analog to cfc741bc0e.
Fixes#56286.
ConnectEpilog adds new incoming values to exit phi nodes which can
change the SCEV for the phi after 20d798bd47.
Fix is analog to cfc741bc0e.
Fixes#56282.
This code requires the result to be an UndefValue/ConstantInt
anyway (checked by getKnownConstant), so we are only interested
in the case where this folds.
AARGetter is an abstraction over a source of the `AAResults` introduced
to support the legacy pass manager as well as the modern one. Since the
Argument Promotion pass doesn't support the legacy pass manager anymore,
the abstraction is not required and `AAResults` may be used directly.
The instance of the `FunctionAnalysisManager` is passed through the
functions to get all the required analyses just wherever they are
required and do not use the awkward getter callbacks.
The `ReplaceCallSite` parameter was required for the legacy pass manager
only and isn't used anymore, so the parameter has been eliminated.
Differential Revision: https://reviews.llvm.org/D128727
The `isDenselyPacked` static member of the `ArgumentPromotionPass` class
is not used in the class itself anymore. The single known user of the
function is in the `AttributorAttributes.cpp` file, so the function has
been moved into the file.
Differential Revision: https://reviews.llvm.org/D128725
Extend the solution accepted in D127766 to strncmp and simplify
strncmp(A, B, N) calls with constant A and B and variable N to
the equivalent of
N <= Pos ? 0 : (A < B ? -1 : B < A ? +1 : 0)
where Pos is the offset of either the first mismatch between A
and B or the terminating null character if both A and B are equal
strings.
Reviewed By: courbet
Differential Revision: https://reviews.llvm.org/D128089
Enhance getConstantDataArrayInfo to let the memchr and memcmp library
call folders look through arbitrarily long sequences of bitcast and
GEP instructions.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D128364
If the root order itself does not require reordering, we can just
remove its reorder mask safely (e.g., if the root node is a vector of
phis). But if this node is used as an operand in the graph, we cannot
delete the reordering, need to keep it. Otherwise the graph nodes are
not synchronized with the operands. It may cause an extra gather
instruction(s) or a compiler crash.
Also, need to be very careful when selecting the gather nodes for
reordering since there might several gather nodes with the same scalars
and we can try to reorder just the same node many times instead of
different nodes.
Differential Revision: https://reviews.llvm.org/D128680
This moves some code for getting PC and SP into their own functions. Since SP
is also retrieved in the prologue and getting the stack tag, we can cache the
SP if we get it once in the prologue. This caching will really only be relevant
in D128387 where StackBaseTag may not be set in the prologue if __hwasan_tls
is not used.
Differential Revision: https://reviews.llvm.org/D128551
It makes sense to handle byval promotion in the same way as non-byval
but also allowing `store` instructions. However, these should
use the same checks as the `load` instructions do, i.e. be part of the
`ArgsToPromote` collection. For these instructions, the check for
interfering modifications can be disabled, though. The promotion
algorithm itself has been modified a lot: all the accesses (i.e. loads
and stores) are rewritten to the emitted `alloca` instructions. To
optimize these new `alloca`s out, the `PromoteMemToReg` function from
`Transforms/Utils/PromoteMemoryToRegister.cpp` file is invoked after
promotion.
In order to let the `PromoteMemToReg` promote as many `alloca`s as it
is possible, there should be no `GEP`s from the `alloca`s. To
eliminate the `GEP`s, its own `alloca` is generated for every argument
part because a single `alloca` for the whole argument (that
significantly simplifies the code of the pass though) unfortunately
cannot be used.
The idea comes from the following discussion:
https://reviews.llvm.org/D124514#3479676
Differential Revision: https://reviews.llvm.org/D125485
This patch moves the code for recipe implementations to a separate file.
The benefits are:
* Keep VPlan.cpp smaller => faster compile-time during parallel builds.
* Keep code for logical units together
As a follow-up I am also planning on moving all ::execute
implemetnations from LoopVectorize.cpp over to the new file, which
should help to reduce the size of the file a bit.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D127965
This removes the extractvalue constant expression, as part of
https://discourse.llvm.org/t/rfc-remove-most-constant-expressions/63179.
extractvalue is already not supported in bitcode, so we do not need
to worry about bitcode auto-upgrade.
Uses of ConstantExpr::getExtractValue() should be replaced with
IRBuilder::CreateExtractValue() (if the fact that the result is
constant is not important) or ConstantFoldExtractValueInstruction()
(if it is). Though for this particular case, it is also possible
and usually preferable to use getAggregateElement() instead.
The C API function LLVMConstExtractValue() is removed, as the
underlying constant expression no longer exists. Instead,
LLVMBuildExtractValue() should be used (which will constant fold
or create an instruction). Depending on the use-case,
LLVMGetAggregateElement() may also be used instead.
Differential Revision: https://reviews.llvm.org/D125795
`commonAlignment` is a shortcut to pick the smallest of two `Align`
objects. As-is it doesn't bring much value compared to `std::min`.
Differential Revision: https://reviews.llvm.org/D128345
This is the followup patch to https://reviews.llvm.org/D125246 for the `SampleContextTracker` part. Before the promotion and merging of the context is based on the SampleContext(the array of frame), this causes a lot of cost to the memory. This patch detaches the tracker from using the array ref instead to use the context trie itself. This can save a lot of memory usage and benefit both the compiler's CS inliner and llvm-profgen's pre-inliner.
One structure needs to be specially treated is the `FuncToCtxtProfiles`, this is used to get all the functionSamples for one function to do the merging and promoting. Before it search each functions' context and traverse the trie to get the node of the context. Now we don't have the context inside the profile, instead we directly use an auxiliary map `ProfileToNodeMap` for profile , it initialize to create the FunctionSamples to TrieNode relations and keep updating it during promoting and merging the node.
Moreover, I was expecting the results before and after remain the same, but I found that the order of FuncToCtxtProfiles matter and affect the results. This can happen on recursive context case, but the difference should be small. Now we don't have the context, so I just used a vector for the order, the result is still deterministic.
Measured on one huge size(12GB) profile from one of our internal service. The profile similarity difference is 99.999%, and the running time is improved by 3X(debug mode) and the memory is reduced from 170GB to 90GB.
Reviewed By: hoy, wenlei
Differential Revision: https://reviews.llvm.org/D127031
This is another attempt to land this patch.
The patch proposed to use a new cost model for loop interchange,
which is obtained from loop cache analysis.
Given a loopnest, what loop cache analysis returns is a vector of
loops [loop0, loop1, loop2, ...] where loop0 should be replaced as
the outermost loop, loop1 should be placed one more level inside, and
loop2 one more level inside, etc. What loop cache analysis does is not
only more comprehensive than the current cost model, it is also a "one-shot"
query which means that we only need to query it once during the entire
loop interchange pass, which is better than the current cost model where
we query it every time we check whether it is profitable to interchange
two loops. Thus complexity is reduced, especially after D120386 where we
do more interchanges to get the globally optimal loop access pattern.
Updates made to test cases are mostly minor changes and some
corrections. One change that applies to all tests is that we added an option
`-cache-line-size=64` to the RUN lines. This is ensure that loop
cache analysis receives a valid number of cache line size for correct
analysis. Test coverage for loop interchange is not reduced.
Currently we did not completely remove the legacy cost model, but
keep it as fall-back in case the new cost model did not run successfully.
This is because currently we have some limitations in delinearization, which
sometimes makes loop cache analysis bail out. The longer term goal is to
enhance delinearization and eventually remove the legacy cost model
compeletely.
Reviewed By: bmahjour, #loopoptwg
Differential Revision: https://reviews.llvm.org/D124926
Now that we have the sanitizer metadata that is actually on the global
variable, and now that we use debuginfo in order to do symbolization of
globals, we can delete the 'llvm.asan.globals' IR synthesis.
This patch deletes the 'location' part of the __asan_global that's
embedded in the binary as well, because it's unnecessary. This saves
about ~1.7% of the optimised non-debug with-asserts clang binary.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D127911
This change is a bit subtle. If we have a type like <vscale x 1 x i64>, the vectorizer will currently reject vectorization. The reason is that a type like <1 x i64> is likely to get simply rescalarized, and the vectorizer doesn't want to be in the game of simple unrolling.
(I've given the example in terms of 1 x types which use a single register, but the same issue exists for any N x types which use N registers. e.g. RISCV LMULs.)
This change distinguishes scalable types from fixed types under the reasoning that converting to a scalable type isn't unrolling. Because the actual vscale isn't known until runtime, using a vscale type is potentially very profitable.
This makes an important, but unchecked, assumption. Specifically, the scalable type is assumed to only be legal per the cost model if there's actually a scalable register class which is distinct from the scalar domain. This is, to my knowledge, true for all targets which return non-invalid costs for scalable vector ops today, but in theory, we could have a target decide to lower scalable to fixed length vector or even scalar registers. If that ever happens, we'd need to revisit this code.
In practice, this patch unblocks scalable vectorization for ELEN types on RISCV.
Let me sketch one alternate implementation I considered. We could have restricted this to when we know a minimum value for vscale. Specifically, for the default +v extension for RISCV, we actually know that vscale >= 2 for ELEN types. However, doing it this way means we can't generate scalable vectors when using the various embedded vector extensions which have a minimum vscale of 1.
Differential Revision: https://reviews.llvm.org/D128542
Information in the function `Prologue Data` is intentionally opaque.
When a function with `Prologue Data` is duplicated. The self (global
value) references inside `Prologue Data` is still pointing to the
original function. This may cause errors like `fatal error: error in backend: Cannot represent a difference across sections`.
This patch detaches the information from function `Prologue Data`
and attaches it to a function metadata node.
This and D116130 fix https://github.com/llvm/llvm-project/issues/49689.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D115844
Summary:
Currently in OpenMPOpt we strip `noinline` attributes from runtime
functions. This is here because the device bitcode library that we link
has problems with needed definitions getting prematurely optimized out.
This is only necessary for OpenMP offloading to GPUs so we should narrow
the scope for where we spend time doing this. In the future this
shouldn't be necessary as we move to using a linked library rather than
pulling in a bitcode library in Clang.
The global ctor evaluator currently handles by checking whether the
memset memory is already zero, and skips it in that case. However,
it only actually checks the first byte of the memory being set.
This patch extends the code to check all bytes being set. This is
done byte-by-byte to avoid converting undef values to zeros in
larger reads. However, the handling is still not completely correct,
because there might still be padding bytes (though probably this
doesn't matter much in practice, as I'd expect global variable
padding to be zero-initialized in practice).
Mostly fixes https://github.com/llvm/llvm-project/issues/55859.
Differential Revision: https://reviews.llvm.org/D128532
These intrinsics are now fundemental for SVE code generation and have been
present for a year and a half, hence move them out of the experimental
namespace.
Differential Revision: https://reviews.llvm.org/D127976
Support for the legacy pass manager in ArgPromotion causes
complications in D125485. As the legacy pass manager for middle-end
optimizations is unsupported, drop ArgPromotion from the legacy
pipeline, rather than introducing additional complexity to deal
with it.
Differential Revision: https://reviews.llvm.org/D128536
Globals that shouldn't be sanitized are currently communicated to HWASan
through the use of the llvm.asan.globals IR metadata. Now that we have
an on-GV attribute, use it.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D127543
Improved/fixed cost modeling for shuffles by providing masks, improved
cost model for non-identity insertelements.
Differential Revision: https://reviews.llvm.org/D115462
This patch updates LV to generate runtime after the VF & IC are selected. It
allows deciding whether to vectorize with runtime checks or not based on
their cost compared to the vector loop.
It also updates VectorizationFactor to include the scalar cost.
Reviewed By: lebedev.ri, dmgreen
Differential Revision: https://reviews.llvm.org/D75981
Drop the requirement that getInitialValueOfAllocation() must be
passed an allocator function, shifting the responsibility for
checking that into the function (which it does anyway). The
motivation is to avoid some calls to isAllocationFn(), which has
somewhat ill-defined semantics (given the number of
allocator-related attributes we have floating around...)
(For this function, all we eventually need is an allockind of
zeroed or uninitialized.)
Differential Revision: https://reviews.llvm.org/D127274
This is the second attempt to land this patch.
The patch proposed to use a new cost model for loop interchange,
which is obtained from loop cache analysis.
Given a loopnest, what loop cache analysis returns is a vector of
loops [loop0, loop1, loop2, ...] where loop0 should be replaced as the
outermost loop, loop1 should be placed one more level inside, and loop2
one more level inside, etc. What loop cache analysis does is not only more
comprehensive than the current cost model, it is also a "one-shot" query
which means that we only need to query it once during the entire loop
interchange pass, which is better than the current cost model where we
query it every time we check whether it is profitable to interchange two
loops. Thus complexity is reduced, especially after D120386 where we do
more interchanges to get the globally optimal loop access pattern.
Updates made to test cases are mostly minor changes and some corrections.
One change that applies to all tests is that we added an option
`-cache-line-size=64` to the RUN lines. This is ensure that loop cache
analysis receives a valid number of cache line size for correct analysis.
Test coverage for loop interchange is not reduced.
Currently we did not completely remove the legacy cost model, but keep it
as fall-back in case the new cost model did not run successfully. This is
because currently we have some limitations in delinearization, which sometimes
makes loop cache analysis bail out. The longer term goal is to enhance
delinearization and eventually remove the legacy cost model compeletely.
Reviewed By: bmahjour, #loopoptwg
Differential Revision: https://reviews.llvm.org/D124926
If we have an unaligned uniform store, then when costing a scalable VF we can't emit code to scalarize it. (Well, we could, but we haven't implemented that case.) This change replaces an assert with a cost-model bailout such that we reject vectorization with the scalable VF instead of crashing.
If the masked gather nodes must be reordered, we can just reorder
scalars, just like for gather nodes. But if the node contains reused
scalars, it must be handled same way as a regular vectorizable node,
since need to reorder reused mask, not the scalars directly.
Differential Revision: https://reviews.llvm.org/D128360
If there are multiple constraints in the same block, at the moment the
order they are processed may be different depending on the sort
implementation.
Use stable_sort to ensure consistent ordering.
This reverts commit cac60940b7.
Caused -Os -fsanitize=memory -march=haswell miscompile to pytorch/cpuinfo.
See my latest comment (may update) on D115462.
Finding BDV for vector value does not handle freeze instruction.
Adding its handling as it is done for scalar case.
Reviewed By: apilipenko
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D128254
The reachability queries default to "reachable" after exploring too many
basic blocks. LoopInfo helps it skip over the whole loop.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D127917
StructurizeCFG linearizes the successors of branching basic block
by adding Flow blocks to record the true/false path for branches
and back edges. This patch reduces the number of Phi values needed
to capture the control flow path by improving the basic block
ordering.
Previously, StructurizeCFG adds loop exit blocks outside of the
loop. StructurizeCFG sets a boolean value to indicate the path
taken, and all exit block live values extend to after the loop.
For loops with a large number of exits blocks, this creates a
huge number of values that are maintained, which increases
compilation time and register pressure. This is problem
especially with ASAN, which adds early exits to blocks with
unreachable instructions for each instrumented check in the loop.
In specific cases, this patch reduces the number of values needed
after the loop by moving the exit block into the loop. This is
done for blocks that have a single predecessor and single successor
by moving the block to appear just after the predecessor.
Differential Revision: https://reviews.llvm.org/D123231
UnifyLoopExits creates a single exit, a control flow hub, for
loops with multiple exits. There is an input to the block for
each loop exiting block and an output from the block for each
loop exit block. Multiple checks, or guard blocks, are needed
to branch to the correct exit block.
For large loops with lots of exit blocks, all the extra guard
blocks cause problems for StructurizeCFG and subsequent passes.
This patch reduces the number of guard blocks needed when the
exit blocks branch to a common block (e.g., an unreachable
block). The guard blocks are reduced by changing the inputs
and outputs of the control flow hub. The inputs are the exit
blocks and the outputs are the common block.
Reducing the guard blocks enables StructurizeCFG to reorder the
basic blocks in the CFG to reduce the values that exit a loop
with multiple exits. This reduces the compile-time of
StructurizeCFG and also reduces register pressure.
Differential Revision: https://reviews.llvm.org/D123230
We were overly conservative and required a ret statement to be dominated
completely be a single lifetime.end marker. This is quite restrictive
and leads to two problems:
* limits coverage of use-after-scope, as we degenerate to
use-after-return;
* increases stack usage in programs, as we have to remove all lifetime
markers if we degenerate to use-after-return, which prevents
reuse of stack slots by the stack coloring algorithm.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D127905
This was necessary for code reuse between the old and new passmanager.
With the old pass-manager gone, this is no longer necessary.
Reviewed By: eugenis, myhsu
Differential Revision: https://reviews.llvm.org/D127913
Binary size of `clang` is trivial; namely, numerical value doesn't
change when measured in MiB, and `.data` section increases from 139Ki to
173 Ki.
Differential Revision: https://reviews.llvm.org/D128070
Scale reg should never be zero, so when the quotient is zero, we
cannot assign it there. Limit this transform to avoid this situation.
Differential Revision: https://reviews.llvm.org/D128339
Reviewed By: eopXD
This patch adds a new transferToOtherSystem helper that tries to
transfer information from signed predicates to the unsigned system and
vice versa.
The initial version adds A >=u B for A >=s B && B >=s 0
https://alive2.llvm.org/ce/z/8b6F9i
As branch on undef is immediate undefined behavior, there is no need
to mark one of the edges as feasible. We can leave all the edges
non-feasible. In IPSCCP, we can replace the branch with an unreachable
terminator.
Differential Revision: https://reviews.llvm.org/D126962
The code has been reformatted in accordance with the code style. Some
function comments were extended to the Doxygen ones and reworded a bit
to eliminate the duplication of the function's/class' name in the
comment.
Differential Revision: https://reviews.llvm.org/D128168
NewGVN will find operator from other context. ValueTracking currently doesn't have a way to run completely without context instruction.
So it will use operator itself as conext instruction.
If the operator in another branch will never be executed but it has an assume, it may caused value tracking use the assume to do wrong simpilfy.
It would be better to make these simplification queries not use context at all, but that would require some API changes.
For now we just use the orignial instruction as context instruction to fix the issue.
Fix#56039
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D127942
createInductionResumeValues creates a phi node placeholder
without filling incoming values. Then it generates the incoming values.
It includes triggering of SCEV expander which may invoke SSAUpdater.
SSAUpdater has an optimization to detect number of predecessors
basing on incoming values if there is phi node.
In case phi node is not filled with incoming values - the number of predecessors
is detected as 0 and this leads to segmentation fault.
In other words SSAUpdater expects that phi is in good shape while
LoopVectorizer breaks this requirement.
The fix is just prepare all incoming values first and then build a phi node.
Reviewed By: fhahn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D128033
This avoid creating empty bins in AAPointerInfo which can lead to
segfaults. Also ensure we do not try to translate from callee to caller
except if we really take the argument state and move it to the call site
argument state.
Fixes: https://github.com/llvm/llvm-project/issues/55726
When determining liveness via Attributor::isAssumedDead(...) we might
end up without a liveness AA or with one pointing into another function.
Neither is helpful and we will avoid both from now on.
Reapplied after fixing the ASAN error which caused the revert:
db68a25ca9
During the reordering transformation we should try to avoid reordering bundles
like fadd,fsub because this may block them being matched into a single vector
instruction in x86.
We do this by checking if a TreeEntry is such a pattern and adding it to the
list of TreeEntries with orders that need to be considered.
Differential Revision: https://reviews.llvm.org/D125712
In some cases, a recurrence splice instructions needs to be inserted
between to regions, for example if the regions get re-arranged during
sinking.
Fixes#56146.
For non-mem-intrinsic and non-lifetime `CallBase`s, the current
`isRemovable` function only checks if the `CallBase` 1. has no uses 2.
will return 3. does not throw:
80fb782336/llvm/lib/Transforms/Scalar/DeadStoreElimination.cpp (L1017)
But we should also exclude invokes even in case they don't throw,
because they are terminators and thus cannot be removed. While it
doesn't seem to make much sense for `invoke`s to have an `nounwind`
target, this kind of code can be generated and is also valid bitcode.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D128224
Remove the known limitation of the library function call folders to only
work with top-level arrays of characters (as per the TODO comment in
the code) and allows them to also fold calls involving subobjects of
constant aggregates such as member arrays.
ExtractElement does not produce a vector out of a vector, so there's no need to
call a gather once done.
Fix#54469
Credits to npopov@redhat.com for the original approach.
Differential Revision: https://reviews.llvm.org/D126012
If the OffsetBeg + InsertVecSz is greater than VecSz, need to estimate
the cost as shuffle of 2 vector, not as insert of subvector. Otherwise,
the inserted subvector is out of range and compiler may crash.
Differential Revision: https://reviews.llvm.org/D128071
LoopPeel add new incoming values to exit phi nodes which can change the
SCEV for the phi after 20d798bd47.
Forget SCEVs for such phis.
Fixes#56044.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D128164
`llvm::max(Align, MaybeAlign)` and `llvm::max(MaybeAlign, Align)` are
not used often enough to be required. They also make the code more opaque.
Differential Revision: https://reviews.llvm.org/D128121
When threading, we always create a new block for the threaded edge
(even if the edge is not critical), which will later get folded back
into the predecessor if possible. Depending on precise processing
order, this separate block may break the detection of trivial
cycles in the threading code, which normally avoids infinite
threading of loops. Explicitly merge the created edge block into
the predecessor to avoid this.
Fixes https://github.com/llvm/llvm-project/issues/55765.
Differential Revision: https://reviews.llvm.org/D127216
Symmetric transfer is not a part of C++ standards. So the vendors is not
forced to implement it any way. Given the symmetric transfer nowadays is
an optimization. It makes more sense to enable it only if the
optimization is enabled. It is also helpful for the compilation speed in
O0.
We wanted to check if all uses of the function are direct calls, but the
code didn't account for passing the function as a parameter.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D128104
This reverts commit 7aa8a67882.
This version includes fixes to address issues uncovered after
the commit landed and discussed at D11448.
Those include:
* Limit select-traversal to selects inside the loop.
* Freeze pointers resulting from looking through selects to avoid
branch-on-poison.
The memcmp simplifier is limited to folding to constants calls with constant
arrays and constant sizes. This change adds the ability to simplify
memcmp(A, B, N) calls with constant A and B and variable N to the pseudocode
equivalent of
N <= Pos ? 0 : (A < B ? -1 : B < A ? +1 : 0)
where Pos is the offset of the first mismatch between A and B.
Differential Revision: https://reviews.llvm.org/D127766
When the mask is a power-of-2 constant and op0 is a shifted-power-of-2
constant, test if the shift amount equals the offset bit index:
(ShiftC << X) & C --> X == (log2(C) - log2(ShiftC)) ? C : 0
(ShiftC >> X) & C --> X == (log2(ShiftC) - log2(C)) ? C : 0
This is an alternate to D127610 with a more general pattern.
We match only shift+and instead of the trailing xor, so we see a few
more tests diffs. I think we discussed this initially in D126617.
Here are proofs for shifts in both directions:
https://alive2.llvm.org/ce/z/CFrLs4
The test diffs look equal or better for IR, and this makes the
patterns more uniform in IR. The backend can partially invert this
in both cases if that is profitable. It is not trivially reversible,
however, so if we find perf regressions that are not easy to undo,
then we may want to revert this.
Differential Revision: https://reviews.llvm.org/D127801
We really want to push freezes through recurrence phis, so that we
freeze only the start value, rather than the IV value on every
iteration. foldOpIntoPhi() already handles this for the case where
the transfer function doesn't produce poison, e.g.
%iv.next = add %iv, 1. However, this does not work if nowrap flags
are present, e.g. the very common %iv.next = add nuw %iv, 1 case.
This patch adds a fold that pushes freeze instructions to the start
value by checking whether all backedge values will be non-poison
after poison generating flags have been dropped. This allows pushing
freezes out of loops in most cases. I suspect that this also
obsoletes the CanonicalizeFreezeInLoops pass, and we can probably
drop it.
Fixes https://github.com/llvm/llvm-project/issues/56048.
Differential Revision: https://reviews.llvm.org/D127960
llvm.used and llvm.compiler.used are often used with inline assembly
that refers to a specific symbol so that the symbol is kept through to
the linker even though there are no references to it from LLVM IR.
This fixes the MergeFunctions pass to preserve references to these
symbols in llvm.used/llvm.compiler.used so they are not deleted from the
IR. This doesn't prevent these functions from being merged, but
guarantees that an alias or thunk with the expected symbol name is kept
in the IR.
Differential Revision: https://reviews.llvm.org/D127751
Profiling stopped working for us after D98061, which was largely a
Fuschia-specific patch but in one place used `isOSBinFormatELF` to
make a decision. I'm adding a PS4/PS5 exception to that, so we can
get profiling to work again.
Differential Revision: https://reviews.llvm.org/D127506
Profiling stopped working for us after D98061, which was largely a
Fuschia-specific patch but in one place used `isOSBinFormatELF` to
make a decision. I'm adding a PS4/PS5 exception to that, so we can
get profiling to work again.
Differential Revision: https://reviews.llvm.org/D127506
If the root scalar is mapped to to the smallest bit width, the vector is
truncated and the types between original buildvector and extracted value
mismatched. For extract, we emit sext/zext instructions, for shuffles we
can reuse oringal vector instead of the truncated one.
Differential Revision: https://reviews.llvm.org/D127974
Instead of using the underlying instruction and VF to get the type, use
the type of the incoming value. This removes an unnecessary dependence
on the underlying instruction and enables using the recipe without an
underlying instruction.
Currently scatter vectorize nodes can be emitted only for GEPs with
constant indices. But we can also emit such nodes for GEPs with the same
ptr and non-constant vectorizable/gathered indices, if profitable. Patch
adds support for such nodes and tries to improve handling of GEPs with
non-const indeces for such nodes.
Metric: SLP.NumVectorInstructions
Program SLP.NumVectorInstructions
results results0 diff
test-suite :: External/SPEC/CFP2017speed/638.imagick_s/638.imagick_s.test 5243.00 5240.00 -0.1%
test-suite :: External/SPEC/CFP2017rate/538.imagick_r/538.imagick_r.test 5243.00 5240.00 -0.1%
test-suite :: External/SPEC/CFP2017rate/526.blender_r/526.blender_r.test 27550.00 27507.00 -0.2%
test-suite :: External/SPEC/CFP2006/453.povray/453.povray.test 5395.00 5380.00 -0.3%
test-suite :: External/SPEC/CFP2017rate/511.povray_r/511.povray_r.test 5389.00 5374.00 -0.3%
test-suite :: External/SPEC/CINT2017rate/520.omnetpp_r/520.omnetpp_r.test 961.00 958.00 -0.3%
test-suite :: External/SPEC/CINT2017speed/620.omnetpp_s/620.omnetpp_s.test 961.00 958.00 -0.3%
test-suite :: External/SPEC/CFP2006/447.dealII/447.dealII.test 5664.00 5643.00 -0.4%
test-suite :: External/SPEC/CFP2017rate/510.parest_r/510.parest_r.test 13202.00 13127.00 -0.6%
test-suite :: External/SPEC/CINT2006/445.gobmk/445.gobmk.test 212.00 207.00 -2.4%
test-suite :: MultiSource/Benchmarks/7zip/7zip-benchmark.test 890.00 850.00 -4.5%
test-suite :: External/SPEC/CINT2006/464.h264ref/464.h264ref.test 1695.00 1581.00 -6.7%
test-suite :: MultiSource/Applications/JM/lencod/lencod.test 2338.00 2140.00 -8.5%
test-suite :: SingleSource/UnitTests/matrix-types-spec.test 63.00 55.00 -12.7%
test-suite :: SingleSource/Benchmarks/Adobe-C++/loop_unroll.test 468.00 356.00 -23.9%
Geomean difference -0.3%
All numbers show increased number of generated vector instructions.
Diff:
SingleSource/Benchmarks/Adobe-C++/loop_unroll - better without LTO, but
need an extra analysis with LTO (with LTO compiler generates
masked_gather, while before regular loads were emitted because of extra
data, availbale at LTO time).
SingleSource/UnitTests/matrix-types-spec - more vector code.
MultiSource/Applications/JM/lencod/lencod - same.
External/SPEC/CINT2006/464.h264ref/464.h264ref - same.
MultiSource/Benchmarks/7zip/7zip-benchmark - same.
External/SPEC/CINT2006/445.gobmk/445.gobmk - no changes.
External/SPEC/CFP2017rate/510.parest_r/510.parest_r - more vector code.
External/SPEC/CFP2006/447.dealII/447.dealII - same
External/SPEC/CINT2017speed/620.omnetpp_s/620.omnetpp_s - same
External/SPEC/CINT2017rate/520.omnetpp_r/520.omnetpp - same
External/SPEC/CFP2017rate/511.povray_r/511.povray - same
External/SPEC/CFP2006/453.povray/453.povray - same
External/SPEC/CFP2017rate/526.blender_r/526.blender_r - same
External/SPEC/CFP2017rate/538.imagick_r/538.imagick_r - same
External/SPEC/CFP2017speed/638.imagick_s/638.imagick_s - same
Differential Revision: https://reviews.llvm.org/D127219
Previously if the inliner split an SCC such that an empty one remained, the MLInlineAdvisor could potentially lose track of the EdgeCount if a subsequent CGSCC pass modified the calls of a function that was initially in the SCC pre-split. Saving the seen nodes in onPassEntry resolves this.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D127693
We can skip the analysis of the constant nodes, their order should not
affect the ordering of the trees/subtrees.
Differential Revision: https://reviews.llvm.org/D127775
Adding the `DW_CC_nocall` calling convention to the function debug metadata is needed when either the return values or the arguments of a function are removed as this helps in informing debugger that it may not be safe to call this function or try to interpret the return value.
This translates to setting `DW_AT_calling_convention` with `DW_CC_nocall` for appropriate DWARF DIEs.
The DWARF5 spec (section 3.3.1.1 Calling Convention Information) says:
If the `DW_AT_calling_convention` attribute is not present, or its value is the constant `DW_CC_normal`, then the subroutine may be safely called by obeying the `standard` calling conventions of the target architecture. If the value of the calling convention attribute is the constant `DW_CC_nocall`, the subroutine does not obey standard calling conventions, and it may not be safe for the debugger to call this subroutine.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D127134
If an instruction at the beginning of a block is erased, this may
trigger crash due to dereferencing an invalid iterator.
Check if II is at the end before dereferencing it.
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D127736
Adds option to print the contents of the Inline Advisor after each SCC Inliner pass
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D127689
GetValueInMiddleOfBlock uses result of GetValueAtEndOfBlockInternal if there is no value
defined for current basic block.
If there is already a value it tries (in this order):
to find single register coming from all predecessors
find existing phi node which matches our incoming registers
build new phi.
The compile time improvement is to use current available value if
it is defined out of current BB or it is a PHI register.
This is due to it can be used in the middle basic block.
Reviewed By: sameerds
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D126523
Remove the early exit if both constraints contain no variables. This
restriction is unnecessayr for correctness and removing it simplifies
handling of trivial constant conditions in follow-up changes.
If an integer PHI has an illegal type (according to the data layout) and
it is only used by `trunc` or `trunc(lshr)` operations, we split the PHI
into various instructions in its predecessors:
6d1543a167/llvm/lib/Transforms/InstCombine/InstCombinePHI.cpp (L1536-L1543)
So this can produce code like the following:
Before:
```
pred:
...
bb:
%p = phi i8 [ %somevalue, %pred ], ...
...
%tobool = trunc i8 %p to i1
use %tobool
...
```
In this code, `%p` has an illegal integer type, `i8`, and its only used
in a `trunc` instruction later. In this case this pass puts extraction
code in its predecessors:
After:
```
pred:
...
%t = and i8 %somevalue, 1
%extract = icmp ne i8 %t, 0
bb:
%p.new = phi i1 [ %extract, %pred ], ...
use %p.new instead of %tobool
```
But this doesn't work if `pred` is a `catchswitch` BB because it cannot
have any non-PHI instructions. This CL ensures we bail out in that case.
Fixes https://github.com/llvm/llvm-project/issues/55803.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D127699
OrigPHIsToFix is only used in the native path. Collecting phis can be
replaced by iterating over the plan. This also removes another
unnecessary use of a late getVPValue.
This also reduces the coupling between ILV and the VPlan utilities.
Removes the workaround from https://reviews.llvm.org/D98509#2732628 for
an AIX build compiler issue.
The AIX build compiler product that caused the issue has since been
fixed. Also, the AIX build compiler has been changed to one based on
LLVM.
This shows narrowing improvements on the logic tests
(transforms recently added with e247b0e5c9).
This is not a complete fix. That would require adding
folds to visitOr/visitXor. But it enables the expected
transforms for the basic patterns in the affected tests.
Handle the fact that not only constant expressions, but also
constant aggregates containing expressions can trap.
This still doesn't fix the original C reproducer, probably due to
more issues remaining in other passes.
When pushing an operation across a phi node, we should avoid doing
so across a loop backedge. This is generally non-profitable, because
it does not reduce the number of times the operation is executed,
and could lead to an infinite combine loop.
The code was already guarding against this, but using an
insufficiently strong condition, which did not cover the case where
the operation was originally outside the loop (in which case the
transform moves the operation from outside the loop into the loop,
which is particularly undesirable).
Differential Revision: https://reviews.llvm.org/D127499
The 1st try ( afa192cfb6 ) was reverted because it could
cause an infinite loop with constant expressions.
A test for that and an extra condition to enable the transform
are added now. I also added code comments to better describe
the transform and the existing, related transform.
Original commit message:
https://alive2.llvm.org/ce/z/hRy3rE
As shown in D123408, we can produce this pattern when moving
casts around, and we already have a related fold for a binop
with a constant operand.
In foldSelectIntoOp we sometimes transform a select of a fadd into a
fadd of a select, where we select between data and an identity value.
For both fadd and fsub the identity is always -0.0, but if the nsz
flag is set on the select instruction we can use +0.0 instead. Doing
so then triggers other optimisations, such as when folding the select
of masked load into a new masked load.
Differential Revision: https://reviews.llvm.org/D126774
This patch improves the fix in D110529 to prevent from crashing on value
with byval attribute that is not added in SCCP solver.
Authored-by: sinan.lin@linux.alibaba.com
Reviewed By: ChuanqiXu
Differential Revision: https://reviews.llvm.org/D126355
This adds a fold for aggressive instcombine that converts
smin(smax(fptosi(x))) into a llvm.fptosi.sat, providing that the
saturation constants are correct and the cost of the llvm.fptosi.sat is
lower.
Unfortunately, a llvm.fptosi.sat cannot always be converted back to a
smin/smax/fptosi. The llvm.fptosi.sat intrinsic is more defined that the
original, which produces poison if the original fptosi was out of range.
The llvm.fptosi.sat will saturate any value, so needs to be expanded to
a fptosi(fpmin(fpmax(x))), which can be worse for codegeneration
depending on the target.
So this change thais conditional on the backend reporting that the
llvm.fptosi.sat is cheaper that the original smin+smax+fptost. This is
a change to the way that AggressiveInstrcombine has worked in the past.
Instead of just being a canonicalization pass, that canonicalization can
be dependant on the target in certain specific cases.
Differential Revision: https://reviews.llvm.org/D125755
Teach the unroller(s) how to handle an invalid cost. This avoids crashes when the backend can't provide a cost due to either a fundemental limitation or an unimplemented cost model case.
Differential Revision: https://reviews.llvm.org/D127305
Per the documentation in Support/InstructionCost.h, the purpose of an invalid cost is so that clients can change behavior on impossible to cost inputs. CodeMetrics was instead asserting that invalid costs never occurred.
On a target with an incomplete cost model - e.g. RISCV - this means that transformations would crash on (falsely) invalid constructs - e.g. scalable vectors. While we certainly should improve the cost model - and I plan to do so in the near future - we also shouldn't be crashing. This violates the explicitly stated purpose of an invalid InstructionCost.
I updated all of the "easy" consumers where bailouts were locally obvious. I plan to follow up with loop unroll in a following change.
Differential Revision: https://reviews.llvm.org/D127131
https://alive2.llvm.org/ce/z/hRy3rE
As shown in D123408, we can produce this pattern when moving
cast around, and we already have a related fold for a binop
with a constant operand.
For the longest time we used `AAValueSimplify` and
`genericValueTraversal` to determine "potential values". This was
problematic for many reasons:
- We recomputed the result a lot as there was no caching for the 9
locations calling `genericValueTraversal`.
- We added the idea of "intra" vs. "inter" procedural simplification
only as an afterthought. `genericValueTraversal` did offer an option
but `AAValueSimplify` did not. Thus, we might end up with "too much"
simplification in certain situations and then gave up on it.
- Because `genericValueTraversal` was not a real `AA` we ended up with
problems like the infinite recursion bug (#54981) as well as code
duplication.
This patch introduces `AAPotentialValues` and replaces the
`AAValueSimplify` uses with it. `genericValueTraversal` is folded into
`AAPotentialValues` as are the instruction simplifications performed in
`AAValueSimplify` before. We further distinguish "intra" and "inter"
procedural simplification now.
`AAValueSimplify` was not deleted as we haven't ported the
re-materialization of instructions yet. There are other differences over
the former handling, e.g., we may not fold trivially foldable
instructions right now, e.g., `add i32 1, 1` is not folded to `i32 2`
but if an operand would be simplified to `i32 1` we would fold it still.
We are also even more aware of function/SCC boundaries in CGSCC passes,
which is good.
Fixes: https://github.com/llvm/llvm-project/issues/54981
When determining liveness via Attributor::isAssumedDead(...) we might
end up without a liveness AA or with one pointing into another function.
Neither is helpful and we will avoid both from now on.
Clang-format InstructionSimplify and convert all "FunctionName"s to
"functionName". This patch does touch a lot of files but gets done with
the cleanup of InstructionSimplify in one commit.
This is the alternative to the less invasive clang-format only patch: D126783
Reviewed By: spatel, rengolin
Differential Revision: https://reviews.llvm.org/D126889
All information is already available in VPlan. Note that there are some
test changes, because we now can correctly look through instructions
like truncates to analyze the actual users.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D123541
We can use constant to allow undef and there is no need to force
integers in the API anyway. The user can decide if a non integer
constant is fine or not.
We need to be careful replacing values as call site arguments
(IRPosition::IRP_CALL_SITE_ARGUMENT) is representing a use and not a
value. This patch replaces the interface to take a IR position instead
making it harder to misuse accidentally. It does not change our tests
right now but a follow up exposed the potential footgun.
Florian Hahn