On little endian targets prior to Power9, we spill vector registers using a
swapping store (i.e. stdxvd2x saves the vector with the two doublewords in
big endian order regardless of endianness). This is generally not a problem
since we restore them using the corresponding swapping load (lxvd2x). However
if the restore is done by the unwinder, the vector register contains data in
the incorrect order.
This patch fixes that by using Altivec loads/stores for vector saves and
restores in PEI (which keep the order correct) under those specific conditions:
- EH aware function
- Subtarget requires swaps for VSX memops (Little Endian prior to Power9)
Differential revision: https://reviews.llvm.org/D73692
A known limitation for Future CPU is that the new prefixed instructions may
not cross 64 Byte boundaries.
All instructions are already 4 byte aligned so the only situation where this
can occur is when the prefix is in one 64 byte block and the instruction that
is prefixed is at the top of the next 64 byte block. To fix this case
PPCELFStreamer was added to intercept EmitInstruction. When a prefixed
instruction is emitted we try to align it to 64 Bytes by adding a maximum of
4 bytes. If the prefixed instruction crosses the 64 Byte boundary then the
alignment would trigger and a 4 byte nop would be added to push the
instruction into the next 64 byte block.
Differential Revision: https://reviews.llvm.org/D72570
Future CPU will include support for prefixed instructions.
These prefixed instructions are formed by a 4 byte prefix
immediately followed by a 4 byte instruction effectively
making an 8 byte instruction. The new instruction paddi
is a prefixed form of addi.
This patch adds paddi and all of the support required
for that instruction. The majority of the patch deals with
supporting the new prefixed instructions. The addition of
paddi is mainly to allow for testing.
Differential Revision: https://reviews.llvm.org/D72569
In GlobalISel we may in some unfortunate circumstances generate PHIs with
operands that are on separate banks. If-conversion doesn't currently check for
that case and ends up generating a CSEL on AArch64 with incorrect register
operands.
Differential Revision: https://reviews.llvm.org/D72961
We removed UseVSXReg flag in https://reviews.llvm.org/D58685
But we did not reclain the bit 6 it was assigned,
this will become confusing and a hole later..
We should reclaim it as early as possible before new bits.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D72649
PowerPC uses a dedicated method to check if the machine instr is
predicable by opcode. However, there's a bit `isPredicable` in instr
definition. This patch removes the method and set the bit only to
opcodes referenced in it.
Differential Revision: https://reviews.llvm.org/D71921
MachineInstr.h included AliasAnalysis.h, which includes a world of IR
constructs mostly unneeded in CodeGen. Prune it. Same for
DebugInfoMetadata.h.
Noticed with -ftime-trace.
llvm-svn: 375311
Neither the base implementation of findCommutedOpIndices nor any in-tree target modifies the instruction passed in and there is no reason why they would in the future.
Committed on behalf of @hvdijk (Harald van Dijk)
Differential Revision: https://reviews.llvm.org/D66138
llvm-svn: 372882
Recommit: fix asan errors.
The way MachinePipeliner uses these target hooks is stateful - we reduce trip
count by one per call to reduceLoopCount. It's a little overfit for hardware
loops, where we don't have to worry about stitching a loop induction variable
across prologs and epilogs (the induction variable is implicit).
This patch introduces a new API:
/// Analyze loop L, which must be a single-basic-block loop, and if the
/// conditions can be understood enough produce a PipelinerLoopInfo object.
virtual std::unique_ptr<PipelinerLoopInfo>
analyzeLoopForPipelining(MachineBasicBlock *LoopBB) const;
The return value is expected to be an implementation of the abstract class:
/// Object returned by analyzeLoopForPipelining. Allows software pipelining
/// implementations to query attributes of the loop being pipelined.
class PipelinerLoopInfo {
public:
virtual ~PipelinerLoopInfo();
/// Return true if the given instruction should not be pipelined and should
/// be ignored. An example could be a loop comparison, or induction variable
/// update with no users being pipelined.
virtual bool shouldIgnoreForPipelining(const MachineInstr *MI) const = 0;
/// Create a condition to determine if the trip count of the loop is greater
/// than TC.
///
/// If the trip count is statically known to be greater than TC, return
/// true. If the trip count is statically known to be not greater than TC,
/// return false. Otherwise return nullopt and fill out Cond with the test
/// condition.
virtual Optional<bool>
createTripCountGreaterCondition(int TC, MachineBasicBlock &MBB,
SmallVectorImpl<MachineOperand> &Cond) = 0;
/// Modify the loop such that the trip count is
/// OriginalTC + TripCountAdjust.
virtual void adjustTripCount(int TripCountAdjust) = 0;
/// Called when the loop's preheader has been modified to NewPreheader.
virtual void setPreheader(MachineBasicBlock *NewPreheader) = 0;
/// Called when the loop is being removed.
virtual void disposed() = 0;
};
The Pipeliner (ModuloSchedule.cpp) can use this object to modify the loop while
allowing the target to hold its own state across all calls. This API, in
particular the disjunction of creating a trip count check condition and
adjusting the loop, improves the code quality in ModuloSchedule.cpp.
llvm-svn: 372463
The way MachinePipeliner uses these target hooks is stateful - we reduce trip
count by one per call to reduceLoopCount. It's a little overfit for hardware
loops, where we don't have to worry about stitching a loop induction variable
across prologs and epilogs (the induction variable is implicit).
This patch introduces a new API:
/// Analyze loop L, which must be a single-basic-block loop, and if the
/// conditions can be understood enough produce a PipelinerLoopInfo object.
virtual std::unique_ptr<PipelinerLoopInfo>
analyzeLoopForPipelining(MachineBasicBlock *LoopBB) const;
The return value is expected to be an implementation of the abstract class:
/// Object returned by analyzeLoopForPipelining. Allows software pipelining
/// implementations to query attributes of the loop being pipelined.
class PipelinerLoopInfo {
public:
virtual ~PipelinerLoopInfo();
/// Return true if the given instruction should not be pipelined and should
/// be ignored. An example could be a loop comparison, or induction variable
/// update with no users being pipelined.
virtual bool shouldIgnoreForPipelining(const MachineInstr *MI) const = 0;
/// Create a condition to determine if the trip count of the loop is greater
/// than TC.
///
/// If the trip count is statically known to be greater than TC, return
/// true. If the trip count is statically known to be not greater than TC,
/// return false. Otherwise return nullopt and fill out Cond with the test
/// condition.
virtual Optional<bool>
createTripCountGreaterCondition(int TC, MachineBasicBlock &MBB,
SmallVectorImpl<MachineOperand> &Cond) = 0;
/// Modify the loop such that the trip count is
/// OriginalTC + TripCountAdjust.
virtual void adjustTripCount(int TripCountAdjust) = 0;
/// Called when the loop's preheader has been modified to NewPreheader.
virtual void setPreheader(MachineBasicBlock *NewPreheader) = 0;
/// Called when the loop is being removed.
virtual void disposed() = 0;
};
The Pipeliner (ModuloSchedule.cpp) can use this object to modify the loop while
allowing the target to hold its own state across all calls. This API, in
particular the disjunction of creating a trip count check condition and
adjusting the loop, improves the code quality in ModuloSchedule.cpp.
llvm-svn: 372376
Summary:
In PostRA phase, we often have to find out the most recent definition
of a register. This patch adds getDefMIPostRA so that other methods
can use it rather than implementing it repeatedly.
Differential Revision: https://reviews.llvm.org/D65131
llvm-svn: 366990
After implemented this hook, we will model the memory dependency in the scheduling dependency graph more precise,
and will have more opportunity to reorder the load/stores, as they didn't have the dependency at some condition
Differential Revision: https://reviews.llvm.org/D63804
llvm-svn: 364886
Implement necessary target hooks to enable MachinePipeliner for P9 only.
The pass is off by default, can be enabled with -ppc-enable-pipeliner for P9.
Differential Revision: https://reviews.llvm.org/D62164
llvm-svn: 363085
The UseVSXReg flag can be safely removed and the code cleaned up.
Patch By: Yi-Hong Liu
Differential Revision: https://reviews.llvm.org/D58685
llvm-svn: 357028
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
If we are changing the MI operand from Reg to Imm, we need also handle its implicit use if have.
Differential Revision: https://reviews.llvm.org/D56078
llvm-svn: 350115
The D-Form VSX loads introduced in ISA 3.0 are not direct D-Form equivalent of
the corresponding X-Forms since they only target the Altivec registers.
Namely LXSSPX can load into any of the 64 VSX registers whereas LXSSP can only
load into the upper 32 VSX registers. Similarly with the remaining affected
instructions.
There is currently no way that I can see to trigger the bug, but as we add other
ways of exploiting these instructions, there may very well be instances that do.
This is an NFC patch in practical terms since the changes it introduces can not
be triggered without an MIR test.
Differential revision: https://reviews.llvm.org/D53323
llvm-svn: 344894
There are occasionally instances where AADB rewrites registers in such a way
that a reg-reg copy becomes a self-copy. Such an instruction is obviously
redundant and can be removed. This patch does precisely that.
Note that this will not remove various nop's that we insert (which are
themselves just self-copies). The reason those are left alone is that all of
them have their own opcodes (that just encode to a self-copy).
What prompted this patch is the fact that these self-copies sometimes end up
using registers that make the instruction a priority-setting nop, thereby
having a significant effect on performance.
Differential revision: https://reviews.llvm.org/D52432
llvm-svn: 344036
We have an unfortunate situation in our back end where we have to keep pairs of
functions synchronized. Needless to say that this is not an ideal situation as
it is very difficult to enforce. Even without bugs, it's annoying to have to do
the same thing in two places.
This patch just refactors the code so that the two pairs of those functions that
pertain to printing register operands are unified:
- stripRegisterPrefix() - this just removes the letter prefixes from registers
for the InstrPrinter and AsmPrinter. This patch provides this as a static
member of PPCRegisterInfo
- Handling of PPCII::UseVSXReg - there are 3 places where we do something
special for instructions with that flag set. Each of those places does its
own checking of this flag and implements code customization. Any changes to
how we print/encode VSX/VMX registers require modifying all 3 places. This
patch unifies this into a static function in PPCInstrInfo that returns the
register number adjusted as needed.
Differential revision: https://reviews.llvm.org/D52467
llvm-svn: 343195
If the arch is P8, we will select XFLOAD to load the floating point, and then, expand it to vsx and non-vsx X-form instruction post RA. This patch is trying to convert the X-form to D-form if it meets the requirement that one operand of the x-form inst is the special Zero register, and another operand fed by add inst. i.e.
y = add imm, reg
LFDX. 0, y
-->
LFD imm(reg)
Reviewers: Nemanjai
Differential Revision: https://reviews.llvm.org/D49007
llvm-svn: 340149
A new function getOpcodeForSpill should now be the only place to get
the opcode for a given spilled register.
Differential Revision: https://reviews.llvm.org/D43086
llvm-svn: 328556
This patch adds functions to allow MachineLICM to hoist invariant stores.
Currently, MachineLICM does not hoist any store instructions, however
when storing the same value to a constant spot on the stack, the store
instruction should be considered invariant and be hoisted. The function
isInvariantStore iterates each operand of the store instruction and checks
that each register operand satisfies isCallerPreservedPhysReg. The store
may be fed by a copy, which is hoisted by isCopyFeedingInvariantStore.
This patch also adds the PowerPC changes needed to consider the stack
register as caller preserved.
Differential Revision: https://reviews.llvm.org/D40196
llvm-svn: 328326
This patch adds functions to allow MachineLICM to hoist invariant stores.
Currently, MachineLICM does not hoist any store instructions, however
when storing the same value to a constant spot on the stack, the store
instruction should be considered invariant and be hoisted. The function
isInvariantStore iterates each operand of the store instruction and checks
that each register operand satisfies isCallerPreservedPhysReg. The store
may be fed by a copy, which is hoisted by isCopyFeedingInvariantStore.
This patch also adds the PowerPC changes needed to consider the stack
register as caller preserved.
Differential Revision: https://reviews.llvm.org/D40196
llvm-svn: 327856
Revision 320791 introduced a pass that transforms reg+reg instructions to
reg+imm if they're fed by "load immediate". However, it didn't
handle out-of-range shifts correctly as reported in PR35688.
This patch fixes that and therefore the PR.
Furthermore, there was undefined behaviour in the patch where the RHS of an
initialization expression was 32 bits and constant `1` was shifted left 32
bits. This was fixed by ensuring the RHS is 64 bits just like the LHS.
Differential Revision: https://reviews.llvm.org/D41369
llvm-svn: 321551
This patch adds the necessary infrastructure to convert instructions that
take two register operands to those that take a register and immediate if
the necessary operand is produced by a load-immediate. Furthermore, it uses
this infrastructure to perform such conversions twice - first at MachineSSA
and then pre-emit.
There are a number of reasons we may end up with opportunities for this
transformation, including but not limited to:
- X-Form instructions chosen since the exact offset isn't available at ISEL time
- Atomic instructions with constant operands (we will add patterns for this
in the future)
- Tail duplication may duplicate code where one block contains this redundancy
- When emitting compare-free code in PPCDAGToDAGISel, we don't handle constant
comparands specially
Furthermore, this patch moves the initialization of PPCMIPeepholePass so that
it can be used for MIR tests.
llvm-svn: 320791
This patch adds a peep hole optimization to remove any redundant toc save
instructions added as part of the call sequence for indirect calls. It removes
any toc saves within a function that are dominated by another toc save.
Differential Revision: https://reviews.llvm.org/D39736
llvm-svn: 319087
The VSX versions have the advantage of a full 64-register target whereas the FP
ones have the advantage of lower latency and higher throughput. So what we’re
after is using the faster instructions in low register pressure situations and
using the larger register file in high register pressure situations.
The heuristic chooses between the following 7 pairs of instructions.
PPC::LXSSPX vs PPC::LFSX
PPC::LXSDX vs PPC::LFDX
PPC::STXSSPX vs PPC::STFSX
PPC::STXSDX vs PPC::STFDX
PPC::LXSIWAX vs PPC::LFIWAX
PPC::LXSIWZX vs PPC::LFIWZX
PPC::STXSIWX vs PPC::STFIWX
Differential Revision: https://reviews.llvm.org/D38486
llvm-svn: 318651
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
This patch enables redundant sign- and zero-extension elimination in PowerPC MI Peephole pass.
If the input value of a sign- or zero-extension is known to be already sign- or zero-extended, the operation is redundant and can be eliminated.
One common case is sign-extensions for a method parameter or for a method return value; they must be sign- or zero-extended as defined in PPC ELF ABI.
For example of the following simple code, two extsw instructions are generated before the invocation of int_func and before the return. With this patch, both extsw are eliminated.
void int_func(int);
void ii_test(int a) {
if (a & 1) return int_func(a);
}
Such redundant sign- or zero-extensions are quite common in many programs; e.g. I observed about 60,000 occurrences of the elimination while compiling the LLVM+CLANG.
Differential Revision: https://reviews.llvm.org/D31319
llvm-svn: 315888
Define target hook isReallyTriviallyReMaterializable() to explicitly specify
PowerPC instructions that are trivially rematerializable. This will allow
the MachineLICM pass to accurately identify PPC instructions that should always
be hoisted.
Differential Revision: https://reviews.llvm.org/D34255
llvm-svn: 305932
This patch builds upon https://reviews.llvm.org/rL302810 to add
handling for bitwise logical operations in general purpose registers.
The idea is to keep the values in GPRs as long as possible - only
extracting them to a condition register bit when no further operations
are to be done.
Differential Revision: https://reviews.llvm.org/D31851
llvm-svn: 304282
In addition to the original commit, tighten the condition for when to
pad empty functions to COFF Windows. This avoids running into problems
when targeting e.g. Win32 AMDGPU, which caused test failures when this
was committed initially.
llvm-svn: 301047
Empty functions can lead to duplicate entries in the Guard CF Function
Table of a binary due to multiple functions sharing the same RVA,
causing the kernel to refuse to load that binary.
We had a terrific bug due to this in Chromium.
It turns out we were already doing this for Mach-O in certain
situations. This patch expands the code for that in
AsmPrinter::EmitFunctionBody() and renames
TargetInstrInfo::getNoopForMachoTarget() to simply getNoop() since it
seems it was used for not just Mach-O anyway.
Differential Revision: https://reviews.llvm.org/D32330
llvm-svn: 301040
This patch corresponds to review:
https://reviews.llvm.org/D23155
This patch removes the VSHRC register class (based on D20310) and adds
exploitation of the Power9 sub-word integer loads into VSX registers as well
as vector sign extensions.
The new instructions are useful for a few purposes:
Int to Fp conversions of 1 or 2-byte values loaded from memory
Building vectors of 1 or 2-byte integers with values loaded from memory
Storing individual 1 or 2-byte elements from integer vectors
This patch implements all of those uses.
llvm-svn: 283190
Nemanja Ivanovic