This patch is a fix following the revert of 72ce759
(https://reviews.llvm.org/rG72ce759928e6dfee6a9efa310b966c19722352ba)
and fixes the failure that it caused.
The above patch failed on the Thread Sanitizer buildbot with an out of
memory error. After an investigation, the cause was identified as an
explosion in debug intrinsics while running the Jump Threading pass on
ModuleMap.ll. The above patched prevented debug intrinsics from being
dropped when their Basic Block was deleted due to being "empty". In this
case, one of the functions in ModuleMap.ll had (after many optimization
passes) a very large number of debug intrinsics representing a set of
repeatedly inlined variables. Previously the vast majority of these were
silently dropped during Jump Threading when their blocks were deleted,
but as of the above patch they survived for longer, causing a large
increase in the number of debug intrinsics. These intrinsics were then
repeatedly cloned by the Jump Threading pass as edges were threaded,
multiplying the intrinsic count further. The memory consumed by this
process spiralled out of control, crashing the buildbot that uses TSan
(which has an estimated 5-10x memory overhead compared to non-sanitized
builds).
This patch adds RemoveRedundantDbgInstrs to the Jump Threading pass, in
order to reduce the number of debug intrinsics down to a manageable
amount in cases where many intrinsics for the same variable end up
bunched together contiguously, as in this case.
Differential Revision: https://reviews.llvm.org/D73054
This reverts commit 41784bed01.
Since the original revision ead815924e,
this revision fixes three issues:
- This revision fixes the Windows build. My original patch improperly
copied EH pads on Windows. This patch disregards jump threading
opportunities having to do with EH pads.
- This revision fixes jump threading to a wrong destination.
Specifically, my original patch treated any Constant other than 0 as 1
while evaluating the branch condition. This bug led to treating
constant expressions like:
icmp ugt i8* null, inttoptr (i64 4 to i8*)
to "true". This patch fixes the bug by calling isOneValue.
- This revision fixes the cost calculation of two basic blocks being
threaded through. Note that getJumpThreadDuplicationCost returns
"(unsigned)~0" for those basic blocks that cannot be duplicated. If
we sum of two return values from getJumpThreadDuplicationCost, we
could have an unsigned overflow like:
(unsigned)~0 + 5 = 4
and mistakenly determine that it's safe and profitable to proceed
with the jump threading opportunity. The patch fixes the bug by
checking each return value before summing them up.
[JumpThreading] Thread jumps through two basic blocks
Summary:
This patch teaches JumpThreading.cpp to thread through two basic
blocks like:
bb3:
%var = phi i32* [ null, %bb1 ], [ @a, %bb2 ]
%tobool = icmp eq i32 %cond, 0
br i1 %tobool, label %bb4, label ...
bb4:
%cmp = icmp eq i32* %var, null
br i1 %cmp, label bb5, label bb6
by duplicating basic blocks like bb3 above. Once we duplicate bb3 as
bb3.dup and redirect edge bb2->bb3 to bb2->bb3.dup, we have:
bb3:
%var = phi i32* [ @a, %bb2 ]
%tobool = icmp eq i32 %cond, 0
br i1 %tobool, label %bb4, label ...
bb3.dup:
%var = phi i32* [ null, %bb1 ]
%tobool = icmp eq i32 %cond, 0
br i1 %tobool, label %bb4, label ...
bb4:
%cmp = icmp eq i32* %var, null
br i1 %cmp, label bb5, label bb6
Then the existing code in JumpThreading.cpp can thread edge
bb3.dup->bb4 through bb4 and eventually create bb3.dup->bb5.
Reviewers: wmi
Subscribers: hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70247
Duplicating instructions can lead to code size increases but using
a threshold of 3 is good for reducing code size.
Differential Revision: https://reviews.llvm.org/D72916
This is a rebase of the change over D70376, which fixes an LVI cache
invalidation issue that also affected this patch.
-----
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this change not fully NFC, because we can now fold
terminator icmps based on the dereferencability information in the
same block. This is the reason why I changed one JumpThreading test
(it would optimize the condition away without the change).
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
Summary:
Without this patch, the jump threading pass ignores profiling data
whenever we invoke the pass with the new pass manager.
Specifically, JumpThreadingPass::run calls runImpl with class variable
HasProfileData always set to false. In turn, runImpl sets
HasProfileData to false again:
HasProfileData = HasProfileData_;
In the end, we don't use profiling data at all with the new pass
manager.
This patch fixes the problem by passing F.hasProfileData() to runImpl.
The bug appears to have been introduced at:
https://reviews.llvm.org/D41461
which removed local variable HasProfileData in JumpThreadingPass::run
even though there was one more use left in the same function. As a
result, the remaining use ended referring to the class variable
instead.
Note that F.hasProfileData is an extremely lightweight function, so I
don't see the need to cache its result. Once this patch is approved,
I'm planning to stop caching the result of F.hasProfileData in
runOnFunction.
Reviewers: wmi, eli.friedman
Subscribers: hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70509
Fix cache invalidation by not guarding the dereferenced pointer cache
erasure by SeenBlocks. SeenBlocks is only populated when actually
caching a value in the block, which doesn't necessarily have to happen
just because dereferenced pointers were calculated.
-----
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this change not fully NFC, because we can now fold
terminator icmps based on the dereferencability information in the
same block. This is the reason why I changed one JumpThreading test
(it would optimize the condition away without the change).
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
This reverts commit 15bc4dc9a8.
clang-cmake-x86_64-sde-avx512-linux buildbot reported quite a few
compile-time regressions in test-suite, will investigate.
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this change not fully NFC, because we can now fold
terminator icmps based on the dereferencability information in the
same block. This is the reason why I changed one JumpThreading test
(it would optimize the condition away without the change).
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
For consistency with normal instructions and clarity when reading IR,
it's best to print the %0, %1, ... names of function arguments in
definitions.
Also modifies the parser to accept IR in that form for obvious reasons.
llvm-svn: 367755
unreachable loop.
updatePredecessorProfileMetadata in jumpthreading tries to find the
first dominating predecessor block for a PHI value by searching upwards
the predecessor block chain.
But jumpthreading may see some temporary IR state which contains
unreachable bb not being cleaned up. If an unreachable loop happens to
be on the predecessor block chain, keeping chasing the predecessor
block will run into an infinite loop.
The patch fixes it.
Differential Revision: https://reviews.llvm.org/D65310
llvm-svn: 367154
If the block being cloned contains a PHI node, in general, we need to
clone that PHI node, even though it's trivial. If the operand of the PHI
is an instruction in the block being cloned, the correct value for the
operand doesn't exist until SSAUpdater constructs it.
We usually don't hit this issue because we try to avoid threading across
loop headers, but it's possible to hit this in some cases involving
irreducible CFGs. I added a flag to allow threading across loop headers
to make the testcase easier to understand.
Thanks to Brian Rzycki for reducing the testcase.
Fixes https://bugs.llvm.org/show_bug.cgi?id=42085.
Differential Revision: https://reviews.llvm.org/D63913
llvm-svn: 365094
Summary:
The return value of a TryToUnfoldSelect call was not checked, which led to an
incorrectly preserved loop info and some crash.
The original crash was reported on https://reviews.llvm.org/D59514.
Reviewers: davidxl, amehsan
Reviewed By: davidxl
Subscribers: fhahn, brzycki, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61920
llvm-svn: 360780
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
Fixes bug 40992: https://bugs.llvm.org/show_bug.cgi?id=40992
There is potential for miscompiled code emitted from JumpThreading when
analyzing a block with one or more indirectbr or callbr predecessors. The
ProcessThreadableEdges() function incorrectly folds conditional branches
into an unconditional branch.
This patch prevents incorrect branch folding without fully pessimizing
other potential threading opportunities through the same basic block.
This IR shape was manually fed in via opt and is unclear if clang and the
full pass pipeline will ever emit similar code shapes.
Thanks to Matthias Liedtke for the bug report and simplified IR example.
Differential Revision: https://reviews.llvm.org/D60284
llvm-svn: 357930
These now verify that a given instruction has a specific source
location, rather than any old location. We want to make sure we
propagate the correct locations from one instruction to another.
llvm-svn: 356217
Fixes bug 37966: https://bugs.llvm.org/show_bug.cgi?id=37966
The Jump Threading pass will replace certain conditional branch
instructions with unconditional branches when it can prove that only one
branch can occur. Prior to this patch, it would not carry the debug
info from the old instruction to the new one.
This patch fixes the bug described by copying the debug info from the
conditional branch instruction to the new unconditional branch
instruction, and adds a regression test for the Jump Threading pass that
covers this case.
Patch by Stephen Tozer!
Differential Revision: https://reviews.llvm.org/D58963
llvm-svn: 355822
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
Currently when a select has a constant value in one branch and the select feeds
a conditional branch (via a compare/ phi and compare) we unfold the select
statement. This results in threading the conditional branch later on. Similar
opportunity exists when a select (with a constant in one branch) feeds a
switch (via a phi node). The patch unfolds select under this condition.
A testcase is provided.
llvm-svn: 350931
ComputeValueKnownInPredecessors has a "visited" set to prevent infinite
loops, since a value can be visited more than once. However, the
implementation didn't prevent the algorithm from taking exponential
time. Instead of removing elements from the RecursionSet one at a time,
we should keep around the whole set until
ComputeValueKnownInPredecessors finishes, then discard it.
The testcase is synthetic because I was having trouble effectively
reducing the original. But it's basically the same idea.
Instead of failing, we could theoretically cache the result instead.
But I don't think it would help substantially in practice.
Differential Revision: https://reviews.llvm.org/D54239
llvm-svn: 346562
As K has to dominate I, IIUC I's range metadata must be a subset of
K's. After Eli's recent clarification to the LangRef, loading a value
outside of the range is undefined behavior.
Therefore if I's range contains elements outside of K's range and we would load
one such value, K would cause undefined behavior.
In cases like hoisting/sinking, we still want the most generic range
over all code paths to/from the hoist/sink point. As suggested in the
patches related to D47339, I will refactor the handling of those
scenarios and try to decouple it from this function as follow up, once
we switched to a similar handling of metadata in most of
combineMetadata.
I updated some tests checking mostly the merging of metadata to keep the
metadata of to dominating load. The most interesting one is probably test8 in
test/Transforms/JumpThreading/thread-loads.ll. It contained a comment
about the alias metadata preventing us to eliminate the branch, but it
seem like the actual problem currently is that we merge the ranges of
both loads and cannot eliminate the icmp afterwards. With this patch, we
manage to eliminate the icmp, as the range of the first load excludes 8.
Reviewers: efriedma, nlopes, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51629
llvm-svn: 345456
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
llvm-svn: 340606
Summary:
When recording uses we need to rewrite after cloning a loop we need to
check if the use is not dominated by the original def. The initial
assumption was that the cloned basic block will introduce a new path and
thus the original def will only dominate the use if they are in the same
BB, but as the reproducer from PR37745 shows it's not always the case.
This fixes PR37745.
Reviewers: haicheng, Ka-Ka
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48111
llvm-svn: 335675
phi is on lhs of a comparison op.
For the following testcase,
L1:
%t0 = add i32 %m, 7
%t3 = icmp eq i32* %t2, null
br i1 %t3, label %L3, label %L2
L2:
%t4 = load i32, i32* %t2, align 4
br label %L3
L3:
%t5 = phi i32 [ %t0, %L1 ], [ %t4, %L2 ]
%t6 = icmp eq i32 %t0, %t5
br i1 %t6, label %L4, label %L5
We know if we go through the path L1 --> L3, %t6 should always be true. However
currently, if the rhs of the eq comparison is phi, JumpThreading fails to
evaluate %t6 to true. And we know that Instcombine cannot guarantee always
canonicalizing phi to the left hand side of the comparison operation according
to the operand priority comparison mechanism in instcombine. The patch handles
the case when rhs of the comparison op is a phi.
Differential Revision: https://reviews.llvm.org/D46275
llvm-svn: 331266
Reapply the patches with a fix. Thanks Ilya and Hans for the reproducer!
This reverts commit r330416.
The issue was that removing predecessors invalidated uses that we stored
for rewrite. The fix is to finish manipulating with CFG before we select
uses for rewrite.
llvm-svn: 330431
Revert r330413: "[SSAUpdaterBulk] Use SmallVector instead of DenseMap for storing rewrites."
Revert r330403 "Reapply "[PR16756] Use SSAUpdaterBulk in JumpThreading." one more time."
r330403 commit seems to crash clang during our integrate while doing PGO build with the following stacktrace:
#2 llvm::SSAUpdaterBulk::RewriteAllUses(llvm::DominatorTree*, llvm::SmallVectorImpl<llvm::PHINode*>*)
#3 llvm::JumpThreadingPass::ThreadEdge(llvm::BasicBlock*, llvm::SmallVectorImpl<llvm::BasicBlock*> const&, llvm::BasicBlock*)
#4 llvm::JumpThreadingPass::ProcessThreadableEdges(llvm::Value*, llvm::BasicBlock*, llvm::jumpthreading::ConstantPreference, llvm::Instruction*)
#5 llvm::JumpThreadingPass::ProcessBlock(llvm::BasicBlock*)
The crash happens while compiling 'lib/Analysis/CallGraph.cpp'.
r3340413 is reverted due to conflicting changes.
llvm-svn: 330416
Hopefully, changing set to vector removes nondeterminism detected by
some bots, or the new assert will catch something.
This reverts commit r330180.
llvm-svn: 330403
One more, hopefully the last, bug is fixed: when forming UsesToRewrite
we should ignore phi operands coming from edges that we want to delete.
This reverts r329910.
llvm-svn: 330175
In r312664 (D36404), JumpThreading stopped threading edges into
loop headers. Unfortunately, I observed a significant performance
regression as a result of this change. Upon further investigation,
the problematic pattern looked something like this (after
many high level optimizations):
while (true) {
bool cond = ...;
if (!cond) {
<body>
}
if (cond)
break;
}
Now, naturally we want jump threading to essentially eliminate the
second if check and hook up the edges appropriately. However, the
above mentioned change, prevented it from doing this because it would
have to thread an edge into the loop header.
Upon further investigation, what is happening is that since both branches
are threadable, JumpThreading picks one of them at arbitrarily. In my
case, because of the way that the IR ended up, it tended to pick
the one to the loop header, bailing out immediately after. However,
if it had picked the one to the exit block, everything would have
worked out fine (because the only remaining branch would then be folded,
not thraded which is acceptable).
Thus, to fix this problem, we can simply eliminate loop headers from
consideration as possible threading targets earlier, to make sure that
if there are multiple eligible branches, we can still thread one of
the ones that don't target a loop header.
Patch by Keno Fischer!
Differential Revision: https://reviews.llvm.org/D42260
llvm-svn: 328798
JumpThreading iterates over F until the IR quiesces. Transforming
unreachable BBs increases compile time and it is also possible to
never stabilize causing JumpThreading to hang. An older attempt at
fixing this problem was D3991 where removeUnreachableBlocks(F)
was called before JumpThreading began. This has a few drawbacks:
* expensive - the routine attempts to fix up the IR to identify
additional BBs that can be removed along with unreachable BBs.
* aggressive - does not identify and preserve the shape of the IR.
At a minimum it does not preserve loop hierarchies.
* invasive - altering reachable blocks it may disrupt IR shapes
that could have otherwise been JumpThreaded.
This patch avoids removeUnreachableBlocks(F) and instead tracks
unreachable BBs in a SmallPtrSet using DominatorTree to validate the
initial state of all BBs. We then rely on subsequent passes to identify
and remove these unreachable blocks from F.
Reviewers: dberlin, sebpop, kuhar, dinesh.d
Reviewed by: sebpop, kuhar
Subscribers: hiraditya, uabelho, llvm-commits
Differential Revision: https://reviews.llvm.org/D44177
llvm-svn: 327713
Summary:
It is possible for LVI to encounter instructions that are not in valid
SSA form and reference themselves. One example is the following:
%tmp4 = and i1 %tmp4, undef
Before this patch LVI would recurse until running out of stack memory
and crashed. This patch marks these self-referential instructions as
Overdefined and aborts analysis on the instruction.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33357
Reviewers: craig.topper, anna, efriedma, dberlin, sebpop, kuhar
Reviewed by: dberlin
Subscribers: uabelho, spatel, a.elovikov, fhahn, eli.friedman, mzolotukhin, spop, evandro, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D34135
llvm-svn: 327432
In r263618, JumpThreading learned to look trough simple cast instructions, but
only if the source of those cast instructions was a phi/cmp i1 (in an effort to
limit compile time effects). I think this condition is too restrictive. For
switches with limited value range, InstCombine will readily introduce an extra
trunc instruction to a smaller integer type (e.g. from i8 to i2), leaving us in
the somewhat perverse situation that jump-threading would work before running
instcombine, but not after. Since instcombine produces this pattern, I think we
need to consider it canonical and support it in JumpThreading. In general,
for limiting recursion, I think the existing restriction to phi and cmp nodes
should be sufficient to avoid looking through unprofitable chains of
instructions.
Patch by Keno Fischer!
Differential Revision: https://reviews.llvm.org/D42262
llvm-svn: 327150
Summary:
The LazyValueInfo pass caches a copy of the DominatorTree when available.
Whenever there are pending DominatorTree updates within JumpThreading's
DeferredDominance object we cannot use the cached DT for LVI analysis.
This commit adds the new methods enableDT() and disableDT() to LVI.
JumpThreading also sets the appropriate usage model before calling LVI
analysis methods.
Fixes https://bugs.llvm.org/show_bug.cgi?id=36133
Reviewers: sebpop, dberlin, kuhar
Reviewed by: sebpop, kuhar
Subscribers: uabelho, llvm-commits, aprantl, hiraditya, a.elovikov
Differential Revision: https://reviews.llvm.org/D42717
llvm-svn: 325356
Summary:
This patch attempts to fix the DomTree incremental insertion bug found here [[ https://bugs.llvm.org/show_bug.cgi?id=35969 | PR35969 ]] .
When performing an insertion into a piece of unreachable CFG, we may find the same not at different levels. When this happens, the node can turn out to be affected when we find it starting from a node with a lower level in the tree. The level at which we start visitation affects if we consider a node affected or not.
This patch tracks the lowest level at which each node was visited during insertion and allows it to be visited multiple times, if it can cause it to be considered affected.
Reviewers: brzycki, davide, dberlin, grosser
Reviewed By: brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42231
llvm-svn: 322993
Summary:
See D37528 for a previous (non-deferred) version of this
patch and its description.
Preserves dominance in a deferred manner using a new class
DeferredDominance. This reduces the performance impact of
updating the DominatorTree at every edge insertion and
deletion. A user may call DDT->flush() within JumpThreading
for an up-to-date DT. This patch currently has one flush()
at the end of runImpl() to ensure DT is preserved across
the pass.
LVI is also preserved to help subsequent passes such as
CorrelatedValuePropagation. LVI is simpler to maintain and
is done immediately (not deferred). The code to perform the
preversation was minimally altered and simply marked as
preserved for the PassManager to be informed.
This extends the analysis available to JumpThreading for
future enhancements such as threading across loop headers.
Reviewers: dberlin, kuhar, sebpop
Reviewed By: kuhar, sebpop
Subscribers: mgorny, dmgreen, kuba, rnk, rsmith, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40146
llvm-svn: 322401
stozer