Summary:
In GNU objdump, -w/--wide aligns instructions in the disassembly output.
This patch does the same to llvm-objdump. However, we always use the
wide format (-w/--wide is ignored), because the narrow format
(instructions are misaligned) is probably not very useful.
In llvm-readobj, we made a similar decision: always use the wide format,
accept but ignore -W/--wide.
To save some columns, we change the tab before hex bytes (controlled by
--[no-]show-raw-insn) to a space.
Reviewers: rupprecht, jhenderson, grimar
Reviewed By: jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60376
llvm-svn: 358405
The new value is taken from <mach/machine.h> in the MacOSX10.14 SDK from
Xcode 10.1. Update llvm-objdump and llvm-readobj accordingly.
Differential Revision: https://reviews.llvm.org/D58636
llvm-svn: 357945
The main disassembly loop is hard to read due to special handling of ARM
ELF data & ELF data. Split off the logic into two functions
dumpARMELFData and dumpELFData. Hoist some checks outside of the loop.
--start-address --stop-address have redundant checks and minor off-by-1
issues. Fix them.
llvm-svn: 357869
If the file does not end with a newline, it may be dropped. Fix the
splitting algorithm.
Also delete an unnecessary SourceCache lookup.
llvm-svn: 357858
* Use std::binary_search to replace some std::lower_bound
* Use llvm::upper_bound to replace some std::upper_bound
* Use format_hex and support::endian::read{16,32}
llvm-svn: 357853
Summary:
r354375 added support for most objdump groupings, but didn't add support for -j|--sections, because that wasn't possible.
r354870 added --disassembler options, but grouping still wasn't available.
r355185 supported values for grouped options.
This just puts the three of them together. This supports -j in modes like `-s -j .foo`, `-sj .foo`, `-sj=.foo`, or `-sj.foo`, and similar for `-M`.
Reviewers: ormris, jhenderson, ikudrin
Reviewed By: jhenderson, ikudrin
Subscribers: javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59618
llvm-svn: 356697
Summary:
Before:
```
Dynamic Section:
NEEDED libpthread.so.0
...
NEEDED ld-linux-x86-64.so.2
RPATH 0x00000000001c2e61
```
After:
```
Dynamic Section:
NEEDED libpthread.so.0
...
NEEDED ld-linux-x86-64.so.2
RPATH $ORIGIN/../lib
```
Only a small problem here, I have no idea on choosing test case. I see there's a test
file(test/tools/llvm-objdump/private-headers-dynamic-section.test). But it has no DT_RPATH and DT_RUNPATH tags. Shall I replace the ELF file in the
Inputs dir by a new one?
Reviewers: jhenderson, grimar
Reviewed By: jhenderson
Subscribers: srhines, rupprecht, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58707
llvm-svn: 355001
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
The --disassembler-options, or -M, are used to customize
the disassembler and affect its output.
The two implemented options allow selecting register names on ARM:
* With -Mreg-names-raw, the disassembler uses rNN for all registers.
* With -Mreg-names-std it prints sp, lr and pc for r13, r14 and r15,
which is the default behavior of llvm-objdump.
Differential Revision: https://reviews.llvm.org/D57680
llvm-svn: 354870
- Tests that use multiple short switches now test them grouped and ungrouped.
- Ensure the output of ungrouped and grouped variants is identical
Differential Revision: https://reviews.llvm.org/D57904
llvm-svn: 354375
This is for -D -reloc combination.
With this patch, we do not skip the zero bytes that have a relocation against
them when -reloc is used. If -reloc is not used, then the behavior will be the same.
Differential revision: https://reviews.llvm.org/D58174
llvm-svn: 354319
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`. But I've seen in multiple CLs in LLVM the modernize style
was recommended and code was fixed based on the style, so I added it as
well.)
The common fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
- Use inline initialization for class member variables
- Use `= default` for empty constructors / destructors
- Use `using` in place of `typedef`
Reviewers: sbc100, tlively, aardappel
Subscribers: dschuff, sunfish, jgravelle-google, yurydelendik, kripken, MatzeB, mgorny, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D57500
llvm-svn: 353075
See https://github.com/WebAssembly/tool-conventions/pull/95.
This is less typing and IMHO more readable, and it also fits with
our naming around the binary format which tends to use the short name.
e.g.
include/llvm/BinaryFormat/Wasm.h
tools/llvm-objdump/WasmDump.cpp
etc..
Differential Revision: https://reviews.llvm.org/D57611
llvm-svn: 353062
Summary:
Previously, llvm-nm would report symbols for .debug and .note sections as: '?' with an empty section name:
```
00000000 ?
00000000 ?
...
```
With this patch the output more closely resembles GNU nm:
```
00000000 N .debug_abbrev
00000000 n .note.GNU-stack
...
```
This patch calls `getSectionName` for sections that belong to symbols of type `ELF::STT_SECTION`, which returns the name of the section from the section string table.
Reviewers: Bigcheese, davide, jhenderson
Reviewed By: davide, jhenderson
Subscribers: rupprecht, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57105
llvm-svn: 352785
Seems when committed the r352366
("[llvm-objdump] - Print LMAs when dumping section headers.")
I resolved merge conflict incorrectly and removed this piece by mistake.
Bots did not catch this yet, seems they are slow today,
but the `X86/adjust-vma.test` test case fails locally for me without that.
llvm-svn: 352383
When --section-headers is used, GNU objdump prints both LMA and VMA for sections.
llvm-objdump does not do that what makes it's output be slightly inconsistent.
Patch teaches llvm-objdump to print LMA/VMA for ELF file formats.
The behavior for other formats remains unchanged.
Differential revision: https://reviews.llvm.org/D57146
llvm-svn: 352366
GNU objdump's help says: "--adjust-vma: Add OFFSET to all displayed section addresses"
In real life what it does is a bit more complicated
(and IMO not always reasonable. For example, GNU objdump prints not only VMA, but also LMA
for sections. And with --adjust-vma it adjusts LMA, but only when a section has relocations.
llvm-objsump does not seem to support printing LMAs yet, but GNU's logic anyways does not
make sense for me here).
This patch tries to adjust VMA. I tried to implement a reasonable approach.
I am not adjusting sections that are not allocatable. As, for example, adjusting debug sections
VA's and rel[a] sections VA's should not make sense. This behavior seems to be GNU compatible.
Differential revision: https://reviews.llvm.org/D57051
llvm-svn: 352347
Currently, disassembleObject() is a ~550 lines length function.
This patch splits it into two, where first do all helper objects initializations
and calls the second which does all the rest job.
This is a straightforward split.
Differential revision: https://reviews.llvm.org/D57020
llvm-svn: 351940
Currently disassembleObject() is a ~550 lines length function.
This patch extracts the code that creates a section->their relocation
mapping into a new helper function to simplify/reduce it a bit.
Differential revision: https://reviews.llvm.org/D57019
llvm-svn: 351824
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
`SectionSymbol*` is cast from `void*` to
`std::tuple<uint64_t, StringRef, uint8_t>` in AMDGPUSymbolizer, so it has to
*be* one, not *act like* one.
llvm-svn: 351553
When -all-headers is given it is supposed to dump all headers,
but now it skips the archive headers for no reason.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D56780
llvm-svn: 351547
getRelocationValueString is a dispatcher function that calls the
corresponding ELF/COFF/Wasm/MachO implementations
that currently live in the llvm-objdump.cpp file.
These implementations better be moved to ELFDump.cpp,
COFFDump.cpp and other corresponding files, to move platform specific
implementation out from the common logic.
The patch does that. Also, I had to move ToolSectionFilter helper
and SectionFilterIterator, SectionFilter to a header to make them
available across the objdump code.
Differential revision: https://reviews.llvm.org/D56842
llvm-svn: 351545
Currently llvm-objdump is inconsistent.
When -help is specified it shows no aliases except two.
Aliases are shown with -help-hidden though.
GNU objdump also prints them by default.
This patch does a change to always show all aliases
when -help is given.
Differential revision: https://reviews.llvm.org/D56853
llvm-svn: 351542
Summary:
objdump was interpreting the function header containing the locals
declaration as instructions. To parse these without injecting target
specific code in objdump, MCDisassembler::onSymbolStart was added to
be implemented by the WebAssembly implemention.
WasmObjectFile now returns a code offset for the "address" of a symbol,
rather than the index. This is also more in-line with what other
targets do.
Also ensured that the AsmParser correctly puts each function
in its own segment to enable this test case.
Reviewers: sbc100, dschuff
Subscribers: jgravelle-google, aheejin, sunfish, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D56684
llvm-svn: 351460
This allows it to be used in an upcoming llvm-readobj change.
A small change in internal behaviour of the function is to always call
the microsoftDemangle function if the string does not have an itanium
encoding prefix, rather than only if it starts with '?'. This is
harmless because the microsoftDemangle function does the same check
already.
Reviewed by: grimar, erik.pilkington
Differential Revision: https://reviews.llvm.org/D56721
llvm-svn: 351448
This refactors the getRelocationValueString method.
It is a bit overcomplicated and it is possible to reduce it without
losing the functionality it seems.
Differential revision: https://reviews.llvm.org/D56778
llvm-svn: 351417
Summary:
When running llvm-objdump with the -macho option objdump will by default
disassemble only the __TEXT,__text section (or __TEXT_EXEC,__text when
disassembling MH_KEXT_BUNDLE files). The -disassemble-all option is
treated no diferently than -disassemble.
This change upates llvm-objdump's MachO parsing code to disassemble all
__text sections found in a file when -disassemble-all is specified. This
is useful for disassembling files with more than one __text section, or
when disassembling files whose __text section is not present in __TEXT.
I added a lit test case that verifies "llvm-objdump -m -d" and
"llvm-objdump -m -D" produce the expected results on a reference binary.
I also updated the CommandGuide documentation for llvm-objdump.rst and
verified it renders correctly as man and html.
rdar://42899338
Reviewers: ab, pete, lhames
Reviewed By: lhames
Subscribers: rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D56649
llvm-svn: 351238
This is a cosmetic cleanup for the llvm-objdump code.
This patch:
* Renames things to match the official LLVM code style (lower case -> upper case).
* Removes few obviously excessive variables.
* Moves a few lines closer to the place of use, reorders the code a bit to simplify it,
to avoid doing excessive returns and to avoid using 'else` after returns.
I focused only on a llvm-objdump.h/llvm-objdump.cpp files. Few changes in the
MachODump.cpp and COFFDump.cpp are a result of llvm-objdump.h modification.
Differential revision: https://reviews.llvm.org/D56637
llvm-svn: 351171
In an assert build, the Error gets destroyed and we get "Program aborted
due to an unhandled Error:".
In release, we get an empty message.
llvm-svn: 350848
This is https://bugs.llvm.org/show_bug.cgi?id=26892,
GNU objdump hides the special symbol entry:
SYMBOL TABLE:
000000000000a7e0 l F .text 00000000000003f9 bi_copymodules
while llvm-objdump does not:
SYMBOL TABLE:
0000000000000000 *UND* 00000000
000000000000a7e0 l F .text 000003f9 bi_copymodules
Patch makes the behavior of the llvm-objdump to be consistent with the GNU objdump.
Differential revision: https://reviews.llvm.org/D56076
llvm-svn: 350840
This is https://bugs.llvm.org/show_bug.cgi?id=37151,
GNU objdump spec says that "Normally the disassembly output will skip blocks of zeroes.",
but currently, llvm-objdump prints them.
The patch implements the -z/--disassemble-zeroes option and switches the default to always
skip blocks of zeroes.
Differential revision: https://reviews.llvm.org/D56083
llvm-svn: 350823
When GNU objdump dumps the input with -d it prints the symbol addresses,
for example:
0000000000000031 <foo>:
31: 00 00 add %al,(%rax)
...
llvm-objdump currently does not do that.
Patch changes the behavior to match the GNU objdump.
That is useful for implementing -z/--disassemble-zeroes (D56083),
it allows omitting first zero bytes and keep the information
about the symbol address in the output.
Differential revision: https://reviews.llvm.org/D56123
llvm-svn: 350726
Should fix the http://lab.llvm.org:8011/builders/polly-amd64-linux/builds/25876/steps/build/logs/stdio:
/home/grosser/buildslave/polly-amd64-linux/llvm.src/tools/llvm-objdump/llvm-objdump.cpp:539:25: error: conditional expression is ambiguous; 'std::string' (aka 'basic_string<char>') can be converted to 'typename std::remove_reference<StringRef>::type' (aka 'llvm::StringRef') and vice versa
Target = Demangle ? demangle(*SymName) : *SymName;
llvm-svn: 349617
Summary:
According to `MaskRay`, use `auto` for type inference, according to coding standards.
Delete some comments, because these comments can be easily inferred from codes.
Reviewers: jhenderson, MaskRay
Reviewed By: jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54573
llvm-svn: 346946
Improve compatibility with GNU objdump by showing `O` next to
global symbol names, instead of a blank space.
Patch by Higuoxing (Xing).
Reviewers: MaskRay
Differential Revision: https://reviews.llvm.org/D54380
llvm-svn: 346610
In a lot of places an empty string was passed as the ErrorBanner to
logAllUnhandledErrors. This patch makes that argument optional to
simplify the call sites.
llvm-svn: 346604
This fixes PR39402. The crash was caused when dereferencing nullptr in
DumpObject and printArchiveChild.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D53690
Patch by Xing GUO
llvm-svn: 345503
Changed the format call to match the surrounding code. Previously it was
printing an unsigned int while the return type being printed was
long unsigned int or wider. This caused problems for big-endian systems
which were discovered on mips64.
Also, the printed address had less characters than it should because the
character count was directly obtained from the number of bytes in the
address.
The tests were adapted to fit this fix and now use longer addresses.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D53403
llvm-svn: 344818
When using -g and -dsym, llvm-objdump opens the dsym file and keeps the
MachOObjectFile alive, while the memory buffer that the MachOObjectFile
was based on gets destroyed.
Differential Revision: https://reviews.llvm.org/D51365
llvm-svn: 341209
LLVM triple normalization is handling "unknown" and empty components
differently; for example given "x86_64-unknown-linux-gnu" and
"x86_64-linux-gnu" which should be equivalent, triple normalization
returns "x86_64-unknown-linux-gnu" and "x86_64--linux-gnu". autoconf's
config.sub returns "x86_64-unknown-linux-gnu" for both
"x86_64-linux-gnu" and "x86_64-unknown-linux-gnu". This changes the
triple normalization to behave the same way, replacing empty triple
components with "unknown".
This addresses PR37129.
Differential Revision: https://reviews.llvm.org/D50219
llvm-svn: 339294
Summary:
With Mach-O, there is a flag requirement discrepancy between working with
universal binaries and thin binaries. Many flags that don't require the `-macho`
flag (for example `-private-headers` and `-disassemble`) fail to work on
universal binaries unless `-macho` is given. When this happens, the error
message is unhelpful, stating:
The file was not recognized as a valid object file.
Which can lead to confusion.
This change allows generic flags to be used on universal binaries with and
without the `-macho` flag. This means flags that can be used for thin files can
be used consistently with fat files too.
To do this, the universal binary support within `ParseInputMachO()` is extracted
into a new function. This new function is called directly from `DumpInput()`
when the input binary is universal. Additionally the `-arch` flag validation in
`ParseInputMachO()` was extracted to be reused.
Reviewers: compnerd
Reviewed By: compnerd
Subscribers: keith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48702
llvm-svn: 338792
The standard library functions ::isprint/std::isprint have platform-
and locale-dependent behavior which makes LLVM's output less
predictable. In particular, regression tests my fail depending on the
implementation of these functions.
Implement llvm::isPrint in StringExtras.h with a standard behavior and
replace all uses of ::isprint/std::isprint by a call it llvm::isPrint.
The function is inlined and does not look up language settings so it
should perform better than the standard library's version.
Such a replacement has already been done for isdigit, isalpha, isxdigit
in r314883. gtest does the same in gtest-printers.cc using the following
justification:
// Returns true if c is a printable ASCII character. We test the
// value of c directly instead of calling isprint(), which is buggy on
// Windows Mobile.
inline bool IsPrintableAscii(wchar_t c) {
return 0x20 <= c && c <= 0x7E;
}
Similar issues have also been encountered by Julia:
https://github.com/JuliaLang/julia/issues/7416
I noticed the problem myself when on Windows isprint('\t') started to
evaluate to true (see https://stackoverflow.com/questions/51435249) and
thus caused several unit tests to fail. The result of isprint doesn't
seem to be well-defined even for ASCII characters. Therefore I suggest
to replace isprint by a platform-independent version.
Differential Revision: https://reviews.llvm.org/D49680
llvm-svn: 338034
Imagine we have a file with few sections, and one of them is .foo
with index N != 0.
Problem is that when llvm-objdump is given a -section=.foo parameter
it lists .foo as a section at index 0. That makes impossible to write
test cases which needs to find the index of the particular section,
while ignoring dumping of others.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D49372
llvm-svn: 337361
Summary:
Add support for two additional ObjC image info flags: `IS_SIMULATED` and
`HAS_CATEGORY_CLASS_PROPERTIES`.
`IS_SIMULATED` indicates a Mach-O binary built for iOS simulator.
`HAS_CATEGORY_CLASS_PROPERTIES` indicates a Mach-O binary built by a compiler
that supports class properties in categories.
Reviewers: enderby, compnerd
Reviewed By: compnerd
Subscribers: keith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48568
llvm-svn: 336411
Summary:
Add support for two additional ObjC image info flags: `IS_SIMULATED` and
`HAS_CATEGORY_CLASS_PROPERTIES`.
`IS_SIMULATED` indicates a Mach-O binary built for iOS simulator.
`HAS_CATEGORY_CLASS_PROPERTIES` indicates a Mach-O binary built by a compiler
that supports class properties in categories.
Reviewers: enderby, compnerd
Reviewed By: compnerd
Subscribers: keith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48568
llvm-svn: 336399
Summary:
"Unknown" for platforms that were not manually added into the switch
did not make sense at all. Now it prints Target + addend for all
elf-machines that were not explicitly mentioned.
Addresses PR21059 and PR25124.
Original author: fedor.sergeev
Reviewers: jyknight, espindola, fedor.sergeev
Reviewed By: jyknight
Subscribers: eraman, dcederman, jfb, dschuff, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D36464
llvm-svn: 333726
Change relocation output so that relocation information follows
individual instructions rather than clustering them at the end
of packets.
This change required shifting block of code but the actual change
is in HexagonPrettyPrinter's PrintInst.
Differential Revision: https://reviews.llvm.org/D46728
llvm-svn: 332283
This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
llvm-svn: 331275
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
When disassembling with -D, skip virtual sections by printing "..." for
each symbol.
This patch also implements `MachOObjectFile::isSectionVirtual`.
Test case comes from:
```
.zerofill __DATA,__common,_data64unsigned,472,3
```
Differential Revision: https://reviews.llvm.org/D45824
llvm-svn: 330342
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: JDevlieghere, zturner, echristo, dberris, friss
Reviewed By: echristo
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D45141
llvm-svn: 328943
Summary:
llvm-objdump now disassembles unrecognised opcodes as data, using
the .long directive. We treat unrecognised opcodes as being 32 bit
values, so move along 4 bytes rather than the single byte which
previously resulted in a cascade of bogus disassembly following an
unrecognised opcode.
While no solution can always disassemble code that contains
embedded data correctly this provides a significant improvement.
The disassembler will now cope with an arbitrary length section
as it no longer truncates it to a multiple of 4 bytes, and will
use the .byte directive for trailing bytes.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D44685
llvm-svn: 328553
term sections from .o files to look to see if the pointers have a relocation
entry and if so print the symbol name from the relocation entry. If not fall
back to the existing code and use the pointer value to look up that value
in the symbol table.
rdar://38337506
llvm-svn: 328037
Summary:
Add a new option -df to llvm-objdump that takes function names
as arguments and instructs the disassembler to only dump those function
contents. Based on code originally written by Bill Nell.
Reviewers: espindola, JDevlieghere
Differential Revision: https://reviews.llvm.org/D44224
llvm-svn: 327164
from core files. I tested this against the couple of core files that were
getting errors about unknown thread flavors and it now produce the same output as
the Xcode otool-classic(1) tool. Since the core files are huge I didn’t include
them as test cases.
rdar://38216356
llvm-svn: 327077
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
The change implements constructor of DisassembleInfo to avoid duplication
of initialization code and gets rid of malloc/free where possible.
Differential Revision: https://reviews.llvm.org/D43003
llvm-svn: 325098
from the value stored in swift_version bits in the flags field in the
objc_image_info struct. ABI version 3 thru 6 were previously added but this
code was not updated to print the Swift version.
rdar://35624067
llvm-svn: 324767
We were a bit too trusting about the offsets encoded in MachO compact unwind
sections, so this passes every access through a bounds check just in case. It
prevents a few segfaults on malformed object files, if one should ever come
along.
Mostly to silence fuzzers in the vague hope they might be able to produce
something useful without the noise.
llvm-svn: 323198
Summary:
llvm-objdump's Mach-O parser was updated in r306037 to display external
relocations for MH_KEXT_BUNDLE file types. This change extends the Macho-O
parser to display local relocations for MH_PRELOAD files. When used with
the -macho option relocations will be displayed in a historical format.
All tests are passing for llvm, clang, and lld. llvm-objdump builds without
compiler warnings.
rdar://35778019
Reviewers: enderby
Reviewed By: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41199
llvm-svn: 320832
Summary:
llvm-objdump's Mach-O parser was updated in r306037 to display external
relocations for MH_KEXT_BUNDLE file types. This change extends the Macho-O
parser to display local relocations for MH_PRELOAD files. When used with
the -macho option relocations will be displayed in a historical format.
rdar://35778019
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41061
llvm-svn: 320532
Summary:
llvm-objdump's Mach-O parser was updated in r306037 to display external
relocations for MH_KEXT_BUNDLE file types. This change extends the Macho-O
parser to display local relocations for MH_PRELOAD files. When used with
the -macho option relocations will be displayed in a historical format.
rdar://35778019
Reviewers: enderby
Reviewed By: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40867
llvm-svn: 320166
We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
llvm-svn: 319840
The LLVM tools can be used as a replacement for binutils, in which case
it's convenient to create symlinks with the binutils names. Add support
for these symlinks in the build system. As with any other llvm tool
symlinks, the user can limit the installed symlinks by only adding the
desired ones to `LLVM_TOOLCHAIN_TOOLS`.
Differential Revision: https://reviews.llvm.org/D39530
llvm-svn: 317272
Summary:
xar_open and xar_iter_new require manual calls to close/free functions
to deallocate resources. This makes it easy to introduce memory leaks,
so add RAII struct wrappers for these resources.
Reviewers: enderby, rafael, compnerd, lhames, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38598
llvm-svn: 315069
in the second slice of a Mach-O universal file.
The code in llvm-objdump in in DisassembleMachO() was getting the default
CPU then incorrectly setting into the global variable used for the -mcpu option
if that was not set. This caused a second call to DisassembleMachO() to use
the wrong default CPU when disassembling the next slice in a Mach-O universal
file. And would result in bad disassembly and an error message about an
recognized processor for the target:
% llvm-objdump -d -m -arch all fat.macho-armv7s-arm64
fat.macho-armv7s-arm64 (architecture armv7s):
(__TEXT,__text) section
armv7:
0: 60 47 bx r12
fat.macho-armv7s-arm64 (architecture arm64):
'cortex-a7' is not a recognized processor for this target (ignoring processor)
'cortex-a7' is not a recognized processor for this target (ignoring processor)
(__TEXT,__text) section
___multc3:
0: .long 0x1e620810
rdar://34439149
llvm-svn: 313921
Move logic that allows for Triple deduction from an ObjectFile object
out of llvm-objdump.cpp into a public factory, found in the ObjectFile
class.
This should allow other tools in the future to use this logic without
reimplementation.
Patch by Mitch Phillips
Differential Revision: https://reviews.llvm.org/D37719
llvm-svn: 313605
This patch makes the `.eh_frame` extension an alias for `.debug_frame`.
Up till now it was only possible to dump the section using objdump, but
not with dwarfdump. Since the two are essentially interchangeable, we
dump whichever of the two is present.
As a workaround, this patch also adds parsing for 3 currently
unimplemented CFA instructions: `DW_CFA_def_cfa_expression`,
`DW_CFA_expression`, and `DW_CFA_val_expression`. Because I lack the
required knowledge, I just parse the fields without actually creating
the instructions.
Finally, this also fixes the typo in the `.debug_frame` section name
which incorrectly contained a trailing `s`.
Differential revision: https://reviews.llvm.org/D37852
llvm-svn: 313530
Summary: Detected by LeakSanitizer for Darwin
Reviewers: enderby, rafael
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37750
llvm-svn: 313146
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
llvm-svn: 312970
Fangrui Song