This patch is mechanically generated by clang-llvm-rename tool that I wrote
using Clang Refactoring Engine just for creating this patch. You can see the
source code of the tool at https://reviews.llvm.org/D64123. There's no manual
post-processing; you can generate the same patch by re-running the tool against
lld's code base.
Here is the main discussion thread to change the LLVM coding style:
https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html
In the discussion thread, I proposed we use lld as a testbed for variable
naming scheme change, and this patch does that.
I chose to rename variables so that they are in camelCase, just because that
is a minimal change to make variables to start with a lowercase letter.
Note to downstream patch maintainers: if you are maintaining a downstream lld
repo, just rebasing ahead of this commit would cause massive merge conflicts
because this patch essentially changes every line in the lld subdirectory. But
there's a remedy.
clang-llvm-rename tool is a batch tool, so you can rename variables in your
downstream repo with the tool. Given that, here is how to rebase your repo to
a commit after the mass renaming:
1. rebase to the commit just before the mass variable renaming,
2. apply the tool to your downstream repo to mass-rename variables locally, and
3. rebase again to the head.
Most changes made by the tool should be identical for a downstream repo and
for the head, so at the step 3, almost all changes should be merged and
disappear. I'd expect that there would be some lines that you need to merge by
hand, but that shouldn't be too many.
Differential Revision: https://reviews.llvm.org/D64121
llvm-svn: 365595
We create several types of synthetic sections for loadable partitions, including:
- The dynamic symbol table. This allows code outside of the loadable partitions
to find entry points with dlsym.
- Creating a dynamic symbol table also requires the creation of several other
synthetic sections for the partition, such as the dynamic table and hash table
sections.
- The partition's ELF header is represented as a synthetic section in the
combined output file, and will be used by llvm-objcopy to extract partitions.
Differential Revision: https://reviews.llvm.org/D62350
llvm-svn: 362819
We currently (ab)use the Live bit on output sections to track whether
the section has ever had an input section added to it, and then later
use it during orphan placement. This will conflict with one of my upcoming
partition-related changes that will assign all output sections to a partition
(thus marking them as live) so that they can be added to the correct segment
by the code that creates program headers.
Instead of using the Live bit for this purpose, create a new flag and
start using it to track the property explicitly.
Differential Revision: https://reviews.llvm.org/D62348
llvm-svn: 362444
Fixes the remaining issue of PR41673 after D61186: with `/DISCARD/ { ... } :NONE`,
we may create an output section named `/DISCARD/`.
Note, if an input section is named `/DISCARD/`, ld.bfd discards it but
lld keeps it. It is probably not worth copying this behavior as it is unrealistic.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62768
llvm-svn: 362356
This change causes us to read partition specifications from partition
specification sections and split output sections into partitions according
to their reachability from partition entry points.
This is only the first step towards a full implementation of partitions. Later
changes will add additional synthetic sections to each partition so that
they can be loaded independently.
Differential Revision: https://reviews.llvm.org/D60353
llvm-svn: 361925
My recent commits separated symbol resolution from the symbol table,
so the functions to resolve symbols are now in a somewhat wrong file.
This patch moves it to Symbols.cpp.
The functions are now member functions of the symbol.
This is code move change. I modified function names so that they are
appropriate as member functions, though. No functionality change
intended.
Differential Revision: https://reviews.llvm.org/D62290
llvm-svn: 361474
For memory5.test, ld.bfd appears to ignore `. += 0x2000;`, so the test was testing
a wrong behavior. After deleting the code added in rLLD336335, we match ld.bfd and thus fix PR41357.
PR37836 (memory4.test) seems to have been fixed by another change.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62177
llvm-svn: 361228
This is a mechanical rewrite of replaceSymbol(A, B) to A->replace(B).
I also added a comment to Symbol::replace().
Technically this change is not necessary, but this change makes code a
bit more concise.
Differential Revision: https://reviews.llvm.org/D62117
llvm-svn: 361123
This is the last patch of the series of patches to make it possible to
resolve symbols without asking SymbolTable to do so.
The main point of this patch is the introduction of
`elf::resolveSymbol(Symbol *Old, Symbol *New)`. That function resolves
or merges given symbols by examining symbol types and call
replaceSymbol (which memcpy's New to Old) if necessary.
With the new function, we have now separated symbol resolution from
symbol lookup. If you already have a Symbol pointer, you can directly
resolve the symbol without asking SymbolTable to do that.
Now that the nice abstraction become available, I can start working on
performance improvement of the linker. As a starter, I'm thinking of
making --{start,end}-lib faster.
--{start,end}-lib is currently unnecessarily slow because it looks up
the symbol table twice for each symbol.
- The first hash table lookup/insertion occurs when we instantiate a
LazyObject file to insert LazyObject symbols.
- The second hash table lookup/insertion occurs when we create an
ObjFile from LazyObject file. That overwrites LazyObject symbols
with Defined symbols.
I think it is not too hard to see how we can now eliminate the second
hash table lookup. We can keep LazyObject symbols in Step 1, and then
call elf::resolveSymbol() to do Step 2.
Differential Revision: https://reviews.llvm.org/D61898
llvm-svn: 360975
Previously, we handled common symbols as a kind of Defined symbol,
but what we were doing for common symbols is pretty different from
regular defined symbols.
Common symbol and defined symbol are probably as different as shared
symbol and defined symbols are different.
This patch introduces CommonSymbol to represent common symbols.
After symbols are resolved, they are converted to Defined symbols
residing in a .bss section.
Differential Revision: https://reviews.llvm.org/D61895
llvm-svn: 360841
SymbolTable's add-family functions have lots of parameters because
when they have to create a new symbol, they forward given arguments
to Symbol's constructors. Therefore, the functions take at least as
many arguments as their corresponding constructors.
This patch simplifies the add-family functions. Now, the functions
take a symbol instead of arguments to construct a symbol. If there's
no existing symbol, a given symbol is memcpy'ed to the symbol table.
Otherwise, the functions attempt to merge the existing and a given
new symbol.
I also eliminated `CanOmitFromDynSym` parameter, so that the functions
take really one argument.
Symbol classes are trivially constructible, so looks like constructing
them to pass to add-family functions is as cheap as passing a lot of
arguments to the functions. A quick benchmark showed that this patch
seems performance-neutral.
This is a preparation for
http://lists.llvm.org/pipermail/llvm-dev/2019-April/131902.html
Differential Revision: https://reviews.llvm.org/D61855
llvm-svn: 360838
The -n (--nmagic) disables page alignment, and acts as a -Bstatic
The -N (--omagic) does what -n does but also marks the executable segment as
writeable. As page alignment is disabled headers are not allocated unless
explicit in the linker script.
To disable page alignment in LLD we choose to set the page sizes to 1 so
that any alignment based on the page size does nothing. To set the
Target->PageSize to 1 we implement -z common-page-size, which has the side
effect of allowing the user to set the value as well.
Setting the page alignments to 1 does mean that any use of
CONSTANT(MAXPAGESIZE) or CONSTANT(COMMONPAGESIZE) in a linker script will
return 1, unlike in ld.bfd. However given that -n and -N disable paging
these probably shouldn't be used in a linker script where -n or -N is in
use.
Differential Revision: https://reviews.llvm.org/D61688
llvm-svn: 360593
/DISCARD/ output sections were being treated as orphans. As a result, if
a /DISCARD/ output section has been assigned a PHDR, it could cause
incorrect assignment of sections to segments.
Differential Revision: https://reviews.llvm.org/D61186
llvm-svn: 359565
This is https://bugs.llvm.org//show_bug.cgi?id=38750.
If script references empty sections in LOADADDR/ADDR commands
.empty : { *(.empty ) }
.text : AT(LOADADDR (.empty) + SIZEOF (.empty)) { *(.text) }
then an empty section will be removed and LOADADDR/ADDR will evaluate to null.
It is not that user may expect from using of the generic script, what is a common case.
Differential revision: https://reviews.llvm.org/D54621
llvm-svn: 359279
This fixes an issue where a symbol only section at the start of a
PT_LOAD segment, causes incorrect alignment of the file offset for the
start of the segment which results in the output of an invalid ELF.
SHT_PROGBITS was the default output section type in the past.
Differential Revision: https://reviews.llvm.org/D60131
llvm-svn: 358981
Make some small adjustment while touching the code: make parameters
const, use less_first(), etc.
Differential Revision: https://reviews.llvm.org/D60989
llvm-svn: 358943
Summary:
If the output section contains only symbol assignments, we copy flags
from the previous sections. Don't set SHF_ALLOC if NonAlloc is true.
We also have to change the type from SHT_NOBITS to SHT_PROGBITS.
In ld.bfd, bfd_elf_get_default_section_type maps non-alloctable sections to SHT_PROGBITS.
Non-alloctable SHT_NOBITS sections do not make sense.
Fixes PR38626
Differential Revision: https://reviews.llvm.org/D59986
llvm-svn: 358650
Patch by Gabriel Smith.
The address for a section would be evaluated before the region was
switched to. Because of this, the position within the region would not
be updated. After the region is swapped to the dot would be set to the
out of date position within the region, undoing the section address
evaluation.
To fix this, the region is swapped to before the section's address is
evaluated. As part of the fallout of this, expandMemoryRegions needed
to be gated in setDot on the condition that the evaluated address is
less than the dot. This is for the case where sections are not listed
from lowest address to highest address.
Finally, a test for the case where sections are listed "out of order"
was added.
Differential Revision: https://reviews.llvm.org/D60744
llvm-svn: 358638
We don't need to take a slice of SectionCommands in addOrphanSections()
because it is not modified until the end of the function.
Differential Revision: https://reviews.llvm.org/D59239
llvm-svn: 355954
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
When linking the linux kernel on ppc64le
ld.lld -EL -m elf64lppc -Bstatic --orphan-handling=warn --build-id -o
.tmp_vmlinux1 -T ./arch/powerpc/kernel/vmlinux.lds --whole-archive
built-in.a --no-whole-archive --start-group lib/lib.a --end-group
ld.lld: error: discarding .rela.plt section is not allowed
The linker script discards with the following matches
*(.glink .iplt .plt .rela* .comment)
Differential Revision: https://reviews.llvm.org/D54871
llvm-svn: 348258
`Type` parameter was used only to check for TLS attribute mismatch,
but we can do that when we actually replace symbols, so we don't need
to type as an argument. This change should simplify the interface of
the symbol table a bit.
llvm-svn: 344394
Previously, if you invoke lld's `main` more than once in the same process,
the second invocation could fail or produce a wrong result due to a stale
pointer values of the previous run.
Differential Revision: https://reviews.llvm.org/D52506
llvm-svn: 343009
These symbols are declared early with the same value, so they otherwise
appear identical to ICF.
Differential Revision: https://reviews.llvm.org/D51376
llvm-svn: 340998
Some parts of the code changed are a bit old. I found traces in 2016.
Initiall commits has test cases and perhaps reasonable comments.
For example, we had segfaults earlier and had the code to fix them.
Now, in 2018, I think it is excessive to have these parts, because
we do not have segfaults and our code was changed a lot (softly saying).
I reviewed the current sources and I think that at this point of the
execution flow, we should never face with
the conditions checked and so I removing them in this patch.
This helps to cleanup the code.
llvm-svn: 339003
Patch by Konstantin Schwarz!
If more than a single output section is added to a PT_LOAD header,
only the first section should set the LMAOffset of the segment.
Otherwise, we get a load-address overlap error
Differential revision: https://reviews.llvm.org/D50133
llvm-svn: 338697
Patch by Konstantin Schwarz!
If both the MemRegion and LMARegion are set for an output section in
a linker script, we should only increase the LMARegion if it is
different from the MemRegion. Otherwise, we reserve the memory twice.
Differential revision: https://reviews.llvm.org/D50065
llvm-svn: 338684
Patch by Rahul Chaudhry!
This change adds experimental support for SHT_RELR sections, proposed
here: https://groups.google.com/forum/#!topic/generic-abi/bX460iggiKg
Pass '--pack-dyn-relocs=relr' to enable generation of SHT_RELR section
and DT_RELR, DT_RELRSZ, and DT_RELRENT dynamic tags.
Definitions for the new ELF section type and dynamic array tags, as well
as the encoding used in the new section are all under discussion and are
subject to change. Use with caution!
Pass '--use-android-relr-tags' with '--pack-dyn-relocs=relr' to use
SHT_ANDROID_RELR section type instead of SHT_RELR, as well as
DT_ANDROID_RELR* dynamic tags instead of DT_RELR*. The generated
section contents are identical.
'--pack-dyn-relocs=android+relr --use-android-relr-tags' enables both
'--pack-dyn-relocs=android' and '--pack-dyn-relocs=relr': lld will
encode the relative relocations in a SHT_ANDROID_RELR section, and pack
the rest of the dynamic relocations in a SHT_ANDROID_REL(A) section.
Differential Revision: https://reviews.llvm.org/D48247
llvm-svn: 336594
We call switchTo() from assignAddresses() for switching to Aether,
and from assignOffsets().
First calls assignOffsets() one by one for each output section.
(https://github.com/llvm-mirror/lld/blob/master/ELF/LinkerScript.cpp#L1045)
That I believe means the condition removed in this patch is dead.
llvm-svn: 336356
Currently, there are only OutputSection and SymbolAssignment
commands possible at the first level under SECTIONS tag.
Hence, dyn_cast was excessive.
llvm-svn: 336354
This is https://bugs.llvm.org//show_bug.cgi?id=37836
Previously LLD could assign to Dot or set the address
for the section with address expression but did not advance
the position in a memory region.
Patch fixes the issue.
llvm-svn: 336335
LLD removes empty output sections otherwise specified in the linker
script. Prior to this change however, if section descriptions included
ANY kind of symbol assignment, then the consequent output section would
not be removed, even if the assignment was marked with PROVIDE and not
actually triggered (i.e. the symbol was never referenced). This change
modifies the isDiscarable function to ignore such directives when
determining whether a section should be discarded, in keeping with
bfd's behaviour. Symbol assignments that do result in a symbol
definition will continue to result in a kept section (this is not
actually the same as bfd's behaviour, but it is simpler, and probably
makes more sense).
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D48771
llvm-svn: 336184
Patch by Mark Kettenis.
Make ALIGN work in linker scripts used with the -r option. This works in
GNU ld (ld.bfd) and is used to generate the "random gap" object for
linking the OpenBSD kernel.
Differential Revision: https://reviews.llvm.org/D46839
llvm-svn: 332656
This is slightly simpler to read IMHO. Now if a symbol has a position
in the file, it is Defined.
The main motivation is that with this a SharedSymbol doesn't need a
section, which reduces the size of SymbolUnion.
With this the peak allocation when linking chromium goes from 568.1 to
564.2 MB.
llvm-svn: 330966
Currently, LLD supports ASSERT as a separate command.
We support two forms now.
Assign expression-form: . = ASSERT(0x100)
(old GNU ld required it and some scripts in the wild are still using
something like . = ASSERT((_end - _text <= (512 * 1024 * 1024)), "kernel image bigger than KERNEL_IMAGE_SIZE");
Nowadays above is not a mandatory form and command-like form is commonly used:
ASSERT(<expr>, "text);
The return value of the ASSERT is Dot. That was implemented in D30171.
It looks like (2) is just a short version of (1) then.
GNU ld does *not* list ASSERT as a SECTIONS command:
https://sourceware.org/binutils/docs/ld/SECTIONS.html#SECTIONS
Given above we probably can change ASSERT to be an assignment to Dot.
That makes the rest of the code much simpler. Patch do that.
Differential revision: https://reviews.llvm.org/D45434
llvm-svn: 330814
Currently LLD sets OutSecOff in addSection for input sections.
That is a fake offset (just a rude approximation to remember the order),
used for sorting SHF_LINK_ORDER sections
(see resolveShfLinkOrder, compareByFilePosition).
There are 2 problems with such approach:
1. We currently change and reuse Size field as a value assigned. Changing size is
not good because leads to bugs. Currently, SIZEOF(.bss) for empty .bss returns 2
because we add two empty synthetic sections and increase size twice by 1.
(See PR37011: https://bugs.llvm.org/show_bug.cgi?id=37011)
2. Such approach simply does not work when --symbol-ordering-file is involved,
because processing of the ordering file might break the initial section order.
This fixes PR37011.
Differential revision: https://reviews.llvm.org/D45368
llvm-svn: 329560
Currently, LLD print symbol assignment commands to the map file,
but it does not do that for assignments that are outside of the section
descriptions. Such assignments can affect the layout though.
The patch implements the following:
* Teaches LLD to print symbol assignments outside of section declaration.
* Teaches LLD to print PROVIDE/HIDDEN/PROVIDE hidden commands.
In case when symbol is not provided, nothing will be printed.
Differential revision: https://reviews.llvm.org/D44894
llvm-svn: 329272
Currently, we might have a bug with scripts like below:
.foo : ALIGN(8)
{
*(.foo)
} > ram
because do not expand the memory region when doing ALIGN.
This might result in file range overlaps. The patch fixes the issue.
Differential revision: https://reviews.llvm.org/D44730
llvm-svn: 328479
Currently when we build input sections list in linker script
we ignore all rel[a] sections. That was done to support
scripts like .rela.dyn : { *(.rela.data) } for emit relocs.
Though as a result following scripts were also silently ignored:
/DISCARD/ : { *(.rela.plt)
/DISCARD/ : { *(.rela.dyn)
and we produced output with this sections. That is not ideal.
The solution this patch suggests is simple: do not ignore synthetic
rel[a] sections. That way we can enable common discarding logic
for them and report a proper error.
Differential revision: https://reviews.llvm.org/D41640
llvm-svn: 328419
This fixes PR36367 which is about segfault when --emit-relocs is
used together with .eh_frame sections which happens because
of reordering of regular and .rel[a] sections.
Path changes loop that iterates over input sections to create
relocation target sections first.
Differential revision: https://reviews.llvm.org/D44679
llvm-svn: 328299
Patch teaches LLD to print BYTE/SHORT/LONG/QUAD and
location move commands to the map file.
Differential revision: https://reviews.llvm.org/D44004
llvm-svn: 327612
This finishes PR35877.
INSERT BEFORE used similar to INSERT AFTER,
it inserts sections before the given target section.
Differential revision: https://reviews.llvm.org/D44380
llvm-svn: 327378
This fixes PR36598.
LLD currently crashes when we have empty output section
with SHF_LINK_ORDER flag. This might happen if we place an
empty synthetic section in the linker script, but keep output
section alive with the use of additional symbol, for example.
The patch fixes the issue by dropping all special flags
for empty sections.
Differential revision: https://reviews.llvm.org/D44376
llvm-svn: 327374
This implements INSERT AFTER in a following way:
During reading scripts it collects all insert statements.
After we done and read all files it inserts statements into script commands list.
With that:
* Rest of code does know nothing about INSERT.
* Approach is straightforward and have no visible limitations.
* It is also easy to support INSERT BEFORE (was seen in clang code once).
* Should work for PR35877 and similar cases.
Cons:
* It assumes we have "main" scripts that describes sections.
Differential revision: https://reviews.llvm.org/D43468
llvm-svn: 327003
With fix: add missing "RUN:" prefix to test case.
Original commit message:
We do not report LMA region overflows currently.
Both GNU linkers do that. The patch implements it.
Differential revision: https://reviews.llvm.org/D44094
llvm-svn: 326895
We do not report LMA region overflows currently.
Both GNU linkers do that. The patch implements it.
Differential revision: https://reviews.llvm.org/D44094
llvm-svn: 326892
Currently, LLD segfaults when linker script attempts to discard
one of the hash sections. This patch fixes that.
Differential revision: https://reviews.llvm.org/D44012
llvm-svn: 326891
We do not expand memory region correctly for following scripts:
.foo.1 :
{
*(.foo.1)
. += 0x1000;
} > ram
Patch generalizes expanding of output sections and memory
regions in one place and fixes the issue.
Differential revision: https://reviews.llvm.org/D43999
llvm-svn: 326688
LLD can not catch a memory area overflow when using a data command.
If we have the script below:
.foo :
{
*(.foo)
BYTE(0x1)
} > ram
where BYTE overflows the ram region, we do not report it currently.
Patch fixes that.
Differential revision: https://reviews.llvm.org/D43948
llvm-svn: 326545
With the current code if the script has a PHDRS we always obey and try
to allocate a header. This can cause Min - HeaderSize to underflow.
It looks like bfd actually prints an error for this case. With this
patch we do the same.
Found while looking at pr36515.
llvm-svn: 326441
This is PR36515.
Currenly if we have a script like .debug_info 0 : { *(.debug_info) },
we would not remove this section and keep it in the output.
That does not work, because it is common case for
debug sections to have a zero address expression.
Patch changes behavior so that we remove only sections
that do not use symbols in its expressions.
Differential revision: https://reviews.llvm.org/D43863
llvm-svn: 326430
This should resolve the issue that lld build fails in some hosts
that uses case-insensitive file system.
Differential Revision: https://reviews.llvm.org/D43788
llvm-svn: 326339
We should process symbols inside output section declarations the same way as top-level ones.
Differential Revision: https://reviews.llvm.org/D43008
llvm-svn: 326305
It should be possible to resolve undefined symbols in dynamic libraries
using symbols defined in a linker script.
Differential Revision: https://reviews.llvm.org/D43011
llvm-svn: 326176
This fixes pr36475.
I think this code can be simplified a bit, but I would like to check
in the more direct fix if we are in agreement on the direction and
then refactor.
This is not something that bfd does. The issue is not noticed in bfd
because it keeps fewer sections from the linkerscript in the output.
The reasons why it seems reasonable to do this:
- As George noticed, we would still keep the flags if the output
section had both an empty synthetic section and a regular section
- We need an heuristic to find the flags of output sections. Using the
flags of a synthetic section that would have been there seems a
reasonable heuristic.
llvm-svn: 326137
This continues direction started in D43069.
We can keep sections that are explicitly assigned to segment in script.
It helps to simplify code.
Differential revision: https://reviews.llvm.org/D43571
llvm-svn: 325887
This is for fixing PR36297.
Issue itself is that if we have SECTIONS { .bar (a+b) : { *(.stub) } };
script and no section .stub, when LLD will remove .bar, but
produce output with undefined symbols a and b.
Differential revision: https://reviews.llvm.org/D43069
llvm-svn: 325875
Previously --defsym=foo2=etext+2 would produce incorrect value
for foo2 because expressions did not work correctly with
reserved symbols, section offset was calculated wrong for them.
Fixes PR35744.
Differential revision: https://reviews.llvm.org/D42911
llvm-svn: 324461
Currently symbols assigned or created by linkerscript are not processed early
enough. As a result it is not possible to version them or assign any other flags/properties.
Patch creates Defined symbols for -defsym and linkerscript symbols early,
so that issue from above can be addressed.
It is based on Rafael Espindola's version of D38239 patch.
Fixes PR34121.
Differential revision: https://reviews.llvm.org/D41987
llvm-svn: 323729
If two sections are in the same PT_LOAD, their relatives offsets,
virtual address and physical addresses are all the same.
I initially wanted to have a single global LMAOffset, on the
assumption that every ELF file was in practiced loaded contiguously in
both physical and virtual memory.
Unfortunately that is not the case. The linux kernel has:
LOAD 0x200000 0xffffffff81000000 0x0000000001000000 0xced000 0xced000 R E 0x200000
LOAD 0x1000000 0xffffffff81e00000 0x0000000001e00000 0x15f000 0x15f000 RW 0x200000
LOAD 0x1200000 0x0000000000000000 0x0000000001f5f000 0x01b198 0x01b198 RW 0x200000
LOAD 0x137b000 0xffffffff81f7b000 0x0000000001f7b000 0x116000 0x1ec000 RWE 0x200000
The delta for all but the third PT_LOAD is the same:
0xffffffff80000000. I think the 3rd one is a hack for implementing per
cpu data, but we can't break that.
llvm-svn: 323456
This fixes the crash reported at PR36083.
The issue is that we were trying to put all the sections in the same
PT_LOAD and crashing trying to write past the end of the file.
This also adds accounting for used space in LMARegion, without it all
3 PT_LOADs would have the same physical address.
llvm-svn: 323449
When a section placement (AT) command references the section itself,
the physical address of the section in the ELF header was calculated
incorrectly due to alignment happening right after the location
pointer's value was captured.
The problem was diagnosed and the first version of the patch written
by Erick Reyes.
llvm-svn: 322421
AT> lma_region expression allows to specify the memory region
for section load address.
Should fix PR35684.
Differential revision: https://reviews.llvm.org/D41397
llvm-svn: 322359
Previously, in r320472, I moved the calculation of section offsets and sizes
for compressed debug sections into maybeCompress, which happens before
assignAddresses, so that the compression had the required information. However,
I failed to take account of relocations that patch such sections. This had two
effects:
1. A race condition existed when a debug section referred to a different debug
section (see PR35788).
2. References to symbols in non-debug sections would be patched incorrectly.
This is because the addresses of such symbols are not calculated until after
assignAddresses (this was a partial regression caused by r320472, but they
could still have been broken before, in the event that a custom layout was used
in a linker script).
assignAddresses does not need to know about the output section size of
non-allocatable sections, because they do not affect the value of Dot. This
means that there is no longer a reason not to support custom layout of
compressed debug sections, as far as I'm aware. These two points allow for
delaying when maybeCompress can be called, removing the need for the loop I
previously added to calculate the section size, and therefore the race
condition. Furthermore, by delaying, we fix the issues of relocations getting
incorrect symbol values, because they have now all been finalized.
llvm-svn: 321986
Advance the memory region offset when handling a linker script data
command such as BYTE or LONG. Failure to advance the offset results
in corrupted output with overlapping sections.
Update tests to check for this combination of both a) memory regions
and b) data commands.
Fixes https://bugs.llvm.org/show_bug.cgi?id=35565
Patch by Owen Shaw!
llvm-svn: 321418
The size of an OutputSection is calculated early, to aid handling of compressed
debug sections. However, subsequent to this point, unused synthetic sections are
removed. In the event that an OutputSection, from which such an InputSection is
removed, is still required (e.g. because it has a symbol assignment), and no longer
has any InputSections, dot assignments, or BYTE()-family directives, the size
member is never updated when processing the commands. If the removed InputSection
had a non-zero size (such as a .got.plt section), the section ends up with the
wrong size in the output.
The fix is to reset the OutputSection size prior to processing the linker script
commands relating to that OutputSection. This ensures that the size is correct even
in the above situation.
Additionally, to reduce the risk of developers misusing OutputSection Size and
InputSection OutSecOff, they are set to simply the number of InputSections in an
OutputSection, and the corresponding index respectively. We cannot completely
stop using them, due to SHF_LINK_ORDER sections requiring them.
Compressed debug sections also require the full size. This is now calculated in
maybeCompress for these kinds of sections.
Reviewers: ruiu, rafael
Differential Revision: https://reviews.llvm.org/D38361
llvm-svn: 320472
When an output section has no byte commands and has no input sections then it
would be ideal if the type of the section is SHT_NOBITS so that the file can
take up less space. This change sets the default type of of output sections to
SHT_NOBITS instead of SHT_PROGBITS to allow this. This required some minor test
changes (which double as tests for this new behavior) but extend-pt-load.s had
be changed in a non-trivial way. Since it seems to me that the point of the
test is to point out the consequences of how flags are assigned to output
sections that don't have input sections I changed the test to work and still
show how the memsize of the executable segment was changed.
Differential Revision: https://reviews.llvm.org/D41082
llvm-svn: 320437
This is for "Bug 35474 - --emit-relocs produces wrongly-named reloc sections".
LLD currently for scripts like:
.text.boot : { *(.text.boot) }
emits relocation section with name .rela.text because does not take
redefined name of output section into account and builds section name
using rules for non-scripted case. Patch fixes this oddness.
Differential revision: https://reviews.llvm.org/D40652
llvm-svn: 319526
When a linker script has "foo = bar" and bar is the result of a copy
relocation foo should point to the same location in .bss.
This is part of a growing evidence that copy relocations should be
implemented by using replaceSymbol to replace the SharedSymbol with a
Defined.
llvm-svn: 319449
This fixes PR35223.
Here I enabled SHF_MERGE section content merging for -r like
we do for regular linking.
Differential revision: https://reviews.llvm.org/D40026
llvm-svn: 318516
Now that DefinedRegular is the only remaining derived class of
Defined, we can merge the two classes.
Differential Revision: https://reviews.llvm.org/D39667
llvm-svn: 317448
That class is used only by LinkerScript.cpp, so we should move it to
that file. Also, it no longer has to be a "factory" class. It can just
be a non-member function.
llvm-svn: 317427
Now that we have only SymbolBody as the symbol class. So, "SymbolBody"
is a bit strange name now. This is a mechanical change generated by
perl -i -pe s/SymbolBody/Symbol/g $(git grep -l SymbolBody lld/ELF lld/COFF)
nd clang-format-diff.
Differential Revision: https://reviews.llvm.org/D39459
llvm-svn: 317370
The way we handle ONLY_IF_RO/ONLY_IF_RW constraints in
processSectionCommands is a bit tricky. If input sections
does no satisfy given constraint we remove command from
commands list. It seems too complex, what we can do instead
is to make the OutputCommand empty. So that at later steps
LLD will remove it just like it deal with other empty output commands.
That allows to simplify the loop a bit.
Differential revision: https://reviews.llvm.org/D39094
llvm-svn: 317082
SymbolBody and Symbol were separated classes due to a historical reason.
Symbol used to be a pointer to a SymbolBody, and the relationship
between Symbol and SymbolBody was n:1.
r2681780 changed that. Since that patch, SymbolBody and Symbol are
allocated next to each other to improve memory locality, and they have
1:1 relationship now. So, the separation of Symbol and SymbolBody no
longer makes sense.
This patch merges them into one class. In order to avoid updating too
many places, I chose SymbolBody as a unified name. I'll rename it Symbol
in a follow-up patch.
Differential Revision: https://reviews.llvm.org/D39406
llvm-svn: 317006
When there is no SECTION commands given, all sections are
technically orphans, but now we handle script orphans sections
and regular "orphans" sections for non-scripted case differently,
though we can handle them at one place.
Patch do that change.
Differential revision: https://reviews.llvm.org/D39045
llvm-svn: 316984
This moves reporting of garbage collected sections right after
we do GC. That simplifies things.
Differential revision: https://reviews.llvm.org/D39058
llvm-svn: 316759
"/DISCARD/" is a special section name in the linker script to discard
input sections. Previously, we handled it as if it were a real section,
so an input section can be assigned but dead. However, allowing sections
to be
- assigned and alive (will be emitted),
- not assigned and dead (removed), or
- assigned but dead (???)
feels logically wrong and practically error-prone. This patch removes
the last combination of the states.
llvm-svn: 316622
It is PR34946.
Spec (http://man7.org/linux/man-pages/man1/ld.1.html) tells about
--orphan-handling=MODE, option where MODE can be one of four:
"place", "discard", "warn", "error".
Currently we already report orphans when -verbose given,
what becomes excessive with option implemented.
Patch stops reporting orphans when -versbose is given,
and support "place", "warn" and "error" modes.
It is not yet clear that "discard" mode is useful so it is not supported.
Differential revision: https://reviews.llvm.org/D39000
llvm-svn: 316583
If a struct has a std::unique_ptr member, the logical interpretation
is that that member will be destroyed with the struct.
That is not the case for Ctx. It is has to be deleted earlier and its
lifetime is defined by the functions where the AddressState is
created.
llvm-svn: 316378
Summary:
This will allow using the functionality from other linkers. It is also
a prerequisite for sharing the error logging code.
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: emaste, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D38822
llvm-svn: 315725
This is PR34546.
Currently LLD creates output sections even if it has no input sections,
but its command contains an assignment.
Committed code just assigns the same flag that was used in previous
live section.
That does not work sometimes. For example if we have following script:
.ARM.exidx : { *(.ARM.exidx*) }
.foo : { _foo = 0; } }
Then first section has SHF_LINK_ORDER flag. But section foo should not.
That was a reason of crash in OutputSection::finalize(). LLD tried to calculate
Link value, calling front() on empty input sections list.
We should only keep access flags and omit all others when creating such sections.
Patch fixes the crash observed.
Differential revision: https://reviews.llvm.org/D37736
llvm-svn: 315441
Usually, a function that does symbol lookup takes symbol name as
its first argument. Also, if a function takes a source location hint,
it is usually the last parameter. So the previous parameter order
was counter-intuitive.
llvm-svn: 315433
Because of r314495, DefinedCommon symbols cannot reach to
getSymbolValue function. When they reach the fucntion, they have
already been converted to DefinedRegular symbols.
llvm-svn: 315432
We used CurAddressState to capture a dynamic context just like
we use lambdas to capture static contexts. So, CurAddressState
is used everywhere in LinkerScript.cpp. It is worth a shorter
name.
llvm-svn: 315418
"Commands" was ambiguous because in the linker script, everything is
a command. We used to handle only SECTIONS commands, and at the time,
it might make sense to call them the commands, but it is no longer
the case. We handle not only SECTIONS but also MEMORY, PHDRS, VERSION,
etc., and they are all commands.
llvm-svn: 315409
HasSections is true if there is at least one SECTIONS linker
script command, and it is not directly related to whether we have
section objects or not. So I think the new name is better.
llvm-svn: 315405
ScriptConfiguration was a class to contain parsed results of
linker scripts. LinkerScript is a class to interpret it.
That ditinction was needed because we haven't instantiated
LinkerScript early (because, IIRC, LinkerScript class was a
ELFT template function). So, when we parse linker scripts,
we couldn't directly store the result to a LinkerScript instance.
Now, that limitation is gone. We instantiate LinkerScript
at the very beginning of our main function. We can directly
store parse results to a LinkerScript instance.
llvm-svn: 315403
Because addRegular's functionality is tightly coupled with
addSymbol, and the former is called only once, it makes sense
to merge the two functions. This patch also adds comments.
llvm-svn: 315401
When parsing linker scripts, LLD previously started with a '.' value of 0,
regardless of the internal default image base for the target, and regardless of
switches such as --image-base. It seems reasonable to use a different image base
value when using linker scripts and --image-base is specified, since otherwise the
switch has no effect. This change does this, as well as removing unnecessary
initialisation of Dot where it is not used.
The default image base should not be used when processing linker
scripts, because this will change the behaviour for existing linker script users,
and potentially result in invalid output being produced, as a subsequent assignment
to Dot could move the location counter backwards. Instead, we maintain the existing
behaviour of starting from 0 if --image-base is not specified.
Reviewers: ruiu
Differential Revision: https://reviews.llvm.org/D38360
llvm-svn: 315293
Previously, when we added an input section to an output section, we
called `OutputSectionFactory::addInputSec`. This isn't a good design
because, a factory class is intended to create a new object and
return it, but in this use case, it will never create a new object.
This patch fixes the design flaw.
llvm-svn: 315138
Factory::addInputSec added an output section to Script->Opt.Commands,
but that is too subtle. This patch makes it explicit so that it is easy
to see when a new element is added to Script->Opt.Commands.
llvm-svn: 315129
This patch moves a std::find to a new function. It also removes
the following piece of code. I believe it should be fine because all
tests still pass.
unsigned Index = std::distance(Opt.Commands.begin(), I);
assert(Sec->SectionIndex == INT_MAX || Sec->SectionIndex == Index);
Sec->SectionIndex = Index;
llvm-svn: 315125
addSection function was hard to read because it behaves differently
depending on its arguments but what exactly it does is not clear.
Now it should be better. Still, it is not clear (not what but) why
it does what it does, but I'll take a look at it later.
llvm-svn: 315124
That makes code a bit more consistent. Instead of removing sections there
we can just mark them as dead. So that removeEmptyCommands() will
handle the rest.
Differential revision: https://reviews.llvm.org/D38393
llvm-svn: 314654
Rui Ueyama