When trying to read a core file that is not owned by the user running lldb
and that doesn't have read permission on the file, lldb shows a misleading
error message:
```
Unable to find process plug-in for core file
```
This is due to the fact that currently, lldb doesn't check the file
ownership. And when trying to to open and read a core file, the syscall
fails, which prevents a process to be created.
Since lldb already have a portable `open` syscall interface, lets take
advantage of that and delegate the error handling to the syscall
itself. This way, no matter if the file exists or if the user has proper
ownership, lldb will always try to open the file, and behave accordingly
to the error code returned.
rdar://42630030
https://reviews.llvm.org/D78712
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Summary:
The interactions between the environment settings (`target.env-vars`,
`target.inherit-env`) and the inferior life-cycle are non-obvious
today. For example, if `target.inherit-env` is set, the `target.env-vars`
setting will be augmented with the contents of the host environment
the first time the launch environment is queried (usually at
launch). After that point, toggling `target.inherit-env` will have no
effect as there's no tracking of what comes from the host and what is
a user setting.
This patch computes the environment every time it is queried rather
than updating the contents of the `target.env-vars` property. This
means that toggling the `target.inherit-env` property later will now
have the intended effect.
This patch also adds a `target.unset-env-vars` settings that one can
use to remove variables from the launch environment. Using this, you
can inherit all but a few of the host environment.
The way the launch environment is constructed is:
1/ if `target.inherit-env` is set, then read the host environment
into the launch environment.
2/ Remove for the environment the variables listed in
`target.unset-env`.
3/ Augment the launch environment with the contents of
`target.env-vars`. This overrides any common values with the host
environment.
The one functional difference here that could be seen as a regression
is that `target.env-vars` will not contain the inferior environment
after launch. The patch implements a better alternative in the
`target show-launch-environment` command which will return the
environment computed through the above rules.
Reviewers: labath, jingham
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76470
Summary:
All of our lookup APIs either use `CompilerDeclContext &` or `CompilerDeclContext *` semi-randomly it seems.
This leads to us constantly converting between those two types (and doing nullptr checks when going from
pointer to reference). It also leads to the confusing situation where we have two possible ways to express
that we don't have a CompilerDeclContex: either a nullptr or an invalid CompilerDeclContext (aka a default
constructed CompilerDeclContext).
This moves all APIs to use references and gets rid of all the nullptr checks and conversions.
Reviewers: labath, mib, shafik
Reviewed By: labath, shafik
Subscribers: shafik, arphaman, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74607
My refactor caused some changes in error reporting that TestAddDsymCommand.py
was checking, so this restores some of the changes to preserve the old
behavior and to un-xfail the affected test.
Differential Revision: https://reviews.llvm.org/D74001
* [NFC] Renamed local `matching_module_list` to `matching_modules` for
conciseness.
* [NFC] Eliminated redundant local variable `num_matches` to reduce the risk
that changes get it out of sync with `matching_modules.GetSize()`.
* Used an early return from case where the symbol file specified matches
multiple modules. This is a slight behavior change, but it's an improvement:
It didn't make sense to tell the user that the symbol file simultaneously
matched multiple modules and no modules.
* [NFC] Used an early return from the case where no matches are found, to
better align with LLVM coding style.
* [NFC] Simplified call of `AppendWarningWithFormat("%s", stuff)` to
`AppendWarning(stuff)`. I don't think this adds any copies. It does
construct a StringRef, but it was going to have to scan the string for the
length anyway.
* [NFC] Removed unnecessary comments and reworded others for clarity.
* Used an early return if the symbol file could not be loaded. This is a
behavior change because previously it could fail silently.
* Used an early return if the object file could not be retrieved from the
symbol file. Again, this is a change because now there's an error message.
* [NFC] Eliminated a namespace alias that wasn't particularly helpful.
Differential Revision: https://reviews.llvm.org/D73594
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
The 'asynchronously' argument to both GetLLDBCommandsFromIOHandler and
GetPythonCommandsFromIOHandler is true for all call sites. This commit
simplifies the API by dropping it and giving the baton a default
argument.
Summary: This removes most of unnecessary includes in the `source/Commands` directory. This was generated by IWYU and a script that fixed all the bogus reports from IWYU. Patch is tested on Linux and macOS.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: krytarowski, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71489
Summary:
CompileUnit is a complicated class. Having it be implicitly convertible
to a FileSpec makes reasoning about it even harder.
This patch replaces the inheritance by a simple member and an accessor
function. This avoid the need for casting in places where one needed to
force a CompileUnit to be treated as a FileSpec, and does not add much
verbosity elsewhere.
It also fixes a bug where we were wrongly comparing CompileUnit& and a
CompileUnit*, which compiled due to a combination of this inheritance
and the FileSpec*->FileSpec implicit constructor.
Reviewers: teemperor, JDevlieghere, jdoerfert
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70827
Summary:
Adds support for doing range-based for-loops on LLDB's VariableList and
modernises all the index-based for-loops in LLDB where possible.
Reviewers: labath, jdoerfert
Reviewed By: labath
Subscribers: JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70668
Made small improvements while debugging through
CommandObjectTarget::AddModuleSymbols.
1. Refactored error case for an early out, reducing the indentation of
the rest of this long function.
2. Clarified some comments by correcting spelling and punctuation.
3. Reduced duplicate code at the end of the function.
Tested with `ninja check-lldb`
Differential Review: https://reviews.llvm.org/D70458
Summary: This option was added downstream in swift-lldb. This upstreams this option as it seems useful and also adds the missing tests.
Reviewers: #lldb, kwk, labath
Reviewed By: kwk, labath
Subscribers: labath, kwk, abidh, JDevlieghere, lldb-commits
Tags: #lldb, #upstreaming_lldb_s_downstream_patches
Differential Revision: https://reviews.llvm.org/D69944
This patch removes the size_t return value and the append parameter
from the remainder of the Find.* functions in LLDB's internal API. As
in the previous patches, this is motivated by the fact that these
parameters aren't really used, and in the case of the append parameter
were frequently implemented incorrectly.
Differential Revision: https://reviews.llvm.org/D69119
llvm-svn: 375160
This patch adds an implementation of unwinding using PE EH info. It allows to
get almost ideal call stacks on 64-bit Windows systems (except some epilogue
cases, but I believe that they can be fixed with unwind plan disassembly
augmentation in the future).
To achieve the goal the CallFrameInfo abstraction was made. It is based on the
DWARFCallFrameInfo class interface with a few changes to make it less
DWARF-specific.
To implement the new interface for PECOFF object files the class PECallFrameInfo
was written. It uses the next helper classes:
- UnwindCodesIterator helps to iterate through UnwindCode structures (and
processes chained infos transparently);
- EHProgramBuilder with the use of UnwindCodesIterator constructs EHProgram;
- EHProgram is, by fact, a vector of EHInstructions. It creates an abstraction
over the low-level unwind codes and simplifies work with them. It contains
only the information that is relevant to unwinding in the unified form. Also
the required unwind codes are read from the object file only once with it;
- EHProgramRange allows to take a range of EHProgram and to build an unwind row
for it.
So, PECallFrameInfo builds the EHProgram with EHProgramBuilder, takes the ranges
corresponding to every offset in prologue and builds the rows of the resulted
unwind plan. The resulted plan covers the whole range of the function except the
epilogue.
Reviewers: jasonmolenda, asmith, amccarth, clayborg, JDevlieghere, stella.stamenova, labath, espindola
Reviewed By: jasonmolenda
Subscribers: leonid.mashinskiy, emaste, mgorny, aprantl, arichardson, MaskRay, lldb-commits, llvm-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67347
llvm-svn: 374528
In r368345 I accidentally introduced a regression that would
over-report the number of matches found by FindTypes if the
DeclContext Filter was hit.
This patch simply removes the size_t return parameter altogether —
it's not that useful.
rdar://problem/55500457
Differential Revision: https://reviews.llvm.org/D68169
llvm-svn: 373344
Summary:
This patch removes File::SetStream() and File::SetDescriptor(),
and replaces most direct uses of File with pointers to File.
Instead of calling SetStream() on a file, we make a new file and
replace it.
My ultimate goal here is to introduce a new API class SBFile, which
has full support for python io.IOStream file objects. These can
redirect read() and write() to python code, so lldb::Files will
need a way to dispatch those methods. Additionally it will need some
form of sharing and assigning files, as a SBFile will be passed in and
assigned to the main IO streams of the debugger.
In my prototype patch queue, I make File itself copyable and add a
secondary class FileOps to manage the sharing and dispatch. In that
case SBFile was a unique_ptr<File>.
(here: https://github.com/smoofra/llvm-project/tree/files)
However in review, Pavel Labath suggested that it be shared_ptr instead.
(here: https://reviews.llvm.org/D67793)
In order for SBFile to use shared_ptr<File>, everything else should
as well.
If this patch is accepted, I will make SBFile use a shared_ptr
I will remove FileOps from future patches and use subclasses of File
instead.
Reviewers: JDevlieghere, jasonmolenda, zturner, jingham, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67891
llvm-svn: 373090
The StringRef should always be identical to the C string, so we
might as well just create the StringRef from the C-string. This
might be slightly slower until we implement the storage of ArgEntry
with a string instead of a std::unique_ptr<char[]>. Until then we
have to do the additional strlen on the C string to construct the
StringRef.
llvm-svn: 371842
Summary:
We currently have several CommandObjects that manually reimplement the checking for a selected target
or a target in the execution context (which is the selected target when they are invoked). This patch removes
all these checks and replaces them by setting the eCommandRequiresTarget flag that Pavel suggested. With
this flag we are doing the same check but without having to duplicate this code in all these CommandObjects.
I also added a `GetSelectedTarget()` variant of the `GetSelectedOrDummyTarget()` function to the
CommandObject that checks that the flag is set and then returns a reference to the target. I didn't rewrite
all the `target` variables from `Target *` to `Target &` in this patch as last time this change caused a lot of merge
conflicts in Swift and I would prefer having that in a separate NFC commit.
Reviewers: labath, clayborg
Reviewed By: labath, clayborg
Subscribers: clayborg, JDevlieghere, jingham, amccarth, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66863
llvm-svn: 370571
Summary:
We always have a dummy target, so any error handling regarding a missing dummy target is dead code now.
Also makes the CommandObject methods that return Target& to express this fact in the API.
This patch just for the CommandObject part of LLDB. I'll migrate the rest of LLDB in a follow-up patch that's WIP.
Reviewers: labath
Reviewed By: labath
Subscribers: abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66737
llvm-svn: 369939
Summary:
We currently have a bunch of code that is supposed to handle invalid command options, but
all this code is unreachable because invalid options are already handled in `Options::Parse`.
The only way we can reach this code is when we declare but then not implement an option
(which will be made impossible with D65386, which is also when we can completely remove
the `default` cases).
This patch replaces all this code with `llvm_unreachable` to make clear this is dead code
that can't be reached.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66522
llvm-svn: 369625
Summary:
We still have some leftovers of the old completion API in the internals of
LLDB that haven't been replaced by the new CompletionRequest. These leftovers
are:
* The return values (int/size_t) in all completion functions.
* Our result array that starts indexing at 1.
* `WordComplete` mode.
I didn't replace them back then because it's tricky to figure out what exactly they
are used for and the completion code is relatively untested. I finally got around
to writing more tests for the API and understanding the semantics, so I think it's
a good time to get rid of them.
A few words why those things should be removed/replaced:
* The return values are really cryptic, partly redundant and rarely documented.
They are also completely ignored by Xcode, so whatever information they contain will end up
breaking Xcode's completion mechanism. They are also partly impossible to even implement
as we assign negative values special meaning and our completion API sometimes returns size_t.
Completion functions are supposed to return -2 to rewrite the current line. We seem to use this
in some untested code path to expand the history repeat character to the full command, but
I haven't figured out why that doesn't work at the moment.
Completion functions return -1 to 'insert the completion character', but that isn't implemented
(even though we seem to activate this feature in LLDB sometimes).
All positive values have to match the number of results. This is obviously just redundant information
as the user can just look at the result list to get that information (which is what Xcode does).
* The result array that starts indexing at 1 is obviously unexpected. The first element of the array is
reserved for the common prefix of all completions (e.g. "foobar" and "footar" -> "foo"). The idea is
that we calculate this to make the life of the API caller easier, but obviously forcing people to have
1-based indices is not helpful (or even worse, forces them to manually copy the results to make it
0-based like Xcode has to do).
* The `WordComplete` mode indicates that LLDB should enter a space behind the completion. The
idea is that we let the top-level API know that we just provided a full completion. Interestingly we
`WordComplete` is just a single bool that somehow represents all N completions. And we always
provide full completions in LLDB, so in theory it should always be true.
The only use it currently serves is providing redundant information about whether we have a single
definitive completion or not (which we already know from the number of results we get).
This patch essentially removes `WordComplete` mode and makes the result array indexed from 0.
It also removes all return values from all internal completion functions. The only non-redundant information
they contain is about rewriting the current line (which is broken), so that functionality was moved
to the CompletionRequest API. So you can now do `addCompletion("blub", "description", CompletionMode::RewriteLine)`
to do the same.
For the SB API we emulate the old behaviour by making the array indexed from 1 again with the common
prefix at index 0. I didn't keep the special negative return codes as we either never sent them before (e.g. -2) or we
didn't even implement them in the Editline handler (e.g. -1).
I tried to keep this patch minimal and I'm aware we can probably now even further simplify a bunch of related code,
but I would prefer doing this in follow-up NFC commits
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arphaman, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66536
llvm-svn: 369624
Resolve the path in the target create output. This is nice when passing
relative paths to the lldb command line driver.
$ lldb ./binary
(lldb) target create "./binary"
Current executable set to '/absolute/path/to/binary' (x86_64).
This change only affects the target create output and does not change
the debugger's behavior. It doesn't resolve symbolic links so it won't
cause confusing when debugging something like clang++ that's symlinked
to clang.
Differential revision: https://reviews.llvm.org/D65611
llvm-svn: 368182
After the recent refactorings the SymbolVendor passthrough no longer
serve any purpose. This patch removes those methods, and updates all
callsites to go to the symbol file directly -- in most cases that just
means calling GetSymbolFile()->foo() instead of
GetSymbolVendor()->foo().
llvm-svn: 368001
Summary:
This patch removes the GetSymtab method from the SymbolVendor, which is
a no-op as it's implementation just forwards to the relevant SymbolFile.
Instead it creates a Module::GetSymtab, which calls the SymbolFile
method directly.
All callers have been updated to use the Module method directly instead
of a two phase GetSymbolVendor->GetSymtab search, which leads to reduced
intentation in a lot of deeply nested code.
Reviewers: clayborg, JDevlieghere, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D65569
llvm-svn: 367820
Summary:
This is the next step in avoiding funneling all SymbolFile calls through
the SymbolVendor. Right now, it is just a convenience function, but it
allows us to update all calls to SymbolVendor functions to access the
SymbolFile directly. Once all call sites have been updated, we can
remove the GetSymbolVendor member function.
This patch just updates the calls to GetSymbolVendor, which were calling
it just so they could fetch the underlying symbol file. Other calls will
be done in follow-ups.
Reviewers: JDevlieghere, clayborg, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D65435
llvm-svn: 367664
Reformat OptionEnumValueElement to make it easier to distinguish between
its fields. This also removes the need to disable clang-format for these
arrays.
Differential revision: https://reviews.llvm.org/D65489
llvm-svn: 367638
Summary:
Right now our CommandOptions.inc only generates the initializer for the options list but
not the array declaration boilerplate around it. As the array definition is identical for all arrays,
we might as well also let the CommandOptions.inc generate it alongside the initializers.
This patch will also allow us to generate additional declarations related to that option list in
the future (e.g. a enum class representing the specific options which would make our
handling code less prone).
This patch also fixes a few option tables that didn't follow our naming style.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65331
llvm-svn: 367186
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
It seems having two Options.inc files in the same project is giving our
custom Xcode project a hard time. This patch renames the new Options.inc
to CommandOptions.inc to prevent this conflict.
llvm-svn: 366196
Summary:
We currently have man large arrays containing initializers for our command options.
These tables are tricky maintain as we don't have any good place to check them for consistency and
it's also hard to read (`nullptr, {}, 0` is not very descriptive).
This patch fixes this by letting table gen generate those tables. This way we can have a more readable
syntax for this (especially for all the default arguments) and we can let TableCheck check them
for consistency (e.g. an option with an optional argument can't have `eArgTypeNone`, naming of flags', etc.).
Also refactoring the related data structures can now be done without changing the hundred of option initializers.
For example, this line:
```
{LLDB_OPT_SET_ALL, false, "hide-aliases", 'a', OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone, "Hide aliases in the command list."},
```
becomes this:
```
def hide_aliases : Option<"hide-aliases", "a">, Desc<"Hide aliases in the command list.">;
```
For now I just moved a few initializers to the new format to demonstrate the change. I'll slowly migrate the other
option initializers tables in separate patches.
Reviewers: JDevlieghere, davide, sgraenitz
Reviewed By: JDevlieghere
Subscribers: jingham, xiaobai, labath, mgorny, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64365
llvm-svn: 365908
Summary:
Previous patch (r360409) introduced the "symbol file unwind plan"
concept, but that plan wasn't used for unwinding yet. With this patch,
we start to consider the new plan as a possible strategy for both
synchronous and asynchronous unwinding. I also add a test that asserts
that unwinding via breakpad STACK CFI info works end-to-end.
Reviewers: jasonmolenda, clayborg
Subscribers: lldb-commits, amccarth, markmentovai
Differential Revision: https://reviews.llvm.org/D61853
llvm-svn: 361618
Summary:
some unwind formats are specific to a single symbol file and so it does
not make sense for their parsing code live in the general Symbol library
(as is the case with eh_frame for instance). This is the case for the
unwind information in breakpad files, but the same will probably be true
for PDB unwind info (once we are able to parse that).
This patch adds the ability to fetch an unwind plan provided by a symbol
file plugin, as discussed in the RFC at
<http://lists.llvm.org/pipermail/lldb-dev/2019-February/014703.html>.
I've kept the set of changes to a minimum, as there is no way to test
them until we have a symbol file which implements this API -- that is
comming in a follow-up patch, which will also implicitly test this
change.
The interesting part here is the introduction of the
"RegisterInfoResolver" interface. The reason for this is that breakpad
needs to be able to resolve register names (which are present as strings
in the file) into register enums so that it can construct the unwind
plan. This is normally done via the RegisterContext class, handing this
over to the SymbolFile plugin would mean that it has full access to the
debugged process, which is not something we want it to have. So instead,
I create a facade, which only provides the ability to query register
names, and hide the RegisterContext behind the facade.
Also note that this only adds the ability to dump the unwind plan
created by the symbol file plugin -- the plan is not used for unwinding
yet -- this will be added in a third patch, which will add additional
tests which makes sure the unwinding works as a whole.
Reviewers: jasonmolenda, clayborg
Subscribers: markmentovai, amccarth, lldb-commits
Differential Revision: https://reviews.llvm.org/D61732
llvm-svn: 360409
In r359354 a GetDebugger() method was added to the CommandObject class,
so that we didn't have to go through the command interpreter to obtain
the script interpreter. This patch simplifies other call sites where
m_interpreter.GetDebugger() was used, and replaces them with a shorter
call to the new method.
llvm-svn: 359373
Before a Debugger gets a Target, target settings are routed to a global set
of settings. Even without this, some part of the LLDB which exist independently
of the Debugger object (the Module cache, the Symbol vendors, ...) access
directly the global default store for those settings.
Of course, if you modify one of those global settings while they are being read,
bad things happen. We see this quite a bit with FileSpecList settings. In
particular, we see many cases where one debug session changes
target.exec-search-paths while another session starts up and it crashes when
one of those accesses invalid FileSpecs.
This patch addresses the specific FileSpecList issue by adding locking to
OptionValueFileSpecList and never returning by reference.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D60468
llvm-svn: 359028
Summary:
This argument was added back in 2010 (r118882) to support the ability to unwind
from functions whose eh_frame entry does not cover the entire range of
the function.
However, due to the caching happening in FuncUnwinders, this solution is
very fragile. FuncUnwinders will cache the plan it got from eh_frame
regardless of the value of the current_offset, so our ability to unwind
from a given function depended what was the value of "current_offset" the
first time that this function was called.
Furthermore, since the "image show-unwind" command did not know what's
the right offset to pass, this created an unfortunate situation where
"image show-unwind" would show no valid plans for a function, even
though they were available and being used.
In this patch I implement the feature slightly differently. Instead of
giving just a base address to the eh_frame unwinder, I give it the
entire range we are interested in. Then, I change the unwinder to return
the first plan that covers (even partially) that range. This way even a
partial plan will be returned, regardless of the address in the function
where we are stopped at.
This solution is still not 100% correct, as it will not handle a
function which is covered by two independent fde entries. However, I
don't expect anybody will write this kind of functions, and this wasn't
handled by the previous implementation either. If this is ever needed in
the future. The eh_frame unwinder can be extended to return "composite"
unwind plans created by merging sevelar fde entries.
I also create a test which triggers this scenario. As doing this is
virtually impossible without hand-written assembly, the test only works
on x86 linux.
Reviewers: jasonmolenda, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D60829
llvm-svn: 358964
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
Add a flag to control whether the ModulesDidLoad notification is
called when a module is added. If the notifications are disabled,
the caller must call ModulesDidLoad after adding all the new modules,
but postponing this notification until they're all batched up can
allow for better efficiency than notifying one-by-one.
Change the name of the ModuleList notifier functions that a subclass
can implement to start with 'Notify' to make it clear what they are.
Add a NotifyModulesRemoved.
Add header documentation for the changed/updated methods.
Added defaulted-value 'notify' argument to ModuleList Append,
AppendIfNeeded, and Remove because callers working with a local
ModuleList don't have an obvious idea of what notify means in this
context. When the ModuleList is a part of the Target class, the
notify behavior matters.
DynamicLoaderDarwin has been updated so that libraries being
added/removed are correctly batched up before notifications are
sent. Added the TestModuleLoadedNotifys.py test to run on
Darwin to test this.
<rdar://problem/48293064>
Differential Revision: https://reviews.llvm.org/D60172
llvm-svn: 357955
Summary:
Within .lldbinit, regex commands can be structured as a list of substitutions over
multiple lines. It's possible that this is uninentional, but it works and has
benefits.
For example:
command regex <command-name>
s/pat1/repl1/
s/pat2/repl2/
...
I use this form of `command regex` in my `~/.lldbinit`, because it makes it
clearer to write and read compared to a single line definition, because
multiline substitutions don't need to be quoted, and are broken up one per line.
However, multiline definitions result in usage instructions being printed for
each use. The result is that every time I run `lldb`, I get a dozen or more
lines of noise. With this change, the instructions are only printed when
`command regex` is invoked interactively, or from a terminal, neither of which
are true when lldb is sourcing `~/.lldbinit`.
Reviewers: clayborg, jingham
Reviewed By: clayborg
Subscribers: jdoerfert, kastiglione, xiaobai, keith, lldb-commits
Differential Revision: https://reviews.llvm.org/D48752
llvm-svn: 355793
When the debugger is run in sync mode, you need to
be able to tell whether a hijacked resume is for some
special purpose (like waiting for the SIGSTOP on attach)
or just to perform a synchronous resume. Target::Launch was doing
that wrong, and that caused stop-hooks on process launch
in source files to behave incorrectly.
<rdar://problem/48115661>
Differential Revision: https://reviews.llvm.org/D58727
llvm-svn: 355213
Given that we have a target named Symbols, one wonders why a
file named Symbols.cpp is not in this target. To be clear,
the functions exposed from this file are really focused on
*locating* a symbol file on a given host, which is where the
ambiguity comes in. However, it makes more sense conceptually
to be in the Symbols target. While some of the specific places
to search for symbol files might change depending on the Host,
this is not inherently true in the same way that, for example,
"accessing the file system" or "starting threads" is
fundamentally dependent on the Host.
PDBs, for example, recently became a reality on non-Windows platforms,
and it's theoretically possible that DSYMs could become a thing on non
MacOSX platforms (maybe in a remote debugging scenario). Other types of
symbol files, such as DWO, DWP, etc have never been tied to any Host
platform anyway.
After this patch, there is only one remaining dependency from
Host to Target.
Differential Revision: https://reviews.llvm.org/D58730
llvm-svn: 355032
They aren't designed to nest recursively, so this will prevent that.
Also add a --auto-continue flag, putting "continue" in the stop hook makes
the stop hooks fight one another in multi-threaded programs.
Also allow more than one -o options so you can make more complex stop hooks w/o
having to go into the editor.
<rdar://problem/48115661>
Differential Revision: https://reviews.llvm.org/D58394
llvm-svn: 354706
Summary:
This is a preparatory step to enable adding extra unwind strategies by
symbol file plugins. This has been discussed on the lldb-dev mailing
list: <http://lists.llvm.org/pipermail/lldb-dev/2019-February/014703.html>.
Reviewers: jasonmolenda, clayborg, espindola
Subscribers: lemo, emaste, lldb-commits, arichardson
Differential Revision: https://reviews.llvm.org/D58129
llvm-svn: 354033
The `ap` suffix is a remnant of lldb's former use of auto pointers,
before they got deprecated. Although all their uses were replaced by
unique pointers, some variables still carried the suffix.
In r353795 I removed another auto_ptr remnant, namely redundant calls to
::get for unique_pointers. Jim justly noted that this is a good
opportunity to clean up the variable names as well.
I went over all the changes to ensure my find-and-replace didn't have
any undesired side-effects. I hope I didn't miss any, but if you end up
at this commit doing a git blame on a weirdly named variable, please
know that the change was unintentional.
llvm-svn: 353912
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This reapplies r350802, which was reverted because of issues with
parsing posix-style paths on windows hosts (and vice-versa). These have
since been fixed in r351328, and lldb should now recognise the path
style used in a dwarf compile unit correctly.
llvm-svn: 351435
This parameter was only ever used with the Module set, and
since a SymbolFile is tied to a module, the parameter turns
out to be entirely unnecessary. Furthermore, it doesn't make
a lot of sense to ask a caller to ask SymbolFile which is tied
to Module X to find types for Module Y, but that possibility
was open with the previous interface. By removing this
parameter from the API, it makes it harder to use incorrectly
as well as easier for an implementor to understand what it
needs to do.
llvm-svn: 351133
This reverts commit r350802 because the test fails on windows. This
happens because we treat the paths as windows paths even though they
have linux path separators in the asm file. That results in wrong paths
being computed (\tmp\tmp\a.c instead of /tmp/a.c).
Reverting until I can figure out what to do with this.
llvm-svn: 350810
Summary:
The motivation for this is being able to write tests for the upcoming
breakpad line table parser, but this could be useful for testing the
low-level workings of any line table format. Or simply for viewing the
line table information with more detail (the brief format doesn't
include any of the flags for end_of_prologue and similar).
I've also removed the load_addresses argument from the
DumpCompileUnitLineTable function, as it wasn't being used anywhere.
Reviewers: clayborg, zturner
Subscribers: JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D56315
llvm-svn: 350802
Summary:
This function was named such because in the case of MachO files, the
mach header is located at this address. However all (most?) usages of
this function were not interested in that fact, but the fact that this
address is used as the base address for expressing various relative
addresses in the object file.
For other object file formats, this name is not appropriate (and it's
probably the reason why this function was not implemented in these
classes). In the ELF case the ELF header will usually end up at this
address, but this is a result of the linker optimizing the file layout
and not a requirement of the spec. For COFF files, I believe the is no
header located at this address either.
Reviewers: clayborg, jasonmolenda, amccarth, lemo, stella.stamenova
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D55422
llvm-svn: 348849
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This is useful for investigating the clang ast as you reconstruct
it via by parsing debug info. It can also be used to write tests
against.
Differential Revision: https://reviews.llvm.org/D54072
llvm-svn: 346149
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
This patch removes the GetPermissions and GetReadable methods from
FileSpec and updates its uses with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53831
llvm-svn: 345843
When creating a target, lldb loads all dependent files (i.e. libs in
LC_LOAD_DYLIB for Mach-O). This can be confusing, especially when two
versions of the same library end up in the shared cache. It's possible
to change this behavior, by specifying target create -d <target> these
dependents are not loaded.
This patch changes the default behavior to only load dependent files
only when the target is an executable. When creating a target for a
library, it is now no longer necessary to pass -d. The user can still
override this behavior by specifying the -d option to change this
behavior.
rdar://problem/43721382
Differential revision: https://reviews.llvm.org/D51934
llvm-svn: 342634
This is an NFC commit to refactor the "load dependent files" parameter
from a boolean to an enum value. We want to be able to specify a
default, in which case we decide whether or not to load the dependent
files based on whether the target is an executable or not (i.e. a
dylib).
This is a dependency for D51934.
Differential revision: https://reviews.llvm.org/D51859
llvm-svn: 342633
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary:
We currently allow any completion handler to read and manipulate the list of matches we
calculated so far. This leads to a few problems:
Firstly, a completion handler's logic can now depend on previously calculated results
by another handlers. No completion handler should have such an implicit dependency,
but the current API makes it likely that this could happen (or already happens). Especially
the fact that some completion handler deleted all previously calculated results can mess
things up right now.
Secondly, all completion handlers have knowledge about our internal data structures with
this API. This makes refactoring this internal data structure much harder than it should be.
Especially planned changes like the support of descriptions for completions are currently
giant patches because we have to refactor every single completion handler.
This patch narrows the contract the CompletionRequest has with the different handlers to:
1. A handler can suggest a completion.
2. A handler can ask how many suggestions we already have.
Point 2 obviously means we still have a dependency left between the different handlers, but
getting rid of this is too large to just append it to this patch.
Otherwise this patch just completely hides the internal StringList to the different handlers.
The CompletionRequest API now also ensures that the list of completions is unique and we
don't suggest the same value multiple times to the user. This property has been so far only
been ensured by the `Option` handler, but is now applied globally. This is part of this patch
as the OptionHandler is no longer able to implement this functionality itself.
Reviewers: jingham, davide, labath
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49322
llvm-svn: 338151
Summary:
As suggested in D48796, this patch replaces even more internal calls that were using the old
completion API style with a single CompletionRequest. In some cases we also pass an option
vector/index, but as we don't always have this information, it currently is not part of the
CompletionRequest class.
The constructor of the CompletionRequest is now also more sensible. You only pass the
user input, cursor position and your list of matches to the request and the rest will be
inferred (using the same code we used before to calculate this). You also have to pass these
match window parameters to it, even though they are unused right now.
The patch shouldn't change any behavior.
Reviewers: jingham
Reviewed By: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D48976
llvm-svn: 337031
Summary:
This patch refactors the internal completion API. It now takes (as far as possible) a single
CompletionRequest object instead o half a dozen in/out/in-out parameters. The CompletionRequest
contains a common superset of the different parameters as far as it makes sense. This includes
the raw command line string and raw cursor position, which should make the `expr` command
possible to implement (at least without hacks that reconstruct the command line from the args).
This patch is not intended to change the observable behavior of lldb in any way. It's also as
minimal as possible and doesn't attempt to fix all the problems the API has.
Some Q&A:
Q: Why is this not fixing all the problems in the completion API?
A: Because is a blocker for the expr command completion which I want to get in ASAP. This is the
smallest patch that unblocks the expr completion patch and which allows trivial refactoring in the future.
The patch also doesn't really change the internal information flow in the API, so that hopefully
saves us from ever having to revert and resubmit this humongous patch.
Q: Can we merge all the copy-pasted code in the completion methods
(like computing the current incomplete arg) into CompletionRequest class?
A: Yes, but it's out of scope for this patch.
Q: Why the `word_complete = request.GetWordComplete(); ... ` pattern?
A: I don't want to add a getter that returns a reference to the internal integer. So we have
to use a temporary variable and the Getter/Setter instead. We don't throw exceptions
from what I can tell, so the behavior doesn't change.
Q: Why are we not owning the list of matches?
A: Because that's how the previous API works. But that should be fixed too (in another patch).
Q: Can we make the constructor simpler and compute some of the values from the plain command?
A: I think this works, but I rather want to have this in a follow up commit. Especially when making nested
request it's a bit awkward that the parsed arguments behave as both input/output (as we should in theory
propagate the changes on the nested request back to the parent request if we don't want to change the
behavior too much).
Q: Can't we pass one const request object and then just return another result object instead of mixing
them together in one in/out parameter?
A: It's hard to get keep the same behavior with that pattern, but I think we can also get a nice API with just
a single request object. If we make all input parameters read-only, we have a clear separation between what
is actually an input and what an output parameter (and hopefully we get rid of the in-out parameters).
Q: Can we throw out the 'match' variables that are not implemented according to the comment?
A: We currently just forward them as in the old code to the different methods, even though I think
they are really not used. We can easily remove and readd them once every single completion method just
takes a CompletionRequest, but for now I prefer NFC behavior from the perspective of the API user.
Reviewers: davide, jingham, labath
Reviewed By: jingham
Subscribers: mgorny, friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D48796
llvm-svn: 336146
SetFile has an optional style argument which defaulted to the native
style. This patch makes that argument mandatory so clients of the
FileSpec class are forced to think about the correct syntax.
At the same time this introduces a (protected) convenience method to
update the file from within the FileSpec class that keeps the current
style.
These two changes together prevent a potential pitfall where the style
might be forgotten, leading to the path being updated and the style
unintentionally being changed to the host style.
llvm-svn: 334663
Summary:
As discussed in https://bugs.llvm.org/show_bug.cgi?id=37317,
FindGlobalVariables does not properly handle the case where
append=false. As this doesn't seem to be used in the tree, this patch
removes the parameter entirely.
Reviewers: clayborg, jingham, labath
Reviewed By: clayborg
Subscribers: aprantl, lldb-commits, kubamracek, JDevlieghere
Differential Revision: https://reviews.llvm.org/D46885
Patch by Tom Tromey <ttromey@mozilla.com>.
llvm-svn: 333639
This change adds support for two types of Minidump CodeView records:
PDB70 (reference: https://crashpad.chromium.org/doxygen/structcrashpad_1_1CodeViewRecordPDB70.html)
This is by far the most common record type.
ELF BuildID (found in Breakpad/Crashpad generated minidumps)
This would set a proper UUID for placeholder modules, in turn enabling
an accurate match with local module images.
Differential Revision: https://reviews.llvm.org/D46292
llvm-svn: 331394
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Normally, LLDB is creating a high-fidelity representation of a live
process, including a list of modules and sections, with the
associated memory address ranges. In order to build the module and
section map LLDB tries to locate the local module image (object file)
and will parse it.
This does not work for postmortem debugging scenarios where the crash
dump (minidump in this case) was captured on a different machine.
Fortunately the minidump format encodes enough information about
each module's memory range to allow us to create placeholder modules.
This enables most LLDB functionality involving address-to-module
translations.
Also, we may want to completly disable the search for matching
local object files if we load minidumps unless we can prove that the
local image matches the one from the crash origin.
(not part of this change, see: llvm.org/pr35193)
Example: Identify the module from a stack frame PC:
Before:
thread #1, stop reason = Exception 0xc0000005 encountered at address 0x164d14
frame #0: 0x00164d14
frame #1: 0x00167c79
frame #2: 0x00167e6d
frame #3: 0x7510336a
frame #4: 0x77759882
frame #5: 0x77759855
After:
thread #1, stop reason = Exception 0xc0000005 encountered at address 0x164d14
frame #0: 0x00164d14 C:\Users\amccarth\Documents\Visual Studio 2013\Projects\fizzbuzz\Debug\fizzbuzz.exe
frame #1: 0x00167c79 C:\Users\amccarth\Documents\Visual Studio 2013\Projects\fizzbuzz\Debug\fizzbuzz.exe
frame #2: 0x00167e6d C:\Users\amccarth\Documents\Visual Studio 2013\Projects\fizzbuzz\Debug\fizzbuzz.exe
frame #3: 0x7510336a C:\Windows\SysWOW64\kernel32.dll
frame #4: 0x77759882 C:\Windows\SysWOW64\ntdll.dll
frame #5: 0x77759855 C:\Windows\SysWOW64\ntdll.dll
Example: target modules list
Before:
error: the target has no associated executable images
After:
[ 0] C:\Windows\System32\MSVCP120D.dll
[ 1] C:\Windows\SysWOW64\kernel32.dll
[ 2] C:\Users\amccarth\Documents\Visual Studio 2013\Projects\fizzbuzz\Debug\fizzbuzz.exe
[ 3] C:\Windows\System32\MSVCR120D.dll
[ 4] C:\Windows\SysWOW64\KERNELBASE.dll
[ 5] C:\Windows\SysWOW64\ntdll.dll
NOTE: the minidump format also includes the debug info GUID, so we can
fill-in the module UUID from it, but this part was excluded from this change
to keep the changes simple (the LLDB UUID is hardcoded to be either 16 or
20 bytes, while the CodeView GUIDs are normally 24 bytes)
Differential Revision: https://reviews.llvm.org/D45700
llvm-svn: 330302
Summary:
The Args class is used in plenty of places besides the command
interpreter (e.g., anything requiring an argc+argv combo, such as when
launching a process), so it needs to be in a lower layer. Now that the
class has no external dependencies, it can be moved down to the Utility
module.
This removes the last (direct) dependency from the Host module to
Interpreter, so I remove the Interpreter module from Host's dependency
list.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D45480
llvm-svn: 330200
Summary:
The idea behind this is to move the functionality which depend on other lldb
classes into a separate class. This way, the Args class can be turned
into a lightweight arc+argv wrapper and moved into the lower lldb
layers.
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D44306
llvm-svn: 329677
The difference between this and the previous patch is that now we use
ELF physical addresses only for loading objects into the target (and the
rest of the module load address logic still uses virtual addresses).
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: llvm-commits, arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>.
llvm-svn: 327970
This was a temporary thing, until llvm has proper support for formatting
time. That time has come, so we can remove the relevant code. There
should be no change in the format of the time.
llvm-svn: 319048
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
The core of this change is the new CommandInterpreter::m_command_state, which
models the state transitions for interactive commands, including an
"interrupted" state transition.
In general, command interruption requires cooperation from the code executing
the command, which needs to poll for interruption requests through
CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs was
likely the longest blocking part. (ex. target modules dump symtab on a
complex binary could take 10+ minutes)
patch by lemo
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 313904
Now -shlib flag can be provided alongside with names of symbols files:
(lldb) target symbols add --shlib stripper-lib.so unstripper-lib.so
This is helpful when default matching mechanisms by name and UUID
can't find a module, and the user needs to explicitly specify
which module the given symbol file belongs to.
Differential Revision: https://reviews.llvm.org/D35607
llvm-svn: 308933
Summary:
The classes have no dependencies, and they are used both by lldb and
lldb-server, so it makes sense for them to live in the lowest layers.
Reviewers: zturner, jingham
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34746
llvm-svn: 306682
Summary:
This is a beefed-up version of D33504, which adds support for dwarf 4
debug_frame section format.
The main difference here is that the decision whether to use eh_frame or
debug_frame is done on a per-function basis instead of per-object file.
This is necessary because one module can contain both sections (for
example, the start files added by the linker will typically pull in
eh_frame), but we want to be able to access both, for maximum
information.
I also add unit test for parsing various CFI formats (eh_frame,
debug_frame v3 and debug_frame v4).
Reviewers: jasonmolenda, clayborg
Subscribers: mgorny, aprantl, abidh, lldb-commits, tatyana-krasnukha
Differential Revision: https://reviews.llvm.org/D34613
llvm-svn: 306397
The Timer destructor would grab a global mutex in order to update
execution time. Add a class to define a category once, statically; the
class adds itself to an atomic singly linked list, and thus subsequent
updates only need to use an atomic rather than grab a lock and perform a
hashtable lookup.
Differential Revision: https://reviews.llvm.org/D32823
Patch by Scott Smith <scott.smith@purestorage.com>.
llvm-svn: 303058
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
this reverts r297116 because it breaks the unittests and
TestCompDirSymlink. The ModuleCache unit test is trivially fixable, but
the CompDirSymlink failure is a symptom of a deeper problem: llvm's stat
functionality is not a drop-in replacement for lldb's. The former is
based on stat(2) (which does symlink resolution), while the latter is
based on lstat(2) (which does not).
This also reverts subsequent build fixes (r297128, r297120, 297117) and
r297119 (Remove FileSpec dependency on FileSystem) which builds on top
of this.
llvm-svn: 297139
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
Summary: This commit adds an option to set PC to the entry point of the file loaded using "target module load" command. In D28804, Greg asked me to separate this part under a different option.
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28944
llvm-svn: 292989
For bare-metal targets, lldb was missing a command like 'load' in gdb
which can be used to create executable image on the target. This was
discussed in
http://lists.llvm.org/pipermail/lldb-dev/2016-December/011752.html
This commits adds an option to "target module load" command to provide
that functionality. It does not set the PC to entry address which will
be done separately.
Reviewed in https://reviews.llvm.org/D28804
llvm-svn: 292499
Konrad Kleine