Only tests in llvm/test/Analysis.
-analyze is legacy PM-specific.
This only touches files with `-passes`.
I looked through everything and made sure that everything had a new PM equivalent.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D109040
When computing a range for a SCEVUnknown, today we use computeKnownBits for unsigned ranges, and computeNumSignBots for signed ranges. This means we miss opportunities to improve range results.
One common missed pattern is that we have a signed range of a value which CKB can determine is positive, but CNSB doesn't convey that information. The current range includes the negative part, and is thus double the size.
Per the removed comment, the original concern which delayed using both (after some code merging years back) was a compile time concern. CTMark results (provided by Nikita, thanks!) showed a geomean impact of about 0.1%. This doesn't seem large enough to avoid higher quality results.
Differential Revision: https://reviews.llvm.org/D96534
The SCEV code for constructing GEP expressions currently assumes
that the addition of the base and all the offsets is nsw if the GEP
is inbounds. While the addition of the offsets is indeed nsw, the
addition to the base address is not, as the base address is
interpreted as an unsigned value.
Fix the GEP expression code to not assume nsw for the base+offset
calculation. However, do assume nuw if we know that the offset is
non-negative. With this, we use the same behavior as the
construction of GEP addrecs does. (Modulo the fact that we
disregard SCEV unification, as the pre-existing FIXME points out).
Differential Revision: https://reviews.llvm.org/D90648
And use it to model LLVM IR's `ptrtoint` cast.
This is essentially an alternative to D88806, but with no chance for
all the problems it caused due to having the cast as implicit there.
(see rG7ee6c402474a2f5fd21c403e7529f97f6362fdb3)
As we've established by now, there are at least two reasons why we want this:
* It will allow SCEV to actually model the `ptrtoint` casts
and their operands, instead of treating them as `SCEVUnknown`
* It should help with initial problem of PR46786 - this should eventually allow us
to not loose pointer-ness of an expression in more cases
As discussed in [[ https://bugs.llvm.org/show_bug.cgi?id=46786 | PR46786 ]], in principle,
we could just extend `SCEVUnknown` with a `is ptrtoint` cast, because `ScalarEvolution::getPtrToIntExpr()`
should sink the cast as far down into the expression as possible,
so in the end we should always end up with `SCEVPtrToIntExpr` of `SCEVUnknown`.
But i think that it isn't the best solution, because it doesn't really matter
from memory consumption side - there probably won't be *that* many `SCEVPtrToIntExpr`s
for it to matter, and it allows for much better discoverability.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D89456
While we haven't encountered an earth-shattering problem with this yet,
by now it is pretty evident that trying to model the ptr->int cast
implicitly leads to having to update every single place that assumed
no such cast could be needed. That is of course the wrong approach.
Let's back this out, and re-attempt with some another approach,
possibly one originally suggested by Eli Friedman in
https://bugs.llvm.org/show_bug.cgi?id=46786#c20
which should hopefully spare us this pain and more.
This reverts commits 1fb6104293,
7324616660,
aaafe350bb,
e92a8e0c74.
I've kept&improved the tests though.
This relands commit 1c021c64ca which was
reverted in commit 17cec6a11a because
an assertion was being triggered, since `BuildConstantFromSCEV()`
wasn't updated to handle the case where the constant we want to truncate
is actually a pointer. I was unsuccessful in coming up with a test case
where we'd end there with constant zext/sext of a pointer,
so i didn't handle those cases there until there is a test case.
Original commit message:
While we indeed can't treat them as no-ops, i believe we can/should
do better than just modelling them as `unknown`. `inttoptr` story
is complicated, but for `ptrtoint`, it seems straight-forward
to model it just as a zext-or-trunc of unknown.
This may be important now that we track towards
making inttoptr/ptrtoint casts not no-op,
and towards preventing folding them into loads/etc
(see D88979/D88789/D88788)
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D88806
> While we indeed can't treat them as no-ops, i believe we can/should
> do better than just modelling them as `unknown`. `inttoptr` story
> is complicated, but for `ptrtoint`, it seems straight-forward
> to model it just as a zext-or-trunc of unknown.
>
> This may be important now that we track towards
> making inttoptr/ptrtoint casts not no-op,
> and towards preventing folding them into loads/etc
> (see D88979/D88789/D88788)
>
> Reviewed By: mkazantsev
>
> Differential Revision: https://reviews.llvm.org/D88806
It caused the following assert during Chromium builds:
llvm/lib/IR/Constants.cpp:1868:
static llvm::Constant *llvm::ConstantExpr::getTrunc(llvm::Constant *, llvm::Type *, bool):
Assertion `C->getType()->isIntOrIntVectorTy() && "Trunc operand must be integer"' failed.
See code review for a link to a reproducer.
This reverts commit 1c021c64ca.
While we indeed can't treat them as no-ops, i believe we can/should
do better than just modelling them as `unknown`. `inttoptr` story
is complicated, but for `ptrtoint`, it seems straight-forward
to model it just as a zext-or-trunc of unknown.
This may be important now that we track towards
making inttoptr/ptrtoint casts not no-op,
and towards preventing folding them into loads/etc
(see D88979/D88789/D88788)
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D88806
Many tests use opt's -analyze feature, which does not translate well to
NPM and has better alternatives. The alternative here is to explicitly
add a pass that calls ScalarEvolution::print().
The legacy pass manager RUNs aren't changing, but they are now pinned to
the legacy pass manager. For each legacy pass manager RUN, I added a
corresponding NPM RUN using the 'print<scalar-evolution>' pass. For
compatibility with update_analyze_test_checks.py and existing test
CHECKs, 'print<scalar-evolution>' now prints what -analyze prints per
function.
This was generated by the following Python script and failures were
manually fixed up:
import sys
for i in sys.argv:
with open(i, 'r') as f:
s = f.read()
with open(i, 'w') as f:
for l in s.splitlines():
if "RUN:" in l and ' -analyze ' in l and '\\' not in l:
f.write(l.replace(' -analyze ', ' -analyze -enable-new-pm=0 '))
f.write('\n')
f.write(l.replace(' -analyze ', ' -disable-output ').replace(' -scalar-evolution ', ' "-passes=print<scalar-evolution>" ').replace(" | ", " 2>&1 | "))
f.write('\n')
else:
f.write(l)
There are a couple failures still in ScalarEvolution under NPM, but
those are due to other unrelated naming conflicts.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D83798
Summary:
The added assertion fails on the added test without the fix.
Reduced from test-suite/MultiSource/Benchmarks/MiBench/office-ispell/correct.c
In IR, getelementptr, obviously, takes pointer as it's base,
and returns a pointer.
When creating an SCEV expression, SCEV operands are sorted in hope
that it increases folding potential, and at the same time SCEVAddExpr's
type is the type of the last(!) operand.
Which means, in some exceedingly rare cases, pointer operand may happen to
end up not being the last operand, and as a result SCEV for GEP
will suddenly have a non-pointer return type.
We should ensure that does not happen.
In the end, actually storing the `Type *`, at the cost of increasing
memory footprint of `SCEVAddExpr`, appears to be the solution.
We can't just store a 'is a pointer' bit and create pointer type
on the fly since we don't have data layout in getType().
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=46457 | PR46457 ]]
Reviewers: efriedma, mkazantsev, reames, nikic
Reviewed By: efriedma
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82633
Arthur Eubanks