The translation scheme is mostly cribbed from FastISel, and it's not entirely
convincing semantically. But it does seem to work in the common cases and allow
variables to be printed so it can't be all wrong.
llvm-svn: 293228
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
This allows MIR passes to emit optimization remarks with the same level
of functionality that is available to IR passes.
It also hooks up the greedy register allocator to report spills. This
allows for interesting use cases like increasing interleaving on a loop
until spilling of registers is observed.
I still need to experiment whether reporting every spill scales but this
demonstrates for now that the functionality works from llc
using -pass-remarks*=<pass>.
Differential Revision: https://reviews.llvm.org/D29004
llvm-svn: 293110
Summary:
This patch prepares more for tail call support in XRay. Until the logging part supports tail calls, this is just staging, so it seems LLVM part is mostly ready with this patch.
Related: https://reviews.llvm.org/D28948 (compiler-rt)
Reviewers: dberris, rengolin
Reviewed By: dberris
Subscribers: llvm-commits, iid_iunknown, aemerson
Differential Revision: https://reviews.llvm.org/D28947
llvm-svn: 293080
The previous patch (https://reviews.llvm.org/rL289538) got reverted because of a bug. Chandler also requested some changes to the algorithm.
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161212/413479.html
This is an updated patch. The key difference is that collectBitProviders (renamed to calculateByteProvider) now collects the origin of one byte, not the whole value. It simplifies the implementation and allows to stop the traversal earlier if we know that the result won't be used.
From the original commit:
Match a pattern where a wide type scalar value is loaded by several narrow loads and combined by shifts and ors. Fold it into a single load or a load and a bswap if the targets supports it.
Assuming little endian target:
i8 *a = ...
i32 val = a[0] | (a[1] << 8) | (a[2] << 16) | (a[3] << 24)
=>
i32 val = *((i32)a)
i8 *a = ...
i32 val = (a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]
=>
i32 val = BSWAP(*((i32)a))
This optimization was discussed on llvm-dev some time ago in "Load combine pass" thread. We came to the conclusion that we want to do this transformation late in the pipeline because in presence of atomic loads load widening is irreversible transformation and it might hinder other optimizations.
Eventually we'd like to support folding patterns like this where the offset has a variable and a constant part:
i32 val = a[i] | (a[i + 1] << 8) | (a[i + 2] << 16) | (a[i + 3] << 24)
Matching the pattern above is easier at SelectionDAG level since address reassociation has already happened and the fact that the loads are adjacent is clear. Understanding that these loads are adjacent at IR level would have involved looking through geps/zexts/adds while looking at the addresses.
The general scheme is to match OR expressions by recursively calculating the origin of individual bytes which constitute the resulting OR value. If all the OR bytes come from memory verify that they are adjacent and match with little or big endian encoding of a wider value. If so and the load of the wider type (and bswap if needed) is allowed by the target generate a load and a bswap if needed.
Reviewed By: RKSimon, filcab, chandlerc
Differential Revision: https://reviews.llvm.org/D27861
llvm-svn: 293036
This surprisingly isn't NFC because there are patterns to select GPR
sub to SUBSWrr (rather than SUBWrr/rs); SUBS is later optimized to
SUB if NZCV is dead. From ISel's perspective, both are fine.
llvm-svn: 293010
There was a bug here where we were using p0 instead of s32 for the
selector type in the landingpad. Instead of hardcoding these types we
should get the types from the landingpad instruction directly.
Note that we replicate an assert from SDAG here to only support
two-valued landingpads.
llvm-svn: 292995
In order to follow the pattern of the existing 'slow-misaligned-128store'
option, rename the option 'no-quad-ldst-pairs' to 'slow-paired-128'.
llvm-svn: 292954
Summary:
When conditional branches with complex conditions are split into
multiple branches in SelectionDAGBuilder::FindMergedConditions, also
handle inverted conditions. These may sometimes appear without having
been optimized by InstCombine when CodeGenPrepare decides to sink and
duplicate cmp instructions, causing them to have only one use. This
problem can be increased by e.g. GVNHoist hiding more cmps from
InstCombine by combining equivalent cmps from different blocks.
For example codegen X & !(Y | Z) as:
jmp_if_X TmpBB
jmp FBB
TmpBB:
jmp_if_notY Tmp2BB
jmp FBB
Tmp2BB:
jmp_if_notZ TBB
jmp FBB
Reviewers: bogner, MatzeB, qcolombet
Subscribers: llvm-commits, hiraditya, mcrosier, sebpop
Differential Revision: https://reviews.llvm.org/D28380
llvm-svn: 292944
A register unit may be allocatable and non-reserved but some of the
register(tuples) built with it are reserved. We still need to calculate
liveness in this case.
Note to out of tree targets: If you start seeing machine verifier errors
with this commit, it probably means that you do not properly mark super
registers of reserved register as reserved. See for example r292836 or
r292870 for example on how to fix that.
rdar://29996737
Differential Revision: https://reviews.llvm.org/D28881
llvm-svn: 292871
Since we're now avoiding operations using narrow scalar integer types,
we have to legalize the integer side of the FP conversions.
This requires teaching the legalizer how to do that.
llvm-svn: 292828
Since r279760, we've been marking as legal operations on narrow integer
types that have wider legal equivalents (for instance, G_ADD s8).
Compared to legalizing these operations, this reduced the amount of
extends/truncates required, but was always a weird legalization decision
made at selection time.
So far, we haven't been able to formalize it in a way that permits the
selector generated from SelectionDAG patterns to be sufficient.
Using a wide instruction (say, s64), when a narrower instruction exists
(s32) would introduce register class incompatibilities (when one narrow
generic instruction is selected to the wider variant, but another is
selected to the narrower variant).
It's also impractical to limit which narrow operations are matched for
which instruction, as restricting "narrow selection" to ranges of types
clashes with potentially incompatible instruction predicates.
Concerns were also raised regarding MIPS64's sign-extended register
assumptions, as well as wrapping behavior.
See discussions in https://reviews.llvm.org/D26878.
Instead, legalize the operations.
Should we ever revert to selecting these narrow operations, we should
try to represent this more accurately: for instance, by separating
a "concrete" type on operations, and an "underlying" type on vregs, we
could move the "this narrow-looking op is really legal" decision to the
legalizer, and let the selector use the "underlying" vreg type only,
which would be guaranteed to map to a register class.
In any case, we eventually should mitigate:
- the performance impact by selecting no-op extract/truncates to COPYs
(which we currently do), and the COPYs to register reuses (which we
don't do yet).
- the compile-time impact by optimizing away extract/truncate sequences
in the legalizer.
llvm-svn: 292827
Kill flags need to be updated correctly when moving stores up/down to
form store pair instructions.
Those invalid flags have been ignored before but as of r290014 they are
recognized when using -mllvm -verify-machineinstrs.
Also simplifies test/CodeGen/AArch64/ldst-opt-dbg-limit.mir, renames it
to ldst-opt.mir test and adds a new tests for this change.
Differential Revision: https://reviews.llvm.org/D28875
llvm-svn: 292625
Big functions with large vreg # are quite unwieldy to update.
Change it to have one function per test (it does increase boilerplate,
but makes the core hopefully more readable and maintanable).
llvm-svn: 292552
Big functions with large vreg # are quite unwieldy to update. This test
also relied on legal s8 operations which we're considering removing.
Change it to have one function per test (it does increase boilerplate,
but makes the core hopefully more readable and maintanable), and use
100% legal operations throughout.
llvm-svn: 292551
Summary:
The SDNodeOrder is saved in the IROrder field in the SDNode, and this
field may affects scheduling. Thus, letting dbg.value/declare increase
the order numbers may in turn affect scheduling.
Because of this change we also need to update the code deciding when
dbg values should be output, in ScheduleDAGSDNodes.cpp/ProcessSDDbgValues.
Dbg values now have the same order as the SDNode they are connected to,
not the following orders.
Test cases provided by Florian Hahn.
Reviewers: bogner, aprantl, sunfish, atrick
Reviewed By: atrick
Subscribers: fhahn, probinson, andreadb, llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D25318
llvm-svn: 292485
ARM seems to prefer that long literals be formed from their little end in
order to promote the fusion of the instrs pairs MOV/MOVK and MOVK/MOVK on
Cortex A57 and others (v. "Cortex A57 Software Optimisation Guide", section
4.14).
Differential revision: https://reviews.llvm.org/D28697
llvm-svn: 292422
Some platforms (notably iOS) use a different calling convention for unnamed vs
named parameters in varargs functions, so we need to keep track of this
information when translating calls.
Since not many platforms are involved, the guts of the special handling is in
the ValueHandler class (with a generic implementation that should work for most
targets).
llvm-svn: 292283
Correctly populating Machine PHIs relies on knowing exactly how the IR level
CFG was lowered to MachineIR. This needs to be tracked by any translation
phases that meddle (currently only SwitchInst handling).
This reapplies r291973 which was reverted because of testing failures. Fixes:
+ Don't return an ArrayRef to a local temporary.
+ Incorporate Kristof's suggested comment improvements.
llvm-svn: 292278
Falkor only partially implements the ARMv8.1a extensions, so this patch
refactors the support for the SQRDML[A|S]H instruction into a separate
feature.
Differential Revision: https://reviews.llvm.org/D28681
llvm-svn: 292142
This reverts commit r291973.
The test fails in a Release build with LLVM_BUILD_GLOBAL_ISEL enabled.
AFAICT, llc segfaults. I'll add a few more details to the original
commit.
llvm-svn: 292061
Correctly populating Machine PHIs relies on knowing exactly how the IR level
CFG was lowered to MachineIR. This needs to be tracked by any translation
phases that meddle (currently only SwitchInst handling).
llvm-svn: 291973
reserved physreg in RegisterCoalescer.
Previously, we only checked for clobbers when merging into a READ of
the physreg, but not when merging from a WRITE to the physreg.
Differential Revision: https://reviews.llvm.org/D28527
llvm-svn: 291942
This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded.
This needs a simple probability check because there are some cases where it is
not profitable.
llvm-svn: 291695
When choosing the best successor for a block, ordinarily we would have preferred
a block that preserves the CFG unless there is a strong probability the other
direction. For small blocks that can be duplicated we now skip that requirement
as well.
Differential revision: https://reviews.llvm.org/D27742
llvm-svn: 291609
If a vector index is out of bounds, the result is supposed to be
undefined but is not undefined behavior. Change the legalization
for indexing the vector on the stack so that an out of bounds
index does not create an out of bounds memory access.
llvm-svn: 291604
Re-apply r288561: This time with a fix where the ADDs that are part of a
3 instruction LOH would not invalidate the "LastAdrp" state. This fixes
http://llvm.org/PR31361
Previously this pass was using up to 5% compile time in some cases which
is a bit much for what it is doing. The pass featured a full blown
data-flow analysis which in the default configuration was restricted to a
single block.
This rewrites the pass under the assumption that we only ever work on a
single block. This is done in a single pass maintaining a state machine
per general purpose register to catch LOH patterns.
Differential Revision: https://reviews.llvm.org/D27329
This reverts commit 9e6cedb0a4f14364d6511597a9160305e7d34493.
llvm-svn: 291266
Add an assert that checks whether liveins are up to date before they are
used.
- Do not print liveins into .mir files anymore in situations where they
are out of date anyway.
- The assert in the RegisterScavenger is superseded by the new one in
livein_begin().
- Skip parts of the liveness updating logic in IfConversion.cpp when
liveness isn't tracked anymore (just enough to avoid hitting the new
assert()).
Differential Revision: https://reviews.llvm.org/D27562
llvm-svn: 291169
To make this work, pointers from the MachineBasicBlock to the LLVM-IR-level
basic blocks need to be initialized, as the AsmPrinter uses this link to be
able to print out labels for the basic blocks that are address-taken.
Most of the changes in this commit are about adapting existing tests to include
the basic block name that is now printed out in the MIR format, now that the
name becomes available as the link to the LLVM-IR basic block is initialized.
The relevant test change for the functionality added in this patch are the
added "(address-taken)" strings in
test/CodeGen/AArch64/GlobalISel/arm64-irtranslator.ll.
Differential Revision: https://reviews.llvm.org/D28123
llvm-svn: 291105
This commit does this using a trivial chain of conditional branches. In the
future, we probably want to reuse the optimized switch lowering used in
SelectionDAG.
Differential Revision: https://reviews.llvm.org/D28176
llvm-svn: 291099
Summary:
When promoting fp-to-uint16 to fp-to-sint32, the result is actually zero
extended. For example, given double 65534.0, without legalization:
fp-to-uint16: 65534.0 -> 0xfffe
With the legalization:
fp-to-sint32: 65534.0 -> 0x0000fffe
Without this patch, legalization wrongly emits a signed extend assertion,
which is consumed by later icmp instruction, and cause miscompile.
Note that the floating point value must be in [0, 65535), otherwise the
behavior is undefined.
This patch reverts r279223 behavior and adds more tests and
documentations.
In PR29041's context, James Molloy mentioned that:
We don't need to mask because conversion from float->uint8_t is
undefined if the integer part of the float value is not representable in
uint8_t. Therefore we can assume this doesn't happen!
which is totally true and good, because fptoui is documented clearly to
have undefined behavior when overflow/underflow happens. We should take
the advantage of this behavior so that we can save unnecessary mask
instructions.
Reviewers: jmolloy, nadav, echristo, kbarton
Subscribers: mehdi_amini, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28284
llvm-svn: 291015
Target specific instructions have requirements that are not compatible
with what we want to test here. Namely, target specific instructions
must have their operands properly mapped on register classes.
llvm-svn: 290379
Tim Northover