Earlier BundleEntryID used to be <OffloadKind>-<Triple>-<GPUArch>.
This used to work because the clang-offload-bundler didn't need
GPUArch explicitly for any bundling/unbundling action. With
unbundleArchive it needs GPUArch to ensure compatibility between
device specific code objects. D93525 enforced triples to have
separators for all 4 components irrespective of number of
components, like "amdgcn-amd-amdhsa--". It was required to
to correctly parse a possible 4th environment component or a GPU.
But, this condition is breaking backward compatibility with
archive libraries compiled with compilers older than D93525.
This patch allows triples to have any number of components with
and without extra separator for empty environment field. Thus,
both the following bundle entry IDs are same:
openmp-amdgcn-amd-amdhsa--gfx906
openmp-amdgcn-amd-amdhsa-gfx906
Reviewed By: yaxunl, grokos
Differential Revision: https://reviews.llvm.org/D106809
Now prints the list of known archs. This requires plumbing a Driver
arg through a few functions.
Also add two more convenience insert() overlods to StringMap.
Differential Revision: https://reviews.llvm.org/D109105
The intent of this patch is to add support of -fp-model=[source|double|extended] to allow
the compiler to use a wider type for intermediate floating point calculations. As a side
effect to that, the value of FLT_EVAL_METHOD is changed according to the pragma
float_control.
Unfortunately some issue was uncovered with this change in preprocessing. See details in
https://reviews.llvm.org/D93769 . We are therefore reverting this patch until we find a way
to reconcile the value of FLT_EVAL_METHOD, the pragma and the -E flow.
This reverts commit 66ddac22e2.
This patch implements Clang support for an original OpenMP extension
we have developed to support OpenACC: the `ompx_hold` map type
modifier. The next patch in this series, D106510, implements OpenMP
runtime support.
Consider the following example:
```
#pragma omp target data map(ompx_hold, tofrom: x) // holds onto mapping of x
{
foo(); // might have map(delete: x)
#pragma omp target map(present, alloc: x) // x is guaranteed to be present
printf("%d\n", x);
}
```
The `ompx_hold` map type modifier above specifies that the `target
data` directive holds onto the mapping for `x` throughout the
associated region regardless of any `target exit data` directives
executed during the call to `foo`. Thus, the presence assertion for
`x` at the enclosed `target` construct cannot fail. (As usual, the
standard OpenMP reference count for `x` must also reach zero before
the data is unmapped.)
Justification for inclusion in Clang and LLVM's OpenMP runtime:
* The `ompx_hold` modifier supports OpenACC functionality (structured
reference count) that cannot be achieved in standard OpenMP, as of
5.1.
* The runtime implementation for `ompx_hold` (next patch) will thus be
used by Flang's OpenACC support.
* The Clang implementation for `ompx_hold` (this patch) as well as the
runtime implementation are required for the Clang OpenACC support
being developed as part of the ECP Clacc project, which translates
OpenACC to OpenMP at the directive AST level. These patches are the
first step in upstreaming OpenACC functionality from Clacc.
* The Clang implementation for `ompx_hold` is also used by the tests
in the runtime implementation. That syntactic support makes the
tests more readable than low-level runtime calls can. Moreover,
upstream Flang and Clang do not yet support OpenACC syntax
sufficiently for writing the tests.
* More generally, the Clang implementation enables a clean separation
of concerns between OpenACC and OpenMP development in LLVM. That
is, LLVM's OpenMP developers can discuss, modify, and debug LLVM's
extended OpenMP implementation and test suite without directly
considering OpenACC's language and execution model, which can be
handled by LLVM's OpenACC developers.
* OpenMP users might find the `ompx_hold` modifier useful, as in the
above example.
See new documentation introduced by this patch in `openmp/docs` for
more detail on the functionality of this extension and its
relationship with OpenACC. For example, it explains how the runtime
must support two reference counts, as specified by OpenACC.
Clang recognizes `ompx_hold` unless `-fno-openmp-extensions`, a new
command-line option introduced by this patch, is specified.
Reviewed By: ABataev, jdoerfert, protze.joachim, grokos
Differential Revision: https://reviews.llvm.org/D106509
-fstack-clash-protection was added in Clang commit e67cbac812 but was
enabled only on Linux. Allow it on FreeBSD as well, as it works fine.
Reviewed By: serge-sans-paille
Differential Revision: https://reviews.llvm.org/D108571
Previoulsy debug-info-for-profiling and pseudo-probe-for-profiling are mutual exclusive because they compete the dwarf discrimnator for callsites on the IR. This changes allows to use the two switches together. The side effect is that callsite discriminators will be taken by pseudo probe, while discriminators for other instructions are still available for AutoFDO use. This is less than ideal, however, it still allows us a chance to smoothly transition from AutoFDO to CSSPGO, by collecting both profiles from a CSSPGO binary.
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D107876
Temporary files created by the offloading device toolchain are not removed
after compilation when using a two-step compilation. The offload-bundler uses a
different filename for the device binary than the `.o` file present in the
Job's input list. This is not listed as a temporary file so it is never
removed. This patch explicitly adds the device binary as a temporary file to
consume it. This fixes PR50336.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D107668
GCC supports multiple forms of -falign-loops=.
-falign-loops= is currently ignored in Clang.
This patch implements the simplest but the most useful form where N is a
power of 2.
The underlying implementation uses a `llvm::TargetOptions` option for now.
Bitcode generation ignores this option.
Differential Revision: https://reviews.llvm.org/D106701
The declaration for the global new function in C++ is generated in the compiler front-end. When examining exception propagation, we found that this is the largest root throw site propagator requiring unwind code to be generated for callers up the stack. Allowing this to be handled immediately with termination stops upward propagation and leads to significantly less landing pads generated. This in turns leads to a performance and .text size win.
With `-fnew-infallible` this annotates the declaration with `throw()` and `__attribute__((returns_nonnull))`. `throw()` allows the compiler to assume exceptions do not propagate out of new and eliminate it as a root throw site. Note that the definition of global new is user-replaceable so users should ensure that the one used follows these semantics.
Measuring internally, we're seeing at 0.5% CPU win in one of our large internal FB workload. Measuring on clang self-build (cd0a1226b5) we get:
thinlto/
"dwarfehprepare.NumCleanupLandingPadsRemaining": 153494,
"dwarfehprepare.NumNoUnwind": 26309,
thinlto_newinfallible/
"dwarfehprepare.NumCleanupLandingPadsRemaining": 143660,
"dwarfehprepare.NumNoUnwind": 28744,
a 1-143660/153494 = 6.4% reduction in landing pads and a 28744/26309 = 9.3% increase in the number of nounwind functions.
Testing:
ninja check-all
new test case to make sure these attributes are added correctly to global new.
Reviewed By: urnathan
Differential Revision: https://reviews.llvm.org/D105225
With this patch, OpenMP on AMDGCN will use the math functions
provided by ROCm ocml library. Linking device code to the ocml will be
done in the next patch.
Reviewed By: JonChesterfield, jdoerfert, scchan
Differential Revision: https://reviews.llvm.org/D104904
Definition of `__cpp_threadsafe_static_init` macro is controlled by
language option Opts.ThreadsafeStatics. This patch sets language
option to false by default in OpenCL mode, resulting in macro
`__cpp_threadsafe_static_init` being undefined. Default value can be
overridden using command line option -fthreadsafe-statics.
Change is supposed to address portability because not all OpenCL
vendors support thread safe implementation of static initialization.
Fixes llvm.org/PR48012
Differential Revision: https://reviews.llvm.org/D107163
With this patch, OpenMP on AMDGCN will use the math functions
provided by ROCm ocml library. Linking device code to the ocml will be
done in the next patch.
Reviewed By: JonChesterfield, jdoerfert, scchan
Differential Revision: https://reviews.llvm.org/D104904
The Intel compiler ICC supports the option "-fp-model=(source|double|extended)"
which causes the compiler to use a wider type for intermediate floating point
calculations. Also supported is a way to embed this effect in the source
program with #pragma float_control(source|double|extended).
This patch extends pragma float_control syntax, and also adds support
for a new floating point option "-ffp-eval-method=(source|double|extended)".
source: intermediate results use source precision
double: intermediate results use double precision
extended: intermediate results use extended precision
Reviewed By: Aaron Ballman
Differential Revision: https://reviews.llvm.org/D93769
Change the ffp-model=precise to enables -ffp-contract=on (previously
-ffp-model=precise enabled -ffp-contract=fast). This is a follow-up
to Andy Kaylor's comments in the llvm-dev discussion "Floating Point
semantic modes". From the same email thread, I put Andy's distillation
of floating point options and floating point modes into UsersManual.rst
Also fixes bugs.llvm.org/show_bug.cgi?id=50222
I had to revert this a few times because of failures on the x86-64
buildbot but I think we finally have that fixed by LNT/79f2b03c51.
Reviewed By: rjmccall, andrew.kaylor
Differential Revision: https://reviews.llvm.org/D74436
Moving `InputInfo.h` from `lib/Driver/` into `include/Driver` to be able to expose it in an API consumed from outside of `clangDriver`.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D106787
Constructor homing reduces the amount of class type info that is emitted
by emitting conmplete type info for a class only when a constructor for
that class is emitted.
This will mainly reduce the amount of duplicate debug info in object
files. In Chrome enabling ctor homing decreased total build directory sizes
by about 30%.
It's also expected that some class types (such as unused classes)
will no longer be emitted in the debug info. This is fine, since we wouldn't
expect to need these types when debugging.
In some cases (e.g. libc++, https://reviews.llvm.org/D98750), classes
are used without calling the constructor. Since this is technically
undefined behavior, enabling constructor homing should be fine.
However Clang now has an attribute
`__attribute__((standalone_debug))` that can be used on classes to
ignore ctor homing.
Bug: https://bugs.llvm.org/show_bug.cgi?id=46537
Differential Revision: https://reviews.llvm.org/D106084
This patch adds the -fminimize-whitespace with the following effects:
* If combined with -E, remove as much non-line-breaking whitespace as
possible.
* If combined with -E -P, removes as much whitespace as possible,
including line-breaks.
The motivation is to reduce the amount of insignificant changes in the
preprocessed output with source files where only whitespace has been
changed (add/remove comments, clang-format, etc.) which is in particular
useful with ccache.
A patch for ccache for using this flag has been proposed to ccache as well:
https://github.com/ccache/ccache/pull/815, which will use
-fnormalize-whitespace when clang-13 has been detected, and additionally
uses -P in "unify_mode". ccache already had a unify_mode in an older
version which was removed because of problems that using the
preprocessor itself does not have (such that the custom tokenizer did
not recognize C++11 raw strings).
This patch slightly reorganizes which part is responsible for adding
newlines that are required for semantics. It is now either
startNewLineIfNeeded() or MoveToLine() but never both; this avoids the
ShouldUpdateCurrentLine workaround and avoids redundant lines being
inserted in some cases. It also fixes a mandatory newline not inserted
after a _Pragma("...") that is expanded into a #pragma.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D104601
This patch makes the changes in the driver that converts the medium code
model to large.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D106371
Emit the unsupported option error until the Clang's library integration support for 128-bit long double is available for AIX.
Reviewed By: Whitney, cebowleratibm
Differential Revision: https://reviews.llvm.org/D106074
Change the ffp-model=precise to enables -ffp-contract=on (previously
-ffp-model=precise enabled -ffp-contract=fast). This is a follow-up
to Andy Kaylor's comments in the llvm-dev discussion "Floating Point
semantic modes". From the same email thread, I put Andy's distillation
of floating point options and floating point modes into UsersManual.rst
Also fixes bugs.llvm.org/show_bug.cgi?id=50222
Reviewed By: rjmccall, andrew.kaylor
Differential Revision: https://reviews.llvm.org/D74436
With this patch, OpenMP on AMDGCN will use the math functions
provided by ROCm ocml library. Linking device code to the ocml will be
done in the next patch.
Reviewed By: JonChesterfield, jdoerfert, scchan
Differential Revision: https://reviews.llvm.org/D104904
The Intel compiler ICC supports the option "-fp-model=(source|double|extended)"
which causes the compiler to use a wider type for intermediate floating point
calculations. Also supported is a way to embed this effect in the source
program with #pragma float_control(source|double|extended).
This patch extends pragma float_control syntax, and also adds support
for a new floating point option "-ffp-eval-method=(source|double|extended)".
source: intermediate results use source precision
double: intermediate results use double precision
extended: intermediate results use extended precision
Reviewed By: Aaron Ballman
Differential Revision: https://reviews.llvm.org/D93769
This diff changes llvm-ifs to use unified IFS file format
and perform other renaming changes in preparation for the
merging between elfabi/ifs.
Differential Revision: https://reviews.llvm.org/D99810
Turning on -funique-internal-linkage-names when -fpseudo-probe-for-profiling is on, unless -fno-unique-internal-linkage-names is specified.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D106193
While GNU as only allows the directory form of the .file directive for DWARF v5,
the integrated assembler prefers the directory form on all DWARF versions
(-fdwarf-directory-asm).
We currently set CC1 -fno-dwarf-directory-asm for -fno-integrated-as -gdwarf-5
which may cause the directory entry 0 and the filename entry 0 to be incorrect
(see D105662 and the example below). This patch makes -fno-integrated-as -gdwarf-5 use
-fdwarf-directory-asm as well.
```
cd /tmp/c
before
% clang -g -gdwarf-5 -fno-integrated-as e/a.c -S -o - | grep '\.file.*0'
.file 0 "/tmp/c/e/a.c" md5 0x97e31cee64b4e58a4af8787512d735b6
% clang -g -gdwarf-5 -fno-integrated-as e/a.c -c
% llvm-dwarfdump a.o | grep include_directories
include_directories[ 0] = "/tmp/c/e"
after
% clang -g -gdwarf-5 -fno-integrated-as e/a.c -S -o - | grep '\.file.*0'
.file 0 "/tmp/c" "e/a.c" md5 0x97e31cee64b4e58a4af8787512d735b6
% clang -g -gdwarf-5 -fno-integrated-as e/a.c -c
% llvm-dwarfdump a.o | grep include_directories
include_directories[ 0] = "/tmp/c"
```
Reviewed By: #debug-info, dblaikie, osandov
Differential Revision: https://reviews.llvm.org/D105835
D105314 added the abibility choose to use AsmParser for parsing inline
asm. -no-intergrated-as will override this default if specified
explicitly.
If toolchain choose to use MCAsmParser for inline asm, don't pass
the option to disable integrated-as explictly unless set by user.
Reviewed By: #powerpc, shchenz
Differential Revision: https://reviews.llvm.org/D105512
We should not error out on non-x86 targets if `-fbasic-block-sections=none` is in effect.
Also, filter it out for GPU-side compilations, as we do with other options not
supported on the GPU.
Differential Revision: https://reviews.llvm.org/D105226
This patch adds a new clang builtin, __arithmetic_fence. The purpose of the
builtin is to provide the user fine control, at the expression level, over
floating point optimization when -ffast-math (-ffp-model=fast) is enabled.
The builtin prevents the optimizer from rearranging floating point expression
evaluation. The new option fprotect-parens has the same effect on
parenthesized expressions, forcing the optimizer to respect the parentheses.
Reviewed By: aaron.ballman, kpn
Differential Revision: https://reviews.llvm.org/D100118
This patch adds unbundling support of an archive file. It takes an
archive file along with a set of offload targets as input.
Output is a device specific archive for each given offload target.
Input archive contains bundled code objects bundled using
clang-offload-bundler. Each generated device specific archive contains
a set of device code object files which are named as
<Parent Bundle Name>-<CodeObject-GPUArch>.
Entries in input archive can be of any binary type which is
supported by clang-offload-bundler, like *.bc. Output archives will
contain files in same type.
Example Usuage:
clang-offload-bundler --unbundle --inputs=lib-generic.a -type=a
-targets=openmp-amdgcn-amdhsa--gfx906,openmp-amdgcn-amdhsa--gfx908
-outputs=devicelib-gfx906.a,deviceLib-gfx908.a
Reviewed By: jdoerfert, yaxunl
Differential Revision: https://reviews.llvm.org/D93525
Added the option `-altivec-src-compat=[mixed,gcc,xl]`. The default at this time is `mixed`.
The default behavior for clang is for all vector compares to return a scalar unless the vectors being
compared are vector bool or vector pixel. In that case the compare returns a
vector. With the gcc case all vector compares return vectors and in the xl case
all vector compares return scalars.
This patch does not change the default behavior of clang.
This option will be used in future patches to implement behaviour compatibility for the vector bool/pixel types.
Reviewed By: bmahjour
Differential Revision: https://reviews.llvm.org/D103615
This reverts commit c3fe847f9d.
Tests fail in non-asserts builds because they assume named IR, by the
looks of it (testing for the "entry" label, for instance). I don't know
enough about the update_cc_test_checks.py stuff to know how to manually
fix these tests, so reverting for now.
This patch adds a new clang builtin, __arithmetic_fence. The purpose of the
builtin is to provide the user fine control, at the expression level, over
floating point optimization when -ffast-math (-ffp-model=fast) is enabled.
The builtin prevents the optimizer from rearranging floating point expression
evaluation. The new option fprotect-parens has the same effect on
parenthesized expressions, forcing the optimizer to respect the parentheses.
Reviewed By: aaron.ballman, kpn
Differential Revision: https://reviews.llvm.org/D100118
Added the option `-altivec-src-compat=[mixed,gcc,xl]`. The default at this time is `mixed`.
The default behavior for clang is for all vector compares to return a scalar unless the vectors being
compared are vector bool or vector pixel. In that case the compare returns a
vector. With the gcc case all vector compares return vectors and in the xl case
all vector compares return scalars.
This patch does not change the default behavior of clang.
This option will be used in future patches to implement behaviour compatibility for the vector bool/pixel types.
Reviewed By: bmahjour
Differential Revision: https://reviews.llvm.org/D103615
When clang driver is used with -save-temps to compile OpenCL program,
clang driver first launches clang -cc1 -E to generate preprocessor expansion output,
then launches clang -cc1 with the generated preprocessor expansion output as input
to generate LLVM IR.
Currently clang by default passes "-finclude-default-header" "-fdeclare-opencl-builtins"
in both steps, which causes default header included again in the second step, which
causes error.
This patch let clang not to include default header when input type is preprocessor expansion
output, which fixes the issue.
Reviewed by: Anastasia Stulova
Differential Revision: https://reviews.llvm.org/D104800
This is mostly a mechanical change, but a testcase that contains
parts of the StringRef class (clang/test/Analysis/llvm-conventions.cpp)
isn't touched.
Only LLVM-based instrumentation profile is supported on AIX.
And it currently must be used with full LTO.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D104803
The default Altivec ABI was implemented but the clang error for specifying
its use still remains. Users could get around this but not specifying the
type of Altivec ABI but we need to remove the error.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D102094
Summary:
The changes introduced in D97680 turns this command line option into a no-op so
it can be removed entirely.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D102940
This reverts commit a1449a10db.
Seems like my changes to LNT had no effect -- puzzled.
The 21 tests pass on my sandbox with the clang patch but are
failing in exec time in the bot
This patch changes the ffp-model=precise to enables -ffp-contract=on
(previously -ffp-model=precise enabled -ffp-contract=fast). This is a
follow-up to Andy Kaylor's comments in the llvm-dev discussion
"Floating Point semantic modes". From the same email thread, I put
Andy's distillation of floating point options and floating point modes
into UsersManual.rst
Differential Revision: https://reviews.llvm.org/D74436
Support -Wno-frame-larger-than (with no =) and make it properly
interoperate with -Wframe-larger-than. Reject -Wframe-larger-than with
no argument.
We continue to support Clang's old spelling, -Wframe-larger-than=, for
compatibility with existing users of that facility.
In passing, stop the driver from accepting and ignoring
-fwarn-stack-size and make it a cc1-only flag as intended.
-Wframe-larger-than= is an interesting warning; we can't know the frame
size until PrologueEpilogueInsertion (PEI); very late in the compilation
pipeline.
-Wframe-larger-than= was propagated through CC1 as an -mllvm flag, then
was a cl::opt in LLVM's PEI pass; this meant it was dropped during LTO
and needed to be re-specified via -plugin-opt.
Instead, make it part of the IR proper as a module level attribute,
similar to D103048. Introduce -fwarn-stack-size CC1 option.
Reviewed By: rsmith, qcolombet
Differential Revision: https://reviews.llvm.org/D103928
This patch adds the command line option -foperator-names which acts as the opposite of -fno-operator-names. With this command line option it is possible to reenable C++ operator keywords on the command line if -fno-operator-names had previously been passed.
Differential Revision: https://reviews.llvm.org/D103749
This patch changes the ffp-model=precise to enables -ffp-contract=on
(previously -ffp-model=precise enabled -ffp-contract=fast). This is a
follow-up to Andy Kaylor's comments in the llvm-dev discussion
"Floating Point semantic modes". From the same email thread, I put
Andy's distillation of floating point options and floating point modes
into UsersManual.rst
Differential Revision: https://reviews.llvm.org/D74436
This fixed PR#48894 for AArch64. The issue has been fixed for Arm in
https://reviews.llvm.org/D95872
The following rules apply to -Wa,-march with this change:
- Only compiler options apply to non assembly files
- Compiler and assembler options apply to assembly files
- For assembly files, we prefer the assembler option(s) if we have both kinds of option
- Of the options that apply (or are preferred), the last value wins (it's not additive)
Reviewed By: DavidSpickett, nickdesaulniers
Differential Revision: https://reviews.llvm.org/D103184
This patch fixes a Windows -EHa crash induced by previous commit 797ad70152.
The crash was caused by "LifetimeMarker" scope (with option -O2) that should not be considered as SEH Scope.
This change also turns off -fasync-exceptions by default under -EHa option for now.
Differential Revision: https://reviews.llvm.org/D103664#2799944
A recent change (D99683) to support ThinLTO for HIP caused a regression
when compiling cuda code with -flto=thin -fwhole-program-vtables.
Specifically, we now get an error:
error: invalid argument '-fwhole-program-vtables' only allowed with '-flto'
This error is coming from the device offload cc1 action being set up for
the cuda compile, for which -flto=thin doesn't apply and gets dropped.
This is a regression, but points to a potential issue that was silently
occurring before the patch, details below.
Before D99683, the check for fwhole-program-vtables in the driver looked
like:
if (WholeProgramVTables) {
if (!D.isUsingLTO())
D.Diag(diag::err_drv_argument_only_allowed_with)
<< "-fwhole-program-vtables"
<< "-flto";
CmdArgs.push_back("-fwhole-program-vtables");
}
And D.isUsingLTO() returned true since we have -flto=thin. However,
because the cuda cc1 compile is doing device offloading, which didn't
support any LTO, there was other code that suppressed -flto* options
from being passed to the cc1 invocation. So the cc1 invocation silently
had -fwhole-program-vtables without any -flto*. This seems potentially
problematic, since if we had any virtual calls we would get type test
assume sequences without the corresponding LTO pass that handles them.
However, with the patch, which adds support for device offloading LTO
option -foffload-lto=thin, the code has changed so that we set a bool
IsUsingLTO based on either -flto* or -foffload-lto*, depending on
whether this is the device offloading action. For the device offload
action in our compile, since we don't have -foffload-lto, IsUsingLTO is
false, and the check for LTO with -fwhole-program-vtables now fails.
What we should do is only pass through -fwhole-program-vtables to the
cc1 invocation that has LTO enabled (either the device offload action
with -foffload-lto, or the non-device offload action with -flto), and
otherwise drop the -fwhole-program-vtables for the non-LTO action.
Then we should error only if we have -fwhole-program-vtables without any
-f*lto* options.
Differential Revision: https://reviews.llvm.org/D103579
All fuchsia targets will now use the relative-vtables ABI by default.
Also remove -fexperimental-relative-c++-abi-vtables from test RUNs targeting fuchsia.
Differential Revision: https://reviews.llvm.org/D102374
VS 2019 16.11 (just released in Preview) is adding support for the
/std:c++20 option and bumping /std:c++latest to "post-c++20". This
updates clang-cl to match.
Differential revision: https://reviews.llvm.org/D103155
Since 4468e5b899 clang will prefer
the last one it finds of "-mimplicit-it" or "-Wa,-mimplicit-it".
Due to a mistake in that patch the compiler argument "-mimplicit-it"
was never marked as used, even if it was the last one and was passed
to llvm.
Move the Claim call back to the start of the loop and update
the testing to check we don't get any unused argument warnings.
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D103086
Add options -[no-]offload-lto and -foffload-lto=[thin,full] for controlling
LTO for offload compilation. Allow LTO for AMDGPU target.
AMDGPU target does not support codegen of object files containing
call of external functions, therefore the LLVM module passed to
AMDGPU backend needs to contain definitions of all the callees.
An LLVM option is added to allow function importer to import
functions with noinline attribute.
HIP toolchain passes proper LLVM options to lld to make sure
function importer imports definitions of all the callees.
Reviewed by: Teresa Johnson, Artem Belevich
Differential Revision: https://reviews.llvm.org/D99683
If multiple instances of the -arm-implicit-it option is passed to
the backend, it errors out.
Also fix cases where there are multiple -Wa,-mimplicit-it; the existing
tests indicate that the last one specified takes effect, while in
practice it passed double options, which didn't work as intended.
Differential Revision: https://reviews.llvm.org/D102812
Instead of ignoring flto=auto and -flto=jobserver, treat them as -flto
and pass -flto=full along.
Differential Revision: https://reviews.llvm.org/D102479
This reverts commit 2919222d80.
That commit broke backwards compatibility. Additionally, the
replacement, -Wa,-mimplicit-it, isn't yet supported by any stable
release of Clang.
See D102812 for a fix for the error cases when callers specify both
-mimplicit-it and -Wa,-mimplicit-it.
This is a GNU as and Clang cc1as option, not a GCC option.
Users should specify `-Wa,-mimplicit-it=` instead.
Note: mixing the -m option and the -Wa, option doesn't work
`-Wa,-mimplicit-it=never -mimplicit-it=always` =>
`clang (LLVM option parsing): for the --arm-implicit-it option: may only occur zero or one times!`
Reviewed By: nickdesaulniers, raj.khem
Differential Revision: https://reviews.llvm.org/D102568
Currently, we have support for SYCL 1.2.1 (also known as SYCL 2017).
This patch introduces the start of support for SYCL 2020 mode, which is
the latest SYCL standard available at (https://www.khronos.org/registry/SYCL/specs/sycl-2020/html/sycl-2020.html).
This sets the default SYCL to be 2020 in the driver, and introduces the
notion of a "default" version (set to 2020) when cc1 is in SYCL mode
but there was no explicit -sycl-std= specified on the command line.
This patch is the Part-1 (FE Clang) implementation of HW Exception handling.
This new feature adds the support of Hardware Exception for Microsoft Windows
SEH (Structured Exception Handling).
This is the first step of this project; only X86_64 target is enabled in this patch.
Compiler options:
For clang-cl.exe, the option is -EHa, the same as MSVC.
For clang.exe, the extra option is -fasync-exceptions,
plus -triple x86_64-windows -fexceptions and -fcxx-exceptions as usual.
NOTE:: Without the -EHa or -fasync-exceptions, this patch is a NO-DIFF change.
The rules for C code:
For C-code, one way (MSVC approach) to achieve SEH -EHa semantic is to follow
three rules:
* First, no exception can move in or out of _try region., i.e., no "potential
faulty instruction can be moved across _try boundary.
* Second, the order of exceptions for instructions 'directly' under a _try
must be preserved (not applied to those in callees).
* Finally, global states (local/global/heap variables) that can be read
outside of _try region must be updated in memory (not just in register)
before the subsequent exception occurs.
The impact to C++ code:
Although SEH is a feature for C code, -EHa does have a profound effect on C++
side. When a C++ function (in the same compilation unit with option -EHa ) is
called by a SEH C function, a hardware exception occurs in C++ code can also
be handled properly by an upstream SEH _try-handler or a C++ catch(...).
As such, when that happens in the middle of an object's life scope, the dtor
must be invoked the same way as C++ Synchronous Exception during unwinding
process.
Design:
A natural way to achieve the rules above in LLVM today is to allow an EH edge
added on memory/computation instruction (previous iload/istore idea) so that
exception path is modeled in Flow graph preciously. However, tracking every
single memory instruction and potential faulty instruction can create many
Invokes, complicate flow graph and possibly result in negative performance
impact for downstream optimization and code generation. Making all
optimizations be aware of the new semantic is also substantial.
This design does not intend to model exception path at instruction level.
Instead, the proposed design tracks and reports EH state at BLOCK-level to
reduce the complexity of flow graph and minimize the performance-impact on CPP
code under -EHa option.
One key element of this design is the ability to compute State number at
block-level. Our algorithm is based on the following rationales:
A _try scope is always a SEME (Single Entry Multiple Exits) region as jumping
into a _try is not allowed. The single entry must start with a seh_try_begin()
invoke with a correct State number that is the initial state of the SEME.
Through control-flow, state number is propagated into all blocks. Side exits
marked by seh_try_end() will unwind to parent state based on existing
SEHUnwindMap[].
Note side exits can ONLY jump into parent scopes (lower state number).
Thus, when a block succeeds various states from its predecessors, the lowest
State triumphs others. If some exits flow to unreachable, propagation on those
paths terminate, not affecting remaining blocks.
For CPP code, object lifetime region is usually a SEME as SEH _try.
However there is one rare exception: jumping into a lifetime that has Dtor but
has no Ctor is warned, but allowed:
Warning: jump bypasses variable with a non-trivial destructor
In that case, the region is actually a MEME (multiple entry multiple exits).
Our solution is to inject a eha_scope_begin() invoke in the side entry block to
ensure a correct State.
Implementation:
Part-1: Clang implementation described below.
Two intrinsic are created to track CPP object scopes; eha_scope_begin() and eha_scope_end().
_scope_begin() is immediately added after ctor() is called and EHStack is pushed.
So it must be an invoke, not a call. With that it's also guaranteed an
EH-cleanup-pad is created regardless whether there exists a call in this scope.
_scope_end is added before dtor(). These two intrinsics make the computation of
Block-State possible in downstream code gen pass, even in the presence of
ctor/dtor inlining.
Two intrinsic, seh_try_begin() and seh_try_end(), are added for C-code to mark
_try boundary and to prevent from exceptions being moved across _try boundary.
All memory instructions inside a _try are considered as 'volatile' to assure
2nd and 3rd rules for C-code above. This is a little sub-optimized. But it's
acceptable as the amount of code directly under _try is very small.
Part-2 (will be in Part-2 patch): LLVM implementation described below.
For both C++ & C-code, the state of each block is computed at the same place in
BE (WinEHPreparing pass) where all other EH tables/maps are calculated.
In addition to _scope_begin & _scope_end, the computation of block state also
rely on the existing State tracking code (UnwindMap and InvokeStateMap).
For both C++ & C-code, the state of each block with potential trap instruction
is marked and reported in DAG Instruction Selection pass, the same place where
the state for -EHsc (synchronous exceptions) is done.
If the first instruction in a reported block scope can trap, a Nop is injected
before this instruction. This nop is needed to accommodate LLVM Windows EH
implementation, in which the address in IPToState table is offset by +1.
(note the purpose of that is to ensure the return address of a call is in the
same scope as the call address.
The handler for catch(...) for -EHa must handle HW exception. So it is
'adjective' flag is reset (it cannot be IsStdDotDot (0x40) that only catches
C++ exceptions).
Suppress push/popTerminate() scope (from noexcept/noTHrow) so that HW
exceptions can be passed through.
Original llvm-dev [RFC] discussions can be found in these two threads below:
https://lists.llvm.org/pipermail/llvm-dev/2020-March/140541.htmlhttps://lists.llvm.org/pipermail/llvm-dev/2020-April/141338.html
Differential Revision: https://reviews.llvm.org/D80344/new/
Follow up to D88631 but for aarch64; the Linux kernel uses the command
line flags:
1. -mstack-protector-guard=sysreg
2. -mstack-protector-guard-reg=sp_el0
3. -mstack-protector-guard-offset=0
to use the system register sp_el0 for the stack canary, enabling the
kernel to have a unique stack canary per task (like a thread, but not
limited to userspace as the kernel can preempt itself).
Address pr/47341 for aarch64.
Fixes: https://github.com/ClangBuiltLinux/linux/issues/289
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed By: xiangzhangllvm, DavidSpickett, dmgreen
Differential Revision: https://reviews.llvm.org/D100919
This patch adds support for GCC's -fstack-usage flag. With this flag, a stack
usage file (i.e., .su file) is generated for each input source file. The format
of the stack usage file is also similar to what is used by GCC. For each
function defined in the source file, a line with the following information is
produced in the .su file.
<source_file>:<line_number>:<function_name> <size_in_byte> <static/dynamic>
"Static" means that the function's frame size is static and the size info is an
accurate reflection of the frame size. While "dynamic" means the function's
frame size can only be determined at run-time because the function manipulates
the stack dynamically (e.g., due to variable size objects). The size info only
reflects the size of the fixed size frame objects in this case and therefore is
not a reliable measure of the total frame size.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D100509
Previously clang would print a binary blob into the bundled file
for amdgcn. With this patch, it will instead print textual IR as
expected.
Reviewed By: JonChesterfield, ronlieb
Differential Revision: https://reviews.llvm.org/D102065
Change-Id: I10c0127ab7357787769fdf9a2edd4b3071e790a1
-fno-semantic-interposition (only effective with -fpic) can optimize default
visibility external linkage (non-ifunc-non-COMDAT) variable access and function
calls to avoid GOT/PLT, by using local aliases, e.g.
```
int var;
__attribute__((optnone)) int fun(int x) { return x * x; }
int test() { return fun(var); }
```
-fpic (var and fun are dso_preemptable)
```
test:
.LBB1_1:
auipc a0, %got_pcrel_hi(var)
ld a0, %pcrel_lo(.LBB1_1)(a0)
lw a0, 0(a0)
// fun is preemptible by default in ld -shared mode. ld will create a PLT.
tail fun@plt
```
vs -fpic -fno-semantic-interposition (var and fun are dso_local)
```
test:
.Ltest$local:
.LBB1_1:
auipc a0, %pcrel_hi(.Lvar$local)
addi a0, a0, %pcrel_lo(.LBB1_1)
lw a0, 0(a0)
// The assembler either resolves .Lfun$local at assembly time (-mno-relax
// -fno-function-sections), or produces a relocation referencing a non-preemptible
// local symbol (which can avoid PLT).
tail .Lfun$local
```
Note: Clang's default -fpic is more aggressive than GCC -fpic: interprocedural
optimizations (including inlining) are available but local aliases are not used.
-fpic -fsemantic-interposition can disable interprocedural optimizations.
Depends on D101875
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D101876
-fno-semantic-interposition (only effective with -fpic) can optimize default
visibility external linkage (non-ifunc-non-COMDAT) variable access and function
calls to avoid GOT/PLT, by using local aliases, e.g.
```
int var;
__attribute__((optnone)) int fun(int x) { return x * x; }
int test() { return fun(var); }
```
-fpic (var and fun are dso_preemptable)
```
test: // @test
adrp x8, :got:var
ldr x8, [x8, :got_lo12:var]
ldr w0, [x8]
// fun is preemptible by default in ld -shared mode. ld will create a PLT.
b fun
```
vs -fpic -fno-semantic-interposition (var and fun are dso_local)
```
test: // @test
.Ltest$local:
adrp x8, .Lvar$local
ldr w0, [x8, :lo12:.Lvar$local]
// The assembler either resolves .Lfun$local at assembly time, or produces a
// relocation referencing a non-preemptible section symbol (which can avoid PLT).
b .Lfun$local
```
Note: Clang's default -fpic is more aggressive than GCC -fpic: interprocedural
optimizations (including inlining) are available but local aliases are not used.
-fpic -fsemantic-interposition can disable interprocedural optimizations.
Depends on D101872
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D101873
Previously clang would print a binary blob into the bundled file
for amdgcn. With this patch, it will instead print textual IR as
expected.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D102065
This implements the flag proposed in RFC
http://lists.llvm.org/pipermail/cfe-dev/2020-August/066437.html.
The goal is to add a way to override the default target C++ ABI through a
compiler flag. This makes it easier to test and transition between different
C++ ABIs through compile flags rather than build flags.
In this patch:
- Store -fc++-abi= in a LangOpt. This isn't stored in a CodeGenOpt because
there are instances outside of codegen where Clang needs to know what the
ABI is (particularly through ASTContext::createCXXABI), and we should be
able to override the target default if the flag is provided at that point.
- Expose the existing ABIs in TargetCXXABI as values that can be passed
through this flag.
- Create a .def file for these ABIs to make it easier to check flag values.
- Add an error for diagnosing bad ABI flag values.
Differential Revision: https://reviews.llvm.org/D85802
GCC supports negative values for -mstack-protector-guard-offset=, this
should be a signed value. Pre-req to D100919.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101325
[clang][amdgpu] Use implicit code object version
At present, clang always passes amdhsa-code-object-version on to -cc1. That is
great for certainty over what object version is being used when debugging.
Unfortunately, the command line argument is in AMDGPUBaseInfo.cpp in the amdgpu
target. If clang is used with an llvm compiled with DLLVM_TARGETS_TO_BUILD
that excludes amdgpu, this will be diagnosed (as discovered via D98658):
- Unknown command line argument '--amdhsa-code-object-version=4'
This means that clang, built only for X86, can be used to compile the nvptx
devicertl for openmp but not the amdgpu one. That would shortly spawn fragile
logic in the devicertl cmake to try to guess whether the clang used will work.
This change omits the amdhsa-code-object-version parameter when it matches the
default that AMDGPUBaseInfo.cpp specifies, with a comment to indicate why. As
this is the only part of clang's codegen for amdgpu that depends on the target
in the back end it suffices to build the openmp runtime on most (all?) systems.
It is a non-functional change, though observable in the updated tests and when
compiling with -###. It may cause minor disruption to the amd-stg-open branch.
Revision of D98746, builds on refactor in D101077
Reviewed By: yaxunl
Differential Revision: https://reviews.llvm.org/D101095
[clang][nfc] Split getOrCheckAMDGPUCodeObjectVersion
Separates detection of deprecated or invalid code object version from
returning the version. Written to avoid any behaviour change.
Precursor to a revision of D98746.
Reviewed By: yaxunl
Differential Revision: https://reviews.llvm.org/D101077
This is a user-facing option, so it doesn't make sense for it to be cc1
only.
Follow-up to D100420
Differential revision: https://reviews.llvm.org/D100759
This allows frontend and backend diagnostic files to all go into the
same place. Have it control the Windows (mini-)dump location.
Differential Revision: https://reviews.llvm.org/D99199
Programmers would like to be able to test direct methods by calling them from a
different linkage unit or mocking them, both of which are impossible. This
patch adds a flag that effectively disables the attribute, which will fix this
when enabled in testable builds. rdar://71190891
Differential revision: https://reviews.llvm.org/D95845
Problem:
On SystemZ we need to open text files in text mode. On Windows, files opened in text mode adds a CRLF '\r\n' which may not be desirable.
Solution:
This patch adds two new flags
- OF_CRLF which indicates that CRLF translation is used.
- OF_TextWithCRLF = OF_Text | OF_CRLF indicates that the file is text and uses CRLF translation.
Developers should now use either the OF_Text or OF_TextWithCRLF for text files and OF_None for binary files. If the developer doesn't want carriage returns on Windows, they should use OF_Text, if they do want carriage returns on Windows, they should use OF_TextWithCRLF.
So this is the behaviour per platform with my patch:
z/OS:
OF_None: open in binary mode
OF_Text : open in text mode
OF_TextWithCRLF: open in text mode
Windows:
OF_None: open file with no carriage return
OF_Text: open file with no carriage return
OF_TextWithCRLF: open file with carriage return
The Major change is in llvm/lib/Support/Windows/Path.inc to only set text mode if the OF_CRLF is set.
```
if (Flags & OF_CRLF)
CrtOpenFlags |= _O_TEXT;
```
These following files are the ones that still use OF_Text which I left unchanged. I modified all these except raw_ostream.cpp in recent patches so I know these were previously in Binary mode on Windows.
./llvm/lib/Support/raw_ostream.cpp
./llvm/lib/TableGen/Main.cpp
./llvm/tools/dsymutil/DwarfLinkerForBinary.cpp
./llvm/unittests/Support/Path.cpp
./clang/lib/StaticAnalyzer/Core/HTMLDiagnostics.cpp
./clang/lib/Frontend/CompilerInstance.cpp
./clang/lib/Driver/Driver.cpp
./clang/lib/Driver/ToolChains/Clang.cpp
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99426
In order to bring up scalable vector support in LLVM incrementally,
we introduced behaviour to emit a warning, instead of an error, when
asking the wrong question of a scalable vector, like asking for the
fixed number of elements.
This patch puts that behaviour under a flag. The default behaviour is
that the compiler will always error, which means that all LLVM unit
tests and regression tests will now fail when a code-path is taken that
still uses the wrong interface.
The behaviour to demote an error to a warning can be individually enabled
for tools that want to support experimental use of scalable vectors.
This patch enables that behaviour when driving compilation from Clang.
This means that for users who want to try out scalable-vector support,
fixed-width codegen support, or build user-code with scalable vector
intrinsics, Clang will not crash and burn when the compiler encounters
such a case.
This allows us to do away with the following pattern in many of the SVE tests:
RUN: .... 2>%t
RUN: cat %t | FileCheck --check-prefix=WARN
WARN-NOT: warning: ...
The behaviour to emit warnings is only temporary and we expect this flag
to be removed in the future when scalable vector support is more stable.
This patch also has fixes the following tests:
unittests:
ScalableVectorMVTsTest.SizeQueries
SelectionDAGAddressAnalysisTest.unknownSizeFrameObjects
AArch64SelectionDAGTest.computeKnownBitsSVE_ZERO_EXTEND_VECTOR_INREG
regression tests:
Transforms/InstCombine/vscale_gep.ll
Reviewed By: paulwalker-arm, ctetreau
Differential Revision: https://reviews.llvm.org/D98856
For DBX, it does not handle column info well. Set -gno-column-info
by default for DBX.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D99703
Based on this debugger type, for now, we plan to:
1: use inline string by default for XCOFF DWARF
2: generate no column info for debug line table.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D99400
The contents of the string returned by getenv() is not guaranteed across calls to getenv(). The code to handle the CC_PRINT etc env vars calls getenv() and saves the results in just a char *. The string returned by getenv() needs to be copied and saved. Switching the type of the strings from char * to std::string will do this and manage the alloated memory.
Differential Revision: https://reviews.llvm.org/D98554
Summary: Add -fno-split-stack and rename CC1 option from `-split-stacks`
to `-fsplit-stack`.
Test Plan: check-all
Differential Revision: https://reviews.llvm.org/D99245
This patch sets the OF_Text flag correctly for the json file created in Clang::DumpCompilationDatabaseFragmentToDir.
Reviewed By: amccarth
Differential Revision: https://reviews.llvm.org/D99200
SYCL compilations initiated by the driver will spawn off one or more
frontend compilation jobs (one for device and one for host). This patch
reworks the driver options to make upstreaming this from the downstream
SYCL fork easier.
This patch introduces a language option to identify host executions
(SYCLIsHost) and a -cc1 frontend option to enable this mode. -fsycl and
-fno-sycl become driver-only options that are rejected when passed to
-cc1. This is because the frontend and beyond should be looking at
whether the user is doing a device or host compilation specifically.
Because the frontend should only ever be in one mode or the other,
-fsycl-is-device and -fsycl-is-host are mutually exclusive options.
Initially, this flag was meant to only be used through cc1 and not directly
through the clang driver. However, we accidentally ended up using this flag
as a driver flag already for selecting multilibs within the fuchsia toolchain.
We're currently in an awkward state where it's only accepted as a driver flag
when targeting Fuchsia, and all other instances it can only be added via
-Xclang. Since we're ready to use this in Fuchsia, we can just expose this to
the driver for simplicity.
Differential Revision: https://reviews.llvm.org/D98375
In -fno-exceptions -fno-asynchronous-unwind-tables -g0 mode,
GCC does not emit `.cfi_*` directives.
```
% diff <(gcc -fno-asynchronous-unwind-tables -dM -E a.c) <(gcc -dM -E a.c)
130a131
> #define __GCC_HAVE_DWARF2_CFI_ASM 1
```
This macro is useful because code can decide whether inline asm should include `.cfi_*` directives.
`.cfi_*` directives without `.cfi_startproc` can cause assembler errors
(integrated assembler: `this directive must appear between .cfi_startproc and .cfi_endproc directives`).
Differential Revision: https://reviews.llvm.org/D97743
A bug was introduced when adding -munsafe-fp-atomics.
By default it should be off.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D97967
Like nvptx and some other targets, -mconstructor-aliases does not work well with amdgpu,
therefore we disable it in the same approach.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D97959
This makes CC1 and driver defaults consistent.
In addition, for more common cases (-g is specified without -gsplit-dwarf), users will not see -fno-split-dwarf-inlining in CC1 options.
Verified that the below is still true:
* `clang -g` => `splitDebugInlining: false` in DICompileUnit
* `clang -g -gsplit-dwarf` => `splitDebugInlining: false` in DICompileUnit
* `clang -g -gsplit-dwarf -fsplit-dwarf-inlining` => no `splitDebugInlining: false`
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D97706
These flags affect coverage mapping (-fcoverage-mapping), not
-fprofile-[instr-]generate so it makes more sense to use the
-fcoverage-* prefix.
Differential Revision: https://reviews.llvm.org/D97434
We introduce -ffile-compilation-dir shorthand to avoid having to set
-fdebug-compilation-dir and -fprofile-compilation-dir separately. This
is similar to -ffile-prefix-map.
Differential Revision: https://reviews.llvm.org/D97433
This change enables the builtin function declarations
in clang driver by default using the Tablegen solution
along with the implicit include of 'opencl-c-base.h'
header.
A new flag '-cl-no-stdinc' disabling all default
declarations and header includes is added. If any other
mechanisms were used to include the declarations (e.g.
with -Xclang -finclude-default-header) and the new default
approach is not sufficient the, `-cl-no-stdinc` flag has
to be used with clang to activate the old behavior.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D96515
This patch moves the creation of the '-Wspir-compat' argument from cc1 to the driver.
Without this change, generating command line arguments from `CompilerInvocation` cannot be done reliably: there's no way to distinguish whether '-Wspir-compat' was passed to cc1 on the command line (should be generated), or if it was created within `CompilerInvocation::CreateFromArgs` (should not be generated).
This is also in line with how other '-W' flags are handled.
(This was introduced in D21567.)
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D97041
We currently always store absolute filenames in coverage mapping. This
is problematic for several reasons. It poses a problem for distributed
compilation as source location might vary across machines. We are also
duplicating the path prefix potentially wasting space.
This change modifies how we store filenames in coverage mapping. Rather
than absolute paths, it stores the compilation directory and file paths
as given to the compiler, either relative or absolute. Later when
reading the coverage mapping information, we recombine relative paths
with the working directory. This approach is similar to handling
ofDW_AT_comp_dir in DWARF.
Finally, we also provide a new option, -fprofile-compilation-dir akin
to -fdebug-compilation-dir which can be used to manually override the
compilation directory which is useful in distributed compilation cases.
Differential Revision: https://reviews.llvm.org/D95753
We currently always store absolute filenames in coverage mapping. This
is problematic for several reasons. It poses a problem for distributed
compilation as source location might vary across machines. We are also
duplicating the path prefix potentially wasting space.
This change modifies how we store filenames in coverage mapping. Rather
than absolute paths, it stores the compilation directory and file paths
as given to the compiler, either relative or absolute. Later when
reading the coverage mapping information, we recombine relative paths
with the working directory. This approach is similar to handling
ofDW_AT_comp_dir in DWARF.
Finally, we also provide a new option, -fprofile-compilation-dir akin
to -fdebug-compilation-dir which can be used to manually override the
compilation directory which is useful in distributed compilation cases.
Differential Revision: https://reviews.llvm.org/D95753
would otherwise include template specialization types
This helps reduce the size of the encoded C++ type strings in the binary.
This is enabled by default only on Darwin, but can be enabled/disabled
via command line options.
rdar://63288571
Differential Revision: https://reviews.llvm.org/D96816
The following commits added commandline arguments to control following the Arm
Procedure Call Standard for certain volatile bitfield operations:
- https://reviews.llvm.org/D67399
- https://reviews.llvm.org/D72932
This commit fixes the oversight that these args weren't passed from the driver
to cc1 if appropriate.
Where *appropriate* means:
- `-faapcs-bitfield-width`: is the default, so won't be passed
- `-fno-aapcs-bitfield-width`: should be passed
- `-faapcs-bitfield-load`: should be passed
Differential Revision: https://reviews.llvm.org/D96784
This fixes an issue when "-gdwarf-N" switch was ignored if it was given
before another debug option.
Differential Revision: https://reviews.llvm.org/D96865
Drop the `Separate` form of `-fmodule-name X`, `-fprofile-remapping-file X`, and `-frewrite-map-file X`.
To the best of my knowledge they are not used. Their conventional Joined forms (`-fFOO=`) should be used instead.
`-fdebug-compilation-dir X` is used in several places, e.g. chromium/infra/goma.
It is also advertised in http://blog.llvm.org/2019/11/deterministic-builds-with-clang-and-lld.html
So we keep it but make the EQ form canonical and the Separate form an alias.
Differential Revision: https://reviews.llvm.org/D96886
The option was added in D90507 for C/C++ source files. This patch adds
support for assembly files.
Differential Revision: https://reviews.llvm.org/D96783
This patch adds 2 new options to control when Clang adds `mustprogress`:
1. -ffinite-loops: assume all loops are finite; mustprogress is added
to all loops, regardless of the selected language standard.
2. -fno-finite-loops: assume no loop is finite; mustprogress is not
added to any loop or function. We could add mustprogress to
functions without loops, but we would have to detect that in Clang,
which is probably not worth it.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D96419
After D93264, using both -fdebug-info-for-profiling and
-fpseudo-probe-for-profiling will cause the compiler to crash.
Diagnose these conflicting options in the driver.
Also, the existing CodeGen test was using the driver when it should be
running cc1.
Differential Revision: https://reviews.llvm.org/D96354
This patch added a distinct CUID for each input file, which is represented by InputAction.
clang initially creates an InputAction for each input file for the host compilation. In CUDA/HIP action
builder, each InputAction is given a CUID and cloned for each GPU arch, and the CUID is also cloned. In this way,
we guarantee the corresponding device and host compilation for the same file shared the
same CUID. On the other hand, different compilation units have different CUID.
-fuse-cuid=random|hash|none is added to control the method to generate CUID. The default
is hash. -cuid=X is also added to specify CUID explicitly, which overrides -fuse-cuid.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D95007
Currently -fgpu-rdc is not passed to host clang -cc1.
This causes issue because -fgpu-rdc affects shadow
variable linkage in host compilation.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D96105
Generate outline atomics if compiling for armv8-a non-LSE AArch64 Linux
(including Android) targets to use LSE instructions, if they are available,
at runtime. Library support is checked by clang driver which doesn't enable
outline atomics if no proper libraries (libgcc >= 9.3.1 or compiler-rt) found.
Differential Revision: https://reviews.llvm.org/D93585
clang-cl already defaults to C17 for .c files, but no harm
in accepting these flags. Fixes PR48185.
Differential Revision: https://reviews.llvm.org/D95575
This change implements support for applying profile instrumentation
only to selected files or functions. The implementation uses the
sanitizer special case list format to select which files and functions
to instrument, and relies on the new noprofile IR attribute to exclude
functions from instrumentation.
Differential Revision: https://reviews.llvm.org/D94820
There are two use cases.
Assembler
We have accrued some code gated on MCAsmInfo::useIntegratedAssembler(). Some
features are supported by latest GNU as, but we have to use
MCAsmInfo::useIntegratedAs() because the newer versions have not been widely
adopted (e.g. SHF_LINK_ORDER 'o' and 'unique' linkage in 2.35, --compress-debug-sections= in 2.26).
Linker
We want to use features supported only by LLD or very new GNU ld, or don't want
to work around older GNU ld. We currently can't represent that "we don't care
about old GNU ld". You can find such workarounds in a few other places, e.g.
Mips/MipsAsmprinter.cpp PowerPC/PPCTOCRegDeps.cpp X86/X86MCInstrLower.cpp
AArch64 TLS workaround for R_AARCH64_TLSLD_MOVW_DTPREL_* (PR ld/18276),
R_AARCH64_TLSLE_LDST8_TPREL_LO12 (https://bugs.llvm.org/show_bug.cgi?id=36727https://sourceware.org/bugzilla/show_bug.cgi?id=22969)
Mixed SHF_LINK_ORDER and non-SHF_LINK_ORDER components (supported by LLD in D84001;
GNU ld feature request https://sourceware.org/bugzilla/show_bug.cgi?id=16833 may take a while before available).
This feature allows to garbage collect some unused sections (e.g. fragmented .gcc_except_table).
This patch adds `-fbinutils-version=` to clang and `-binutils-version` to llc.
It changes one codegen place in SHF_MERGE to demonstrate its usage.
`-fbinutils-version=2.35` means the produced object file does not care about GNU
ld<2.35 compatibility. When `-fno-integrated-as` is specified, the produced
assembly can be consumed by GNU as>=2.35, but older versions may not work.
`-fbinutils-version=none` means that we can use all ELF features, regardless of
GNU as/ld support.
Both clang and llc need `parseBinutilsVersion`. Such command line parsing is
usually implemented in `llvm/lib/CodeGen/CommandFlags.cpp` (LLVMCodeGen),
however, ClangCodeGen does not depend on LLVMCodeGen. So I add
`parseBinutilsVersion` to `llvm/lib/Target/TargetMachine.cpp` (LLVMTarget).
Differential Revision: https://reviews.llvm.org/D85474
This change implements support for applying profile instrumentation
only to selected files or functions. The implementation uses the
sanitizer special case list format to select which files and functions
to instrument, and relies on the new noprofile IR attribute to exclude
functions from instrumentation.
Differential Revision: https://reviews.llvm.org/D94820
The previous implementation required that `-maltivec` be specified when using either `-mabi=vec-extabi` or `-mabi=vec-default`, this patch removes that requirement.
Reviewed By: cebowleratibm
Differential Revision: https://reviews.llvm.org/D94986
This generalizes D94647 to IR input, as suggested by @tejohnson.
Ideally the driver should just forward split dwarf options, but doing this currently will cause `clang -gsplit-dwarf -c a.c` to create a .dwo with just `.strtab`.
Reviewed By: dblaikie, tejohnson
Differential Revision: https://reviews.llvm.org/D94655
-g is an IR generation option while -gsplit-dwarf is an object file generation option.
For -gsplit-dwarf in the backend phase of a distributed ThinLTO (-fthinlto-index=) which does object file generation and no IR generation, -g should not be needed.
This patch makes `-fthinlto-index= -gsplit-dwarf` emit .dwo even in the absence of -g.
This should fix https://crbug.com/1158215 after D80391.
```
// Distributed ThinLTO usage
clang -g -O2 -c -flto=thin -fthin-link-bitcode=a.indexing.o a.c
clang -g -O2 -c -flto=thin -fthin-link-bitcode=b.indexing.o b.c
clang -fuse-ld=lld -Wl,--thinlto-index-only=a.rsp -Wl,--thinlto-prefix-replace=';lto/' -Wl,--thinlto-object-suffix-replace='.indexing.o;.o' a.indexing.o b.indexing.o
clang -gsplit-dwarf -O2 -c -fthinlto-index=lto/a.o.thinlto.bc a.o -o lto/a.o
clang -gsplit-dwarf -O2 -c -fthinlto-index=lto/b.o.thinlto.bc b.o -o lto/b.o
clang -fuse-ld=lld @a.rsp -o exe
```
Note: for implicit regular/Thin LTO, .dwo emission works without this patch:
`clang -flto=thin -gsplit-dwarf a.o b.o` passes `-plugin-opt=dwo_dir=` to the linker.
The linker forwards the option to LTO. LTOBackend.cpp emits `$dwo_dir/[01234].dwo`.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D94647
If conflicting `-fprofile-generate -fcs-profile-generate` are used together,
there is currently an assertion failure. Fix the failure.
Also add some driver tests.
Reviewed By: xur
Differential Revision: https://reviews.llvm.org/D94463
This patch removes the -f[no-]trapping-math flags from the -cc1 command line. These flags are ignored in the command line parser and their semantics is fully handled by -ffp-exception-mode.
This patch does not remove -f[no-]trapping-math from the driver command line. The driver flags are being used and do affect compilation.
Reviewed By: dexonsmith, SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D93395
GCC r218397 "x86-64: Optimize access to globals in PIE with copy reloc" made
-fpie code emit R_X86_64_PC32 to reference external data symbols by default.
Clang adopted -mpie-copy-relocations D19996 as a flexible alternative.
The name -mpie-copy-relocations can be improved [1] and does not capture the
idea that this option can apply to -fno-pic and -fpic [2], so this patch
introduces -f[no-]direct-access-external-data and makes -mpie-copy-relocations
their aliases for compatibility.
[1]
For
```
extern int var;
int get() { return var; }
```
if var is defined in another translation unit in the link unit, there is no copy
relocation.
[2]
-fno-pic -fno-direct-access-external-data is useful to avoid copy relocations.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65888
If a shared object is linked with -Bsymbolic or --dynamic-list and exports a
data symbol, normally the data symbol cannot be accessed by -fno-pic code
(because by default an absolute relocation is produced which will lead to a copy
relocation). -fno-direct-access-external-data can prevent copy relocations.
-fpic -fdirect-access-external-data can avoid GOT indirection. This is like the
undefined counterpart of -fno-semantic-interposition. However, the user should
define var in another translation unit and link with -Bsymbolic or
--dynamic-list, otherwise the linker will error in a -shared link. Generally
the user has better tools for their goal but I want to mention that this
combination is valid.
On COFF, the behavior is like always -fdirect-access-external-data.
`__declspec(dllimport)` is needed to enable indirect access.
There is currently no plan to affect non-ELF behaviors or -fpic behaviors.
-fno-pic -fno-direct-access-external-data will be implemented in the subsequent patch.
GCC feature request https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98112
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D92633
@ikudrin enabled support for dwarf64 in D87011. Adding a clang flag so it can be used through that compilation pass.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D90507
Summary:
Optimized debugging is not supported by ptxas. Debugging information is degraded to line information only if optimizations are enabled, but debugging information would be added back in by the driver if remarks were enabled. This solves https://bugs.llvm.org/show_bug.cgi?id=48153.
Reviewers: jdoerfert tra jholewinski serge-sans-paille
Differential Revision: https://reviews.llvm.org/D94123
Saiyedul Islam