This helps recognise patterns where we're trying to match STEP_VECTOR
patterns to INDEX instructions that take a GPR for the Start/Step.
The reason for canonicalising this operation to the LHS is
because it will already be canonicalised to the LHS if the RHS
is a constant splat vector.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D118459
Do "simplifyShift" and "FoldConstantArithmetic" folds for the SSHLSAT
and USHLSAT DAG nodes.
This includes folds such as:
(shlsat undef/poison, x) -> 0
(shlsat x, undef/poison) -> undef
(shlsat x, too_large_shamt) -> undef
(shlsat 0, x) -> 0
(shlsat x, 0) -> x
(shlsat c1, c2) -> c3
Differential Revision: https://reviews.llvm.org/D118603
We already perform some basic folds (add/sub with zero etc.) on scalar types, this patch adds some basic support for constant splats as well in a few cases (we can add more with future test coverage).
In the cases I've enabled, we can handle buildvector implicit truncation as we're not creating new constant nodes from the vector types - we're just returning existing nodes. This allows us to get a number of extra cases in the aarch64 tests.
I haven't enabled support for undefs in buildvector splats, as we're often checking for zero/allones patterns that return the original constant and we shouldn't be returning undef elements in some of these cases - we can enable this later if we're OK with creating new constants.
Differential Revision: https://reviews.llvm.org/D118264
The loop below the changed line assumes that the element
width of the target constant is the same as the element
width of the loaded value, but that is not always true.
We could try harder to do some kind of min/max calc even
if the sizes don't match, but that can be another patch
if needed. This fixes#53401 (miscompile) and does not
change the motivating cases added when this analysis
was introduced:
ad298f86b7
Given that step_vector is practically a constant, doing this early
helps with DAGCombine folds that happen before type legalization.
There is currently no way to test this happens earlier, although existing
tests for step_vector folds continue protect the folds happening at all.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D117863
This can show up during when bitreverse is expanded to bswap and
swap of bits within a byte. If the input is already a bswap, we
should cancel them out before we further transform them in a way
that makes it harder to see the redundancy.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D118007
SelectionDAG::getNode() canonicalises constants to the RHS if the
operation is commutative, but it doesn't do so for constant splat
vectors. Doing this early helps making certain folds on vector types,
simplifying the code required for target DAGCombines that are enabled
before Type legalization.
Somewhat to my surprise, DAGCombine doesn't seem to traverse the
DAG in a post-order DFS, so at the time of doing some custom fold where
the input is a MUL, DAGCombiner::visitMUL hasn't yet reordered the
constant splat to the RHS.
This patch leads to a few improvements, but also a few minor regressions,
which I traced down to D46492. When I tried reverting this change to see
if the changes were still necessary, I ran into some segfaults. Not sure
if there is some latent bug there.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117794
Split vp.reduction.* intrinsics by splitting the vector to reduce in
two halves, perform the reduction operation in each one of them and
accumulate the results of both operations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117469
When we know the value we're extending is a negative constant then it
makes sense to use SIGN_EXTEND because this may improve code quality in
some cases, particularly when doing a constant splat of an unpacked vector
type. For example, for SVE when splatting the value -1 into all elements
of a vector of type <vscale x 2 x i32> the element type will get promoted
from i32 -> i64. In this case we want the splat value to sign-extend from
(i32 -1) -> (i64 -1), whereas currently it zero-extends from
(i32 -1) -> (i64 0xFFFFFFFF). Sign-extending the constant means we can use
a single mov immediate instruction.
New tests added here:
CodeGen/AArch64/sve-vector-splat.ll
I believe we see some code quality improvements in these existing
tests too:
CodeGen/AArch64/reduce-and.ll
CodeGen/AArch64/unfold-masked-merge-vector-variablemask.ll
The apparent regressions in CodeGen/AArch64/fast-isel-cmp-vec.ll only
occur because the test disables codegen prepare and branch folding.
Differential Revision: https://reviews.llvm.org/D114357
Original patch by @hussainjk.
This patch was split off from D109377 to keep vector legalization
(widening/splitting) separate from vector element legalization
(promoting).
While the original patch added a third overload of
SelectionDAG::getVPStore, this patch takes the liberty of collapsing
those all down to 1, as three overloads seems excessive for a
little-used node.
The original patch also used ModifyToType in places, but that method
still crashes on scalable vector types. Seeing as the other VP
legalization methods only work when all operands need identical
widening, this patch follows in that vein.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117235
This commit sometimes causes a crash when compiling a vtable thunk. E.g.:
clang '--target=aarch64-grtev4-linux-gnu' -xc++ - -c -o /dev/null <<EOF
struct a {
virtual int f();
};
struct c {
virtual int &g() const;
};
struct d : a, c {
int &g() const;
};
int &d::g() const {}
EOF
Some follow-up commits have been reverted as well:
Revert "IR: Make getRetAlign check callee function attributes"
Revert "Fix MSVC "32-bit shift implicitly converted to 64 bits" warning. NFC."
Revert "Fix MSVC "32-bit shift implicitly converted to 64 bits" warning. NFC."
This reverts commit 4f414af6a7.
This reverts commit a5507d2e25.
This reverts commit 3d2d208f6a.
This reverts commit 07ddfa95e3.
When we know the value we're extending is a negative constant then it
makes sense to use SIGN_EXTEND because this may improve code quality in
some cases, particularly when doing a constant splat of an unpacked vector
type. For example, for SVE when splatting the value -1 into all elements
of a vector of type <vscale x 2 x i32> the element type will get promoted
from i32 -> i64. In this case we want the splat value to sign-extend from
(i32 -1) -> (i64 -1), whereas currently it zero-extends from
(i32 -1) -> (i64 0xFFFFFFFF). Sign-extending the constant means we can use
a single mov immediate instruction.
New tests added here:
CodeGen/AArch64/sve-vector-splat.ll
I believe we see some code quality improvements in these existing
tests too:
CodeGen/AArch64/dag-numsignbits.ll
CodeGen/AArch64/reduce-and.ll
CodeGen/AArch64/unfold-masked-merge-vector-variablemask.ll
The apparent regressions in CodeGen/AArch64/fast-isel-cmp-vec.ll only
occur because the test disables codegen prepare and branch folding.
Differential Revision: https://reviews.llvm.org/D114357
These nodes should saturate to their saturating VT. We can use this
information to know the bits past the VT are all zeros or all sign bits.
I think we might only have test coverage for the unsigned case. I'll
verify and add tests.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D116870
Split vp.select in a similar way as vselect, splitting also the length
parameter.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D116651
This function returns an upper bound on the number of bits needed
to represent the signed value. Use "Max" to match similar functions
in KnownBits like countMaxActiveBits.
Rename APInt::getMinSignedBits->getSignificantBits. Keeping the old
name around to keep this patch size down. Will do a bulk rename as
follow up.
Rename KnownBits::countMaxSignedBits->countMaxSignificantBits.
Reviewed By: lebedev.ri, RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D116522
Merge the node combines into a common DAGCombiner::visitFMinMax (like we do for IMINMAX).
Move the constant folding into SelectionDAG::foldConstantFPMath.
This allows us to fold the vecreduce-propagate-sd-flags.ll test as it reduces constants - so I've refactored it to take variables instead.
Differential Revision: https://reviews.llvm.org/D115952
Usage and naming of macros in VPIntrinsics.def has been inconsistent. Rename all property macros to VP_PROPERTY_<name>. Use BEGIN/END scope macros to attach properties to vp intrinsics and SDNodes (instead of specifying either directly with the property macro).
A follow-up patch has documentation on how the macros are (intended) to be used.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D114144
Enable FoldConstantArithmetic to constant fold bitcasted constant build vectors. These have typically been bitcasted for type legalization purposes.
By extracting the raw constant bit data, performing the constant fold, and then casting the constant bit data back to the (legalized) type, we can perform constant folding on integer types after legalization.
This in particular helps 32-bit targets which need to handle vXi64 build vectors - during legalization the (unsupported) i64 elements are split to create a bitcasted v2Xi32 build vector.
Addresses some regressions in D113192.
Differential Revision: https://reviews.llvm.org/D113564
NFC refactor of D113351, pulling out the APInt split/merge code from the BuildVectorSDNode bits extraction into a BuildVectorSDNode::recastRawBits helper. This is to allow us to reuse the code when we're packing constant folded APInt data back together.
This patch merges FoldConstantVectorArithmetic back into FoldConstantArithmetic.
Like FoldConstantVectorArithmetic we now handle vector ops with any operand count, but we currently still only handle binops for scalar types - this can be improved in future patches - in particular some common unary/trinary ops still have poor constant folding.
There's one change in functionality causing test changes - FoldConstantVectorArithmetic bails early if the build/splat vector isn't all constant (with some undefs) elements, but FoldConstantArithmetic doesn't - it instead attempts to fold the scalar nodes and bails if they fail to regenerate a constant/undef result, allowing some additional identity/undef patterns to be handled.
Differential Revision: https://reviews.llvm.org/D113300
As suggested on D113371, this adds a wrapper to SelectionDAG::ComputeNumSignBits, similar to the llvm::ComputeMinSignedBits wrapper.
I've included some usage, its not exhaustive, just the more obvious cases where the intention is obvious.
Differential Revision: https://reviews.llvm.org/D113396
We have several places where we need to extract the raw bits data from a BUILD_VECTOR node, so consolidate this to a single helper function that handles Undefs and Integer/FP constants, including implicit truncation.
This should make it easier to extend D113202 to handle more constant folding of bitcasted constant data.
Differential Revision: https://reviews.llvm.org/D113351
Another minor step towards merging FoldConstantVectorArithmetic into FoldConstantArithmetic.
We don't use SDNodeFlags in any constant folding inside DAG, so passing the Flags argument is a waste of time - an alternative would be to wire up FoldConstantArithmetic to take SDNodeFlags just-in-case we someday start using it, but we don't have any way to test it and I'd prefer to avoid dead code.
Differential Revision: https://reviews.llvm.org/D113276
NumOps represents the number of elements for vector constant folding, rename this NumElts so in future we can the consistently use NumOps to represent the number of operands of the opcode.
Minor cleanup before trying to begin generalizing FoldConstantArithmetic to support opcodes other than binops.
To constant fold bitwise logic ops where we've legalized constant build vectors to a different type (e.g. v2i64 -> v4i32), this patch adds a basic ability to peek through the bitcasts and perform the constant fold on the inner operands.
The MVE predicate v2i64 regressions will be addressed by future support for basic v2i64 type support.
One of the yak shaving fixes for D113192....
Differential Revision: https://reviews.llvm.org/D113202
As noted in https://reviews.llvm.org/D90924#inline-1076197
apparently this is a pretty common pattern,
let's not repeat it yet again, but have it in a common place.
There may be some more places where it could be used,
but these are the most obvious ones.
When splitting a masked load, `GetDependentSplitDestVTs` is used to get the
MemVTs of the high and low parts. If the masked load is extended, this
may return VTs with different element types which are used to create the
high & low masked load instructions.
This patch changes `GetDependentSplitDestVTs` to ensure we return VTs with
the same element type.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D111996
Roman Lebedev