This is similar to what is done for targets that prefer zero extend
where we avoid using a zero extend if the promoted values are sign
extended.
We'll also check for zero extended operands for ugt, ult, uge, and ule when the
target prefers sign extend. This is different than preferring zero extend, where
we only check for sign bits on equality comparisons.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D116421
The 'New' only makes sense in the context of these being
output arguments, but they are also used as inputs first.
Drop the 'New' and just call them LHS/RHS.
Factored out of D116421.
This patch adds isel support for STRICT_LRINT/LLRINT/LROUND/LLROUND.
It also adds test cases for f32 and f64 constrained intrinsics that
correspond to the intrinsics in float-intrinsics.ll and
double-intrinsics.ll. Support for promoting the integer argument of
STRICT_FPOWI was added.
I've skipped adding tests for f16 intrinsics, since we don't have libcalls
for them and we have inconsistent support for promoting them in LegalizeDAG.
This will need to be examined more closely.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D116323
getShiftAmountTy used to directly return the shift amount type from
the target which could be too small for large illegal types. For
example, X86 always returns i8.
The code here detected this and used i32 instead if it won't fit. This
behavior was added to getShiftAmountTy in D112469 so we no longer need
this workaround.
Fix issue in TargetLowering::expandROT where we only attempt to flip a rotation if the other direction has better support - this matches TargetLowering::expandFunnelShift
This allows us to enable ISD::ROTR lowering on SSE targets, which particularly simplifies/improves codegen for splat amount and AVX2 per-element shifts.
When the source has a series of assignments, users reasonably want to
have the debugger step through each one individually. Turn off the combine
for adjacent stores so we get this behavior at -O0.
Similar to D7181.
Reviewed By: spatel, xgupta
Differential Revision: https://reviews.llvm.org/D115808
With Control-Flow Integrity (CFI), the LowerTypeTests pass replaces
function references with CFI jump table references, which is a problem
for low-level code that needs the address of the actual function body.
For example, in the Linux kernel, the code that sets up interrupt
handlers needs to take the address of the interrupt handler function
instead of the CFI jump table, as the jump table may not even be mapped
into memory when an interrupt is triggered.
This change adds the no_cfi constant type, which wraps function
references in a value that LowerTypeTestsModule::replaceCfiUses does not
replace.
Link: https://github.com/ClangBuiltLinux/linux/issues/1353
Reviewed By: nickdesaulniers, pcc
Differential Revision: https://reviews.llvm.org/D108478
When the source has a series of assignments, users reasonably want to
have the debugger step through each one individually. Turn off the combine
for adjacent stores so we get this behavior at -O0.
Similar to D7181.
Differential Revision: https://reviews.llvm.org/D115808
Merge the node combines into a common DAGCombiner::visitFMinMax (like we do for IMINMAX).
Move the constant folding into SelectionDAG::foldConstantFPMath.
This allows us to fold the vecreduce-propagate-sd-flags.ll test as it reduces constants - so I've refactored it to take variables instead.
Differential Revision: https://reviews.llvm.org/D115952
We were using a function attribute to indicate a non-standard FP mode,
but now we can use intrinsics for that job as shown in the new tests.
Presumably the x86 asm could be improved for that IR with intrinsics,
but I have not worked out exactly how to do that. Note that the
transform to FTRUNC still requires a hacky check for "nsz" (because
FMF are not applied to FP casts).
This is a cleanup based on the clang change in D115804 / 8c7f2a4f87 .
This is effectively a revert of 5a90285bd9 + D46237 .
Differential Revision: https://reviews.llvm.org/D115885
Replace custom constant scalar/splat folding with FoldConstantArithmetic call and canonicalize commutative constant ops to the RHS before the SimplifyVBinOp call
This extends the custom lowering for truncating stores on
fixed length vectors in SVE to support masked truncating stores.
It also adds a DAG combine for truncates followed by masked
stores.
Reviewed By: peterwaller-arm, paulwalker-arm
Differential Revision: https://reviews.llvm.org/D108115
SimplifyVBinOp still has a FoldConstantArithmetic call, which now it isn't vector specific we should be able to remove (once fp binops are tidied up); but we can at least clean up the integer opcodes to perform the basic constant/undef handling in common code first.
These were detected by the new -Wauto-by-value-copy (D114989) warning, these by-value
constant copies need only be references.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D114990
-(Za + Zm * Zn) != (-Za + Zm * (-Zn))
when the FMA produces a zero output (e.g. all zero inputs can produce -0
output)
Add a PatFrag to check presence of nsz on the fneg, add tests which
ensure the combine does not fire in the absense of nsz.
See https://reviews.llvm.org/D90901 for a similar discussion on X86.
Differential Revision: https://reviews.llvm.org/D109525
This patch fixes an issue during SelectionDAG construction. When the
target is unable to lower the function's return value, a hidden sret
parameter is created. It is initialized and copied to a stored variable
(DemoteRegister) with CopyToReg and is later fetched with
CopyFromReg. The bug is that the chains used for each copy are
inconsistent, and thus in rare cases the scheduler may issue them out of
order.
The fix is to ensure that the CopyFromReg uses the DAG root which is set
as the chain corresponding to the initial CopyToReg.
Fixes https://llvm.org/PR52475
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D114795
Previously we were using UADDO to generate a two-result value with
the unsigned addition and the overflow mask. We then combined the
overflow mask with the trip count comparison to get a result.
However, we don't need to do this - we can simply use a UADDSAT
saturating add node to add the vector index splat and the stepvector
together. Then we can just compare this to a splat of the trip count.
This results in overall better code quality for both Thumb2 and AArch64.
Differential Revision: https://reviews.llvm.org/D115354
There is a pointer to the DataLayout in SelectionDAGBuilder called
'DL' that is hardly ever used. In most cases the code seems to just
use `DAG.getDataLayout()` instead. Given that DL is also often used
as a shadowed variable for the debug location it seems sensible to
just kill off the few remaining uses and be consistent with the rest
of the code.
Differential Revision: https://reviews.llvm.org/D114451
After D113888 / 32b6c17b29 the MMO size of a masked loads/store is
unknown. When we are converting back to a standard load/store because
the mask is known all ones, we can refine that to the correct size from
the size of the vector being loaded/stored.
Differential Revision: https://reviews.llvm.org/D114582
In the style of D113888, this patch updates the various VP memory
operations (load, store, gather, scatter) to use UnknownSize. This is
for the same reason as for masked loads and stores: the number of
elements accessed is not generally known at compile time.
This is somewhat pessimistic in the sense that we may still find
un-canonicalized intrinsics featuring both an all-true mask and an EVL
equal to the vector size. Arguably those should be canonicalized before
the SelectionDAG, so those have been left for future work.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D115036
This patch fixes a case where the 'align' parameter attribute on the
pointer operands to llvm.vp.load and llvm.vp.store was being dropped
during the conversion to the SelectionDAG. The default alignment
equal to the ABI type alignment of the vector type was kept. It also
updates the documentation to reflect the fact that the parameter
attribute is now properly supported.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D114422
As an extension to D111976, this converts clamp fptosi, clamped between
0 and (2^n)-1 to a fptoui.sat. This can greatly help on targets with
conversions that naturally saturate, such as Arm.
X86 disables the transform as some of the test cases increases in size.
A fptoui.sat necessitates a fp clamp without native support, so there is
little use in converting if the instruction is just going to be
expanded.
Differential Revision: https://reviews.llvm.org/D112428
MVE can treat v16i1, v8i1, v4i1 and v2i1 as different views onto the
same 16bit VPR.P0 register, with v2i1 holding two 8 bit values for the
two halves. This was never treated as a legal type in llvm in the past
as there are not many 64bit instructions and no 64bit compares. There
are a few instructions that could use it though, notably a VSELECT (as
it can handle any size using the underlying v16i8 VPSEL), AND/OR/XOR for
similar reasons, some gathers/scatter and long multiplies and VCTP64
instructions.
This patch goes through and makes v2i1 a legal type, handling all the
cases that fall out of that. It also makes VSELECT legal for v2i64 as a
side benefit. A lot of the codegen changes as a result - usually in way
that is a little better or a little worse, but still expensive. Costs
can change a little too in the process, again in a way that expensive
things remain expensive. A lot of the tests that changed are mainly to
ensure correctness - the code can hopefully be improved in the future
where it comes up in practice.
The intrinsics currently remain using the v4i1 they previously did to
emulate a v2i1. This will be changed in a followup patch but this one
was already large enough.
Differential Revision: https://reviews.llvm.org/D114449
This patch begins extending handling for peeking through bitcast nodes to big-endian targets as well as the existing little-endian case.
Differential Revision: https://reviews.llvm.org/D114676
combinePMULH currently only truncates vXi32/vXi64 multiplies to PMULHW/PMULUW if the source operands are SEXT/ZEXT instructions for a 'free' truncation.
But we can generalize this to any source operand with sufficient leading sign/zero bits that would allow PACKS/PACKUS to be used as a 'cheap' truncation.
This helps us avoid the wider multiplies, in exchange for truncation on both source operands instead of the result.
Differential Revision: https://reviews.llvm.org/D113371
The REM DAG combine uses the visitDivLike functions to try and get an
optimized DIV node to provide better codegen, however in some cases this
visitDivLike call ends up in the BuildSDIVPow2 target hook, which in
turn sometimes will return the same node passed in to indicate not to
change it. The REM DAG combine does not anticipate this and creates a
cycle in the DAG because of it.
Fix this by ensuring any such optimized div node returned is distinct
from the node being combined.
Differential Revision: https://reviews.llvm.org/D114716
This adds a fold in DAGCombine to create fptosi_sat from sequences for
smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
to be handled similarly.
A shouldConvertFpToSat method was added to control when converting may
be profitable. The original fptosi will have a less strict semantics
than the fptosisat, with less values that need to produce defined
behaviour.
This especially helps on ARM/AArch64 where the vcvt instructions
naturally saturate the result.
Differential Revision: https://reviews.llvm.org/D111976
It causes builds to fail with this assert:
llvm/include/llvm/ADT/APInt.h:990:
bool llvm::APInt::operator==(const llvm::APInt &) const:
Assertion `BitWidth == RHS.BitWidth && "Comparison requires equal bit widths"' failed.
See comment on the code review.
> This adds a fold in DAGCombine to create fptosi_sat from sequences for
> smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
> the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
> it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
> ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
> to be handled similarly.
>
> A shouldConvertFpToSat method was added to control when converting may
> be profitable. The original fptosi will have a less strict semantics
> than the fptosisat, with less values that need to produce defined
> behaviour.
>
> This especially helps on ARM/AArch64 where the vcvt instructions
> naturally saturate the result.
>
> Differential Revision: https://reviews.llvm.org/D111976
This reverts commit 52ff3b0093.
This adds a fold in DAGCombine to create fptosi_sat from sequences for
smin(smax(fptosi(x))) nodes, where the min/max saturate the output of
the fp convert to a specific bitwidth (say INT_MIN and INT_MAX). Because
it is dealing with smin(/smax) in DAG they may currently be ISD::SMIN,
ISD::SETCC/ISD::SELECT, ISD::VSELECT or ISD::SELECT_CC nodes which need
to be handled similarly.
A shouldConvertFpToSat method was added to control when converting may
be profitable. The original fptosi will have a less strict semantics
than the fptosisat, with less values that need to produce defined
behaviour.
This especially helps on ARM/AArch64 where the vcvt instructions
naturally saturate the result.
Differential Revision: https://reviews.llvm.org/D111976
Usually dbg.declares get translated into either entries in an MF
side-table, or a DBG_VALUE on entry to the function with IsIndirect set
(including in instruction referencing mode). Much rarer is a dbg.declare
attached to a non-argument value, such as in the test added in this patch
where there's a variable-length-array. Such dbg.declares become SDDbgValue
nodes with InIndirect=true.
As it happens, we weren't correctly emitting DBG_INSTR_REFs with the
additional indirection. This patch adds the extra indirection, encoded as
adding an additional DW_OP_deref to the expression.
Differential Revision: https://reviews.llvm.org/D114440
This allows the generic DAG combine to fold fp_extend/fp_trunc into
loads/stores which we can then lower into a integer extending
load/truncating store plus an FP_EXTEND/FP_ROUND.
The nuance here is that fixed-type FP_EXTEND/FP_ROUND require unpacked
types hence lowering them introduces an unpack/zip. By allowing these
nodes to be combined with loads/store we make it much easier to have
this unpack/zip combined into the load/store by our custom lowering.
Differential Revision: https://reviews.llvm.org/D114580
In most common cases the @llvm.get.active.lane.mask intrinsic maps directly
to the SVE whilelo instruction, which already takes overflow into account.
However, currently in SelectionDAGBuilder::visitIntrinsicCall we always lower
this immediately to a generic sequence of instructions that explicitly
take overflow into account. This makes it very difficult to then later
transform back into a single whilelo instruction. Therefore, this patch
introduces a new TLI function called shouldExpandGetActiveLaneMask that asks if
we should lower/expand this to a sequence of generic ISD nodes, or instead
just leave it as an intrinsic for the target to lower.
You can see the significant improvement in code quality for some of the
tests in this file:
CodeGen/AArch64/active_lane_mask.ll
Differential Revision: https://reviews.llvm.org/D114542
Currently the generic lowering of llvm.get.active.lane.mask is done
in SelectionDAGBuilder::visitIntrinsicCall and currently assumes
only fixed-width vectors are used. This patch changes the code to be
more generic and support scalable vectors too. I have added tests
for SVE here:
CodeGen/AArch64/active_lane_mask.ll
although the code quality leaves a lot to be desired. The code will
be improved significantly in a later patch that makes use of the
SVE whilelo instruction.
Differential Revision: https://reviews.llvm.org/D114541
If we only demand bits from one half of a rotation pattern, see if we can simplify to a logical shift.
For the ARM/AArch64 rev16/32 patterns, I had to drop a fold to prevent srl(bswap()) -> rotr(bswap) -> srl(bswap) infinite loops. I've replaced this with an isel PatFrag which should do the same task.
Reapplied with fix for AArch64 rev patterns to matching the ARM fix.
https://alive2.llvm.org/ce/z/iroxki (rol -> shl by amt iff demanded bits has at least as many trailing zeros as the shift amount)
https://alive2.llvm.org/ce/z/4ez_U- (ror -> shl by revamt iff demanded bits has at least as many trailing zeros as the reverse shift amount)
https://alive2.llvm.org/ce/z/cD7dR- (ror -> lshr by amt iff demanded bits has at least as many leading zeros as the shift amount)
https://alive2.llvm.org/ce/z/_XGHtQ (rol -> lshr by revamt iff demanded bits has at least as many leading zeros as the reverse shift amount)
Differential Revision: https://reviews.llvm.org/D114354
If we only demand bits from one half of a rotation pattern, see if we can simplify to a logical shift.
For the ARM rev16 patterns, I had to drop a fold to prevent srl(bswap()) -> rotr(bswap) -> srl(bswap) infinite loops. I've replaced this with an isel PatFrag which should do the same task.
https://alive2.llvm.org/ce/z/iroxki (rol -> shl by amt iff demanded bits has at least as many trailing zeros as the shift amount)
https://alive2.llvm.org/ce/z/4ez_U- (ror -> shl by revamt iff demanded bits has at least as many trailing zeros as the reverse shift amount)
https://alive2.llvm.org/ce/z/cD7dR- (ror -> lshr by amt iff demanded bits has at least as many leading zeros as the shift amount)
https://alive2.llvm.org/ce/z/_XGHtQ (rol -> lshr by revamt iff demanded bits has at least as many leading zeros as the reverse shift amount)
Differential Revision: https://reviews.llvm.org/D114354
In quite a few places we were calling getCurSDLoc() to get the debug
location, but this is already a local variable `sdl`.
Differential Revision: https://reviews.llvm.org/D114447
Usage and naming of macros in VPIntrinsics.def has been inconsistent. Rename all property macros to VP_PROPERTY_<name>. Use BEGIN/END scope macros to attach properties to vp intrinsics and SDNodes (instead of specifying either directly with the property macro).
A follow-up patch has documentation on how the macros are (intended) to be used.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D114144
A masked load or store will load a potentially unknown number of bytes
from a memory location - that is not generally known at compile time.
They do not necessarily load/store the entire vector width, and treating
them as such can lead to incorrect aliasing information (for example, if
the underlying object is smaller than the size of the vector).
This makes sure that the MMO is given an unknown size to represent this.
which is less accurate that "may load/store from up to 16 bytes", but
less incorrect that "will load/store from 16 bytes".
Differential Revision: https://reviews.llvm.org/D113888
Patch to fix some of the regressions in D77804.
By folding to rotate/funnel-shift by constant amounts for illegal types, we prevent SimplifyDemandedBits from destroying the patterns prematurely, allowing us to use the rotate/funnel-shift legalization that was added in D112443.
Differential Revision: https://reviews.llvm.org/D113192
Fixed the vector type issue that where we used getVectorNumElements()
should be replaced by getVectorElementCount() when lowering these
intrinsics.
This is similar to D94149
Signed-off-by: Eric Tang <tangxingxin1008@gmail.com>
Reviewed By: craig.topper, frasercrmck
Differential Revision: https://reviews.llvm.org/D109809
Don't expand CTTZ if CTPOP or CTLZ is supported on the promoted type.
We have special handling for CTTZ expansion to use those ops with a
small conversion. The setup for that doesn't generate extra code or
large constants so we don't gain anything from expanding early and we
make CTTZ_ZERO_UNDEF codegen worse.
Follow up from post commit feedback on D112268. We don't seem to have
any in tree tests that care about this.
If we have a large enough floating point type that can exactly
represent the integer value, we can convert the value to FP and
use the exponent to calculate the leading/trailing zeros.
The exponent will contain log2 of the value plus the exponent bias.
We can then remove the bias and convert from log2 to leading/trailing
zeros.
This doesn't work for zero since the exponent of zero is zero so we
can only do this for CTLZ_ZERO_UNDEF/CTTZ_ZERO_UNDEF. If we need
a value for zero we can use a vmseq and a vmerge to handle it.
We need to be careful to make sure the floating point type is legal.
If it isn't we'll continue using the integer expansion. We could split the vector
and concatenate the results but that needs some additional work and evaluation.
Differential Revision: https://reviews.llvm.org/D111904
If we've only demanded the 0'th element, and it comes from a (one-use) AND, try to convert the zero_extend_vector_inreg into a mask and constant fold it with the AND.
This change make WidenVecRes_SELECT work for scalable vectors.
This patch is split from [D110319](https://reviews.llvm.org/D110319)
Signed-off-by: Eric Tang <tangxingxin1008@gmail.com>
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D110388
Fixes PR#48678. `X86TargetLowering::getRegForInlineAsmConstraint()` can adjust the register class to match the type, e.g. change `VR128X` to `VR256X` if the type needs 256 bits. However, the function currently returns the unadjusted register and the adjusted register class, e.g. `xmm15` and `VR256X`, which then causes an assertion failure later because the register class does not contain that register. This patch fixes this behavior.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D113834
It's possible that the mask is already a NOT. At least if InstCombine
hasn't canonicalized the input. In that case we will form an ANDN with
X instead of with Y. So we don't need to worry about Y being a constant.
We might need to check that X isn't a constant instead, but we don't
have a test case for that yet.
This fixes a size regression found when trying to enable this combine
for RISCV in D113937.
Differential Revision: https://reviews.llvm.org/D113948
This was noted as a follow-up to D113212 / D113426:
4fc1fc40057e30404c3b11522cfcadhttps://alive2.llvm.org/ce/z/e4o96b
The canonicalization rules for these IR patterns are complicated,
and we were not matching the expected forms in 2 out of the 3
cases. We can make codegen more robust by matching the swapped
forms (and that will also work if these patterns are created late).
(Cond0 s> -1) ? N1 : 0 --> ~(Cond0 s>> BW-1) & N1
https://alive2.llvm.org/ce/z/mGCBrd
This was suggested as a potential enhancement in D113212 (also 7e30404c3b ).
There's an improvement for AArch that could be generalized ( X > -1 --> X >= 0 ).
For x86, we have a counter-acting fold for most cases that turns the shift+not
back into a setcc, so that needs a work-around to get more cases to use "pandn":
D113603
Note that this pattern (and a previous one) are not currently canonical forms
in IR:
https://alive2.llvm.org/ce/z/e4o96b
Adding swapped variants is left as a TODO item here, but is planned as
a near-term follow-up patch.
Differential Revision: https://reviews.llvm.org/D113426
Enable FoldConstantArithmetic to constant fold bitcasted constant build vectors. These have typically been bitcasted for type legalization purposes.
By extracting the raw constant bit data, performing the constant fold, and then casting the constant bit data back to the (legalized) type, we can perform constant folding on integer types after legalization.
This in particular helps 32-bit targets which need to handle vXi64 build vectors - during legalization the (unsupported) i64 elements are split to create a bitcasted v2Xi32 build vector.
Addresses some regressions in D113192.
Differential Revision: https://reviews.llvm.org/D113564
The introduction of this legalization, D111248, forgot to replace the
old chain with the new. This could manifest itself in the old
(illegally-typed) value remaining in the DAG, though the simple test
cases didn't catch this.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D113561
NFC refactor of D113351, pulling out the APInt split/merge code from the BuildVectorSDNode bits extraction into a BuildVectorSDNode::recastRawBits helper. This is to allow us to reuse the code when we're packing constant folded APInt data back together.
This patch fixes a compiler crash when widening scalable-vector loads
and stores which end up breaking down to element-wise store operations.
It does so by providing a way for targets with support for
vector-predicated loads and stores to use those instead. By widening the
operation but maintaining the original effective operation length via
the EVL, only the intended vector elements are loaded or stored.
This method should in theory be possible and even preferred for
fixed-length vector types, but all fixed-length types can be broken down
into their elements, and regardless I have observed regressions in the
generated code when doing so. I believe this is simply due to
VP_LOAD/VP_STORE not being up to par with LOAD/STORE in terms of
optimization. It does improve performance on smaller self-contained
examples, however, so the potential is there.
While the only target that benefits from this is RISCV, the legalization
is generic and so was placed centrally.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D111248
This patch merges FoldConstantVectorArithmetic back into FoldConstantArithmetic.
Like FoldConstantVectorArithmetic we now handle vector ops with any operand count, but we currently still only handle binops for scalar types - this can be improved in future patches - in particular some common unary/trinary ops still have poor constant folding.
There's one change in functionality causing test changes - FoldConstantVectorArithmetic bails early if the build/splat vector isn't all constant (with some undefs) elements, but FoldConstantArithmetic doesn't - it instead attempts to fold the scalar nodes and bails if they fail to regenerate a constant/undef result, allowing some additional identity/undef patterns to be handled.
Differential Revision: https://reviews.llvm.org/D113300
As suggested on D113371, this adds a wrapper to SelectionDAG::ComputeNumSignBits, similar to the llvm::ComputeMinSignedBits wrapper.
I've included some usage, its not exhaustive, just the more obvious cases where the intention is obvious.
Differential Revision: https://reviews.llvm.org/D113396
We have several places where we need to extract the raw bits data from a BUILD_VECTOR node, so consolidate this to a single helper function that handles Undefs and Integer/FP constants, including implicit truncation.
This should make it easier to extend D113202 to handle more constant folding of bitcasted constant data.
Differential Revision: https://reviews.llvm.org/D113351
Currently FoldConstantArithmetic only handles binops, so replacing other uses of FoldConstantVectorArithmetic (in particular for SETCC nodes), still require more work.
This is the 'or' sibling for the fold added with:
D113212
https://alive2.llvm.org/ce/z/tgnp7K
Note that neither of these transforms is poison-safe,
but it does not seem to matter at this level. We have
had the scalar version of D113212 for a long time, so
this is just making optimizer behavior consistent.
We do not have the scalar version of *this* fold,
however, so that is another follow-up.
Another minor step towards merging FoldConstantVectorArithmetic into FoldConstantArithmetic.
We don't use SDNodeFlags in any constant folding inside DAG, so passing the Flags argument is a waste of time - an alternative would be to wire up FoldConstantArithmetic to take SDNodeFlags just-in-case we someday start using it, but we don't have any way to test it and I'd prefer to avoid dead code.
Differential Revision: https://reviews.llvm.org/D113276
(X s< 0) ? Y : 0 --> (X s>> BW-1) & Y
We canonicalize to the icmp+select form in IR, and we already have this fold
for scalar select in SDAG, so I think it's an oversight that we don't have
the fold for vectors. It seems neutral for AArch64 and saves some instructions
on x86.
Whether we should also have the sibling folds for the inverse condition or
all-ones true value may depend on target-specific factors such as whether
there's an "and-not" instruction.
Differential Revision: https://reviews.llvm.org/D113212
NumOps represents the number of elements for vector constant folding, rename this NumElts so in future we can the consistently use NumOps to represent the number of operands of the opcode.
Minor cleanup before trying to begin generalizing FoldConstantArithmetic to support opcodes other than binops.
To constant fold bitwise logic ops where we've legalized constant build vectors to a different type (e.g. v2i64 -> v4i32), this patch adds a basic ability to peek through the bitcasts and perform the constant fold on the inner operands.
The MVE predicate v2i64 regressions will be addressed by future support for basic v2i64 type support.
One of the yak shaving fixes for D113192....
Differential Revision: https://reviews.llvm.org/D113202
Fold (srl (mul (zext i32:$a to i64), i64:c), 32) -> (mulhu $a, $b),
if c can truncate to i32 without loss.
Reviewed By: frasercrmck, craig.topper, RKSimon
Differential Revision: https://reviews.llvm.org/D108129
If the type of a funnel shift needs to be expanded, expand it to two funnel shifts instead of regular shifts. For constant shifts, this doesn't make much difference, but for variable shifts it allows a more optimal lowering.
Also use the optimized funnel shift lowering for rotates.
Alive2: https://alive2.llvm.org/ce/z/TvHDB- / https://alive2.llvm.org/ce/z/yzPept
(Branched from D108058 as getting this completed should help unlock some other WIP patches).
Original Patch: @efriedma (Eli Friedman)
Differential Revision: https://reviews.llvm.org/D112443
Rely on the hasOperation() instead - as commented on D77804, the mid-term intention is to recognise rotate/funnel-by-constant pre-legalization to help avoid SimplifyDemandedBits regressions.
As noted in https://reviews.llvm.org/D90924#inline-1076197
apparently this is a pretty common pattern,
let's not repeat it yet again, but have it in a common place.
There may be some more places where it could be used,
but these are the most obvious ones.
This patch removes an internal failure found in FindMemType and "bubbles
it up" to the users of that method: GenWidenVectorLoads and
GenWidenVectorStores. FindMemType -- renamed findMemType -- now returns
an optional value, returning None if no such type is found.
Each of the aforementioned users now pre-calculates the list of types it
will use to widen the memory access. If the type breakdown is not
possible they will signal a failure, at which point the compiler will
crash as it does currently.
This patch is preparing the ground for alternative legalization
strategies for vector loads and stores, such as using vector-predication
versions of loads or stores.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112000
PromoteIntRes_MLOAD always sets the extension type to `EXTLOAD`, which
results in a sign-extended load. If the type returned by getExtensionType()
for the load being promoted is something other than `NON_EXTLOAD`, we
should instead pass this to getMaskedLoad() as the extension type.
Reviewed By: CarolineConcatto
Differential Revision: https://reviews.llvm.org/D112320
Widens the result and first input vector because they have the same size.
The subvector to be inserted is widened in the operand widen function.
Differential Revision: https://reviews.llvm.org/D112187
getShiftAmountTyForConstant is a special helper that changes the
shift amount to i32 if the type chosen by
TargetLowering::getShiftAmountTy can't represent all possible values.
This is needed to satisfy an assert in SelectionDAG::getNode.
It requires additional consideration to know when this helper should be used.
I'm not sure that we are always using it when we should.
This patch merges the getShiftAmountTyForConstant handling into
TargetLowering::getShiftAmountTy so we don't need to think about it
anymore.
Technically this may slightly increase compile times since the majority
of callers of getShiftAmountTy won't need this. Hopefully, this isn't
an issue in practice.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112469
(i8 X ^ 128) & (i8 X s>> 7) --> usubsat X, 128
As suggested in D112085, we can substitute 'xor' with 'add'
in this pattern, and it is logically equivalent:
https://alive2.llvm.org/ce/z/eJtWWC
We canonicalize to 'xor' in IR, but SDAG does not do that
(and it probably should not - https://llvm.org/PR52267 ), so
it is possible to see either pattern in codegen. Note that
'sub' is a another potential pattern, but that is
canonicalized to 'add' in DAGCombiner, so we don't need to
worry about that variation.
Differential Revision: https://reviews.llvm.org/D112377
We might be promoting a large non-power of 2 type and the new type
may need to be split. Once we split it we may have a ctlz/cttz/ctpop
instruction for the split type.
I'm also concerned that we may create large shifts with shift amounts
that are too small.
EXTRACT_SUBVECTOR indices are always constant, we don't need to check for ConstantSDNode, we should just use getConstantOperandVal which will assert for the constant.
Instead of returning a bool to indicate success and a separate
SDValue, return the SDValue and have the callers check if it is
null.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112331
Expanding these requires multiple constants. If we promote during type
legalization when they'll end up getting expanded in LegalizeDAG, we'll
use larger constants. These constants may be harder to materialize.
For example, 64-bit constants on 64-bit RISCV are very expensive.
This is similar to what has already been done to BSWAP and BITREVERSE.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112268
There is no need to return a bool and have an SDValue output
parameter. Just return the SDValue and let the caller check if it
is null.
I have another patch to add more callers of these so I thought
I'd clean up the interface first.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112267
By expanding early it allows the shifts to be custom lowered in
LegalizeVectorOps. Then a DAG combine is able to run on them before
LegalizeDAG handles the BUILD_VECTORS for the masks used.
v16Xi8 shift lowering on X86 requires a mask to be applied to a v8i16
shift. The BITREVERSE expansion applied an AND mask before SHL ops and
after SRL ops. This was done to share the same mask constant for both shifts.
It looks like this patch allows DAG combine to remove the AND mask added
after v16i8 SHL by X86 lowering. This maintains the mask sharing that
BITREVERSE was trying to achieve. Prior to this patch it looks like
we kept the mask after the SHL instead which required an extra constant
pool or a PANDN to invert it.
This is dependent on D112248 because RISCV will end up scalarizing the BSWAP
portion of the BITREVERSE expansion if we don't disable BSWAP scalarization in
LegalizeVectorOps first.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112254
It's better to do the ands, shifts, ors in the vector domain than
to scalarize it and do those operations on each element.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112248
(i8 X ^ 128) & (i8 X s>> 7) --> usubsat X, 128
I haven't found a generalization of this identity:
https://alive2.llvm.org/ce/z/_sriEQ
Note: I was actually looking at the first form of the pattern in that link,
but that's part of a long chain of potential missed transforms in codegen
and IR....that I hope ends here!
The predicates for when this is profitable are a bit tricky. This version of
the patch excludes multi-use but includes custom lowering (as opposed to
legal only).
On x86 for example, we have custom lowering for some vector types, and that
uses umax and sub. So to enable that fold, we need add use checks to avoid
regressions. Even with legal-only lowering, we could see code with extra
reg move instructions for extra uses, so that constraint would have to be
eased very carefully to avoid penalties.
Differential Revision: https://reviews.llvm.org/D112085
When splitting a masked load, `GetDependentSplitDestVTs` is used to get the
MemVTs of the high and low parts. If the masked load is extended, this
may return VTs with different element types which are used to create the
high & low masked load instructions.
This patch changes `GetDependentSplitDestVTs` to ensure we return VTs with
the same element type.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D111996
With unoptimized code, we may see lots of stores and spend too much time in mergeTruncStores.
Fixes PR51827.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D111596
Our fallback expansion for CTLZ/CTTZ relies on CTPOP. If CTPOP
isn't legal or custom for a vector type we would scalarize the
CTLZ/CTTZ. This is different than CTPOP itself which would use a
vector expansion.
This patch teaches expandCTLZ/CTTZ to rely on the vector CTPOP
expansion instead of scalarizing. To do this I had to add additional
checks to make sure the operations used by CTPOP expansions are all
supported. Some of the operations were already needed for the CTLZ/CTTZ
expansion.
This is a huge improvement to the RISCV which doesn't have a scalar
ctlz or cttz in the base ISA.
For WebAssembly, I've added Custom lowering to keep the scalarizing
behavior. I've also extended the scalarizing to CTPOP.
Differential Revision: https://reviews.llvm.org/D111919
When inserting a scalable subvector into a scalable vector through
the stack, the index to store to needs to be scaled by vscale.
Before this patch, that didn't yet happen, so it would generate the
wrong offset, thus storing a subvector to the incorrect address
and overwriting the wrong lanes.
For some insert:
nxv8f16 insert_subvector(nxv8f16 %vec, nxv2f16 %subvec, i64 2)
The offset was not scaled by vscale:
orr x8, x8, #0x4
st1h { z0.h }, p0, [sp]
st1h { z1.d }, p1, [x8]
ld1h { z0.h }, p0/z, [sp]
And is changed to:
mov x8, sp
st1h { z0.h }, p0, [sp]
st1h { z1.d }, p1, [x8, #1, mul vl]
ld1h { z0.h }, p0/z, [sp]
Differential Revision: https://reviews.llvm.org/D111633
Inspired by D111968, provide a isNegatedPowerOf2() wrapper instead of obfuscating code with (-Value).isPowerOf2() patterns, which I'm sure are likely avenues for typos.....
Differential Revision: https://reviews.llvm.org/D111998
This is NFC-intended for the callers. Posting in case there are
other potential users that I missed.
I would also use this from VectorCombine in a patch for:
https://llvm.org/PR52178 ( D111901 )
Differential Revision: https://reviews.llvm.org/D111891
The process of widening simple vector loads attempts to use a load of a
wider vector type if the original load is sufficiently aligned to avoid
memory faults.
However this optimization is only legal when performed on fixed-length
vector types. For scalable vector types this is invalid (unless vscale
happens to be 1).
This patch does increase the likelihood of compiler crashes (from
`FindMemType` failing to find a suitable type) but this now better
matches how widening non-simple loads, insufficiently-aligned loads, and
scalable-vector stores are handled.
Patches will be introduced later by which loads and stores can be
widened on targets with support for masked or predicated operations.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D111885
This patch adds patterns to match the following with INC/DEC:
- @llvm.aarch64.sve.cnt[b|h|w|d] intrinsics + ADD/SUB
- vscale + ADD/SUB
For some implementations of SVE, INC/DEC VL is not as cheap as ADD/SUB and
so this behaviour is guarded by the "use-scalar-inc-vl" feature flag, which for SVE
is off by default. There are no known issues with SVE2, so this feature is
enabled by default when targeting SVE2.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D111441
This reverts commit 3e8d2008f7.
The code removed in this commit is actually required for extracting
fixed types from illegal scalable types, hence this commit causes
assertion failures in such extracts.
The shift libcalls have a shift amount parameter of MVT::i32, but
sometimes ExpandIntRes_Shift may be called with a node whose
second operand is a type that is larger than that. This leads to
an ABI mismatch, and for example causes a spurious zeroing of
a register in RV32 for 64-bit shifts. Note that at present regular
shift intstructions already have their shift amount operand adapted
at SelectionDAGBuilder::visitShift time, and funnelled shifts bypass that.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D110508
Based on the reasoning of D53903, register operands of DBG_VALUE are
invariably treated as RegState::Debug operands. This change enforces
this invariant as part of MachineInstr::addOperand so that all passes
emit this flag consistently.
RegState::Debug is inconsistently set on DBG_VALUE registers throughout
LLVM. This runs the risk of a filtering iterator like
MachineRegisterInfo::reg_nodbg_iterator to process these operands
erroneously when not parsed from MIR sources.
This issue was observed in the development of the llvm-mos fork which
adds a backend that relies on physical register operands much more than
existing targets. Physical RegUnit 0 has the same numeric encoding as
$noreg (indicating an undef for DBG_VALUE). Allowing debug operands into
the machine scheduler correlates $noreg with RegUnit 0 (i.e. a collision
of register numbers with different zero semantics). Eventually, this
causes an assert where DBG_VALUE instructions are prohibited from
participating in live register ranges.
Reviewed By: MatzeB, StephenTozer
Differential Revision: https://reviews.llvm.org/D110105
As described on D111049, we're trying to remove the <string> dependency from error handling and replace uses of report_fatal_error(const std::string&) with the Twine() variant which can be forward declared.
We were previously silently generating incorrect code when extracting a
fixed-width vector from a scalable vector. This is worse than crashing,
since the user will have no indication that this is currently unsupported
behaviour. I have fixed the code to only perform DAG combines when safe
to do so, i.e. the input and output vectors are both fixed-width or
both scalable.
Test added here:
CodeGen/AArch64/sve-extract-scalable-vector.ll
Differential revision: https://reviews.llvm.org/D110624
As described on D111049, we're trying to remove the <string> dependency from error handling and replace uses of report_fatal_error(const std::string&) with the Twine() variant which can be forward declared.
We can use the raw_string_ostream::str() method to perform the implicit flush() and return a reference to the std::string container that we can then wrap inside Twine().
Deriving NoAlias based on having the same index in two BaseIndexOffset
expressions seemed weird (and as shown in the added unittest the
correctness of doing so depended on undocumented pre-conditions that
the user of BaseIndexOffset::computeAliasing would need to take care
of.
This patch removes the code that dereived NoAlias based on indices
being the same. As a compensation, to avoid regressions/diffs in
various lit test, we also add a new check. The new check derives
NoAlias in case the two base pointers are based on two different
GlobalValue:s (neither of them being a GlobalAlias).
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D110256
This fixes a bug detected in DAGCombiner when using global alias
variables. Here is an example:
@foo = global i16 0, align 1
@aliasFoo = alias i16, i16 * @foo
define i16 @bar() {
...
store i16 7, i16 * @foo, align 1
store i16 8, i16 * @aliasFoo, align 1
...
}
BaseIndexOffset::computeAliasing would incorrectly derive NoAlias
for the two accesses in the example above, resulting in DAGCombiner
miscompiles.
This patch fixes the problem by a defensive approach letting
BaseIndexOffset::computeAliasing return false, i.e. that the aliasing
couldn't be determined, when comparing two global values and at least
one is a GlobalAlias. In the future we might improve this with a
deeper analysis to look at the aliasee for the GlobalAlias etc. But
that is a bit more complicated considering that we could have
'local_unnamed_addr' and situations with several 'alias' variables.
Fixes PR51878.
Differential Revision: https://reviews.llvm.org/D110064
This is a port of the feature that allows the StackProtector pass to omit
checking code for stack canary checks, and rely on SelectionDAG to do it at a
later stage. The reasoning behind this seems to be to prevent the IR checking
instructions from hindering tail-call optimizations during codegen.
Here we allow GlobalISel to also use that scheme. Doing so requires that we
do some analysis using some factored-out code to determine where to generate
code for the epilogs.
Not every case is handled in this patch since we don't have support for all
targets that exercise different stack protector schemes.
Differential Revision: https://reviews.llvm.org/D98200
Victor Perez