The "-fzero-call-used-regs" option tells the compiler to zero out
certain registers before the function returns. It's also available as a
function attribute: zero_call_used_regs.
The two upper categories are:
- "used": Zero out used registers.
- "all": Zero out all registers, whether used or not.
The individual options are:
- "skip": Don't zero out any registers. This is the default.
- "used": Zero out all used registers.
- "used-arg": Zero out used registers that are used for arguments.
- "used-gpr": Zero out used registers that are GPRs.
- "used-gpr-arg": Zero out used GPRs that are used as arguments.
- "all": Zero out all registers.
- "all-arg": Zero out all registers used for arguments.
- "all-gpr": Zero out all GPRs.
- "all-gpr-arg": Zero out all GPRs used for arguments.
This is used to help mitigate Return-Oriented Programming exploits.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D110869
Previously, all children would be checked to see if any were an
explicit Register. If anywhere no commutable patterns would be
generated. This patch loosens the restriction to only check the
children that are being commuted.
Digging back through history, this code predates the existence of
commutable intrinsics and commutable SDNodes with more than 2
operands. At that time the loop would count the number of children that
weren't registers and if that was equal to 2 it would allow commuting.
I don't think this loop was re-considered when commutable
intrinsics were added or when we allowed SDNodes with more than 2
operands.
This important for RISCV were our isel patterns have a V0 mask
operand after the commutable operands on some RISCVISD opcodes.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D117955
Make the check for a complete SchedModel work as expected: report any
supported instruction not having scheduler info.
For unclear reasons there was a variable 'HadCompleteModel' that caused
e.g. new instructions for a new subtarget not to be reported. This variable
is now simply removed as all in-tree targets seem to build fine without it.
Review: Simon Pilgrim
Differential Revision: https://reviews.llvm.org/D118628
Based on the output of include-what-you-use.
It's an utility directory, so no much impact on other code areas.
clang++ -E -Iinclude -I../llvm/include ../llvm/utils/TableGen/*.cpp -std=c++14 -fno-rtti -fno-exceptions | wc -l
before: 4327274
after: 4316190
Related discourse thread: https://llvm.discourse.group/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D118466
Due to a bad merge we ended up with duplicate entries in our
downstream repo. I was surprised that nothing caught it. I wrote
this check so I could fix our downstream repo and figured I might
as well share it.
Reviewed By: RKSimon, spatel
Differential Revision: https://reviews.llvm.org/D118497
Based on the output of include-what-you-use. No big deal here, it's a utils
library and it doesn't seem to be used a lot across the codebase.
$ clang++ -E -Iinclude -I../llvm/include ../llvm/utils/TableGen/GlobalISel/*.cpp -std=c++14 -fno-rtti -fno-exceptions | wc -l
before: 573143
after: 568908
Related Discourse thread: https://llvm.discourse.group/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D118375
This change is to fix a link time error when building llvm with msvc.
MSVC's implementation does not support weak hook or lsan so this change
disables lsan's weak hook definition.
Only GCC supports LSan.
Tested with visual studio 2019 v16.9.6
Reviewed By: aaron.ballman, rnk
Differential Revision: https://reviews.llvm.org/D118162
This reverts commit ef82063207.
- It conflicts with the existing llvm::size in STLExtras, which will now
never be called.
- Calling it without llvm:: breaks C++17 compat
LLVM Programmer’s Manual strongly discourages the use of `std::vector<bool>` and suggests `llvm::BitVector` as a possible replacement.
This patch does just that for llvm.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D117121
This is often used for anonymous definitions, so we were sorting by
"anonymous_1234" record names, which while less bad than pointers can be easily
perturbed by adding code even in completely unrelated systems. That causes test
failures on AArch64 when sysregs with multiple valid names suddenly start
printing a different one.
This reverts commit fd4808887e.
This patch causes gcc to issue a lot of warnings like:
warning: base class ‘class llvm::MCParsedAsmOperand’ should be
explicitly initialized in the copy constructor [-Wextra]
Since 65b13610a5, raw_string_ostream has
been unbuffered by default. Based on an audit of llvm/utils/, this
commit removes every call to `raw_string_ostream::flush()` and any call
to `raw_string_ostream::str()` whose result is ignored or that doesn't
help with clarity.
I left behind a few calls to `str()`. In these cases, the underlying
std::string was declared pretty far away and never used again, whereas
stream recently had its last write. The code is easier to read as-is;
the no-op call to `flush()` inside `str()` isn't harmful, and when
https://reviews.llvm.org/D115421 lands it'll be gone anyway.
This patch implements the intrinsic for ref.null.
In the process of implementing int_wasm_ref_null_func() and
int_wasm_ref_null_extern() intrinsics, it removes the redundant
HeapType.
This also causes the textual assembler syntax for ref.null to
change. Instead of receiving an argument: `func` or `extern`, the
instruction mnemonic is either ref.null_func or ref.null_extern,
without the need for a further operand.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D114979
Add generic support for vec3 types, and in particular define
llvm_v3f32_ty which will be used by AMDGPU's
llvm.amdgcn.image.bvh.intersect.ray intrinsic.
Differential Revision: https://reviews.llvm.org/D114956
When used as a non-leaf node, TableGen does not currently use the type
of a ComplexPattern for type inference, which also means it does not
check it doesn't conflict with the use. This differs from when used as a
leaf value, where the type is used for inference. This addresses that
discrepancy. The test case is not representative of most real-world uses
but is sufficient to demonstrate inference is working.
Some of these uses also make use of ValueTypeByHwMode rather than
SimpleValueType and so the existing type inference is extended to
support that alongside the new type inference.
There are also currently various cases of using ComplexPatterns with an
untyped type, but only for non-leaf nodes. For compatibility this is
permitted, and uses the old behaviour of not inferring for non-leaf
nodes, but the existing logic is still used for leaf values. This
remaining discrepancy should eventually be eliminated, either by
removing all such uses of untyped so the special case goes away (I
imagine Any, or a more specific type in certain cases, would be
perfectly sufficient), or by copying it to the leaf value case so
they're consistent with one another if this is something that does need
to keep being supported.
All non-experimental targets have been verified to produce bit-for-bit
identical TableGen output with this change applied.
Reviewed By: kparzysz
Differential Revision: https://reviews.llvm.org/D109035
Not only RISCV but also other target such as CSKY, there are compressed instructions mixed with normal instructions.
To reuse the basic infra to compress/uncompress and predict instruction, we need reconstruct the RISCVCompressInstEmitter
and make it more general and suitable for other target.
Differential Revision: https://reviews.llvm.org/D113475
Implement two builtins to pack/unpack IBM extended long double float,
according to GCC 'Basic PowerPC Builtin Functions Available ISA 2.05'.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D112055
During rule optimization, identical SameOperandMatchers are hoisted into a common group,
however previously only one operand index was considered.
Commutable patterns can introduce SameOperandMatcher checks where the second index is commuted,
resulting in a different check that cannot be hoisted.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D111506
This patch fixes invalid syntax of generated code for InstrMapping
that has multiple columns and values.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D111962
This patch is to order the AVX instructions ahead of AVX512 instructions
in the matching table so that the AVX instructions can be matched first.
Thanks Craig and Shengchen for the idea.
Differential Revision: https://reviews.llvm.org/D111538
We are seeing extremely long time in building AMDGPUInstPrinter.cpp
when profile instrumentation is enabled: It takes more than 5 minutes
(compared to ~8 seconds in non-instrument build).
This caused by the huge statements in printInstruction functions. In
profile instrumentation build, we need have extra control flow to
differentiate each case statement. This in turn adds significant
compile time in block placement and branch folding.
Function printInstruction is not likely to benefit from PGO build
as it's rarely executed in a typical compilation. So here I disable
the profile instrumentation for this function.
Differential Revision: https://reviews.llvm.org/D111682
The operand of the second any_of in EnforceSmallerThan should be
B not S like the FP code in the if below.
Unfortunately, fixing that causes an infinite loop in the build
of RISCV. So I've added a workaround for that as well.
Fixes PR44768.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111502
As described on D111049, we're trying to remove the <string> dependency from error handling. In most cases the plan is to use the Twine() variant directly but to reduce introducing additional headers for the generated files, I'm using the const char* variant here instead.
Stop using APInt constructors and methods that were soft-deprecated in
D109483. This fixes all the uses I found in llvm, except for the APInt
unit tests which should still test the deprecated methods.
Differential Revision: https://reviews.llvm.org/D110807
Tablegen currently expects targets to have at least one
pressure set for every broader register category. AMDGPU's
VGPR or AGPR, for instance, seemed to work correctly without
any pset, though we have forced one for each type to avoid
the assertion in computeRegUnitSets. However, psets can not
be entirely empty. At least one set is mandatory for every
target. This patch bypasses the assertion for the classes
when GeneratePressureSet is zero while ensuring the
RegUnitSets are not empty.
Reviewed By: arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D110305
This is also a bug. The VK[1/2/4/8/16]PAIR here should be VK[1/2/4/8/16]Pair which has its
custom PrintMethod and ParserMatchClass. However we don't have any instructions using vvvv
and ModR/M.REG field so this issue is not exposed.
Differential Revision: https://reviews.llvm.org/D109564
Analogous to the TSFlags for machine instructions, this
patch introduces a bit vector for register classes to have
target specific flags that become a tablegened value in
TargetRegisterClass.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D108767
CodeGenMapTable.cpp refers to TableGen as TabelGen in the comments. This appears to be a typo. This patch fixes the typo.
Differential Revision: https://reviews.llvm.org/D76343
Adds MVT::i64x8, a Machine Value Type needed for lowering inline assembly
operands which materialize a sequence of eight general purpose registers.
Differential Revision: https://reviews.llvm.org/D94096
When setting Allocatable on a generated register class check all
superclasses and set Allocatable true if any superclass is
allocatable.
Without this change generated register classes based on an
allocatable class may end up unallocatable due to the topological
inheritance order.
This change primarily effects AMDGPU backend; however, there are
a few changes in MIPs GlobalISel register constraints as a result.
Reviewed By: kparzysz
Differential Revision: https://reviews.llvm.org/D105967