If we're going to assume references are dereferenceable, we should also
assume they're aligned: otherwise, we can't actually dereference them.
See also D80072.
Differential Revision: https://reviews.llvm.org/D80166
This patch adds a matrix type to Clang as described in the draft
specification in clang/docs/MatrixSupport.rst. It introduces a new option
-fenable-matrix, which can be used to enable the matrix support.
The patch adds new MatrixType and DependentSizedMatrixType types along
with the plumbing required. Loads of and stores to pointers to matrix
values are lowered to memory operations on 1-D IR arrays. After loading,
the loaded values are cast to a vector. This ensures matrix values use
the alignment of the element type, instead of LLVM's large vector
alignment.
The operators and builtins described in the draft spec will will be added in
follow-up patches.
Reviewers: martong, rsmith, Bigcheese, anemet, dexonsmith, rjmccall, aaron.ballman
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D72281
test cases
Add support for #pragma float_control
Reviewers: rjmccall, erichkeane, sepavloff
Differential Revision: https://reviews.llvm.org/D72841
This reverts commit 85dc033cac, and makes
corrections to the test cases that failed on buildbots.
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
This reverts commit 61ba1481e2.
I'm reverting this because it breaks the lldb build with
incomplete switch coverage warnings. I would fix it forward,
but am not familiar enough with lldb to determine the correct
fix.
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:3958:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
^
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:4633:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
^
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:4889:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
Introduction/Motivation:
LLVM-IR supports integers of non-power-of-2 bitwidth, in the iN syntax.
Integers of non-power-of-two aren't particularly interesting or useful
on most hardware, so much so that no language in Clang has been
motivated to expose it before.
However, in the case of FPGA hardware normal integer types where the
full bitwidth isn't used, is extremely wasteful and has severe
performance/space concerns. Because of this, Intel has introduced this
functionality in the High Level Synthesis compiler[0]
under the name "Arbitrary Precision Integer" (ap_int for short). This
has been extremely useful and effective for our users, permitting them
to optimize their storage and operation space on an architecture where
both can be extremely expensive.
We are proposing upstreaming a more palatable version of this to the
community, in the form of this proposal and accompanying patch. We are
proposing the syntax _ExtInt(N). We intend to propose this to the WG14
committee[1], and the underscore-capital seems like the active direction
for a WG14 paper's acceptance. An alternative that Richard Smith
suggested on the initial review was __int(N), however we believe that
is much less acceptable by WG14. We considered _Int, however _Int is
used as an identifier in libstdc++ and there is no good way to fall
back to an identifier (since _Int(5) is indistinguishable from an
unnamed initializer of a template type named _Int).
[0]https://www.intel.com/content/www/us/en/software/programmable/quartus-prime/hls-compiler.html)
[1]http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2472.pdf
Differential Revision: https://reviews.llvm.org/D73967
Now compiler defines 5 sets of constants to represent rounding mode.
These are:
1. `llvm::APFloatBase::roundingMode`. It specifies all 5 rounding modes
defined by IEEE-754 and is used in `APFloat` implementation.
2. `clang::LangOptions::FPRoundingModeKind`. It specifies 4 of 5 IEEE-754
rounding modes and a special value for dynamic rounding mode. It is used
in clang frontend.
3. `llvm::fp::RoundingMode`. Defines the same values as
`clang::LangOptions::FPRoundingModeKind` but in different order. It is
used to specify rounding mode in in IR and functions that operate IR.
4. Rounding mode representation used by `FLT_ROUNDS` (C11, 5.2.4.2.2p7).
Besides constants for rounding mode it also uses a special value to
indicate error. It is convenient to use in intrinsic functions, as it
represents platform-independent representation for rounding mode. In this
role it is used in some pending patches.
5. Values like `FE_DOWNWARD` and other, which specify rounding mode in
library calls `fesetround` and `fegetround`. Often they represent bits
of some control register, so they are target-dependent. The same names
(not values) and a special name `FE_DYNAMIC` are used in
`#pragma STDC FENV_ROUND`.
The first 4 sets of constants are target independent and could have the
same numerical representation. It would simplify conversion between the
representations. Also now `clang::LangOptions::FPRoundingModeKind` and
`llvm::fp::RoundingMode` do not contain the value for IEEE-754 rounding
direction `roundTiesToAway`, although it is supported natively on
some targets.
This change defines all the rounding mode type via one `llvm::RoundingMode`,
which also contains rounding mode for IEEE rounding direction `roundTiesToAway`.
Differential Revision: https://reviews.llvm.org/D77379
The problem was reported in PR45468, applying target features to an
always_inline constructor/destructor runs afoul of GlobalDecl
construction assert when checking for target-feature compatibility.
The core problem is fixed by using the version of the check that takes a
FunctionDecl rather than the GlobalDecl. However, while writing the
test, I discovered that source locations weren't properly set for this
check on ctors/dtors. This patch also fixes constructors and CALLED destructors.
Unfortunately, it doesn't seem too possible to get a meaningful source
location for a 'cleanup' destructor, so those are still 'frontend' level
errors unfortunately. A fixme was added to the test to cover that
situation.
Summary: This allows instrumenting things like global initializers
Reviewers: dberris, MaskRay, smeenai
Subscribers: cfe-commits, johnislarry
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77191
This patch adds 'q' to mean 'scalable vector' in the builtin
type string, and for SVE will return the matching builtin
type as defined in the C/C++ language extensions for SVE.
This patch also adds some scaffolding to generate the arm_sve.h
header file, and some builtin definitions (+CodeGen) to be able
to implement some simple masked load intrinsics that use the
ACLE types, such as:
svint8_t test_svld1_s8(svbool_t pg, const int8_t *base) {
return svld1_s8(pg, base);
}
Reviewers: efriedma, rjmccall, rovka, rsandifo-arm, rengolin
Reviewed By: efriedma
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75298
norecurse function attr indicates the function is not called recursively
directly or indirectly.
Add norecurse to OpenCL functions, SYCL functions in device compilation
and CUDA/HIP kernels.
Although there is LLVM pass adding norecurse to functions, it only works
for whole-program compilation. Also FE adding norecurse can make that
pass run faster since functions with norecurse do not need to be checked
again.
Differential Revision: https://reviews.llvm.org/D73651
Reapply 8a56d64d76 with minor fixes.
The problem was that cancellation can cause new edges to the parallel
region exit block which is not outlined. The CodeExtractor will encode
the information which "exit" was taken as a return value. The fix is to
ensure we do not return any value from the outlined function, to prevent
control to value conversion we ensure a single exit block for the
outlined region.
This reverts commit 3aac953afa.
In order to fix PR44560 and to prepare for loop transformations we now
finalize a function late, which will also do the outlining late. The
logic is as before but the actual outlining step happens now after the
function was fully constructed. Once we have loop transformations we
can apply them in the finalize step before the outlining.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D74372
The function attributes xray-skip-entry, xray-skip-exit, and
xray-ignore-loops were only being applied if a function had an
xray-instrument attribute, but they should apply if xray is enabled
globally too.
Differential Revision: https://reviews.llvm.org/D73842
Extend -fxray-instrumentation-bundle to split function-entry and
function-exit into two separate options, so that it is possible to
instrument only function entry or only function exit. For use cases
that only care about one or the other this will save significant overhead
and code size.
Differential Revision: https://reviews.llvm.org/D72890
XRay allows tuning by minimum function size, but also always instruments
functions with loops in them. If the minimum function size is set to a
large value the loop instrumention ends up causing most functions to be
instrumented anyway. This adds a new flag, -fxray-ignore-loops, to disable
the loop detection logic.
Differential Revision: https://reviews.llvm.org/D72873
The option will limit debug info by only emitting complete class
type information when its constructor is emitted.
This patch changes comparisons with LimitedDebugInfo to use the new
level instead.
Differential Revision: https://reviews.llvm.org/D72427
In the backend, this feature is implemented with the function attribute
"patchable-function-entry". Both the attribute and XRay use
TargetOpcode::PATCHABLE_FUNCTION_ENTER, so the two features are
incompatible.
Reviewed By: ostannard, MaskRay
Differential Revision: https://reviews.llvm.org/D72222
This feature is generic. Make it applicable for AArch64 and X86 because
the backend has only implemented NOP insertion for AArch64 and X86.
Reviewed By: nickdesaulniers, aaron.ballman
Differential Revision: https://reviews.llvm.org/D72221
The validateOutputSize and validateInputSize need to check whether
AVX or AVX512 are enabled. But this can be affected by the
target attribute so we need to factor that in.
This patch moves some of the code from CodeGen to create an
appropriate feature map that we can pass to the function.
Differential Revision: https://reviews.llvm.org/D68627
GCC's x86 and s390 ports support -mrecord-mcount. Other ports reject the
option.
aarch64-linux-gnu-gcc: error: unrecognized command line option ‘-mrecord-mcount’
Allowing this option can cause failures when building Linux kernel for
aarch64, powerpc64, etc, which will think the feature is available if
the clang command returns 0.
Recognize -mrecord-mcount from the command line and add a function attribute
"mrecord-mcount" when passed.
Only valid on SystemZ (when used with -mfentry).
Review: Ulrich Weigand
https://reviews.llvm.org/D71627
Let the "mnop-mcount" function attribute simply be present or non-present.
Update SystemZ backend as well to use hasFnAttribute() instead.
Review: Ulrich Weigand
https://reviews.llvm.org/D71669
Recognize -mpacked-stack from the command line and add a function attribute
"mpacked-stack" when passed. This is needed for building the Linux kernel.
If this option is passed for any other target than SystemZ, an error is
generated.
Review: Ulrich Weigand
https://reviews.llvm.org/D71441
The validateOutputSize and validateInputSize need to check whether
AVX or AVX512 are enabled. But this can be affected by the
target attribute so we need to factor that in.
This patch copies some of the code from CodeGen to create an
appropriate feature map that we can pass to the function. Probably
need some refactoring here to share more code with Codegen. Is
there a good place to do that? Also need to support the cpu_specific
attribute as well.
Differential Revision: https://reviews.llvm.org/D68627
This unbreaks the debuginfo-tests testsuite by replacing the assertion
with a default location. There are cleanups in helper functions that
don't have a valid source location such as block copy helpers and it's
not worth tracking each of them down.
rdar://57630879
Patch was reverted because https://bugs.llvm.org/show_bug.cgi?id=44048
The original patch is modified to set the strictfp IR attribute
explicitly in CodeGen instead of as a side effect of IRBuilder.
In the 2nd attempt to reapply there was a windows lit test fail, the
tests were fixed to use wildcard matching.
Differential Revision: https://reviews.llvm.org/D62731
AggValueSlot
This reapplies 8a5b7c3570 after a null
dereference bug in CGOpenMPRuntime::emitUserDefinedMapper.
Original commit message:
This is needed for the pointer authentication work we plan to do in the
near future.
a63a81bd99/clang/docs/PointerAuthentication.rst
checkTargetFeatures was incorrectly checking for cpu_specific instead of
just 'target'. While this function was never called in that situation,
it seemed correct to fix the condition. Additionally, multiversion
functions can never be always_inline, but if any function accidentially
ended up here we shouldn't diagnose.
Note that the adding of target-features to the list is unnecessary since
the getFunctionFeatureMap actually considers attribute target,
however adding it results in significantly better error messages by
putting the 'target' features first (and thus first to fail).
Otherwise, the error message would be the first feature 'implied' by the
target attribute, and not necessarily the feature listed in the
attribute itself.
and a follow-up NFC rearrangement as it's causing a crash on valid. Testcase is on the original review thread.
This reverts commits af57dbf12e and e6584b2b7b
Enumerations that describe rounding mode and exception behavior were
defined inside ConstrainedFPIntrinsic. It makes sense to use the same
definitions to represent the same properties in other cases, not only
in constrained intrinsics. It was however inconvenient as required to
include constrained intrinsics definitions even if they were not needed.
Also using long scope prefix reduced readability.
This change moves these definitioins to the namespace llvm::fp.
No functional changes.
Differential Revision: https://reviews.llvm.org/D69552
This patch is motivated by (and factored out from)
https://reviews.llvm.org/D66121 which is a debug info bugfix. Starting
with DWARF 5 all Objective-C methods are nested inside their
containing type, and that patch implements this for synthesized
Objective-C properties.
1. SemaObjCProperty populates a list of synthesized accessors that may
need to inserted into an ObjCImplDecl.
2. SemaDeclObjC::ActOnEnd inserts forward-declarations for all
accessors for which no override was provided into their
ObjCImplDecl. This patch does *not* synthesize AST function
*bodies*. Moving that code from the static analyzer into Sema may
be a good idea though.
3. Places that expect all methods to have bodies have been updated.
I did not update the static analyzer's inliner for synthesized
properties to point back to the property declaration (see
test/Analysis/Inputs/expected-plists/nullability-notes.m.plist), which
I believed to be more bug than a feature.
Differential Revision: https://reviews.llvm.org/D68108
rdar://problem/53782400
Add options to control floating point behavior: trapping and
exception behavior, rounding, and control of optimizations that affect
floating point calculations. More details in UsersManual.rst.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D62731
Recognize -mnop-mcount from the command line and add a function attribute
"mnop-mcount"="true" when passed.
When this option is used, a nop is added instead of a call to fentry. This
is used when building the Linux Kernel.
If this option is passed for any other target than SystemZ, an error is
generated.
Review: Ulrich Weigand
https://reviews.llvm.org/D67763
This reverts commit 004ed2b0d1.
Original commit hash 6d03890384
Summary:
This adds a clang option to disable inline line tables. When it is used,
the inliner uses the call site as the location of the inlined function instead of
marking it as an inline location with the function location.
https://reviews.llvm.org/D67723
Summary:
This adds a clang option to disable inline line tables. When it is used,
the inliner uses the call site as the location of the inlined function instead of
marking it as an inline location with the function location.
See https://bugs.llvm.org/show_bug.cgi?id=42344
Reviewers: rnk
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D67723
The behavior from the original patch has changed, since we're no longer
allowing LLVM to just ignore the alignment. Instead, we're just
assuming the maximum possible alignment.
Differential Revision: https://reviews.llvm.org/D68824
llvm-svn: 374562
The test fails on Windows, with
error: 'warning' diagnostics expected but not seen:
File builtin-assume-aligned.c Line 62: requested alignment
must be 268435456 bytes or smaller; assumption ignored
error: 'warning' diagnostics seen but not expected:
File builtin-assume-aligned.c Line 62: requested alignment
must be 8192 bytes or smaller; assumption ignored
llvm-svn: 374456
Code to handle __builtin_assume_aligned was allowing larger values, but
would convert this to unsigned along the way. This patch removes the
EmitAssumeAligned overloads that take unsigned to do away with this
problem.
Additionally, it adds a warning that values greater than 1 <<29 are
ignored by LLVM.
Differential Revision: https://reviews.llvm.org/D68824
llvm-svn: 374450
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Reviewers: hfinkel, lattner, rkruppe, greened, rovka, rengolin, sdesmalen
Reviewed By: rovka, sdesmalen
Differential Revision: https://reviews.llvm.org/D53137
llvm-svn: 374042
The previous version of this used CurFuncDecl in CodeGenFunction,
however this doesn't include lambdas. However, CurCodeDecl DOES. Switch
the check to use CurCodeDecl so that the actual function being emitted
gets checked, preventing an error in ISEL.
llvm-svn: 370261
Summary:
As explained in http://lists.llvm.org/pipermail/llvm-dev/2018-March/121924.html,
the LLVM coroutines transforms are not yet able to move the
instructions for UBSan null checking past coroutine suspend boundaries.
For now, disable all UBSan checks when generating code for coroutines
functions.
I also considered an approach where only '-fsanitize=null' would be disabled,
However in practice this led to other LLVM errors when writing object files:
"Cannot represent a difference across sections". For now, disable all
UBSan checks until coroutine transforms are updated to handle them.
Test Plan:
1. check-clang
2. Compile the program in https://gist.github.com/modocache/54a036c3bf9c06882fe85122e105d153
using the '-fsanitize=null' option and confirm it does not crash
during LLVM IR generation.
Reviewers: GorNishanov, vsk, eric_niebler, lewissbaker
Reviewed By: vsk
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D44672
llvm-svn: 368675
The default behavior of Clang's indirect function call checker will replace
the address of each CFI-checked function in the output file's symbol table
with the address of a jump table entry which will pass CFI checks. We refer
to this as making the jump table `canonical`. This property allows code that
was not compiled with ``-fsanitize=cfi-icall`` to take a CFI-valid address
of a function, but it comes with a couple of caveats that are especially
relevant for users of cross-DSO CFI:
- There is a performance and code size overhead associated with each
exported function, because each such function must have an associated
jump table entry, which must be emitted even in the common case where the
function is never address-taken anywhere in the program, and must be used
even for direct calls between DSOs, in addition to the PLT overhead.
- There is no good way to take a CFI-valid address of a function written in
assembly or a language not supported by Clang. The reason is that the code
generator would need to insert a jump table in order to form a CFI-valid
address for assembly functions, but there is no way in general for the
code generator to determine the language of the function. This may be
possible with LTO in the intra-DSO case, but in the cross-DSO case the only
information available is the function declaration. One possible solution
is to add a C wrapper for each assembly function, but these wrappers can
present a significant maintenance burden for heavy users of assembly in
addition to adding runtime overhead.
For these reasons, we provide the option of making the jump table non-canonical
with the flag ``-fno-sanitize-cfi-canonical-jump-tables``. When the jump
table is made non-canonical, symbol table entries point directly to the
function body. Any instances of a function's address being taken in C will
be replaced with a jump table address.
This scheme does have its own caveats, however. It does end up breaking
function address equality more aggressively than the default behavior,
especially in cross-DSO mode which normally preserves function address
equality entirely.
Furthermore, it is occasionally necessary for code not compiled with
``-fsanitize=cfi-icall`` to take a function address that is valid
for CFI. For example, this is necessary when a function's address
is taken by assembly code and then called by CFI-checking C code. The
``__attribute__((cfi_jump_table_canonical))`` attribute may be used to make
the jump table entry of a specific function canonical so that the external
code will end up taking a address for the function that will pass CFI checks.
Fixes PR41972.
Differential Revision: https://reviews.llvm.org/D65629
llvm-svn: 368495
Add "memtag" sanitizer that detects and mitigates stack memory issues
using armv8.5 Memory Tagging Extension.
It is similar in principle to HWASan, which is a software implementation
of the same idea, but there are enough differencies to warrant a new
sanitizer type IMHO. It is also expected to have very different
performance properties.
The new sanitizer does not have a runtime library (it may grow one
later, along with a "debugging" mode). Similar to SafeStack and
StackProtector, the instrumentation pass (in a follow up change) will be
inserted in all cases, but will only affect functions marked with the
new sanitize_memtag attribute.
Reviewers: pcc, hctim, vitalybuka, ostannard
Subscribers: srhines, mehdi_amini, javed.absar, kristof.beyls, hiraditya, cryptoad, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64169
llvm-svn: 366123
A handful of C++ cases as reported in PR42352 didn't actually give an
error when always_inlining with a different target feature list. This
resulted in broken IR.
llvm-svn: 364109
representing no such object, and an "Indeterminate" state representing
an uninitialized object. The latter is not yet used, but soon will be.
llvm-svn: 361328
We need to be able to enqueue internal function that initializes
global constructors on the host side. Therefore it has to be
converted to a kernel.
This change factors out common logic for adding kernel metadata
and moves it from CodeGenFunction to CodeGenModule in order to
make it accessible for the extra use case.
Differential revision: https://reviews.llvm.org/D61488
llvm-svn: 360342
If an address_space attribute is defined in a macro, print the macro instead
when diagnosing a warning or error for incompatible pointers with different
address_spaces.
We allow this for all attributes (not just address_space), and for multiple
attributes declared in the same macro.
Differential Revision: https://reviews.llvm.org/D51329
llvm-svn: 359826
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
UB isn't nice. It's cool and powerful, but not nice.
Having a way to detect it is nice though.
[[ https://wg21.link/p1007r3 | P1007R3: std::assume_aligned ]] / http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p1007r2.pdf says:
```
We propose to add this functionality via a library function instead of a core language attribute.
...
If the pointer passed in is not aligned to at least N bytes, calling assume_aligned results in undefined behaviour.
```
This differential teaches clang to sanitize all the various variants of this assume-aligned attribute.
Requires D54588 for LLVM IRBuilder changes.
The compiler-rt part is D54590.
This is a second commit, the original one was r351105,
which was mass-reverted in r351159 because 2 compiler-rt tests were failing.
Reviewers: ABataev, craig.topper, vsk, rsmith, rnk, #sanitizers, erichkeane, filcab, rjmccall
Reviewed By: rjmccall
Subscribers: chandlerc, ldionne, EricWF, mclow.lists, cfe-commits, bkramer
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D54589
llvm-svn: 351177
Summary:
UB isn't nice. It's cool and powerful, but not nice.
Having a way to detect it is nice though.
[[ https://wg21.link/p1007r3 | P1007R3: std::assume_aligned ]] / http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p1007r2.pdf says:
```
We propose to add this functionality via a library function instead of a core language attribute.
...
If the pointer passed in is not aligned to at least N bytes, calling assume_aligned results in undefined behaviour.
```
This differential teaches clang to sanitize all the various variants of this assume-aligned attribute.
Requires D54588 for LLVM IRBuilder changes.
The compiler-rt part is D54590.
Reviewers: ABataev, craig.topper, vsk, rsmith, rnk, #sanitizers, erichkeane, filcab, rjmccall
Reviewed By: rjmccall
Subscribers: chandlerc, ldionne, EricWF, mclow.lists, cfe-commits, bkramer
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D54589
llvm-svn: 351105
Summary:
https://reviews.llvm.org/D54862 removed the usages of `ASTContext&` from
within the `CXXMethodDecl::getThisType` method. Remove the parameter
altogether, as well as all usages of it. This does not result in any
functional change because the parameter was unused since
https://reviews.llvm.org/D54862.
Test Plan: check-clang
Reviewers: akyrtzi, mikael
Reviewed By: mikael
Subscribers: mehdi_amini, dexonsmith, cfe-commits
Differential Revision: https://reviews.llvm.org/D56509
llvm-svn: 350914
This is exactly a "CreateBitCast", so refactor this to get rid of a
'new'.
Note that this slightly changes the test, as the Builder is now
seemingly smart enough to fold one of the bitcasts into the annotation
call.
Change-Id: I1733fb1fdf91f5c9d88651067130b9a4e7b5ab67
llvm-svn: 349506
The __builtin_unpredictable implementation is confused by any implicit
casts, which happen in C++. This patch strips those off so that
if/switch statements now work with it in C++.
Change-Id: I73c3bf4f1775cd906703880944f4fcdc29fffb0a
llvm-svn: 348969
Thunks that return member pointers via sret are broken due to using temporary
storage for the return value on the stack and then passing that pointer to a
tail call, violating the rule that a tail call can't access allocas in the
caller (see bug).
Since r90526, we put aggregate return values directly in the sret slot, but
this doesn't apply to member pointers which are considered scalar.
Unless I'm missing something subtle, we should be able to always use the sret
slot directly for indirect return values.
Differential revision: https://reviews.llvm.org/D55371
llvm-svn: 348569
It seems the two failing tests can be simply fixed after r348037
Fix 3 cases in Analysis/builtin-functions.cpp
Delete the bad CodeGen/builtin-constant-p.c for now
llvm-svn: 348053
Kept the "indirect_builtin_constant_p" test case in test/SemaCXX/constant-expression-cxx1y.cpp
while we are investigating why the following snippet fails:
extern char extern_var;
struct { int a; } a = {__builtin_constant_p(extern_var)};
llvm-svn: 348039
This was reverted in r347656 due to me thinking it caused a miscompile of
Chromium. Turns out it was the Chromium code that was broken.
llvm-svn: 347756
This caused a miscompile in Chrome (see crbug.com/908372) that's
illustrated by this small reduction:
static bool f(int *a, int *b) {
return !__builtin_constant_p(b - a) || (!(b - a));
}
int arr[] = {1,2,3};
bool g() {
return f(arr, arr + 3);
}
$ clang -O2 -S -emit-llvm a.cc -o -
g() should return true, but after r347417 it became false for some reason.
This also reverts the follow-up commits.
r347417:
> Re-Reinstate 347294 with a fix for the failures.
>
> Don't try to emit a scalar expression for a non-scalar argument to
> __builtin_constant_p().
>
> Third time's a charm!
r347446:
> The result of is.constant() is unsigned.
r347480:
> A __builtin_constant_p() returns 0 with a function type.
r347512:
> isEvaluatable() implies a constant context.
>
> Assume that we're in a constant context if we're asking if the expression can
> be compiled into a constant initializer. This fixes the issue where a
> __builtin_constant_p() in a compound literal was diagnosed as not being
> constant, even though it's always possible to convert the builtin into a
> constant.
r347531:
> A "constexpr" is evaluated in a constant context. Make sure this is reflected
> if a __builtin_constant_p() is a part of a constexpr.
llvm-svn: 347656
As suggested by Richard Smith, and initially put up for review here:
https://reviews.llvm.org/D53341, this patch removes a hack that was used
to ensure that proper target-feature lists were used when emitting
cpu-dispatch (and eventually, target-clones) implementations. As a part
of this, the GlobalDecl object is proliferated to a bunch more
locations.
Originally, this was put up for review (see above) to get acceptance on
the approach, though discussion with Richard in San Diego showed he
approved of the approach taken here. Thus, I believe this is acceptable
for Review-After-commit
Differential Revision: https://reviews.llvm.org/D53341
Change-Id: I0a0bd673340d334d93feac789d653e03d9f6b1d5
llvm-svn: 346757
Similar to how ICC handles CPU-Dispatch on Windows, this patch uses the
resolver function directly to forward the call to the proper function.
This is not nearly as efficient as IFuncs of course, but is still quite
useful for large functions specifically developed for certain
processors.
This is unfortunately still limited to x86, since it depends on
__builtin_cpu_supports and __builtin_cpu_is, which are x86 builtins.
The naming for the resolver/forwarding function for cpu-dispatch was
taken from ICC's implementation, which uses the unmodified name for this
(no mangling additions). This is possible, since cpu-dispatch uses '.A'
for the 'default' version.
In 'target' multiversioning, this function keeps the '.resolver'
extension in order to keep the default function keeping the default
mangling.
Change-Id: I4731555a39be26c7ad59a2d8fda6fa1a50f73284
Differential Revision: https://reviews.llvm.org/D53586
llvm-svn: 345298
The X86 backend will need to see the attribute to make decisions. If it isn't present the backend will have to assume large vectors may be present.
llvm-svn: 345237
This is a continuation of my patches to inform the X86 backend about what the largest IR types are in the function so that we can restrict the backend type legalizer to prevent 512-bit vectors on SKX when -mprefer-vector-width=256 is specified if no explicit 512 bit vectors were specified by the user.
This patch updates the vector width based on the argument and return types of the current function and from the types of any functions it calls. This is intended to make sure the backend type legalizer doesn't disturb any types that are required for ABI.
Differential Revision: https://reviews.llvm.org/D52441
llvm-svn: 345168
Summary:
Some lines have a hit counter where they should not have one.
Cleanup stuff is located to the last line of the body which is most of the time a '}'.
And Exception stuff is added at the beginning of a function and at the end (represented by '{' and '}').
So in such cases, the DebugLoc used in GCOVProfiling.cpp must be marked as not covered.
This patch is a followup of https://reviews.llvm.org/D49915.
Tests in projects/compiler_rt are fixed by: https://reviews.llvm.org/D49917
Reviewers: marco-c, davidxl
Reviewed By: marco-c
Subscribers: dblaikie, cfe-commits, sylvestre.ledru
Differential Revision: https://reviews.llvm.org/D49916
llvm-svn: 342717
Eli Friedman