This is an extension of the handling for unary intrinsics and
follows the logic that we use for binary ops.
We don't canonicalize to min/max intrinsics yet, but this might
help unlock other folds seen in D98152.
If we have a umul.with.overflow where the multiply result is not used and one of the operands is a constant, we can perform the overflow check cheaper with a comparison then by performing the multiply and extracting the overflow flag.
(Noticed when looking at the conditions SCEV emits for overflow checks.)
Differential Revision: https://reviews.llvm.org/D104665
This patch updates InstCombine to use poison constant to represent the resulting value of (either semantically or syntactically) unreachable instrs, or a don't-care value of an unreachable store instruction.
This allows more aggressive folding of unused results, as shown in llvm/test/Transforms/InstCombine/getelementptr.ll .
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D104602
This patch is an extension of D103421. It allows the InstCombiner to
generate the negated form of integer scalable-vector splats. It can
technically handle fixed-length vectors too but those are completely
covered by the preceding logic.
This enables extra combining opportunities for scalable vector types.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D103801
Currently all AA analyses marked as preserved are stateless, not taking
into account their dependent analyses. So there's no need to mark them
as preserved, they won't be invalidated unless their analyses are.
SCEVAAResults was the one exception to this, it was treated like a
typical analysis result. Make it like the others and don't invalidate
unless SCEV is invalidated.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D102032
These checks are not specific to the instruction based variant of
isPotentiallyReachable(), they are equally valid for the basic
block based variant. Move them there, to make sure that switching
between the instruction and basic block variants cannot introduce
regressions.
This change effectively reverts 86664638, but since there have been some changes on top and I wanted to leave the tests in, it's not a mechanical revert.
Why revert this now? Two main reasons:
1) There are continuing discussion around what the semantics of nofree. I am getting increasing uncomfortable with the seeming possibility we might redefine nofree in a way incompatible with these changes.
2) There was a reported miscompile triggered by this change (https://github.com/emscripten-core/emscripten/issues/9443). At first, I was making good progress on tracking down the issues exposed and those issues appeared to be unrelated latent bugs. Now that we've found at least one bug in the original change, and the investigation has stalled, I'm no longer comfortable leaving this in tree. In retrospect, I probably should have reverted this earlier and investigated the issues once the triggering change was out of tree.
This fixes a subtle and nasty bug in my 86664638. The problem is that free(nullptr) is well defined (and common).
The specification for the nofree attributes talks about memory objects, and doesn't explicitly address null, but I think it's reasonable to assume that nofree doesn't disallow a call to free(nullptr). If it did, we'd have to prove nonnull on an argument to ever infer nofree which doesn't seem to be the intent.
This was found by Nuno and Alive2 over in https://reviews.llvm.org/D100141#2697374.
Differential Revision: https://reviews.llvm.org/D100779
This patch clarifies the semantics of the nofree function attribute to make clear that it provides an "as if" semantic. That is, a nofree function is guaranteed not to free memory which existed before the call, but might allocate and then deallocate that same memory within the lifetime of the callee.
This is the result of the discussion on llvm-dev under the thread "Ambiguity in the nofree function attribute".
The most important part of this change is the LangRef wording. The rest is minor comment changes to emphasize the new semantics where code was accidentally consistent, and fix one place which wasn't consistent. That one place is currently narrowly used as it is primarily part of the ongoing (and not yet enabled) deref-at-point semantics work.
Differential Revision: https://reviews.llvm.org/D100141
Follow up to a6d2a8d6f5. These were found by simply grepping for "::assume", and are the subset of that result which looked cleaner to me using the isa/dyn_cast patterns.
Add the subclass, update a few places which check for the intrinsic to use idiomatic dyn_cast, and update the public interface of AssumptionCache to use the new class. A follow up change will do the same for the newer assumption query/bundle mechanisms.
Fixed section of code that iterated through a SmallDenseMap and added
instructions in each iteration, causing non-deterministic code; replaced
SmallDenseMap with MapVector to prevent non-determinism.
This reverts commit 01ac6d1587.
This caused non-deterministic compiler output; see comment on the
code review.
> This patch updates the various IR passes to correctly handle dbg.values with a
> DIArgList location. This patch does not actually allow DIArgLists to be produced
> by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
> Other than that, it should cover every IR pass.
>
> Most of the changes simply extend code that operated on a single debug value to
> operate on the list of debug values in the style of any_of, all_of, for_each,
> etc. Instances of setOperand(0, ...) have been replaced with with
> replaceVariableLocationOp, which takes the value that is being replaced as an
> additional argument. In places where this value isn't readily available, we have
> to track the old value through to the point where it gets replaced.
>
> Differential Revision: https://reviews.llvm.org/D88232
This reverts commit df69c69427.
This is an alternative to D98120. Herein, instead of deleting the transformation entirely, we check
that the underlying objects are both the same and therefore this transformation wouldn't incur a
provenance change, if applied.
https://alive2.llvm.org/ce/z/SYF_yv
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D98588
This removes some (but not all) uses of type-less CreateGEP()
and CreateInBoundsGEP() APIs, which are incompatible with opaque
pointers.
There are a still a number of tricky uses left, as well as many
more variation APIs for CreateGEP.
This patch updates the various IR passes to correctly handle dbg.values with a
DIArgList location. This patch does not actually allow DIArgLists to be produced
by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
Other than that, it should cover every IR pass.
Most of the changes simply extend code that operated on a single debug value to
operate on the list of debug values in the style of any_of, all_of, for_each,
etc. Instances of setOperand(0, ...) have been replaced with with
replaceVariableLocationOp, which takes the value that is being replaced as an
additional argument. In places where this value isn't readily available, we have
to track the old value through to the point where it gets replaced.
Differential Revision: https://reviews.llvm.org/D88232
This patch updates DbgVariableIntrinsics to support use of a DIArgList for the
location operand, resulting in a significant change to its interface. This patch
does not update all IR passes to support multiple location operands in a
dbg.value; the only change is to update the DbgVariableIntrinsic interface and
its uses. All code outside of the intrinsic classes assumes that an intrinsic
will always have exactly one location operand; they will still support
DIArgLists, but only if they contain exactly one Value.
Among other changes, the setOperand and setArgOperand functions in
DbgVariableIntrinsic have been made private. This is to prevent code from
setting the operands of these intrinsics directly, which could easily result in
incorrect/invalid operands being set. This does not prevent these functions from
being called on a debug intrinsic at all, as they can still be called on any
CallInst pointer; it is assumed that any code directly setting the operands on a
generic call instruction is doing so safely. The intention for making these
functions private is to prevent DIArgLists from being overwritten by code that's
naively trying to replace one of the Values it points to, and also to fail fast
if a DbgVariableIntrinsic is updated to use a DIArgList without a valid
corresponding DIExpression.
It's just a wrong thing to do.
We introduce inttoptr where there were none, which results in
loosing all provenance information because we no longer have a GEP{i,},
and pessimize all future optimizations,
because we are basically not allowed to look past `inttoptr`.
(gep i8* X, -(ptrtoint Y)) *is* the canonical form.
So just drop this fold.
Noticed while reviewing D98120.
This patch modifies TryToSinkInstruction in the InstCombine pass, to prevent
redundant debug intrinsics from being produced, and also prevent the intrinsics
from being emitted in an incorrect order. It does this by ensuring that when
this pass sinks an instruction and creates clones of the debug intrinsics that
use that instruction, it inserts those debug intrinsics in their original order,
and only inserts the last debug intrinsic for each variable in the Instruction's
block.
Differential revision: https://reviews.llvm.org/D95463
This patch simply implements the documented UB of the current nofree attributes as specified. It doesn't try to be fancy about inference (yet), it just implements the cases already specified and inferred.
Note: When this lands, it may expose miscompiles. If so, please revert and provide a test case. It's likely the bug is in the existing inference code and without a relatively complete test case, it will be hard to debug.
Differential Revision: https://reviews.llvm.org/D96349
The IR/MIR pseudo probe intrinsics don't get materialized into real machine instructions and therefore they don't incur runtime cost directly. However, they come with indirect cost by blocking certain optimizations. Some of the blocking are intentional (such as blocking code merge) for better counts quality while the others are accidental. This change unblocks perf-critical optimizations that do not affect counts quality. They include:
1. IR InstCombine, sinking load operation to shorten lifetimes.
2. MIR LiveRangeShrink, similar to #1
3. MIR TwoAddressInstructionPass, i.e, opeq transform
4. MIR function argument copy elision
5. IR stack protection. (though not perf-critical but nice to have).
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D95982
A @llvm.experimental.noalias.scope.decl is only useful if there is !alias.scope and !noalias metadata that uses the declared scope.
When that is not the case for at least one of the two, the intrinsic call can as well be removed.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D95141
Currently make_early_inc_range cannot be used with iterators with
operator* implementations that do not return a reference.
Most notably in the LLVM codebase, this means the User iterator ranges
cannot be used with make_early_inc_range, which slightly simplifies
iterating over ranges while elements are removed.
Instead of directly using BaseT::reference as return type of operator*,
this patch uses decltype to get the actual return type of the operator*
implementation in WrappedIteratorT.
This patch also updates a few places to use make use of
make_early_inc_range.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D93992
The source pointer type is not necessarily the same as the result
pointer type, so we can't simply return the original null pointer,
it might be a different one.
Effectively, this is what we were previously already doing when
the GEP was used in conjunction with a load or store, but this
fold can also be applied more generally:
> The only in bounds address for a null pointer in the default
> address-space is the null pointer itself.
If the source instruction has !annotation metadata, all instructions
created during combining should also have it. Tell the builder to
add it.
The !annotation system was discussed on llvm-dev as part of
'RFC: Combining Annotation Metadata and Remarks'
(http://lists.llvm.org/pipermail/llvm-dev/2020-November/146393.html)
This patch is based on an earlier patch by Francis Visoiu Mistrih.
Reviewed By: thegameg, lebedev.ri
Differential Revision: https://reviews.llvm.org/D91444
This patch extends IRBuilder to allow adding/preserving arbitrary
metadata on created instructions.
Instead of using references to specific metadata nodes (like DebugLoc),
IRbuilder now keeps a vector of (metadata kind, MDNode *) pairs, which
are added to each created instruction.
The patch itself is a NFC and only moves the existing debug location
handling over to the new system. In a follow-up patch it will be used to
preserve !annotation metadata besides !dbg.
The current approach requires iterating over MetadataToCopy to avoid
adding duplicates, but given that the number of metadata kinds to
copy/preserve is going to be very small initially (0, 1 (for !dbg) or 2
(!dbg and !annotation)) that should not matter.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D93400
When replacing an instruction with !annotation with a newly created
replacement, add the !annotation metadata to the replacement.
This mostly covers cases where the new instructions are created using
the ::Create helpers. Instructions created by IRBuilder will be handled
by D91444.
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D93399
The test is reduced from the example in D82005.
Similar to 94f6d365e, the test here would assert in
the DomTree when we tried to convert a select to a
phi with an unreachable block operand.
We may want to add some kind of guard code in DomTree
itself to avoid this sort of problem.
Summary:
AIX uses the existing EH infrastructure in clang and llvm.
The major differences would be
1. AIX do not have CFI instructions.
2. AIX uses a new personality routine, named __xlcxx_personality_v1.
It doesn't use the GCC personality rountine, because the
interoperability is not there yet on AIX.
3. AIX do not use eh_frame sections. Instead, it would use a eh_info
section (compat unwind section) to store the information about
personality routine and LSDA data address.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D91455
The types of SEH aren't x86(-32) vs x64 but rather stack-based exception chaining
vs table-based exception handling. x86-32 is the only arch for which Windows
uses the former. 32-bit ARM would use what is called Win64SEH today, which
is a bit confusing so instead let's just rename it to be a bit more clear.
Reviewed By: compnerd, rnk
Differential Revision: https://reviews.llvm.org/D90117
When InstCombine removes an alloca, it erases the dbg.{addr,declare}
instructions which refer to the alloca. It would be better to instead
remove all debug intrinsics which describe the contents of the dead
alloca, namely all dbg.value(<dead alloca>, ..., DW_OP_deref)'s.
This effectively undoes work performed in an InstCombine run earlier in
the pipeline by LowerDbgDeclare, which inserts DW_OP_deref dbg.values
before CallInst users of an alloca. The motivating example looks like:
```
define void @foo(i32 %0) {
%a = alloca i32 ; This alloca is erased.
store i32 %0, i32* %a
dbg.value(i32 %0, "arg0") ; This dbg.value survives.
dbg.value(i32* %a, "arg0", DW_OP_deref)
call void @trivially_inlinable_no_op(i32* %a)
ret void
}
```
If the DW_OP_deref dbg.value is not erased, it becomes dbg.value(undef)
after inlining, making "arg0" unavailable. But we already have dbg.value
descriptions of the alloca's value (from LowerDbgDeclare), so the
DW_OP_deref dbg.value cannot serve its purpose of describing an
initialization of the alloca by some callee. It invalidates other useful
dbg.values, causing large gaps in location coverage, so we should delete
it (even though doing so may cause stale dbg.values to appear, if
there's a dead store to `%a` in @trivially_inlinable_no_op).
OTOH, it wouldn't be correct to delete all dbg.value descriptions of an
alloca. Note that it's possible to describe a variable that takes on
different pointer values, e.g.:
```
void use(int *);
void t(int a, int b) {
int *local = &a; // dbg.value(i32* %a.addr, "local")
local = &b; // dbg.value(i32* undef, "local")
use(&a); // (note: %b.addr is optimized out)
local = &a; // dbg.value(i32* %a.addr, "local")
}
```
In this example, the alloca for "b" is erased, but we need to describe
the value of "local" as <unavailable> before the call to "use". This
prevents "local" from appearing to be equal to "&a" at the callsite.
rdar://66592859
Differential Revision: https://reviews.llvm.org/D85555
The test (currently crashing) is reduced from the example provided
in the post-commit discussion in D87149.
Differential Revision: https://reviews.llvm.org/D87965
See discussion in D87149. Dropping volatile stores here is legal
per LLVM semantics, but causes issues for real code and may result
in a change to LLVM volatile semantics. Temporarily treat volatile
stores as "not guaranteed to transfer execution" in just this place,
until this issue has been resolved.
Normal dead code elimination ignores assume intrinsics, so we fail to
delete assumes that are not meaningful (and potentially worse if they
cause conflicts with other assumptions).
The motivating example in https://llvm.org/PR47416 suggests that we
might have problems upstream from here (difference between C and C++),
but this should be a cheap way to make sure we remove more dead code.
Differential Revision: https://reviews.llvm.org/D87149
Sanjay Patel