This fixes a bug at LibCallSimplifier::optimizeMemChr which does the following transformation:
```
// memchr("\r\n", C, 2) != nullptr -> (1 << C & ((1 << '\r') | (1 << '\n')))
// != 0
// after bounds check.
```
As written above, a bounds check on C (whether it is less than integer bitwidth) is done before doing `1 << C` otherwise 1 << C will overflow.
If the bounds check is false, the result of (1 << C & ...) must not be used at all, otherwise the result of shift (which is poison) will contaminate the whole results.
A correct way to encode this is `select i1 (bounds check), (1 << C & ...), false` because select does not allow the unused operand to contaminate the result.
However, this optimization was introducing `and (bounds check), (1 << C & ...)` which cannot do that.
The bug was found from compilation of this C++ code: https://reviews.llvm.org/rG2fd3037ac615#1007197
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D104901
- When emitting libcalls, do not only pass the calling convention from the
function prototype but also the attributes.
- Do not pass attributes from e.g. libc memcpy to llvm.memcpy.
Review: Reid Kleckner, Eli Friedman, Arthur Eubanks
Differential Revision: https://reviews.llvm.org/D103992
This patch enables the salvaging of debug values that may be calculated
from more than one SSA value, such as with binary operators that do not
use a constant argument. The actual functionality for this behaviour is
added in a previous commit (c7270567), but with the ability to actually
emit the resulting debug values switched off.
The reason for this is that the prior patch has been reverted several
times due to issues discovered downstream, some time after the actual
landing of the patch. The patch in question is rather large and touches
several widely used header files, and all issues discovered are more
related to the handling of variadic debug values as a whole rather than
the details of the patch itself. Therefore, to minimize the build time
impact and risk of conflicts involved in any potential future
revert/reapply of that patch, this significantly smaller patch (that
touches no header files) will instead be used as the capstone to enable
variadic debug value salvaging.
The review linked to this patch is mostly implemented by the previous
commit, c7270567, but also contains the changes in this patch.
Differential Revision: https://reviews.llvm.org/D91722
This is a partial reapply of the original commit and the followup commit
that were previously reverted; this reapply also includes a small fix
for a potential source of non-determinism, but also has a small change
to turn off variadic debug value salvaging, to ensure that any future
revert/reapply steps to disable and renable this feature do not risk
causing conflicts.
Differential Revision: https://reviews.llvm.org/D91722
This reverts commit 386b66b2fc.
Use poison instead of undef for cases dealing with unreachable
code. This still leaves the more interesting case of "load from
uninitialized memory" as undef.
This problem is exposed by D104598, after it tail-merges `ret` in
`@test_inline_constraint_S_label`, the verifier would start complaining
`invalid operand for inline asm constraint 'S'`.
Essentially, taking address of a block is mismodelled in IR.
It should probably be an explicit instruction, a first one in block,
that isn't identical to any other instruction of the same type,
so that it can't be hoisted.
Currently, UnrollLoop() is passed an AllowRuntime flag and decides
itself whether runtime unrolling should be used or not. This patch
pushes the decision into the caller and allows us to eliminate the
ULO.TripCount and ULO.TripMultiple parameters.
Differential Revision: https://reviews.llvm.org/D104487
As a follow-up to https://reviews.llvm.org/D104129, I'm cleaning up the danling probe related code in both the compiler and llvm-profgen.
I'm seeing a 5% size win for the pseudo_probe section for SPEC2017 and 10% for Ciner. Certain benchmark such as 602.gcc has a 20% size win. No obvious difference seen on build time for SPEC2017 and Cinder.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D104477
Remove dependence on ULO.TripCount/ULO.TripMultiple from ORE and
debug code. For debug code, print information about all exits.
For optimization remarks, only include the unroll count and the
type of unroll (complete, partial or runtime), but omit detailed
information about exit folding, now that more than one exit may
be folded.
Differential Revision: https://reviews.llvm.org/D104482
Fold all exits based on known trip count/multiple information from
SCEV. Previously only the latch exit or the single exit were folded.
This doesn't yet eliminate ULO.TripCount and ULO.TripMultiple
entirely: They're still used to a) decide whether runtime unrolling
should be performed and b) for ORE remarks. However, the core
unrolling logic is independent of them now.
Differential Revision: https://reviews.llvm.org/D104203
This can be seen as a follow up to commit 0ee439b705,
that changed the second argument of __powidf2, __powisf2 and
__powitf2 in compiler-rt from si_int to int. That was to align with
how those runtimes are defined in libgcc.
One thing that seem to have been missing in that patch was to make
sure that the rest of LLVM also handle that the argument now depends
on the size of int (not using the si_int machine mode for 32-bit).
When using __builtin_powi for a target with 16-bit int clang crashed.
And when emitting libcalls to those rtlib functions, typically when
lowering @llvm.powi), the backend would always prepare the exponent
argument as an i32 which caused miscompiles when the rtlib was
compiled with 16-bit int.
The solution used here is to use an overloaded type for the second
argument in @llvm.powi. This way clang can use the "correct" type
when lowering __builtin_powi, and then later when emitting the libcall
it is assumed that the type used in @llvm.powi matches the rtlib
function.
One thing that needed some extra attention was that when vectorizing
calls several passes did not support that several arguments could
be overloaded in the intrinsics. This patch allows overload of a
scalar operand by adding hasVectorInstrinsicOverloadedScalarOpd, with
an entry for powi.
Differential Revision: https://reviews.llvm.org/D99439
We create flag variable "__llvm_fs_discriminator__" in the binary
to indicate that FSAFDO hierarchical discriminators are used.
This variable might be GC'ed by the linker since it is not explicitly
reference. I initially added the var to the use list in pass
MIRFSDiscriminator but it did not work. It turned out the used global
list is collected in lowering (before MIR pass) and then emitted in
the end of pass pipeline.
Here I add the variable to the use list in IR level's AddDiscriminators
pass. The machine level code is still keep in the case IR's
AddDiscriminators is not invoked. If this is the case, this just use
-Wl,--export-dynamic-symbol=__llvm_fs_discriminator__
to force the emit.
Differential Revision: https://reviews.llvm.org/D103988
This commit mostly just replaces bad uses of `NDEBUG` with uses of
`LLVM_ENABLE_ABI_BREAKING_CHANGES` - the safe way to include ABI
breaking changes (normally extra struct elements in headers).
Differential Revision: https://reviews.llvm.org/D104216
The problematic code pattern in the test is based on:
https://llvm.org/PR50638
If the IfCond is itself the phi that we are trying to remove,
then the loop around line 2835 can end up with something like:
%cmp = select i1 %cmp, i1 false, i1 true
That can then lead to a use-after-free and assert (although
I'm still not seeing that locally in my release + asserts build).
I think this can only happen with unreachable code.
Differential Revision: https://reviews.llvm.org/D104063
We were passing the RecurrenceDescriptor by value to most of the reduction analysis methods, despite it being rather bulky with TrackingVH members (that can be costly to copy). In all these cases we're only using the RecurrenceDescriptor for rather basic purposes (access to types/kinds etc.).
Differential Revision: https://reviews.llvm.org/D104029
This adds a function specialization pass to LLVM. Constant parameters
like function pointers and constant globals are propagated to the callee by
specializing the function.
This is a first version with a number of limitations:
- The pass is off by default, so needs to be enabled on the command line,
- It does not handle specialization of recursive functions,
- It does not yet handle constants and constant ranges,
- Only 1 argument per function is specialised,
- The cost-model could be further looked into, and perhaps related,
- We are not yet caching analysis results.
This is based on earlier work by Matthew Simpson (D36432) and Vinay Madhusudan.
More recently this was also discussed on the list, see:
https://lists.llvm.org/pipermail/llvm-dev/2021-March/149380.html.
The motivation for this work is that function specialisation often comes up as
a reason for performance differences of generated code between LLVM and GCC,
which has this enabled by default from optimisation level -O3 and up. And while
this certainly helps a few cpu benchmark cases, this also triggers in real
world codes and is thus a generally useful transformation to have in LLVM.
Function specialisation has great potential to increase compile-times and
code-size. The summary from some investigations with this patch is:
- Compile-time increases for short compile jobs is high relatively, but the
increase in absolute numbers still low.
- For longer compile-jobs, the extra compile time is around 1%, and very much
in line with GCC.
- It is difficult to blame one thing for compile-time increases: it looks like
everywhere a little bit more time is spent processing more functions and
instructions.
- But the function specialisation pass itself is not very expensive; it doesn't
show up very high in the profile of the optimisation passes.
The goal of this work is to reach parity with GCC which means that eventually
we would like to get this enabled by default. But first we would like to address
some of the limitations before that.
Differential Revision: https://reviews.llvm.org/D93838
Essentially, the cover function simply combines the loop level check and the function level scope into one call. This simplifies several callers and is (subjectively) less error prone.
> This reapplies c0f3dfb9, which was reverted following the discovery of
> crashes on linux kernel and chromium builds - these issues have since
> been fixed, allowing this patch to re-land.
This reverts commit 36ec97f76a.
The change caused non-determinism in the compiler, see comments on the code
review at https://reviews.llvm.org/D91722.
Reverting to unbreak people's builds until that can be addressed.
This also reverts the follow-up "[DebugInfo] Limit the number of values
that may be referenced by a dbg.value" in
a0bd6105d8.
Needs to be discussed more.
This reverts commit 255a5c1baa6020c009934b4fa342f9f6dbbcc46
This reverts commit df2056ff3730316f376f29d9986c9913b95ceb1
This reverts commit faff79b7ca144e505da6bc74aa2b2f7cffbbf23
This reverts commit d2a9020785c6e02afebc876aa2778fa64c5cafd
Unrolling with more iterations than MaxTripCount is pointless, as
those iterations can never be executed. As such, we clamp ULO.Count
to MaxTripCount if it is known. This means we no longer need to
consider iterations after MaxTripCount for exit folding, and the
CompletelyUnroll flag becomes independent of ULO.TripCount.
Differential Revision: https://reviews.llvm.org/D103748
We might want to use it when creating SCEV proper in createSCEV(),
now that we don't `forgetValue()` in `SimplifyIndvar::strengthenOverflowingOperation()`,
which might have caused us to loose some optimization potential.
Loop peeling is currently performed as part of UnrollLoop().
Outside test scenarios, it is always performed with an unroll
count of 1. This means that unrolling doesn't actually do anything
apart from performing post-unroll simplification.
When testing, it's currently possible to specify both an explicit
peel count and an explicit unroll count. This doesn't perform any
sensible operation and may result in miscompiles, see
https://bugs.llvm.org/show_bug.cgi?id=45939.
This patch moves peeling from UnrollLoop() into tryToUnrollLoop(),
so that peeling does not also perform a susequent unroll. We only
run the post-unroll simplifications. Specifying both an explicit
peel count and unroll count is forbidden.
In the future, we may want to support both (non-PGO) peeling a
loop and unrolling it, but this needs to be done by first performing
the peel and then recalculating unrolling heuristics on a now
possibly analyzable loop.
Differential Revision: https://reviews.llvm.org/D103362
When SimplifyIndVars infers IR nowrap flags from SCEV, this may
happen in two ways: Either nowrap flags were already present in
SCEV and just get transferred to IR. Or zero/sign extension of
addrecs infers additional nowrap flags, and those get transferred
to IR. In the latter case, calling forgetValue() ensures that the
newly inferred nowrap flags get propagated to any other SCEV
expressions based on the addrec. However, the invalidation can
also have a major compile-time effect in some cases. For
https://bugs.llvm.org/show_bug.cgi?id=50384 with n=512 compile-
time drops from 7.1s to 0.8s without this invalidation. At the
same time, removing the invalidation doesn't affect any codegen
in test-suite.
Differential Revision: https://reviews.llvm.org/D103424
Some floating point lib calls have ABI attributes that need to be set on
the caller. Found via D103412.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D103415
This builds on D103584. The change eliminates the coupling between unroll heuristic and implementation w.r.t. knowing when the passed in trip count is an exact trip count or a max trip count. In theory the new code is slightly less powerful (since it relies on exact computable trip counts), but in practice, it appears to cover all the same cases. It can also be extended if needed.
The test change shows what appears to be a bug in the existing code around the interaction of peeling and unrolling. The original loop only ran 8 iterations. The previous output had the loop peeled by 2, and then an exact unroll of 8. This meant the loop ran a total of 10 iterations which appears to have been a miscompile.
Differential Revision: https://reviews.llvm.org/D103620
This is a first step towards simplifying the transform interface to be less error prone. The basic idea is that querying SCEV is cheap (since it's cached) and we can just check for properties related to branch folding in the transform method instead of relying on the heuristic part to pass everything in correctly.
Differential Revision: https://reviews.llvm.org/D103584
This cleans up the unroll action into two phases. Phase 1 does the mechanical act of unrolling, and leaves all conditional branches in place. Phase 2 optimizes away some of the conditional branches and then simplifies the loop. The primary benefit of the reordering is that we can delete some special cases dom tree update logic.
Differential Revision: https://reviews.llvm.org/D103561
When rewriting
powf(2.0, itofp(x)) -> ldexpf(1.0, x)
exp2(sitofp(x)) -> ldexp(1.0, sext(x))
exp2(uitofp(x)) -> ldexp(1.0, zext(x))
the wrong type was used for the second argument in the ldexp/ldexpf
libc call, for target architectures with 16 bit "int" type.
The transform incorrectly used a bitcasted function pointer with
a 32-bit argument when emitting the ldexp/ldexpf call for such
targets.
The fault is solved by using the correct function prototype
in the call, by asking TargetLibraryInfo about the size of "int".
TargetLibraryInfo by default derives the size of the int type by
assuming that it is 16 bits for 16-bit architectures, and
32 bits otherwise. If this isn't true for a target it should be
possible to override that default in the TargetLibraryInfo
initializer.
Differential Revision: https://reviews.llvm.org/D99438
ExprValueMap is a map from SCEV * to a set-vector of (Value *, ConstantInt *) pair,
and while the map itself will likely be big-ish (have many keys),
it is a reasonable assumption that each key will refer to a small-ish
number of pairs.
In particular looking at n=512 case from
https://bugs.llvm.org/show_bug.cgi?id=50384,
the small-size of 4 appears to be the sweet spot,
it results in the least allocations while minimizing memory footprint.
```
$ for i in $(ls heaptrack.opt.*.gz); do echo $i; heaptrack_print $i | tail -n 6; echo ""; done
heaptrack.opt.0-orig.gz
total runtime: 14.32s.
calls to allocation functions: 8222442 (574192/s)
temporary memory allocations: 2419000 (168924/s)
peak heap memory consumption: 190.98MB
peak RSS (including heaptrack overhead): 239.65MB
total memory leaked: 67.58KB
heaptrack.opt.1-n1.gz
total runtime: 13.72s.
calls to allocation functions: 7184188 (523705/s)
temporary memory allocations: 2419017 (176338/s)
peak heap memory consumption: 191.38MB
peak RSS (including heaptrack overhead): 239.64MB
total memory leaked: 67.58KB
heaptrack.opt.2-n2.gz
total runtime: 12.24s.
calls to allocation functions: 6146827 (502355/s)
temporary memory allocations: 2418997 (197695/s)
peak heap memory consumption: 163.31MB
peak RSS (including heaptrack overhead): 211.01MB
total memory leaked: 67.58KB
heaptrack.opt.3-n4.gz
total runtime: 12.28s.
calls to allocation functions: 6068532 (494260/s)
temporary memory allocations: 2418985 (197017/s)
peak heap memory consumption: 155.43MB
peak RSS (including heaptrack overhead): 201.77MB
total memory leaked: 67.58KB
heaptrack.opt.4-n8.gz
total runtime: 12.06s.
calls to allocation functions: 6068042 (503321/s)
temporary memory allocations: 2418992 (200646/s)
peak heap memory consumption: 166.03MB
peak RSS (including heaptrack overhead): 213.55MB
total memory leaked: 67.58KB
heaptrack.opt.5-n16.gz
total runtime: 12.14s.
calls to allocation functions: 6067993 (499958/s)
temporary memory allocations: 2418999 (199307/s)
peak heap memory consumption: 187.24MB
peak RSS (including heaptrack overhead): 233.69MB
total memory leaked: 67.58KB
```
While that test may be an edge worst-case scenario,
https://llvm-compile-time-tracker.com/compare.php?from=dee85d47d9f15fc268f7b18f279dac2774836615&to=98a57e31b1947d5bcdf4a5605ac2ab32b4bd5f63&stat=instructions
agrees that this also results in improvements in the usual situations.
When fulling unrolling with a non-latch exit, the latch block is
folded to unreachable. Replace this folding with the existing
changeToUnreachable() helper, rather than performing it manually.
This also moves the fold to happen after the manual DT update
for exit blocks. I believe this is correct in that the conversion
of an unconditional backedge into unreachable should not affect
the DT at all.
Differential Revision: https://reviews.llvm.org/D103340
This does some non-functional cleanup of exit folding during
unrolling. The two main changes are:
* First rewrite latch->header edges, which is unrelated to exit
folding.
* Combine folding for latch and non-latch exits. After the
previous change, the only difference in their logic is that
for non-latch exits we currently only fold "known non-exit"
cases, but not "known exit" cases.
I think this helps a lot to clarify this code and prepare it for
future changes.
Differential Revision: https://reviews.llvm.org/D103333
in stripDebugInfo(). This patch fixes an oversight in
https://reviews.llvm.org/D96181 and also takes into account loop
metadata pointing to other MDNodes that point into the debug info.
rdar://78487175
Differential Revision: https://reviews.llvm.org/D103220
We are deleting `phi` nodes within the for loop, so this makes sure we
increment the iterator before we delete the instruction pointed by the
iterator.
This started to break in
a0be081646.
Reviewed By: dschuff, lebedev.ri
Differential Revision: https://reviews.llvm.org/D103181
Following the addition of salvaging dbg.values using DIArgLists to
reference multiple values, a case has been found where excessively large
DIArgLists are produced as a result of this salvaging, resulting in
large enough performance costs to effectively freeze the compiler.
This patch introduces an upper bound of 16 to the number of values that
may be salvaged into a dbg.value, to limit the impact of these extreme
cases to performance.
Differential Revision: https://reviews.llvm.org/D103162
We really ought to support no_sanitize("coverage") in line with other
sanitizers. This came up again in discussions on the Linux-kernel
mailing lists, because we currently do workarounds using objtool to
remove coverage instrumentation. Since that support is only on x86, to
continue support coverage instrumentation on other architectures, we
must support selectively disabling coverage instrumentation via function
attributes.
Unfortunately, for SanitizeCoverage, it has not been implemented as a
sanitizer via fsanitize= and associated options in Sanitizers.def, but
rolls its own option fsanitize-coverage. This meant that we never got
"automatic" no_sanitize attribute support.
Implement no_sanitize attribute support by special-casing the string
"coverage" in the NoSanitizeAttr implementation. To keep the feature as
unintrusive to existing IR generation as possible, define a new negative
function attribute NoSanitizeCoverage to propagate the information
through to the instrumentation pass.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=49035
Reviewed By: vitalybuka, morehouse
Differential Revision: https://reviews.llvm.org/D102772
Nico Weber