The non-DOT printing does not include the successors of VPregionBlocks.
This patch use the same style for printing successors as for
VPBasicBlock.
I think the printing of successors could be a bit improved further, as
at the moment it is hard to ensure a check line matches all successors.
But that can be done as follow-up.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D103515
This allows cast/dyn_cast'ing from VPUser to recipes. This is needed
because there are VPUsers that are not recipes.
Reviewed By: gilr, a.elovikov
Differential Revision: https://reviews.llvm.org/D100257
This patch updates the code that sinks recipes required for first-order
recurrences to properly handle replicate-regions. At the moment, the
code would just move the replicate recipe out of its replicate-region,
producing an invalid VPlan.
When sinking a recipe in a replicate-region, we have to sink the whole
region. To do that, we first need to split the block at the target
recipe and move the region in between.
This patch also adds a splitAt helper to VPBasicBlock to split a
VPBasicBlock at a given iterator.
Fixes PR50009.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D100751
This patch introduces a helper to obtain an iterator range for the
PHI-like recipes in a block.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D100101
As suggested in D99294, this adds a getVPSingleValue helper to use for
recipes that are guaranteed to define a single value. This replaces uses
of getVPValue() which used to default to I = 0.
This patch simplifies VPSlotTracker by using the recursive traversal
iterator to traverse all blocks in a VPlan in reverse post-order when
numbering VPValues in a plan.
This depends on a fix to RPOT (D100169). It also extends the traversal
unit tests to check RPOT.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D100176
Add an initial version of a helper to determine whether a recipe may
have side-effects.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D100259
For VPWidenPHIRecipes that model all incoming values as VPValue
operands, print those operands instead of printing the original PHI.
D99294 updates recipes of reduction PHIs to use the VPValue for the
incoming value from the loop backedge, making use of this new printing.
The name is included when printing in DOT mode. Also print it in non-DOT
mode after 93a9d2de8f.
This will become more important to distinguish different plans once
VPlans are gradually refined.
I foresee two uses for this:
1) It's easier to use those in debugger.
2) Once we start implementing more VPlan-to-VPlan transformations (especially
inner loop massaging stuff), using the vectorized LLVM IR as CHECK targets in
LIT test would become too obscure. I can imagine that we'd want to CHECK
against VPlan dumps after multiple transformations instead. That would be
easier with plain text dumps than with DOT format.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D96628
This reverts commit 6b053c9867.
The build is broken:
ld.lld: error: undefined symbol: llvm::VPlan::printDOT(llvm::raw_ostream&) const
>>> referenced by LoopVectorize.cpp
>>> LoopVectorize.cpp.o:(llvm::LoopVectorizationPlanner::printPlans(llvm::raw_ostream&)) in archive lib/libLLVMVectorize.a
I foresee two uses for this:
1) It's easier to use those in debugger.
2) Once we start implementing more VPlan-to-VPlan transformations (especially
inner loop massaging stuff), using the vectorized LLVM IR as CHECK targets in
LIT test would become too obscure. I can imagine that we'd want to CHECK
against VPlan dumps after multiple transformations instead. That would be
easier with plain text dumps than with DOT format.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D96628
There are certain loops like this below:
for (int i = 0; i < n; i++) {
a[i] = b[i] + 1;
*inv = a[i];
}
that can only be vectorised if we are able to extract the last lane of the
vectorised form of 'a[i]'. For fixed width vectors this already works since
we know at compile time what the final lane is, however for scalable vectors
this is a different story. This patch adds support for extracting the last
lane from a scalable vector using a runtime determined lane value. I have
added support to VPIteration for runtime-determined lanes that still permit
the caching of values. I did this by introducing a new class called VPLane,
which describes the lane we're dealing with and provides interfaces to get
both the compile-time known lane and the runtime determined value. Whilst
doing this work I couldn't find any explicit tests for extracting the last
lane values of fixed width vectors so I added tests for both scalable and
fixed width vectors.
Differential Revision: https://reviews.llvm.org/D95139
Now that all state for generated instructions is managed directly in
VPTransformState, VPCallBack is no longer needed. This patch updates the
last use of `getOrCreateScalarValue` to instead manage the value
directly in VPTransformState and removes VPCallback.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D95383
This patch updates codegen to use VPValues to manage the generated
scalarized instructions.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D92285
The individual recipes have been updated to manage their operands using
VPUser a while back. Now that the transition is done, we can instead
make VPRecipeBase a VPUser and get rid of the toVPUser helper.
VP blocks keep track of a condition, which is a VPValue. This patch
updates VPBlockBase to manage the value using VPUser, so
replaceAllUsesWith properly updates the condition bit as well.
This is required to enable VP2VP transformations and it helps with
simplifying some of the code required to manage condition bits.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D95382
This patch updates the induction value creation to use VPValues of
recipes to map the created values. This should bring is one step closer
to being able to optimize induction recipes directly in VPlan.
Currently widenIntOrFpInduction also generates vector values for a cast
of the induction, if it exists. Make this explicit by adding the cast
instruction to the values defined by the recipe.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D92284
This patch adds constructors to VPIteration as a cleaner way of
initialising the struct and replaces existing constructions of
the form:
{Part, Lane}
with
VPIteration(Part, Lane)
I have also added a default constructor, which is used by VPlan.cpp
when deciding whether to replicate a block or not.
This refactoring will be required in a later patch that adds more
members and functions to VPIteration.
Differential Revision: https://reviews.llvm.org/D95676
This patch unifies the way recipes and VPValues are printed after the
transition to VPDef.
VPSlotTracker has been updated to iterate over all recipes and all
their defined values to number those. There is no need to number
values in Value2VPValue.
It also updates a few places that only used slot numbers for
VPInstruction. All recipes now can produce numbered VPValues.
The new test case here contains a first order recurrences and an
instruction that is replicated. The first order recurrence forces an
instruction to be sunk _into_, as opposed to after the replication
region. That causes several things to go wrong including registering
vector instructions multiple times and failing to create dominance
relations correctly.
Instead we should be sinking to after the replication region, which is
what this patch makes sure happens.
Differential Revision: https://reviews.llvm.org/D93629
While here, rename the inaccurate getRecurrenceBinOp()
because that was also used to get CmpInst opcodes.
The recurrence/reduction kind should always refer to the
expected opcode for a reduction. SLP appears to be the
only direct caller of createSimpleTargetReduction(), and
that calling code ideally should not be carrying around
both an opcode and a reduction kind.
This should allow us to generalize reduction matching to
use intrinsics instead of only binops.
This patch turns updates VPInstruction to manage the value it defines
using VPDef. The VPValue is used during VPlan construction and
codegeneration instead of the plain IR reference where possible.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D90565
This patch makes VPRecipeBase a direct subclass of VPDef, moving the
SubclassID to VPDef.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D90564
This patch turns updates VPInterleaveRecipe to manage the values it defines
using VPDef. The VPValue is used during VPlan construction and
codegeneration instead of the plain IR reference where possible.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D90562
This patch updates VPWidenMemoryInstructionRecipe to use VPDef
to manage the value it produces instead of inheriting from VPValue.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D90563
VPPredInstPHIRecipe is one of the recipes that was missed during the
initial conversion. This patch adjusts the recipe to also manage its
operand using VPUser.
Update VPReplicateRecipe to inherit from VPValue. This still does not
update scalarizeInstruction to set the result for the VPValue of
VPReplicateRecipe, because this first requires tracking scalar values in
VPTransformState.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D91500
Similar to other patches, this makes VPWidenRecipe a VPValue. Because of
the way it interacts with the reduction code it also slightly alters the
way that VPValues are registered, removing the up front NeedDef and
using getOrAddVPValue to create them on-demand if needed instead.
Differential Revision: https://reviews.llvm.org/D88447
This converts the VPReductionRecipe into a VPValue, like other
VPRecipe's in preparation for traversing def-use chains. It also makes
it a VPUser, now storing the used VPValues as operands.
It doesn't yet change how the VPReductionRecipes are created. It will
need to call replaceAllUsesWith from the original recipe they replace,
but that is not done yet as VPWidenRecipe need to be created first.
Differential Revision: https://reviews.llvm.org/D88382
This patch introduces a new VPDef class, which can be used to
manage VPValues defined by recipes/VPInstructions.
The idea here is to mirror VPUser for values defined by a recipe. A
VPDef can produce either zero (e.g. a store recipe), one (most recipes)
or multiple (VPInterleaveRecipe) result VPValues.
To traverse the def-use chain from a VPDef to its users, one has to
traverse the users of all values defined by a VPDef.
VPValues now contain a pointer to their corresponding VPDef, if one
exists. To traverse the def-use chain upwards from a VPValue, we first
need to check if the VPValue is defined by a VPDef. If it does not have
a VPDef, this means we have a VPValue that is not directly defined
iniside the plan and we are done.
If we have a VPDef, it is defined inside the region by a recipe, which
is a VPUser, and the upwards def-use chain traversal continues by
traversing all its operands.
Note that we need to add an additional field to to VPVAlue to link them
to their defs. The space increase is going to be offset by being able to
remove the SubclassID field in future patches.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D90558
This patch turns VPWidenGEPRecipe into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84683
This patch turns VPWidenSelectRecipe into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84682
This patch turns VPWidenCall into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84681
Florian Hahn