These other platforms are unsupported and untested.
They could be re-added later based on MSan code.
Reviewed By: gbalats, stephan.yichao.zhao
Differential Revision: https://reviews.llvm.org/D104481
This patch handles one particular case of one-iteration loops for which SCEV
cannot straightforwardly prove BECount = 1. The idea of the optimization is to
symbolically execute conditional branches on the 1st iteration, moving in topoligical
order, and only visiting blocks that may be reached on the first iteration. If we find out
that we never reach header via the latch, then the backedge can be broken.
This implementation uses InstSimplify. SCEV version was rejected due to high
compile time impact.
Differential Revision: https://reviews.llvm.org/D102615
Reviewed By: nikic
InstCombine didn't perform (sext bool X) * (sext bool X) --> zext (and X, X) which can result in just (zext X). The patch adds regression tests to check this transformation and adds a check for equality of mul's operands for that case.
Differential Revision: https://reviews.llvm.org/D104193
This patch adds an optional PriorityInlineOrder, which uses the heap to order inlining.
The callsite which size is smaller would have a higher priority.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D104028
This looks like not a practical pattern in our codebase (it could fail
in some sandbox environement).
Instead we print it via standard output, and it is controled by the
-attributor-print-call-graph, this follows a similiar pattern of attributor-print-dep.
InstCombine didn't perform (sext bool X) * (sext bool X) --> zext (and X, X) which can result in just (zext X). The patch adds regression tests to check this transformation and adds a check for equality of mul's operands for that case.
Differential Revision: https://reviews.llvm.org/D104193
This reverts commit 76d0747e08.
If a group has `__llvm_prf_vals` due to static value profiler counters
(`NS!=0`), we cannot make `__llvm_prf_data` private, because a prevailing text
section may reference `__llvm_prf_data` and will cause a `relocation refers to a
discarded section` linker error.
Note: while a `__profc_` group is non-prevailing, it may be referenced by a
prevailing text section due to inlining.
```
group section [ 66] `.group' [__profc__ZN5clang20EmitClangDeclContextERN4llvm12RecordKeeperERNS0_11raw_ostreamE] contains 4 sections:
[Index] Name
[ 67] __llvm_prf_cnts
[ 68] __llvm_prf_vals
[ 69] __llvm_prf_data
[ 70] .rela__llvm_prf_data
```
This should fix PR50683. The wrong assumption was that we
could always know what the callee is when we replace a call site
argument with undef. We wanted to know that to remove the `noundef`
that might be attached to the argument. Since no callee means we
did the propagation on the caller site, there is no need to remove
an attribute. It is only needed if we replace all uses and therefore
pass `undef` instead of the value that was passed in otherwise.
To allow outside AAs that simplify values we need to ensure all value
simplification goes through the Attributor, not AAValueSimplify (or any
of the other AAs we have already like AAPotentialValues). This patch
also introduces an interface for the outside AAs to register
simplification callbacks for an IRPosition. To make this work as
expected we have to pass IRPositions instead of Values in
AAValueSimplify, which makes sense by itself.
If we simplify values we sometimes end up with type mismatches. If the
value is a constant we can often cast it though to still allow
propagation. The logic is now put into a helper and it replaces some
ad hoc things we did before.
This also introduces the AA namespace for abstract attribute related
functions and types.
Differential Revision: https://reviews.llvm.org/D103856
If the target stack is not accessible between different running
"threads" we have to make sure not to create allocas for mallocs
that might be used by multiple "threads". The "use check" is
sufficient to prevent this but if we apply the "free check" we have
to make sure the pointer is not communicated to others before
the free is reached.
Differential Revision: https://reviews.llvm.org/D98608
The initial use for AAExecutionDomain was to determine if a single
thread executes a block. While this is sometimes informative most
of the time, and for other reasons, we actually want to know if it
is the "initial thread". Thus, the thread that started execution on
the current device. The deduction needs to be adjusted in a follow
up as the methods we use right not are looking for the OpenMP thread
id which is resets whenever a thread enters a parallel region. What
we basically want is to look for `llvm.nvvm.read.ptx.sreg.ntid.x` and
equivalent functions.
We invalidated AAReachabilityImpl directly which is not helpful and
confusing as we still used it regardless. We now avoid invalidating it
(not needed anyway) and add checks for the state. This has by itself no
actual effect but prepares for later extensions.
The current naming scheme adds the `dfs$` prefix to all
DFSan-instrumented functions. This breaks mangling and prevents stack
trace printers and other tools from automatically demangling function
names.
This new naming scheme is mangling-compatible, with the `.dfsan`
suffix being a vendor-specific suffix:
https://itanium-cxx-abi.github.io/cxx-abi/abi.html#mangling-structure
With this fix, demangling utils would work out-of-the-box.
Reviewed By: stephan.yichao.zhao
Differential Revision: https://reviews.llvm.org/D104494
This patch is to address https://bugs.llvm.org/show_bug.cgi?id=48857.
Previous attempts can be found in D104007 and D101980.
A lot of discussions can be found in those two patches.
To summarize the bug:
When Clang emits IR for coroutines, the first thing it does is to make a copy of every argument to the local stack, so that uses of the arguments in the function will all refer to the local copies instead of the arguments directly.
However, in some cases we find that arguments are still directly used:
When Clang emits IR for a function that has pass-by-value arguments, sometimes it emits an argument with byval attribute. A byval attribute is considered to be local to the function (just like alloca) and hence it can be easily determined that it does not alias other values. If in the IR there exists a memcpy from a byval argument to a local alloca, and then from that local alloca to another alloca, MemCpyOpt will optimize out the first memcpy because byval argument's content will not change. This causes issues because after a coroutine suspension, the byval argument may die outside of the function, and latter uses will lead to memory use-after-free.
This is only a problem for arguments with either byval attribute or noalias attribute, because only these two kinds are considered local. Arguments without these two attributes will be considered to alias coro_suspend and hence we won't have this problem. So we need to be able to deal with these two attributes in coroutines properly.
For noalias arguments, since coro_suspend may potentially change the value of any argument outside of the function, we simply shouldn't mark any argument in a coroutiune as noalias. This can be taken care of in CoroEarly pass.
For byval arguments, if such an argument needs to live across suspensions, we will have to copy their value content to the frame, not just the pointer.
Differential Revision: https://reviews.llvm.org/D104184
This attribute computes the optimistic live call edges using the attributor
liveness information. This attribute will be used for deriving a
inter-procedural function reachability attribute.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D104059
For ELF, since all counters/data are in a section group (either `comdat any` or
`comdat noduplicates`), and the signature for `comdat any` is `__profc_`, the
D1003372 optimization prerequisite (linker GC cannot discard data variables
while the text section is retained) is always satisified, we can make __profd_
unconditionally private.
Reviewed By: davidxl, rnk
Differential Revision: https://reviews.llvm.org/D103717
This pass emits a floating point compare and a conditional branch,
but if strictfp is enabled we don't emit a constrained compare
intrinsic.
The backend also won't expand the readonly sqrt call this pass inserts
to a sqrt instruction under strictfp. So we end up with 2 libcalls as
seen here. https://godbolt.org/z/oax5zMEWd
Fix these things by disabling the pass.
Differential Revision: https://reviews.llvm.org/D104479
These other platforms are unsupported and untested.
They could be re-added later based on MSan code.
Reviewed By: gbalats, stephan.yichao.zhao
Differential Revision: https://reviews.llvm.org/D104481
Fold all exits based on known trip count/multiple information from
SCEV. Previously only the latch exit or the single exit were folded.
This doesn't yet eliminate ULO.TripCount and ULO.TripMultiple
entirely: They're still used to a) decide whether runtime unrolling
should be performed and b) for ORE remarks. However, the core
unrolling logic is independent of them now.
Differential Revision: https://reviews.llvm.org/D104203
This really isn't talking about vectors in general,
but only about either fixed or scalable vectors,
and it's pretty confusing to see it state
that there aren't any vectors :)
As noted in PR45210: https://bugs.llvm.org/show_bug.cgi?id=45210
...the bug is triggered as Eli say when sext(idx) * ElementSize overflows.
```
// assume that GV is an array of 4-byte elements
GEP = gep GV, 0, Idx // this is accessing Idx * 4
L = load GEP
ICI = icmp eq L, value
=>
ICI = icmp eq Idx, NewIdx
```
The foldCmpLoadFromIndexedGlobal function simplifies GEP+load operation to icmp.
And there is a problem because Idx * ElementSize can overflow.
Let's assume that the wanted value is at offset 0.
Then, there are actually four possible values for Idx to match offset 0: 0x00..00, 0x40..00, 0x80..00, 0xC0..00.
We should return true for all these values, but currently, the new icmp only returns true for 0x00..00.
This problem can be solved by masking off (trailing zeros of ElementSize) bits from Idx.
```
...
=>
Idx' = and Idx, 0x3F..FF
ICI = icmp eq Idx', NewIdx
```
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D99481
At the moment, we create insertelement instructions directly after
LastInst when inserting scalar values in a vector in
VPTransformState::get.
This results in invalid IR when LastInst is a phi, followed by another
phi. In that case, the new instructions should be inserted just after
the last PHI node in the block.
At the moment, I don't think the problematic case can be triggered, but
it can happen once predicate regions are merged and multiple
VPredInstPHI recipes are in the same block (D100260).
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D104188
This can be seen as a follow up to commit 0ee439b705,
that changed the second argument of __powidf2, __powisf2 and
__powitf2 in compiler-rt from si_int to int. That was to align with
how those runtimes are defined in libgcc.
One thing that seem to have been missing in that patch was to make
sure that the rest of LLVM also handle that the argument now depends
on the size of int (not using the si_int machine mode for 32-bit).
When using __builtin_powi for a target with 16-bit int clang crashed.
And when emitting libcalls to those rtlib functions, typically when
lowering @llvm.powi), the backend would always prepare the exponent
argument as an i32 which caused miscompiles when the rtlib was
compiled with 16-bit int.
The solution used here is to use an overloaded type for the second
argument in @llvm.powi. This way clang can use the "correct" type
when lowering __builtin_powi, and then later when emitting the libcall
it is assumed that the type used in @llvm.powi matches the rtlib
function.
One thing that needed some extra attention was that when vectorizing
calls several passes did not support that several arguments could
be overloaded in the intrinsics. This patch allows overload of a
scalar operand by adding hasVectorInstrinsicOverloadedScalarOpd, with
an entry for powi.
Differential Revision: https://reviews.llvm.org/D99439
We create flag variable "__llvm_fs_discriminator__" in the binary
to indicate that FSAFDO hierarchical discriminators are used.
This variable might be GC'ed by the linker since it is not explicitly
reference. I initially added the var to the use list in pass
MIRFSDiscriminator but it did not work. It turned out the used global
list is collected in lowering (before MIR pass) and then emitted in
the end of pass pipeline.
Here I add the variable to the use list in IR level's AddDiscriminators
pass. The machine level code is still keep in the case IR's
AddDiscriminators is not invoked. If this is the case, this just use
-Wl,--export-dynamic-symbol=__llvm_fs_discriminator__
to force the emit.
Differential Revision: https://reviews.llvm.org/D103988
The original implementation calculating UserBonus uses operator ^, which means XOR in C++
language.
At the first glance of reviewing, I thought it should be power, my bad.
It doesn't make sense to use XOR here. So I believe it should be a
carelessness as I made.
Test Plan: check-all
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D104282
Addition of this pass has been botched.
There is no particular reason why it had to be sold as an inseparable part
of new-pm transition. It was added when old-pm was still the default,
and very *very* few users were actually tracking new-pm,
so it's effects weren't measured.
Which means, some of the turnoil of the new-pm transition
are actually likely regressions due to this pass.
Likewise, there has been a number of post-commit feedback
(post new-pm switch), namely
* https://reviews.llvm.org/D37467#2787157 (regresses HW-loops)
* https://reviews.llvm.org/D37467#2787259 (should not be in middle-end, should run after LSR, not before)
* https://reviews.llvm.org/D95789 (an attempt to fix bad loop backedge metadata)
and in the half year past, the pass authors (google) still haven't found time to respond to any of that.
Hereby it is proposed to backout the pass from the pipeline,
until someone who cares about it can address the issues reported,
and properly start the process of adding a new pass into the pipeline,
with proper performance evaluation.
Furthermore, neither google nor facebook reports any perf changes
from this change, so i'm dropping the pass completely.
It can always be re-reverted should/if anyone want to pick it up again.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D104099
This adds support for functions outlined by the IR Outliner to be
recognized by the debugger. The expected behavior is that it will
skip over the instructions included in that section. This is due to the
fact that we can not say which of the original locations the
instructions originated from.
These functions will show up in the call stack, but you cannot step
through them.
Reviewers: paquette, vsk, djtodoro
Differential Revision: https://reviews.llvm.org/D87302
Loops with irreducible cycles may loop infinitely. Those cannot be
removed, unless the loop/function is marked as mustprogress.
Also discussed in D103382.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D104238
This commit mostly just replaces bad uses of `NDEBUG` with uses of
`LLVM_ENABLE_ABI_BREAKING_CHANGES` - the safe way to include ABI
breaking changes (normally extra struct elements in headers).
Differential Revision: https://reviews.llvm.org/D104216
Currently, Loop strengh reduce is not handling loops with scalable stride very well.
Take loop vectorized with scalable vector type <vscale x 8 x i16> for instance,
(refer to test/CodeGen/AArch64/sve-lsr-scaled-index-addressing-mode.ll added).
Memory accesses are incremented by "16*vscale", while induction variable is incremented
by "8*vscale". The scaling factor "2" needs to be extracted to build candidate formula
i.e., "reg(%in) + 2*reg({0,+,(8 * %vscale)}". So that addrec register reg({0,+,(8*vscale)})
can be reused among Address and ICmpZero LSRUses to enable optimal solution selection.
This patch allow LSR getExactSDiv to recognize special cases like "C1*X*Y /s C2*X*Y",
and pull out "C1 /s C2" as scaling factor whenever possible. Without this change, LSR
is missing candidate formula with proper scaled factor to leverage target scaled-index
addressing mode.
Note: This patch doesn't fully fix AArch64 isLegalAddressingMode for scalable
vector. But allow simple valid scale to pass through.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D103939
We canonicalized to these select patterns (poison-safe logic)
with D101191, so we need to reduce 'not' ops when possible
as we would with 'and'/'or' instructions.
This is shown in a secondary example in:
https://llvm.org/PR50389https://alive2.llvm.org/ce/z/BvsESh
As Eli mentioned post-commit in D103378, the result of the freeze may
still be out-of-range according to Alive2. So for now, just limit the
transform to indices that are non-poison.
Ensure that we provide a `Module` when checking if a rename of an intrinsic is necessary.
This fixes the issue that was detected by https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=32288
(as mentioned by @fhahn), after committing D91250.
Note that the `LLVMIntrinsicCopyOverloadedName` is being deprecated in favor of `LLVMIntrinsicCopyOverloadedName2`.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D99173
This patch is to address https://bugs.llvm.org/show_bug.cgi?id=50610.
In computed goto pattern, there are usually a list of basic blocks that are all targets of indirectbr instruction, and each basic block also has address taken and stored in a variable.
CHR pass could potentially clone these basic blocks, which would generate a cloned version of the indirectbr and clonved version of all basic blocks in the list.
However these basic blocks will not have their addresses taken and stored anywhere. So latter SimplifyCFG pass will simply remove all tehse cloned basic blocks, resulting in incorrect code.
To fix this, when searching for scopes, we skip scopes that contains BBs with addresses taken.
Added a few test cases.
Reviewed By: aeubanks, wenlei, hoy
Differential Revision: https://reviews.llvm.org/D103867
Also:
- add driver test (fsanitize-use-after-return.c)
- add basic IR test (asan-use-after-return.cpp)
- (NFC) cleaned up logic for generating table of __asan_stack_malloc
depending on flag.
for issue: https://github.com/google/sanitizers/issues/1394
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D104076
It was found by chance revealing discrepancy between comment (few lines above),
the condition and how re-ordering of instruction is done inside the if statement
it guards. The condition was always evaluated to true.
Differential Revision: https://reviews.llvm.org/D104064
Adds the basic instrumentation needed for stack tagging.
Currently does not support stack short granules or TLS stack histories,
since a different code path is followed for the callback instrumentation
we use.
We may simply wait to support these two features until we switch to
a custom calling convention.
Patch By: xiangzhangllvm, morehouse
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D102901
The problematic code pattern in the test is based on:
https://llvm.org/PR50638
If the IfCond is itself the phi that we are trying to remove,
then the loop around line 2835 can end up with something like:
%cmp = select i1 %cmp, i1 false, i1 true
That can then lead to a use-after-free and assert (although
I'm still not seeing that locally in my release + asserts build).
I think this can only happen with unreachable code.
Differential Revision: https://reviews.llvm.org/D104063
<string> is currently the highest impact header in a clang+llvm build:
https://commondatastorage.googleapis.com/chromium-browser-clang/llvm-include-analysis.html
One of the most common places this is being included is the APInt.h header, which needs it for an old toString() implementation that returns std::string - an inefficient method compared to the SmallString versions that it actually wraps.
This patch replaces these APInt/APSInt methods with a pair of llvm::toString() helpers inside StringExtras.h, adjusts users accordingly and removes the <string> from APInt.h - I was hoping that more of these users could be converted to use the SmallString methods, but it appears that most end up creating a std::string anyhow. I avoided trying to use the raw_ostream << operators as well as I didn't want to lose having the integer radix explicit in the code.
Differential Revision: https://reviews.llvm.org/D103888
We were passing the RecurrenceDescriptor by value to most of the reduction analysis methods, despite it being rather bulky with TrackingVH members (that can be costly to copy). In all these cases we're only using the RecurrenceDescriptor for rather basic purposes (access to types/kinds etc.).
Differential Revision: https://reviews.llvm.org/D104029
This adds a function specialization pass to LLVM. Constant parameters
like function pointers and constant globals are propagated to the callee by
specializing the function.
This is a first version with a number of limitations:
- The pass is off by default, so needs to be enabled on the command line,
- It does not handle specialization of recursive functions,
- It does not yet handle constants and constant ranges,
- Only 1 argument per function is specialised,
- The cost-model could be further looked into, and perhaps related,
- We are not yet caching analysis results.
This is based on earlier work by Matthew Simpson (D36432) and Vinay Madhusudan.
More recently this was also discussed on the list, see:
https://lists.llvm.org/pipermail/llvm-dev/2021-March/149380.html.
The motivation for this work is that function specialisation often comes up as
a reason for performance differences of generated code between LLVM and GCC,
which has this enabled by default from optimisation level -O3 and up. And while
this certainly helps a few cpu benchmark cases, this also triggers in real
world codes and is thus a generally useful transformation to have in LLVM.
Function specialisation has great potential to increase compile-times and
code-size. The summary from some investigations with this patch is:
- Compile-time increases for short compile jobs is high relatively, but the
increase in absolute numbers still low.
- For longer compile-jobs, the extra compile time is around 1%, and very much
in line with GCC.
- It is difficult to blame one thing for compile-time increases: it looks like
everywhere a little bit more time is spent processing more functions and
instructions.
- But the function specialisation pass itself is not very expensive; it doesn't
show up very high in the profile of the optimisation passes.
The goal of this work is to reach parity with GCC which means that eventually
we would like to get this enabled by default. But first we would like to address
some of the limitations before that.
Differential Revision: https://reviews.llvm.org/D93838
This fixes the concern in single element store scalarization that the
alignment of new store may be larger than it should be. It calculates
the largest alignment if index is constant, and a safe one if not.
Reviewed By: lebedev.ri, spatel
Differential Revision: https://reviews.llvm.org/D103419
First we refactor the code which does no wrapping add sequences
match: we need to allow different operand orders for
the key add instructions involved in the match.
Then we use the refactored code trying 4 variants of matching operands.
Originally the code relied on the fact that the matching operands
of the two last add instructions of memory index calculations
had the same LHS argument. But which operand is the same
in the two instructions is actually not essential, so now we allow
that to be any of LHS or RHS of each of the two instructions.
This increases the chances of vectorization to happen.
Reviewed By: volkan
Differential Revision: https://reviews.llvm.org/D103912
SROA sometimes preserves MD_mem_parallel_loop_access and MD_access_group metadata on loads/stores, and sometimes fails to do so. This change adds copying of the MD after other CreateAlignedLoad/CreateAlignedStores. Also fix a case where the metadata was being copied from a load, rather than the store.
Added a LIT test to catch one case.
Patch by Mark Mendell
Differential Revision: https://reviews.llvm.org/D103254
As noted in https://bugs.llvm.org/show_bug.cgi?id=46666, the current behavior of assuming if-conversion safety if a loop is annotated parallel (`!llvm.loop.parallel_accesses`), is not expectable, the documentation for this behavior was since removed from the LangRef again, and can lead to invalid reads.
This was observed in POCL (https://github.com/pocl/pocl/issues/757) and would require similar workarounds in current work at hipSYCL.
The question remains why this was initially added and what the implications of removing this optimization would be.
Do we need an alternative mechanism to propagate the information about legality of if-conversion?
Or is the idea that conditional loads in `#pragma clang loop vectorize(assume_safety)` can be executed unmasked without additional checks flawed in general?
I think this implication is not part of what a user of that pragma (and corresponding metadata) would expect and thus dangerous.
Only two additional tests failed, which are adapted in this patch. Depending on the further direction force-ifcvt.ll should be removed or further adapted.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D103907
Essentially, the cover function simply combines the loop level check and the function level scope into one call. This simplifies several callers and is (subjectively) less error prone.
There is no need to schedule insertelement instructions. The compiler
did not schedule them before it started support their vectorization and
it should not do it after. We pre-schedule them manually when finding
a build vector sequence.
Disabling scheduling of insertelement instructions improves compile
time and vectorization of the very large basic blocks by saving
scheduling budget for other instructions.
Differential Revision: https://reviews.llvm.org/D104026
```
llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:8024:19: warning: loop variable 'VF' of type 'const llvm::ElementCount' creates a copy from type 'const llvm::ElementCount' [-Wrange-loop-analysis]
for (const auto VF : VFCandidates) {
^
llvm-project/llvm/lib/Transforms/Vectorize/LoopVectorize.cpp:8024:8: note: use reference type 'const llvm::ElementCount &' to prevent copying
for (const auto VF : VFCandidates) {
^~~~~~~~~~~~~~~
&
1 warning generated.
```
Differential Revision: https://reviews.llvm.org/D103970
This patch allows folding stepvector + extract to the lane when the lane is
lower than the minimum size of the scalable vector. This fold is possible
because lane X of a stepvector is also X!
For instance, extracting element 3 of a <vscale x 4 x i64>stepvector is 3.
Differential Revision: https://reviews.llvm.org/D103153
Summary:
The current implementation of AANoFreeFloating will incorrectly list floating
point loads and stores as may-free. This prevents other attributor instances
like HeapToStack from pushing some allocations to the stack.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D103975
This allows for using the frame record feature (which uses __hwasan_tls)
independently from however the user wants to access the shadow base, which
prior was only usable if shadow wasn't accessed through the TLS variable or ifuncs.
Frame recording can be explicitly set according to ShadowMapping::WithFrameRecord
in ShadowMapping::init. Currently, it is only enabled on Fuchsia and if TLS is
used, so this should mimic the old behavior.
Added an extra case to prologue.ll that covers this new case.
Differential Revision: https://reviews.llvm.org/D103841
Upon encountering loads/stores on types whose size is not a multiple of 8 bits the SROA pass would either trip an assertion or use logic that was not meant to work with such irregularly-sized types.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D99435
1. Better sorting of scalars to be gathered. Trying to insert
constants/arguments/instructions-out-of-loop at first and only then
the instructions which are inside the loop. It improves hoisting of
invariant insertelements instructions.
2. Better detection of shuffle candidates in gathering function.
3. The cost of insertelement for constants is 0.
Part of D57059.
Differential Revision: https://reviews.llvm.org/D103458
Upon encountering loads/stores on types whose size is not a multiple of 8 bits the SROA pass would either trip an assertion or use logic that was not meant to work with such irregularly-sized types.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D99435
As discussed in the post-commit comments for:
3cdd05e519
It seems to be safe to propagate all flags from the final fneg
except for 'nsz' to the new select:
https://alive2.llvm.org/ce/z/J_APDc
nsz has unique FMF semantics: it is not poison, it is only
"insignificant" in the calculation according to the LangRef.
> This reapplies c0f3dfb9, which was reverted following the discovery of
> crashes on linux kernel and chromium builds - these issues have since
> been fixed, allowing this patch to re-land.
This reverts commit 36ec97f76a.
The change caused non-determinism in the compiler, see comments on the code
review at https://reviews.llvm.org/D91722.
Reverting to unbreak people's builds until that can be addressed.
This also reverts the follow-up "[DebugInfo] Limit the number of values
that may be referenced by a dbg.value" in
a0bd6105d8.
This patch changes LoopUnrollAndJamPass from FunctionPass to LoopNest pass.
The next patch will utilize LoopNest to effectively handle loop nests.
Also, a crash problem on legacy pass manager is fixed.
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D99149
If the `-enable-strict-reductions` flag is set to true, then currently we will
always choose to vectorize the loop with strict in-order reductions. This is
not necessary where we allow the reordering of FP operations, such as
when loop hints are passed via metadata.
This patch moves useOrderedReductions so that we can also check whether
loop hints allow reordering, in which case we should use the default
behaviour of vectorizing with unordered reductions.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D103814
Complete support for fast8:
- amend shadow size and mapping in runtime
- remove fast16 mode and -dfsan-fast-16-labels flag
- remove legacy mode and make fast8 mode the default
- remove dfsan-fast-8-labels flag
- remove functions in dfsan interface only applicable to legacy
- remove legacy-related instrumentation code and tests
- update documentation.
Reviewed By: stephan.yichao.zhao, browneee
Differential Revision: https://reviews.llvm.org/D103745
Needs to be discussed more.
This reverts commit 255a5c1baa6020c009934b4fa342f9f6dbbcc46
This reverts commit df2056ff3730316f376f29d9986c9913b95ceb1
This reverts commit faff79b7ca144e505da6bc74aa2b2f7cffbbf23
This reverts commit d2a9020785c6e02afebc876aa2778fa64c5cafd
Unrolling with more iterations than MaxTripCount is pointless, as
those iterations can never be executed. As such, we clamp ULO.Count
to MaxTripCount if it is known. This means we no longer need to
consider iterations after MaxTripCount for exit folding, and the
CompletelyUnroll flag becomes independent of ULO.TripCount.
Differential Revision: https://reviews.llvm.org/D103748
This is a modified version of a patch by tolziplohu with a style change, and most importantly, a revised commit message.
inttoptr for a non-integral address space is currently ill defined in the LangRef. Figuring out exactly what the dynamic semantics of such a cast would be is hard, and not yet settled. Despite that, we still need to go ahead and implement something in RS4GC for a couple of reasons.
First, as a simple consistency argument. We're apparently added support for constexpr inttoptrs a while back, and even have tests which exercised them. Having a lack of constant folding trigger a crash during lowering is non-ideal.
Second, and more fundementally, the optimizer is allowed to insert undefined constructs in unreachable code. At the same time, we can't assume that dynamically dead code is always pruned before lowering. As a result, we must assume that inttoptrs can occur (even if completely ill defined) along dead paths. We need the lowering to not crash. The stackmaps produced can be garbage (as the assumption is the code is dynamically dead), but the lowering itself can't crash.
Differential Revision: https://reviews.llvm.org/D103492
We need to adjust the FMF propagation on at least
one of these transforms as discussed in:
https://llvm.org/PR49654
...so this should make it easier to intersect flags.
The non-DOT printing does not include the successors of VPregionBlocks.
This patch use the same style for printing successors as for
VPBasicBlock.
I think the printing of successors could be a bit improved further, as
at the moment it is hard to ensure a check line matches all successors.
But that can be done as follow-up.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D103515
This patch is an extension of D103421. It allows the InstCombiner to
generate the negated form of integer scalable-vector splats. It can
technically handle fixed-length vectors too but those are completely
covered by the preceding logic.
This enables extra combining opportunities for scalable vector types.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D103801
This patch abstract Calls in Inliner:run() to InlineOrder.
With this patch, it's possible to customize the inlining order,
e.g. use queue or priority queue.
Reviewed By: kazu
Differential Revision: https://reviews.llvm.org/D103315
This pass transforms loops that contain a conditional branch with induction
variable. For example, it transforms left code to right code:
newbound = min(n, c)
while (iv < n) { while(iv < newbound) {
A A
if (iv < c) B
B C
C }
} if (iv != n) {
while (iv < n) {
A
C
}
}
Differential Revision: https://reviews.llvm.org/D102234
This patch marks the induction increment of the main induction variable
of the vector loop as NUW when not folding the tail.
If the tail is not folded, we know that End - Start >= Step (either
statically or through the minimum iteration checks). We also know that both
Start % Step == 0 and End % Step == 0. We exit the vector loop if %IV +
%Step == %End. Hence we must exit the loop before %IV + %Step unsigned
overflows and we can mark the induction increment as NUW.
This should make SCEV return more precise bounds for the created vector
loops, used by later optimizations, like late unrolling.
At the moment quite a few tests still need to be updated, but before
doing so I'd like to get initial feedback to make sure I am not missing
anything.
Note that this could probably be further improved by using information
from the original IV.
Attempt of modeling of the assumption in Alive2:
https://alive2.llvm.org/ce/z/H_DL_g
Part of a set of fixes required for PR50412.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D103255
This patch abstract Calls in Inliner:run() to InlineOrder.
With this patch, it's possible to customize the inlining order, i.e. use queue or priority queue.
Reviewed By: kazu
Differential Revision: https://reviews.llvm.org/D103315
We might want to use it when creating SCEV proper in createSCEV(),
now that we don't `forgetValue()` in `SimplifyIndvar::strengthenOverflowingOperation()`,
which might have caused us to loose some optimization potential.
Loop peeling is currently performed as part of UnrollLoop().
Outside test scenarios, it is always performed with an unroll
count of 1. This means that unrolling doesn't actually do anything
apart from performing post-unroll simplification.
When testing, it's currently possible to specify both an explicit
peel count and an explicit unroll count. This doesn't perform any
sensible operation and may result in miscompiles, see
https://bugs.llvm.org/show_bug.cgi?id=45939.
This patch moves peeling from UnrollLoop() into tryToUnrollLoop(),
so that peeling does not also perform a susequent unroll. We only
run the post-unroll simplifications. Specifying both an explicit
peel count and unroll count is forbidden.
In the future, we may want to support both (non-PGO) peeling a
loop and unrolling it, but this needs to be done by first performing
the peel and then recalculating unrolling heuristics on a now
possibly analyzable loop.
Differential Revision: https://reviews.llvm.org/D103362
`__profd_*` variables are referenced by code only when value profiling is
enabled. If disabled (e.g. default -fprofile-instr-generate), the symbols just
waste space on ELF/Mach-O. We change the comdat symbol from `__profd_*` to
`__profc_*` because an internal symbol does not provide deduplication features
on COFF. The choice doesn't matter on ELF.
(In -DLLVM_BUILD_INSTRUMENTED_COVERAGE=on build, there is now no `__profd_*` symbols.)
On Windows this enables further optimization. We are no longer affected by the
link.exe limitation: an external symbol in IMAGE_COMDAT_SELECT_ASSOCIATIVE can
cause duplicate definition error.
https://lists.llvm.org/pipermail/llvm-dev/2021-May/150758.html
We can thus use llvm.compiler.used instead of llvm.used like ELF (D97585).
This avoids many `/INCLUDE:` directives in `.drectve`.
Here is rnk's measurement for Chrome:
```
This reduced object file size of base_unittests.exe, compiled with coverage, optimizations, and gmlt debug info by 10%:
#BEFORE
$ find . -iname '*.obj' | xargs du -b | awk '{ sum += $1 } END { print sum}'
1047758867
$ du -cksh base_unittests.exe
82M base_unittests.exe
82M total
# AFTER
$ find . -iname '*.obj' | xargs du -b | awk '{ sum += $1 } END { print sum}'
937886499
$ du -cksh base_unittests.exe
78M base_unittests.exe
78M total
```
The change is NFC for Mach-O.
Reviewed By: davidxl, rnk
Differential Revision: https://reviews.llvm.org/D103372
When SimplifyIndVars infers IR nowrap flags from SCEV, this may
happen in two ways: Either nowrap flags were already present in
SCEV and just get transferred to IR. Or zero/sign extension of
addrecs infers additional nowrap flags, and those get transferred
to IR. In the latter case, calling forgetValue() ensures that the
newly inferred nowrap flags get propagated to any other SCEV
expressions based on the addrec. However, the invalidation can
also have a major compile-time effect in some cases. For
https://bugs.llvm.org/show_bug.cgi?id=50384 with n=512 compile-
time drops from 7.1s to 0.8s without this invalidation. At the
same time, removing the invalidation doesn't affect any codegen
in test-suite.
Differential Revision: https://reviews.llvm.org/D103424
This patch was split from https://reviews.llvm.org/D102246
[SampleFDO] New hierarchical discriminator for Flow Sensitive SampleFDO
This is for llvm-profdata part of change. It sets the bit masks for the
profile reader in llvm-profdata. Also add an internal option
"-fs-discriminator-pass" for show and merge command to process the profile
offline.
This patch also moved setDiscriminatorMaskedBitFrom() to
SampleProfileReader::create() to simplify the interface.
Differential Revision: https://reviews.llvm.org/D103550
This patch changes the `isKnownHeapToStack` and `isAssumedHeapToStack`
member functions to return if a function call is going to be altered by
HeapToStack.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D103574
This is similar to b865eead76 ( D103617 ) and fixes:
https://llvm.org/PR5057541b71f718b did this and more (noted with TODO
comments in the tests), but it didn't handle the case
where the destination is narrower than the source, so
it got reverted.
This is a simple match-and-replace. If there's evidence
that the TODO cases are useful, we can revisit/extend.
Some floating point lib calls have ABI attributes that need to be set on
the caller. Found via D103412.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D103415
This builds on D103584. The change eliminates the coupling between unroll heuristic and implementation w.r.t. knowing when the passed in trip count is an exact trip count or a max trip count. In theory the new code is slightly less powerful (since it relies on exact computable trip counts), but in practice, it appears to cover all the same cases. It can also be extended if needed.
The test change shows what appears to be a bug in the existing code around the interaction of peeling and unrolling. The original loop only ran 8 iterations. The previous output had the loop peeled by 2, and then an exact unroll of 8. This meant the loop ran a total of 10 iterations which appears to have been a miscompile.
Differential Revision: https://reviews.llvm.org/D103620
`__profd_*` variables are referenced by code only when value profiling is
enabled. If disabled (e.g. default -fprofile-instr-generate), the symbols just
waste space on ELF/Mach-O. We change the comdat symbol from `__profd_*` to
`__profc_*` because an internal symbol does not provide deduplication features
on COFF. The choice doesn't matter on ELF.
(In -DLLVM_BUILD_INSTRUMENTED_COVERAGE=on build, there is now no `__profd_*` symbols.)
On Windows this enables further optimization. We are no longer affected by the
link.exe limitation: an external symbol in IMAGE_COMDAT_SELECT_ASSOCIATIVE can
cause duplicate definition error.
https://lists.llvm.org/pipermail/llvm-dev/2021-May/150758.html
We can thus use llvm.compiler.used instead of llvm.used like ELF (D97585).
This avoids many `/INCLUDE:` directives in `.drectve`.
Here is rnk's measurement for Chrome:
```
This reduced object file size of base_unittests.exe, compiled with coverage, optimizations, and gmlt debug info by 10%:
#BEFORE
$ find . -iname '*.obj' | xargs du -b | awk '{ sum += $1 } END { print sum}'
1047758867
$ du -cksh base_unittests.exe
82M base_unittests.exe
82M total
# AFTER
$ find . -iname '*.obj' | xargs du -b | awk '{ sum += $1 } END { print sum}'
937886499
$ du -cksh base_unittests.exe
78M base_unittests.exe
78M total
```
Reviewed By: davidxl, rnk
Differential Revision: https://reviews.llvm.org/D103372
This is a first step towards simplifying the transform interface to be less error prone. The basic idea is that querying SCEV is cheap (since it's cached) and we can just check for properties related to branch folding in the transform method instead of relying on the heuristic part to pass everything in correctly.
Differential Revision: https://reviews.llvm.org/D103584
No need to recalculate the cost of extractelements, just no need to
compensate the cost of all extractelements, need to check before if this
is actually going to be removed at the vectorization. Also, no need to
generate new extractelement instruction, we may just regenerate the
original one. It may improve the final vectorization.
Differential Revision: https://reviews.llvm.org/D102933
This cleans up the unroll action into two phases. Phase 1 does the mechanical act of unrolling, and leaves all conditional branches in place. Phase 2 optimizes away some of the conditional branches and then simplifies the loop. The primary benefit of the reordering is that we can delete some special cases dom tree update logic.
Differential Revision: https://reviews.llvm.org/D103561
tryToVectorizeList function allows to reorder only 2 scalars. Patch
allows to reorder >2 scalars. Also, to avoid possible regressions, it
allows extra vectorization of the remaining parts of the scalars
elements if possible.
Part of D57059.
Differential Revision: https://reviews.llvm.org/D103247
As noticed by NAKAMURA Takumi back in 2017, we cannot use
properlyDominates for std::stable_sort as properlyDominates only
partially orders blocks. That is, for blocks A, B, C, D, where A
dominates B and C dominates D, we have A == C, B == C, but A < B. This
is not a valid comparison function for std::stable_sort and causes
different results between libstdc++ and libc++. This change uses DFS
numbering to give deterministic results for all reachable blocks.
Unreachable blocks are ignored already, so do not need special
consideration.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D103441
Calls must properly match argument ABI attributes with the callee.
Found via D103412.
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D103414
The linkage/visibility of `__profn_*` variables are derived
from the profiled functions.
extern_weak => linkonce
available_externally => linkonce_odr
internal => private
extern => private
_ => unchanged
The linkage/visibility of `__profc_*`/`__profd_*` variables are derived from
`__profn_*` with linkage/visibility wrestling for Windows.
The changes can be folded to the following without changing semantics.
```
if (TT.isOSBinFormatCOFF() && !NeedComdat) {
Linkage = GlobalValue::InternalLinkage;
Visibility = GlobalValue::DefaultVisibility;
}
```
That said, I think we can just delete the code block.
An extern/internal function will now use private `__profc_*`/`__profd_*`
variables, instead of internal ones. This saves some symbol table entries.
A non-comdat {linkonce,weak}_odr function will now use hidden external
`__profc_*`/`__profd_*` variables instead of internal ones. There is potential
object file size increase because such symbols need `/INCLUDE:` directives.
However such non-comdat functions are rare (note that non-comdat weak
definitions don't prevent duplicate definition error).
The behavior changes match ELF.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D103355
Coro-split functions with an active suspend point have their scope line set to
the line of the suspend point. However for compiler generated functions, this
results in debug info with unconventional results: a file named
`<compiler-generated>` with a non-zero line number. The convention for
`<compiler-generated>` is that the line number is zero.
This change propagates the scope line only for non-compiler generated
functions.
Differential Revision: https://reviews.llvm.org/D102412
Without this change, a callsite like:
[[clang::musttail]] return func_call(x);
will cause an error like:
fatal error: error in backend: failed to perform tail call elimination
on a call site marked musttail
due to DFSan inserting instrumentation between the musttail call and
the return.
Reviewed By: stephan.yichao.zhao
Differential Revision: https://reviews.llvm.org/D103542
This patch was split from https://reviews.llvm.org/D102246
[SampleFDO] New hierarchical discriminator for Flow Sensitive SampleFDO
This is mainly for ProfileData part of change. It will load
FS Profile when such profile is detected. For an extbinary format profile,
create_llvm_prof tool will add a flag to profile summary section.
For other format profiles, the users need to use an internal option
(-profile-isfs) to tell the compiler that the profile uses FS discriminators.
This patch also simplified the bit API used by FS discriminators.
Differential Revision: https://reviews.llvm.org/D103041
During Loop Strength Reduce, if the terminating condition for the loop
is not immediately adjacent to the terminating branch and it has more
than one use, a clone of the condition will be created just before the
terminating branch and will be used as the branch condition. Currently,
whether the instructions are "immediately adjacent" is determined by
checking whether the next instruction after the condition is the
terminating branch; this is incorrect however, as the presence of a
debug intrinsic between the two will result in a change to the output.
This is fixed by using getNextNonDebugInstruction() instead.
Differential Revision: https://reviews.llvm.org/D103033
Transfer the swiftasync attribute to the resume partial function according to
suspend.async specification. It's first argument denotes which argument is the
async context.
rdar://71499498
Differential Revision: https://reviews.llvm.org/D103285
This patch uses the calculated maximum scalable VFs to build VPlans,
cost them and select a suitable scalable VF.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D98722
llvm::getLoadStoreType was added recently and has the same implementation
as 'getMemInstValueType' in LoopVectorize.cpp. Since there is no
value in having two implementations, this patch removes the custom LV
implementation in favor of the generic one defined in Instructions.h.
Nick Desaulniers